- Add support for assignments within expressions, e.g., `x[y++] = z;` or
`x = (y *= 2) - 1;`. The logic is handled entirely within the parser
by injecting statements into the current procedural block.
- Add support for pre-increment/decrement statements, which are
behaviorally equivalent to post-increment/decrement statements.
- Fix non-standard attribute position used for post-increment/decrement
statements.
(* nowrshmsk *) on a struct / union variable now affects dynamic
bit slice assignments to members of the struct / union.
(* nowrshmsk *) can in some cases yield significant resource savings; the
combination of pipeline shifting and indexed writes is an example of this.
Constructs similar to the one below can benefit from (* nowrshmsk *), and
in addition it is no longer necessary to split out the shift assignments
on separate lines in order to avoid the error message "ERROR: incompatible
mix of lookahead and non-lookahead IDs in LHS expression."
always_ff @(posedge clk) begin
if (rotate) begin
{ v5, v4, v3, v2, v1, v0 } <= { v4, v3, v2, v1, v0, v5 };
if (res) begin
v0.bytes <= '0;
end else if (w) begin
v0.bytes[addr] <= data;
end
end
end
The difference between void functions and tasks is that always_comb's
implicit sensitivity list behaves as if functions were inlined, but
ignores signals read only in tasks. This only matters for event based
simulation, and for synthesis we can treat a void function like a task.
Yosys works with bison 3.0 (or newer), but not bison 2.7 (the previous
release). Ideally, we would require "3" rather than "3.0" to give a
better error message, but bison 2.3, which still ships with macOS, does
not support major-only version requirements. With this change, building
with an outdated bison yields: `frontends/rtlil/rtlil_parser.y:25.10-14:
require bison 3.0, but have 2.3`.
This enables the usage of declarations of wand or wor with a base type
of logic, integer, or a typename. Note that declarations of nets with
2-state base types is still permitted, in violation of the spec.
- Root AST_PREFIX nodes are now subject to genblk expansion to allow
them to refer to a locally-visible generate block
- Part selects on AST_PREFIX member leafs can now refer to generate
block items (previously would not resolve and raise an error)
- Add source location information to AST_PREFIX nodes
This is accomplished by generating a unique name for the genvar,
renaming references to the genvar only in the loop's initialization,
guard, and incrementation, and finally adding a localparam inside the
loop body with the original name so that the genvar can be shadowed as
expected.
- User-defined types must be data types. Using a net type (e.g. wire) is
a syntax error.
- User-defined types without a net type are always variables (i.e.
logic).
- Nets and variables can now be explicitly declared using user-defined
types:
typedef logic [1:0] W;
wire W w;
typedef logic [1:0] V;
var V v;
Fixes#2846
This doesn't do anything useful yet: the patch just adds support for
the syntax to the lexer and parser and adds some tests to check the
syntax parses properly. This generates AST nodes, but doesn't yet
generate RTLIL.
Since our existing hierarchical_identifier parser doesn't allow bit
selects (so you can't do something like foo[1].bar[2].baz), I've also
not added support for a trailing bit select (the "constant_bit_select"
non-terminal in "bind_target_instance" in the spec). If we turn out to
need this in future, we'll want to augment hierarchical_identifier and
its other users too.
Note that you can't easily use the BNF from the spec:
bind_directive ::=
"bind" bind_target_scope [ : bind_target_instance_list]
bind_instantiation ;
| "bind" bind_target_instance bind_instantiation ;
even if you fix the lookahead problem, because code like this matches
both branches in the BNF:
bind a b b_i (.*);
The problem is that 'a' could either be a module name or a degenerate
hierarchical reference. This seems to be a genuine syntactic
ambiguity, which the spec resolves (p739) by saying that we have to
wait until resolution time (the hierarchy pass) and take whatever is
defined, treating 'a' as an instance name if it names both an instance
and a module.
To keep the parser simple, it currently accepts this invalid syntax:
bind a.b : c d e (.*);
This is invalid because we're in the first branch of the BNF above, so
the "a.b" term should match bind_target_scope: a module or interface
identifier, not an arbitrary hierarchical identifier.
This will fail in the hierarchy pass (when it's implemented in a
future patch).
- disallow [gen]blocks with an end label but not begin label
- check validity of module end label
- fix memory leak of package name and end label
- fix memory leak of module end label
- Modules with a parameter without a default value will be automatically
deferred until the hierarchy pass
- Allows for parameters without defaults as module items, rather than
just int the `parameter_port_list`, despite being forbidden in the LRM
- Check for parameters without defaults that haven't been overriden
- Add location info to parameter/localparam declarations
Declaring the ports as standard module items already worked as expected.
This adds a missing usage of `checkRange()` so that headers such as
`module m(output integer x);` now work correctly.
- Standard data declarations can now use any integer type
- Parameters and localparams can now use any integer type
- Function returns types can now use any integer type
- Fix `parameter logic`, `localparam reg`, etc. to be 1 bit (previously 32 bits)
- Added longint type (64 bits)
- Unified parser source for integer type widths
This is a somewhat obscure edge case I encountered while working on test
cases for earlier changes. Declarations in generate blocks should not be
checked against the list of ports. This change also adds a check
forbidding declarations within generate blocks being tagged as inputs or
outputs.
This change set contains a number of bug fixes and improvements related to
scoping and resolution in generate and procedural blocks. While many of the
frontend changes are interdependent, it may be possible bring the techmap
changes in under a separate PR.
Declarations within unnamed generate blocks previously encountered issues
because the data declarations were left un-prefixed, breaking proper scoping.
The LRM outlines behavior for generating names for unnamed generate blocks. The
original goal was to add this implicit labelling, but doing so exposed a number
of issues downstream. Additional testing highlighted other closely related scope
resolution issues, which have been fixed. This change also adds support for
block item declarations within unnamed blocks in SystemVerilog mode.
1. Unlabled generate blocks are now implicitly named according to the LRM in
`label_genblks`, which is invoked at the beginning of module elaboration
2. The Verilog parser no longer wraps explicitly named generate blocks in a
synthetic unnamed generate block to avoid creating extra hierarchy levels
where they should not exist
3. The techmap phase now allows special control identifiers to be used outside
of the topmost scope, which is necessary because such wires and cells often
appear in unlabeled generate blocks, which now prefix the declarations within
4. Some techlibs required modifications because they relied on the previous
invalid scope resolution behavior
5. `expand_genblock` has been simplified, now only expanding the outermost
scope, completely deferring the inspection and elaboration of nested scopes;
names are now resolved by looking in the innermost scope and stepping outward
6. Loop variables now always become localparams during unrolling, allowing them
to be resolved and shadowed like any other identifier
7. Identifiers in synthetic function call scopes are now prefixed and resolved
in largely the same manner as other blocks
before: `$func$\func_01$tests/simple/scopes.blk.v:60$5$\blk\x`
after: `\func_01$func$tests/simple/scopes.v:60$5.blk.x`
8. Support identifiers referencing a local generate scope nested more
than 1 level deep, i.e. `B.C.x` while within generate scope `A`, or using a
prefix of a current or parent scope, i.e. `B.C.D.x` while in `A.B`, `A.B.C`,
or `A.B.C.D`
9. Variables can now be declared within unnamed blocks in SystemVerilog mode
Addresses the following issues: 656, 2423, 2493
Zachary Snow
whitequark
Dag Lem
Jannis Harder
Claire Xen
Brett Witherspoon
Michael Singer
Rupert Swarbrick
Xiretza
Marcelina Kościelnicka
TimRudy
Kamil Rakoczy
Lukasz Dalek
Claire Xenia Wolf