riscv
/
yosys
mirror of https://github.com/YosysHQ/yosys.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

manual: document $dffe, $dffsr, $_DFFE_*, $_DFFSR_* cells.

This commit is contained in:
whitequark 2019-12-05 09:39:34 +00:00
parent 5f4c35c753
commit 72a5674c03
1 changed files with 90 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

101
manual/CHAPTER_CellLib.tex
View File

@ -177,8 +177,8 @@ Verilog & Cell Type \\
\subsection{Registers}
D-Type Flip-Flops are represented by {\tt \$dff} cells. These cells have a clock port \B{CLK},
an input port \B{D} and an output port \B{Q}. The following parameters are available for \$dff
D-type flip-flops are represented by {\tt \$dff} cells. These cells have a clock port \B{CLK},
an input port \B{D} and an output port \B{Q}. The following parameters are available for {\tt \$dff}
cells:
\begin{itemize}
@ -190,13 +190,23 @@ Clock is active on the positive edge if this parameter has the value {\tt 1'b1}
edge if this parameter is {\tt 1'b0}.
\end{itemize}
D-Type Flip-Flops with asynchronous resets are represented by {\tt \$adff} cells. As the {\tt \$dff}
D-type flip-flops with enable are represented by {\tt \$dffe} cells. As the {\tt \$dff}
cells they have \B{CLK}, \B{D} and \B{Q} ports. In addition they also have a single-bit \B{EN}
input port for the enable pin and the following parameter:
\begin{itemize}
\item \B{EN\_POLARITY} \\
The enable input is active-high if this parameter has the value {\tt 1'b1} and active-low
if this parameter is {\tt 1'b0}.
\end{itemize}
D-type flip-flops with asynchronous reset are represented by {\tt \$adff} cells. As the {\tt \$dff}
cells they have \B{CLK}, \B{D} and \B{Q} ports. In addition they also have a single-bit \B{ARST}
input port for the reset pin and the following additional two parameters:
\begin{itemize}
\item \B{ARST\_POLARITY} \\
The asynchronous reset is high-active if this parameter has the value {\tt 1'b1} and low-active
The asynchronous reset is active-high if this parameter has the value {\tt 1'b1} and active-low
if this parameter is {\tt 1'b0}.
\item \B{ARST\_VALUE} \\
@ -210,8 +220,27 @@ Usually these cells are generated by the {\tt proc} pass using the information
in the designs RTLIL::Process objects.
\end{sloppypar}
D-type flip-flops with asynchronous set and reset are represented by {\tt \$dffsr} cells.
As the {\tt \$dff} cells they have \B{CLK}, \B{D} and \B{Q} ports. In addition they also have
a single-bit \B{SET} input port for the set pin, a single-bit \B{CLR} input port for the reset pin,
and the following two parameters:
\begin{itemize}
\item \B{SET\_POLARITY} \\
The set input is active-high if this parameter has the value {\tt 1'b1} and active-low
if this parameter is {\tt 1'b0}.
\item \B{CLR\_POLARITY} \\
The reset input is active-high if this parameter has the value {\tt 1'b1} and active-low
if this parameter is {\tt 1'b0}.
\end{itemize}
When both the set and reset inputs of a {\tt \$dffsr} cell are active, the reset input takes
precedence.
\begin{fixme}
Add information about {\tt \$sr} cells (set-reset flip-flops) and d-type latches.
Add information about {\tt \$sr} cells (set-reset flip-flops), {\tt \$dlatch} cells (d-type latches),
and {\tt \$dlatchsr} cells (d-type latches with set/reset).
\end{fixme}
\subsection{Memories}
@ -430,6 +459,30 @@ $ClkEdge$ & $RstLvl$ & $RstVal$ & Cell Type \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];1; & \lstinline[language=Verilog];0; & {\tt \$\_DFF\_PP0\_} \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];1; & \lstinline[language=Verilog];1; & {\tt \$\_DFF\_PP1\_} \\
\end{tabular}
% FIXME: the layout of this is broken and I have no idea how to fix it
\hfil
\begin{tabular}[t]{lll}
$ClkEdge$ & $EnLvl$ & Cell Type \\
\hline
\lstinline[language=Verilog];negedge; & \lstinline[language=Verilog];0; & {\tt \$\_DFFE\_NN\_} \\
\lstinline[language=Verilog];negedge; & \lstinline[language=Verilog];1; & {\tt \$\_DFFE\_NP\_} \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];0; & {\tt \$\_DFFE\_PN\_} \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];1; & {\tt \$\_DFFE\_PP\_} \\
\end{tabular}
% FIXME: the layout of this is broken too
\hfil
\begin{tabular}[t]{llll}
$ClkEdge$ & $SetLvl$ & $RstLvl$ & Cell Type \\
\hline
\lstinline[language=Verilog];negedge; & \lstinline[language=Verilog];0; & \lstinline[language=Verilog];0; & {\tt \$\_DFFSR\_NNN\_} \\
\lstinline[language=Verilog];negedge; & \lstinline[language=Verilog];0; & \lstinline[language=Verilog];1; & {\tt \$\_DFFSR\_NNP\_} \\
\lstinline[language=Verilog];negedge; & \lstinline[language=Verilog];1; & \lstinline[language=Verilog];0; & {\tt \$\_DFFSR\_NPN\_} \\
\lstinline[language=Verilog];negedge; & \lstinline[language=Verilog];1; & \lstinline[language=Verilog];1; & {\tt \$\_DFFSR\_NPP\_} \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];0; & \lstinline[language=Verilog];0; & {\tt \$\_DFFSR\_PNN\_} \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];0; & \lstinline[language=Verilog];1; & {\tt \$\_DFFSR\_PNP\_} \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];1; & \lstinline[language=Verilog];0; & {\tt \$\_DFFSR\_PPN\_} \\
\lstinline[language=Verilog];posedge; & \lstinline[language=Verilog];1; & \lstinline[language=Verilog];1; & {\tt \$\_DFFSR\_PPP\_} \\
\end{tabular}
\caption{Cell types for gate level logic networks}
\label{tab:CellLib_gates}
\end{table}
@ -438,11 +491,22 @@ Table~\ref{tab:CellLib_gates} lists all cell types used for gate level logic. Th
{\tt \$\_NOT\_}, {\tt \$\_AND\_}, {\tt \$\_NAND\_}, {\tt \$\_ANDNOT\_}, {\tt \$\_OR\_}, {\tt \$\_NOR\_},
{\tt \$\_ORNOT\_}, {\tt \$\_XOR\_}, {\tt \$\_XNOR\_} and {\tt \$\_MUX\_} are used to model combinatorial logic.
The cell type {\tt \$\_TBUF\_} is used to model tristate logic.
The cell types {\tt \$\_DFF\_N\_} and {\tt \$\_DFF\_P\_} represent d-type flip-flops.
The cell types {\tt \$\_DFFE\_NN\_}, {\tt \$\_DFFE\_NP\_}, {\tt \$\_DFFE\_PN\_} and {\tt \$\_DFFE\_PP\_}
implement d-type flip-flops with enable. The values in the table for these cell types relate to the
following Verilog code template.
\begin{lstlisting}[mathescape,language=Verilog]
always @($ClkEdge$ C)
if (EN == $EnLvl$)
Q <= D;
\end{lstlisting}
The cell types {\tt \$\_DFF\_NN0\_}, {\tt \$\_DFF\_NN1\_}, {\tt \$\_DFF\_NP0\_}, {\tt \$\_DFF\_NP1\_},
{\tt \$\_DFF\_PN0\_}, {\tt \$\_DFF\_PN1\_}, {\tt \$\_DFF\_PP0\_} and {\tt \$\_DFF\_PP1\_} implement
d-type flip-flops with asynchronous resets. The values in the table for these cell types relate to the
d-type flip-flops with asynchronous reset. The values in the table for these cell types relate to the
following Verilog code template, where \lstinline[mathescape,language=Verilog];$RstEdge$; is \lstinline[language=Verilog];posedge;
if \lstinline[mathescape,language=Verilog];$RstLvl$; if \lstinline[language=Verilog];1;, and \lstinline[language=Verilog];negedge;
otherwise.
@ -455,6 +519,25 @@ otherwise.
Q <= D;
\end{lstlisting}
The cell types {\tt \$\_DFFSR\_NNN\_}, {\tt \$\_DFFSR\_NNP\_}, {\tt \$\_DFFSR\_NPN\_}, {\tt \$\_DFFSR\_NPP\_},
{\tt \$\_DFFSR\_PNN\_}, {\tt \$\_DFFSR\_PNP\_}, {\tt \$\_DFFSR\_PPN\_} and {\tt \$\_DFFSR\_PPP\_} implement
d-type flip-flops with asynchronous set and reset. The values in the table for these cell types relate to the
following Verilog code template, where \lstinline[mathescape,language=Verilog];$RstEdge$; is \lstinline[language=Verilog];posedge;
if \lstinline[mathescape,language=Verilog];$RstLvl$; if \lstinline[language=Verilog];1;, \lstinline[language=Verilog];negedge;
otherwise, and \lstinline[mathescape,language=Verilog];$SetEdge$; is \lstinline[language=Verilog];posedge;
if \lstinline[mathescape,language=Verilog];$SetLvl$; if \lstinline[language=Verilog];1;, \lstinline[language=Verilog];negedge;
otherwise.
\begin{lstlisting}[mathescape,language=Verilog]
always @($ClkEdge$ C, $RstEdge$ R, $SetEdge$ S)
if (R == $RstLvl$)
Q <= 0;
else if (S == $SetLvl$)
Q <= 1;
else
Q <= D;
\end{lstlisting}
In most cases gate level logic networks are created from RTL networks using the {\tt techmap} pass. The flip-flop cells
from the gate level logic network can be mapped to physical flip-flop cells from a Liberty file using the {\tt dfflibmap}
pass. The combinatorial logic cells can be mapped to physical cells from a Liberty file via ABC \citeweblink{ABC}
@ -486,11 +569,7 @@ Add information about {\tt \$ff} and {\tt \$\_FF\_} cells.
\end{fixme}
\begin{fixme}
Add information about {\tt \$dffe}, {\tt \$dffsr}, {\tt \$dlatch}, and {\tt \$dlatchsr} cells.
\end{fixme}
\begin{fixme}
Add information about {\tt \$\_DFFE\_??\_}, {\tt \$\_DFFSR\_???\_}, {\tt \$\_DLATCH\_?\_}, and {\tt \$\_DLATCHSR\_???\_} cells.
Add information about {\tt \$\_DLATCH\_?\_}, and {\tt \$\_DLATCHSR\_???\_} cells.
\end{fixme}
\begin{fixme}