/*
* yosys -- Yosys Open SYnthesis Suite
*
* Copyright (C) 2012 Claire Xenia Wolf <claire@yosyshq.com>
* (C) 2019 Eddie Hung <eddie@fpgeh.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/
#include "kernel/register.h"
#include "kernel/celltypes.h"
#include "kernel/rtlil.h"
#include "kernel/log.h"
USING_YOSYS_NAMESPACE
PRIVATE_NAMESPACE_BEGIN
struct SynthXilinxPass : public ScriptPass
{
SynthXilinxPass() : ScriptPass("synth_xilinx", "synthesis for Xilinx FPGAs") { }
void on_register() override
{
RTLIL::constpad["synth_xilinx.abc9.xc7.W"] = "300"; // Number with which ABC will map a 6-input gate
// to one LUT6 (instead of a LUT5 + LUT2)
}
void help() override
{
// |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
log("\n");
log(" synth_xilinx [options]\n");
log("\n");
log("This command runs synthesis for Xilinx FPGAs. This command does not operate on\n");
log("partly selected designs. At the moment this command creates netlists that are\n");
log("compatible with 7-Series Xilinx devices.\n");
log("\n");
log(" -top <module>\n");
log(" use the specified module as top module\n");
log("\n");
log(" -family <family>\n");
log(" run synthesis for the specified Xilinx architecture\n");
log(" generate the synthesis netlist for the specified family.\n");
log(" supported values:\n");
log(" - xcup: Ultrascale Plus\n");
log(" - xcu: Ultrascale\n");
log(" - xc7: Series 7 (default)\n");
log(" - xc6s: Spartan 6\n");
log(" - xc6v: Virtex 6\n");
log(" - xc5v: Virtex 5 (EXPERIMENTAL)\n");
log(" - xc4v: Virtex 4 (EXPERIMENTAL)\n");
log(" - xc3sda: Spartan 3A DSP (EXPERIMENTAL)\n");
log(" - xc3sa: Spartan 3A (EXPERIMENTAL)\n");
log(" - xc3se: Spartan 3E (EXPERIMENTAL)\n");
log(" - xc3s: Spartan 3 (EXPERIMENTAL)\n");
log(" - xc2vp: Virtex 2 Pro (EXPERIMENTAL)\n");
log(" - xc2v: Virtex 2 (EXPERIMENTAL)\n");
log(" - xcve: Virtex E, Spartan 2E (EXPERIMENTAL)\n");
log(" - xcv: Virtex, Spartan 2 (EXPERIMENTAL)\n");
log("\n");
log(" -edif <file>\n");
log(" write the design to the specified edif file. writing of an output file\n");
log(" is omitted if this parameter is not specified.\n");
log("\n");
log(" -blif <file>\n");
log(" write the design to the specified BLIF file. writing of an output file\n");
log(" is omitted if this parameter is not specified.\n");
log("\n");
log(" -ise\n");
log(" generate an output netlist suitable for ISE\n");
log("\n");
log(" -nobram\n");
log(" do not use block RAM cells in output netlist\n");
log("\n");
log(" -nolutram\n");
log(" do not use distributed RAM cells in output netlist\n");
log("\n");
log(" -nosrl\n");
log(" do not use distributed SRL cells in output netlist\n");
log("\n");
log(" -nocarry\n");
log(" do not use XORCY/MUXCY/CARRY4 cells in output netlist\n");
log("\n");
log(" -nowidelut\n");
log(" do not use MUXF[5-9] resources to implement LUTs larger than native for\n");
log(" the target\n");
log("\n");
log(" -nodsp\n");
log(" do not use DSP48*s to implement multipliers and associated logic\n");
log("\n");
log(" -noiopad\n");
log(" disable I/O buffer insertion (useful for hierarchical or \n");
log(" out-of-context flows)\n");
log("\n");
log(" -noclkbuf\n");
log(" disable automatic clock buffer insertion\n");
log("\n");
log(" -uram\n");
log(" infer URAM288s for large memories (xcup only)\n");
log("\n");
log(" -widemux <int>\n");
log(" enable inference of hard multiplexer resources (MUXF[78]) for muxes at\n");
log(" or above this number of inputs (minimum value 2, recommended value >= 5)\n");
log(" default: 0 (no inference)\n");
log("\n");
log(" -json <file>\n");
log(" write the design to the specified JSON file. writing of an output file\n");
log(" is omitted if this parameter is not specified.\n");
log("\n");
log(" -run <from_label>:<to_label>\n");
log(" only run the commands between the labels (see below). an empty\n");
log(" from label is synonymous to 'begin', and empty to label is\n");
log(" synonymous to the end of the command list.\n");
log("\n");
log(" -flatten\n");
log(" flatten design before synthesis\n");
log("\n");
log(" -dff\n");
log(" run 'abc'/'abc9' with -dff option\n");
log("\n");
log(" -retime\n");
log(" run 'abc' with '-D 1' option to enable flip-flop retiming.\n");
log(" implies -dff.\n");
log("\n");
log(" -abc9\n");
log(" use new ABC9 flow (EXPERIMENTAL)\n");
log("\n");
log("\n");
log("The following commands are executed by this synthesis command:\n");
help_script();
log("\n");
}
std::string top_opt, edif_file, blif_file, json_file, family;
bool flatten, retime, ise, noiopad, noclkbuf, nobram, nolutram, nosrl, nocarry, nowidelut, nodsp, uram;
bool abc9, dff;
bool flatten_before_abc;
int widemux;
int lut_size;
int widelut_size;
void clear_flags() override
{
top_opt = "-auto-top";
edif_file.clear();
blif_file.clear();
family = "xc7";
flatten = false;
retime = false;
ise = false;
noiopad = false;
noclkbuf = false;
nocarry = false;
nobram = false;
nolutram = false;
nosrl = false;
nocarry = false;
nowidelut = false;
nodsp = false;
uram = false;
abc9 = false;
dff = false;
flatten_before_abc = false;
widemux = 0;
lut_size = 6;
}
void execute(std::vector<std::string> args, RTLIL::Design *design) override
{
std::string run_from, run_to;
clear_flags();
size_t argidx;
for (argidx = 1; argidx < args.size(); argidx++)
{
if (args[argidx] == "-top" && argidx+1 < args.size()) {
top_opt = "-top " + args[++argidx];
continue;
}
if ((args[argidx] == "-family" || args[argidx] == "-arch") && argidx+1 < args.size()) {
family = args[++argidx];
continue;
}
if (args[argidx] == "-edif" && argidx+1 < args.size()) {
edif_file = args[++argidx];
continue;
}
if (args[argidx] == "-blif" && argidx+1 < args.size()) {
blif_file = args[++argidx];
continue;
}
if (args[argidx] == "-run" && argidx+1 < args.size()) {
size_t pos = args[argidx+1].find(':');
if (pos == std::string::npos)
break;
run_from = args[++argidx].substr(0, pos);
run_to = args[argidx].substr(pos+1);
continue;
}
if (args[argidx] == "-flatten") {
flatten = true;
continue;
}
if (args[argidx] == "-flatten_before_abc") {
flatten_before_abc = true;
continue;
}
if (args[argidx] == "-retime") {
dff = true;
retime = true;
continue;
}
if (args[argidx] == "-nocarry") {
nocarry = true;
continue;
}
if (args[argidx] == "-nowidelut") {
nowidelut = true;
continue;
}
if (args[argidx] == "-ise") {
ise = true;
continue;
}
if (args[argidx] == "-iopad") {
continue;
}
if (args[argidx] == "-noiopad") {
noiopad = true;
continue;
}
if (args[argidx] == "-noclkbuf") {
noclkbuf = true;
continue;
}
if (args[argidx] == "-nocarry") {
nocarry = true;
continue;
}
if (args[argidx] == "-nobram") {
nobram = true;
continue;
}
if (args[argidx] == "-nolutram" || /*deprecated alias*/ args[argidx] == "-nodram") {
nolutram = true;
continue;
}
if (args[argidx] == "-nosrl") {
nosrl = true;
continue;
}
if (args[argidx] == "-widemux" && argidx+1 < args.size()) {
widemux = atoi(args[++argidx].c_str());
continue;
}
if (args[argidx] == "-abc9") {
abc9 = true;
continue;
}
if (args[argidx] == "-nodsp") {
nodsp = true;
continue;
}
if (args[argidx] == "-uram") {
uram = true;
continue;
}
if (args[argidx] == "-dff") {
dff = true;
continue;
}
if (args[argidx] == "-json" && argidx+1 < args.size()) {
json_file = args[++argidx];
continue;
}
break;
}
extra_args(args, argidx, design);
if (family == "xcup" || family == "xcu") {
lut_size = 6;
widelut_size = 9;
} else if (family == "xc7" ||
family == "xc6v" ||
family == "xc5v" ||
family == "xc6s") {
lut_size = 6;
widelut_size = 8;
} else if (family == "xc4v" ||
family == "xc3sda" ||
family == "xc3sa" ||
family == "xc3se" ||
family == "xc3s" ||
family == "xc2vp" ||
family == "xc2v") {
lut_size = 4;
widelut_size = 8;
} else if (family == "xcve" || family == "xcv") {
lut_size = 4;
widelut_size = 6;
} else
log_cmd_error("Invalid Xilinx -family setting: '%s'.\n", family.c_str());
if (widemux != 0 && lut_size != 6)
log_cmd_error("-widemux is not currently supported for LUT4-based architectures.\n");
if (lut_size != 6) {
log_warning("Shift register inference not yet supported for family %s.\n", family.c_str());
nosrl = true;
}
if (widemux != 0 && widemux < 2)
log_cmd_error("-widemux value must be 0 or >= 2.\n");
if (!design->full_selection())
log_cmd_error("This command only operates on fully selected designs!\n");
if (abc9 && retime)
log_cmd_error("-retime option not currently compatible with -abc9!\n");
log_header(design, "Executing SYNTH_XILINX pass.\n");
log_push();
run_script(design, run_from, run_to);
log_pop();
}
void script() override
{
std::string lut_size_s = std::to_string(lut_size);
if (help_mode)
lut_size_s = "[46]";
if (check_label("begin")) {
std::string read_args;
read_args += " -lib -specify +/xilinx/cells_sim.v";
run("read_verilog" + read_args);
run("read_verilog -lib +/xilinx/cells_xtra.v");
run(stringf("hierarchy -check %s", top_opt.c_str()));
}
if (check_label("prepare")) {
run("proc");
if (flatten || help_mode)
run("flatten", "(with '-flatten')");
if (active_design)
active_design->scratchpad_unset("tribuf.added_something");
run("tribuf -logic");
if (noiopad && active_design && active_design->scratchpad_get_bool("tribuf.added_something"))
log_error("Tristate buffers are unsupported without the '-iopad' option.\n");
run("deminout");
run("opt_expr");
run("opt_clean");
run("check");
run("opt -nodffe -nosdff");
run("fsm");
run("opt");
if (help_mode)
run("wreduce [-keepdc]", "(option for '-widemux')");
else
run("wreduce" + std::string(widemux > 0 ? " -keepdc" : ""));
run("peepopt");
run("opt_clean");
if (widemux > 0 || help_mode)
run("muxpack", " ('-widemux' only)");
// xilinx_srl looks for $shiftx cells for identifying variable-length
// shift registers, so attempt to convert $pmux-es to this
// Also: wide multiplexer inference benefits from this too
if (!(nosrl && widemux == 0) || help_mode) {
run("pmux2shiftx", "(skip if '-nosrl' and '-widemux=0')");
run("clean", " (skip if '-nosrl' and '-widemux=0')");
}
}
if (check_label("map_dsp", "(skip if '-nodsp')")) {
if (!nodsp || help_mode) {
run("memory_dff"); // xilinx_dsp will merge registers, reserve memory port registers first
// NB: Xilinx multipliers are signed only
if (help_mode)
run("techmap -map +/mul2dsp.v -map +/xilinx/{family}_dsp_map.v {options}");
else if (family == "xc2v" || family == "xc2vp" || family == "xc3s" || family == "xc3se" || family == "xc3sa")
run("techmap -map +/mul2dsp.v -map +/xilinx/xc3s_mult_map.v -D DSP_A_MAXWIDTH=18 -D DSP_B_MAXWIDTH=18 "
"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL18X18");
else if (family == "xc3sda")
run("techmap -map +/mul2dsp.v -map +/xilinx/xc3sda_dsp_map.v -D DSP_A_MAXWIDTH=18 -D DSP_B_MAXWIDTH=18 "
"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL18X18");
else if (family == "xc6s")
run("techmap -map +/mul2dsp.v -map +/xilinx/xc6s_dsp_map.v -D DSP_A_MAXWIDTH=18 -D DSP_B_MAXWIDTH=18 "
"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL18X18");
else if (family == "xc4v")
run("techmap -map +/mul2dsp.v -map +/xilinx/xc4v_dsp_map.v -D DSP_A_MAXWIDTH=18 -D DSP_B_MAXWIDTH=18 "
"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL18X18");
else if (family == "xc5v")
run("techmap -map +/mul2dsp.v -map +/xilinx/xc5v_dsp_map.v -D DSP_A_MAXWIDTH=25 -D DSP_B_MAXWIDTH=18 "
"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL25X18");
else if (family == "xc6v" || family == "xc7")
run("techmap -map +/mul2dsp.v -map +/xilinx/xc7_dsp_map.v -D DSP_A_MAXWIDTH=25 -D DSP_B_MAXWIDTH=18 "
"-D DSP_A_MAXWIDTH_PARTIAL=18 " // Partial multipliers are intentionally
// limited to 18x18 in order to take
// advantage of the (PCOUT << 17) -> PCIN
// dedicated cascade chain capability
"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL25X18");
else if (family == "xcu" || family == "xcup")
run("techmap -map +/mul2dsp.v -map +/xilinx/xcu_dsp_map.v -D DSP_A_MAXWIDTH=27 -D DSP_B_MAXWIDTH=18 "
"-D DSP_A_MAXWIDTH_PARTIAL=18 " // Partial multipliers are intentionally
// limited to 18x18 in order to take
// advantage of the (PCOUT << 17) -> PCIN
// dedicated cascade chain capability
"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL27X18");
run("select a:mul2dsp");
run("setattr -unset mul2dsp");
run("opt_expr -fine");
run("wreduce");
run("select -clear");
if (help_mode)
run("xilinx_dsp -family <family>");
else
run("xilinx_dsp -family " + family);
run("chtype -set $mul t:$__soft_mul");
}
}
if (check_label("coarse")) {
run("techmap -map +/cmp2lut.v -map +/cmp2lcu.v -D LUT_WIDTH=" + lut_size_s);
run("alumacc");
run("share");
run("opt");
run("memory -nomap");
run("opt_clean");
}
if (check_label("map_memory")) {
std::string params = "";
std::string lutrams_map = "+/xilinx/lutrams_<family>_map.v";
std::string brams_map = "+/xilinx/brams_<family>_map.v";
if (help_mode) {
params = " [...]";
} else {
if (family == "xcv" || family == "xcve") {
params += " -lib +/xilinx/lutrams_xcv.txt";
params += " -D IS_VIRTEX";
lutrams_map = "+/xilinx/lutrams_xcv_map.v";
params += " -lib +/xilinx/brams_xcv.txt";
brams_map = "+/xilinx/brams_xcv_map.v";
} else if (family == "xc2v" || family == "xc2vp") {
params += " -lib +/xilinx/lutrams_xcv.txt";
params += " -D IS_VIRTEX2";
lutrams_map = "+/xilinx/lutrams_xcv_map.v";
params += " -lib +/xilinx/brams_xc2v.txt";
brams_map = "+/xilinx/brams_xc2v_map.v";
} else if (family == "xc3s" || family == "xc3se") {
params += " -lib +/xilinx/lutrams_xcv.txt";
lutrams_map = "+/xilinx/lutrams_xcv_map.v";
params += " -lib +/xilinx/brams_xc2v.txt";
brams_map = "+/xilinx/brams_xc2v_map.v";
} else if (family == "xc3sa") {
params += " -lib +/xilinx/lutrams_xcv.txt";
lutrams_map = "+/xilinx/lutrams_xcv_map.v";
params += " -lib +/xilinx/brams_xc2v.txt";
params += " -D HAS_BE";
brams_map = "+/xilinx/brams_xc2v_map.v";
} else if (family == "xc3sda") {
params += " -lib +/xilinx/lutrams_xcv.txt";
lutrams_map = "+/xilinx/lutrams_xcv_map.v";
params += " -lib +/xilinx/brams_xc3sda.txt";
brams_map = "+/xilinx/brams_xc3sda_map.v";
} else if (family == "xc6s") {
params += " -logic-cost-rom 0.015625";
params += " -lib +/xilinx/lutrams_xc5v.txt";
lutrams_map = "+/xilinx/lutrams_xc5v_map.v";
params += " -lib +/xilinx/brams_xc3sda.txt";
params += " -D IS_SPARTAN6";
brams_map = "+/xilinx/brams_xc3sda_map.v";
} else if (family == "xc4v") {
params += " -lib +/xilinx/lutrams_xcv.txt";
lutrams_map = "+/xilinx/lutrams_xcv_map.v";
params += " -lib +/xilinx/brams_xc4v.txt";
params += " -D HAS_CASCADE";
brams_map = "+/xilinx/brams_xc4v_map.v";
} else if (family == "xc5v") {
params += " -logic-cost-rom 0.015625";
params += " -lib +/xilinx/lutrams_xc5v.txt";
lutrams_map = "+/xilinx/lutrams_xc5v_map.v";
params += " -lib +/xilinx/brams_xc4v.txt";
params += " -D HAS_SIZE_36";
params += " -D HAS_CASCADE";
brams_map = "+/xilinx/brams_xc5v_map.v";
} else if (family == "xc6v" || family == "xc7") {
params += " -logic-cost-rom 0.015625";
params += " -lib +/xilinx/lutrams_xc5v.txt";
lutrams_map = "+/xilinx/lutrams_xc5v_map.v";
params += " -lib +/xilinx/brams_xc4v.txt";
params += " -D HAS_SIZE_36";
params += " -D HAS_CASCADE";
params += " -D HAS_CONFLICT_BUG";
params += " -D HAS_MIXWIDTH_SDP";
brams_map = "+/xilinx/brams_xc6v_map.v";
} else if (family == "xcu" || family == "xcup") {
params += " -logic-cost-rom 0.015625";
params += " -lib +/xilinx/lutrams_xcu.txt";
lutrams_map = "+/xilinx/lutrams_xc5v_map.v";
params += " -lib +/xilinx/brams_xc4v.txt";
params += " -D HAS_SIZE_36";
params += " -D HAS_MIXWIDTH_SDP";
params += " -D HAS_ADDRCE";
brams_map = "+/xilinx/brams_xcu_map.v";
if (family == "xcup") {
params += " -lib +/xilinx/urams.txt";
}
}
if (nolutram)
params += " -no-auto-distributed";
if (nobram)
params += " -no-auto-block";
if (!uram)
params += " -no-auto-huge";
}
run("memory_libmap" + params);
run("techmap -map " + lutrams_map);
run("techmap -map " + brams_map);
if (family == "xcup") {
run("techmap -map +/xilinx/urams_map.v");
}
}
if (check_label("map_ffram")) {
if (widemux > 0) {
run("opt -fast -mux_bool -undriven -fine"); // Necessary to omit -mux_undef otherwise muxcover
// performs less efficiently
} else {
run("opt -fast -full");
}
run("memory_map");
}
if (check_label("fine")) {
if (help_mode) {
run("simplemap t:$mux", "('-widemux' only)");
run("muxcover <internal options>", "('-widemux' only)");
} else if (widemux > 0) {
run("simplemap t:$mux");
constexpr int cost_mux2 = 100;
std::string muxcover_args = stringf(" -nodecode -mux2=%d", cost_mux2);
switch (widemux) {
case 2: muxcover_args += stringf(" -mux4=%d -mux8=%d -mux16=%d", cost_mux2+1, cost_mux2+2, cost_mux2+3); break;
case 3:
case 4: muxcover_args += stringf(" -mux4=%d -mux8=%d -mux16=%d", cost_mux2*(widemux-1)-2, cost_mux2*(widemux-1)-1, cost_mux2*(widemux-1)); break;
case 5:
case 6:
case 7:
case 8: muxcover_args += stringf(" -mux8=%d -mux16=%d", cost_mux2*(widemux-1)-1, cost_mux2*(widemux-1)); break;
case 9:
case 10:
case 11:
case 12:
case 13:
case 14:
case 15:
default: muxcover_args += stringf(" -mux16=%d", cost_mux2*(widemux-1)-1); break;
}
run("muxcover " + muxcover_args);
}
run("opt -full");
if (!nosrl || help_mode)
run("xilinx_srl -variable -minlen 3", "(skip if '-nosrl')");
std::string techmap_args = " -map +/techmap.v -D LUT_SIZE=" + lut_size_s;
if (help_mode)
techmap_args += " [-map +/xilinx/mux_map.v]";
else if (widemux > 0)
techmap_args += stringf(" -D MIN_MUX_INPUTS=%d -map +/xilinx/mux_map.v", widemux);
if (!nocarry) {
techmap_args += " -map +/xilinx/arith_map.v";
}
run("techmap " + techmap_args);
run("opt -fast");
}
if (check_label("map_cells")) {
// Needs to be done before logic optimization, so that inverters (inserted
// here because of negative-polarity output enable) are handled.
if (help_mode || !noiopad)
run("iopadmap -bits -outpad OBUF I:O -inpad IBUF O:I -toutpad OBUFT ~T:I:O -tinoutpad IOBUF ~T:O:I:IO A:top", "(skip if '-noiopad')");
std::string techmap_args = "-map +/techmap.v -map +/xilinx/cells_map.v";
if (widemux > 0)
techmap_args += stringf(" -D MIN_MUX_INPUTS=%d", widemux);
run("techmap " + techmap_args);
run("clean");
}
if (check_label("map_ffs")) {
if (family == "xc6s")
run("dfflegalize -cell $_DFFE_?P?P_ r -cell $_SDFFE_?P?P_ r -cell $_DLATCH_?P?_ r", "(for xc6s)");
else if (family == "xc6v" || family == "xc7" || family == "xcu" || family == "xcup")
run("dfflegalize -cell $_DFFE_?P?P_ 01 -cell $_SDFFE_?P?P_ 01 -cell $_DLATCH_?P?_ 01", "(for xc6v, xc7, xcu, xcup)");
else
run("dfflegalize -cell $_DFFE_?P?P_ 01 -cell $_DFFSRE_?PPP_ 01 -cell $_SDFFE_?P?P_ 01 -cell $_DLATCH_?P?_ 01 -cell $_DLATCHSR_?PP_ 01", "(for xc5v and older)");
if (abc9 || help_mode) {
if (dff || help_mode)
run("zinit -all w:* t:$_SDFFE_*", "('-dff' only)");
run("techmap -map +/xilinx/ff_map.v", "('-abc9' only)");
}
}
if (check_label("map_luts")) {
run("opt_expr -mux_undef -noclkinv");
if (flatten_before_abc)
run("flatten");
if (help_mode)
run("abc -luts 2:2,3,6:5[,10,20] [-dff] [-D 1]", "(option for '-nowidelut', '-dff', '-retime')");
else if (abc9) {
if (lut_size != 6)
log_error("'synth_xilinx -abc9' not currently supported for LUT4-based devices.\n");
if (family != "xc7")
log_warning("'synth_xilinx -abc9' not currently supported for the '%s' family, "
"will use timing for 'xc7' instead.\n", family.c_str());
run("read_verilog -icells -lib -specify +/xilinx/abc9_model.v");
std::string abc9_opts;
std::string k = "synth_xilinx.abc9.W";
if (active_design && active_design->scratchpad.count(k))
abc9_opts += stringf(" -W %s", active_design->scratchpad_get_string(k).c_str());
else {
k = stringf("synth_xilinx.abc9.%s.W", family.c_str());
abc9_opts += stringf(" -W %s", RTLIL::constpad.at(k, RTLIL::constpad.at("synth_xilinx.abc9.xc7.W")).c_str());
}
if (nowidelut)
abc9_opts += stringf(" -maxlut %d", lut_size);
if (dff)
abc9_opts += " -dff";
run("abc9" + abc9_opts);
}
else {
std::string abc_opts;
if (lut_size != 6) {
if (nowidelut)
abc_opts += " -lut " + lut_size_s;
else
abc_opts += " -lut " + lut_size_s + ":" + std::to_string(widelut_size);
} else {
if (nowidelut)
abc_opts += " -luts 2:2,3,6:5";
else if (widelut_size == 8)
abc_opts += " -luts 2:2,3,6:5,10,20";
else
abc_opts += " -luts 2:2,3,6:5,10,20,40";
}
if (dff)
abc_opts += " -dff";
if (retime)
abc_opts += " -D 1";
run("abc" + abc_opts);
}
run("clean");
if (help_mode || !abc9)
run("techmap -map +/xilinx/ff_map.v", "(only if not '-abc9')");
// This shregmap call infers fixed length shift registers after abc
// has performed any necessary retiming
if (!nosrl || help_mode)
run("xilinx_srl -fixed -minlen 3", "(skip if '-nosrl')");
std::string techmap_args = "-map +/xilinx/lut_map.v -map +/xilinx/cells_map.v";
techmap_args += " -D LUT_WIDTH=" + lut_size_s;
run("techmap " + techmap_args);
if (help_mode)
run("xilinx_dffopt [-lut4]");
else if (lut_size == 4)
run("xilinx_dffopt -lut4");
else
run("xilinx_dffopt");
run("opt_lut_ins -tech xilinx");
}
if (check_label("finalize")) {
if (help_mode || !noclkbuf)
run("clkbufmap -buf BUFG O:I", "(skip if '-noclkbuf')");
if (help_mode || ise)
run("extractinv -inv INV O:I", "(only if '-ise')");
run("clean");
}
if (check_label("check")) {
run("hierarchy -check");
run("stat -tech xilinx");
run("check -noinit");
run("blackbox =A:whitebox");
}
if (check_label("edif")) {
if (!edif_file.empty() || help_mode)
run(stringf("write_edif -pvector bra %s", edif_file.c_str()));
}
if (check_label("blif")) {
if (!blif_file.empty() || help_mode)
run(stringf("write_blif %s", blif_file.c_str()));
}
if (check_label("json"))
{
if (!json_file.empty() || help_mode)
run(stringf("write_json %s", help_mode ? "<file-name>" : json_file.c_str()));
}
}
} SynthXilinxPass;
PRIVATE_NAMESPACE_END