Improve igloo2 exmaple

Signed-off-by: Clifford Wolf <clifford@clifford.at>

examples/igloo2/example.pdc

@@ -1 +1,8 @@
 # Add placement constraints here
+set_io clk  -pinname H16 -fixed yes -DIRECTION INPUT
+set_io SW1  -pinname H12 -fixed yes -DIRECTION INPUT
+set_io SW2  -pinname H13 -fixed yes -DIRECTION INPUT
+set_io LED1 -pinname J16 -fixed yes -DIRECTION OUTPUT
+set_io LED2 -pinname M16 -fixed yes -DIRECTION OUTPUT
+set_io LED3 -pinname K16 -fixed yes -DIRECTION OUTPUT
+set_io LED4 -pinname N16 -fixed yes -DIRECTION OUTPUT

examples/igloo2/example.sdc

@@ -1 +1,2 @@
 # Add timing constraints here
+create_clock -period 10.000 -waveform {0.000 5.000} [get_ports {clk}]

examples/igloo2/example.v

@@ -1,23 +1,23 @@
 module example (
 	input  clk,
-	input  EN,
+	input  SW1,
+	input  SW2,
 	output LED1,
 	output LED2,
 	output LED3,
-	output LED4,
-	output LED5
+	output LED4
 );
 
-	localparam BITS = 5;
+	localparam BITS = 4;
 	localparam LOG2DELAY = 22;
 
 	reg [BITS+LOG2DELAY-1:0] counter = 0;
 	reg [BITS-1:0] outcnt;
 
 	always @(posedge clk) begin
-		counter <= counter + EN;
+		counter <= counter + SW1 + SW2 + 1;
 		outcnt <= counter >> LOG2DELAY;
 	end
 
-	assign {LED1, LED2, LED3, LED4, LED5} = outcnt ^ (outcnt >> 1);
+	assign {LED1, LED2, LED3, LED4} = outcnt ^ (outcnt >> 1);
 endmodule

examples/igloo2/libero.tcl

@@ -8,8 +8,8 @@ new_project \
     -block_mode 0 \
     -hdl "VERILOG" \
     -family IGLOO2 \
-    -die PA4MGL500 \
-    -package tq144 \
+    -die PA4MGL2500 \
+    -package vf256 \
     -speed -1
 
 import_files -hdl_source {netlist.vm}