Commit Graph

10011 Commits

Author SHA1 Message Date
Claire Wolf a6f9e28680
Merge pull request #1971 from YosysHQ/claire/edifkeep
Ignore conflicting keep attributes, unless asked not to
2020-04-21 19:04:55 +02:00
Claire Wolf 9e1afde7a0
Merge pull request #1851 from YosysHQ/claire/bitselwrite
Improved rewrite code for writing to bit slice
2020-04-21 18:46:52 +02:00
whitequark 4aa0f450f5 cxxrtl: use one delta cycle for immediately converging netlists.
If it is statically known that eval() will converge in one delta
cycle (that is, the second commit() will always return `false`)
because the design contains no feedback or buffered wires, then
there is no need to run the second delta cycle at all.

After this commit, the case where eval() always converges immediately
is detected and the second delta cycle is omitted. As a result,
Minerva SRAM SoC runs ~25% faster.
2020-04-21 16:14:45 +00:00
whitequark 7f5313e6c3 cxxrtl: add -O6, a shortcut for running `proc; flatten`.
People judge a compiler backend by the first impression, and
the metric they judge it for is speed. -O6 does severely impact
debuggability, but it provides equally massive gains in performance,
so use it by default.
2020-04-21 15:33:12 +00:00
whitequark 06985c3afd cxxrtl: unbuffer module input wires.
Module input wires are never set by the module, so it is unnecessary
to buffer them. Although important for all inputs, this is especially
critical for clocks, since after this commit, hierarchy levels no
longer add delta cycles. As a result, Minerva SRAM SoC runs ~73%
faster when flattened, and ~264% (!!) faster when hierarchical.
2020-04-21 15:27:19 +00:00
whitequark 12c5e9275c cxxrtl: simplify generated edge detection logic.
This commit changes the way edge detectors are represented in
generated code from a variable that is set in commit() and reset in
eval() to a function that considers .curr and .next of the clock
wire. Behavior remains the same. Besides being simpler to generate
and providing more opportunities for optimization, this commit paves
way for unbuffering module inputs.
2020-04-21 13:59:42 +00:00
whitequark 757cbb3c80 cxxrtl: localize wires with multiple comb drivers, too.
Before this commit, any wire that was not driven by an output port of
exactly one comb cell would not be localized, even if there were no
feedback arcs through that wire. This would cause the wire to become
buffered and require (often quite a few) extraneous delta cycles
during evaluation. To alleviate this problem, -O5 was running
`splitnets -driver`.

However, this solution was mistaken. Because `splitnets -driver`
followed by `opt_clean -purge` would produce more nets with multiple
drivers, it would have to be iterated to fixpoint. Moreover, even if
this was done, it would not be sufficient because `opt_clean -purge`
does not currently remove wires with the `\init` attribute (and it
is not desirable to remove such wires, since they correspond to
registers and may be useful for debugging).

The proper solution is to consider the condition in which a wire
may be localized. Specifically, if there are no feedback arcs through
this wire, and no part of the wire is driven by an output of a sync
cell, then the wire holds no state and is localizable.

After this commit, the original condition for not localizing a wire
is replaced by a check for any sync cell driving it. This makes it
unnecessary to run `splitnets -driver` in the majority of cases
to get a design with no buffered wires, and -O5 no longer includes
that pass. As a result, Minerva SRAM SoC no longer has any buffered
wires, and runs ~27% faster.

In addition, this commit prepares the flow graph for introduction
of sync outputs of black boxes.

Co-authored-by: Jean-François Nguyen <jf@lambdaconcept.com>
2020-04-21 13:36:50 +00:00
whitequark f24fb4ae82 cxxrtl: detect buffered comb wires, not just feedback wires.
Any buffered combinatorial wires (including, as a subset, feedback
wires) will prevent the design from always converging in one delta
cycle. Before this commit, only feedback wires were detected. After
this commit, any buffered combinatorial wires, including feedback
wires, are detected.

Co-authored-by: Jean-François Nguyen <jf@lambdaconcept.com>
2020-04-21 13:36:50 +00:00
Claire Wolf d834cc7afb Add '=' selection pattern prefix for non-blackbox only patterns
Signed-off-by: Claire Wolf <claire@symbioticeda.com>
2020-04-21 14:23:24 +02:00
Claire Wolf 27506d2aeb Improve net priorities in EDIF back-end
Signed-off-by: Claire Wolf <claire@symbioticeda.com>
2020-04-21 12:35:25 +02:00
David Shah abf81c7639 sim: Fix handling of constant-connected cell inputs at startup
Signed-off-by: David Shah <dave@ds0.me>
2020-04-21 08:58:52 +01:00
whitequark abc8f1fcb6
Merge pull request #1961 from whitequark/paramod-original-name
ast, rpc: record original name of $paramod\* as \hdlname attribute
2020-04-21 01:43:20 +00:00
Eddie Hung 38ee59184c tests: remove write_ilang 2020-04-20 15:42:29 -07:00
Eddie Hung d32e56a3d1
Merge pull request #1975 from dh73/claire/bitselwrite
Adding tests to Claire/bitselwrite branch
2020-04-20 15:34:31 -07:00
Eddie Hung caf4071c8b Remove '-ignore_unknown_cells' option from 'sat' 2020-04-20 11:58:23 -07:00
Eddie Hung a1573058e9 Simplify test case script 2020-04-20 11:54:10 -07:00
Eddie Hung 99a0958601 Remove ununsed files 2020-04-20 11:53:48 -07:00
Eddie Hung c506da3819
Merge pull request #1972 from YosysHQ/eddie/bug1970
abc9_ops: -prep_lut to be more robust
2020-04-20 11:39:13 -07:00
Eddie Hung 3d7b983351 abc9: tolerate ABC nonzero exit code if output.aig; write before &mfs
Re-enable mfs for xilinx/ecp5 speculatively -- if it fails, use pre-mfs
result
2020-04-20 11:26:11 -07:00
diego 22f440506b Modifications of tests as per Eddie's request 2020-04-20 12:45:35 -05:00
Eddie Hung a998a4155d xilinx/ecp5: disable abc9's "&mfs" optimisation
Can sometimes fire an assertion, e.g. #1962
2020-04-20 10:30:10 -07:00
Eddie Hung 8c992ca47f abc9: -prep_lut to be more robust 2020-04-20 09:39:35 -07:00
Eddie Hung 34d8ff8b56 abc9: add testcase reduced from #1970 2020-04-20 09:38:29 -07:00
Claire Wolf ee5067e864 Ignore conflicting keep attributes, unless asked not to. Fixes #1733
Signed-off-by: Claire Wolf <claire@symbioticeda.com>
2020-04-20 16:00:37 +02:00
Claire Wolf ae115fa3aa
Merge pull request #1964 from YosysHQ/claire/sformatf
Extend support for format strings in Verilog front-end
2020-04-20 14:51:40 +02:00
Alberto Gonzalez ecaa892e35
Add rvalue-reference-accepting `entry_t` constructor for `pool`. 2020-04-20 05:37:10 +00:00
Alberto Gonzalez 95b94ad19b
In `pool`, construct `entry_t`s in-place and add an rvalue-accepting-and-forwarding `insert()` method. 2020-04-20 02:18:30 +00:00
whitequark 2b1fb8c0a0
Merge pull request #1967 from whitequark/cxxrtl-blackbox-attributes
cxxrtl: provide attributes to black box factories, too
2020-04-19 19:59:42 +00:00
whitequark bf0f96b847 cxxrtl: provide attributes to black box factories, too.
Both parameters and attributes are necessary because the parameters
have to be the same between every instantiation of the cell, but
attributes may well vary. For example, for an UART PHY, the type
of the PHY (tty, pty, socket) would be a parameter, but configuration
of the implementation specified by the type (socket address) would
be an attribute.
2020-04-19 16:30:54 +00:00
Claire Wolf 35990b95ec Extend support for format strings in Verilog front-end
Signed-off-by: Claire Wolf <claire@symbioticeda.com>
2020-04-18 14:08:51 +02:00
whitequark c98cde8842
Merge pull request #1963 from whitequark/cxxrtl-blackboxes
cxxrtl: add support for simple and templated C++ black boxes
2020-04-18 09:21:14 +00:00
whitequark 63d2a30857 cxxrtl: add templated black box support. 2020-04-18 08:04:57 +00:00
whitequark ab4297c326 cxxrtl: make eval() and commit() inline in blackboxes.
This change is a preparation for template blackboxes. It has no
effect on current generated code.
2020-04-18 04:38:50 +00:00
whitequark 2b88d9a3fe cxxrtl: add simple black box support.
This commit adds support for replacing RTLIL modules with CXXRTL
black boxes. Black box port widths may not depend on the parameters
with which it is instantiated (yet); the parameters may only be used
to change the behavior of the black box.
2020-04-18 04:35:10 +00:00
whitequark 8bc3cd30dc cxxrtl: use ID::X instead of ID(X). NFC. 2020-04-18 04:35:10 +00:00
whitequark 41421f5dca ast, rpc: record original name of $paramod\* as \hdlname attribute.
The $paramod name mangling is not invertible (the \ character, which
separates the module name from the parameters, is valid in the module
name itself), which does not stop people from trying to invert it.

This commit makes it easy to invert the name mangling by storing
the original name explicitly, and fixes the firrtl backend to use
the newly introduced attribute.
2020-04-18 03:47:28 +00:00
whitequark d42530b7bb
Merge pull request #1955 from whitequark/cxxrtl-sync_always
cxxrtl: correctly handle `sync always` rules
2020-04-17 21:36:59 +00:00
whitequark 67fbc00a18
Merge pull request #1952 from boqwxp/add_edge_location
Verilog frontend: add source location in more parser rules
2020-04-17 18:57:00 +00:00
diego 50581d5a94 Wrong fixed value 2020-04-17 10:15:22 -05:00
whitequark e7ad209b15 cxxrtl: correctly handle `sync always` rules.
Fixes #1948.
2020-04-17 09:43:13 +00:00
whitequark 115fc261e6
Merge pull request #1954 from YosysHQ/dave/fix-stdout-conflict
qbfsat: Fix illegal use of 'stdout' identifier
2020-04-17 09:07:49 +00:00
whitequark 4d1db12133
Merge pull request #1951 from whitequark/rtlil-string_attribute
rtlil: add AttrObject::{get,set}_string_attribute, AttrObject::has_attribute
2020-04-17 09:06:40 +00:00
David Shah 586739ecf3 qbfsat: Fix illegal use of 'stdout' identifier
Signed-off-by: David Shah <dave@ds0.me>
2020-04-17 08:42:39 +01:00
Alberto Gonzalez 00d74f0b9c
Set Verilog source location for explicit blocks (`begin` ... `end`). 2020-04-17 06:23:03 +00:00
Alberto Gonzalez 10a814f978
Add Verilog source location information to `AST_POSEDGE` and `AST_NEGEDGE` nodes. 2020-04-17 06:16:59 +00:00
whitequark c69db910ac
Merge pull request #1898 from boqwxp/locations
Verilog frontend: add location information to parsed constants
2020-04-17 02:27:13 +00:00
whitequark 69743aad42
Merge pull request #1864 from boqwxp/cleanup_techmap_abc
Clean up pseudo-private member usage and simplify `passes/techmap/abc.cc`
2020-04-17 02:25:18 +00:00
whitequark f2064c8131
Merge pull request #1888 from boqwxp/cleanup_scatter
Clean up `passes/cmds/scatter.cc`.
2020-04-17 02:21:23 +00:00
whitequark 5c428996a9
Merge pull request #1882 from boqwxp/cleanup_rename
Clean up pseudo-private member usage in `passes/cmds/rename.cc`.
2020-04-17 02:20:54 +00:00
whitequark 31e3e52988
Merge pull request #1929 from YosysHQ/eddie/select_unset
select: add select -unset option
2020-04-16 22:09:25 +00:00