In two places, we are joining label pieces by a '|' separator. We go
about it by putting the separator behind each entry, then removing the
trailing separator in a final fixup pass on the built string. For easier
reading, replace those occurrences by a new factored-out
'join_label_pieces' function.
Signed-off-by: Martin Povišer <povik@cutebit.org>
When the 'show' pass generates portboxes to detail the connection of
cell ports to wires, it has special handling of signal chunk
repetitions, but those repetitions are not accounted for in the
displayed bit range in case of cell outputs. Fix that, and so bring it
into consistence with the behavior on cell inputs.
So, taking for example the following Verilog snippet,
module DRIVER (Q);
output [7:0] Q;
assign Q = 8'b10101010;
endmodule
module main;
wire w;
DRIVER driver(.Q({8{w}}));
endmodule
make the show pass display '7:0 - 8x 0:0' in the driver-to-w portbox
instead of '7:7 - 8x 0:0' which it displayed formerly.
Signed-off-by: Martin Povišer <povik@cutebit.org>
This adds the xprop_decoder attribute to bwmuxes that drive the original
unencoded signals. Setundef is changed to ignore the x inputs of these
bwmuxes, so that they survive the prep script of SBY's formal flow. This
is required to make simulation (via sim) using the prep model show the
decoded x signals instead of 0/1 values made up by the solver.
Uses the regex below to search (using vscode):
^\t\tlog\("(.{10,}(?<!\\n)|.{81,}\\n)"\);
Finds any log messages double indented (which help messages are)
and checks if *either* there are is no newline character at the end,
*or* the number of characters before the newline is more than 80.
These can be used to protect undefined flip-flop initialization values
from optimizations that are not sound for formal verification and can
help mapping all solver-provided values in witness traces for flows that
use different backends simultaneously.
Both of these options consider a selection containing only empty modules
as non-empty. This wasn't mentioned in the documentation nor did the
error message when using `select -assert-none` list those empty modules,
which produced a very confusing error message complaining about a
non-empty selection followed by an empty listing of the selection.
This fixes the documentation and changes the `-assert-none` and
`-assert-any` assertion error messages to also output fully selected
modules (this includes selected empty modules).
It doesn't change the messages for `-assert-count` etc. as they don't
count modules.
There will soon be more (versioned) memory cells, so handle passes that
only care if a cell is memory-related by a simple helper call instead of
a hardcoded list.
Bugpoint's current documentation does specify that the result of a run is stored as the current design,
however it's easy to skim over what that means in practice.
Add a documentation comment to explain specifically that an after bugpoint `write_xyz` pass is required to save
the reduced design.
The only difference between "RTLIL" and "ILANG" is that the latter is
the text representation of the former, as opposed to the in-memory
graph representation. This distinction serves no purpose but confuses
people: it is not obvious that the ILANG backend writes RTLIL graphs.
Passes `write_ilang` and `read_ilang` are provided as aliases to
`write_rtlil` and `read_rtlil` for compatibility.
Rather than assigning specific weights to specific versions of taint tracking logic and summing the weights of all GLIFT cells, sum the following values for each GLIFT cell:
- 0 if the associated hole/$anyconst cell value is non-zero, i.e. reduced-precision taint tracking logic is chosen at this cell
- 1 if the associated hole/$anyconst cell value is zero, i.e. the full-precision taint tracking logic is chosen at this cell
This simplified cost modeling reduces the potential for the QBF-SAT solver to minimize taint tracking logic area but significantly simplifies the QBF-SAT problem.
The new types include:
- FFs with async reset and enable (`$adffe`, `$_DFFE_[NP][NP][01][NP]_`)
- FFs with sync reset (`$sdff`, `$_SDFF_[NP][NP][01]_`)
- FFs with sync reset and enable, reset priority (`$sdffs`, `$_SDFFE_[NP][NP][01][NP]_`)
- FFs with sync reset and enable, enable priority (`$sdffce`, `$_SDFFCE_[NP][NP][01][NP]_`)
- FFs with async reset, set, and enable (`$dffsre`, `$_DFFSRE_[NP][NP][NP][NP]_`)
- latches with reset or set (`$adlatch`, `$_DLATCH_[NP][NP][01]_`)
The new FF types are not actually used anywhere yet (this is left
for future commits).
The $div and $mod cells use truncating division semantics (rounding
towards 0), as defined by e.g. Verilog. Another rounding mode, flooring
(rounding towards negative infinity), can be used in e.g. VHDL. The
new $divfloor cell provides this flooring division.
This commit also fixes the handling of $div in opt_expr, which was
previously optimized as if it was $divfloor.
The $div and $mod cells use truncating division semantics (rounding
towards 0), as defined by e.g. Verilog. Another rounding mode, flooring
(rounding towards negative infinity), can be used in e.g. VHDL. The
new $modfloor cell provides this flooring modulo (also known as "remainder"
in several languages, but this name is ambiguous).
This commit also fixes the handling of $mod in opt_expr, which was
previously optimized as if it was $modfloor.
Before this patch, the code passed around std::string objects by
value. It's probably not a hot-spot, but it can't hurt to avoid the
copying.
Removing the copy and clean-up code means the resulting code is ~6.1kb
smaller when compiled with GCC 9.3 and standard settings.
- Pass a string argument by reference
- Avoid multiple calls to IdString::str and IdString::c_str
- Avoid combining checks for size > 0 and first char (C strings are
null terminated, so foo[0] != '\0' implies that foo has positive
length)
With GCC 9.3, at least, compiling select.cc spits out a warning about
an implausible bound being passed to strncmp. This comes from inlining
IdString::compare(): it turns out that passing std::string::npos as a
bound to strncmp triggers it.
This patch replaces the compare call with a memcmp with the same
effect. The repeated calls to IdString::c_str are slightly
inefficient, but I'll address that in a follow-up commit.
This includes the following significant changes:
* Patching ezsat and minisat to disable resource limiting code
on WASM/WASI, since the POSIX functions they use are unavailable.
* Adding a new definition, YOSYS_DISABLE_SPAWN, present if platform
does not support spawning subprocesses (i.e. Emscripten or WASI).
This definition hides the definition of `run_command()`.
* Adding a new Makefile flag, DISABLE_SPAWN, present in the same
condition. This flag disables all passes that require spawning
subprocesses for their function.
gatecat
Claire Xenia Wolf
Miodrag Milanovic
Martin Povišer
Jannis Harder
N. Engelhardt
Peter Gadfort
KrystalDelusion
Kamyar Mohajerani
KrystalDelusion
Aki Van Ness
Lofty
George Rennie
bfg86
Marcelina Kościelnicka
Catherine
Zachary Snow
Iris Johnson
umarcor
N. Engelhardt
Alberto Gonzalez
clairexen
Eddie Hung
Xiretza
Rupert Swarbrick
Claire Wolf