riscv
/
yosys
mirror of https://github.com/YosysHQ/yosys.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

xilinx_dffopt: Don't crash on missing IS_*_INVERTED. 

The presence of IS_*_INVERTED on FD* cells follows Vivado, which
apparently has been decided by a dice roll.  Just assume false if the
parameter doesn't exist.

Fixes #2559.
This commit is contained in:
Marcelina Kościelnicka 2021-01-25 13:01:18 +01:00
parent cd6f0732f3
commit ea79e16bab
3 changed files with 51 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
techlibs/xilinx/xilinx_dffopt.cc
View File

@ -209,7 +209,7 @@ lut_sigin_done:
continue;
LutData lut_d = it_D->second.first;
Cell *cell_d = it_D->second.second;
if (cell->getParam(ID(IS_D_INVERTED)).as_bool()) {
if (cell->hasParam(ID(IS_D_INVERTED)) && cell->getParam(ID(IS_D_INVERTED)).as_bool()) {
// Flip all bits in the LUT.
for (int i = 0; i < GetSize(lut_d.first); i++)
lut_d.first.bits[i] = (lut_d.first.bits[i] == State::S1) ? State::S0 : State::S1;
@ -249,7 +249,7 @@ lut_sigin_done:
if (has_s) {
SigBit sig_S = sigmap(cell->getPort(ID::S));
LutData lut_s = LutData(Const(2, 2), {sig_S});
bool inv_s = cell->getParam(ID(IS_S_INVERTED)).as_bool();
bool inv_s = cell->hasParam(ID(IS_S_INVERTED)) && cell->getParam(ID(IS_S_INVERTED)).as_bool();
auto it_S = bit_to_lut.find(sig_S);
if (it_S != bit_to_lut.end())
lut_s = it_S->second.first;
@ -271,7 +271,7 @@ lut_sigin_done:
if (has_r) {
SigBit sig_R = sigmap(cell->getPort(ID::R));
LutData lut_r = LutData(Const(2, 2), {sig_R});
bool inv_r = cell->getParam(ID(IS_R_INVERTED)).as_bool();
bool inv_r = cell->hasParam(ID(IS_R_INVERTED)) && cell->getParam(ID(IS_R_INVERTED)).as_bool();
auto it_R = bit_to_lut.find(sig_R);
if (it_R != bit_to_lut.end())
lut_r = it_R->second.first;

3
tests/arch/xilinx/mux.ys
View File

@ -40,10 +40,11 @@ proc
equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -noiopad # equivalency check
design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
cd mux16 # Constrain all select calls below inside the top module
select -assert-max 2 t:LUT3
select -assert-max 2 t:LUT4
select -assert-min 4 t:LUT6
select -assert-max 7 t:LUT6
select -assert-max 2 t:MUXF7
dump
select -assert-none t:LUT6 t:LUT4 t:MUXF7 %% t:* %D
select -assert-none t:LUT6 t:LUT4 t:LUT3 t:MUXF7 %% t:* %D

46
tests/arch/xilinx/xilinx_dffopt.ys
View File

@ -223,3 +223,49 @@ select -assert-count 1 t:LUT2
select -assert-none t:FDRSE t:LUT4 t:LUT2 %% t:* %D
design -reset
read_verilog << EOT
// FDSE_1, mergeable CE and S, but CE only not worth it.
module t0 (...);
input wire clk;
input wire [7:0] i;
output wire [7:0] o;
wire [7:0] tmp ;
LUT2 #(.INIT(4'h6)) lut0 (.I0(i[0]), .I1(i[1]), .O(tmp[0]));
LUT2 #(.INIT(4'h6)) lut1 (.I0(i[1]), .I1(i[2]), .O(tmp[1]));
FDSE_1 ff (.D(tmp[0]), .CE(i[7]), .S(tmp[1]), .Q(o[0]));
endmodule
EOT
read_verilog -lib +/xilinx/cells_sim.v
design -save t0
equiv_opt -blacklist xilinx_dffopt_blacklist.txt -assert -map +/xilinx/cells_sim.v xilinx_dffopt
design -load postopt
clean
cd t0
select -assert-count 1 t:FDSE_1
select -assert-count 1 t:LUT5
select -assert-none t:FDSE_1 t:LUT5 %% t:* %D
design -load t0
equiv_opt -blacklist xilinx_dffopt_blacklist.txt -assert -map +/xilinx/cells_sim.v xilinx_dffopt -lut4
design -load postopt
clean
cd t0
select -assert-count 1 t:FDSE_1
select -assert-count 2 t:LUT2
select -assert-none t:FDSE_1 t:LUT2 %% t:* %D
design -reset