The initial list of hits was generated with the codespell command
below, and each hit was evaluated and fixed manually while taking
context into consideration.
DIRS="kernel/ frontends/ backends/ passes/ techlibs/"
DIRS="${DIRS} libs/ezsat/ libs/subcircuit"
codespell $DIRS -S *.o -L upto,iff,thru,synopsys,uint
More hits were found by looking through comments and strings manually.
During the addition of DRAM inferring support, the installation of
eagle_bb.v is accidentally removed.
Fix this issue.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
According to the datasheet of Anlogic Eagle FPGAs, The LUTs natively
in an Anlogic FPGA is LUT4 (in MSLICEs) and "Enhanced LUT5" (in
LSLICEs). An "Enhanced LUT5" can be divided into two LUT4s.
So a LUT5 will cost around 2x resource of a LUT4, and a LUT6 will cost
2x resource of a LUT5.
Change the -lut parameter passed to the abc command to pass this cost
info to the ABC process.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
The dbits of DRAM16X4 is wrong set to 2, which leads to waste of DRAM
bits.
Fix the dbits number in the RAM configuration.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
The MSLICEs on the Eagle series of FPGA can be configured as Distributed
RAM.
Enable to synthesis to DRAM.
As the Anlogic software suite doesn't support any 'bx to exist in the
initializtion data of DRAM, do not enable the initialization support of
the inferred DRAM.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
This reverts commit 43030db5ff.
For a synthesis tool, generating EG_LOGIC cells are a good choice, as
they can be furtherly optimized when PnR, although sometimes EG_LOGIC is
not as blackbox as EG_PHY cells (because the latter is more close to the
hardware implementation).
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
This is useful if you want to place FF manually ... can't merge SR in those
because it might make the manual placement invalid
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
In an initial statement, blocking assignments are normally used
and e.g. verilator throws a warning if non-blocking ones are used.
Yosys cannot however properly resolve the interdependencies if
blocking assignments are used in the initialization of SB_RAM_40_4K
and thus this has been used.
This patch will change to use non-blocking assignments only for yosys
Currently, `ice40_opt -unlut` would map SB_LUT4 to $lut and convert
them back to logic immediately. This is not desirable if the goal
is to operate on $lut cells. If this is desirable, the same result
as `ice40_opt -unlut` can be achieved by running simplemap and opt
after ice40_unlut.
whitequark
Clifford Wolf
Larry Doolittle
Icenowy Zheng
Sylvain Munaut
Olof Kindgren
Diego H
Miodrag Milanovic
Eddie Hung
David Shah
David Shah