The recent fix for case expression width detection causes the width of
the expressions to be queried before they are simplified. Because the
logic supporting module scope identifiers only existed in simplify,
looking them up would fail during width detection. This moves the logic
to a common helper used in both simplify() and detectSignWidthWorker().
- The case expression and case item expressions are extended to the
maximum width among them, and are only interpreted as signed if all of
them are signed
- Add overall width and sign detection for AST_CASE
- Add sign argument to genWidthRTLIL helper
- Coverage for both const and non-const case statements
* xilinx: add SCC test for DSP48E1
* xilinx: Gate DSP48E1 being a whitebox behind ALLOW_WHITEBOX_DSP48E1
Have a test that checks it works through ABC9 when enabled
* abc9 to break SCCs using $__ABC9_SCC_BREAKER module
* Add test
* abc9_ops: remove refs to (* abc9_keep *) on wires
* abc9_ops: do not bypass cells in an SCC
* Add myself to CODEOWNERS for abc9*
* Fix compile
* abc9_ops: run -prep_hier before scc
* Fix tests
* Remove bug reference pending fix
* abc9: fix for -prep_hier -dff
* xaiger: restore PI handling
* abc9_ops: -prep_xaiger sigmap
* abc9_ops: -mark_scc -> -break_scc
* abc9: eliminate hard-coded abc9.box from tests
Also tidy up
* Address review
Calling log_signal is problematic for several reasons:
- with recent changes, empty string is serialized as { }, which violates
the "no spaces in IdString" rule
- the type (plain / real / signed / string) is dropped, wrongly conflating
functionally different values and potentially introducing a subtle
elaboration bug
Instead, use a custom simple serialization scheme.
This breaks the ability to use a global typename as a standard
identifier in a subsequent input file. This is otherwise backwards
compatible, including for sources which previously included conflicting
typedefs in each input file.
From IEEE1364-2005, section 7.3 buf and not gates:
> These two logic gates shall have one input and one or more outputs.
> The last terminal in the terminal list shall connect to the input of the
> logic gate, and the other terminals shall connect to the outputs of
> the logic gate.
yosys does not follow this and instead interprets the first argument as
the output, the second as the input and ignores the rest.
The already-existing special case for conditionals on clock has been
remade as follows:
- now triggered for the last remaining edge trigger after all others
have been converted to async reset, not just when there is only one
sync rule in the first place
- does not require all contained assignments to be constant, as opposed
to a reset conditional — merely const-folds the condition
In addition, the code has been refactored a bit; as a bonus, the
priority order of async resets found is now preserved in resulting sync
rule ordering (though this is not yet respected by proc_dff).
Fixes#2656.
Among other problems, this also fixes equality comparisons between
SigSpec by enforcing a canonical form.
Also fix another minor issue with possible non-canonical SigSpec.
Fixes#2623.
This defers the simplification of globals so that globals in one file
may depend on globals in other files. Adds a simplify() call downstream
because globals are appended at the end.
It was previously possible to override global parameters on a
per-instance basis. This could be dangerous when using positional
parameter bindings, hiding oversupplied parameters.
- Modules with a parameter without a default value will be automatically
deferred until the hierarchy pass
- Allows for parameters without defaults as module items, rather than
just int the `parameter_port_list`, despite being forbidden in the LRM
- Check for parameters without defaults that haven't been overriden
- Add location info to parameter/localparam declarations
Declaring the ports as standard module items already worked as expected.
This adds a missing usage of `checkRange()` so that headers such as
`module m(output integer x);` now work correctly.
New test cases on one branch may be automatically copied from simple/ to
simple_abc9/, causing failures when switching to another branch. This
updates the simple_abc9 script to set aside extraneous tests in a
non-destructive way.
- Standard data declarations can now use any integer type
- Parameters and localparams can now use any integer type
- Function returns types can now use any integer type
- Fix `parameter logic`, `localparam reg`, etc. to be 1 bit (previously 32 bits)
- Added longint type (64 bits)
- Unified parser source for integer type widths
- Simplify synthetic localparams for normal calls to update their width
- This step was inadvertently removed alongside `added_mod_children`
- Support redeclaration of constant function arguments
- `eval_const_function` never correctly handled this, but the issue
was not exposed in the existing tests until the recent change to
always attempt constant function evaluation when all-const args
are used
- Check asserts in const_arg_loop and const_func tests
- Add coverage for width mismatch error cases
This would previously complain about an undefined internal macro if the
unapplied macro had not already been used. If it had, it would
incorrectly use the arguments from the previous invocation.
This adds a mechanism for marking certain portions of elaboration as
occurring within unevaluated ternary branches. To enable elaboration of
the overall ternary, this also adds width detection for these
unelaborated function calls.
This is a somewhat obscure edge case I encountered while working on test
cases for earlier changes. Declarations in generate blocks should not be
checked against the list of ports. This change also adds a check
forbidding declarations within generate blocks being tagged as inputs or
outputs.
This fixes binding signed memory reads, signed unary expressions, and
signed complex SigSpecs to ports. This also sets `is_signed` for wires
generated from signed params when -pwires is used. Though not necessary
for any of the current usages, `is_signed` is now appropriately set when
the `extendWidth` helper is used.
Elaboration now attempts constant evaluation of any function call with
only constant arguments, regardless of the context or contents of the
function. This removes the concept of "recommended constant evaluation"
which previously applied to functions with `for` loops or which were
(sometimes erroneously) identified as recursive. Any function call in a
constant context (e.g., `localparam`) or which contains a constant-only
procedural construct (`while` or `repeat`) in its body will fail as
before if constant evaluation does not succeed.
This change set contains a number of bug fixes and improvements related to
scoping and resolution in generate and procedural blocks. While many of the
frontend changes are interdependent, it may be possible bring the techmap
changes in under a separate PR.
Declarations within unnamed generate blocks previously encountered issues
because the data declarations were left un-prefixed, breaking proper scoping.
The LRM outlines behavior for generating names for unnamed generate blocks. The
original goal was to add this implicit labelling, but doing so exposed a number
of issues downstream. Additional testing highlighted other closely related scope
resolution issues, which have been fixed. This change also adds support for
block item declarations within unnamed blocks in SystemVerilog mode.
1. Unlabled generate blocks are now implicitly named according to the LRM in
`label_genblks`, which is invoked at the beginning of module elaboration
2. The Verilog parser no longer wraps explicitly named generate blocks in a
synthetic unnamed generate block to avoid creating extra hierarchy levels
where they should not exist
3. The techmap phase now allows special control identifiers to be used outside
of the topmost scope, which is necessary because such wires and cells often
appear in unlabeled generate blocks, which now prefix the declarations within
4. Some techlibs required modifications because they relied on the previous
invalid scope resolution behavior
5. `expand_genblock` has been simplified, now only expanding the outermost
scope, completely deferring the inspection and elaboration of nested scopes;
names are now resolved by looking in the innermost scope and stepping outward
6. Loop variables now always become localparams during unrolling, allowing them
to be resolved and shadowed like any other identifier
7. Identifiers in synthetic function call scopes are now prefixed and resolved
in largely the same manner as other blocks
before: `$func$\func_01$tests/simple/scopes.blk.v:60$5$\blk\x`
after: `\func_01$func$tests/simple/scopes.v:60$5.blk.x`
8. Support identifiers referencing a local generate scope nested more
than 1 level deep, i.e. `B.C.x` while within generate scope `A`, or using a
prefix of a current or parent scope, i.e. `B.C.D.x` while in `A.B`, `A.B.C`,
or `A.B.C.D`
9. Variables can now be declared within unnamed blocks in SystemVerilog mode
Addresses the following issues: 656, 2423, 2493
The presence of IS_*_INVERTED on FD* cells follows Vivado, which
apparently has been decided by a dice roll. Just assume false if the
parameter doesn't exist.
Fixes#2559.
The changes in #2476 ensured that function inputs like `input x;`
retained their single-bit size when instantiated with a constant
argument and turned into a localparam. That change did not handle the
possibility for an input to be redeclared later on with an explicit
width, such as `integer x;`.
- Signed cell outputs are sign extended when bound to larger wires
- Signed connections are sign extended when bound to larger cell inputs
- Sign extension is performed in hierarchy and flatten phases
- genrtlil indirects signed constants through signed wires
- Other phases producing RTLIL may need to be updated to preserve
signedness information
- Resolves#1418
- Resolves#2265
This test pretty much passes by accident — the `prep` command runs
memory_collect without memory_dff first, which prevents merging read
register into the memory, and thus blocks block RAM inference for a
reason completely unrelated to the attribute.
The attribute setting didn't actually work because it was set on the
containing module instead of the actual memory.
When the register being merged into the EN signal happens to be a $sdff,
the current code creates a new $mux for every bit, even if they happen
to be identical (as is usually the case), preventing proper grouping
further down the flow. Fix this by adding a simple cache.
Fixes#2409.
Previously, `$memwr` and `$meminit` cells were always preserved (along
with the memory itself). With this change, they are instead part of the
main cell mark-and-sweep pass: a memory (and its `$meminit` and `$memwr`
cells) is only preserved iff any associated `$memrd` cell needs to be
preserved.
* xilinx: eliminate SCCs from DSP48E1 model
* xilinx: add SCC test for DSP48E1
* Update techlibs/xilinx/cells_sim.v
* xilinx: Gate DSP48E1 being a whitebox behind ALLOW_WHITEBOX_DSP48E1
Have a test that checks it works through ABC9 when enabled
Quartus assumes unsigned multiplication by default, breaking signed
multiplies, so add an input signedness parameter to the MISTRAL_MUL*
cells to propagate to Quartus' <family>_mac cells.
For connection `assign a = b;`, `sigmap(a)` returns `b`. This is
exactly the opposite of the desired canonicalization for driven bits.
Consider the following code:
module foo(inout a, b);
assign a = b;
endmodule
module bar(output c);
foo f(c, 1'b0);
endmodule
Before this commit, the inout ports would be swapped after flattening
(and cause a crash while attempting to drive a constant value).
This issue was introduced in 9f772eb9.
Fixes#2183.
Our techmap rules for $shift and $shiftx cells contained a special path
that aimed to decompose the shift LSB-first instead of MSB-first in
select cases that come up in pmux lowering. This path was needlessly
overcomplicated and contained bugs.
Instead of doing that, just switch over the main path to iterate
LSB-first (except for the specially-handled MSB for signed shifts
and overflow handling). This also makes the code consistent with
shl/shr/sshl/sshr cells, which are already decomposed LSB-first.
Fixes#2346.
Claire Xenia Wolf
Zachary Snow
Marcelina Kościelnicka
gatecat
Lofty
Eddie Hung
Xiretza
whitequark
Michael Singer
TimRudy
William D. Jones
Kamil Rakoczy
Claire Xen
David Shah
dalance
Miodrag Milanović
N. Engelhardt
Udi Finkelstein