Cleanups in xilinx examples

techlibs/xilinx/example_mojo_counter/example.sh

@@ -2,70 +2,17 @@
 
 set -ex
 
-XILINX_DIR=/opt/Xilinx/14.5/ISE_DS/ISE/
+XILINX_DIR=/opt/Xilinx/14.5/ISE_DS/ISE
 XILINX_PART=xc6slx9-2-tqg144
 
-../../../yosys - << EOT
+../../../yosys - <<- EOT
-# read design
+	read_verilog example.v
-read_verilog example.v
+	synth_xilinx -edif synth.edif
-
-# high-level synthesis
-hierarchy -check -top top
-proc; opt; fsm; opt; techmap; opt
-
-# mapping logic to LUTs using Berkeley ABC
-abc -lut 6; opt
-
-# map internal cells to FPGA cells
-techmap -map ../cells.v; opt
-
-# insert clock buffers
-select -set clocks */t:FDRE %x:+FDRE[C] */t:FDRE %d
-iopadmap -inpad BUFGP O:I @clocks
-
-# insert i/o buffers
-iopadmap -outpad OBUF I:O -inpad IBUF O:I @clocks %n
-
-# write netlist
-write_edif synth.edif
-EOT
-
-cat > bitgen.ut <<- EOT
-	-w
-	-g DebugBitstream:No
-	-g Binary:no
-	-g CRC:Enable
-	-g Reset_on_err:No
-	-g ConfigRate:2
-	-g ProgPin:PullUp
-	-g TckPin:PullUp
-	-g TdiPin:PullUp
-	-g TdoPin:PullUp
-	-g TmsPin:PullUp
-	-g UnusedPin:PullDown
-	-g UserID:0xFFFFFFFF
-	-g ExtMasterCclk_en:No
-	-g SPI_buswidth:1
-	-g TIMER_CFG:0xFFFF
-	-g multipin_wakeup:No
-	-g StartUpClk:CClk
-	-g DONE_cycle:4
-	-g GTS_cycle:5
-	-g GWE_cycle:6
-	-g LCK_cycle:NoWait
-	-g Security:None
-	-g DonePipe:No
-	-g DriveDone:No
-	-g en_sw_gsr:No
-	-g drive_awake:No
-	-g sw_clk:Startupclk
-	-g sw_gwe_cycle:5
-	-g sw_gts_cycle:4
 EOT
 
 $XILINX_DIR/bin/lin64/edif2ngd -a synth.edif synth.ngo
 $XILINX_DIR/bin/lin64/ngdbuild -p $XILINX_PART -uc example.ucf synth.ngo synth.ngd
 $XILINX_DIR/bin/lin64/map -p $XILINX_PART -w -o mapped.ncd synth.ngd constraints.pcf
 $XILINX_DIR/bin/lin64/par -w mapped.ncd placed.ncd constraints.pcf
-$XILINX_DIR/bin/lin64/bitgen -f bitgen.ut placed.ncd example.bit constraints.pcf
+$XILINX_DIR/bin/lin64/bitgen -w placed.ncd example.bit constraints.pcf
 

techlibs/xilinx/example_sim_counter/run_sim.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+set -ex
+
+XILINX_DIR=/opt/Xilinx/14.5/ISE_DS/ISE
+
+../../../yosys -p 'synth_xilinx -top counter; write_verilog -noattr testbench_synth.v' counter.v
+
+iverilog -o testbench_gold counter_tb.v counter.v
+iverilog -o testbench_gate counter_tb.v testbench_synth.v \
+	$XILINX_DIR/verilog/src/{glbl,unisims/{FDRE,LUT1,LUT2,LUT3,LUT4,LUT5,LUT6}}.v
+
+./testbench_gold > testbench_gold.txt
+./testbench_gate > testbench_gate.txt
+
+if diff -u testbench_gold.txt testbench_gate.txt; then
+	set +x; echo; echo; banner "  PASS  "
+else
+	exit 1
+fi
+
+rm -f testbench_{synth,gold,gate,mapped}*
+

techlibs/xilinx/example_sim_counter/run_testbench.sh

@@ -1,86 +0,0 @@
-#!/bin/bash
-
-set -ex
-
-XILINX_DIR=/opt/Xilinx/14.2/ISE_DS/ISE/
-
-../../yosys - <<- EOT
-	# read design
-	read_verilog counter.v
-
-	# high-level synthesis
-	hierarchy -check -top counter
-	proc; opt; fsm; opt; techmap; opt
-
-	# mapping logic to LUTs using Berkeley ABC
-	abc -lut 6; opt
-
-	# map internal cells to FPGA cells
-	techmap -map cells.v; opt
-
-	# write netlist
-	write_verilog -noattr testbench_synth.v
-	write_edif testbench_synth.edif
-EOT
-
-iverilog -o testbench_gold counter_tb.v counter.v
-iverilog -o testbench_gate counter_tb.v testbench_synth.v \
-	$XILINX_DIR/verilog/src/{glbl,unisims/{FDRE,LUT1,LUT2,LUT3,LUT4,LUT5,LUT6}}.v
-
-./testbench_gold > testbench_gold.txt
-./testbench_gate > testbench_gate.txt
-
-if diff -u testbench_gold.txt testbench_gate.txt; then
-	set +x; echo; echo; banner "  PASS  "
-else
-	exit 1
-fi
-
-if [ "$*" = "-map" ]; then
-	set -x
-
-	cat > testbench_synth.ut <<- EOT
-		-w
-		-g DebugBitstream:No
-		-g Binary:no
-		-g CRC:Enable
-		-g Reset_on_err:No
-		-g ConfigRate:2
-		-g ProgPin:PullUp
-		-g TckPin:PullUp
-		-g TdiPin:PullUp
-		-g TdoPin:PullUp
-		-g TmsPin:PullUp
-		-g UnusedPin:PullDown
-		-g UserID:0xFFFFFFFF
-		-g ExtMasterCclk_en:No
-		-g SPI_buswidth:1
-		-g TIMER_CFG:0xFFFF
-		-g multipin_wakeup:No
-		-g StartUpClk:CClk
-		-g DONE_cycle:4
-		-g GTS_cycle:5
-		-g GWE_cycle:6
-		-g LCK_cycle:NoWait
-		-g Security:None
-		-g DonePipe:No
-		-g DriveDone:No
-		-g en_sw_gsr:No
-		-g drive_awake:No
-		-g sw_clk:Startupclk
-		-g sw_gwe_cycle:5
-		-g sw_gts_cycle:4
-	EOT
-
-	$XILINX_DIR/bin/lin64/edif2ngd testbench_synth.edif
-	$XILINX_DIR/bin/lin64/ngdbuild -p xc7k70t testbench_synth
-	$XILINX_DIR/bin/lin64/map -p xc7k70t-fbg676-1 -w -o testbench_mapped.ncd testbench_synth prffile.pcf
-	$XILINX_DIR/bin/lin64/par -w testbench_mapped.ncd testbench_synth.ncd prffile.pcf
-	$XILINX_DIR/bin/lin64/bitgen -f testbench_synth.ut testbench_synth.ncd
-fi
-
-if [ "$*" = "-clean" ]; then
-	rm -rf netlist.lst _xmsgs/ prffile.pcf
-	rm -f testbench_{synth,gold,gate,mapped}*
-fi
-