Merge remote-tracking branch 'origin/eddie/shregmap_improve' into xc7mux

passes/techmap/shregmap.cc

@@ -293,10 +293,13 @@ struct ShregmapWorker
 
 				if (opts.init || sigbit_init.count(q_bit) == 0)
 				{
-					if (sigbit_chain_next.count(d_bit)) {
+					auto r = sigbit_chain_next.insert(std::make_pair(d_bit, cell));
+					if (!r.second) {
 						sigbit_with_non_chain_users.insert(d_bit);
-					} else
-						sigbit_chain_next[d_bit] = cell;
+						Wire *wire = module->addWire(NEW_ID);
+						module->connect(wire, d_bit);
+						sigbit_chain_next.insert(std::make_pair(wire, cell));
+					}
 
 					sigbit_chain_prev[q_bit] = cell;
 					continue;

tests/various/shregmap.v

@@ -0,0 +1,22 @@
+module shregmap_test(input i, clk, output [1:0] q);
+reg head = 1'b0;
+reg [3:0] shift1 = 4'b0000;
+reg [3:0] shift2 = 4'b0000;
+
+always @(posedge clk) begin
+    head <= i;
+    shift1 <= {shift1[2:0], head};
+    shift2 <= {shift2[2:0], head};
+end
+
+assign q = {shift2[3], shift1[3]};
+endmodule
+
+module $__SHREG_DFF_P_(input C, D, output Q);
+parameter DEPTH = 1;
+parameter [DEPTH-1:0] INIT = {DEPTH{1'b0}};
+reg [DEPTH-1:0] r = INIT;
+always @(posedge C) 
+    r <= { r[DEPTH-2:0], D };
+assign Q = r[DEPTH-1];
+endmodule

tests/various/shregmap.ys

@@ -0,0 +1,31 @@
+read_verilog shregmap.v
+design -copy-to model $__SHREG_DFF_P_
+hierarchy -top shregmap_test
+prep
+design -save gold
+
+techmap
+shregmap -init
+
+opt
+
+stat
+# show -width
+select -assert-count 1 t:$_DFF_P_
+select -assert-count 2 t:$__SHREG_DFF_P_
+
+design -stash gate
+
+design -import gold -as gold
+design -import gate -as gate
+design -copy-from model -as $__SHREG_DFF_P_ \$__SHREG_DFF_P_
+prep
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -show-ports -seq 5 miter
+
+design -load gold
+stat
+
+design -load gate
+stat