diff --git a/techlibs/xilinx/cells_sim.v b/techlibs/xilinx/cells_sim.v
index d87cfe91b..f5850d8a2 100644
--- a/techlibs/xilinx/cells_sim.v
+++ b/techlibs/xilinx/cells_sim.v
@@ -3387,10 +3387,10 @@ module DSP48E1 (
     reg signed [24:0] Dr;
     reg signed [17:0] Br1, Br2;
     reg signed [47:0] Cr;
-    reg        [4:0]  INMODEr = 5'b0;
-    reg        [6:0]  OPMODEr = 7'b0;
-    reg        [3:0]  ALUMODEr = 4'b0;
-    reg        [2:0]  CARRYINSELr = 3'b0;
+    reg        [4:0]  INMODEr;
+    reg        [6:0]  OPMODEr;
+    reg        [3:0]  ALUMODEr;
+    reg        [2:0]  CARRYINSELr;
 
     generate
         // Configurable A register
@@ -3572,11 +3572,13 @@ module DSP48E1 (
 
     // Carry in
     wire A24_xnor_B17d = A_MULT[24] ~^ B_MULT[17];
-    reg CARRYINr = 1'b0, A24_xnor_B17 = 1'b0;
+    reg CARRYINr, A24_xnor_B17;
     generate
+        if (CARRYINREG == 1) initial CARRYINr = 1'b0;
         if (CARRYINREG == 1) begin always @(posedge CLK) if (RSTALLCARRYIN) CARRYINr <= 1'b0; else if (CECARRYIN) CARRYINr <= CARRYIN; end
         else                 always @* CARRYINr = CARRYIN;
 
+        if (MREG == 1) initial A24_xnor_B17 = 1'b0;
         if (MREG == 1) begin always @(posedge CLK) if (RSTALLCARRYIN) A24_xnor_B17 <= 1'b0; else if (CEM) A24_xnor_B17 <= A24_xnor_B17d; end
         else                 always @* A24_xnor_B17 = A24_xnor_B17d;
     endgenerate
diff --git a/tests/arch/xilinx/macc.v b/tests/arch/xilinx/macc.v
index e36b2bab1..1645537fd 100644
--- a/tests/arch/xilinx/macc.v
+++ b/tests/arch/xilinx/macc.v
@@ -10,10 +10,10 @@ module macc # (parameter SIZEIN = 16, SIZEOUT = 40) (
 	output signed [SIZEOUT-1:0] accum_out
 );
 // Declare registers for intermediate values
-reg signed [SIZEIN-1:0] a_reg, b_reg;
-reg sload_reg;
-reg signed [2*SIZEIN-1:0] mult_reg;
-reg signed [SIZEOUT-1:0] adder_out, old_result;
+reg signed [SIZEIN-1:0] a_reg = 0, b_reg = 0;
+reg sload_reg = 0;
+reg signed [2*SIZEIN-1:0] mult_reg = 0;
+reg signed [SIZEOUT-1:0] adder_out = 0, old_result;
 always @* /*(adder_out or sload_reg)*/ begin // Modification necessary to fix sim/synth mismatch
 	if (sload_reg)
 		old_result <= 0;
@@ -50,10 +50,10 @@ module macc2 # (parameter SIZEIN = 16, SIZEOUT = 40) (
 	output overflow
 );
 // Declare registers for intermediate values
-reg signed [SIZEIN-1:0] a_reg, b_reg, a_reg2, b_reg2;
+reg signed [SIZEIN-1:0] a_reg = 0, b_reg = 0, a_reg2 = 0, b_reg2 = 0;
 reg signed [2*SIZEIN-1:0] mult_reg = 0;
 reg signed [SIZEOUT:0] adder_out = 0;
-reg overflow_reg;
+reg overflow_reg = 0;
 always @(posedge clk) begin
 	//if (ce)
 	begin
diff --git a/tests/arch/xilinx/macc.ys b/tests/arch/xilinx/macc.ys
index bf2b36320..61a570f48 100644
--- a/tests/arch/xilinx/macc.ys
+++ b/tests/arch/xilinx/macc.ys
@@ -6,7 +6,7 @@ proc
 #equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -noiopad ### TODO
 equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx -noiopad
 miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -seq 10 -show-inputs -show-outputs miter
+sat -verify -prove-asserts -seq 3 -show-inputs -show-outputs miter
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd macc # Constrain all select calls below inside the top module
 select -assert-count 1 t:BUFG
@@ -20,7 +20,7 @@ proc
 #equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -noiopad ### TODO
 equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx -noiopad
 miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -seq 10 -show-inputs -show-outputs miter
+sat -verify -prove-asserts -seq 4 -show-inputs -show-outputs miter
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd macc2 # Constrain all select calls below inside the top module