diff --git a/Makefile b/Makefile
index 2cac80f0f..742692f0d 100644
--- a/Makefile
+++ b/Makefile
@@ -710,6 +710,7 @@ test: $(TARGETS) $(EXTRA_TARGETS)
 	+cd tests/aiger && bash run-test.sh $(ABCOPT)
 	+cd tests/arch && bash run-test.sh
 	+cd tests/ice40 && bash run-test.sh $(SEEDOPT)
+	+cd tests/anlogic && bash run-test.sh $(SEEDOPT)
 	@echo ""
 	@echo "  Passed \"make test\"."
 	@echo ""
diff --git a/tests/anlogic/.gitignore b/tests/anlogic/.gitignore
new file mode 100644
index 000000000..9a71dca69
--- /dev/null
+++ b/tests/anlogic/.gitignore
@@ -0,0 +1,4 @@
+*.log
+/run-test.mk
++*_synth.v
++*_testbench
diff --git a/tests/anlogic/add_sub.v b/tests/anlogic/add_sub.v
new file mode 100644
index 000000000..177c32e30
--- /dev/null
+++ b/tests/anlogic/add_sub.v
@@ -0,0 +1,13 @@
+module top
+(
+ input [3:0] x,
+ input [3:0] y,
+
+ output [3:0] A,
+ output [3:0] B
+ );
+
+assign A =  x + y;
+assign B =  x - y;
+
+endmodule
diff --git a/tests/anlogic/add_sub.ys b/tests/anlogic/add_sub.ys
new file mode 100644
index 000000000..55c090506
--- /dev/null
+++ b/tests/anlogic/add_sub.ys
@@ -0,0 +1,9 @@
+read_verilog add_sub.v
+hierarchy -top top
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 10 t:AL_MAP_ADDER
+select -assert-count 4 t:AL_MAP_LUT1
+select -assert-none t:AL_MAP_LUT1 t:AL_MAP_ADDER %% t:* %D
+
diff --git a/tests/anlogic/alu.v b/tests/anlogic/alu.v
new file mode 100644
index 000000000..f82cc2e21
--- /dev/null
+++ b/tests/anlogic/alu.v
@@ -0,0 +1,19 @@
+module top (
+	input clock,
+	input [31:0] dinA, dinB,
+	input [2:0] opcode,
+	output reg [31:0] dout
+);
+	always @(posedge clock) begin
+		case (opcode)
+		0: dout <= dinA + dinB;
+		1: dout <= dinA - dinB;
+		2: dout <= dinA >> dinB;
+		3: dout <= $signed(dinA) >>> dinB;
+		4: dout <= dinA << dinB;
+		5: dout <= dinA & dinB;
+		6: dout <= dinA | dinB;
+		7: dout <= dinA ^ dinB;
+		endcase
+	end
+endmodule
diff --git a/tests/anlogic/alu.ys b/tests/anlogic/alu.ys
new file mode 100644
index 000000000..532ce82d5
--- /dev/null
+++ b/tests/anlogic/alu.ys
@@ -0,0 +1,17 @@
+read_verilog alu.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 66 t:AL_MAP_ADDER
+select -assert-count 32 t:AL_MAP_LUT1
+select -assert-count 23 t:AL_MAP_LUT2
+select -assert-count 61 t:AL_MAP_LUT3
+select -assert-count 209 t:AL_MAP_LUT4
+select -assert-count 100 t:AL_MAP_LUT5
+select -assert-count 79 t:AL_MAP_LUT6
+select -assert-count 32 t:AL_MAP_SEQ
+select -assert-none t:AL_MAP_ADDER t:AL_MAP_LUT1 t:AL_MAP_LUT2 t:AL_MAP_LUT3 t:AL_MAP_LUT4 t:AL_MAP_LUT5 t:AL_MAP_LUT6 t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/anlogic/counter.v b/tests/anlogic/counter.v
new file mode 100644
index 000000000..52852f8ac
--- /dev/null
+++ b/tests/anlogic/counter.v
@@ -0,0 +1,17 @@
+module top    (
+out,
+clk,
+reset
+);
+    output [7:0] out;
+    input clk, reset;
+    reg [7:0] out;
+
+    always @(posedge clk, posedge reset)
+		if (reset) begin
+			out <= 8'b0 ;
+		end else
+			out <= out + 1;
+
+
+endmodule
diff --git a/tests/anlogic/counter.ys b/tests/anlogic/counter.ys
new file mode 100644
index 000000000..5210221e3
--- /dev/null
+++ b/tests/anlogic/counter.ys
@@ -0,0 +1,11 @@
+read_verilog counter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 9 t:AL_MAP_ADDER
+select -assert-count 8 t:AL_MAP_SEQ
+select -assert-none t:SB_CARRY t:AL_MAP_SEQ t:AL_MAP_ADDER %% t:* %D
diff --git a/tests/anlogic/dffs.v b/tests/anlogic/dffs.v
new file mode 100644
index 000000000..d97840c43
--- /dev/null
+++ b/tests/anlogic/dffs.v
@@ -0,0 +1,37 @@
+module dff
+    ( input d, clk, output reg q );
+	always @( posedge clk )
+            q <= d;
+endmodule
+
+module dffe
+    ( input d, clk, en, output reg q );
+    initial begin
+      q = 0;
+    end
+	always @( posedge clk )
+		if ( en )
+			q <= d;
+endmodule
+
+module top (
+input clk,
+input en,
+input a,
+output b,b1,
+);
+
+dff u_dff (
+        .clk (clk ),
+        .d (a ),
+        .q (b )
+    );
+
+dffe u_ndffe (
+        .clk (clk ),
+        .en (en),
+        .d (a ),
+        .q (b1 )
+    );
+
+endmodule
diff --git a/tests/anlogic/dffs.ys b/tests/anlogic/dffs.ys
new file mode 100644
index 000000000..a15c6f24e
--- /dev/null
+++ b/tests/anlogic/dffs.ys
@@ -0,0 +1,10 @@
+read_verilog dffs.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT3
+select -assert-count 2 t:AL_MAP_SEQ
+select -assert-none t:AL_MAP_LUT3 t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/anlogic/fsm.v b/tests/anlogic/fsm.v
new file mode 100644
index 000000000..0605bd102
--- /dev/null
+++ b/tests/anlogic/fsm.v
@@ -0,0 +1,73 @@
+ module fsm (
+ clock,
+ reset,
+ req_0,
+ req_1,
+ gnt_0,
+ gnt_1
+ );
+ input   clock,reset,req_0,req_1;
+ output  gnt_0,gnt_1;
+ wire    clock,reset,req_0,req_1;
+ reg     gnt_0,gnt_1;
+
+ parameter SIZE = 3           ;
+ parameter IDLE  = 3'b001,GNT0 = 3'b010,GNT1 = 3'b100,GNT2 = 3'b101 ;
+
+ reg [SIZE-1:0] state;
+ reg [SIZE-1:0] next_state;
+
+ always @ (posedge clock)
+ begin : FSM
+ if (reset == 1'b1) begin
+   state <=  #1  IDLE;
+   gnt_0 <= 0;
+   gnt_1 <= 0;
+ end else
+  case(state)
+    IDLE : if (req_0 == 1'b1) begin
+                 state <=  #1  GNT0;
+                 gnt_0 <= 1;
+               end else if (req_1 == 1'b1) begin
+                 gnt_1 <= 1;
+                 state <=  #1  GNT0;
+               end else begin
+                 state <=  #1  IDLE;
+               end
+    GNT0 : if (req_0 == 1'b1) begin
+                 state <=  #1  GNT0;
+               end else begin
+                 gnt_0 <= 0;
+                 state <=  #1  IDLE;
+               end
+    GNT1 : if (req_1 == 1'b1) begin
+                 state <=  #1  GNT2;
+				 gnt_1 <= req_0;
+               end
+    GNT2 : if (req_0 == 1'b1) begin
+                 state <=  #1  GNT1;
+				 gnt_1 <= req_1;
+               end
+    default : state <=  #1  IDLE;
+ endcase
+ end
+
+ endmodule
+
+ module top (
+input clk,
+input rst,
+input a,
+input b,
+output g0,
+output g1
+);
+
+fsm u_fsm ( .clock(clk),
+            .reset(rst),
+            .req_0(a),
+            .req_1(b),
+            .gnt_0(g0),
+            .gnt_1(g1));
+
+endmodule
diff --git a/tests/anlogic/fsm.ys b/tests/anlogic/fsm.ys
new file mode 100644
index 000000000..6eb7b9a71
--- /dev/null
+++ b/tests/anlogic/fsm.ys
@@ -0,0 +1,14 @@
+read_verilog fsm.v
+hierarchy -top top
+proc
+flatten
+#ERROR: Found 4 unproven $equiv cells in 'equiv_status -assert'.
+#equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+equiv_opt -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 1 t:AL_MAP_LUT2
+select -assert-count 5 t:AL_MAP_LUT5
+select -assert-count 1 t:AL_MAP_LUT6
+select -assert-count 6 t:AL_MAP_SEQ
+select -assert-none t:AL_MAP_LUT2 t:AL_MAP_LUT5 t:AL_MAP_LUT6 t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/anlogic/latches.v b/tests/anlogic/latches.v
new file mode 100644
index 000000000..9dc43e4c2
--- /dev/null
+++ b/tests/anlogic/latches.v
@@ -0,0 +1,58 @@
+module latchp
+    ( input d, clk, en, output reg q );
+	always @*
+		if ( en )
+			q <= d;
+endmodule
+
+module latchn
+    ( input d, clk, en, output reg q );
+	always @*
+		if ( !en )
+			q <= d;
+endmodule
+
+module latchsr
+    ( input d, clk, en, clr, pre, output reg q );
+	always @*
+		if ( clr )
+			q <= 1'b0;
+		else if ( pre )
+			q <= 1'b1;
+		else if ( en )
+			q <= d;
+endmodule
+
+
+module top (
+input clk,
+input clr,
+input pre,
+input a,
+output b,b1,b2
+);
+
+
+latchp u_latchp (
+        .en (clk ),
+        .d (a ),
+        .q (b )
+    );
+
+
+latchn u_latchn (
+        .en (clk ),
+        .d (a ),
+        .q (b1 )
+    );
+
+
+latchsr u_latchsr (
+        .en (clk ),
+        .clr (clr),
+        .pre (pre),
+        .d (a ),
+        .q (b2 )
+    );
+
+endmodule
diff --git a/tests/anlogic/latches.ys b/tests/anlogic/latches.ys
new file mode 100644
index 000000000..b5e52cf16
--- /dev/null
+++ b/tests/anlogic/latches.ys
@@ -0,0 +1,16 @@
+read_verilog latches.v
+design -save read
+
+proc
+async2sync # converts latches to a 'sync' variant clocked by a 'super'-clock
+flatten
+synth_anlogic
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+
+design -load read
+synth_anlogic
+cd top
+select -assert-count 2 t:AL_MAP_LUT3
+select -assert-count 1 t:AL_MAP_LUT5
+select -assert-none t:AL_MAP_LUT3 t:AL_MAP_LUT5 %% t:* %D
diff --git a/tests/anlogic/memory.v b/tests/anlogic/memory.v
new file mode 100644
index 000000000..cb7753f7b
--- /dev/null
+++ b/tests/anlogic/memory.v
@@ -0,0 +1,21 @@
+module top
+(
+	input [7:0] data_a,
+	input [6:1] addr_a,
+	input we_a, clk,
+	output reg [7:0] q_a
+);
+	// Declare the RAM variable
+	reg [7:0] ram[63:0];
+
+	// Port A
+	always @ (posedge clk)
+	begin
+		if (we_a)
+		begin
+			ram[addr_a] <= data_a;
+			q_a <= data_a;
+		end
+		q_a <= ram[addr_a];
+	end
+endmodule
diff --git a/tests/anlogic/memory.ys b/tests/anlogic/memory.ys
new file mode 100644
index 000000000..8c0ce844e
--- /dev/null
+++ b/tests/anlogic/memory.ys
@@ -0,0 +1,21 @@
+read_verilog memory.v
+hierarchy -top top
+proc
+memory -nomap
+equiv_opt -run :prove -map +/anlogic/cells_sim.v synth_anlogic
+memory
+opt -full
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+#ERROR: Failed to import cell gate.mem.0.0.0 (type EG_LOGIC_DRAM16X4) to SAT database.
+#sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter
+
+design -load postopt
+cd top
+
+select -assert-count 8  t:AL_MAP_LUT2
+select -assert-count 8  t:AL_MAP_LUT4
+select -assert-count 8   t:AL_MAP_LUT5
+select -assert-count 36 t:AL_MAP_SEQ
+select -assert-count 8  t:EG_LOGIC_DRAM16X4 #Why not AL_LOGIC_BRAM?
+select -assert-none t:AL_MAP_LUT2 t:AL_MAP_LUT4 t:AL_MAP_LUT5 t:AL_MAP_SEQ t:EG_LOGIC_DRAM16X4 %% t:* %D
diff --git a/tests/anlogic/mux.v b/tests/anlogic/mux.v
new file mode 100644
index 000000000..0814b733e
--- /dev/null
+++ b/tests/anlogic/mux.v
@@ -0,0 +1,100 @@
+module mux2 (S,A,B,Y);
+    input S;
+    input A,B;
+    output reg Y;
+
+    always @(*)
+		Y = (S)? B : A;
+endmodule
+
+module mux4 ( S, D, Y );
+
+input[1:0] S;
+input[3:0] D;
+output Y;
+
+reg Y;
+wire[1:0] S;
+wire[3:0] D;
+
+always @*
+begin
+    case( S )
+       0 : Y = D[0];
+       1 : Y = D[1];
+       2 : Y = D[2];
+       3 : Y = D[3];
+   endcase
+end
+
+endmodule
+
+module mux8 ( S, D, Y );
+
+input[2:0] S;
+input[7:0] D;
+output Y;
+
+reg Y;
+wire[2:0] S;
+wire[7:0] D;
+
+always @*
+begin
+   case( S )
+       0 : Y = D[0];
+       1 : Y = D[1];
+       2 : Y = D[2];
+       3 : Y = D[3];
+       4 : Y = D[4];
+       5 : Y = D[5];
+       6 : Y = D[6];
+       7 : Y = D[7];
+   endcase
+end
+
+endmodule
+
+module mux16 (D, S, Y);
+ 	input  [15:0] D;
+ 	input  [3:0] S;
+ 	output Y;
+
+assign Y = D[S];
+
+endmodule
+
+
+module top (
+input [3:0] S,
+input [15:0] D,
+output M2,M4,M8,M16
+);
+
+mux2 u_mux2 (
+        .S (S[0]),
+        .A (D[0]),
+        .B (D[1]),
+        .Y (M2)
+    );
+
+
+mux4 u_mux4 (
+        .S (S[1:0]),
+        .D (D[3:0]),
+        .Y (M4)
+    );
+
+mux8 u_mux8 (
+        .S (S[2:0]),
+        .D (D[7:0]),
+        .Y (M8)
+    );
+
+mux16 u_mux16 (
+        .S (S[3:0]),
+        .D (D[15:0]),
+        .Y (M16)
+    );
+
+endmodule
diff --git a/tests/anlogic/mux.ys b/tests/anlogic/mux.ys
new file mode 100644
index 000000000..84a8bcccf
--- /dev/null
+++ b/tests/anlogic/mux.ys
@@ -0,0 +1,12 @@
+read_verilog mux.v
+proc
+flatten
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1  t:AL_MAP_LUT3
+select -assert-count 4  t:AL_MAP_LUT4
+select -assert-count 4  t:AL_MAP_LUT5
+select -assert-count 1  t:AL_MAP_LUT6
+select -assert-none t:AL_MAP_LUT3 t:AL_MAP_LUT4 t:AL_MAP_LUT5 t:AL_MAP_LUT6 %% t:* %D
diff --git a/tests/anlogic/run-test.sh b/tests/anlogic/run-test.sh
new file mode 100755
index 000000000..2c72ca3a9
--- /dev/null
+++ b/tests/anlogic/run-test.sh
@@ -0,0 +1,20 @@
+#!/usr/bin/env bash
+set -e
+{
+echo "all::"
+for x in *.ys; do
+	echo "all:: run-$x"
+	echo "run-$x:"
+	echo "	@echo 'Running $x..'"
+	echo "	@../../yosys -ql ${x%.ys}.log $x -w 'Yosys has only limited support for tri-state logic at the moment.'"
+done
+for s in *.sh; do
+	if [ "$s" != "run-test.sh" ]; then
+		echo "all:: run-$s"
+		echo "run-$s:"
+		echo "	@echo 'Running $s..'"
+		echo "	@bash $s"
+	fi
+done
+} > run-test.mk
+exec ${MAKE:-make} -f run-test.mk
diff --git a/tests/anlogic/shifter.v b/tests/anlogic/shifter.v
new file mode 100644
index 000000000..c55632552
--- /dev/null
+++ b/tests/anlogic/shifter.v
@@ -0,0 +1,22 @@
+module top    (
+out,
+clk,
+in
+);
+    output [7:0] out;
+    input signed clk, in;
+    reg signed [7:0] out = 0;
+
+    always @(posedge clk)
+	begin
+`ifndef BUG
+		out    <= out >> 1;
+		out[7] <= in;
+`else
+
+		out    <= out << 1;
+		out[7] <= in;
+`endif
+	end
+
+endmodule
diff --git a/tests/anlogic/shifter.ys b/tests/anlogic/shifter.ys
new file mode 100644
index 000000000..edd89b344
--- /dev/null
+++ b/tests/anlogic/shifter.ys
@@ -0,0 +1,9 @@
+read_verilog shifter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -assert -map +/anlogic/cells_sim.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 8 t:AL_MAP_SEQ
+select -assert-none t:AL_MAP_SEQ %% t:* %D
diff --git a/tests/anlogic/tribuf.v b/tests/anlogic/tribuf.v
new file mode 100644
index 000000000..870a02584
--- /dev/null
+++ b/tests/anlogic/tribuf.v
@@ -0,0 +1,23 @@
+module tristate (en, i, o);
+    input en;
+    input i;
+    output o;
+
+	assign o = en ? i : 1'bz;
+
+endmodule
+
+
+module top (
+input en,
+input a,
+output b
+);
+
+tristate u_tri (
+        .en (en ),
+        .i (a ),
+        .o (b )
+    );
+
+endmodule
diff --git a/tests/anlogic/tribuf.ys b/tests/anlogic/tribuf.ys
new file mode 100644
index 000000000..663e93fb2
--- /dev/null
+++ b/tests/anlogic/tribuf.ys
@@ -0,0 +1,9 @@
+read_verilog tribuf.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -assert -map +/anlogic/cells_sim.v -map +/simcells.v synth_anlogic # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 1 t:$_TBUF_
+select -assert-none t:$_TBUF_ %% t:* %D