From 2e37e62e6b926ca1712b1636ef720748e382dc97 Mon Sep 17 00:00:00 2001
From: Dan Ravensloft <dan.ravensloft@gmail.com>
Date: Tue, 19 Nov 2019 10:19:00 +0000
Subject: [PATCH] synth_intel_alm: alternative synthesis for Intel FPGAs

By operating at a layer of abstraction over the rather clumsy Intel primitives,
we can avoid special hacks like `dffinit -highlow` in favour of simple techmapping.

This also makes the primitives much easier to manipulate, and more descriptive
(no more cyclonev_lcell_comb to mean anything from a LUT2 to a LUT6).
---
 Makefile                                      |   1 +
 techlibs/intel/Makefile.inc                   |   1 -
 techlibs/intel_alm/Makefile.inc               |  23 +
 techlibs/intel_alm/common/alm_map.v           |  56 ++
 techlibs/intel_alm/common/alm_sim.v           | 482 ++++++++++++++++++
 techlibs/intel_alm/common/arith_alm_map.v     |  64 +++
 techlibs/intel_alm/common/bram_m10k.txt       |  33 ++
 techlibs/intel_alm/common/bram_m10k_map.v     |  31 ++
 techlibs/intel_alm/common/bram_m20k.txt       |  33 ++
 techlibs/intel_alm/common/bram_m20k_map.v     |  31 ++
 techlibs/intel_alm/common/dff_map.v           | 124 +++++
 techlibs/intel_alm/common/dff_sim.v           |  48 ++
 techlibs/intel_alm/common/lutram_mlab.txt     |  20 +
 techlibs/intel_alm/common/lutram_mlab_map.v   |  29 ++
 techlibs/intel_alm/common/megafunction_bb.v   | 108 ++++
 techlibs/intel_alm/common/quartus_rename.v    |  23 +
 .../intel_alm/cyclone10gx/quartus_rename.v    |  54 ++
 techlibs/intel_alm/cyclonev/quartus_rename.v  |  54 ++
 techlibs/intel_alm/synth_intel_alm.cc         | 240 +++++++++
 tests/arch/intel_alm/add_sub.ys               |   8 +
 tests/arch/intel_alm/adffs.ys                 |  48 ++
 tests/arch/intel_alm/counter.ys               |  13 +
 tests/arch/intel_alm/dffs.ys                  |  22 +
 tests/arch/intel_alm/fsm.ys                   |  18 +
 tests/arch/intel_alm/logic.ys                 |  11 +
 tests/arch/intel_alm/mux.ys                   |  45 ++
 tests/arch/intel_alm/run-test.sh              |  20 +
 tests/arch/intel_alm/shifter.ys               |  10 +
 tests/arch/intel_alm/tribuf.ys                |  13 +
 29 files changed, 1662 insertions(+), 1 deletion(-)
 create mode 100644 techlibs/intel_alm/Makefile.inc
 create mode 100644 techlibs/intel_alm/common/alm_map.v
 create mode 100644 techlibs/intel_alm/common/alm_sim.v
 create mode 100644 techlibs/intel_alm/common/arith_alm_map.v
 create mode 100644 techlibs/intel_alm/common/bram_m10k.txt
 create mode 100644 techlibs/intel_alm/common/bram_m10k_map.v
 create mode 100644 techlibs/intel_alm/common/bram_m20k.txt
 create mode 100644 techlibs/intel_alm/common/bram_m20k_map.v
 create mode 100644 techlibs/intel_alm/common/dff_map.v
 create mode 100644 techlibs/intel_alm/common/dff_sim.v
 create mode 100644 techlibs/intel_alm/common/lutram_mlab.txt
 create mode 100644 techlibs/intel_alm/common/lutram_mlab_map.v
 create mode 100644 techlibs/intel_alm/common/megafunction_bb.v
 create mode 100644 techlibs/intel_alm/common/quartus_rename.v
 create mode 100644 techlibs/intel_alm/cyclone10gx/quartus_rename.v
 create mode 100644 techlibs/intel_alm/cyclonev/quartus_rename.v
 create mode 100644 techlibs/intel_alm/synth_intel_alm.cc
 create mode 100644 tests/arch/intel_alm/add_sub.ys
 create mode 100644 tests/arch/intel_alm/adffs.ys
 create mode 100644 tests/arch/intel_alm/counter.ys
 create mode 100644 tests/arch/intel_alm/dffs.ys
 create mode 100644 tests/arch/intel_alm/fsm.ys
 create mode 100644 tests/arch/intel_alm/logic.ys
 create mode 100644 tests/arch/intel_alm/mux.ys
 create mode 100755 tests/arch/intel_alm/run-test.sh
 create mode 100644 tests/arch/intel_alm/shifter.ys
 create mode 100644 tests/arch/intel_alm/tribuf.ys

diff --git a/Makefile b/Makefile
index 3f8922bfd..fc417ab9d 100644
--- a/Makefile
+++ b/Makefile
@@ -737,6 +737,7 @@ test: $(TARGETS) $(EXTRA_TARGETS)
 	+cd tests/arch/efinix && bash run-test.sh $(SEEDOPT)
 	+cd tests/arch/anlogic && bash run-test.sh $(SEEDOPT)
 	+cd tests/arch/gowin && bash run-test.sh $(SEEDOPT)
+	+cd tests/arch/intel_alm && bash run-test.sh $(SEEDOPT)
 	+cd tests/rpc && bash run-test.sh
 	+cd tests/memfile && bash run-test.sh
 	@echo ""
diff --git a/techlibs/intel/Makefile.inc b/techlibs/intel/Makefile.inc
index d97a9b58f..f751e341f 100644
--- a/techlibs/intel/Makefile.inc
+++ b/techlibs/intel/Makefile.inc
@@ -11,4 +11,3 @@ families := max10 arria10gx cyclonev cyclone10lp cycloneiv cycloneive
 $(foreach family,$(families), $(eval $(call add_share_file,share/intel/$(family),techlibs/intel/$(family)/cells_sim.v)))
 $(foreach family,$(families), $(eval $(call add_share_file,share/intel/$(family),techlibs/intel/$(family)/cells_map.v)))
 #$(eval $(call add_share_file,share/intel/cycloneive,techlibs/intel/cycloneive/arith_map.v))
-
diff --git a/techlibs/intel_alm/Makefile.inc b/techlibs/intel_alm/Makefile.inc
new file mode 100644
index 000000000..66204c8fc
--- /dev/null
+++ b/techlibs/intel_alm/Makefile.inc
@@ -0,0 +1,23 @@
+
+OBJS += techlibs/intel_alm/synth_intel_alm.o
+
+# Techmap
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/alm_map.v))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/alm_sim.v))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/arith_alm_map.v))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/dff_map.v))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/dff_sim.v))
+
+# RAM
+bramtypes := m10k m20k
+$(foreach bramtype, $(bramtypes), $(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/bram_$(bramtype).txt)))
+$(foreach bramtype, $(bramtypes), $(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/bram_$(bramtype)_map.v)))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/lutram_mlab.txt))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/lutram_mlab_map.v))
+
+families := cyclonev cyclone10gx
+
+# Miscellaneous
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/megafunction_bb.v))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/quartus_rename.v))
+$(foreach family, $(families), $(eval $(call add_share_file,share/intel_alm/$(family),techlibs/intel_alm/$(family)/quartus_rename.v)))
diff --git a/techlibs/intel_alm/common/alm_map.v b/techlibs/intel_alm/common/alm_map.v
new file mode 100644
index 000000000..fe646c5d6
--- /dev/null
+++ b/techlibs/intel_alm/common/alm_map.v
@@ -0,0 +1,56 @@
+module \$lut (A, Y);
+
+parameter WIDTH = 1;
+parameter LUT = 0;
+
+input [WIDTH-1:0] A;
+output Y;
+
+generate
+    if (WIDTH == 1) begin
+        generate
+            if (LUT == 2'b00) begin
+                assign Y = 1'b0;
+            end
+            else if (LUT == 2'b01) begin
+                MISTRAL_NOT _TECHMAP_REPLACE_(
+                    .A(A[0]), .Q(Y)
+                );
+            end
+            else if (LUT == 2'b10) begin
+                assign Y = A;
+            end
+            else if (LUT == 2'b11) begin
+                assign Y = 1'b1;
+            end
+        endgenerate
+    end else
+    if (WIDTH == 2) begin
+        MISTRAL_ALUT2 #(.LUT(LUT)) _TECHMAP_REPLACE_(
+            .A(A[0]), .B(A[1]), .Q(Y)
+        );
+    end else
+    if (WIDTH == 3) begin
+        MISTRAL_ALUT3 #(.LUT(LUT)) _TECHMAP_REPLACE_(
+            .A(A[0]), .B(A[1]), .C(A[2]), .Q(Y)
+        );
+    end else
+    if (WIDTH == 4) begin
+        MISTRAL_ALUT4 #(.LUT(LUT)) _TECHMAP_REPLACE_(
+            .A(A[0]), .B(A[1]), .C(A[2]), .D(A[3]), .Q(Y)
+        );
+    end else
+    if (WIDTH == 5) begin
+        MISTRAL_ALUT5 #(.LUT(LUT)) _TECHMAP_REPLACE_ (
+            .A(A[0]), .B(A[1]), .C(A[2]), .D(A[3]), .E(A[4]), .Q(Y)
+        );
+    end else
+    if (WIDTH == 6) begin
+        MISTRAL_ALUT6 #(.LUT(LUT)) _TECHMAP_REPLACE_ (
+            .A(A[0]), .B(A[1]), .C(A[2]), .D(A[3]), .E(A[4]), .F(A[5]), .Q(Y)
+        );
+    end else begin
+        wire _TECHMAP_FAIL_ = 1'b1;
+    end
+endgenerate
+endmodule
diff --git a/techlibs/intel_alm/common/alm_sim.v b/techlibs/intel_alm/common/alm_sim.v
new file mode 100644
index 000000000..69768d9f7
--- /dev/null
+++ b/techlibs/intel_alm/common/alm_sim.v
@@ -0,0 +1,482 @@
+`default_nettype none
+
+(* abc9_lut=2, lib_whitebox *)
+module MISTRAL_ALUT6(input A, B, C, D, E, F, output Q);
+
+parameter [63:0] LUT = 64'h0000_0000_0000_0000;
+
+`ifdef cyclonev
+specify
+    (A => Q) = 602;
+    (B => Q) = 584;
+    (C => Q) = 510;
+    (D => Q) = 510;
+    (E => Q) = 339;
+    (F => Q) = 94;
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (A => Q) = 275;
+    (B => Q) = 272;
+    (C => Q) = 175;
+    (D => Q) = 165;
+    (E => Q) = 162;
+    (F => Q) = 53;
+endspecify
+`endif
+
+assign Q = LUT >> {F, E, D, C, B, A};
+
+endmodule
+
+
+(* abc9_lut=1, lib_whitebox *)
+module MISTRAL_ALUT5(input A, B, C, D, E, output Q);
+
+parameter [31:0] LUT = 32'h0000_0000;
+
+`ifdef cyclonev
+specify
+    (A => Q) = 584;
+    (B => Q) = 510;
+    (C => Q) = 510;
+    (D => Q) = 339;
+    (E => Q) = 94;
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (A => Q) = 272;
+    (B => Q) = 175;
+    (C => Q) = 165;
+    (D => Q) = 162;
+    (E => Q) = 53;
+endspecify
+`endif
+
+assign Q = LUT >> {E, D, C, B, A};
+
+endmodule
+
+
+(* abc9_lut=1, lib_whitebox *)
+module MISTRAL_ALUT4(input A, B, C, D, output Q);
+
+parameter [15:0] LUT = 16'h0000;
+
+`ifdef cyclonev
+specify
+    (A => Q) = 510;
+    (B => Q) = 510;
+    (C => Q) = 339;
+    (D => Q) = 94;
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (A => Q) = 175;
+    (B => Q) = 165;
+    (C => Q) = 162;
+    (D => Q) = 53;
+endspecify
+`endif
+
+assign Q = LUT >> {D, C, B, A};
+
+endmodule
+
+
+(* abc9_lut=1, lib_whitebox *)
+module MISTRAL_ALUT3(input A, B, C, output Q);
+
+parameter [7:0] LUT = 8'h00;
+
+`ifdef cyclonev
+specify
+    (A => Q) = 510;
+    (B => Q) = 339;
+    (C => Q) = 94;
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (A => Q) = 165;
+    (B => Q) = 162;
+    (C => Q) = 53;
+endspecify
+`endif
+
+assign Q = LUT >> {C, B, A};
+
+endmodule
+
+
+(* abc9_lut=1, lib_whitebox *)
+module MISTRAL_ALUT2(input A, B, output Q);
+
+parameter [3:0] LUT = 4'h0;
+
+`ifdef cyclonev
+specify
+    (A => Q) = 339;
+    (B => Q) = 94;
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (A => Q) = 162;
+    (B => Q) = 53;
+endspecify
+`endif
+
+assign Q = LUT >> {B, A};
+
+endmodule
+
+
+(* abc9_lut=1, lib_whitebox *)
+module MISTRAL_NOT(input A, output Q);
+
+`ifdef cyclonev
+specify
+    (A => Q) = 94;
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (A => Q) = 53;
+endspecify
+`endif
+
+assign Q = ~A;
+
+endmodule
+
+(* abc9_box, lib_whitebox *)
+module MISTRAL_ALUT_ARITH(input A, B, C, D0, D1, (* abc9_carry *) input CI, output SO, (* abc9_carry *) output CO);
+
+parameter LUT0 = 16'h0000;
+parameter LUT1 = 16'h0000;
+
+`ifdef cyclonev
+specify
+    (A => SO) = 1283;
+    (B => SO) = 1167;
+    (C => SO) = 866;
+    (D0 => SO) = 756;
+    (D1 => SO) = 756;
+    (CI => SO) = 355;
+    (A => CO) = 950;
+    (B => CO) = 1039;
+    (C => CO) = 820;
+    (D0 => CO) = 1006;
+    (D1 => CO) = 1006;
+    (CI => CO) = 23;
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (A => SO) = 644;
+    (B => SO) = 477;
+    (C => SO) = 416;
+    (D0 => SO) = 380;
+    (D1 => SO) = 431;
+    (CI => SO) = 276;
+    (A => CO) = 525;
+    (B => CO) = 433;
+    (C => CO) = 712;
+    (D0 => CO) = 653;
+    (D1 => CO) = 593;
+    (CI => CO) = 16;
+endspecify
+`endif
+
+wire q0, q1;
+
+assign q0 = LUT0 >> {D0, C, B, A};
+assign q1 = LUT1 >> {D1, C, B, A};
+
+assign {CO, SO} = q0 + !q1 + CI;
+
+endmodule
+
+
+/*
+// A, B, C0, C1, E0, E1, F0, F1: data inputs
+// CARRYIN: carry input
+// SHAREIN: shared-arithmetic input
+// CLK0, CLK1, CLK2: clock inputs
+//
+// COMB0, COMB1: combinational outputs
+// FF0, FF1, FF2, FF3: DFF outputs
+// SUM0, SUM1: adder outputs
+// CARRYOUT: carry output
+// SHAREOUT: shared-arithmetic output
+module MISTRAL_ALM(
+    input A, B, C0, C1, E0, E1, F0, F1, CARRYIN, SHAREIN, // LUT path
+    input CLK0, CLK1, CLK2, AC0, AC1,                     // FF path
+    output COMB0, COMB1, SUM0, SUM1, CARRYOUT, SHAREOUT,
+    output FF0, FF1, FF2, FF3
+);
+
+parameter LUT0 = 16'b0000;
+parameter LUT1 = 16'b0000;
+parameter LUT2 = 16'b0000;
+parameter LUT3 = 16'b0000;
+
+parameter INIT0 = 1'b0;
+parameter INIT1 = 1'b0;
+parameter INIT2 = 1'b0;
+parameter INIT3 = 1'b0;
+
+parameter C0_MUX = "C0";
+parameter C1_MUX = "C1";
+
+parameter F0_MUX = "VCC";
+parameter F1_MUX = "GND";
+
+parameter FEEDBACK0 = "FF0";
+parameter FEEDBACK1 = "FF2";
+
+parameter ADD_MUX = "LUT";
+
+parameter DFF01_DATA_MUX = "COMB";
+parameter DFF23_DATA_MUX = "COMB";
+
+parameter DFF0_CLK = "CLK0";
+parameter DFF1_CLK = "CLK0";
+parameter DFF2_CLK = "CLK0";
+parameter DFF3_CLK = "CLK0";
+
+parameter DFF0_AC  = "AC0";
+parameter DFF1_AC  = "AC0";
+parameter DFF2_AC  = "AC0";
+parameter DFF3_AC  = "AC0";
+
+// Feedback muxes from the flip-flop outputs.
+wire ff_feedback_mux0, ff_feedback_mux1;
+
+// C-input muxes which can be set to also use the F-input.
+wire c0_input_mux, c1_input_mux;
+
+// F-input muxes which can be set to a constant to allow LUT5 use.
+wire f0_input_mux, f1_input_mux;
+
+// Adder input muxes to select between shared-arithmetic mode and arithmetic mode.
+wire add0_input_mux, add1_input_mux;
+
+// Combinational-output muxes for LUT #1 and LUT #3
+wire lut1_comb_mux, lut3_comb_mux;
+
+// Sum-output muxes for LUT #1 and LUT #3
+wire lut1_sum_mux, lut3_sum_mux;
+
+// DFF data-input muxes
+wire dff01_data_mux, dff23_data_mux;
+
+// DFF clock selectors
+wire dff0_clk, dff1_clk, dff2_clk, dff3_clk;
+
+// DFF asynchronous-clear selectors
+wire dff0_ac, dff1_ac, dff2_ac, dff3_ac;
+
+// LUT, DFF and adder output wires for routing.
+wire lut0_out, lut1a_out, lut1b_out, lut2_out, lut3a_out, lut3b_out;
+wire dff0_out, dff1_out, dff2_out, dff3_out;
+wire add0_sum, add1_sum, add0_carry, add1_carry;
+
+generate
+    if (FEEDBACK0 === "FF0")
+        assign ff_feedback_mux0 = dff0_out;
+    else if (FEEDBACK0 === "FF1")
+        assign ff_feedback_mux0 = dff1_out;
+    else
+        $error("Invalid FEEDBACK0 setting!");
+
+    if (FEEDBACK1 == "FF2")
+        assign ff_feedback_mux1 = dff2_out;
+    else if (FEEDBACK1 == "FF3")
+        assign ff_feedback_mux1 = dff3_out;
+    else
+        $error("Invalid FEEDBACK1 setting!");
+
+    if (C0_MUX === "C0")
+        assign c0_input_mux = C0;
+    else if (C0_MUX === "F1")
+        assign c0_input_mux = F1;
+    else if (C0_MUX === "FEEDBACK1")
+        assign c0_input_mux = ff_feedback_mux1;
+    else
+        $error("Invalid C0_MUX setting!");
+
+    if (C1_MUX === "C1")
+        assign c1_input_mux = C1;
+    else if (C1_MUX === "F0")
+        assign c1_input_mux = F0;
+    else if (C1_MUX === "FEEDBACK0")
+        assign c1_input_mux = ff_feedback_mux0;
+    else
+        $error("Invalid C1_MUX setting!");
+
+    // F0 == VCC is LUT5
+    // F0 == F0 is LUT6
+    // F0 == FEEDBACK is unknown
+    if (F0_MUX === "VCC")
+        assign f0_input_mux = 1'b1;
+    else if (F0_MUX === "F0")
+        assign f0_input_mux = F0;
+    else if (F0_MUX === "FEEDBACK0")
+        assign f0_input_mux = ff_feedback_mux0;
+    else
+        $error("Invalid F0_MUX setting!");
+
+    // F1 == GND is LUT5
+    // F1 == F1 is LUT6
+    // F1 == FEEDBACK is unknown
+    if (F1_MUX === "GND")
+        assign f1_input_mux = 1'b0;
+    else if (F1_MUX === "F1")
+        assign f1_input_mux = F1;
+    else if (F1_MUX === "FEEDBACK1")
+        assign f1_input_mux = ff_feedback_mux1;
+    else
+        $error("Invalid F1_MUX setting!");
+
+    if (ADD_MUX === "LUT") begin
+        assign add0_input_mux = ~lut1_sum_mux;
+        assign add1_input_mux = ~lut3_sum_mux;
+    end else if (ADD_MUX === "SHARE") begin
+        assign add0_input_mux = SHAREIN;
+        assign add1_input_mux = lut1_comb_mux;
+    end else
+        $error("Invalid ADD_MUX setting!");
+
+    if (DFF01_DATA_MUX === "COMB")
+        assign dff01_data_mux = COMB0;
+    else if (DFF01_DATA_MUX === "SUM")
+        assign dff01_data_mux = SUM0;
+    else
+        $error("Invalid DFF01_DATA_MUX setting!");
+
+    if (DFF23_DATA_MUX === "COMB")
+        assign dff23_data_mux = COMB0;
+    else if (DFF23_DATA_MUX === "SUM")
+        assign dff23_data_mux = SUM0;
+    else
+        $error("Invalid DFF23_DATA_MUX setting!");
+
+    if (DFF0_CLK === "CLK0")
+        assign dff0_clk = CLK0;
+    else if (DFF0_CLK === "CLK1")
+        assign dff0_clk = CLK1;
+    else if (DFF0_CLK === "CLK2")
+        assign dff0_clk = CLK2;
+    else
+        $error("Invalid DFF0_CLK setting!");
+
+    if (DFF1_CLK === "CLK0")
+        assign dff1_clk = CLK0;
+    else if (DFF1_CLK === "CLK1")
+        assign dff1_clk = CLK1;
+    else if (DFF1_CLK === "CLK2")
+        assign dff1_clk = CLK2;
+    else
+        $error("Invalid DFF1_CLK setting!");
+
+    if (DFF2_CLK === "CLK0")
+        assign dff2_clk = CLK0;
+    else if (DFF2_CLK === "CLK1")
+        assign dff2_clk = CLK1;
+    else if (DFF2_CLK === "CLK2")
+        assign dff2_clk = CLK2;
+    else
+        $error("Invalid DFF2_CLK setting!");
+
+    if (DFF3_CLK === "CLK0")
+        assign dff3_clk = CLK0;
+    else if (DFF3_CLK === "CLK1")
+        assign dff3_clk = CLK1;
+    else if (DFF3_CLK === "CLK2")
+        assign dff3_clk = CLK2;
+    else
+        $error("Invalid DFF3_CLK setting!");
+
+    if (DFF0_AC === "AC0")
+        assign dff0_ac = AC0;
+    else if (DFF0_AC === "AC1")
+        assign dff0_ac = AC1;
+    else
+        $error("Invalid DFF0_AC setting!");
+
+    if (DFF1_AC === "AC0")
+        assign dff1_ac = AC0;
+    else if (DFF1_AC === "AC1")
+        assign dff1_ac = AC1;
+    else
+        $error("Invalid DFF1_AC setting!");
+
+    if (DFF2_AC === "AC0")
+        assign dff2_ac = AC0;
+    else if (DFF2_AC === "AC1")
+        assign dff2_ac = AC1;
+    else
+        $error("Invalid DFF2_AC setting!");
+
+    if (DFF3_AC === "AC0")
+        assign dff3_ac = AC0;
+    else if (DFF3_AC === "AC1")
+        assign dff3_ac = AC1;
+    else
+        $error("Invalid DFF3_AC setting!");
+
+endgenerate
+
+// F0 on the Quartus diagram
+MISTRAL_ALUT4 #(.LUT(LUT0)) lut0 (.A(A), .B(B), .C(C0), .D(c1_input_mux), .Q(lut0_out));
+
+// F2 on the Quartus diagram
+MISTRAL_ALUT4 #(.LUT(LUT1)) lut1_comb (.A(A), .B(B), .C(C0), .D(c1_input_mux), .Q(lut1_comb_mux));
+MISTRAL_ALUT4 #(.LUT(LUT1)) lut1_sum  (.A(A), .B(B), .C(C0), .D(E0), .Q(lut1_sum_mux));
+
+// F1 on the Quartus diagram
+MISTRAL_ALUT4 #(.LUT(LUT2)) lut2 (.A(A), .B(B), .C(C1), .D(c0_input_mux), .Q(lut2_out));
+
+// F3 on the Quartus diagram
+MISTRAL_ALUT4 #(.LUT(LUT3)) lut3_comb (.A(A), .B(B), .C(C1), .D(c0_input_mux), .Q(lut3_comb_mux));
+MISTRAL_ALUT4 #(.LUT(LUT3)) lut3_sum  (.A(A), .B(B), .C(C1), .D(E1), .Q(lut3_sum_mux));
+
+MISTRAL_FF #(.INIT(INIT0)) dff0 (.D(dff01_data_mux), .CLK(dff0_clk), .ACn(dff0_ac), .Q(dff0_out));
+MISTRAL_FF #(.INIT(INIT1)) dff1 (.D(dff01_data_mux), .CLK(dff1_clk), .ACn(dff1_ac), .Q(dff1_out));
+MISTRAL_FF #(.INIT(INIT2)) dff2 (.D(dff23_data_mux), .CLK(dff2_clk), .ACn(dff2_ac), .Q(dff2_out));
+MISTRAL_FF #(.INIT(INIT3)) dff3 (.D(dff23_data_mux), .CLK(dff3_clk), .ACn(dff3_ac), .Q(dff3_out));
+
+// Adders
+assign {add0_carry, add0_sum} = CARRYIN + lut0_out + lut1_sum_mux;
+assign {add1_carry, add1_sum} = add0_carry + lut2_out + lut3_sum_mux;
+
+// COMBOUT outputs on the Quartus diagram
+assign COMB0 = E0 ? (f0_input_mux ? lut3_comb_mux : lut1_comb_mux)
+                    : (f0_input_mux ? lut2_out : lut0_out);
+
+assign COMB1 = E1 ? (f1_input_mux ? lut3_comb_mux : lut1_comb_mux)
+                    : (f1_input_mux ? lut2_out : lut0_out);
+
+// SUMOUT output on the Quartus diagram
+assign SUM0 = add0_sum;
+assign SUM1 = add1_sum;
+
+// COUT output on the Quartus diagram
+assign CARRYOUT = add1_carry;
+
+// SHAREOUT output on the Quartus diagram
+assign SHAREOUT = lut3_comb_mux;
+
+// REGOUT outputs on the Quartus diagram
+assign FF0 = dff0_out;
+assign FF1 = dff1_out;
+assign FF2 = dff2_out;
+assign FF3 = dff3_out;
+
+endmodule
+*/
diff --git a/techlibs/intel_alm/common/arith_alm_map.v b/techlibs/intel_alm/common/arith_alm_map.v
new file mode 100644
index 000000000..ddf81d9d0
--- /dev/null
+++ b/techlibs/intel_alm/common/arith_alm_map.v
@@ -0,0 +1,64 @@
+`default_nettype none
+
+module \$alu (A, B, CI, BI, X, Y, CO);
+
+parameter A_SIGNED = 0;
+parameter B_SIGNED = 0;
+parameter A_WIDTH = 1;
+parameter B_WIDTH = 1;
+parameter Y_WIDTH = 1;
+
+parameter _TECHMAP_CONSTMSK_CI_ = 0;
+parameter _TECHMAP_CONSTVAL_CI_ = 0;
+
+input [A_WIDTH-1:0] A;
+input [B_WIDTH-1:0] B;
+input CI, BI;
+output [Y_WIDTH-1:0] X, Y, CO;
+
+wire [Y_WIDTH-1:0] A_buf, B_buf;
+\$pos #(.A_SIGNED(A_SIGNED), .A_WIDTH(A_WIDTH), .Y_WIDTH(Y_WIDTH)) A_conv (.A(A), .Y(A_buf));
+\$pos #(.A_SIGNED(B_SIGNED), .A_WIDTH(B_WIDTH), .Y_WIDTH(Y_WIDTH)) B_conv (.A(B), .Y(B_buf));
+
+wire [Y_WIDTH-1:0] AA = A_buf;
+wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf;
+wire [Y_WIDTH-1:0] BX = B_buf;
+wire [Y_WIDTH:0] ALM_CARRY;
+
+// Start of carry chain
+generate
+    if (_TECHMAP_CONSTMSK_CI_ == 1) begin
+        assign ALM_CARRY[0] = _TECHMAP_CONSTVAL_CI_;
+    end else begin
+        MISTRAL_ALUT_ARITH #(
+            .LUT0(16'b1010_1010_1010_1010), // Q = A
+            .LUT1(16'b0000_0000_0000_0000), // Q = 0 (LUT1's input to the adder is inverted)
+        ) alm_start (
+            .A(CI), .B(1'b1), .C(1'b1), .D0(1'b1), .D1(1'b1),
+            .CI(1'b0),
+            .CO(ALM_CARRY[0])
+        );
+    end
+endgenerate
+
+// Carry chain
+genvar i;
+generate for (i = 0; i < Y_WIDTH; i = i + 1) begin:slice
+    // TODO: mwk suggests that a pass could merge pre-adder logic into this.
+    MISTRAL_ALUT_ARITH #(
+        .LUT0(16'b1010_1010_1010_1010), // Q = A
+        .LUT1(16'b1100_0011_1100_0011), // Q = C ? B : ~B (LUT1's input to the adder is inverted)
+    ) alm_i (
+        .A(AA[i]), .B(BX[i]), .C(BI), .D0(1'b1), .D1(1'b1),
+        .CI(ALM_CARRY[i]),
+        .SO(Y[i]),
+        .CO(ALM_CARRY[i+1])
+    );
+
+    // ALM carry chain is not directly accessible, so calculate the carry through soft logic if really needed.
+    assign CO[i] = (AA[i] && BB[i]) || ((Y[i] ^ AA[i] ^ BB[i]) && (AA[i] || BB[i]));
+end endgenerate
+
+assign X = AA ^ BB;
+
+endmodule
diff --git a/techlibs/intel_alm/common/bram_m10k.txt b/techlibs/intel_alm/common/bram_m10k.txt
new file mode 100644
index 000000000..837e3a330
--- /dev/null
+++ b/techlibs/intel_alm/common/bram_m10k.txt
@@ -0,0 +1,33 @@
+bram __MISTRAL_M10K_SDP
+    init   0   # TODO: Re-enable when I figure out how BRAM init works
+    abits 13   @D8192x1
+    dbits  1   @D8192x1
+    abits 12   @D4096x2
+    dbits  2   @D4096x2
+    abits 11   @D2048x4 @D2048x5
+    dbits  4   @D2048x4
+    dbits  5   @D2048x5
+    abits 10   @D1024x8 @D1024x10
+    dbits  8   @D1024x8
+    dbits 10   @D1024x10
+    abits  9   @D512x16 @D512x20
+    dbits 16   @D512x16
+    dbits 20   @D512x20
+    abits  8   @D256x32 @D256x40
+    dbits 32   @D256x32
+    dbits 40   @D256x40
+    groups 2
+    ports  1 1
+    wrmode 1 0
+    # read enable; write enable + byte enables (only for multiples of 8)
+    enable 1 1
+    transp 0 0
+    clocks 1 1
+    clkpol 1 1
+endbram
+
+
+match __MISTRAL_M10K_SDP
+    min efficiency 5
+    make_transp
+endmatch
diff --git a/techlibs/intel_alm/common/bram_m10k_map.v b/techlibs/intel_alm/common/bram_m10k_map.v
new file mode 100644
index 000000000..e5566010d
--- /dev/null
+++ b/techlibs/intel_alm/common/bram_m10k_map.v
@@ -0,0 +1,31 @@
+module __MISTRAL_M10K_SDP(CLK1, A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN);
+
+parameter CFG_ABITS = 10;
+parameter CFG_DBITS = 10;
+parameter CFG_ENABLE_A = 1;
+parameter CFG_ENABLE_B = 1;
+
+input CLK1;
+input [CFG_ABITS-1:0] A1ADDR, B1ADDR;
+input [CFG_DBITS-1:0] A1DATA;
+output [CFG_DBITS-1:0] B1DATA;
+input [CFG_ENABLE_A-1:0] A1EN, B1EN;
+
+altsyncram #(
+    .operation_mode("dual_port"),
+    .ram_block_type("m10k"),
+    .widthad_a(CFG_ABITS),
+    .width_a(CFG_DBITS),
+    .widthad_b(CFG_ABITS),
+    .width_b(CFG_DBITS),
+) _TECHMAP_REPLACE_ (
+    .address_a(A1ADDR),
+    .data_a(A1DATA),
+    .wren_a(A1EN),
+    .address_b(B1ADDR),
+    .q_b(B1DATA),
+    .clock0(CLK1),
+    .clock1(CLK1)
+);
+
+endmodule
diff --git a/techlibs/intel_alm/common/bram_m20k.txt b/techlibs/intel_alm/common/bram_m20k.txt
new file mode 100644
index 000000000..b4c5a5372
--- /dev/null
+++ b/techlibs/intel_alm/common/bram_m20k.txt
@@ -0,0 +1,33 @@
+bram __MISTRAL_M20K_SDP
+    init   1   # TODO: Re-enable when I figure out how BRAM init works
+    abits 14   @D16384x1
+    dbits  1   @D16384x1
+    abits 13   @D8192x2
+    dbits  2   @D8192x2
+    abits 12   @D4096x4 @D4096x5
+    dbits  4   @D4096x4
+    dbits  5   @D4096x5
+    abits 11   @D2048x8 @D2048x10
+    dbits  8   @D2048x8
+    dbits 10   @D2048x10
+    abits 10   @D1024x16 @D1024x20
+    dbits 16   @D1024x16
+    dbits 20   @D1024x20
+    abits  9   @D512x32 @D512x40
+    dbits 32   @D512x32
+    dbits 40   @D512x40
+    groups 2
+    ports  1 1
+    wrmode 1 0
+    # read enable; write enable + byte enables (only for multiples of 8)
+    enable 1 1
+    transp 0 0
+    clocks 1 1
+    clkpol 1 1
+endbram
+
+
+match __MISTRAL_M20K_SDP
+    min efficiency 5
+    make_transp
+endmatch
diff --git a/techlibs/intel_alm/common/bram_m20k_map.v b/techlibs/intel_alm/common/bram_m20k_map.v
new file mode 100644
index 000000000..92f41310f
--- /dev/null
+++ b/techlibs/intel_alm/common/bram_m20k_map.v
@@ -0,0 +1,31 @@
+module __MISTRAL_M20K_SDP(CLK1, A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA, B1EN);
+
+parameter CFG_ABITS = 10;
+parameter CFG_DBITS = 20;
+parameter CFG_ENABLE_A = 1;
+parameter CFG_ENABLE_B = 1;
+
+input CLK1;
+input [CFG_ABITS-1:0] A1ADDR, B1ADDR;
+input [CFG_DBITS-1:0] A1DATA;
+output [CFG_DBITS-1:0] B1DATA;
+input [CFG_ENABLE_A-1:0] A1EN, B1EN;
+
+altsyncram #(
+    .operation_mode("dual_port"),
+    .ram_block_type("m20k"),
+    .widthad_a(CFG_ABITS),
+    .width_a(CFG_DBITS),
+    .widthad_b(CFG_ABITS),
+    .width_b(CFG_DBITS),
+) _TECHMAP_REPLACE_ (
+    .address_a(A1ADDR),
+    .data_a(A1DATA),
+    .wren_a(A1EN),
+    .address_b(B1ADDR),
+    .q_b(B1DATA),
+    .clock0(CLK1),
+    .clock1(CLK1)
+);
+
+endmodule
diff --git a/techlibs/intel_alm/common/dff_map.v b/techlibs/intel_alm/common/dff_map.v
new file mode 100644
index 000000000..f7f2fe3c3
--- /dev/null
+++ b/techlibs/intel_alm/common/dff_map.v
@@ -0,0 +1,124 @@
+`default_nettype none
+
+// D flip-flops
+module \$_DFF_P_ (input D, C, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(C), .ACLR(1'b1), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFF_P_ with INIT=1");
+endmodule
+
+module \$_DFF_N_ (input D, C, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(~C), .ACLR(1'b1), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFF_N_ with INIT=1");
+endmodule
+
+// D flip-flops with reset
+module \$_DFF_PP0_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(C), .ACLR(~R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFF_PP0_ with INIT=1");
+endmodule
+
+module \$_DFF_PN0_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(C), .ACLR(R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFF_PN0_ with INIT=1");
+endmodule
+
+module \$_DFF_NP0_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(~C), .ACLR(~R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFF_NP0_ with INIT=1");
+endmodule
+
+module \$_DFF_NN0_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(~C), .ACLR(R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFF_NN0_ with INIT=1");
+endmodule
+
+// D flip-flops with set
+module \$_DFF_PP1_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b1;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b0) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    wire Q_tmp;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(~D), .CLK(C), .ACLR(~R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q_tmp));
+    assign Q = ~Q_tmp;
+end else $error("Unsupported flop: $_DFF_PP1_ with INIT=0");
+endmodule
+
+module \$_DFF_PN1_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b1;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b0) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    wire Q_tmp;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(~D), .CLK(C), .ACLR(R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q_tmp));
+end else $error("Unsupported flop: $_DFF_PN1_ with INIT=0");
+endmodule
+
+module \$_DFF_NP1_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b1;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b0) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    wire Q_tmp;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(~D), .CLK(~C), .ACLR(~R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q_tmp));
+    assign Q = ~Q_tmp;
+end else $error("Unsupported flop: $_DFF_NP1_ with INIT=0");
+endmodule
+
+module \$_DFF_NN1_ (input D, C, R, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b1;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b0) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    wire Q_tmp;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(~D), .CLK(~C), .ACLR(R), .ENA(1'b1), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q_tmp));
+    assign Q = ~Q_tmp;
+end else $error("Unsupported flop: $_DFF_NN1_ with INIT=0");
+endmodule
+
+// D flip-flops with clock enable
+module \$_DFFE_PP_ (input D, C, E, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(C), .ACLR(1'b1), .ENA(E), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFFE_PP_ with INIT=1");
+endmodule
+
+module \$_DFFE_PN_ (input D, C, E, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(C), .ACLR(1'b1), .ENA(~E), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFFE_PN_ with INIT=1");
+endmodule
+
+module \$_DFFE_NP_ (input D, C, E, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(~C), .ACLR(1'b1), .ENA(E), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFFE_NP_ with INIT=1");
+endmodule
+
+module \$_DFFE_NN_ (input D, C, E, output Q);
+parameter _TECHMAP_WIREINIT_Q_ = 1'b0;
+if (_TECHMAP_WIREINIT_Q_ !== 1'b1) begin
+    wire _TECHMAP_REMOVEINIT_Q_ = 1'b1;
+    MISTRAL_FF _TECHMAP_REPLACE_(.DATAIN(D), .CLK(~C), .ACLR(1'b1), .ENA(~E), .SCLR(1'b0), .SLOAD(1'b0), .SDATA(1'b0), .Q(Q));
+end else $error("Unsupported flop: $_DFFE_NN_ with INIT=1");
+endmodule
diff --git a/techlibs/intel_alm/common/dff_sim.v b/techlibs/intel_alm/common/dff_sim.v
new file mode 100644
index 000000000..07865905f
--- /dev/null
+++ b/techlibs/intel_alm/common/dff_sim.v
@@ -0,0 +1,48 @@
+// DATAIN: synchronous data input
+// CLK: clock input (positive edge)
+// ACLR: asynchronous clear (negative-true)
+// ENA: clock-enable
+// SCLR: synchronous clear
+// SLOAD: synchronous load
+// SDATA: synchronous load data
+//
+// Q: data output
+//
+// Note: the DFFEAS primitive is mostly emulated; it does not reflect what the hardware implements.
+module MISTRAL_FF(
+    input DATAIN, CLK, ACLR, ENA, SCLR, SLOAD, SDATA,
+    output reg Q
+);
+
+`ifdef cyclonev
+specify
+    (posedge CLK => (Q : DATAIN)) = 262;
+    $setup(DATAIN, posedge CLK, 522);
+endspecify
+`endif
+`ifdef cyclone10gx
+specify
+    (posedge CLK => (Q : DATAIN)) = 219;
+    $setup(DATAIN, posedge CLK, 268);
+endspecify
+`endif
+
+initial begin
+    // Altera flops initialise to zero.
+	Q = 0;
+end
+
+always @(posedge CLK, negedge ACLR) begin
+    // Asynchronous clear
+    if (!ACLR) Q <= 0;
+    // Clock-enable
+	else if (ENA) begin
+        // Synchronous clear
+        if (SCLR) Q <= 0;
+        // Synchronous load
+        else if (SLOAD) Q <= SDATA;
+        else Q <= DATAIN;
+    end
+end
+
+endmodule
diff --git a/techlibs/intel_alm/common/lutram_mlab.txt b/techlibs/intel_alm/common/lutram_mlab.txt
new file mode 100644
index 000000000..1d6174d85
--- /dev/null
+++ b/techlibs/intel_alm/common/lutram_mlab.txt
@@ -0,0 +1,20 @@
+bram __MISTRAL_MLAB
+    init   0   # TODO: Re-enable when I figure out how LUTRAM init works
+    abits  5
+    dbits  16  @D32x16
+    dbits  18  @D32x18
+    dbits  20  @D32x20
+    groups 2
+    ports  1 1
+    wrmode 1 0
+    # read enable
+    enable 1 0
+    transp 1 0
+    clocks 1 2
+    clkpol 1 1
+endbram
+
+match __MISTRAL_MLAB
+    min efficiency 5
+    make_outreg
+endmatch
diff --git a/techlibs/intel_alm/common/lutram_mlab_map.v b/techlibs/intel_alm/common/lutram_mlab_map.v
new file mode 100644
index 000000000..3a9c8590e
--- /dev/null
+++ b/techlibs/intel_alm/common/lutram_mlab_map.v
@@ -0,0 +1,29 @@
+module __MISTRAL_MLAB(CLK1, CLK2, A1ADDR, A1DATA, A1EN, B1ADDR, B1DATA);
+
+parameter CFG_ABITS = 5;
+parameter CFG_DBITS = 20;
+
+input CLK1, CLK2;
+input [CFG_ABITS-1:0] A1ADDR, B1ADDR;
+input [CFG_DBITS-1:0] A1DATA;
+input A1EN;
+output [CFG_DBITS-1:0] B1DATA;
+
+altsyncram #(
+    .operation_mode("dual_port"),
+    .ram_block_type("mlab"),
+    .widthad_a(CFG_ABITS),
+    .width_a(CFG_DBITS),
+    .widthad_b(CFG_ABITS),
+    .width_b(CFG_DBITS),
+) _TECHMAP_REPLACE_ (
+    .address_a(A1ADDR),
+    .data_a(A1DATA),
+    .wren_a(A1EN),
+    .address_b(B1ADDR),
+    .q_b(B1DATA),
+    .clock0(CLK1),
+    .clock1(CLK1),
+);
+
+endmodule
diff --git a/techlibs/intel_alm/common/megafunction_bb.v b/techlibs/intel_alm/common/megafunction_bb.v
new file mode 100644
index 000000000..21ba73a09
--- /dev/null
+++ b/techlibs/intel_alm/common/megafunction_bb.v
@@ -0,0 +1,108 @@
+// Intel megafunction declarations, to avoid Yosys complaining.
+`default_nettype none
+
+(* blackbox *)
+module altera_std_synchronizer(clk, din, dout, reset_n);
+
+parameter depth = 2;
+
+input clk;
+input reset_n;
+input din;
+output dout;
+
+endmodule
+
+(* blackbox *)
+module altiobuf_in(datain, dataout);
+
+parameter enable_bus_hold = "FALSE";
+parameter use_differential_mode = "FALSE";
+parameter number_of_channels = 1;
+
+input [number_of_channels-1:0] datain;
+output [number_of_channels-1:0] dataout;
+
+endmodule
+
+(* blackbox *)
+module altiobuf_out(datain, dataout);
+
+parameter enable_bus_hold = "FALSE";
+parameter use_differential_mode = "FALSE";
+parameter use_oe = "FALSE";
+parameter number_of_channels = 1;
+
+input [number_of_channels-1:0] datain;
+output [number_of_channels-1:0] dataout;
+
+endmodule
+
+(* blackbox *)
+module altiobuf_bidir(dataio, oe, datain, dataout);
+
+parameter number_of_channels = 1;
+parameter enable_bus_hold = "OFF";
+
+inout [number_of_channels-1:0] dataio;
+input [number_of_channels-1:0] datain;
+output [number_of_channels-1:0] dataout;
+input [number_of_channels-1:0] oe;
+
+endmodule
+
+(* blackbox *)
+module altsyncram(clock0, clock1, address_a, data_a, rden_a, wren_a, byteena_a, q_a, addressstall_a, address_b, data_b, rden_b, wren_b, byteena_b, q_b, addressstall_b, clocken0, clocken1, clocken2, clocken3, aclr0, aclr1, eccstatus);
+
+parameter lpm_type = "altsyncram";
+parameter operation_mode = "dual_port";
+parameter ram_block_type = "auto";
+parameter intended_device_family = "auto";
+parameter power_up_uninitialized = "false";
+parameter read_during_write_mode_mixed_ports = "dontcare";
+parameter byte_size = 8;
+parameter widthad_a = 1;
+parameter width_a = 1;
+parameter width_byteena_a = 1;
+parameter numwords_a = 1;
+parameter clock_enable_input_a = "clocken0";
+parameter widthad_b = 1;
+parameter width_b = 1;
+parameter numwords_b = 1;
+parameter address_aclr_b = "aclr0";
+parameter address_reg_b = "";
+parameter outdata_aclr_b = "aclr0";
+parameter outdata_reg_b = "";
+parameter clock_enable_input_b = "clocken0";
+parameter clock_enable_output_b = "clocken0";
+
+input clock0, clock1;
+input [widthad_a-1:0] address_a;
+input [width_a-1:0] data_a;
+input rden_a;
+input wren_a;
+input [(width_a/8)-1:0] byteena_a;
+input addressstall_a;
+
+output [width_a-1:0] q_a;
+
+input wren_b;
+input rden_b;
+input [widthad_b-1:0] address_b;
+input [width_b-1:0] data_b;
+input [(width_b/8)-1:0] byteena_b;
+input addressstall_b;
+
+output [width_b-1:0] q_b;
+
+input clocken0;
+input clocken1;
+input clocken2;
+input clocken3;
+
+input aclr0;
+input aclr1;
+
+output eccstatus;
+
+endmodule
diff --git a/techlibs/intel_alm/common/quartus_rename.v b/techlibs/intel_alm/common/quartus_rename.v
new file mode 100644
index 000000000..e69eefeb7
--- /dev/null
+++ b/techlibs/intel_alm/common/quartus_rename.v
@@ -0,0 +1,23 @@
+module __MISTRAL_VCC(output Q);
+
+MISTRAL_ALUT2 #(.LUT(4'b1111)) _TECHMAP_REPLACE_ (.A(1'b1), .B(1'b1), .Q(Q));
+
+endmodule
+
+
+module __MISTRAL_GND(output Q);
+
+MISTRAL_ALUT2 #(.LUT(4'b0000)) _TECHMAP_REPLACE_ (.A(1'b1), .B(1'b1), .Q(Q));
+
+endmodule
+
+
+module MISTRAL_FF(input D, CLK, ACn, ALD, AD, EN, output reg Q);
+
+parameter INIT = 1'b0;
+
+localparam [1023:0] INIT_STR = (INIT !== 1'b1) ? "low" : "high";
+
+dffeas #(.power_up(INIT_STR), .is_wysiwyg("true")) _TECHMAP_REPLACE_ (.d(D), .clk(CLK), .clrn(ACn), .aload(ALD), .asdata(AD), .ena(EN), .q(Q));
+
+endmodule
diff --git a/techlibs/intel_alm/cyclone10gx/quartus_rename.v b/techlibs/intel_alm/cyclone10gx/quartus_rename.v
new file mode 100644
index 000000000..3fbc508ed
--- /dev/null
+++ b/techlibs/intel_alm/cyclone10gx/quartus_rename.v
@@ -0,0 +1,54 @@
+module MISTRAL_ALUT6(input A, B, C, D, E, F, output Q);
+parameter LUT = 64'h0000_0000_0000_0000;
+
+cyclone10gx_lcell_comb #(.lut_mask(LUT)) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D), .datae(E), .dataf(F), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT5(input A, B, C, D, E, output Q);
+parameter LUT = 32'h0000_0000;
+
+cyclone10gx_lcell_comb #(.lut_mask({2{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D), .datae(E), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT4(input A, B, C, D, output Q);
+parameter LUT = 16'h0000;
+
+cyclone10gx_lcell_comb #(.lut_mask({4{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT3(input A, B, C, output Q);
+parameter LUT = 8'h00;
+
+cyclone10gx_lcell_comb #(.lut_mask({8{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT2(input A, B, output Q);
+parameter LUT = 4'h0;
+
+cyclone10gx_lcell_comb #(.lut_mask({16{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_NOT(input A, output Q);
+
+NOT _TECHMAP_REPLACE_ (.IN(A), .OUT(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT_ARITH(input A, B, C, D0, D1, CI, output SO, CO);
+parameter LUT0 = 16'h0000;
+parameter LUT1 = 16'h0000;
+
+cyclone10gx_lcell_comb #(.lut_mask({16'h0, LUT1, 16'h0, LUT0})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D0), .dataf(D1), .cin(CI), .sumout(SO), .cout(CO));
+
+endmodule
diff --git a/techlibs/intel_alm/cyclonev/quartus_rename.v b/techlibs/intel_alm/cyclonev/quartus_rename.v
new file mode 100644
index 000000000..6eff375e1
--- /dev/null
+++ b/techlibs/intel_alm/cyclonev/quartus_rename.v
@@ -0,0 +1,54 @@
+module MISTRAL_ALUT6(input A, B, C, D, E, F, output Q);
+parameter LUT = 64'h0000_0000_0000_0000;
+
+cyclonev_lcell_comb #(.lut_mask(LUT)) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D), .datae(E), .dataf(F), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT5(input A, B, C, D, E, output Q);
+parameter LUT = 32'h0000_0000;
+
+cyclonev_lcell_comb #(.lut_mask({2{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D), .datae(E), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT4(input A, B, C, D, output Q);
+parameter LUT = 16'h0000;
+
+cyclonev_lcell_comb #(.lut_mask({4{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT3(input A, B, C, output Q);
+parameter LUT = 8'h00;
+
+cyclonev_lcell_comb #(.lut_mask({8{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT2(input A, B, output Q);
+parameter LUT = 4'h0;
+
+cyclonev_lcell_comb #(.lut_mask({16{LUT}})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .combout(Q));
+
+endmodule
+
+
+module MISTRAL_NOT(input A, output Q);
+
+NOT _TECHMAP_REPLACE_ (.IN(A), .OUT(Q));
+
+endmodule
+
+
+module MISTRAL_ALUT_ARITH(input A, B, C, D0, D1, CI, output SO, CO);
+parameter LUT0 = 16'h0000;
+parameter LUT1 = 16'h0000;
+
+cyclonev_lcell_comb #(.lut_mask({16'h0, LUT1, 16'h0, LUT0})) _TECHMAP_REPLACE_ (.dataa(A), .datab(B), .datac(C), .datad(D0), .dataf(D1), .cin(CI), .sumout(SO), .cout(CO));
+
+endmodule
diff --git a/techlibs/intel_alm/synth_intel_alm.cc b/techlibs/intel_alm/synth_intel_alm.cc
new file mode 100644
index 000000000..ee7cb361b
--- /dev/null
+++ b/techlibs/intel_alm/synth_intel_alm.cc
@@ -0,0 +1,240 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Claire Wolf <claire@symbioticeda.com>
+ *  Copyright (C) 2019  Dan Ravensloft <dan.ravensloft@gmail.com>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "kernel/celltypes.h"
+#include "kernel/log.h"
+#include "kernel/register.h"
+#include "kernel/rtlil.h"
+
+USING_YOSYS_NAMESPACE
+PRIVATE_NAMESPACE_BEGIN
+
+struct SynthIntelALMPass : public ScriptPass {
+	SynthIntelALMPass() : ScriptPass("synth_intel_alm", "synthesis for ALM-based Intel (Altera) FPGAs.") {}
+
+	void help() YS_OVERRIDE
+	{
+		//   |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
+		log("\n");
+		log("    synth_intel_alm [options]\n");
+		log("\n");
+		log("This command runs synthesis for ALM-based Intel FPGAs.\n");
+		log("\n");
+		log("    -top <module>\n");
+		log("        use the specified module as top module (default='top')\n");
+		log("\n");
+		log("    -family <family>\n");
+		log("        target one of:\n");
+		log("        \"cyclonev\"    - Cyclone V (default)\n");
+		log("        \"cyclone10gx\" - Cyclone 10GX\n");
+		log("\n");
+		log("    -quartus\n");
+		log("        output a netlist using Quartus cells instead of MISTRAL_* cells\n");
+		log("\n");
+		log("    -vqm <file>\n");
+		log("        write the design to the specified Verilog Quartus Mapping File. Writing of an\n");
+		log("        output file is omitted if this parameter is not specified. Implies -quartus.\n");
+		log("\n");
+		log("    -run <from_label>:<to_label>\n");
+		log("        only run the commands between the labels (see below). an empty\n");
+		log("        from label is synonymous to 'begin', and empty to label is\n");
+		log("        synonymous to the end of the command list.\n");
+		log("\n");
+		log("    -nolutram\n");
+		log("        do not use LUT RAM cells in output netlist\n");
+		log("\n");
+		log("    -nobram\n");
+		log("        do not use block RAM cells in output netlist\n");
+		log("\n");
+		log("    -noflatten\n");
+		log("        do not flatten design before synthesis\n");
+		log("\n");
+		log("The following commands are executed by this synthesis command:\n");
+		help_script();
+		log("\n");
+	}
+
+	string top_opt, family_opt, bram_type, vout_file;
+	bool flatten, quartus, nolutram, nobram;
+
+	void clear_flags() YS_OVERRIDE
+	{
+		top_opt = "-auto-top";
+		family_opt = "cyclonev";
+		bram_type = "m10k";
+		vout_file = "";
+		flatten = true;
+		quartus = false;
+		nolutram = false;
+		nobram = false;
+	}
+
+	void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
+	{
+		string run_from, run_to;
+		clear_flags();
+
+		size_t argidx;
+		for (argidx = 1; argidx < args.size(); argidx++) {
+			if (args[argidx] == "-family" && argidx + 1 < args.size()) {
+				family_opt = args[++argidx];
+				continue;
+			}
+			if (args[argidx] == "-top" && argidx + 1 < args.size()) {
+				top_opt = "-top " + args[++argidx];
+				continue;
+			}
+			if (args[argidx] == "-vqm" && argidx + 1 < args.size()) {
+				quartus = true;
+				vout_file = args[++argidx];
+				continue;
+			}
+			if (args[argidx] == "-run" && argidx + 1 < args.size()) {
+				size_t pos = args[argidx + 1].find(':');
+				if (pos == std::string::npos)
+					break;
+				run_from = args[++argidx].substr(0, pos);
+				run_to = args[argidx].substr(pos + 1);
+				continue;
+			}
+			if (args[argidx] == "-quartus") {
+				quartus = true;
+				continue;
+			}
+			if (args[argidx] == "-nolutram") {
+				nolutram = true;
+				continue;
+			}
+			if (args[argidx] == "-nobram") {
+				nobram = true;
+				continue;
+			}
+			if (args[argidx] == "-noflatten") {
+				flatten = false;
+				continue;
+			}
+			break;
+		}
+		extra_args(args, argidx, design);
+
+		if (!design->full_selection())
+			log_cmd_error("This command only operates on fully selected designs!\n");
+
+		if (family_opt == "cyclonev") {
+			bram_type = "m10k";
+		} else if (family_opt == "cyclone10gx") {
+			bram_type = "m20k";
+		} else {
+			log_cmd_error("Invalid family specified: '%s'\n", family_opt.c_str());
+		}
+
+		log_header(design, "Executing SYNTH_INTEL_ALM pass.\n");
+		log_push();
+
+		run_script(design, run_from, run_to);
+
+		log_pop();
+	}
+
+	void script() YS_OVERRIDE
+	{
+		if (help_mode) {
+			family_opt = "<family>";
+			bram_type = "<bram_type>";
+		}
+
+		if (check_label("begin")) {
+			run(stringf("read_verilog -sv -lib +/intel/%s/cells_sim.v", family_opt.c_str()));
+			run(stringf("read_verilog -specify -lib -D %s +/intel_alm/common/alm_sim.v", family_opt.c_str()));
+			run(stringf("read_verilog -specify -lib -D %s +/intel_alm/common/dff_sim.v", family_opt.c_str()));
+
+			// Misc and common cells
+			run("read_verilog -lib +/intel/common/altpll_bb.v");
+			run("read_verilog -lib +/intel_alm/common/megafunction_bb.v");
+			run(stringf("hierarchy -check %s", help_mode ? "-top <top>" : top_opt.c_str()));
+		}
+
+		if (flatten && check_label("flatten", "(unless -noflatten)")) {
+			run("proc");
+			run("flatten");
+			run("tribuf -logic");
+			run("deminout");
+		}
+
+		if (check_label("coarse")) {
+			run("synth -run coarse -lut 6");
+			run("techmap -map +/intel_alm/common/arith_alm_map.v");
+		}
+
+		if (!nobram && check_label("map_bram", "(skip if -nobram)")) {
+			run(stringf("memory_bram -rules +/intel_alm/common/bram_%s.txt", bram_type.c_str()));
+			run(stringf("techmap -map +/intel_alm/common/bram_%s_map.v", bram_type.c_str()));
+		}
+
+		if (!nolutram && check_label("map_lutram", "(skip if -nolutram)")) {
+			run("memory_bram -rules +/intel_alm/common/lutram_mlab.txt", "(for Cyclone V / Cyclone 10GX)");
+			run("techmap -map +/intel_alm/common/lutram_mlab_map.v", "(for Cyclone V / Cyclone 10GX)");
+		}
+
+		if (check_label("map_ffram")) {
+			run("memory_map");
+			run("opt -full");
+		}
+
+		if (check_label("map_ffs")) {
+			run("dff2dffe -direct-match $_DFF_*");
+			run("zinit");
+			run("techmap -map +/techmap.v -map +/intel_alm/common/dff_map.v");
+			run("opt -full -undriven -mux_undef");
+			run("clean -purge");
+		}
+
+		if (check_label("map_luts")) {
+			run("read_verilog -icells -specify -lib +/abc9_model.v");
+			run("abc9 -maxlut 6 -W 200");
+			run("techmap -map +/intel_alm/common/alm_map.v");
+			run("opt -fast");
+			run("autoname");
+			run("clean");
+		}
+
+		if (check_label("check")) {
+			run("hierarchy -check");
+			run("stat");
+			run("check");
+		}
+
+		if (check_label("quartus")) {
+			if (quartus || help_mode) {
+				run("hilomap -singleton -hicell __MISTRAL_VCC Q -locell __MISTRAL_GND Q");
+				run("techmap -map +/intel_alm/common/quartus_rename.v");
+				run(stringf("techmap -map +/intel_alm/%s/quartus_rename.v", family_opt.c_str()));
+			}
+		}
+
+		if (check_label("vqm")) {
+			if (!vout_file.empty() || help_mode) {
+				run(stringf("write_verilog -attr2comment -defparam -nohex -decimal %s", help_mode ? "<file-name>" : vout_file.c_str()));
+			}
+		}
+	}
+} SynthIntelALMPass;
+
+PRIVATE_NAMESPACE_END
diff --git a/tests/arch/intel_alm/add_sub.ys b/tests/arch/intel_alm/add_sub.ys
new file mode 100644
index 000000000..4cb2c2e0d
--- /dev/null
+++ b/tests/arch/intel_alm/add_sub.ys
@@ -0,0 +1,8 @@
+read_verilog ../common/add_sub.v
+hierarchy -top top
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+stat
+select -assert-count 8 t:MISTRAL_ALUT_ARITH
+select -assert-none t:MISTRAL_ALUT_ARITH %% t:* %D
diff --git a/tests/arch/intel_alm/adffs.ys b/tests/arch/intel_alm/adffs.ys
new file mode 100644
index 000000000..5d8d3a220
--- /dev/null
+++ b/tests/arch/intel_alm/adffs.ys
@@ -0,0 +1,48 @@
+read_verilog ../common/adffs.v
+design -save read
+
+hierarchy -top adff
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd adff # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+select -assert-count 1 t:MISTRAL_NOT
+
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
+
+
+design -load read
+hierarchy -top adffn
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd adffn # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+
+select -assert-none t:MISTRAL_FF %% t:* %D
+
+
+design -load read
+hierarchy -top dffs
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffs # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+select -assert-count 1 t:MISTRAL_ALUT2
+
+select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 %% t:* %D
+
+
+design -load read
+hierarchy -top ndffnr
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd ndffnr # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+select -assert-count 1 t:MISTRAL_NOT
+select -assert-count 1 t:MISTRAL_ALUT2
+
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT t:MISTRAL_ALUT2 %% t:* %D
diff --git a/tests/arch/intel_alm/counter.ys b/tests/arch/intel_alm/counter.ys
new file mode 100644
index 000000000..945c318d8
--- /dev/null
+++ b/tests/arch/intel_alm/counter.ys
@@ -0,0 +1,13 @@
+read_verilog ../common/counter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -async2sync -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 2 t:MISTRAL_NOT
+select -assert-count 8 t:MISTRAL_ALUT_ARITH
+select -assert-count 8 t:MISTRAL_FF
+
+select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT_ARITH t:MISTRAL_FF %% t:* %D
diff --git a/tests/arch/intel_alm/dffs.ys b/tests/arch/intel_alm/dffs.ys
new file mode 100644
index 000000000..cf29ad8e0
--- /dev/null
+++ b/tests/arch/intel_alm/dffs.ys
@@ -0,0 +1,22 @@
+read_verilog ../common/dffs.v
+design -save read
+
+hierarchy -top dff
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dff # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+
+select -assert-none t:MISTRAL_FF %% t:* %D
+
+design -load read
+hierarchy -top dffe
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffe # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+select -assert-count 1 t:MISTRAL_ALUT3
+
+select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT3 %% t:* %D
diff --git a/tests/arch/intel_alm/fsm.ys b/tests/arch/intel_alm/fsm.ys
new file mode 100644
index 000000000..8bb0ebab2
--- /dev/null
+++ b/tests/arch/intel_alm/fsm.ys
@@ -0,0 +1,18 @@
+read_verilog ../common/fsm.v
+hierarchy -top fsm
+proc
+flatten
+
+equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev
+async2sync
+miter -equiv -make_assert -flatten gold gate miter
+sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
+
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd fsm # Constrain all select calls below inside the top module
+
+select -assert-count 6 t:MISTRAL_FF
+select -assert-max 2 t:MISTRAL_ALUT2 # Clang returns 2, GCC returns 1
+select -assert-count 5 t:MISTRAL_ALUT5
+select -assert-count 1 t:MISTRAL_ALUT6
+select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
diff --git a/tests/arch/intel_alm/logic.ys b/tests/arch/intel_alm/logic.ys
new file mode 100644
index 000000000..fad45db74
--- /dev/null
+++ b/tests/arch/intel_alm/logic.ys
@@ -0,0 +1,11 @@
+read_verilog ../common/logic.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:MISTRAL_NOT
+select -assert-count 6 t:MISTRAL_ALUT2
+select -assert-count 2 t:MISTRAL_ALUT4
+select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT2 t:MISTRAL_ALUT4 %% t:* %D
diff --git a/tests/arch/intel_alm/mux.ys b/tests/arch/intel_alm/mux.ys
new file mode 100644
index 000000000..308e45268
--- /dev/null
+++ b/tests/arch/intel_alm/mux.ys
@@ -0,0 +1,45 @@
+read_verilog ../common/mux.v
+design -save read
+
+hierarchy -top mux2
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT3
+
+select -assert-none t:MISTRAL_ALUT3 %% t:* %D
+
+design -load read
+hierarchy -top mux4
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux4 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT6
+
+select -assert-none t:MISTRAL_ALUT6 %% t:* %D
+
+design -load read
+hierarchy -top mux8
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux8 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT3
+select -assert-count 1 t:MISTRAL_ALUT5
+select -assert-count 2 t:MISTRAL_ALUT6
+
+select -assert-none t:MISTRAL_ALUT3 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
+
+design -load read
+hierarchy -top mux16
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux16 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT3
+select -assert-count 2 t:MISTRAL_ALUT5
+select -assert-count 4 t:MISTRAL_ALUT6
+
+select -assert-none t:MISTRAL_ALUT3 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
diff --git a/tests/arch/intel_alm/run-test.sh b/tests/arch/intel_alm/run-test.sh
new file mode 100755
index 000000000..bf19b887d
--- /dev/null
+++ b/tests/arch/intel_alm/run-test.sh
@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+set -e
+{
+echo "all::"
+for x in *.ys; do
+	echo "all:: run-$x"
+	echo "run-$x:"
+	echo "	@echo 'Running $x..'"
+	echo "	@../../../yosys -ql ${x%.ys}.log -w 'Yosys has only limited support for tri-state logic at the moment.' $x"
+done
+for s in *.sh; do
+	if [ "$s" != "run-test.sh" ]; then
+		echo "all:: run-$s"
+		echo "run-$s:"
+		echo "	@echo 'Running $s..'"
+		echo "	@bash $s"
+	fi
+done
+} > run-test.mk
+exec ${MAKE:-make} -f run-test.mk
diff --git a/tests/arch/intel_alm/shifter.ys b/tests/arch/intel_alm/shifter.ys
new file mode 100644
index 000000000..014dbd1a8
--- /dev/null
+++ b/tests/arch/intel_alm/shifter.ys
@@ -0,0 +1,10 @@
+read_verilog ../common/shifter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 8 t:MISTRAL_FF
+
+select -assert-none t:MISTRAL_FF %% t:* %D
diff --git a/tests/arch/intel_alm/tribuf.ys b/tests/arch/intel_alm/tribuf.ys
new file mode 100644
index 000000000..71b05a747
--- /dev/null
+++ b/tests/arch/intel_alm/tribuf.ys
@@ -0,0 +1,13 @@
+read_verilog ../common/tribuf.v
+hierarchy -top tristate
+proc
+tribuf
+flatten
+synth
+equiv_opt -assert -map +/simcells.v synth_intel_alm -family cyclonev # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd tristate # Constrain all select calls below inside the top module
+#Internal cell type used. Need support it.
+select -assert-count 1 t:$_TBUF_
+
+select -assert-none t:$_TBUF_ %% t:* %D