This commit achieves three roughly equally important goals:
1. To bring the rendering code in kernel/fmt.cc and in cxxrtl.h as close
together as possible, with an ideal of only having the bigint library
as the difference between the render functions.
2. To make the treatment of `$time` and `$realtime` in CXXRTL closer to
the Verilog semantics, at least in the formatting code.
3. To change the code generator so that all of the `$print`-to-`string`
conversion code is contained inside of a closure.
There are two reasons to aim for goal (3):
a. Because output redirection through definition of a global ostream
object is neither convenient nor useful for environments where
the output is consumed by other code rather than being printed on
a terminal.
b. Because it may be desirable to, in some cases, ignore the `$print`
cells that are present in the netlist based on a runtime decision.
This is doubly true for an upcoming `$check` cell implementing
assertions, since failing a `$check` would by default cause a crash.
This makes tests/verilog/dynamic_range_lhs.v pass, after ensuring that
nowrshmsk is actually tested.
Stride is extracted from indexing of two-dimensional packed arrays and
variable slices on the form dst[i*stride +: width] = src, and is used
to optimize the generated CASE block.
Also uses less confusing variable names for indexing of lhs wires.
The previous version could easily generate a large amount of padding
when the constant factor was significantly larger than the width of the
shift data input. This could lead to huge amounts of logic being
generated before then being optimized away at a huge performance and
memory cost.
Additionally and more critically, when the input width was not a
multiple of the constant factor, the input data was padded with 'x bits
to such a multiple before interspersing the 'x padding needed to align
the selectable windows to power-of-two offsets.
Such a final padding would not be correct for shifts besides $shiftx,
and the previous version did attempt to remove that final padding at the
end so that the native zero/sign/x-extension behavior of the shift cell
would be used, but since the last selectable window also got
power-of-two padding appended after the padding the code is trying to
remove got added, it did not actually fully remove it in some cases.
I changed the code to only add 'x padding between selectable windows,
leaving the last selectable window unpadded. This omits the need to add
final padding to a multiple of the constant factor in the first place.
In turn, that means the only 'x bits added are actually impossible to
select. As a side effect no padding is added when the constant factor is
equal to or larger than the width of the shift data input, also solving
the reported performance bug.
This fixes#4056
Renamed python script so that it sits next to the testbench file when alphabetically sorted.
Reverted `MAX_WIDTH` to full precision for truncation testing.
Expected values are now stored in full precision rather than truncating to the same value as the input.
i.e. 0x5a5a5a5a will truncate to 0x5a5a for write data but will remain 0x5a5a5a5a for expected read.
Adds TDP submodule to generator.
Adds shorthand expected signal to testbench (mostly to make it easier when I look at the vcd dump to figure out what I did wrong in tests).
Adds `double_sync_ram_sdp` to `common/blockram.v`, providing a test for two disjoint memories.
Refactor python blockram template to take a list of params to support the above.
Also change the smaller single TDP36K tests to also test `port_a_width` value.
Use python script to generate tests for both SDP and TDP across multiple sizes of RAM.
Adds sync_ram_sdp_(wwr|wrr) to common blockram.v for double width write and double width read respectively.
In preparation for substantial expansion of CXXRTL's runtime, this commit
reorganizes the files used by the implementation. Only minimal changes are
required in a consumer.
First, change:
-I$(yosys-config --datdir)/include
to:
-I$(yosys-config --datdir)/include/backends/cxxrtl/runtime
Second, change:
#include <backends/cxxrtl/cxxrtl.h>
to:
#include <cxxrtl/cxxrtl.h>
(and do the same for cxxrtl_vcd.h, etc.)
This expands the part-select tests with one additional module.
It specifically tests the different variants of the `peepopt`
optimizations `shiftadd` and `shiftmul`.
Not all these cases are actually transformed using `shiftadd`,
including them also checks if the correct variants are rejected.
- Add support for assignments within expressions, e.g., `x[y++] = z;` or
`x = (y *= 2) - 1;`. The logic is handled entirely within the parser
by injecting statements into the current procedural block.
- Add support for pre-increment/decrement statements, which are
behaviorally equivalent to post-increment/decrement statements.
- Fix non-standard attribute position used for post-increment/decrement
statements.
We add a new flow graph node type, PRINT_SYNC, as they don't get handled
with regular CELL_EVALs. We could probably move this grouping out of
the dump method.
Removing some signed checks and logic where we've already guaranteed the
values to be positive. Indeed, in these cases, if a negative value got
through (per my realisation in the signed fuzz harness), it would cause
an infinite loop due to flooring division.
We need to invoke "read_verilog" manually, since the default action on
input files is to defer processing. Under such conditions, we never
simplify the AST, and initial $prints never execute.
If the `$ge` cell we are replacing has wide output port, the upper bits
on the port should be driven to zero. That's not what a `$not` cell with
a single-bit input does. Instead opt for a `$logic_not` cell, which does
zero-pad its output.
Fixes#3867.
Extend the aigmap.ys test with SAT-based comparison of the original
cells and their AIG implementations.
This tests both the usual cells and the single-bit Yosys gates.
Distinguish between the A, B input ports of `$_ANDNOT_`, `$_ORNOT_`
gates when considering those for sharing. Unlike the input ports of the
other supported single-bit gates, those are not interchangeable.
Fixes#3848.
genvar declaration cannot take an initial value when declared as a module_or_generate_item_declaration.
Correct this test so that it doesn't fail unexpectedly if Yosys aligns with the standard.
(* nowrshmsk *) on a struct / union variable now affects dynamic
bit slice assignments to members of the struct / union.
(* nowrshmsk *) can in some cases yield significant resource savings; the
combination of pipeline shifting and indexed writes is an example of this.
Constructs similar to the one below can benefit from (* nowrshmsk *), and
in addition it is no longer necessary to split out the shift assignments
on separate lines in order to avoid the error message "ERROR: incompatible
mix of lookahead and non-lookahead IDs in LHS expression."
always_ff @(posedge clk) begin
if (rotate) begin
{ v5, v4, v3, v2, v1, v0 } <= { v4, v3, v2, v1, v0, v5 };
if (res) begin
v0.bytes <= '0;
end else if (w) begin
v0.bytes[addr] <= data;
end
end
end
When the verilog frontend perfomed constant evaluation of unbased
unsized constants in a context-determined expression it did not properly
extend them by repeating the bit value. This only affected constant
evaluation and not constants that made it through unchanged to RTLIL.
The latter case was already covered by tests and working before.
This fixes the const-eval issue by checking the `is_unsized` flag in
bitsAsConst and extending the value accordingly.
The newly added test also tests the already working non-const-eval case
to highlight that both cases should behave the same.
The difference between void functions and tasks is that always_comb's
implicit sensitivity list behaves as if functions were inlined, but
ignores signals read only in tasks. This only matters for event based
simulation, and for synthesis we can treat a void function like a task.
This uses the same constant parsing for enum_values and for attributes
and extends it to handle signed values as those are used for enums that
implicitly use the int type.
Use `$finish(0)` to silently exit even when using recent iverlog
versions. Run `write_verilog -noexpr` before `write_verilog` as the
latter can modify the design.
This also enables checking the tests results, as xprop should be in a
state where the existing tests pass.
This brings the metadata for packed arrays in packed structs
in line with the metadata for unpacked arrays, and correctly
handles the case when both lsb and msb in an address range are
non-zero.
This is primarily intended to enable the standard-permitted use of
module-scoped identifiers to refer to tasks and non-constant functions.
As a side-effect, this also adds support for the non-standard use of
module-scoped identifiers referring to constant functions, a feature
that is supported in some other tools, including Iverilog.
The witness metadata was missing fine grained FFs completely and for
coarse grained FFs where the output connection has multiple chunks it
lacked the offset of the chunk within the SMT expression. This fixes
both, the later by adding an "smtoffset" field to the metadata.
This adds a native json based witness trace format. By having a common
format that includes everything we support, and providing a conversion
utility (yosys-witness) we no longer need to implement every format for
every tool that deals with witness traces, avoiding a quadratic
opportunity to introduce subtle bugs.
Included:
* smt2: New yosys-smt2-witness info lines containing full hierarchical
paths without lossy escaping.
* yosys-smtbmc --dump-yw trace.yw: Dump results in the new format.
* yosys-smtbmc --yw trace.yw: Read new format as constraints.
* yosys-witness: New tool to convert witness formats.
Currently this can only display traces in a human-readable-only
format and do a passthrough read/write of the new format.
* ywio.py: Small python lib for reading and writing the new format.
Used by yosys-smtbmc and yosys-witness to avoid duplication.
genrtlil.cc and simplify.cc had inconsistent and slightly broken
handling of signedness for array querying functions. These functions are
defined to return a signed result. Simplify always produced an unsigned
and genrtlil always a signed 32-bit result ignoring the context.
Includes tests for the the relvant edge cases for context dependent
conversions.
N. Engelhardt
Miodrag Milanovic
Catherine
Dag Lem
Martin Povišer
Merry
Jannis Harder
Krystine Sherwin
Lofty
phsauter
Zachary Snow
andyfox-rushc
Asherah Connor
Charlotte
Charlotte
Eddie Hung
CORRADI Quentin
Muthiah Annamalai (முத்து அண்ணாமலை)
Muthu Annamalai
Muthu Annamalai
Ralf Fuest
Benjamin Barzen
gatecat
KrystalDelusion
Lloyd Parkes
Claire Xenia Wolf
Archie
George Rennie
Jacob Lifshay
Marcelina Kościelnicka