Similar to the treatment of black boxes, splitting processes into two
scheduling nodes adds sufficient freedom so that netlists with
well-behaved processes (e.g. those emitted by nMigen) can immediately
converge.
Because processes are not emitted into edge-triggered regions, this
approach has comparable performance to -O5 (without -noproc), which
is substantially slower than -O6.
The exact shape of C++ code emitted by CXXRTL has a critical effect
on performance, both compile-time and runtime. CXXRTL's performance
greatly improved when it started localizing and inlining wires, not
only because this assists the optimizer and register allocator, but
also because inlining code into edge-triggered regions cuts the time
spent in eval() by at least a factor of two.
However, the logic of netlist layout has always been ad-hoc, fragile,
and very hard to understand and modify. After commit ece25a45, which
introduced outlining, the same logic started being applied to two
distinct netlists at once instead of one, which barely worked.
This commit does four major changes:
* There is now a single unambiguous source of truth (per subgraph)
for the layout of any emitted wire.
* Netlist layout is now done entirely during analysis using well
known graph algorithms; no graph operations happen when emitting.
* Netlist layout now happens completely separately for eval() and
debug_eval() subgraphs.
* Unreachable (within subgraph scope) netlist nodes are now neither
emitted nor considered for wire inlining decisions.
The netlist layout code should also now closely match the described
semantics.
As a part of this large cleanup, it includes many miscellaneous
improvements:
* The "bare minimum" debug level introduced in commit dd6a761d was
split into two levels; -g1 now emits debug information *only* for
inputs and state wires, and -g2 now emits debug information for
all public members. The old behavior matches -g2. This is done
to avoid bloat on low optimization levels.
* Debug aliases and inlined connections are now handled separately,
and complex RHS never interferes with inlined connections.
* Aliases to outlined wires now carry a pointer to the outline.
* Cell sync outputs can now be emitted in debug_eval().
* Black box debug information now includes comb/sync driver flags.
* The comment emitted for inlined cells is now accurate.
* Debug information statistics now has less noise.
* Netlist layout code is now much better documented.
Due to more precise inlining decisions, unmodified (i.e. with no
Yosys script being used) netlists now have much more logic inlined
into edge-triggered regions. On Minerva SoC SRAM, this improves
runtime by 20-25% across compilers and optimization levels.
Due to more precise reachability analysis, much less C++ code is now
emitted, especially at the maximum debug level. On Minerva SoC SRAM,
this improves clang compile time by 30-50% depending on options.
gcc is not affected.
On Minerva SoC SRAM compiled with clang-11, this change cuts commit
time in half (!) and overall time by 20%. When compiled with gcc-10,
there is no difference.
In C, non-static inline functions require an implementation elsewhere
(even though the body is right there in the header). It is basically
never desirable to use those as opposed to static inline ones.
Implementing outlining has greatly increased the amount of debug
information in a typical build, and consequently exposed performance
issues in C++ compilers, which are similar for both GCC and Clang;
the compile time of Minerva SoC SRAM increased almost twofold.
Although one would expect the slowdown to be caused by the increased
use of templates in `debug_eval()`, it is actually almost entirely
attributable to optimizations and codegen for `debug_items()`.
Fortunately, it is neither possible nor desirable to optimize
`debug_items()`: in most cases it is called exactly once, and its
body is a linear sequence of calls with unique arguments.
This commit turns off optimizations for `debug_items()` on GCC and
Clang, improving -Os compile time of Minerva SoC SRAM by ~40% (!)
Before this commit, if a sequence of wires assigned in a chain would
terminate on a cell, none of the wires would get marked as aliases,
and typically all of the public wires would get outlined. The reason
for this behavior is that alias analysis predates outlining and in
fact runs before it.
After this commit, alias analysis runs after outlining and considers
outlined wires valid aliasees. More importantly, if the chained wires
contain any valid aliasees, then all of the wires are aliased to
the one that is topologically deepest.
Aliased wires incur virtually no overhead for the VCD writer, unlike
outlined wires that would otherwise take their place. On Minerva SoC
SRAM, size of the full VCD dump is reduced by ~65%, and throughput
is increased by ~55%.
Aggressive wire localization and inlining is necessary for CXXRTL to
achieve high performance. However, that comes with a cost: reduced
debug information coverage. Previously, as a workaround, the `-Og`
option could have been used to guarantee complete coverage, at a cost
of a significant performance penalty.
This commit introduces debug information outlining. The main eval()
function is compiled with the user-specified optimization settings.
In tandem, an auxiliary debug_eval() function, compiled from the same
netlist, can be used to reconstruct the values of localized/inlined
signals on demand. To the extent that it is possible, debug_eval()
reuses the results of computations performed by eval(), only filling
in the missing values.
Benchmarking a representative design (Minerva SoC SRAM) shows that:
* Switching from `-O4`/`-Og` to `-O6` reduces runtime by ~40%.
* Switching from `-g1` to `-g2`, both used with `-O6`, increases
compile time by ~25%.
* Although `-g2` increases the resident size of generated modules,
this has no effect on runtime.
Because the impact of `-g2` is minimal and the benefits of having
unconditional 100% debug information coverage (and the performance
improvement as well) are major, this commit removes `-Og` and changes
the defaults to `-O6 -g2`.
We'll have our cake and eat it too!
"Elision" in this context is an unusual and not very descriptive term
whereas "inlining" is common and straightforward. Also, introducing
"inlining" makes it easier to introduce its dual under the obvious
name "outlining".
Before this commit, a cell's input was always assigned like:
p_cell.p_input = (value...);
If `p_input` is buffered (e.g. if the design is built at -O0), this
is not correct. (In practice, this breaks clocking.) Unfortunately,
the incorrect design was compiled without diagnostics because wire<>
was move-assignable and also implicitly constructible from value<>.
After this commit, cell inputs are no longer incorrectly assumed to
always be unbuffered, and wires are not assignable from values.
RTL contract violations and C++ contract violations are different:
the former depend on the netlist and will never violate memory safety
whereas the latter may. When loading a CXXRTL simulation into another
process, RTL contract violations should generally not crash it, while
C++ contract violations should.
Although it is always possible to destroy and recreate the design to
simulate a power-on reset, this has two drawbacks:
* Black boxes are also destroyed and recreated, which causes them
to reacquire their resources, which might be costly and/or erase
important state.
* Pointers into the design are invalidated and have to be acquired
again, which is costly and might be very inconvenient if they are
captured elsewhere (especially through the C API).
* backends/blif: Remove unused vector of strings
For reasons that are unclear to me, this was being used to store every
result of `cstr` before returning them. The vector was never accessed otherwise,
resulting in a huge unnecessary memory sink when emitting to BLIF.
* backends/blif: Remove CSTR macro
* backends/blif: Actually call str()
In most cases, a CXXRTL simulation would use a top module, either
because this module serves as an entry point to the CXXRTL C API,
or because the outputs of a top module are unbuffered, improving
performance. Taking this into account, the CXXRTL backend now runs
`hierarchy -auto-top` if there is no top module. For the few cases
where this behavior is unwanted, it now accepts a `-nohierarchy`
option.
Fixes#2373.
This can be useful to determine whether the wire should be a part of
a design checkpoint, whether it can be used to override design state,
and whether driving it may cause a conflict.
Before this commit, the meaning of "sync def" included some flip-flop
cells but not others. There was no actual reason for this; it was
just poorly defined.
After this commit, a "sync def" means that a wire holds design state
because it is connected directly to a flip-flop output, and may never
be unbuffered. This is not affected by presence of async inputs.
This can be useful to distinguish e.g. a combinatorially driven wire
with type `CXXRTL_VALUE` from a module input with the same type, as
well as general introspection.
The only difference between "RTLIL" and "ILANG" is that the latter is
the text representation of the former, as opposed to the in-memory
graph representation. This distinction serves no purpose but confuses
people: it is not obvious that the ILANG backend writes RTLIL graphs.
Passes `write_ilang` and `read_ilang` are provided as aliases to
`write_rtlil` and `read_rtlil` for compatibility.
This commit adds support for real-valued parameters in blackboxes. Additionally,
parameters now retain their types are no longer all encoded as strings.
There is a caveat with this implementation due to my limited knowledge of yosys,
more specifically to how yosys encodes bitwidths of parameter values. The example
below can motivate the implementation choice I took. Suppose a verilog component
is declared with the following parameters:
parameter signed [26:0] test_signed;
parameter [26:0] test_unsigned;
parameter signed [40:0] test_signed_large;
If you instantiate it as follows:
defparam <inst_name> .test_signed = 49;
defparam <inst_name> .test_unsigned = 40'd35;
defparam <inst_name> .test_signed_large = 40'd12;
If you peek in the RTLIL::Const structure corresponding to these params, you
realize that parameter "test_signed" is being considered as a 32-bit value
since it's declared as "49" without a width specifier, even though the parameter
is defined to have a maximum width of 27 bits.
A similar issue occurs for parameter "test_unsigned" where it is supposed to take
a maximum bit width of 27 bits, but if the user supplies a 40-bit value as above,
then yosys considers the value to be 40 bits.
I suppose this is due to the type being defined by the RHS rather than the definition.
Regardless of this, I emit the same widths as what the user specifies on the RHS when
generating firrtl IR.
Previous blackbox components were just emitted with their interface ports,
but their generic parameters were never emitted and it was therefore
impossible to customize them.
This commit adds support for blackbox generic parameters, though support
is only provided for INTEGER and STRING parameters. Other types of
parameters such as DOUBLEs, ..., would result in undefined behavior here.
This allows the emission of custom extmodule instances such as the following:
extmodule fourteennm_lcell_comb_<instName>:
input cin: UInt<1>
output combout: UInt<1>
output cout: UInt<1>
input dataa: UInt<1>
input datab: UInt<1>
input datac: UInt<1>
input datad: UInt<1>
input datae: UInt<1>
input dataf: UInt<1>
input datag: UInt<1>
input datah: UInt<1>
input sharein: UInt<1>
output shareout: UInt<1>
output sumout: UInt<1>
defname = fourteennm_lcell_comb
parameter extended_lut = "off"
parameter lut_mask = "b0001001000010010000100100001001000010010000100100001001000010010"
parameter shared_arith = "off"
Refer to the SMT-LIB specification, section 4.1.7. According to the spec, some options can only be specified in `start` mode. Once the solver sees `set-logic`, it moves to `assert` mode.
This commit only affects translation of RTLIL processes (for which
there is limited support).
Due to the event-driven nature of Verilog, processes like
reg x;
always @*
x <= 1;
may never execute. This can be fixed in SystemVerilog code by using
`always_comb` instead of `always @*`, but in Verilog-2001 the options
are limited. This commit implements the following workaround:
reg init = 0;
reg x;
always @* begin
if (init) begin end
x <= 1;
end
Fixes#2271.
For several reasons:
* They're more convenient than accessing .data.
* They accommodate variably-sized types like size_t transparently.
* They statically ensure that no out of range conversions happen.
For now these are only provided for unsigned integers, but eventually
they should be provided for signed integers too. (Annoyingly this
affects conversions to/from `char` at the moment.)
Fixes#2127.
This can result in massive reduction in runtime, up to 50% depending
on workload. Currently people are using `-mllvm -inline-threshold=`
as a workaround (with clang++), but this solution is more portable.
This was a correctness issue, but one of the consequences is that it
resulted in jumps in generated machine code where there should have
been none. As a side effect of fixing the bug, Minerva SoC became 10%
faster.
Without unbuffering output wires of, at least, toplevel modules, it
is not possible to have most designs that rely on IO via toplevel
ports (as opposed to using exclusively blackboxes) converge within
one delta cycle. That seriously impairs the performance of CXXRTL.
This commit avoids unbuffering outputs of all modules solely so that
in future, CXXRTL could gain fully separate compilation, and not for
any present technical reason.
With this change, it is easier to see which signals carry state (only
wire<>s appear as `reg` in VCD files) and to construct a minimal
checkpoint (CXXRTL_WIRE debug items represent the canonical smallest
set of state required to fully reconstruct the simulation).
Although logically two separate steps, these were treated as one for
historic reasons. Splitting the two makes it possible to have designs
that are only 2× slower than fastest possible (and are without extra
delta cycles) that allow probing all public wires.
Historically, elision was implemented before localization, so levels
with elision are lower than corresponding levels with localization.
This is unfortunate for two reasons:
1. Elision is a logical subset of localization, since it equals to
not giving a name to a temporary.
2. "Localize" currently actually means "unbuffer and localize",
and it would be useful to split those steps (at least for
public wires) for improved design visibility.
Although these options can be thought of as optimizations, they are
essentially orthogonal to the core of -O, which is managing signal
buffering and scope. Going from -O4 to -O2 means going from limited
to complete design visibility, yet in both cases proc and flatten
are desirable.
Before this commit, Verilog expressions like `x && 1` would result in
references to `logic_and_us` in generated CXXRTL code, which would
not compile. After this commit, since cells like that actually behave
the same regardless of signedness attributes, the signedness is
ignored, which also reduces the template instantiation pressure.
This commit changes the VCD writer such that for all signals that
have `debug_item.type == VALUE && debug_item.next == nullptr`, it
would only sample the value once.
Commit f2d7a187 added more debug information by including constant
wires, and decreased the performance of VCD writer proportionally
because the constant wires were still repeatedly sampled; this commit
eliminates the performance hit.
Constant wires can represent a significant chunk of the design in
generic designs or after optimization. Emitting them in VCD files
significantly improves usability because gtkwave removes all traces
that are not present in the VCD file after reload, and iterative
development suffers if switching a varying signal to a constant
disrupts the workflow.
This commit changes the VCD writer such that for all signals that
share `debug_item.curr`, it would only emit a single VCD identifier,
and sample the value once.
Commit 9b39c6f7 added redundancy to debug information by including
alias wires, and increased the size of VCD files proportionally; this
commit eliminates the redundancy from VCD files so that their size
is the same as before.
Alias wires can represent a significant chunk of the design in highly
hierarchical designs; in Minerva SRAM, there are 273 member wires and
527 alias wires. Showing them in every hierarchy level significantly
improves usability.
Compared to the C++ API, the C API currently has two limitations:
1. Memories cannot be updated in a race-free way.
2. Black boxes cannot be implemented in C.
Debug information describes values, wires, and memories with a simple
C-compatible layout. It can be emitted on demand into a map, which
has no runtime cost when it is unused, and allows late bound designs.
The `hdlname` attribute is used as the lookup key such that original
names, as emitted by the frontend, can be used for debugging and
introspection.
The $div and $mod cells use truncating division semantics (rounding
towards 0), as defined by e.g. Verilog. Another rounding mode, flooring
(rounding towards negative infinity), can be used in e.g. VHDL. The
new $divfloor cell provides this flooring division.
This commit also fixes the handling of $div in opt_expr, which was
previously optimized as if it was $divfloor.
The $div and $mod cells use truncating division semantics (rounding
towards 0), as defined by e.g. Verilog. Another rounding mode, flooring
(rounding towards negative infinity), can be used in e.g. VHDL. The
new $modfloor cell provides this flooring modulo (also known as "remainder"
in several languages, but this name is ambiguous).
This commit also fixes the handling of $mod in opt_expr, which was
previously optimized as if it was $modfloor.
Ensures that "BV" is the logic whenever solving an exists-forall problem with Yices, moves the "(set-logic ...)" directive above any non-info line, sets the `ef-max-iters` parameter to a very high number when using Yices in exists-forall mode so as not to prematurely abandon difficult problems, and does not provide the incompatible "--incremental" Yices argument when in exists-forall mode.
This isn't actually necessary anymore after scheduling was improved,
and `clean -purge` disrupts the mapping between wires in the input
RTLIL netlist and the output CXXRTL code.
log_assert(false) never returns and thus can't fall through, but gcc
doesn't seem to think that far. Making it the last case avoids the
problem entirely.
The current firrtl backend emits blackboxes as standard modules
with an empty body, but this causes the firrtl compiler to
optimize out entire circuits due to the absence of any drivers.
Yosys already tags blackboxes with a (*blackbox*) attribute, so this
commit just propagates this change to firrtl's syntax for blackboxes.
As per suggestion made in https://github.com/YosysHQ/yosys/pull/1987, now:
RTLIL::wire holds an is_signed field.
This is exported in JSON backend
This is exported via dump_rtlil command
This is read in via ilang_parser
Strategically inserting the pending memory write in memory::update to keep the
queue sorted allows us to skip the queue sort in memory::commit.
The Minerva SRAM SoC runs ~7% faster as a result.
This is quite possibly the worst way to implement this, but it does
work for a subset of well-behaved designs, and can be used to measure
how much performance is lost simulating the inactive edge of a clock.
It should be replaced with a clock tree analyzer generating safe
code once it is clear how should such a thing look like.
If the annotations are not used, this commit does not alter semantics
at all, other than removing elision of outputs of black box cells.
(Elision of such outputs is expected to be too rare to have any
noticeable benefit, and the implementation was somewhat of a hack.)
The (* cxxrtl.comb *) annotation alters the semantics of the output
of the black box it is applied to such that, if the black box
converges immediately, no additional delta cycle is necessary to
propagate the computed combinatorial value upwards in hierarchy.
The (* cxxrtl.sync *) annotation alters the semantics of the output
of the black box it is applied to such as to remove any uses of
the black box by the wires connected to this output, and break false
feedback arcs arising from conservative modeling of dependencies of
the black box.
Although currently these attributes are only recognized on black
boxes, if separate compilation is added in the future, it could also
emit and consume them.
The attribute for this is called (* cxxrtl.edge *), and there is
a planned attribute (* cxxrtl.sync *) that would cause blackbox
cell outputs to be added to sync defs rather than comb defs.
Rename the edge detector related stuff to avoid confusion.
Fixes#1823.
This will allow nextpnr to reuse the default value information already
present in yosys cells_sim.v and avoid duplicating (and probably
desyncing) this information.
If it is statically known that eval() will converge in one delta
cycle (that is, the second commit() will always return `false`)
because the design contains no feedback or buffered wires, then
there is no need to run the second delta cycle at all.
After this commit, the case where eval() always converges immediately
is detected and the second delta cycle is omitted. As a result,
Minerva SRAM SoC runs ~25% faster.
People judge a compiler backend by the first impression, and
the metric they judge it for is speed. -O6 does severely impact
debuggability, but it provides equally massive gains in performance,
so use it by default.
Module input wires are never set by the module, so it is unnecessary
to buffer them. Although important for all inputs, this is especially
critical for clocks, since after this commit, hierarchy levels no
longer add delta cycles. As a result, Minerva SRAM SoC runs ~73%
faster when flattened, and ~264% (!!) faster when hierarchical.
This commit changes the way edge detectors are represented in
generated code from a variable that is set in commit() and reset in
eval() to a function that considers .curr and .next of the clock
wire. Behavior remains the same. Besides being simpler to generate
and providing more opportunities for optimization, this commit paves
way for unbuffering module inputs.
Before this commit, any wire that was not driven by an output port of
exactly one comb cell would not be localized, even if there were no
feedback arcs through that wire. This would cause the wire to become
buffered and require (often quite a few) extraneous delta cycles
during evaluation. To alleviate this problem, -O5 was running
`splitnets -driver`.
However, this solution was mistaken. Because `splitnets -driver`
followed by `opt_clean -purge` would produce more nets with multiple
drivers, it would have to be iterated to fixpoint. Moreover, even if
this was done, it would not be sufficient because `opt_clean -purge`
does not currently remove wires with the `\init` attribute (and it
is not desirable to remove such wires, since they correspond to
registers and may be useful for debugging).
The proper solution is to consider the condition in which a wire
may be localized. Specifically, if there are no feedback arcs through
this wire, and no part of the wire is driven by an output of a sync
cell, then the wire holds no state and is localizable.
After this commit, the original condition for not localizing a wire
is replaced by a check for any sync cell driving it. This makes it
unnecessary to run `splitnets -driver` in the majority of cases
to get a design with no buffered wires, and -O5 no longer includes
that pass. As a result, Minerva SRAM SoC no longer has any buffered
wires, and runs ~27% faster.
In addition, this commit prepares the flow graph for introduction
of sync outputs of black boxes.
Co-authored-by: Jean-François Nguyen <jf@lambdaconcept.com>
Any buffered combinatorial wires (including, as a subset, feedback
wires) will prevent the design from always converging in one delta
cycle. Before this commit, only feedback wires were detected. After
this commit, any buffered combinatorial wires, including feedback
wires, are detected.
Co-authored-by: Jean-François Nguyen <jf@lambdaconcept.com>
Both parameters and attributes are necessary because the parameters
have to be the same between every instantiation of the cell, but
attributes may well vary. For example, for an UART PHY, the type
of the PHY (tty, pty, socket) would be a parameter, but configuration
of the implementation specified by the type (socket address) would
be an attribute.
This commit adds support for replacing RTLIL modules with CXXRTL
black boxes. Black box port widths may not depend on the parameters
with which it is instantiated (yet); the parameters may only be used
to change the behavior of the black box.
Pepijn de Vos
whitequark
Miodrag Milanovic
Sahand Kashani
William Woodruff
Marcelina Kościelnicka
Jakob Wenzel
N. Engelhardt
Xiretza
Noah Moroze
Andy Knowles
Alberto Gonzalez
Claire Wolf
Jean-François Nguyen
MerryMage
Mike Walters
Yehowshua Immanuel
Eddie Hung
Vamsi K Vytla
David Shah
Asu
Claire Wolf