Merge pull request #12 from jameswalmsley/master

[EXAMPLES] Ported the mojo counter example to Zynq ZED board.

techlibs/xilinx/example_zed_counter/README

@@ -0,0 +1,10 @@
+
+This is a simple example for Yosys synthesis targeting the ZED FPGA
+development board [1, 2]. Simple script for xst-based synthesis (incl.
+generation of reference edif files) and uploading to the board can be
+found here [3].
+
+[1] http://www.zedboard.org/
+[2] https://www.xilinx.com/zynq/
+[3] http://verilog.james.walms.co.uk/
+

techlibs/xilinx/example_zed_counter/example.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+set -ex
+
+XILINX_DIR=/opt/Xilinx/14.7/ISE_DS/ISE
+XILINX_PART=xc7z020clg484-1
+
+yosys - <<- EOT
+	read_verilog example.v
+	synth_xilinx -edif synth.edif
+EOT
+
+$XILINX_DIR/bin/lin64/edif2ngd -a synth.edif synth.ngo
+$XILINX_DIR/bin/lin64/ngdbuild -p $XILINX_PART -uc example.ucf synth.ngo synth.ngd
+$XILINX_DIR/bin/lin64/map -p $XILINX_PART -w -o mapped.ncd synth.ngd constraints.pcf
+$XILINX_DIR/bin/lin64/par -w mapped.ncd placed.ncd constraints.pcf
+$XILINX_DIR/bin/lin64/bitgen -w placed.ncd example.bit constraints.pcf
+$XILINX_DIR/bin/lin64/promgen -w -b -p bin -o example.bin -u 0 example.bit -data_width 32

techlibs/xilinx/example_zed_counter/example.ucf

@@ -0,0 +1,14 @@
+NET "clk" TNM_NET = clk;
+TIMESPEC TS_clk = PERIOD "clk" 50 MHz HIGH 50%;
+
+NET "clk" LOC = Y9		| IOSTANDARD=LVCMOS33;  # "GCLK"
+NET "ctrl" LOC = P16	| IOSTANDARD=LVCMOS18;  # "BTNC"
+
+NET "led_0" LOC = T22 | IOSTANDARD=LVCMOS33;  # "LD0"
+NET "led_1" LOC = T21 | IOSTANDARD=LVCMOS33;  # "LD0"
+NET "led_2" LOC = U22 | IOSTANDARD=LVCMOS33;  # "LD0"
+NET "led_3" LOC = U21 | IOSTANDARD=LVCMOS33;  # "LD0"
+NET "led_4" LOC = V22 | IOSTANDARD=LVCMOS33;  # "LD0"
+NET "led_5" LOC = W22 | IOSTANDARD=LVCMOS33;  # "LD0"
+NET "led_6" LOC = U19 | IOSTANDARD=LVCMOS33;  # "LD0"
+NET "led_7" LOC = U14 | IOSTANDARD=LVCMOS33;  # "LD0"

techlibs/xilinx/example_zed_counter/example.v

@@ -0,0 +1,14 @@
+module top(clk, ctrl, led_7, led_6, led_5, led_4, led_3, led_2, led_1, led_0);
+
+input clk, ctrl;
+output led_7, led_6, led_5, led_4;
+output led_3, led_2, led_1, led_0;
+
+reg [31:0] counter;
+
+always @(posedge clk)
+	counter <= counter + (ctrl ? 4 : 1);
+
+assign {led_7, led_6, led_5, led_4, led_3, led_2, led_1, led_0} = counter >> 24;
+
+endmodule