Merge remote-tracking branch 'origin/master' into xaig_dff

CHANGELOG

@@ -43,6 +43,12 @@ Yosys 0.9 .. Yosys 0.9-dev
     - Added "-match-init" option to "dff2dffs" pass
     - Added "techmap_autopurge" support to techmap
     - Added "add -mod <modname[s]>"
+    - Added +/mul2dsp.v for decomposing wide multipliers to custom-sized ones
+    - Added "ice40_dsp" for Lattice iCE40 DSP packing
+    - Added "xilinx_dsp" for Xilinx DSP packing
+    - "synth_xilinx" to now infer DSP blocks (-nodsp to disable)
+    - "synth_ecp5" to now infer DSP blocks (-nodsp to disable, experimental)
+    - "synth_ice40 -dsp" to infer DSP blocks
 
 Yosys 0.8 .. Yosys 0.9
 ----------------------

backends/aiger/xaiger.cc

@@ -419,6 +419,8 @@ struct XAigerWriter
 				if (!box_module || !box_module->attributes.count("\\abc_box_id"))
 					continue;
 
+				bool blackbox = box_module->get_blackbox_attribute(true /* ignore_wb */);
+
 				// Fully pad all unused input connections of this box cell with S0
 				// Fully pad all undriven output connections of this box cell with anonymous wires
 				// NB: Assume box_module->ports are sorted alphabetically
@@ -463,7 +465,10 @@ struct XAigerWriter
 							rhs = it->second;
 						}
 						else {
-							rhs = module->addWire(NEW_ID, GetSize(w));
+							Wire *wire = module->addWire(NEW_ID, GetSize(w));
+							if (blackbox)
+								wire->set_bool_attribute(ID(abc_padding));
+							rhs = wire;
 							cell->setPort(port_name, rhs);
 						}
 
@@ -474,12 +479,7 @@ struct XAigerWriter
 							if (O != b)
 								alias_map[O] = b;
 							undriven_bits.erase(O);
-
+							input_bits.erase(b);
-							auto jt = input_bits.find(b);
-							if (jt != input_bits.end()) {
-								log_assert(keep_bits.count(O));
-								input_bits.erase(b);
-							}
 						}
 					}
 				}
@@ -521,7 +521,7 @@ struct XAigerWriter
 			// inherit existing inout's drivers
 			if ((wire->port_input && wire->port_output && !undriven_bits.count(bit))
 					|| keep_bits.count(bit)) {
-				RTLIL::IdString wire_name = wire->name.str() + "$inout.out";
+				RTLIL::IdString wire_name = stringf("$%s$inout.out", wire->name.c_str());
 				RTLIL::Wire *new_wire = module->wire(wire_name);
 				if (!new_wire)
 					new_wire = module->addWire(wire_name, GetSize(wire));

frontends/aiger/aigerparse.cc

@@ -902,7 +902,7 @@ void AigerReader::post_process()
 					if (!existing) {
 						if (escaped_s.ends_with("$inout.out")) {
 							wire->port_output = false;
-							RTLIL::Wire *in_wire = module->wire(escaped_s.substr(0, escaped_s.size()-10));
+							RTLIL::Wire *in_wire = module->wire(escaped_s.substr(1, escaped_s.size()-11));
 							log_assert(in_wire);
 							log_assert(in_wire->port_input && !in_wire->port_output);
 							in_wire->port_output = true;
@@ -923,7 +923,7 @@ void AigerReader::post_process()
 					if (!existing) {
 						if (escaped_s.ends_with("$inout.out")) {
 							wire->port_output = false;
-							RTLIL::Wire *in_wire = module->wire(stringf("%s[%d]", escaped_s.substr(0, escaped_s.size()-10).c_str(), index));
+							RTLIL::Wire *in_wire = module->wire(stringf("%s[%d]", escaped_s.substr(1, escaped_s.size()-11).c_str(), index));
 							log_assert(in_wire);
 							log_assert(in_wire->port_input && !in_wire->port_output);
 							in_wire->port_output = true;

kernel/rtlil.cc

@@ -3083,6 +3083,7 @@ void RTLIL::SigSpec::replace(const dict<RTLIL::SigBit, RTLIL::SigBit> &rules, RT
 	log_assert(other != NULL);
 	log_assert(width_ == other->width_);
 
+	if (rules.empty()) return;
 	unpack();
 	other->unpack();
 
@@ -3107,6 +3108,7 @@ void RTLIL::SigSpec::replace(const std::map<RTLIL::SigBit, RTLIL::SigBit> &rules
 	log_assert(other != NULL);
 	log_assert(width_ == other->width_);
 
+	if (rules.empty()) return;
 	unpack();
 	other->unpack();
 

passes/pmgen/Makefile.inc

@@ -21,6 +21,14 @@ $(eval $(call add_extra_objs,passes/pmgen/ice40_wrapcarry_pm.h))
 
 # --------------------------------------
 
+OBJS += passes/pmgen/xilinx_dsp.o
+passes/pmgen/xilinx_dsp.o: passes/pmgen/xilinx_dsp_pm.h passes/pmgen/xilinx_dsp_CREG_pm.h passes/pmgen/xilinx_dsp_cascade_pm.h
+$(eval $(call add_extra_objs,passes/pmgen/xilinx_dsp_pm.h))
+$(eval $(call add_extra_objs,passes/pmgen/xilinx_dsp_CREG_pm.h))
+$(eval $(call add_extra_objs,passes/pmgen/xilinx_dsp_cascade_pm.h))
+
+# --------------------------------------
+
 OBJS += passes/pmgen/peepopt.o
 passes/pmgen/peepopt.o: passes/pmgen/peepopt_pm.h
 $(eval $(call add_extra_objs,passes/pmgen/peepopt_pm.h))

passes/pmgen/ice40_dsp.cc

@@ -29,19 +29,19 @@ void create_ice40_dsp(ice40_dsp_pm &pm)
 {
 	auto &st = pm.st_ice40_dsp;
 
-#if 0
-	log("\n");
-	log("ffA:   %s\n", log_id(st.ffA, "--"));
-	log("ffB:   %s\n", log_id(st.ffB, "--"));
-	log("mul:   %s\n", log_id(st.mul, "--"));
-	log("ffY:   %s\n", log_id(st.ffY, "--"));
-	log("addAB: %s\n", log_id(st.addAB, "--"));
-	log("muxAB: %s\n", log_id(st.muxAB, "--"));
-	log("ffS:   %s\n", log_id(st.ffS, "--"));
-#endif
-
 	log("Checking %s.%s for iCE40 DSP inference.\n", log_id(pm.module), log_id(st.mul));
 
+	log_debug("ffA:    %s %s %s\n", log_id(st.ffA, "--"), log_id(st.ffAholdmux, "--"), log_id(st.ffArstmux, "--"));
+	log_debug("ffB:    %s %s %s\n", log_id(st.ffB, "--"), log_id(st.ffBholdmux, "--"), log_id(st.ffBrstmux, "--"));
+	log_debug("ffCD:   %s %s\n", log_id(st.ffCD, "--"), log_id(st.ffCDholdmux, "--"));
+	log_debug("mul:    %s\n", log_id(st.mul, "--"));
+	log_debug("ffFJKG: %s\n", log_id(st.ffFJKG, "--"));
+	log_debug("ffH:    %s\n", log_id(st.ffH, "--"));
+	log_debug("add:    %s\n", log_id(st.add, "--"));
+	log_debug("mux:    %s\n", log_id(st.mux, "--"));
+	log_debug("ffO:    %s %s %s\n", log_id(st.ffO, "--"), log_id(st.ffOholdmux, "--"), log_id(st.ffOrstmux, "--"));
+	log_debug("\n");
+
 	if (GetSize(st.sigA) > 16) {
 		log("  input A (%s) is too large (%d > 16).\n", log_signal(st.sigA), GetSize(st.sigA));
 		return;
@@ -52,59 +52,85 @@ void create_ice40_dsp(ice40_dsp_pm &pm)
 		return;
 	}
 
-	if (GetSize(st.sigS) > 32) {
+	if (GetSize(st.sigO) > 33) {
-		log("  accumulator (%s) is too large (%d > 32).\n", log_signal(st.sigS), GetSize(st.sigS));
+		log("  adder/accumulator (%s) is too large (%d > 33).\n", log_signal(st.sigO), GetSize(st.sigO));
 		return;
 	}
 
-	if (GetSize(st.sigY) > 32) {
+	if (GetSize(st.sigH) > 32) {
-		log("  output (%s) is too large (%d > 32).\n", log_signal(st.sigY), GetSize(st.sigY));
+		log("  output (%s) is too large (%d > 32).\n", log_signal(st.sigH), GetSize(st.sigH));
 		return;
 	}
 
-	bool mul_signed = st.mul->getParam("\\A_SIGNED").as_bool();
+	Cell *cell = st.mul;
+	if (cell->type == ID($mul)) {
+		log("  replacing %s with SB_MAC16 cell.\n", log_id(st.mul->type));
 
-	log("  replacing $mul with SB_MAC16 cell.\n");
+		cell = pm.module->addCell(NEW_ID, ID(SB_MAC16));
-
+		pm.module->swap_names(cell, st.mul);
-	Cell *cell = pm.module->addCell(NEW_ID, "\\SB_MAC16");
+	}
-	pm.module->swap_names(cell, st.mul);
+	else log_assert(cell->type == ID(SB_MAC16));
 
 	// SB_MAC16 Input Interface
-
 	SigSpec A = st.sigA;
-	A.extend_u0(16, mul_signed);
+	A.extend_u0(16, st.mul->getParam(ID(A_SIGNED)).as_bool());
+	log_assert(GetSize(A) == 16);
 
 	SigSpec B = st.sigB;
-	B.extend_u0(16, mul_signed);
+	B.extend_u0(16, st.mul->getParam(ID(B_SIGNED)).as_bool());
+	log_assert(GetSize(B) == 16);
 
-	SigSpec CD;
+	SigSpec CD = st.sigCD;
-	if (st.muxA)
+	if (CD.empty())
-		CD = st.muxA->getPort("\\B");
+		CD = RTLIL::Const(0, 32);
-	if (st.muxB)
+	else
-		CD = st.muxB->getPort("\\A");
+		log_assert(GetSize(CD) == 32);
-	CD.extend_u0(32, mul_signed);
 
-	cell->setPort("\\A", A);
+	cell->setPort(ID::A, A);
-	cell->setPort("\\B", B);
+	cell->setPort(ID::B, B);
-	cell->setPort("\\C", CD.extract(0, 16));
+	cell->setPort(ID(C), CD.extract(16, 16));
-	cell->setPort("\\D", CD.extract(16, 16));
+	cell->setPort(ID(D), CD.extract(0, 16));
 
-	cell->setParam("\\A_REG", st.ffA ? State::S1 : State::S0);
+	cell->setParam(ID(A_REG), st.ffA ? State::S1 : State::S0);
-	cell->setParam("\\B_REG", st.ffB ? State::S1 : State::S0);
+	cell->setParam(ID(B_REG), st.ffB ? State::S1 : State::S0);
+	cell->setParam(ID(C_REG), st.ffCD ? State::S1 : State::S0);
+	cell->setParam(ID(D_REG), st.ffCD ? State::S1 : State::S0);
 
-	cell->setPort("\\AHOLD", State::S0);
+	SigSpec AHOLD, BHOLD, CDHOLD;
-	cell->setPort("\\BHOLD", State::S0);
+	if (st.ffAholdmux)
-	cell->setPort("\\CHOLD", State::S0);
+		AHOLD = st.ffAholdpol ? st.ffAholdmux->getPort(ID(S)) : pm.module->Not(NEW_ID, st.ffAholdmux->getPort(ID(S)));
-	cell->setPort("\\DHOLD", State::S0);
+	else
+		AHOLD = State::S0;
+	if (st.ffBholdmux)
+		BHOLD = st.ffBholdpol ? st.ffBholdmux->getPort(ID(S)) : pm.module->Not(NEW_ID, st.ffBholdmux->getPort(ID(S)));
+	else
+		BHOLD = State::S0;
+	if (st.ffCDholdmux)
+		CDHOLD = st.ffCDholdpol ? st.ffCDholdmux->getPort(ID(S)) : pm.module->Not(NEW_ID, st.ffCDholdmux->getPort(ID(S)));
+	else
+		CDHOLD = State::S0;
+	cell->setPort(ID(AHOLD), AHOLD);
+	cell->setPort(ID(BHOLD), BHOLD);
+	cell->setPort(ID(CHOLD), CDHOLD);
+	cell->setPort(ID(DHOLD), CDHOLD);
 
-	cell->setPort("\\IRSTTOP", State::S0);
+	SigSpec IRSTTOP, IRSTBOT;
-	cell->setPort("\\IRSTBOT", State::S0);
+	if (st.ffArstmux)
+		IRSTTOP = st.ffArstpol ? st.ffArstmux->getPort(ID(S)) : pm.module->Not(NEW_ID, st.ffArstmux->getPort(ID(S)));
+	else
+		IRSTTOP = State::S0;
+	if (st.ffBrstmux)
+		IRSTBOT = st.ffBrstpol ? st.ffBrstmux->getPort(ID(S)) : pm.module->Not(NEW_ID, st.ffBrstmux->getPort(ID(S)));
+	else
+		IRSTBOT = State::S0;
+	cell->setPort(ID(IRSTTOP), IRSTTOP);
+	cell->setPort(ID(IRSTBOT), IRSTBOT);
 
-	if (st.clock_vld)
+	if (st.clock != SigBit())
 	{
-		cell->setPort("\\CLK", st.clock);
+		cell->setPort(ID(CLK), st.clock);
-		cell->setPort("\\CE", State::S1);
+		cell->setPort(ID(CE), State::S1);
-		cell->setParam("\\NEG_TRIGGER", st.clock_pol ? State::S0 : State::S1);
+		cell->setParam(ID(NEG_TRIGGER), st.clock_pol ? State::S0 : State::S1);
 
 		log("  clock: %s (%s)", log_signal(st.clock), st.clock_pol ? "posedge" : "negedge");
 
@@ -114,91 +140,137 @@ void create_ice40_dsp(ice40_dsp_pm &pm)
 		if (st.ffB)
 			log(" ffB:%s", log_id(st.ffB));
 
-		if (st.ffY)
+		if (st.ffCD)
-			log(" ffY:%s", log_id(st.ffY));
+			log(" ffCD:%s", log_id(st.ffCD));
 
-		if (st.ffS)
+		if (st.ffFJKG)
-			log(" ffS:%s", log_id(st.ffS));
+			log(" ffFJKG:%s", log_id(st.ffFJKG));
+
+		if (st.ffH)
+			log(" ffH:%s", log_id(st.ffH));
+
+		if (st.ffO)
+			log(" ffO:%s", log_id(st.ffO));
 
 		log("\n");
 	}
 	else
 	{
-		cell->setPort("\\CLK", State::S0);
+		cell->setPort(ID(CLK), State::S0);
-		cell->setPort("\\CE", State::S0);
+		cell->setPort(ID(CE), State::S0);
-		cell->setParam("\\NEG_TRIGGER", State::S0);
+		cell->setParam(ID(NEG_TRIGGER), State::S0);
 	}
 
 	// SB_MAC16 Cascade Interface
 
-	cell->setPort("\\SIGNEXTIN", State::Sx);
+	cell->setPort(ID(SIGNEXTIN), State::Sx);
-	cell->setPort("\\SIGNEXTOUT", pm.module->addWire(NEW_ID));
+	cell->setPort(ID(SIGNEXTOUT), pm.module->addWire(NEW_ID));
 
-	cell->setPort("\\CI", State::Sx);
+	cell->setPort(ID(CI), State::Sx);
-	cell->setPort("\\CO", pm.module->addWire(NEW_ID));
 
-	cell->setPort("\\ACCUMCI", State::Sx);
+	cell->setPort(ID(ACCUMCI), State::Sx);
-	cell->setPort("\\ACCUMCO", pm.module->addWire(NEW_ID));
+	cell->setPort(ID(ACCUMCO), pm.module->addWire(NEW_ID));
 
 	// SB_MAC16 Output Interface
 
-	SigSpec O = st.ffS ? st.sigS : st.sigY;
+	SigSpec O = st.sigO;
+	int O_width = GetSize(O);
+	if (O_width == 33) {
+		log_assert(st.add);
+		// If we have a signed multiply-add, then perform sign extension
+		if (st.add->getParam(ID(A_SIGNED)).as_bool() && st.add->getParam(ID(B_SIGNED)).as_bool())
+			pm.module->connect(O[32], O[31]);
+		else
+			cell->setPort(ID(CO), O[32]);
+		O.remove(O_width-1);
+	}
+	else
+		cell->setPort(ID(CO), pm.module->addWire(NEW_ID));
+	log_assert(GetSize(O) <= 32);
 	if (GetSize(O) < 32)
 		O.append(pm.module->addWire(NEW_ID, 32-GetSize(O)));
 
-	cell->setPort("\\O", O);
+	cell->setPort(ID(O), O);
 
-	if (st.addAB) {
+	bool accum = false;
-		log("  accumulator %s (%s)\n", log_id(st.addAB), log_id(st.addAB->type));
+	if (st.add) {
-		cell->setPort("\\ADDSUBTOP", st.addAB->type == "$add" ? State::S0 : State::S1);
+		accum = (st.ffO && st.add->getPort(st.addAB == ID::A ? ID::B : ID::A) == st.sigO);
-		cell->setPort("\\ADDSUBBOT", st.addAB->type == "$add" ? State::S0 : State::S1);
+		if (accum)
+			log("  accumulator %s (%s)\n", log_id(st.add), log_id(st.add->type));
+		else
+			log("  adder %s (%s)\n", log_id(st.add), log_id(st.add->type));
+		cell->setPort(ID(ADDSUBTOP), st.add->type == ID($add) ? State::S0 : State::S1);
+		cell->setPort(ID(ADDSUBBOT), st.add->type == ID($add) ? State::S0 : State::S1);
 	} else {
-		cell->setPort("\\ADDSUBTOP", State::S0);
+		cell->setPort(ID(ADDSUBTOP), State::S0);
-		cell->setPort("\\ADDSUBBOT", State::S0);
+		cell->setPort(ID(ADDSUBBOT), State::S0);
 	}
 
-	cell->setPort("\\ORSTTOP", State::S0);
+	SigSpec OHOLD;
-	cell->setPort("\\ORSTBOT", State::S0);
+	if (st.ffOholdmux)
+		OHOLD = st.ffOholdpol ? st.ffOholdmux->getPort(ID(S)) : pm.module->Not(NEW_ID, st.ffOholdmux->getPort(ID(S)));
+	else
+		OHOLD = State::S0;
+	cell->setPort(ID(OHOLDTOP), OHOLD);
+	cell->setPort(ID(OHOLDBOT), OHOLD);
 
-	cell->setPort("\\OHOLDTOP", State::S0);
+	SigSpec ORST;
-	cell->setPort("\\OHOLDBOT", State::S0);
+	if (st.ffOrstmux)
+		ORST = st.ffOrstpol ? st.ffOrstmux->getPort(ID(S)) : pm.module->Not(NEW_ID, st.ffOrstmux->getPort(ID(S)));
+	else
+		ORST = State::S0;
+	cell->setPort(ID(ORSTTOP), ORST);
+	cell->setPort(ID(ORSTBOT), ORST);
 
 	SigSpec acc_reset = State::S0;
-	if (st.muxA)
+	if (st.mux) {
-		acc_reset = st.muxA->getPort("\\S");
+		if (st.muxAB == ID::A)
-	if (st.muxB)
+			acc_reset = st.mux->getPort(ID(S));
-		acc_reset = pm.module->Not(NEW_ID, st.muxB->getPort("\\S"));
+		else
-
+			acc_reset = pm.module->Not(NEW_ID, st.mux->getPort(ID(S)));
-	cell->setPort("\\OLOADTOP", acc_reset);
+	}
-	cell->setPort("\\OLOADBOT", acc_reset);
+	cell->setPort(ID(OLOADTOP), acc_reset);
+	cell->setPort(ID(OLOADBOT), acc_reset);
 
 	// SB_MAC16 Remaining Parameters
 
-	cell->setParam("\\C_REG", State::S0);
+	cell->setParam(ID(TOP_8x8_MULT_REG), st.ffFJKG ? State::S1 : State::S0);
-	cell->setParam("\\D_REG", State::S0);
+	cell->setParam(ID(BOT_8x8_MULT_REG), st.ffFJKG ? State::S1 : State::S0);
+	cell->setParam(ID(PIPELINE_16x16_MULT_REG1), st.ffFJKG ? State::S1 : State::S0);
+	cell->setParam(ID(PIPELINE_16x16_MULT_REG2), st.ffH ? State::S1 : State::S0);
 
-	cell->setParam("\\TOP_8x8_MULT_REG", st.ffY ? State::S1 : State::S0);
+	cell->setParam(ID(TOPADDSUB_LOWERINPUT), Const(2, 2));
-	cell->setParam("\\BOT_8x8_MULT_REG", st.ffY ? State::S1 : State::S0);
+	cell->setParam(ID(TOPADDSUB_UPPERINPUT), accum ? State::S0 : State::S1);
-	cell->setParam("\\PIPELINE_16x16_MULT_REG1", st.ffY ? State::S1 : State::S0);
+	cell->setParam(ID(TOPADDSUB_CARRYSELECT), Const(3, 2));
-	cell->setParam("\\PIPELINE_16x16_MULT_REG2", State::S0);
 
-	cell->setParam("\\TOPOUTPUT_SELECT", Const(st.ffS ? 1 : 3, 2));
+	cell->setParam(ID(BOTADDSUB_LOWERINPUT), Const(2, 2));
-	cell->setParam("\\TOPADDSUB_LOWERINPUT", Const(2, 2));
+	cell->setParam(ID(BOTADDSUB_UPPERINPUT), accum ? State::S0 : State::S1);
-	cell->setParam("\\TOPADDSUB_UPPERINPUT", State::S0);
+	cell->setParam(ID(BOTADDSUB_CARRYSELECT), Const(0, 2));
-	cell->setParam("\\TOPADDSUB_CARRYSELECT", Const(3, 2));
 
-	cell->setParam("\\BOTOUTPUT_SELECT", Const(st.ffS ? 1 : 3, 2));
+	cell->setParam(ID(MODE_8x8), State::S0);
-	cell->setParam("\\BOTADDSUB_LOWERINPUT", Const(2, 2));
+	cell->setParam(ID(A_SIGNED), st.mul->getParam(ID(A_SIGNED)).as_bool());
-	cell->setParam("\\BOTADDSUB_UPPERINPUT", State::S0);
+	cell->setParam(ID(B_SIGNED), st.mul->getParam(ID(B_SIGNED)).as_bool());
-	cell->setParam("\\BOTADDSUB_CARRYSELECT", Const(0, 2));
 
-	cell->setParam("\\MODE_8x8", State::S0);
+	if (st.ffO) {
-	cell->setParam("\\A_SIGNED", mul_signed ? State::S1 : State::S0);
+		if (st.o_lo)
-	cell->setParam("\\B_SIGNED", mul_signed ? State::S1 : State::S0);
+			cell->setParam(ID(TOPOUTPUT_SELECT), Const(st.add ? 0 : 3, 2));
+		else
+			cell->setParam(ID(TOPOUTPUT_SELECT), Const(1, 2));
 
-	pm.autoremove(st.mul);
+		st.ffO->connections_.at(ID(Q)).replace(O, pm.module->addWire(NEW_ID, GetSize(O)));
-	pm.autoremove(st.ffY);
+		cell->setParam(ID(BOTOUTPUT_SELECT), Const(1, 2));
-	pm.autoremove(st.ffS);
+	}
+	else {
+		cell->setParam(ID(TOPOUTPUT_SELECT), Const(st.add ? 0 : 3, 2));
+		cell->setParam(ID(BOTOUTPUT_SELECT), Const(st.add ? 0 : 3, 2));
+	}
+
+	if (cell != st.mul)
+		pm.autoremove(st.mul);
+	else
+		pm.blacklist(st.mul);
+	pm.autoremove(st.ffFJKG);
+	pm.autoremove(st.add);
 }
 
 struct Ice40DspPass : public Pass {
@@ -209,7 +281,17 @@ struct Ice40DspPass : public Pass {
 		log("\n");
 		log("    ice40_dsp [options] [selection]\n");
 		log("\n");
-		log("Map multipliers and multiply-accumulate blocks to iCE40 DSP resources.\n");
+		log("Map multipliers ($mul/SB_MAC16) and multiply-accumulate ($mul/SB_MAC16 + $add)\n");
+		log("cells into iCE40 DSP resources.\n");
+		log("Currently, only the 16x16 multiply mode is supported and not the 2 x 8x8 mode.\n");
+		log("\n");
+		log("Pack input registers (A, B, {C,D}; with optional hold), pipeline registers\n");
+		log("({F,J,K,G}, H), output registers (O -- full 32-bits or lower 16-bits only; with\n");
+		log("optional hold), and post-adder into into the SB_MAC16 resource.\n");
+		log("\n");
+		log("Multiply-accumulate operations using the post-adder with feedback on the {C,D}\n");
+		log("input will be folded into the DSP. In this scenario only, resetting the\n");
+		log("the accumulator to an arbitrary value can be inferred to use the {C,D} input.\n");
 		log("\n");
 	}
 	void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE

passes/pmgen/ice40_dsp.pmg

@@ -1,163 +1,574 @@
 pattern ice40_dsp
 
 state <SigBit> clock
-state <bool> clock_pol clock_vld
+state <bool> clock_pol cd_signed o_lo
-state <SigSpec> sigA sigB sigY sigS
+state <SigSpec> sigA sigB sigCD sigH sigO
-state <Cell*> addAB muxAB
+state <Cell*> add mux
+state <IdString> addAB muxAB
+
+state <bool> ffAholdpol ffBholdpol ffCDholdpol ffOholdpol
+state <bool> ffArstpol ffBrstpol ffCDrstpol ffOrstpol
+
+state <Cell*> ffA ffAholdmux ffArstmux ffB ffBholdmux ffBrstmux ffCD ffCDholdmux
+state <Cell*> ffFJKG ffH ffO ffOholdmux ffOrstmux
+
+// subpattern
+state <SigSpec> argQ argD
+state <bool> ffholdpol ffrstpol
+state <int> ffoffset
+udata <SigSpec> dffD dffQ
+udata <SigBit> dffclock
+udata <Cell*> dff dffholdmux dffrstmux
+udata <bool> dffholdpol dffrstpol dffclock_pol
 
 match mul
-	select mul->type.in($mul)
+	select mul->type.in($mul, \SB_MAC16)
 	select GetSize(mul->getPort(\A)) + GetSize(mul->getPort(\B)) > 10
-	select GetSize(mul->getPort(\Y)) > 10
 endmatch
 
-match ffA
+code sigA sigB sigH
-	select ffA->type.in($dff)
+	auto unextend = [](const SigSpec &sig) {
-	// select nusers(port(ffA, \Q)) == 2
+		int i;
-	index <SigSpec> port(ffA, \Q) === port(mul, \A)
+		for (i = GetSize(sig)-1; i > 0; i--)
-	optional
+			if (sig[i] != sig[i-1])
-endmatch
+				break;
+		// Do not remove non-const sign bit
+		if (sig[i].wire)
+			++i;
+		return sig.extract(0, i);
+	};
+	sigA = unextend(port(mul, \A));
+	sigB = unextend(port(mul, \B));
 
-code sigA clock clock_pol clock_vld
+	SigSpec O;
-	sigA = port(mul, \A);
+	if (mul->type == $mul)
+		O = mul->getPort(\Y);
+	else if (mul->type == \SB_MAC16)
+		O = mul->getPort(\O);
+	else log_abort();
+	if (GetSize(O) <= 10)
+		reject;
 
-	if (ffA) {
+	// Only care about those bits that are used
-		sigA = port(ffA, \D);
+	int i;
+	for (i = 0; i < GetSize(O); i++) {
+		if (nusers(O[i]) <= 1)
+			break;
+		sigH.append(O[i]);
+	}
+	log_assert(nusers(O.extract_end(i)) <= 1);
+endcode
 
-		clock = port(ffA, \CLK).as_bit();
+code argQ ffA ffAholdmux ffArstmux ffAholdpol ffArstpol sigA clock clock_pol
-		clock_pol = param(ffA, \CLK_POLARITY).as_bool();
+	if (mul->type != \SB_MAC16 || !param(mul, \A_REG).as_bool()) {
-		clock_vld = true;
+		argQ = sigA;
+		subpattern(in_dffe);
+		if (dff) {
+			ffA = dff;
+			clock = dffclock;
+			clock_pol = dffclock_pol;
+			if (dffrstmux) {
+				ffArstmux = dffrstmux;
+				ffArstpol = dffrstpol;
+			}
+			if (dffholdmux) {
+				ffAholdmux = dffholdmux;
+				ffAholdpol = dffholdpol;
+			}
+			sigA = dffD;
+		}
 	}
 endcode
 
-match ffB
+code argQ ffB ffBholdmux ffBrstmux ffBholdpol ffBrstpol sigB clock clock_pol
-	select ffB->type.in($dff)
+	if (mul->type != \SB_MAC16 || !param(mul, \B_REG).as_bool()) {
-	// select nusers(port(ffB, \Q)) == 2
+		argQ = sigB;
-	index <SigSpec> port(ffB, \Q) === port(mul, \B)
+		subpattern(in_dffe);
-	optional
+		if (dff) {
-endmatch
+			ffB = dff;
-
+			clock = dffclock;
-code sigB clock clock_pol clock_vld
+			clock_pol = dffclock_pol;
-	sigB = port(mul, \B);
+			if (dffrstmux) {
-
+				ffBrstmux = dffrstmux;
-	if (ffB) {
+				ffBrstpol = dffrstpol;
-		sigB = port(ffB, \D);
+			}
-		SigBit c = port(ffB, \CLK).as_bit();
+			if (dffholdmux) {
-		bool cp = param(ffB, \CLK_POLARITY).as_bool();
+				ffBholdmux = dffholdmux;
-
+				ffBholdpol = dffholdpol;
-		if (clock_vld && (c != clock || cp != clock_pol))
+			}
-			reject;
+			sigB = dffD;
-
+		}
-		clock = c;
-		clock_pol = cp;
-		clock_vld = true;
 	}
 endcode
 
-match ffY
+code argD ffFJKG sigH clock clock_pol
-	select ffY->type.in($dff)
+	if (nusers(sigH) == 2 &&
-	select nusers(port(ffY, \D)) == 2
+			(mul->type != \SB_MAC16 ||
-	index <SigSpec> port(ffY, \D) === port(mul, \Y)
+			 (!param(mul, \TOP_8x8_MULT_REG).as_bool() && !param(mul, \BOT_8x8_MULT_REG).as_bool() && !param(mul, \PIPELINE_16x16_MULT_REG1).as_bool() && !param(mul, \PIPELINE_16x16_MULT_REG1).as_bool()))) {
-	optional
+		argD = sigH;
-endmatch
+		subpattern(out_dffe);
+		if (dff) {
+			// F/J/K/G do not have a CE-like (hold) input
+			if (dffholdmux)
+				goto reject_ffFJKG;
 
-code sigY clock clock_pol clock_vld
+			// Reset signal of F/J (IRSTTOP) and K/G (IRSTBOT)
-	sigY = port(mul, \Y);
+			//   shared with A and B
+			if ((ffArstmux != NULL) != (dffrstmux != NULL))
+				goto reject_ffFJKG;
+			if ((ffBrstmux != NULL) != (dffrstmux != NULL))
+				goto reject_ffFJKG;
+			if (ffArstmux) {
+				if (port(ffArstmux, \S) != port(dffrstmux, \S))
+					goto reject_ffFJKG;
+				if (ffArstpol != dffrstpol)
+					goto reject_ffFJKG;
+			}
+			if (ffBrstmux) {
+				if (port(ffBrstmux, \S) != port(dffrstmux, \S))
+					goto reject_ffFJKG;
+				if (ffBrstpol != dffrstpol)
+					goto reject_ffFJKG;
+			}
 
-	if (ffY) {
+			ffFJKG = dff;
-		sigY = port(ffY, \Q);
+			clock = dffclock;
-		SigBit c = port(ffY, \CLK).as_bit();
+			clock_pol = dffclock_pol;
-		bool cp = param(ffY, \CLK_POLARITY).as_bool();
+			sigH = dffQ;
 
-		if (clock_vld && (c != clock || cp != clock_pol))
+reject_ffFJKG: 		;
-			reject;
+		}
-
-		clock = c;
-		clock_pol = cp;
-		clock_vld = true;
 	}
 endcode
 
-match addA
+code argD ffH sigH sigO clock clock_pol
-	select addA->type.in($add)
+	if (ffFJKG && nusers(sigH) == 2 &&
-	select nusers(port(addA, \A)) == 2
+			(mul->type != \SB_MAC16 || !param(mul, \PIPELINE_16x16_MULT_REG2).as_bool())) {
-	index <SigSpec> port(addA, \A) === sigY
+		argD = sigH;
+		subpattern(out_dffe);
+		if (dff) {
+			// H does not have a CE-like (hold) input
+			if (dffholdmux)
+				goto reject_ffH;
+
+			// Reset signal of H (IRSTBOT) shared with B
+			if ((ffBrstmux != NULL) != (dffrstmux != NULL))
+				goto reject_ffH;
+			if (ffBrstmux) {
+				if (port(ffBrstmux, \S) != port(dffrstmux, \S))
+					goto reject_ffH;
+				if (ffBrstpol != dffrstpol)
+					goto reject_ffH;
+			}
+
+			ffH = dff;
+			clock = dffclock;
+			clock_pol = dffclock_pol;
+			sigH = dffQ;
+
+reject_ffH:		;
+		}
+	}
+
+	sigO = sigH;
+endcode
+
+match add
+	if mul->type != \SB_MAC16 || (param(mul, \TOPOUTPUT_SELECT).as_int() == 3 && param(mul, \BOTOUTPUT_SELECT).as_int() == 3)
+
+	select add->type.in($add)
+	choice <IdString> AB {\A, \B}
+	select nusers(port(add, AB)) == 2
+
+	index <SigBit> port(add, AB)[0] === sigH[0]
+	filter GetSize(port(add, AB)) <= GetSize(sigH)
+	filter port(add, AB) == sigH.extract(0, GetSize(port(add, AB)))
+	filter nusers(sigH.extract_end(GetSize(port(add, AB)))) <= 1
+	set addAB AB
 	optional
 endmatch
 
-match addB
+code sigCD sigO cd_signed
-	if !addA
+	if (add) {
-	select addB->type.in($add, $sub)
+		sigCD = port(add, addAB == \A ? \B : \A);
-	select nusers(port(addB, \B)) == 2
+		cd_signed = param(add, addAB == \A ? \B_SIGNED : \A_SIGNED).as_bool();
-	index <SigSpec> port(addB, \B) === sigY
-	optional
-endmatch
 
-code addAB sigS
-	if (addA) {
-		addAB = addA;
-		sigS = port(addA, \B);
-	}
-	if (addB) {
-		addAB = addB;
-		sigS = port(addB, \A);
-	}
-	if (addAB) {
 		int natural_mul_width = GetSize(sigA) + GetSize(sigB);
-		int actual_mul_width = GetSize(sigY);
+		int actual_mul_width = GetSize(sigH);
-		int actual_acc_width = GetSize(sigS);
+		int actual_acc_width = GetSize(sigCD);
 
 		if ((actual_acc_width > actual_mul_width) && (natural_mul_width > actual_mul_width))
 			reject;
-		if ((actual_acc_width != actual_mul_width) && (param(mul, \A_SIGNED).as_bool() != param(addAB, \A_SIGNED).as_bool()))
+		// If accumulator, check adder width and signedness
+		if (sigCD == sigH && (actual_acc_width != actual_mul_width) && (param(mul, \A_SIGNED).as_bool() != param(add, \A_SIGNED).as_bool()))
 			reject;
+
+		sigO = port(add, \Y);
 	}
 endcode
 
-match muxA
+match mux
-	if addAB
+	select mux->type == $mux
-	select muxA->type.in($mux)
+	choice <IdString> AB {\A, \B}
-	select nusers(port(muxA, \A)) == 2
+	select nusers(port(mux, AB)) == 2
-	index <SigSpec> port(muxA, \A) === port(addAB, \Y)
+	index <SigSpec> port(mux, AB) === sigO
+	set muxAB AB
 	optional
 endmatch
 
-match muxB
+code sigO
-	if addAB
+	if (mux)
-	if !muxA
+		sigO = port(mux, \Y);
-	select muxB->type.in($mux)
-	select nusers(port(muxB, \B)) == 2
-	index <SigSpec> port(muxB, \B) === port(addAB, \Y)
-	optional
-endmatch
-
-code muxAB
-	muxAB = addAB;
-	if (muxA)
-		muxAB = muxA;
-	if (muxB)
-		muxAB = muxB;
 endcode
 
-match ffS
+code argD ffO ffOholdmux ffOrstmux ffOholdpol ffOrstpol sigO sigCD clock clock_pol cd_signed o_lo
-	if muxAB
+	if (mul->type != \SB_MAC16 ||
-	select ffS->type.in($dff)
+			// Ensure that register is not already used
-	select nusers(port(ffS, \D)) == 2
+			((param(mul, \TOPOUTPUT_SELECT, 0).as_int() != 1 && param(mul, \BOTOUTPUT_SELECT, 0).as_int() != 1) &&
-	index <SigSpec> port(ffS, \D) === port(muxAB, \Y)
+			 // Ensure that OLOADTOP/OLOADBOT is unused or zero
-	index <SigSpec> port(ffS, \Q) === sigS
+			 (port(mul, \OLOADTOP, State::S0).is_fully_zero() && port(mul, \OLOADBOT, State::S0).is_fully_zero()))) {
-endmatch
 
-code clock clock_pol clock_vld
+		dff = nullptr;
-	if (ffS) {
-		SigBit c = port(ffS, \CLK).as_bit();
-		bool cp = param(ffS, \CLK_POLARITY).as_bool();
 
-		if (clock_vld && (c != clock || cp != clock_pol))
+		// First try entire sigO
-			reject;
+		if (nusers(sigO) == 2) {
+			argD = sigO;
+			subpattern(out_dffe);
+		}
 
-		clock = c;
+		// Otherwise try just its least significant 16 bits
-		clock_pol = cp;
+		if (!dff && GetSize(sigO) > 16) {
-		clock_vld = true;
+			argD = sigO.extract(0, 16);
+			if (nusers(argD) == 2) {
+				subpattern(out_dffe);
+				o_lo = dff;
+			}
+		}
+
+		if (dff) {
+			ffO = dff;
+			clock = dffclock;
+			clock_pol = dffclock_pol;
+			if (dffrstmux) {
+				ffOrstmux = dffrstmux;
+				ffOrstpol = dffrstpol;
+			}
+			if (dffholdmux) {
+				ffOholdmux = dffholdmux;
+				ffOholdpol = dffholdpol;
+			}
+
+			sigO.replace(sigO.extract(0, GetSize(dffQ)), dffQ);
+		}
+
+		// Loading value into output register is not
+		//   supported unless using accumulator
+		if (mux) {
+			if (sigCD != sigO)
+				reject;
+			sigCD = port(mux, muxAB == \B ? \A : \B);
+
+			cd_signed = add && param(add, \A_SIGNED).as_bool() && param(add, \B_SIGNED).as_bool();
+		}
 	}
+endcode
+
+code argQ ffCD ffCDholdmux ffCDholdpol ffCDrstpol sigCD clock clock_pol
+	if (!sigCD.empty() && sigCD != sigO &&
+			(mul->type != \SB_MAC16 || (!param(mul, \C_REG).as_bool() && !param(mul, \D_REG).as_bool()))) {
+		argQ = sigCD;
+		subpattern(in_dffe);
+		if (dff) {
+			if (dffholdmux) {
+				ffCDholdmux = dffholdmux;
+				ffCDholdpol = dffholdpol;
+			}
+
+			// Reset signal of C (IRSTTOP) and D (IRSTBOT)
+			//   shared with A and B
+			if ((ffArstmux != NULL) != (dffrstmux != NULL))
+				goto reject_ffCD;
+			if ((ffBrstmux != NULL) != (dffrstmux != NULL))
+				goto reject_ffCD;
+			if (ffArstmux) {
+				if (port(ffArstmux, \S) != port(dffrstmux, \S))
+					goto reject_ffCD;
+				if (ffArstpol != dffrstpol)
+					goto reject_ffCD;
+			}
+			if (ffBrstmux) {
+				if (port(ffBrstmux, \S) != port(dffrstmux, \S))
+					goto reject_ffCD;
+				if (ffBrstpol != dffrstpol)
+					goto reject_ffCD;
+			}
+
+			ffCD = dff;
+			clock = dffclock;
+			clock_pol = dffclock_pol;
+			sigCD = dffD;
+
+reject_ffCD: 		;
+		}
+	}
+endcode
+
+code sigCD
+	sigCD.extend_u0(32, cd_signed);
+endcode
+
+code
 	accept;
 endcode
+
+// #######################
+
+subpattern in_dffe
+arg argD argQ clock clock_pol
+
+code
+	dff = nullptr;
+	for (auto c : argQ.chunks()) {
+		if (!c.wire)
+			reject;
+		if (c.wire->get_bool_attribute(\keep))
+			reject;
+		Const init = c.wire->attributes.at(\init, State::Sx);
+		if (!init.is_fully_undef() && !init.is_fully_zero())
+			reject;
+	}
+endcode
+
+match ff
+	select ff->type.in($dff)
+	// DSP48E1 does not support clock inversion
+	select param(ff, \CLK_POLARITY).as_bool()
+
+	slice offset GetSize(port(ff, \D))
+	index <SigBit> port(ff, \Q)[offset] === argQ[0]
+
+	// Check that the rest of argQ is present
+	filter GetSize(port(ff, \Q)) >= offset + GetSize(argQ)
+	filter port(ff, \Q).extract(offset, GetSize(argQ)) == argQ
+
+	set ffoffset offset
+endmatch
+
+code argQ argD
+{
+	if (clock != SigBit()) {
+		if (port(ff, \CLK) != clock)
+			reject;
+		if (param(ff, \CLK_POLARITY).as_bool() != clock_pol)
+			reject;
+	}
+
+	SigSpec Q = port(ff, \Q);
+	dff = ff;
+	dffclock = port(ff, \CLK);
+	dffclock_pol = param(ff, \CLK_POLARITY).as_bool();
+	dffD = argQ;
+	argD = port(ff, \D);
+	argQ = Q;
+	dffD.replace(argQ, argD);
+	// Only search for ffrstmux if dffD only
+	//   has two (ff, ffrstmux) users
+	if (nusers(dffD) > 2)
+		argD = SigSpec();
+}
+endcode
+
+match ffrstmux
+	if false /* TODO: ice40 resets are actually async */
+
+	if !argD.empty()
+	select ffrstmux->type.in($mux)
+	index <SigSpec> port(ffrstmux, \Y) === argD
+
+	choice <IdString> BA {\B, \A}
+	// DSP48E1 only supports reset to zero
+	select port(ffrstmux, BA).is_fully_zero()
+
+	define <bool> pol (BA == \B)
+	set ffrstpol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffrstmux) {
+		dffrstmux = ffrstmux;
+		dffrstpol = ffrstpol;
+		argD = port(ffrstmux, ffrstpol ? \A : \B);
+		dffD.replace(port(ffrstmux, \Y), argD);
+
+		// Only search for ffholdmux if argQ has at
+		//   least 3 users (ff, <upstream>, ffrstmux) and
+		//   dffD only has two (ff, ffrstmux)
+		if (!(nusers(argQ) >= 3 && nusers(dffD) == 2))
+			argD = SigSpec();
+	}
+	else
+		dffrstmux = nullptr;
+endcode
+
+match ffholdmux
+	if !argD.empty()
+	select ffholdmux->type.in($mux)
+	index <SigSpec> port(ffholdmux, \Y) === argD
+	choice <IdString> BA {\B, \A}
+	index <SigSpec> port(ffholdmux, BA) === argQ
+	define <bool> pol (BA == \B)
+	set ffholdpol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffholdmux) {
+		dffholdmux = ffholdmux;
+		dffholdpol = ffholdpol;
+		argD = port(ffholdmux, ffholdpol ? \A : \B);
+		dffD.replace(port(ffholdmux, \Y), argD);
+	}
+	else
+		dffholdmux = nullptr;
+endcode
+
+// #######################
+
+subpattern out_dffe
+arg argD argQ clock clock_pol
+
+code
+	dff = nullptr;
+	for (auto c : argD.chunks())
+		if (c.wire->get_bool_attribute(\keep))
+			reject;
+endcode
+
+match ffholdmux
+	select ffholdmux->type.in($mux)
+	// ffholdmux output must have two users: ffholdmux and ff.D
+	select nusers(port(ffholdmux, \Y)) == 2
+
+	choice <IdString> BA {\B, \A}
+	// keep-last-value net must have at least three users: ffholdmux, ff, downstream sink(s)
+	select nusers(port(ffholdmux, BA)) >= 3
+
+	slice offset GetSize(port(ffholdmux, \Y))
+	define <IdString> AB (BA == \B ? \A : \B)
+	index <SigBit> port(ffholdmux, AB)[offset] === argD[0]
+
+	// Check that the rest of argD is present
+	filter GetSize(port(ffholdmux, AB)) >= offset + GetSize(argD)
+	filter port(ffholdmux, AB).extract(offset, GetSize(argD)) == argD
+
+	set ffoffset offset
+	define <bool> pol (BA == \B)
+	set ffholdpol pol
+
+	semioptional
+endmatch
+
+code argD argQ
+	dffholdmux = ffholdmux;
+	if (ffholdmux) {
+		SigSpec AB = port(ffholdmux, ffholdpol ? \A : \B);
+		SigSpec Y = port(ffholdmux, \Y);
+		argQ = argD;
+		argD.replace(AB, Y);
+		argQ.replace(AB, port(ffholdmux, ffholdpol ? \B : \A));
+
+		dffholdmux = ffholdmux;
+		dffholdpol = ffholdpol;
+	}
+endcode
+
+match ffrstmux
+	if false /* TODO: ice40 resets are actually async */
+
+	select ffrstmux->type.in($mux)
+	// ffrstmux output must have two users: ffrstmux and ff.D
+	select nusers(port(ffrstmux, \Y)) == 2
+
+	choice <IdString> BA {\B, \A}
+	// DSP48E1 only supports reset to zero
+	select port(ffrstmux, BA).is_fully_zero()
+
+	slice offset GetSize(port(ffrstmux, \Y))
+	define <IdString> AB (BA == \B ? \A : \B)
+	index <SigBit> port(ffrstmux, AB)[offset] === argD[0]
+
+	// Check that offset is consistent
+	filter !ffholdmux || ffoffset == offset
+	// Check that the rest of argD is present
+	filter GetSize(port(ffrstmux, AB)) >= offset + GetSize(argD)
+	filter port(ffrstmux, AB).extract(offset, GetSize(argD)) == argD
+
+	set ffoffset offset
+	define <bool> pol (AB == \A)
+	set ffrstpol pol
+
+	semioptional
+endmatch
+
+code argD argQ
+	dffrstmux = ffrstmux;
+	if (ffrstmux) {
+		SigSpec AB = port(ffrstmux, ffrstpol ? \A : \B);
+		SigSpec Y = port(ffrstmux, \Y);
+		argD.replace(AB, Y);
+
+		dffrstmux = ffrstmux;
+		dffrstpol = ffrstpol;
+	}
+endcode
+
+match ff
+	select ff->type.in($dff)
+	// DSP48E1 does not support clock inversion
+	select param(ff, \CLK_POLARITY).as_bool()
+
+	slice offset GetSize(port(ff, \D))
+	index <SigBit> port(ff, \D)[offset] === argD[0]
+
+	// Check that offset is consistent
+	filter (!ffholdmux && !ffrstmux) || ffoffset == offset
+	// Check that the rest of argD is present
+	filter GetSize(port(ff, \D)) >= offset + GetSize(argD)
+	filter port(ff, \D).extract(offset, GetSize(argD)) == argD
+	// Check that FF.Q is connected to CE-mux
+	filter !ffholdmux || port(ff, \Q).extract(offset, GetSize(argQ)) == argQ
+
+	set ffoffset offset
+endmatch
+
+code argQ
+	if (ff) {
+		if (clock != SigBit()) {
+			if (port(ff, \CLK) != clock)
+				reject;
+			if (param(ff, \CLK_POLARITY).as_bool() != clock_pol)
+				reject;
+		}
+		SigSpec D = port(ff, \D);
+		SigSpec Q = port(ff, \Q);
+		if (!ffholdmux) {
+			argQ = argD;
+			argQ.replace(D, Q);
+		}
+
+		for (auto c : argQ.chunks()) {
+			Const init = c.wire->attributes.at(\init, State::Sx);
+			if (!init.is_fully_undef() && !init.is_fully_zero())
+				reject;
+		}
+
+		dff = ff;
+		dffQ = argQ;
+		dffclock = port(ff, \CLK);
+		dffclock_pol = param(ff, \CLK_POLARITY).as_bool();
+	}
+	// No enable/reset mux possible without flop
+	else if (dffholdmux || dffrstmux)
+		reject;
+endcode

passes/pmgen/pmgen.py

@@ -286,7 +286,7 @@ def process_pmgfile(f, filename):
                         block["gencode"].append(rewrite_cpp(l.rstrip()))
                     break
 
-                assert False
+                raise RuntimeError("'%s' statement not recognised on line %d" % (a[0], linenr))
 
             if block["optional"]:
                 assert not block["semioptional"]
@@ -305,7 +305,8 @@ def process_pmgfile(f, filename):
             block["states"] = set()
 
             for s in line.split()[1:]:
-                assert s in state_types[current_pattern]
+                if s not in state_types[current_pattern]:
+                    raise RuntimeError("'%s' not in state_types" % s)
                 block["states"].add(s)
 
             codetype = "code"
@@ -327,7 +328,7 @@ def process_pmgfile(f, filename):
             blocks.append(block)
             continue
 
-        assert False
+        raise RuntimeError("'%s' command not recognised" % cmd)
 
 for fn in pmgfiles:
     with open(fn, "r") as f:
@@ -452,11 +453,19 @@ with open(outfile, "w") as f:
     print("    return sigmap(cell->getPort(portname));", file=f)
     print("  }", file=f)
     print("", file=f)
+    print("  SigSpec port(Cell *cell, IdString portname, const SigSpec& defval) {", file=f)
+    print("    return sigmap(cell->connections_.at(portname, defval));", file=f)
+    print("  }", file=f)
+    print("", file=f)
 
     print("  Const param(Cell *cell, IdString paramname) {", file=f)
     print("    return cell->getParam(paramname);", file=f)
     print("  }", file=f)
     print("", file=f)
+    print("  Const param(Cell *cell, IdString paramname, const Const& defval) {", file=f)
+    print("    return cell->parameters.at(paramname, defval);", file=f)
+    print("  }", file=f)
+    print("", file=f)
 
     print("  int nusers(const SigSpec &sig) {", file=f)
     print("    pool<Cell*> users;", file=f)

passes/pmgen/xilinx_dsp.cc

@@ -0,0 +1,637 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *                2019  Eddie Hung    <eddie@fpgeh.com>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "kernel/yosys.h"
+#include "kernel/sigtools.h"
+
+USING_YOSYS_NAMESPACE
+PRIVATE_NAMESPACE_BEGIN
+
+#include "passes/pmgen/xilinx_dsp_pm.h"
+#include "passes/pmgen/xilinx_dsp_CREG_pm.h"
+#include "passes/pmgen/xilinx_dsp_cascade_pm.h"
+
+static Cell* addDsp(Module *module) {
+	Cell *cell = module->addCell(NEW_ID, ID(DSP48E1));
+	cell->setParam(ID(ACASCREG), 0);
+	cell->setParam(ID(ADREG), 0);
+	cell->setParam(ID(A_INPUT), Const("DIRECT"));
+	cell->setParam(ID(ALUMODEREG), 0);
+	cell->setParam(ID(AREG), 0);
+	cell->setParam(ID(BCASCREG), 0);
+	cell->setParam(ID(B_INPUT), Const("DIRECT"));
+	cell->setParam(ID(BREG), 0);
+	cell->setParam(ID(CARRYINREG), 0);
+	cell->setParam(ID(CARRYINSELREG), 0);
+	cell->setParam(ID(CREG), 0);
+	cell->setParam(ID(DREG), 0);
+	cell->setParam(ID(INMODEREG), 0);
+	cell->setParam(ID(MREG), 0);
+	cell->setParam(ID(OPMODEREG), 0);
+	cell->setParam(ID(PREG), 0);
+	cell->setParam(ID(USE_MULT), Const("NONE"));
+	cell->setParam(ID(USE_SIMD), Const("ONE48"));
+	cell->setParam(ID(USE_DPORT), Const("FALSE"));
+
+	cell->setPort(ID(D), Const(0, 25));
+	cell->setPort(ID(INMODE), Const(0, 5));
+	cell->setPort(ID(ALUMODE), Const(0, 4));
+	cell->setPort(ID(OPMODE), Const(0, 7));
+	cell->setPort(ID(CARRYINSEL), Const(0, 3));
+	cell->setPort(ID(ACIN), Const(0, 30));
+	cell->setPort(ID(BCIN), Const(0, 18));
+	cell->setPort(ID(PCIN), Const(0, 48));
+	cell->setPort(ID(CARRYIN), Const(0, 1));
+	return cell;
+}
+
+void xilinx_simd_pack(Module *module, const std::vector<Cell*> &selected_cells)
+{
+	std::deque<Cell*> simd12_add, simd12_sub;
+	std::deque<Cell*> simd24_add, simd24_sub;
+
+	for (auto cell : selected_cells) {
+		if (!cell->type.in(ID($add), ID($sub)))
+			continue;
+		SigSpec Y = cell->getPort(ID(Y));
+		if (!Y.is_chunk())
+			continue;
+		if (!Y.as_chunk().wire->get_strpool_attribute(ID(use_dsp)).count("simd"))
+			continue;
+		if (GetSize(Y) > 25)
+			continue;
+		SigSpec A = cell->getPort(ID(A));
+		SigSpec B = cell->getPort(ID(B));
+		if (GetSize(Y) <= 13) {
+			if (GetSize(A) > 12)
+				continue;
+			if (GetSize(B) > 12)
+				continue;
+			if (cell->type == ID($add))
+				simd12_add.push_back(cell);
+			else if (cell->type == ID($sub))
+				simd12_sub.push_back(cell);
+		}
+		else if (GetSize(Y) <= 25) {
+			if (GetSize(A) > 24)
+				continue;
+			if (GetSize(B) > 24)
+				continue;
+			if (cell->type == ID($add))
+				simd24_add.push_back(cell);
+			else if (cell->type == ID($sub))
+				simd24_sub.push_back(cell);
+		}
+		else
+			log_abort();
+	}
+
+	auto f12 = [module](SigSpec &AB, SigSpec &C, SigSpec &P, SigSpec &CARRYOUT, Cell *lane) {
+		SigSpec A = lane->getPort(ID(A));
+		SigSpec B = lane->getPort(ID(B));
+		SigSpec Y = lane->getPort(ID(Y));
+		A.extend_u0(12, lane->getParam(ID(A_SIGNED)).as_bool());
+		B.extend_u0(12, lane->getParam(ID(B_SIGNED)).as_bool());
+		AB.append(A);
+		C.append(B);
+		if (GetSize(Y) < 13)
+			Y.append(module->addWire(NEW_ID, 13-GetSize(Y)));
+		else
+			log_assert(GetSize(Y) == 13);
+		P.append(Y.extract(0, 12));
+		CARRYOUT.append(Y[12]);
+	};
+	auto g12 = [&f12,module](std::deque<Cell*> &simd12) {
+		while (simd12.size() > 1) {
+			SigSpec AB, C, P, CARRYOUT;
+
+			Cell *lane1 = simd12.front();
+			simd12.pop_front();
+			Cell *lane2 = simd12.front();
+			simd12.pop_front();
+			Cell *lane3 = nullptr;
+			Cell *lane4 = nullptr;
+
+			if (!simd12.empty()) {
+				lane3 = simd12.front();
+				simd12.pop_front();
+				if (!simd12.empty()) {
+					lane4 = simd12.front();
+					simd12.pop_front();
+				}
+			}
+
+			log("Analysing %s.%s for Xilinx DSP SIMD12 packing.\n", log_id(module), log_id(lane1));
+
+			Cell *cell = addDsp(module);
+			cell->setParam(ID(USE_SIMD), Const("FOUR12"));
+			// X = A:B
+			// Y = 0
+			// Z = C
+			cell->setPort(ID(OPMODE), Const::from_string("0110011"));
+
+			log_assert(lane1);
+			log_assert(lane2);
+			f12(AB, C, P, CARRYOUT, lane1);
+			f12(AB, C, P, CARRYOUT, lane2);
+			if (lane3) {
+				f12(AB, C, P, CARRYOUT, lane3);
+				if (lane4)
+					f12(AB, C, P, CARRYOUT, lane4);
+				else {
+					AB.append(Const(0, 12));
+					C.append(Const(0, 12));
+					P.append(module->addWire(NEW_ID, 12));
+					CARRYOUT.append(module->addWire(NEW_ID, 1));
+				}
+			}
+			else {
+				AB.append(Const(0, 24));
+				C.append(Const(0, 24));
+				P.append(module->addWire(NEW_ID, 24));
+				CARRYOUT.append(module->addWire(NEW_ID, 2));
+			}
+			log_assert(GetSize(AB) == 48);
+			log_assert(GetSize(C) == 48);
+			log_assert(GetSize(P) == 48);
+			log_assert(GetSize(CARRYOUT) == 4);
+			cell->setPort(ID(A), AB.extract(18, 30));
+			cell->setPort(ID(B), AB.extract(0, 18));
+			cell->setPort(ID(C), C);
+			cell->setPort(ID(P), P);
+			cell->setPort(ID(CARRYOUT), CARRYOUT);
+			if (lane1->type == ID($sub))
+				cell->setPort(ID(ALUMODE), Const::from_string("0011"));
+
+			module->remove(lane1);
+			module->remove(lane2);
+			if (lane3) module->remove(lane3);
+			if (lane4) module->remove(lane4);
+
+			module->design->select(module, cell);
+		}
+	};
+	g12(simd12_add);
+	g12(simd12_sub);
+
+	auto f24 = [module](SigSpec &AB, SigSpec &C, SigSpec &P, SigSpec &CARRYOUT, Cell *lane) {
+		SigSpec A = lane->getPort(ID(A));
+		SigSpec B = lane->getPort(ID(B));
+		SigSpec Y = lane->getPort(ID(Y));
+		A.extend_u0(24, lane->getParam(ID(A_SIGNED)).as_bool());
+		B.extend_u0(24, lane->getParam(ID(B_SIGNED)).as_bool());
+		C.append(A);
+		AB.append(B);
+		if (GetSize(Y) < 25)
+			Y.append(module->addWire(NEW_ID, 25-GetSize(Y)));
+		else
+			log_assert(GetSize(Y) == 25);
+		P.append(Y.extract(0, 24));
+		CARRYOUT.append(module->addWire(NEW_ID)); // TWO24 uses every other bit
+		CARRYOUT.append(Y[24]);
+	};
+	auto g24 = [&f24,module](std::deque<Cell*> &simd24) {
+		while (simd24.size() > 1) {
+			SigSpec AB;
+			SigSpec C;
+			SigSpec P;
+			SigSpec CARRYOUT;
+
+			Cell *lane1 = simd24.front();
+			simd24.pop_front();
+			Cell *lane2 = simd24.front();
+			simd24.pop_front();
+
+			log("Analysing %s.%s for Xilinx DSP SIMD24 packing.\n", log_id(module), log_id(lane1));
+
+			Cell *cell = addDsp(module);
+			cell->setParam(ID(USE_SIMD), Const("TWO24"));
+			// X = A:B
+			// Y = 0
+			// Z = C
+			cell->setPort(ID(OPMODE), Const::from_string("0110011"));
+
+			log_assert(lane1);
+			log_assert(lane2);
+			f24(AB, C, P, CARRYOUT, lane1);
+			f24(AB, C, P, CARRYOUT, lane2);
+			log_assert(GetSize(AB) == 48);
+			log_assert(GetSize(C) == 48);
+			log_assert(GetSize(P) == 48);
+			log_assert(GetSize(CARRYOUT) == 4);
+			cell->setPort(ID(A), AB.extract(18, 30));
+			cell->setPort(ID(B), AB.extract(0, 18));
+			cell->setPort(ID(C), C);
+			cell->setPort(ID(P), P);
+			cell->setPort(ID(CARRYOUT), CARRYOUT);
+			if (lane1->type == ID($sub))
+				cell->setPort(ID(ALUMODE), Const::from_string("0011"));
+
+			module->remove(lane1);
+			module->remove(lane2);
+
+			module->design->select(module, cell);
+		}
+	};
+	g24(simd24_add);
+	g24(simd24_sub);
+}
+
+void xilinx_dsp_pack(xilinx_dsp_pm &pm)
+{
+	auto &st = pm.st_xilinx_dsp_pack;
+
+	log("Analysing %s.%s for Xilinx DSP packing.\n", log_id(pm.module), log_id(st.dsp));
+
+	log_debug("preAdd:     %s\n", log_id(st.preAdd, "--"));
+	log_debug("ffAD:       %s %s %s\n", log_id(st.ffAD, "--"), log_id(st.ffADcemux, "--"), log_id(st.ffADrstmux, "--"));
+	log_debug("ffA2:       %s %s %s\n", log_id(st.ffA2, "--"), log_id(st.ffA2cemux, "--"), log_id(st.ffA2rstmux, "--"));
+	log_debug("ffA1:       %s %s %s\n", log_id(st.ffA1, "--"), log_id(st.ffA1cemux, "--"), log_id(st.ffA1rstmux, "--"));
+	log_debug("ffB2:       %s %s %s\n", log_id(st.ffB2, "--"), log_id(st.ffB2cemux, "--"), log_id(st.ffB2rstmux, "--"));
+	log_debug("ffB1:       %s %s %s\n", log_id(st.ffB1, "--"), log_id(st.ffB1cemux, "--"), log_id(st.ffB1rstmux, "--"));
+	log_debug("ffD:        %s %s %s\n", log_id(st.ffD, "--"), log_id(st.ffDcemux, "--"), log_id(st.ffDrstmux, "--"));
+	log_debug("dsp:        %s\n", log_id(st.dsp, "--"));
+	log_debug("ffM:        %s %s %s\n", log_id(st.ffM, "--"), log_id(st.ffMcemux, "--"), log_id(st.ffMrstmux, "--"));
+	log_debug("postAdd:    %s\n", log_id(st.postAdd, "--"));
+	log_debug("postAddMux: %s\n", log_id(st.postAddMux, "--"));
+	log_debug("ffP:        %s %s %s\n", log_id(st.ffP, "--"), log_id(st.ffPcemux, "--"), log_id(st.ffPrstmux, "--"));
+	log_debug("overflow:   %s\n", log_id(st.overflow, "--"));
+
+	Cell *cell = st.dsp;
+
+	if (st.preAdd) {
+		log("  preadder %s (%s)\n", log_id(st.preAdd), log_id(st.preAdd->type));
+		bool A_SIGNED = st.preAdd->getParam(ID(A_SIGNED)).as_bool();
+		bool D_SIGNED = st.preAdd->getParam(ID(B_SIGNED)).as_bool();
+		if (st.sigA == st.preAdd->getPort(ID(B)))
+			std::swap(A_SIGNED, D_SIGNED);
+		st.sigA.extend_u0(30, A_SIGNED);
+		st.sigD.extend_u0(25, D_SIGNED);
+		cell->setPort(ID(A), st.sigA);
+		cell->setPort(ID(D), st.sigD);
+		cell->setPort(ID(INMODE), Const::from_string("00100"));
+
+		if (st.ffAD) {
+			if (st.ffADcemux) {
+				SigSpec S = st.ffADcemux->getPort(ID(S));
+				cell->setPort(ID(CEAD), st.ffADcepol ? S : pm.module->Not(NEW_ID, S));
+			}
+			else
+				cell->setPort(ID(CEAD), State::S1);
+			cell->setParam(ID(ADREG), 1);
+		}
+
+		cell->setParam(ID(USE_DPORT), Const("TRUE"));
+
+		pm.autoremove(st.preAdd);
+	}
+	if (st.postAdd) {
+		log("  postadder %s (%s)\n", log_id(st.postAdd), log_id(st.postAdd->type));
+
+		SigSpec &opmode = cell->connections_.at(ID(OPMODE));
+		if (st.postAddMux) {
+			log_assert(st.ffP);
+			opmode[4] = st.postAddMux->getPort(ID(S));
+			pm.autoremove(st.postAddMux);
+		}
+		else if (st.ffP && st.sigC == st.sigP)
+			opmode[4] = State::S0;
+		else
+			opmode[4] = State::S1;
+		opmode[6] = State::S0;
+		opmode[5] = State::S1;
+
+		if (opmode[4] != State::S0) {
+			if (st.postAddMuxAB == ID(A))
+				st.sigC.extend_u0(48, st.postAdd->getParam(ID(B_SIGNED)).as_bool());
+			else
+				st.sigC.extend_u0(48, st.postAdd->getParam(ID(A_SIGNED)).as_bool());
+			cell->setPort(ID(C), st.sigC);
+		}
+
+		pm.autoremove(st.postAdd);
+	}
+	if (st.overflow) {
+		log("  overflow %s (%s)\n", log_id(st.overflow), log_id(st.overflow->type));
+		cell->setParam(ID(USE_PATTERN_DETECT), Const("PATDET"));
+		cell->setParam(ID(SEL_PATTERN), Const("PATTERN"));
+		cell->setParam(ID(SEL_MASK), Const("MASK"));
+
+		if (st.overflow->type == ID($ge)) {
+			Const B = st.overflow->getPort(ID(B)).as_const();
+			log_assert(std::count(B.bits.begin(), B.bits.end(), State::S1) == 1);
+			// Since B is an exact power of 2, subtract 1
+			//   by inverting all bits up until hitting
+			//   that one hi bit
+			for (auto &b : B.bits)
+				if (b == State::S0) b = State::S1;
+				else if (b == State::S1) {
+					b = State::S0;
+					break;
+				}
+			B.extu(48);
+
+			cell->setParam(ID(MASK), B);
+			cell->setParam(ID(PATTERN), Const(0, 48));
+			cell->setPort(ID(OVERFLOW), st.overflow->getPort(ID(Y)));
+		}
+		else log_abort();
+
+		pm.autoremove(st.overflow);
+	}
+
+	if (st.clock != SigBit())
+	{
+		cell->setPort(ID(CLK), st.clock);
+
+		auto f = [&pm,cell](SigSpec &A, Cell* ff, Cell* cemux, bool cepol, IdString ceport, Cell* rstmux, bool rstpol, IdString rstport) {
+			SigSpec D = ff->getPort(ID(D));
+			SigSpec Q = pm.sigmap(ff->getPort(ID(Q)));
+			if (!A.empty())
+				A.replace(Q, D);
+			if (rstmux) {
+				SigSpec Y = rstmux->getPort(ID(Y));
+				SigSpec AB = rstmux->getPort(rstpol ? ID(A) : ID(B));
+				if (!A.empty())
+					A.replace(Y, AB);
+				if (rstport != IdString()) {
+					SigSpec S = rstmux->getPort(ID(S));
+					cell->setPort(rstport, rstpol ? S : pm.module->Not(NEW_ID, S));
+				}
+			}
+			else if (rstport != IdString())
+				cell->setPort(rstport, State::S0);
+			if (cemux) {
+				SigSpec Y = cemux->getPort(ID(Y));
+				SigSpec BA = cemux->getPort(cepol ? ID(B) : ID(A));
+				SigSpec S = cemux->getPort(ID(S));
+				if (!A.empty())
+					A.replace(Y, BA);
+				cell->setPort(ceport, cepol ? S : pm.module->Not(NEW_ID, S));
+			}
+			else
+				cell->setPort(ceport, State::S1);
+
+			for (auto c : Q.chunks()) {
+				auto it = c.wire->attributes.find(ID(init));
+				if (it == c.wire->attributes.end())
+					continue;
+				for (int i = c.offset; i < c.offset+c.width; i++) {
+					log_assert(it->second[i] == State::S0 || it->second[i] == State::Sx);
+					it->second[i] = State::Sx;
+				}
+			}
+		};
+
+		if (st.ffA2) {
+			SigSpec A = cell->getPort(ID(A));
+			f(A, st.ffA2, st.ffA2cemux, st.ffA2cepol, ID(CEA2), st.ffA2rstmux, st.ffArstpol, ID(RSTA));
+			if (st.ffA1) {
+				f(A, st.ffA1, st.ffA1cemux, st.ffA1cepol, ID(CEA1), st.ffA1rstmux, st.ffArstpol, IdString());
+				cell->setParam(ID(AREG), 2);
+				cell->setParam(ID(ACASCREG), 2);
+			}
+			else {
+				cell->setParam(ID(AREG), 1);
+				cell->setParam(ID(ACASCREG), 1);
+			}
+			pm.add_siguser(A, cell);
+			cell->setPort(ID(A), A);
+		}
+		if (st.ffB2) {
+			SigSpec B = cell->getPort(ID(B));
+			f(B, st.ffB2, st.ffB2cemux, st.ffB2cepol, ID(CEB2), st.ffB2rstmux, st.ffBrstpol, ID(RSTB));
+			if (st.ffB1) {
+				f(B, st.ffB1, st.ffB1cemux, st.ffB1cepol, ID(CEB1), st.ffB1rstmux, st.ffBrstpol, IdString());
+				cell->setParam(ID(BREG), 2);
+				cell->setParam(ID(BCASCREG), 2);
+			}
+			else {
+				cell->setParam(ID(BREG), 1);
+				cell->setParam(ID(BCASCREG), 1);
+			}
+			pm.add_siguser(B, cell);
+			cell->setPort(ID(B), B);
+		}
+		if (st.ffD) {
+			SigSpec D = cell->getPort(ID(D));
+			f(D, st.ffD, st.ffDcemux, st.ffDcepol, ID(CED), st.ffDrstmux, st.ffDrstpol, ID(RSTD));
+			pm.add_siguser(D, cell);
+			cell->setPort(ID(D), D);
+			cell->setParam(ID(DREG), 1);
+		}
+		if (st.ffM) {
+			SigSpec M; // unused
+			f(M, st.ffM, st.ffMcemux, st.ffMcepol, ID(CEM), st.ffMrstmux, st.ffMrstpol, ID(RSTM));
+			st.ffM->connections_.at(ID(Q)).replace(st.sigM, pm.module->addWire(NEW_ID, GetSize(st.sigM)));
+			cell->setParam(ID(MREG), State::S1);
+		}
+		if (st.ffP) {
+			SigSpec P; // unused
+			f(P, st.ffP, st.ffPcemux, st.ffPcepol, ID(CEP), st.ffPrstmux, st.ffPrstpol, ID(RSTP));
+			st.ffP->connections_.at(ID(Q)).replace(st.sigP, pm.module->addWire(NEW_ID, GetSize(st.sigP)));
+			cell->setParam(ID(PREG), State::S1);
+		}
+
+		log("  clock: %s (%s)", log_signal(st.clock), "posedge");
+
+		if (st.ffA2) {
+			log(" ffA2:%s", log_id(st.ffA2));
+			if (st.ffA1)
+				log(" ffA1:%s", log_id(st.ffA1));
+		}
+
+		if (st.ffAD)
+			log(" ffAD:%s", log_id(st.ffAD));
+
+		if (st.ffB2) {
+			log(" ffB2:%s", log_id(st.ffB2));
+			if (st.ffB1)
+				log(" ffB1:%s", log_id(st.ffB1));
+		}
+
+		if (st.ffD)
+			log(" ffD:%s", log_id(st.ffD));
+
+		if (st.ffM)
+			log(" ffM:%s", log_id(st.ffM));
+
+		if (st.ffP)
+			log(" ffP:%s", log_id(st.ffP));
+	}
+	log("\n");
+
+	SigSpec P = st.sigP;
+	if (GetSize(P) < 48)
+		P.append(pm.module->addWire(NEW_ID, 48-GetSize(P)));
+	cell->setPort(ID(P), P);
+
+	pm.blacklist(cell);
+}
+
+void xilinx_dsp_packC(xilinx_dsp_CREG_pm &pm)
+{
+	auto &st = pm.st_xilinx_dsp_packC;
+
+	log_debug("Analysing %s.%s for Xilinx DSP packing (CREG).\n", log_id(pm.module), log_id(st.dsp));
+	log_debug("ffC:        %s %s %s\n", log_id(st.ffC, "--"), log_id(st.ffCcemux, "--"), log_id(st.ffCrstmux, "--"));
+
+	Cell *cell = st.dsp;
+
+	if (st.clock != SigBit())
+	{
+		cell->setPort(ID(CLK), st.clock);
+
+		auto f = [&pm,cell](SigSpec &A, Cell* ff, Cell* cemux, bool cepol, IdString ceport, Cell* rstmux, bool rstpol, IdString rstport) {
+			SigSpec D = ff->getPort(ID(D));
+			SigSpec Q = pm.sigmap(ff->getPort(ID(Q)));
+			if (!A.empty())
+				A.replace(Q, D);
+			if (rstmux) {
+				SigSpec Y = rstmux->getPort(ID(Y));
+				SigSpec AB = rstmux->getPort(rstpol ? ID(A) : ID(B));
+				if (!A.empty())
+					A.replace(Y, AB);
+				if (rstport != IdString()) {
+					SigSpec S = rstmux->getPort(ID(S));
+					cell->setPort(rstport, rstpol ? S : pm.module->Not(NEW_ID, S));
+				}
+			}
+			else if (rstport != IdString())
+				cell->setPort(rstport, State::S0);
+			if (cemux) {
+				SigSpec Y = cemux->getPort(ID(Y));
+				SigSpec BA = cemux->getPort(cepol ? ID(B) : ID(A));
+				SigSpec S = cemux->getPort(ID(S));
+				if (!A.empty())
+					A.replace(Y, BA);
+				cell->setPort(ceport, cepol ? S : pm.module->Not(NEW_ID, S));
+			}
+			else
+				cell->setPort(ceport, State::S1);
+
+			for (auto c : Q.chunks()) {
+				auto it = c.wire->attributes.find(ID(init));
+				if (it == c.wire->attributes.end())
+					continue;
+				for (int i = c.offset; i < c.offset+c.width; i++) {
+					log_assert(it->second[i] == State::S0 || it->second[i] == State::Sx);
+					it->second[i] = State::Sx;
+				}
+			}
+		};
+
+		if (st.ffC) {
+			SigSpec C = cell->getPort(ID(C));
+			f(C, st.ffC, st.ffCcemux, st.ffCcepol, ID(CEC), st.ffCrstmux, st.ffCrstpol, ID(RSTC));
+			pm.add_siguser(C, cell);
+			cell->setPort(ID(C), C);
+			cell->setParam(ID(CREG), 1);
+		}
+
+		log("  clock: %s (%s)", log_signal(st.clock), "posedge");
+
+		if (st.ffC)
+			log(" ffC:%s", log_id(st.ffC));
+		log("\n");
+	}
+
+	pm.blacklist(cell);
+}
+
+struct XilinxDspPass : public Pass {
+	XilinxDspPass() : Pass("xilinx_dsp", "Xilinx: pack resources into DSPs") { }
+	void help() YS_OVERRIDE
+	{
+		//   |---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|---v---|
+		log("\n");
+		log("    xilinx_dsp [options] [selection]\n");
+		log("\n");
+		log("Pack input registers (A2, A1, B2, B1, C, D, AD; with optional enable/reset),\n");
+		log("pipeline registers (M; with optional enable/reset), output registers (P; with\n");
+		log("optional enable/reset), pre-adder and/or post-adder into Xilinx DSP resources.\n");
+		log("\n");
+		log("Multiply-accumulate operations using the post-adder with feedback on the 'C'\n");
+		log("input will be folded into the DSP. In this scenario only, the 'C' input can be\n");
+		log("used to override the current accumulation result with a new value, which will\n");
+		log("be added to the multiplier result to form the next accumulation result.\n");
+		log("\n");
+		log("Use of the dedicated 'PCOUT' -> 'PCIN' cascade path is detected for 'P' -> 'C'\n");
+		log("connections (optionally, where 'P' is right-shifted by 17-bits and used as an\n");
+		log("input to the post-adder -- a pattern common for summing partial products to\n");
+		log("implement wide multipliers). Limited support also exists for similar cascading\n");
+		log("for A and B using '[AB]COUT' -> '[AB]CIN'. Currently, cascade chains are limited\n");
+		log("to a maximum length of 20 cells, corresponding to the smallest Xilinx 7 Series\n");
+		log("device.\n");
+		log("\n");
+		log("\n");
+		log("Experimental feature: addition/subtractions less than 12 or 24 bits with the\n");
+		log("'(* use_dsp=\"simd\" *)' attribute attached to the output wire or attached to\n");
+		log("the add/subtract operator will cause those operations to be implemented using\n");
+		log("the 'SIMD' feature of DSPs.\n");
+		log("\n");
+		log("Experimental feature: the presence of a `$ge' cell attached to the registered\n");
+		log("P output implementing the operation \"(P >= <power-of-2>)\" will be transformed\n");
+		log("into using the DSP48E1's pattern detector feature for overflow detection.\n");
+		log("\n");
+	}
+	void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
+	{
+		log_header(design, "Executing XILINX_DSP pass (pack resources into DSPs).\n");
+
+		size_t argidx;
+		for (argidx = 1; argidx < args.size(); argidx++)
+		{
+			// if (args[argidx] == "-singleton") {
+			// 	singleton_mode = true;
+			// 	continue;
+			// }
+			break;
+		}
+		extra_args(args, argidx, design);
+
+		for (auto module : design->selected_modules()) {
+			xilinx_simd_pack(module, module->selected_cells());
+
+			{
+				xilinx_dsp_pm pm(module, module->selected_cells());
+				pm.run_xilinx_dsp_pack(xilinx_dsp_pack);
+			}
+			// Separating out CREG packing is necessary since there
+			//   is no guarantee that the cell ordering corresponds
+			//   to the "expected" case (i.e. the order in which
+			//   they appear in the source) thus the possiblity
+			//   existed that a register got packed as CREG into a
+			//   downstream DSP that should have otherwise been a
+			//   PREG of an upstream DSP that had not been pattern
+			//   matched yet
+			{
+				xilinx_dsp_CREG_pm pm(module, module->selected_cells());
+				pm.run_xilinx_dsp_packC(xilinx_dsp_packC);
+			}
+			{
+				xilinx_dsp_cascade_pm pm(module, module->selected_cells());
+				pm.run_xilinx_dsp_cascade();
+			}
+		}
+	}
+} XilinxDspPass;
+
+PRIVATE_NAMESPACE_END

passes/pmgen/xilinx_dsp.pmg

@@ -0,0 +1,587 @@
+pattern xilinx_dsp_pack
+
+state <SigBit> clock
+state <SigSpec> sigA sigB sigC sigD sigM sigP
+state <IdString> postAddAB postAddMuxAB
+state <bool> ffA1cepol ffA2cepol ffADcepol ffB1cepol ffB2cepol ffDcepol ffMcepol ffPcepol
+state <bool> ffArstpol ffADrstpol ffBrstpol ffDrstpol ffMrstpol ffPrstpol
+
+state <Cell*> ffAD ffADcemux ffADrstmux ffA1 ffA1cemux ffA1rstmux ffA2 ffA2cemux ffA2rstmux
+state <Cell*> ffB1 ffB1cemux ffB1rstmux ffB2 ffB2cemux ffB2rstmux
+state <Cell*> ffD ffDcemux ffDrstmux ffM ffMcemux ffMrstmux ffP ffPcemux ffPrstmux
+
+// subpattern
+state <SigSpec> argQ argD
+state <bool> ffcepol ffrstpol
+state <int> ffoffset
+udata <SigSpec> dffD dffQ
+udata <SigBit> dffclock
+udata <Cell*> dff dffcemux dffrstmux
+udata <bool> dffcepol dffrstpol
+
+match dsp
+	select dsp->type.in(\DSP48E1)
+endmatch
+
+code sigA sigB sigC sigD sigM clock
+	auto unextend = [](const SigSpec &sig) {
+		int i;
+		for (i = GetSize(sig)-1; i > 0; i--)
+			if (sig[i] != sig[i-1])
+				break;
+		// Do not remove non-const sign bit
+		if (sig[i].wire)
+			++i;
+		return sig.extract(0, i);
+	};
+	sigA = unextend(port(dsp, \A));
+	sigB = unextend(port(dsp, \B));
+
+	sigC = port(dsp, \C, SigSpec());
+	sigD = port(dsp, \D, SigSpec());
+
+	SigSpec P = port(dsp, \P);
+	if (param(dsp, \USE_MULT, Const("MULTIPLY")).decode_string() == "MULTIPLY") {
+		// Only care about those bits that are used
+		int i;
+		for (i = 0; i < GetSize(P); i++) {
+			if (nusers(P[i]) <= 1)
+				break;
+			sigM.append(P[i]);
+		}
+		log_assert(nusers(P.extract_end(i)) <= 1);
+	}
+	else
+		sigM = P;
+	// This sigM could have no users if downstream $add
+	//   is narrower than $mul result, for example
+	if (sigM.empty())
+		reject;
+
+	clock = port(dsp, \CLK, SigBit());
+endcode
+
+code argQ ffAD ffADcemux ffADrstmux ffADcepol ffADrstpol sigA clock
+	if (param(dsp, \ADREG).as_int() == 0) {
+		argQ = sigA;
+		subpattern(in_dffe);
+		if (dff) {
+			ffAD = dff;
+			clock = dffclock;
+			if (dffrstmux) {
+				ffADrstmux = dffrstmux;
+				ffADrstpol = dffrstpol;
+			}
+			if (dffcemux) {
+				ffADcemux = dffcemux;
+				ffADcepol = dffcepol;
+			}
+			sigA = dffD;
+		}
+	}
+endcode
+
+match preAdd
+	if sigD.empty() || sigD.is_fully_zero()
+	// Ensure that preAdder not already used
+	if param(dsp, \USE_DPORT, Const("FALSE")).decode_string() == "FALSE"
+	if port(dsp, \INMODE, Const(0, 5)).is_fully_zero()
+
+	select preAdd->type.in($add)
+	// Output has to be 25 bits or less
+	select GetSize(port(preAdd, \Y)) <= 25
+	select nusers(port(preAdd, \Y)) == 2
+	choice <IdString> AB {\A, \B}
+	// A port has to be 30 bits or less
+	select GetSize(port(preAdd, AB)) <= 30
+	define <IdString> BA (AB == \A ? \B : \A)
+	// D port has to be 25 bits or less
+	select GetSize(port(preAdd, BA)) <= 25
+	index <SigSpec> port(preAdd, \Y) === sigA
+
+	optional
+endmatch
+
+code sigA sigD
+	if (preAdd) {
+		sigA = port(preAdd, \A);
+		sigD = port(preAdd, \B);
+		if (GetSize(sigA) < GetSize(sigD))
+			std::swap(sigA, sigD);
+	}
+endcode
+
+code argQ ffAD ffADcemux ffADrstmux ffADcepol ffADrstpol sigA clock ffA2 ffA2cemux ffA2rstmux ffA2cepol ffArstpol ffA1 ffA1cemux ffA1rstmux ffA1cepol
+	// Only search for ffA2 if there was a pre-adder
+	//   (otherwise ffA2 would have been matched as ffAD)
+	if (preAdd) {
+		if (param(dsp, \AREG).as_int() == 0) {
+			argQ = sigA;
+			subpattern(in_dffe);
+			if (dff) {
+				ffA2 = dff;
+				clock = dffclock;
+				if (dffrstmux) {
+					ffA2rstmux = dffrstmux;
+					ffArstpol = dffrstpol;
+				}
+				if (dffcemux) {
+					ffA2cepol = dffcepol;
+					ffA2cemux = dffcemux;
+				}
+				sigA = dffD;
+			}
+		}
+	}
+	// And if there wasn't a pre-adder,
+	//   move AD register to A
+	else if (ffAD) {
+		log_assert(!ffA2 && !ffA2cemux && !ffA2rstmux);
+		std::swap(ffA2, ffAD);
+		std::swap(ffA2cemux, ffADcemux);
+		std::swap(ffA2rstmux, ffADrstmux);
+		ffA2cepol = ffADcepol;
+		ffArstpol = ffADrstpol;
+	}
+
+	// Now attempt to match A1
+	if (ffA2) {
+		argQ = sigA;
+		subpattern(in_dffe);
+		if (dff) {
+			if ((ffA2rstmux != nullptr) ^ (dffrstmux != nullptr))
+				goto ffA1_end;
+			if (dffrstmux) {
+				if (ffArstpol != dffrstpol)
+					goto ffA1_end;
+				if (port(ffA2rstmux, \S) != port(dffrstmux, \S))
+					goto ffA1_end;
+				ffA1rstmux = dffrstmux;
+			}
+
+			ffA1 = dff;
+			clock = dffclock;
+
+			if (dffcemux) {
+				ffA1cemux = dffcemux;
+				ffA1cepol = dffcepol;
+			}
+			sigA = dffD;
+
+ffA1_end:		;
+		}
+	}
+endcode
+
+code argQ ffB2 ffB2cemux ffB2rstmux ffB2cepol ffBrstpol sigB clock ffB1 ffB1cemux ffB1rstmux ffB1cepol
+	if (param(dsp, \BREG).as_int() == 0) {
+		argQ = sigB;
+		subpattern(in_dffe);
+		if (dff) {
+			ffB2 = dff;
+			clock = dffclock;
+			if (dffrstmux) {
+				ffB2rstmux = dffrstmux;
+				ffBrstpol = dffrstpol;
+			}
+			if (dffcemux) {
+				ffB2cemux = dffcemux;
+				ffB2cepol = dffcepol;
+			}
+			sigB = dffD;
+
+			// Now attempt to match B1
+			if (ffB2) {
+				argQ = sigB;
+				subpattern(in_dffe);
+				if (dff) {
+					if ((ffB2rstmux != nullptr) ^ (dffrstmux != nullptr))
+						goto ffB1_end;
+					if (dffrstmux) {
+						if (ffBrstpol != dffrstpol)
+							goto ffB1_end;
+						if (port(ffB2rstmux, \S) != port(dffrstmux, \S))
+							goto ffB1_end;
+						ffB1rstmux = dffrstmux;
+					}
+
+					ffB1 = dff;
+					clock = dffclock;
+
+					if (dffcemux) {
+						ffB1cemux = dffcemux;
+						ffB1cepol = dffcepol;
+					}
+					sigB = dffD;
+
+ffB1_end:				;
+				}
+			}
+
+		}
+	}
+endcode
+
+code argQ ffD ffDcemux ffDrstmux ffDcepol ffDrstpol sigD clock
+	if (param(dsp, \DREG).as_int() == 0) {
+		argQ = sigD;
+		subpattern(in_dffe);
+		if (dff) {
+			ffD = dff;
+			clock = dffclock;
+			if (dffrstmux) {
+				ffDrstmux = dffrstmux;
+				ffDrstpol = dffrstpol;
+			}
+			if (dffcemux) {
+				ffDcemux = dffcemux;
+				ffDcepol = dffcepol;
+			}
+			sigD = dffD;
+		}
+	}
+endcode
+
+code argD ffM ffMcemux ffMrstmux ffMcepol ffMrstpol sigM sigP clock
+	if (param(dsp, \MREG).as_int() == 0 && nusers(sigM) == 2) {
+		argD = sigM;
+		subpattern(out_dffe);
+		if (dff) {
+			ffM = dff;
+			clock = dffclock;
+			if (dffrstmux) {
+				ffMrstmux = dffrstmux;
+				ffMrstpol = dffrstpol;
+			}
+			if (dffcemux) {
+				ffMcemux = dffcemux;
+				ffMcepol = dffcepol;
+			}
+			sigM = dffQ;
+		}
+	}
+	sigP = sigM;
+endcode
+
+match postAdd
+	// Ensure that Z mux is not already used
+	if port(dsp, \OPMODE, SigSpec()).extract(4,3).is_fully_zero()
+
+	select postAdd->type.in($add)
+	select GetSize(port(postAdd, \Y)) <= 48
+	choice <IdString> AB {\A, \B}
+	select nusers(port(postAdd, AB)) <= 3
+	filter ffMcemux || nusers(port(postAdd, AB)) == 2
+	filter !ffMcemux || nusers(port(postAdd, AB)) == 3
+
+	index <SigBit> port(postAdd, AB)[0] === sigP[0]
+	filter GetSize(port(postAdd, AB)) >= GetSize(sigP)
+	filter port(postAdd, AB).extract(0, GetSize(sigP)) == sigP
+	filter port(postAdd, AB).extract_end(GetSize(sigP)) == SigSpec(sigP[GetSize(sigP)-1], GetSize(port(postAdd, AB))-GetSize(sigP))
+	set postAddAB AB
+	optional
+endmatch
+
+code sigC sigP
+	if (postAdd) {
+		sigC = port(postAdd, postAddAB == \A ? \B : \A);
+		sigP = port(postAdd, \Y);
+	}
+endcode
+
+code argD ffP ffPcemux ffPrstmux ffPcepol ffPrstpol sigP clock
+	if (param(dsp, \PREG).as_int() == 0) {
+		int users = 2;
+		// If ffMcemux and no postAdd new-value net must have three users: ffMcemux, ffM and ffPcemux
+		if (ffMcemux && !postAdd) users++;
+		if (nusers(sigP) == users) {
+			argD = sigP;
+			subpattern(out_dffe);
+			if (dff) {
+				ffP = dff;
+				clock = dffclock;
+				if (dffrstmux) {
+					ffPrstmux = dffrstmux;
+					ffPrstpol = dffrstpol;
+				}
+				if (dffcemux) {
+					ffPcemux = dffcemux;
+					ffPcepol = dffcepol;
+				}
+				sigP = dffQ;
+			}
+		}
+	}
+endcode
+
+match postAddMux
+	if postAdd
+	if ffP
+	select postAddMux->type.in($mux)
+	select nusers(port(postAddMux, \Y)) == 2
+	choice <IdString> AB {\A, \B}
+	index <SigSpec> port(postAddMux, AB) === sigP
+	index <SigSpec> port(postAddMux, \Y) === sigC
+	set postAddMuxAB AB
+	optional
+endmatch
+
+code sigC
+	if (postAddMux)
+		sigC = port(postAddMux, postAddMuxAB == \A ? \B : \A);
+endcode
+
+match overflow
+	if ffP
+	if param(dsp, \USE_PATTERN_DETECT, Const("NO_PATDET")).decode_string() == "NO_PATDET"
+	select overflow->type.in($ge)
+	select GetSize(port(overflow, \Y)) <= 48
+	select port(overflow, \B).is_fully_const()
+	define <Const> B port(overflow, \B).as_const()
+	select std::count(B.bits.begin(), B.bits.end(), State::S1) == 1
+	index <SigSpec> port(overflow, \A) === sigP
+	optional
+endmatch
+
+code
+	accept;
+endcode
+
+// #######################
+
+subpattern in_dffe
+arg argD argQ clock
+
+code
+	dff = nullptr;
+	for (auto c : argQ.chunks()) {
+		if (!c.wire)
+			reject;
+		if (c.wire->get_bool_attribute(\keep))
+			reject;
+		Const init = c.wire->attributes.at(\init, State::Sx);
+		if (!init.is_fully_undef() && !init.is_fully_zero())
+			reject;
+	}
+endcode
+
+match ff
+	select ff->type.in($dff)
+	// DSP48E1 does not support clock inversion
+	select param(ff, \CLK_POLARITY).as_bool()
+
+	slice offset GetSize(port(ff, \D))
+	index <SigBit> port(ff, \Q)[offset] === argQ[0]
+
+	// Check that the rest of argQ is present
+	filter GetSize(port(ff, \Q)) >= offset + GetSize(argQ)
+	filter port(ff, \Q).extract(offset, GetSize(argQ)) == argQ
+
+	set ffoffset offset
+endmatch
+
+code argQ argD
+{
+	if (clock != SigBit() && port(ff, \CLK) != clock)
+		reject;
+
+	SigSpec Q = port(ff, \Q);
+	dff = ff;
+	dffclock = port(ff, \CLK);
+	dffD = argQ;
+	argD = port(ff, \D);
+	argQ = Q;
+	dffD.replace(argQ, argD);
+	// Only search for ffrstmux if dffD only
+	//   has two (ff, ffrstmux) users
+	if (nusers(dffD) > 2)
+		argD = SigSpec();
+}
+endcode
+
+match ffrstmux
+	if !argD.empty()
+	select ffrstmux->type.in($mux)
+	index <SigSpec> port(ffrstmux, \Y) === argD
+
+	choice <IdString> BA {\B, \A}
+	// DSP48E1 only supports reset to zero
+	select port(ffrstmux, BA).is_fully_zero()
+
+	define <bool> pol (BA == \B)
+	set ffrstpol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffrstmux) {
+		dffrstmux = ffrstmux;
+		dffrstpol = ffrstpol;
+		argD = port(ffrstmux, ffrstpol ? \A : \B);
+		dffD.replace(port(ffrstmux, \Y), argD);
+
+		// Only search for ffcemux if argQ has at
+		//   least 3 users (ff, <upstream>, ffrstmux) and
+		//   dffD only has two (ff, ffrstmux)
+		if (!(nusers(argQ) >= 3 && nusers(dffD) == 2))
+			argD = SigSpec();
+	}
+	else
+		dffrstmux = nullptr;
+endcode
+
+match ffcemux
+	if !argD.empty()
+	select ffcemux->type.in($mux)
+	index <SigSpec> port(ffcemux, \Y) === argD
+	choice <IdString> AB {\A, \B}
+	index <SigSpec> port(ffcemux, AB) === argQ
+	define <bool> pol (AB == \A)
+	set ffcepol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffcemux) {
+		dffcemux = ffcemux;
+		dffcepol = ffcepol;
+		argD = port(ffcemux, ffcepol ? \B : \A);
+		dffD.replace(port(ffcemux, \Y), argD);
+	}
+	else
+		dffcemux = nullptr;
+endcode
+
+// #######################
+
+subpattern out_dffe
+arg argD argQ clock
+
+code
+	dff = nullptr;
+	for (auto c : argD.chunks())
+		if (c.wire->get_bool_attribute(\keep))
+			reject;
+endcode
+
+match ffcemux
+	select ffcemux->type.in($mux)
+	// ffcemux output must have two users: ffcemux and ff.D
+	select nusers(port(ffcemux, \Y)) == 2
+
+	choice <IdString> AB {\A, \B}
+	// keep-last-value net must have at least three users: ffcemux, ff, downstream sink(s)
+	select nusers(port(ffcemux, AB)) >= 3
+
+	slice offset GetSize(port(ffcemux, \Y))
+	define <IdString> BA (AB == \A ? \B : \A)
+	index <SigBit> port(ffcemux, BA)[offset] === argD[0]
+
+	// Check that the rest of argD is present
+	filter GetSize(port(ffcemux, BA)) >= offset + GetSize(argD)
+	filter port(ffcemux, BA).extract(offset, GetSize(argD)) == argD
+
+	set ffoffset offset
+	define <bool> pol (AB == \A)
+	set ffcepol pol
+
+	semioptional
+endmatch
+
+code argD argQ
+	dffcemux = ffcemux;
+	if (ffcemux) {
+		SigSpec BA = port(ffcemux, ffcepol ? \B : \A);
+		SigSpec Y = port(ffcemux, \Y);
+		argQ = argD;
+		argD.replace(BA, Y);
+		argQ.replace(BA, port(ffcemux, ffcepol ? \A : \B));
+
+		dffcemux = ffcemux;
+		dffcepol = ffcepol;
+	}
+endcode
+
+match ffrstmux
+	select ffrstmux->type.in($mux)
+	// ffrstmux output must have two users: ffrstmux and ff.D
+	select nusers(port(ffrstmux, \Y)) == 2
+
+	choice <IdString> BA {\B, \A}
+	// DSP48E1 only supports reset to zero
+	select port(ffrstmux, BA).is_fully_zero()
+
+	slice offset GetSize(port(ffrstmux, \Y))
+	define <IdString> AB (BA == \B ? \A : \B)
+	index <SigBit> port(ffrstmux, AB)[offset] === argD[0]
+
+	// Check that offset is consistent
+	filter !ffcemux || ffoffset == offset
+	// Check that the rest of argD is present
+	filter GetSize(port(ffrstmux, AB)) >= offset + GetSize(argD)
+	filter port(ffrstmux, AB).extract(offset, GetSize(argD)) == argD
+
+	set ffoffset offset
+	define <bool> pol (AB == \A)
+	set ffrstpol pol
+
+	semioptional
+endmatch
+
+code argD argQ
+	dffrstmux = ffrstmux;
+	if (ffrstmux) {
+		SigSpec AB = port(ffrstmux, ffrstpol ? \A : \B);
+		SigSpec Y = port(ffrstmux, \Y);
+		argD.replace(AB, Y);
+
+		dffrstmux = ffrstmux;
+		dffrstpol = ffrstpol;
+	}
+endcode
+
+match ff
+	select ff->type.in($dff)
+	// DSP48E1 does not support clock inversion
+	select param(ff, \CLK_POLARITY).as_bool()
+
+	slice offset GetSize(port(ff, \D))
+	index <SigBit> port(ff, \D)[offset] === argD[0]
+
+	// Check that offset is consistent
+	filter (!ffcemux && !ffrstmux) || ffoffset == offset
+	// Check that the rest of argD is present
+	filter GetSize(port(ff, \D)) >= offset + GetSize(argD)
+	filter port(ff, \D).extract(offset, GetSize(argD)) == argD
+	// Check that FF.Q is connected to CE-mux
+	filter !ffcemux || port(ff, \Q).extract(offset, GetSize(argQ)) == argQ
+
+	set ffoffset offset
+endmatch
+
+code argQ
+	if (ff) {
+		if (clock != SigBit() && port(ff, \CLK) != clock)
+			reject;
+
+		SigSpec D = port(ff, \D);
+		SigSpec Q = port(ff, \Q);
+		if (!ffcemux) {
+			argQ = argD;
+			argQ.replace(D, Q);
+		}
+
+		for (auto c : argQ.chunks()) {
+			Const init = c.wire->attributes.at(\init, State::Sx);
+			if (!init.is_fully_undef() && !init.is_fully_zero())
+				reject;
+		}
+
+		dff = ff;
+		dffQ = argQ;
+		dffclock = port(ff, \CLK);
+	}
+	// No enable/reset mux possible without flop
+	else if (dffcemux || dffrstmux)
+		reject;
+endcode

passes/pmgen/xilinx_dsp_CREG.pmg

@@ -0,0 +1,181 @@
+pattern xilinx_dsp_packC
+
+udata <std::function<SigSpec(const SigSpec&)>> unextend
+state <SigBit> clock
+state <SigSpec> sigC sigP
+state <bool> ffCcepol ffCrstpol
+state <Cell*> ffC ffCcemux ffCrstmux
+
+// subpattern
+state <SigSpec> argQ argD
+state <bool> ffcepol ffrstpol
+state <int> ffoffset
+udata <SigSpec> dffD dffQ
+udata <SigBit> dffclock
+udata <Cell*> dff dffcemux dffrstmux
+udata <bool> dffcepol dffrstpol
+
+match dsp
+	select dsp->type.in(\DSP48E1)
+	select param(dsp, \CREG, 1).as_int() == 0
+	select nusers(port(dsp, \C, SigSpec())) > 1
+endmatch
+
+code argQ ffC ffCcemux ffCrstmux ffCcepol ffCrstpol sigC sigP clock
+	unextend = [](const SigSpec &sig) {
+		int i;
+		for (i = GetSize(sig)-1; i > 0; i--)
+			if (sig[i] != sig[i-1])
+				break;
+		// Do not remove non-const sign bit
+		if (sig[i].wire)
+			++i;
+		return sig.extract(0, i);
+	};
+	sigC = unextend(port(dsp, \C, SigSpec()));
+
+	SigSpec P = port(dsp, \P);
+	if (param(dsp, \USE_MULT, Const("MULTIPLY")).decode_string() == "MULTIPLY") {
+		// Only care about those bits that are used
+		int i;
+		for (i = 0; i < GetSize(P); i++) {
+			if (nusers(P[i]) <= 1)
+				break;
+			sigP.append(P[i]);
+		}
+		log_assert(nusers(P.extract_end(i)) <= 1);
+	}
+	else
+		sigP = P;
+
+	if (sigC == sigP)
+		reject;
+
+	clock = port(dsp, \CLK, SigBit());
+
+	argQ = sigC;
+	subpattern(in_dffe);
+	if (dff) {
+		ffC = dff;
+		clock = dffclock;
+		if (dffrstmux) {
+			ffCrstmux = dffrstmux;
+			ffCrstpol = dffrstpol;
+		}
+		if (dffcemux) {
+			ffCcemux = dffcemux;
+			ffCcepol = dffcepol;
+		}
+		sigC = dffD;
+	}
+endcode
+
+code
+	if (ffC)
+		accept;
+endcode
+
+// #######################
+
+subpattern in_dffe
+arg argD argQ clock
+
+code
+	dff = nullptr;
+	for (auto c : argQ.chunks()) {
+		if (!c.wire)
+			reject;
+		if (c.wire->get_bool_attribute(\keep))
+			reject;
+		Const init = c.wire->attributes.at(\init, State::Sx);
+		if (!init.is_fully_undef() && !init.is_fully_zero())
+			reject;
+	}
+endcode
+
+match ff
+	select ff->type.in($dff)
+	// DSP48E1 does not support clock inversion
+	select param(ff, \CLK_POLARITY).as_bool()
+
+	slice offset GetSize(port(ff, \D))
+	index <SigBit> port(ff, \Q)[offset] === argQ[0]
+
+	// Check that the rest of argQ is present
+	filter GetSize(port(ff, \Q)) >= offset + GetSize(argQ)
+	filter port(ff, \Q).extract(offset, GetSize(argQ)) == argQ
+
+	set ffoffset offset
+endmatch
+
+code argQ argD
+{
+	if (clock != SigBit() && port(ff, \CLK) != clock)
+		reject;
+
+	SigSpec Q = port(ff, \Q);
+	dff = ff;
+	dffclock = port(ff, \CLK);
+	dffD = argQ;
+	argD = port(ff, \D);
+	argQ = Q;
+	dffD.replace(argQ, argD);
+	// Only search for ffrstmux if dffD only
+	//   has two (ff, ffrstmux) users
+	if (nusers(dffD) > 2)
+		argD = SigSpec();
+}
+endcode
+
+match ffrstmux
+	if !argD.empty()
+	select ffrstmux->type.in($mux)
+	index <SigSpec> port(ffrstmux, \Y) === argD
+
+	choice <IdString> BA {\B, \A}
+	// DSP48E1 only supports reset to zero
+	select port(ffrstmux, BA).is_fully_zero()
+
+	define <bool> pol (BA == \B)
+	set ffrstpol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffrstmux) {
+		dffrstmux = ffrstmux;
+		dffrstpol = ffrstpol;
+		argD = port(ffrstmux, ffrstpol ? \A : \B);
+		dffD.replace(port(ffrstmux, \Y), argD);
+
+		// Only search for ffcemux if argQ has at
+		//   least 3 users (ff, <upstream>, ffrstmux) and
+		//   dffD only has two (ff, ffrstmux)
+		if (!(nusers(argQ) >= 3 && nusers(dffD) == 2))
+			argD = SigSpec();
+	}
+	else
+		dffrstmux = nullptr;
+endcode
+
+match ffcemux
+	if !argD.empty()
+	select ffcemux->type.in($mux)
+	index <SigSpec> port(ffcemux, \Y) === argD
+	choice <IdString> AB {\A, \B}
+	index <SigSpec> port(ffcemux, AB) === argQ
+	define <bool> pol (AB == \A)
+	set ffcepol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffcemux) {
+		dffcemux = ffcemux;
+		dffcepol = ffcepol;
+		argD = port(ffcemux, ffcepol ? \B : \A);
+		dffD.replace(port(ffcemux, \Y), argD);
+	}
+	else
+		dffcemux = nullptr;
+endcode

passes/pmgen/xilinx_dsp_cascade.pmg

@@ -0,0 +1,336 @@
+pattern xilinx_dsp_cascade
+
+udata <std::function<SigSpec(const SigSpec&)>> unextend
+udata <vector<std::tuple<Cell*,int,int,int>>> chain longest_chain
+state <Cell*> next
+state <SigSpec> clock
+state <int> AREG BREG
+
+// subpattern
+state <SigSpec> argQ argD
+state <bool> ffcepol ffrstpol
+state <int> ffoffset
+udata <SigSpec> dffD dffQ
+udata <SigBit> dffclock
+udata <Cell*> dff dffcemux dffrstmux
+udata <bool> dffcepol dffrstpol
+
+code
+#define MAX_DSP_CASCADE 20
+endcode
+
+match first
+	select first->type.in(\DSP48E1)
+	select port(first, \OPMODE, Const(0, 7)).extract(4,3) == Const::from_string("000")
+	select nusers(port(first, \PCOUT, SigSpec())) <= 1
+endmatch
+
+code
+	longest_chain.clear();
+	chain.emplace_back(first, -1, -1, -1);
+	subpattern(tail);
+finally
+	chain.pop_back();
+	log_assert(chain.empty());
+	if (GetSize(longest_chain) > 1) {
+		Cell *dsp = std::get<0>(longest_chain.front());
+
+		Cell *dsp_pcin;
+		int P, AREG, BREG;
+		for (int i = 1; i < GetSize(longest_chain); i++) {
+			std::tie(dsp_pcin,P,AREG,BREG) = longest_chain[i];
+
+			if (i % MAX_DSP_CASCADE > 0) {
+				if (P >= 0) {
+					Wire *cascade = module->addWire(NEW_ID, 48);
+					dsp_pcin->setPort(ID(C), Const(0, 48));
+					dsp_pcin->setPort(ID(PCIN), cascade);
+					dsp->setPort(ID(PCOUT), cascade);
+					add_siguser(cascade, dsp_pcin);
+					add_siguser(cascade, dsp);
+
+					SigSpec opmode = port(dsp_pcin, \OPMODE, Const(0, 7));
+					if (P == 17)
+						opmode[6] = State::S1;
+					else if (P == 0)
+						opmode[6] = State::S0;
+					else log_abort();
+
+					opmode[5] = State::S0;
+					opmode[4] = State::S1;
+					dsp_pcin->setPort(\OPMODE, opmode);
+
+					log_debug("PCOUT -> PCIN cascade for %s -> %s\n", log_id(dsp), log_id(dsp_pcin));
+				}
+				if (AREG >= 0) {
+					Wire *cascade = module->addWire(NEW_ID, 30);
+					dsp_pcin->setPort(ID(A), Const(0, 30));
+					dsp_pcin->setPort(ID(ACIN), cascade);
+					dsp->setPort(ID(ACOUT), cascade);
+					add_siguser(cascade, dsp_pcin);
+					add_siguser(cascade, dsp);
+
+					dsp->setParam(ID(ACASCREG), AREG);
+					dsp_pcin->setParam(ID(A_INPUT), Const("CASCADE"));
+
+					log_debug("ACOUT -> ACIN cascade for %s -> %s\n", log_id(dsp), log_id(dsp_pcin));
+				}
+				if (BREG >= 0) {
+					Wire *cascade = module->addWire(NEW_ID, 18);
+					dsp_pcin->setPort(ID(B), Const(0, 18));
+					dsp_pcin->setPort(ID(BCIN), cascade);
+					dsp->setPort(ID(BCOUT), cascade);
+					add_siguser(cascade, dsp_pcin);
+					add_siguser(cascade, dsp);
+
+					dsp->setParam(ID(BCASCREG), BREG);
+					dsp_pcin->setParam(ID(B_INPUT), Const("CASCADE"));
+
+					log_debug("BCOUT -> BCIN cascade for %s -> %s\n", log_id(dsp), log_id(dsp_pcin));
+				}
+			}
+			else {
+				log_debug("  Blocking %s -> %s cascade (exceeds max: %d)\n", log_id(dsp), log_id(dsp_pcin), MAX_DSP_CASCADE);
+			}
+
+			dsp = dsp_pcin;
+		}
+
+		accept;
+	}
+endcode
+
+// ------------------------------------------------------------------
+
+subpattern tail
+arg first
+arg next
+
+match nextP
+	select nextP->type.in(\DSP48E1)
+	select !param(nextP, \CREG, State::S1).as_bool()
+	select port(nextP, \OPMODE, Const(0, 7)).extract(4,3) == Const::from_string("011")
+	select nusers(port(nextP, \C, SigSpec())) > 1
+	select nusers(port(nextP, \PCIN, SigSpec())) == 0
+	index <SigBit> port(nextP, \C)[0] === port(std::get<0>(chain.back()), \P)[0]
+	semioptional
+endmatch
+
+match nextP_shift17
+	if !nextP
+	select nextP_shift17->type.in(\DSP48E1)
+	select !param(nextP_shift17, \CREG, State::S1).as_bool()
+	select port(nextP_shift17, \OPMODE, Const(0, 7)).extract(4,3) == Const::from_string("011")
+	select nusers(port(nextP_shift17, \C, SigSpec())) > 1
+	select nusers(port(nextP_shift17, \PCIN, SigSpec())) == 0
+	index <SigBit> port(nextP_shift17, \C)[0] === port(std::get<0>(chain.back()), \P)[17]
+	semioptional
+endmatch
+
+code next
+	next = nextP;
+	if (!nextP)
+		next = nextP_shift17;
+	if (next) {
+		unextend = [](const SigSpec &sig) {
+			int i;
+			for (i = GetSize(sig)-1; i > 0; i--)
+				if (sig[i] != sig[i-1])
+					break;
+			// Do not remove non-const sign bit
+			if (sig[i].wire)
+				++i;
+			return sig.extract(0, i);
+		};
+	}
+endcode
+
+code argQ clock AREG
+	AREG = -1;
+	if (next) {
+		Cell *prev = std::get<0>(chain.back());
+		if (param(prev, \AREG, 2).as_int() > 0 &&
+				param(next, \AREG, 2).as_int() > 0 &&
+				param(next, \A_INPUT, Const("DIRECT")).decode_string() == "DIRECT" &&
+				port(next, \ACIN, SigSpec()).is_fully_zero() &&
+				nusers(port(prev, \ACOUT, SigSpec())) <= 1) {
+			argQ = unextend(port(next, \A));
+			clock = port(prev, \CLK);
+			subpattern(in_dffe);
+			if (dff) {
+				if (!dffrstmux && port(prev, \RSTA, State::S0) != State::S0)
+					goto reject_AREG;
+				if (dffrstmux && port(dffrstmux, \S) != port(prev, \RSTA, State::S0))
+					goto reject_AREG;
+				if (!dffcemux && port(prev, \CEA2, State::S0) != State::S0)
+					goto reject_AREG;
+				if (dffcemux && port(dffcemux, \S) != port(prev, \CEA2, State::S0))
+					goto reject_AREG;
+				if (dffD == unextend(port(prev, \A)))
+					AREG = 1;
+reject_AREG:			;
+			}
+		}
+	}
+endcode
+
+code argQ clock BREG
+	BREG = -1;
+	if (next) {
+		Cell *prev = std::get<0>(chain.back());
+		if (param(prev, \BREG, 2).as_int() > 0 &&
+				param(next, \BREG, 2).as_int() > 0 &&
+				param(next, \B_INPUT, Const("DIRECT")).decode_string() == "DIRECT" &&
+				port(next, \BCIN, SigSpec()).is_fully_zero() &&
+				nusers(port(prev, \BCOUT, SigSpec())) <= 1) {
+			argQ = unextend(port(next, \B));
+			clock = port(prev, \CLK);
+			subpattern(in_dffe);
+			if (dff) {
+				if (!dffrstmux && port(prev, \RSTB, State::S0) != State::S0)
+					goto reject_BREG;
+				if (dffrstmux && port(dffrstmux, \S) != port(prev, \RSTB, State::S0))
+					goto reject_BREG;
+				if (!dffcemux && port(prev, \CEB2, State::S0) != State::S0)
+					goto reject_BREG;
+				if (dffcemux && port(dffcemux, \S) != port(prev, \CEB2, State::S0))
+					goto reject_BREG;
+				if (dffD == unextend(port(prev, \B)))
+					BREG = 1;
+reject_BREG:			;
+			}
+		}
+	}
+endcode
+
+code
+	if (next) {
+		chain.emplace_back(next, nextP_shift17 ? 17 : nextP ? 0 : -1, AREG, BREG);
+
+		SigSpec sigC = unextend(port(next, \C));
+
+		// TODO: Cannot use 'reject' since semioptional
+		if (nextP_shift17) {
+			if (GetSize(sigC)+17 <= GetSize(port(std::get<0>(chain.back()), \P)) &&
+					port(std::get<0>(chain.back()), \P).extract(17, GetSize(sigC)) != sigC)
+				subpattern(tail);
+		}
+		else {
+			if (GetSize(sigC) <= GetSize(port(std::get<0>(chain.back()), \P)) &&
+					port(std::get<0>(chain.back()), \P).extract(0, GetSize(sigC)) != sigC)
+				subpattern(tail);
+
+		}
+	} else {
+		if (GetSize(chain) > GetSize(longest_chain))
+			longest_chain = chain;
+	}
+finally
+	if (next)
+		chain.pop_back();
+endcode
+
+// #######################
+
+subpattern in_dffe
+arg argD argQ clock
+
+code
+	dff = nullptr;
+	for (auto c : argQ.chunks()) {
+		if (!c.wire)
+			reject;
+		if (c.wire->get_bool_attribute(\keep))
+			reject;
+		Const init = c.wire->attributes.at(\init, State::Sx);
+		if (!init.is_fully_undef() && !init.is_fully_zero())
+			reject;
+	}
+endcode
+
+match ff
+	select ff->type.in($dff)
+	// DSP48E1 does not support clock inversion
+	select param(ff, \CLK_POLARITY).as_bool()
+
+	slice offset GetSize(port(ff, \D))
+	index <SigBit> port(ff, \Q)[offset] === argQ[0]
+
+	// Check that the rest of argQ is present
+	filter GetSize(port(ff, \Q)) >= offset + GetSize(argQ)
+	filter port(ff, \Q).extract(offset, GetSize(argQ)) == argQ
+
+	set ffoffset offset
+endmatch
+
+code argQ argD
+{
+	if (clock != SigBit() && port(ff, \CLK) != clock)
+		reject;
+
+	SigSpec Q = port(ff, \Q);
+	dff = ff;
+	dffclock = port(ff, \CLK);
+	dffD = argQ;
+	argD = port(ff, \D);
+	argQ = Q;
+	dffD.replace(argQ, argD);
+	// Only search for ffrstmux if dffD only
+	//   has two (ff, ffrstmux) users
+	if (nusers(dffD) > 2)
+		argD = SigSpec();
+}
+endcode
+
+match ffrstmux
+	if !argD.empty()
+	select ffrstmux->type.in($mux)
+	index <SigSpec> port(ffrstmux, \Y) === argD
+
+	choice <IdString> BA {\B, \A}
+	// DSP48E1 only supports reset to zero
+	select port(ffrstmux, BA).is_fully_zero()
+
+	define <bool> pol (BA == \B)
+	set ffrstpol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffrstmux) {
+		dffrstmux = ffrstmux;
+		dffrstpol = ffrstpol;
+		argD = port(ffrstmux, ffrstpol ? \A : \B);
+		dffD.replace(port(ffrstmux, \Y), argD);
+
+		// Only search for ffcemux if argQ has at
+		//   least 3 users (ff, <upstream>, ffrstmux) and
+		//   dffD only has two (ff, ffrstmux)
+		if (!(nusers(argQ) >= 3 && nusers(dffD) == 2))
+			argD = SigSpec();
+	}
+	else
+		dffrstmux = nullptr;
+endcode
+
+match ffcemux
+	if !argD.empty()
+	select ffcemux->type.in($mux)
+	index <SigSpec> port(ffcemux, \Y) === argD
+	choice <IdString> AB {\A, \B}
+	index <SigSpec> port(ffcemux, AB) === argQ
+	define <bool> pol (AB == \A)
+	set ffcepol pol
+	semioptional
+endmatch
+
+code argD
+	if (ffcemux) {
+		dffcemux = ffcemux;
+		dffcepol = ffcepol;
+		argD = port(ffcemux, ffcepol ? \B : \A);
+		dffD.replace(port(ffcemux, \Y), argD);
+	}
+	else
+		dffcemux = nullptr;
+endcode

passes/pmgen/xilinx_srl.pmg

@@ -13,9 +13,9 @@ endcode
 match first
 	select first->type.in($_DFF_N_, $_DFF_P_, $_DFFE_NN_, $_DFFE_NP_, $_DFFE_PN_, $_DFFE_PP_, \FDRE, \FDRE_1)
 	select !first->has_keep_attr()
-	select !first->type.in(\FDRE) || !first->parameters.at(\IS_R_INVERTED, State::S0).as_bool()
+	select !first->type.in(\FDRE) || !param(first, \IS_R_INVERTED, State::S0).as_bool()
-	select !first->type.in(\FDRE) || !first->parameters.at(\IS_D_INVERTED, State::S0).as_bool()
+	select !first->type.in(\FDRE) || !param(first, \IS_D_INVERTED, State::S0).as_bool()
-	select !first->type.in(\FDRE, \FDRE_1) || first->connections_.at(\R, State::S0).is_fully_zero()
+	select !first->type.in(\FDRE, \FDRE_1) || port(first, \R, State::S0).is_fully_zero()
 	filter !non_first_cells.count(first)
 generate
 	SigSpec C = module->addWire(NEW_ID);
@@ -84,9 +84,9 @@ arg en_port
 match first
 	select first->type.in($_DFF_N_, $_DFF_P_, $_DFFE_NN_, $_DFFE_NP_, $_DFFE_PN_, $_DFFE_PP_, \FDRE, \FDRE_1)
 	select !first->has_keep_attr()
-	select !first->type.in(\FDRE) || !first->parameters.at(\IS_R_INVERTED, State::S0).as_bool()
+	select !first->type.in(\FDRE) || !param(first, \IS_R_INVERTED, State::S0).as_bool()
-	select !first->type.in(\FDRE) || !first->parameters.at(\IS_D_INVERTED, State::S0).as_bool()
+	select !first->type.in(\FDRE) || !param(first, \IS_D_INVERTED, State::S0).as_bool()
-	select !first->type.in(\FDRE, \FDRE_1) || first->connections_.at(\R, State::S0).is_fully_zero()
+	select !first->type.in(\FDRE, \FDRE_1) || port(first, \R, State::S0).is_fully_zero()
 endmatch
 
 code clk_port en_port
@@ -111,10 +111,10 @@ match next
 	index <SigBit> port(next, \Q) === port(first, \D)
 	filter port(next, clk_port) == port(first, clk_port)
 	filter en_port == IdString() || port(next, en_port) == port(first, en_port)
-	filter !first->type.in(\FDRE) || next->parameters.at(\IS_C_INVERTED, State::S0).as_bool() == first->parameters.at(\IS_C_INVERTED, State::S0).as_bool()
+	filter !first->type.in(\FDRE) || param(next, \IS_C_INVERTED, State::S0).as_bool() == param(first, \IS_C_INVERTED, State::S0).as_bool()
-	filter !first->type.in(\FDRE) || next->parameters.at(\IS_D_INVERTED, State::S0).as_bool() == first->parameters.at(\IS_D_INVERTED, State::S0).as_bool()
+	filter !first->type.in(\FDRE) || param(next, \IS_D_INVERTED, State::S0).as_bool() == param(first, \IS_D_INVERTED, State::S0).as_bool()
-	filter !first->type.in(\FDRE) || next->parameters.at(\IS_R_INVERTED, State::S0).as_bool() == first->parameters.at(\IS_R_INVERTED, State::S0).as_bool()
+	filter !first->type.in(\FDRE) || param(next, \IS_R_INVERTED, State::S0).as_bool() == param(first, \IS_R_INVERTED, State::S0).as_bool()
-	filter !first->type.in(\FDRE, \FDRE_1) || next->connections_.at(\R, State::S0).is_fully_zero()
+	filter !first->type.in(\FDRE, \FDRE_1) || port(next, \R, State::S0).is_fully_zero()
 endmatch
 
 code
@@ -138,10 +138,10 @@ match next
 	index <SigBit> port(next, \Q) === port(chain.back(), \D)
 	filter port(next, clk_port) == port(first, clk_port)
 	filter en_port == IdString() || port(next, en_port) == port(first, en_port)
-	filter !first->type.in(\FDRE) || next->parameters.at(\IS_C_INVERTED, State::S0).as_bool() == first->parameters.at(\IS_C_INVERTED, State::S0).as_bool()
+	filter !first->type.in(\FDRE) || param(next, \IS_C_INVERTED, State::S0).as_bool() == param(first, \IS_C_INVERTED, State::S0).as_bool()
-	filter !first->type.in(\FDRE) || next->parameters.at(\IS_D_INVERTED, State::S0).as_bool() == first->parameters.at(\IS_D_INVERTED, State::S0).as_bool()
+	filter !first->type.in(\FDRE) || param(next, \IS_D_INVERTED, State::S0).as_bool() == param(first, \IS_D_INVERTED, State::S0).as_bool()
-	filter !first->type.in(\FDRE) || next->parameters.at(\IS_R_INVERTED, State::S0).as_bool() == first->parameters.at(\IS_R_INVERTED, State::S0).as_bool()
+	filter !first->type.in(\FDRE) || param(next, \IS_R_INVERTED, State::S0).as_bool() == param(first, \IS_R_INVERTED, State::S0).as_bool()
-	filter !first->type.in(\FDRE, \FDRE_1) || next->connections_.at(\R, State::S0).is_fully_zero()
+	filter !first->type.in(\FDRE, \FDRE_1) || port(next, \R, State::S0).is_fully_zero()
 generate
 	Cell *cell = module->addCell(NEW_ID, chain.back()->type);
 	cell->setPort(\C, chain.back()->getPort(\C));
@@ -149,7 +149,7 @@ generate
 	cell->setPort(\Q, chain.back()->getPort(\D));
 	if (cell->type == \FDRE) {
 		if (rng(2) == 0)
-			cell->setPort(\R, chain.back()->connections_.at(\R, State::S0));
+			cell->setPort(\R, port(chain.back(), \R, State::S0));
 		cell->setPort(\CE, chain.back()->getPort(\CE));
 	}
 	else if (cell->type.begins_with("$_DFFE_"))

passes/techmap/abc9.cc

@@ -553,7 +553,6 @@ void abc9_module(RTLIL::Design *design, RTLIL::Module *current_module, std::stri
 				existing_cell = module->cell(mapped_cell->name);
 				log_assert(existing_cell);
 				cell = module->addCell(remap_name(mapped_cell->name), mapped_cell->type);
-				module->swap_names(cell, existing_cell);
 			}
 
 			if (markgroups) cell->attributes[ID(abcgroup)] = map_autoidx;
@@ -594,8 +593,22 @@ void abc9_module(RTLIL::Design *design, RTLIL::Module *current_module, std::stri
 			}
 		}
 
-		for (auto cell : boxes)
+		for (auto existing_cell : boxes) {
-			module->remove(cell);
+			Cell *cell = module->cell(remap_name(existing_cell->name));
+			if (cell) {
+				for (auto &conn : existing_cell->connections()) {
+					if (!conn.second.is_wire())
+						continue;
+					Wire *wire = conn.second.as_wire();
+					if (!wire->get_bool_attribute(ID(abc_padding)))
+						continue;
+					cell->unsetPort(conn.first);
+					log_debug("Dropping padded port connection for %s (%s) .%s (%s )\n", log_id(cell), cell->type.c_str(), log_id(conn.first), log_signal(conn.second));
+				}
+				module->swap_names(cell, existing_cell);
+			}
+			module->remove(existing_cell);
+		}
 
 		// Copy connections (and rename) from mapped_mod to module
 		for (auto conn : mapped_mod->connections()) {

passes/tests/test_autotb.cc

@@ -351,6 +351,11 @@ struct TestAutotbBackend : public Backend {
 		log("    -n <int>\n");
 		log("        number of iterations the test bench should run (default = 1000)\n");
 		log("\n");
+		log("    -seed <int>\n");
+		log("        seed used for pseudo-random number generation (default = 0).\n");
+		log("        a value of 0 will cause an arbitrary seed to be chosen, based on\n");
+		log("        the current system time.\n");
+		log("\n");
 	}
 	void execute(std::ostream *&f, std::string filename, std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
 	{

techlibs/common/Makefile.inc

@@ -28,4 +28,5 @@ $(eval $(call add_share_file,share,techlibs/common/dff2ff.v))
 $(eval $(call add_share_file,share,techlibs/common/gate2lut.v))
 $(eval $(call add_share_file,share,techlibs/common/cmp2lut.v))
 $(eval $(call add_share_file,share,techlibs/common/cells.lib))
+$(eval $(call add_share_file,share,techlibs/common/mul2dsp.v))
 $(eval $(call add_share_file,share,techlibs/common/dummy.box))

techlibs/common/mul2dsp.v

@@ -0,0 +1,296 @@
+/*
+ *  yosys -- Yosys Open SYnthesis Suite
+ *
+ *  Copyright (C) 2012  Clifford Wolf <clifford@clifford.at>
+ *                2019  Eddie Hung    <eddie@fpgeh.com>
+ *                2019  David Shah    <dave@ds0.me>
+ *
+ *  Permission to use, copy, modify, and/or distribute this software for any
+ *  purpose with or without fee is hereby granted, provided that the above
+ *  copyright notice and this permission notice appear in all copies.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ *  WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ *  ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ *  WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ *  ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ *  OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ *  ---
+ *
+ *  Tech-mapping rules for decomposing arbitrarily-sized $mul cells
+ *  into an equivalent collection of smaller `DSP_NAME cells (with the 
+ *  same interface as $mul) no larger than `DSP_[AB]_MAXWIDTH, attached 
+ *  to $shl and $add cells.
+ *
+ */
+
+`ifndef DSP_A_MAXWIDTH
+$fatal(1, "Macro DSP_A_MAXWIDTH must be defined");
+`endif
+`ifndef DSP_B_MAXWIDTH
+$fatal(1, "Macro DSP_B_MAXWIDTH must be defined");
+`endif
+`ifndef DSP_B_MAXWIDTH
+$fatal(1, "Macro DSP_B_MAXWIDTH must be defined");
+`endif
+`ifndef DSP_A_MAXWIDTH_PARTIAL
+`define DSP_A_MAXWIDTH_PARTIAL `DSP_A_MAXWIDTH
+`endif
+`ifndef DSP_B_MAXWIDTH_PARTIAL
+`define DSP_B_MAXWIDTH_PARTIAL `DSP_B_MAXWIDTH
+`endif
+
+`ifndef DSP_NAME
+$fatal(1, "Macro DSP_NAME must be defined");
+`endif
+
+`define MAX(a,b) (a > b ? a : b)
+`define MIN(a,b) (a < b ? a : b)
+
+(* techmap_celltype = "$mul $__mul" *)
+module _80_mul (A, B, Y);
+	parameter A_SIGNED = 0;
+	parameter B_SIGNED = 0;
+	parameter A_WIDTH = 1;
+	parameter B_WIDTH = 1;
+	parameter Y_WIDTH = 1;
+
+	input [A_WIDTH-1:0] A;
+	input [B_WIDTH-1:0] B;
+	output [Y_WIDTH-1:0] Y;
+
+	parameter _TECHMAP_CELLTYPE_ = "";
+
+	generate
+	if (0) begin end
+`ifdef DSP_A_MINWIDTH
+	else if (A_WIDTH < `DSP_A_MINWIDTH)
+		wire _TECHMAP_FAIL_ = 1;
+`endif
+`ifdef DSP_B_MINWIDTH
+	else if (B_WIDTH < `DSP_B_MINWIDTH)
+		wire _TECHMAP_FAIL_ = 1;
+`endif
+`ifdef DSP_Y_MINWIDTH
+	else if (Y_WIDTH < `DSP_Y_MINWIDTH)
+		wire _TECHMAP_FAIL_ = 1;
+`endif
+`ifdef DSP_SIGNEDONLY
+	else if (_TECHMAP_CELLTYPE_ == "$mul" && !A_SIGNED && !B_SIGNED)
+		\$mul #(
+			.A_SIGNED(1),
+			.B_SIGNED(1),
+			.A_WIDTH(A_WIDTH + 1),
+			.B_WIDTH(B_WIDTH + 1),
+			.Y_WIDTH(Y_WIDTH)
+		) _TECHMAP_REPLACE_ (
+			.A({1'b0, A}),
+			.B({1'b0, B}),
+			.Y(Y)
+		);
+`endif
+	else if (_TECHMAP_CELLTYPE_ == "$mul" && A_WIDTH < B_WIDTH)
+		\$mul #(
+			.A_SIGNED(B_SIGNED),
+			.B_SIGNED(A_SIGNED),
+			.A_WIDTH(B_WIDTH),
+			.B_WIDTH(A_WIDTH),
+			.Y_WIDTH(Y_WIDTH)
+		) _TECHMAP_REPLACE_ (
+			.A(B),
+			.B(A),
+			.Y(Y)
+		);
+	else begin
+		wire [1023:0] _TECHMAP_DO_ = "proc; clean";
+
+`ifdef DSP_SIGNEDONLY
+		localparam sign_headroom = 1;
+`else
+		localparam sign_headroom = 0;
+`endif
+
+		genvar i;
+		if (A_WIDTH > `DSP_A_MAXWIDTH) begin
+			localparam n = (A_WIDTH-`DSP_A_MAXWIDTH+`DSP_A_MAXWIDTH_PARTIAL-sign_headroom-1) / (`DSP_A_MAXWIDTH_PARTIAL-sign_headroom);
+			localparam partial_Y_WIDTH = `MIN(Y_WIDTH, B_WIDTH+`DSP_A_MAXWIDTH_PARTIAL);
+			localparam last_A_WIDTH = A_WIDTH-n*(`DSP_A_MAXWIDTH_PARTIAL-sign_headroom);
+			localparam last_Y_WIDTH = B_WIDTH+last_A_WIDTH;
+			if (A_SIGNED && B_SIGNED) begin
+				wire signed [partial_Y_WIDTH-1:0] partial [n-1:0];
+				wire signed [last_Y_WIDTH-1:0] last_partial;
+				wire signed [Y_WIDTH-1:0] partial_sum [n:0];
+			end
+			else begin
+				wire [partial_Y_WIDTH-1:0] partial [n-1:0];
+				wire [last_Y_WIDTH-1:0] last_partial;
+				wire [Y_WIDTH-1:0] partial_sum [n:0];
+			end
+
+			for (i = 0; i < n; i=i+1) begin:sliceA
+				\$__mul #(
+					.A_SIGNED(sign_headroom),
+					.B_SIGNED(B_SIGNED),
+					.A_WIDTH(`DSP_A_MAXWIDTH_PARTIAL),
+					.B_WIDTH(B_WIDTH),
+					.Y_WIDTH(partial_Y_WIDTH)
+				) mul (
+					.A({{sign_headroom{1'b0}}, A[i*(`DSP_A_MAXWIDTH_PARTIAL-sign_headroom) +: `DSP_A_MAXWIDTH_PARTIAL-sign_headroom]}),
+					.B(B),
+					.Y(partial[i])
+				);
+				// TODO: Currently a 'cascade' approach to summing the partial
+				//       products is taken here, but a more efficient 'binary
+				//       reduction' approach also exists...
+				if (i == 0)
+					assign partial_sum[i] = partial[i];
+				else
+					assign partial_sum[i] = (partial[i] << (* mul2dsp *) i*(`DSP_A_MAXWIDTH_PARTIAL-sign_headroom)) + (* mul2dsp *) partial_sum[i-1];
+			end
+
+			\$__mul #(
+				.A_SIGNED(A_SIGNED),
+				.B_SIGNED(B_SIGNED),
+				.A_WIDTH(last_A_WIDTH),
+				.B_WIDTH(B_WIDTH),
+				.Y_WIDTH(last_Y_WIDTH)
+			) sliceA.last (
+				.A(A[A_WIDTH-1 -: last_A_WIDTH]),
+				.B(B),
+				.Y(last_partial)
+			);
+			assign partial_sum[n] = (last_partial << (* mul2dsp *) n*(`DSP_A_MAXWIDTH_PARTIAL-sign_headroom)) + (* mul2dsp *) partial_sum[n-1];
+			assign Y = partial_sum[n];
+		end
+		else if (B_WIDTH > `DSP_B_MAXWIDTH) begin
+			localparam n = (B_WIDTH-`DSP_B_MAXWIDTH+`DSP_B_MAXWIDTH_PARTIAL-sign_headroom-1) / (`DSP_B_MAXWIDTH_PARTIAL-sign_headroom);
+			localparam partial_Y_WIDTH = `MIN(Y_WIDTH, A_WIDTH+`DSP_B_MAXWIDTH_PARTIAL);
+			localparam last_B_WIDTH = B_WIDTH-n*(`DSP_B_MAXWIDTH_PARTIAL-sign_headroom);
+			localparam last_Y_WIDTH = A_WIDTH+last_B_WIDTH;
+			if (A_SIGNED && B_SIGNED) begin
+				wire signed [partial_Y_WIDTH-1:0] partial [n-1:0];
+				wire signed [last_Y_WIDTH-1:0] last_partial;
+				wire signed [Y_WIDTH-1:0] partial_sum [n:0];
+			end
+			else begin
+				wire [partial_Y_WIDTH-1:0] partial [n-1:0];
+				wire [last_Y_WIDTH-1:0] last_partial;
+				wire [Y_WIDTH-1:0] partial_sum [n:0];
+			end
+
+			for (i = 0; i < n; i=i+1) begin:sliceB
+				\$__mul #(
+					.A_SIGNED(A_SIGNED),
+					.B_SIGNED(sign_headroom),
+					.A_WIDTH(A_WIDTH),
+					.B_WIDTH(`DSP_B_MAXWIDTH_PARTIAL),
+					.Y_WIDTH(partial_Y_WIDTH)
+				) mul (
+					.A(A),
+					.B({{sign_headroom{1'b0}}, B[i*(`DSP_B_MAXWIDTH_PARTIAL-sign_headroom) +: `DSP_B_MAXWIDTH_PARTIAL-sign_headroom]}),
+					.Y(partial[i])
+				);
+				// TODO: Currently a 'cascade' approach to summing the partial
+				//       products is taken here, but a more efficient 'binary
+				//       reduction' approach also exists...
+				if (i == 0)
+					assign partial_sum[i] = partial[i];
+				else
+					assign partial_sum[i] = (partial[i] << (* mul2dsp *) i*(`DSP_B_MAXWIDTH_PARTIAL-sign_headroom)) + (* mul2dsp *) partial_sum[i-1];
+			end
+
+			\$__mul #(
+				.A_SIGNED(A_SIGNED),
+				.B_SIGNED(B_SIGNED),
+				.A_WIDTH(A_WIDTH),
+				.B_WIDTH(last_B_WIDTH),
+				.Y_WIDTH(last_Y_WIDTH)
+			) mul_sliceB_last (
+				.A(A),
+				.B(B[B_WIDTH-1 -: last_B_WIDTH]),
+				.Y(last_partial)
+			);
+			assign partial_sum[n] = (last_partial << (* mul2dsp *) n*(`DSP_B_MAXWIDTH_PARTIAL-sign_headroom)) + (* mul2dsp *) partial_sum[n-1];
+			assign Y = partial_sum[n];
+		end
+		else begin
+			if (A_SIGNED)
+				wire signed [`DSP_A_MAXWIDTH-1:0] Aext = $signed(A);
+			else
+				wire [`DSP_A_MAXWIDTH-1:0] Aext = A;
+			if (B_SIGNED)
+				wire signed [`DSP_B_MAXWIDTH-1:0] Bext = $signed(B);
+			else
+				wire [`DSP_B_MAXWIDTH-1:0] Bext = B;
+
+			`DSP_NAME #(
+				.A_SIGNED(A_SIGNED),
+				.B_SIGNED(B_SIGNED),
+				.A_WIDTH(`DSP_A_MAXWIDTH),
+				.B_WIDTH(`DSP_B_MAXWIDTH),
+				.Y_WIDTH(`MIN(Y_WIDTH,`DSP_A_MAXWIDTH+`DSP_B_MAXWIDTH)),
+			) _TECHMAP_REPLACE_ (
+				.A(Aext),
+				.B(Bext),
+				.Y(Y)
+			);
+		end
+	end
+	endgenerate
+endmodule
+
+(* techmap_celltype = "$mul $__mul" *)
+module _90_soft_mul (A, B, Y);
+	parameter A_SIGNED = 0;
+	parameter B_SIGNED = 0;
+	parameter A_WIDTH = 1;
+	parameter B_WIDTH = 1;
+	parameter Y_WIDTH = 1;
+
+	input [A_WIDTH-1:0] A;
+	input [B_WIDTH-1:0] B;
+	output [Y_WIDTH-1:0] Y;
+
+	// Indirection necessary since mapping
+	//   back to $mul will cause recursion
+	generate
+	if (A_SIGNED && !B_SIGNED)
+		\$__soft_mul #(
+			.A_SIGNED(A_SIGNED),
+			.B_SIGNED(1),
+			.A_WIDTH(A_WIDTH),
+			.B_WIDTH(B_WIDTH+1),
+			.Y_WIDTH(Y_WIDTH)
+		) _TECHMAP_REPLACE_ (
+			.A(A),
+			.B({1'b0,B}),
+			.Y(Y)
+		);
+	else if (!A_SIGNED && B_SIGNED)
+		\$__soft_mul #(
+			.A_SIGNED(1),
+			.B_SIGNED(B_SIGNED),
+			.A_WIDTH(A_WIDTH+1),
+			.B_WIDTH(B_WIDTH),
+			.Y_WIDTH(Y_WIDTH)
+		) _TECHMAP_REPLACE_ (
+			.A({1'b0,A}),
+			.B(B),
+			.Y(Y)
+		);
+	else
+		\$__soft_mul #(
+			.A_SIGNED(A_SIGNED),
+			.B_SIGNED(B_SIGNED),
+			.A_WIDTH(A_WIDTH),
+			.B_WIDTH(B_WIDTH),
+			.Y_WIDTH(Y_WIDTH)
+		) _TECHMAP_REPLACE_ (
+			.A(A),
+			.B(B),
+			.Y(Y)
+		);
+	endgenerate
+endmodule

techlibs/ecp5/Makefile.inc

@@ -13,6 +13,7 @@ $(eval $(call add_share_file,share/ecp5,techlibs/ecp5/brams_map.v))
 $(eval $(call add_share_file,share/ecp5,techlibs/ecp5/bram.txt))
 $(eval $(call add_share_file,share/ecp5,techlibs/ecp5/arith_map.v))
 $(eval $(call add_share_file,share/ecp5,techlibs/ecp5/latches_map.v))
+$(eval $(call add_share_file,share/ecp5,techlibs/ecp5/dsp_map.v))
 
 $(eval $(call add_share_file,share/ecp5,techlibs/ecp5/abc_map.v))
 $(eval $(call add_share_file,share/ecp5,techlibs/ecp5/abc_unmap.v))

techlibs/ecp5/dsp_map.v

@@ -0,0 +1,17 @@
+module \$__MUL18X18 (input [17:0] A, input [17:0] B, output [35:0] Y);
+
+	parameter A_WIDTH = 18;
+	parameter B_WIDTH = 18;
+	parameter Y_WIDTH = 36;
+	parameter A_SIGNED = 0;
+	parameter B_SIGNED = 0;
+
+	MULT18X18D _TECHMAP_REPLACE_ (
+		.A0(A[0]), .A1(A[1]), .A2(A[2]), .A3(A[3]), .A4(A[4]), .A5(A[5]), .A6(A[6]), .A7(A[7]), .A8(A[8]), .A9(A[9]), .A10(A[10]), .A11(A[11]), .A12(A[12]), .A13(A[13]), .A14(A[14]), .A15(A[15]), .A16(A[16]), .A17(A[17]),
+		.B0(B[0]), .B1(B[1]), .B2(B[2]), .B3(B[3]), .B4(B[4]), .B5(B[5]), .B6(B[6]), .B7(B[7]), .B8(B[8]), .B9(B[9]), .B10(B[10]), .B11(B[11]), .B12(B[12]), .B13(B[13]), .B14(B[14]), .B15(B[15]), .B16(B[16]), .B17(B[17]),
+		.C17(1'b0), .C16(1'b0), .C15(1'b0), .C14(1'b0), .C13(1'b0), .C12(1'b0), .C11(1'b0), .C10(1'b0), .C9(1'b0), .C8(1'b0), .C7(1'b0), .C6(1'b0), .C5(1'b0), .C4(1'b0), .C3(1'b0), .C2(1'b0), .C1(1'b0), .C0(1'b0),
+		.SIGNEDA(A_SIGNED), .SIGNEDB(B_SIGNED), .SOURCEA(1'b0), .SOURCEB(1'b0),
+
+		.P0(Y[0]), .P1(Y[1]), .P2(Y[2]), .P3(Y[3]), .P4(Y[4]), .P5(Y[5]), .P6(Y[6]), .P7(Y[7]), .P8(Y[8]), .P9(Y[9]), .P10(Y[10]), .P11(Y[11]), .P12(Y[12]), .P13(Y[13]), .P14(Y[14]), .P15(Y[15]), .P16(Y[16]), .P17(Y[17]), .P18(Y[18]), .P19(Y[19]), .P20(Y[20]), .P21(Y[21]), .P22(Y[22]), .P23(Y[23]), .P24(Y[24]), .P25(Y[25]), .P26(Y[26]), .P27(Y[27]), .P28(Y[28]), .P29(Y[29]), .P30(Y[30]), .P31(Y[31]), .P32(Y[32]), .P33(Y[33]), .P34(Y[34]), .P35(Y[35])
+	);
+endmodule

techlibs/ecp5/synth_ecp5.cc

@@ -89,6 +89,9 @@ struct SynthEcp5Pass : public ScriptPass
 		log("        generate an output netlist (and BLIF file) suitable for VPR\n");
 		log("        (this feature is experimental and incomplete)\n");
 		log("\n");
+		log("    -nodsp\n");
+		log("        do not map multipliers to MULT18X18D\n");
+		log("\n");
 		log("\n");
 		log("The following commands are executed by this synthesis command:\n");
 		help_script();
@@ -96,7 +99,7 @@ struct SynthEcp5Pass : public ScriptPass
 	}
 
 	string top_opt, blif_file, edif_file, json_file;
-	bool noccu2, nodffe, nobram, nolutram, nowidelut, flatten, retime, abc2, abc9, vpr;
+	bool noccu2, nodffe, nobram, nolutram, nowidelut, flatten, retime, abc2, abc9, nodsp, vpr;
 
 	void clear_flags() YS_OVERRIDE
 	{
@@ -114,6 +117,7 @@ struct SynthEcp5Pass : public ScriptPass
 		abc2 = false;
 		vpr = false;
 		abc9 = false;
+		nodsp = false;
 	}
 
 	void execute(std::vector<std::string> args, RTLIL::Design *design) YS_OVERRIDE
@@ -192,6 +196,10 @@ struct SynthEcp5Pass : public ScriptPass
 				abc9 = true;
 				continue;
 			}
+			if (args[argidx] == "-nodsp") {
+				nodsp = true;
+				continue;
+			}
 			break;
 		}
 		extra_args(args, argidx, design);
@@ -218,17 +226,34 @@ struct SynthEcp5Pass : public ScriptPass
 			run(stringf("hierarchy -check %s", help_mode ? "-top <top>" : top_opt.c_str()));
 		}
 
-		if (flatten && check_label("flatten", "(unless -noflatten)"))
-		{
-			run("proc");
-			run("flatten");
-			run("tribuf -logic");
-			run("deminout");
-		}
-
 		if (check_label("coarse"))
 		{
-			run("synth -run coarse");
+			run("proc");
+			if (flatten || help_mode)
+				run("flatten");
+			run("tribuf -logic");
+			run("deminout");
+			run("opt_expr");
+			run("opt_clean");
+			run("check");
+			run("opt");
+			run("wreduce");
+			run("peepopt");
+			run("opt_clean");
+			run("share");
+			run("techmap -map +/cmp2lut.v -D LUT_WIDTH=4");
+			run("opt_expr");
+			run("opt_clean");
+			if (!nodsp) {
+				run("techmap -map +/mul2dsp.v -map +/ecp5/dsp_map.v -D DSP_A_MAXWIDTH=18 -D DSP_B_MAXWIDTH=18  -D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2  -D DSP_NAME=$__MUL18X18", "(unless -nodsp)");
+				run("chtype -set $mul t:$__soft_mul", "(unless -nodsp)");
+			}
+			run("alumacc");
+			run("opt");
+			run("fsm");
+			run("opt -fast");
+			run("memory -nomap");
+			run("opt_clean");
 		}
 
 		if (!nobram && check_label("map_bram", "(skip if -nobram)"))

techlibs/ice40/Makefile.inc

@@ -27,6 +27,7 @@ $(eval $(call add_share_file,share/ice40,techlibs/ice40/cells_sim.v))
 $(eval $(call add_share_file,share/ice40,techlibs/ice40/latches_map.v))
 $(eval $(call add_share_file,share/ice40,techlibs/ice40/brams.txt))
 $(eval $(call add_share_file,share/ice40,techlibs/ice40/brams_map.v))
+$(eval $(call add_share_file,share/ice40,techlibs/ice40/dsp_map.v))
 $(eval $(call add_share_file,share/ice40,techlibs/ice40/abc_hx.box))
 $(eval $(call add_share_file,share/ice40,techlibs/ice40/abc_hx.lut))
 $(eval $(call add_share_file,share/ice40,techlibs/ice40/abc_lp.box))

techlibs/ice40/dsp_map.v

@@ -0,0 +1,34 @@
+module \$__MUL16X16 (input [15:0] A, input [15:0] B, output [31:0] Y);
+	parameter A_SIGNED = 0;
+	parameter B_SIGNED = 0;
+	parameter A_WIDTH = 0;
+	parameter B_WIDTH = 0;
+	parameter Y_WIDTH = 0;
+
+	SB_MAC16 #(
+		.NEG_TRIGGER(1'b0),
+		.C_REG(1'b0),
+		.A_REG(1'b0),
+		.B_REG(1'b0),
+		.D_REG(1'b0),
+		.TOP_8x8_MULT_REG(1'b0),
+		.BOT_8x8_MULT_REG(1'b0),
+		.PIPELINE_16x16_MULT_REG1(1'b0),
+		.PIPELINE_16x16_MULT_REG2(1'b0),
+		.TOPOUTPUT_SELECT(2'b11),
+		.TOPADDSUB_LOWERINPUT(2'b0),
+		.TOPADDSUB_UPPERINPUT(1'b0),
+		.TOPADDSUB_CARRYSELECT(2'b0),
+		.BOTOUTPUT_SELECT(2'b11),
+		.BOTADDSUB_LOWERINPUT(2'b0),
+		.BOTADDSUB_UPPERINPUT(1'b0),
+		.BOTADDSUB_CARRYSELECT(2'b0),
+		.MODE_8x8(1'b0),
+		.A_SIGNED(A_SIGNED),
+		.B_SIGNED(B_SIGNED)
+	) _TECHMAP_REPLACE_ (
+		.A(A),
+		.B(B),
+		.O(Y),
+	);
+endmodule

techlibs/ice40/synth_ice40.cc

@@ -272,8 +272,18 @@ struct SynthIce40Pass : public ScriptPass
 			run("techmap -map +/cmp2lut.v -D LUT_WIDTH=4");
 			run("opt_expr");
 			run("opt_clean");
-			if (help_mode || dsp)
+			if (help_mode || dsp) {
-				run("ice40_dsp", "(if -dsp)");
+				run("techmap -map +/mul2dsp.v -map +/ice40/dsp_map.v -D DSP_A_MAXWIDTH=16 -D DSP_B_MAXWIDTH=16 "
+						"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 -D DSP_Y_MINWIDTH=11 "
+						"-D DSP_NAME=$__MUL16X16", "(if -dsp)");
+				run("select a:mul2dsp", "              (if -dsp)");
+				run("setattr -unset mul2dsp", "        (if -dsp)");
+				run("opt_expr -fine", "                (if -dsp)");
+				run("wreduce", "                       (if -dsp)");
+				run("select -clear", "                 (if -dsp)");
+				run("ice40_dsp", "                     (if -dsp)");
+				run("chtype -set $mul t:$__soft_mul", "(if -dsp)");
+			}
 			run("alumacc");
 			run("opt");
 			run("fsm");

techlibs/xilinx/Makefile.inc

@@ -42,6 +42,7 @@ $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/xc6s_ff_map.v))
 $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/xc7_ff_map.v))
 $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/lut_map.v))
 $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/mux_map.v))
+$(eval $(call add_share_file,share/xilinx,techlibs/xilinx/dsp_map.v))
 
 $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/abc_map.v))
 $(eval $(call add_share_file,share/xilinx,techlibs/xilinx/abc_unmap.v))

techlibs/xilinx/abc_map.v

@@ -134,11 +134,11 @@ endmodule
 
 module RAM32X1D (
   output DPO, SPO,
-  input  D,
+  (* techmap_autopurge *) input  D,
-  input  WCLK,
+  (* techmap_autopurge *) input  WCLK,
-  input  WE,
+  (* techmap_autopurge *) input  WE,
-  input  A0, A1, A2, A3, A4,
+  (* techmap_autopurge *) input  A0, A1, A2, A3, A4,
-  input  DPRA0, DPRA1, DPRA2, DPRA3, DPRA4
+  (* techmap_autopurge *) input  DPRA0, DPRA1, DPRA2, DPRA3, DPRA4
 );
   parameter INIT = 32'h0;
   parameter IS_WCLK_INVERTED = 1'b0;
@@ -157,11 +157,11 @@ endmodule
 
 module RAM64X1D (
   output DPO, SPO,
-  input  D,
+  (* techmap_autopurge *) input  D,
-  input  WCLK,
+  (* techmap_autopurge *) input  WCLK,
-  input  WE,
+  (* techmap_autopurge *) input  WE,
-  input  A0, A1, A2, A3, A4, A5,
+  (* techmap_autopurge *) input  A0, A1, A2, A3, A4, A5,
-  input  DPRA0, DPRA1, DPRA2, DPRA3, DPRA4, DPRA5
+  (* techmap_autopurge *) input  DPRA0, DPRA1, DPRA2, DPRA3, DPRA4, DPRA5
 );
   parameter INIT = 64'h0;
   parameter IS_WCLK_INVERTED = 1'b0;
@@ -180,10 +180,10 @@ endmodule
 
 module RAM128X1D (
   output       DPO, SPO,
-  input        D,
+  (* techmap_autopurge *) input        D,
-  input        WCLK,
+  (* techmap_autopurge *) input        WCLK,
-  input        WE,
+  (* techmap_autopurge *) input        WE,
-  input  [6:0] A, DPRA
+  (* techmap_autopurge *) input  [6:0] A, DPRA
 );
   parameter INIT = 128'h0;
   parameter IS_WCLK_INVERTED = 1'b0;
@@ -202,7 +202,7 @@ endmodule
 
 module SRL16E (
   output Q,
-  input A0, A1, A2, A3, CE, CLK, D
+  (* techmap_autopurge *) input A0, A1, A2, A3, CE, CLK, D
 );
   parameter [15:0] INIT = 16'h0000;
   parameter [0:0] IS_CLK_INVERTED = 1'b0;
@@ -219,8 +219,8 @@ endmodule
 module SRLC32E (
   output Q,
   output Q31,
-  input [4:0] A,
+  (* techmap_autopurge *) input [4:0] A,
-  input CE, CLK, D
+  (* techmap_autopurge *) input CE, CLK, D
 );
   parameter [31:0] INIT = 32'h00000000;
   parameter [0:0] IS_CLK_INVERTED = 1'b0;
@@ -233,3 +233,327 @@ module SRLC32E (
   );
   \$__ABC_LUT6 q (.A(\$Q ), .S({1'b1, A}), .Y(Q));
 endmodule
+
+module DSP48E1 (
+    (* techmap_autopurge *) output [29:0] ACOUT,
+    (* techmap_autopurge *) output [17:0] BCOUT,
+    (* techmap_autopurge *) output reg CARRYCASCOUT,
+    (* techmap_autopurge *) output reg [3:0] CARRYOUT,
+    (* techmap_autopurge *) output reg MULTSIGNOUT,
+    (* techmap_autopurge *) output OVERFLOW,
+    (* techmap_autopurge *) output reg signed [47:0] P,
+    (* techmap_autopurge *) output PATTERNBDETECT,
+    (* techmap_autopurge *) output PATTERNDETECT,
+    (* techmap_autopurge *) output [47:0] PCOUT,
+    (* techmap_autopurge *) output UNDERFLOW,
+    (* techmap_autopurge *) input signed [29:0] A,
+    (* techmap_autopurge *) input [29:0] ACIN,
+    (* techmap_autopurge *) input [3:0] ALUMODE,
+    (* techmap_autopurge *) input signed [17:0] B,
+    (* techmap_autopurge *) input [17:0] BCIN,
+    (* techmap_autopurge *) input [47:0] C,
+    (* techmap_autopurge *) input CARRYCASCIN,
+    (* techmap_autopurge *) input CARRYIN,
+    (* techmap_autopurge *) input [2:0] CARRYINSEL,
+    (* techmap_autopurge *) input CEA1,
+    (* techmap_autopurge *) input CEA2,
+    (* techmap_autopurge *) input CEAD,
+    (* techmap_autopurge *) input CEALUMODE,
+    (* techmap_autopurge *) input CEB1,
+    (* techmap_autopurge *) input CEB2,
+    (* techmap_autopurge *) input CEC,
+    (* techmap_autopurge *) input CECARRYIN,
+    (* techmap_autopurge *) input CECTRL,
+    (* techmap_autopurge *) input CED,
+    (* techmap_autopurge *) input CEINMODE,
+    (* techmap_autopurge *) input CEM,
+    (* techmap_autopurge *) input CEP,
+    (* techmap_autopurge *) input CLK,
+    (* techmap_autopurge *) input [24:0] D,
+    (* techmap_autopurge *) input [4:0] INMODE,
+    (* techmap_autopurge *) input MULTSIGNIN,
+    (* techmap_autopurge *) input [6:0] OPMODE,
+    (* techmap_autopurge *) input [47:0] PCIN,
+    (* techmap_autopurge *) input RSTA,
+    (* techmap_autopurge *) input RSTALLCARRYIN,
+    (* techmap_autopurge *) input RSTALUMODE,
+    (* techmap_autopurge *) input RSTB,
+    (* techmap_autopurge *) input RSTC,
+    (* techmap_autopurge *) input RSTCTRL,
+    (* techmap_autopurge *) input RSTD,
+    (* techmap_autopurge *) input RSTINMODE,
+    (* techmap_autopurge *) input RSTM,
+    (* techmap_autopurge *) input RSTP
+);
+    parameter integer ACASCREG = 1;
+    parameter integer ADREG = 1;
+    parameter integer ALUMODEREG = 1;
+    parameter integer AREG = 1;
+    parameter AUTORESET_PATDET = "NO_RESET";
+    parameter A_INPUT = "DIRECT";
+    parameter integer BCASCREG = 1;
+    parameter integer BREG = 1;
+    parameter B_INPUT = "DIRECT";
+    parameter integer CARRYINREG = 1;
+    parameter integer CARRYINSELREG = 1;
+    parameter integer CREG = 1;
+    parameter integer DREG = 1;
+    parameter integer INMODEREG = 1;
+    parameter integer MREG = 1;
+    parameter integer OPMODEREG = 1;
+    parameter integer PREG = 1;
+    parameter SEL_MASK = "MASK";
+    parameter SEL_PATTERN = "PATTERN";
+    parameter USE_DPORT = "FALSE";
+    parameter USE_MULT = "MULTIPLY";
+    parameter USE_PATTERN_DETECT = "NO_PATDET";
+    parameter USE_SIMD = "ONE48";
+    parameter [47:0] MASK = 48'h3FFFFFFFFFFF;
+    parameter [47:0] PATTERN = 48'h000000000000;
+    parameter [3:0] IS_ALUMODE_INVERTED = 4'b0;
+    parameter [0:0] IS_CARRYIN_INVERTED = 1'b0;
+    parameter [0:0] IS_CLK_INVERTED = 1'b0;
+    parameter [4:0] IS_INMODE_INVERTED = 5'b0;
+    parameter [6:0] IS_OPMODE_INVERTED = 7'b0;
+
+    parameter _TECHMAP_CELLTYPE_ = "";
+    localparam techmap_guard = (_TECHMAP_CELLTYPE_ != "");
+
+`define DSP48E1_INST(__CELL__) """
+__CELL__ #(
+            .ACASCREG(ACASCREG),
+            .ADREG(ADREG),
+            .ALUMODEREG(ALUMODEREG),
+            .AREG(AREG),
+            .AUTORESET_PATDET(AUTORESET_PATDET),
+            .A_INPUT(A_INPUT),
+            .BCASCREG(BCASCREG),
+            .BREG(BREG),
+            .B_INPUT(B_INPUT),
+            .CARRYINREG(CARRYINREG),
+            .CARRYINSELREG(CARRYINSELREG),
+            .CREG(CREG),
+            .DREG(DREG),
+            .INMODEREG(INMODEREG),
+            .MREG(MREG),
+            .OPMODEREG(OPMODEREG),
+            .PREG(PREG),
+            .SEL_MASK(SEL_MASK),
+            .SEL_PATTERN(SEL_PATTERN),
+            .USE_DPORT(USE_DPORT),
+            .USE_MULT(USE_MULT),
+            .USE_PATTERN_DETECT(USE_PATTERN_DETECT),
+            .USE_SIMD(USE_SIMD),
+            .MASK(MASK),
+            .PATTERN(PATTERN),
+            .IS_ALUMODE_INVERTED(IS_ALUMODE_INVERTED),
+            .IS_CARRYIN_INVERTED(IS_CARRYIN_INVERTED),
+            .IS_CLK_INVERTED(IS_CLK_INVERTED),
+            .IS_INMODE_INVERTED(IS_INMODE_INVERTED),
+            .IS_OPMODE_INVERTED(IS_OPMODE_INVERTED)
+        ) _TECHMAP_REPLACE_ (
+            .ACOUT(ACOUT),
+            .BCOUT(BCOUT),
+            .CARRYCASCOUT(CARRYCASCOUT),
+            .CARRYOUT(CARRYOUT),
+            .MULTSIGNOUT(MULTSIGNOUT),
+            .OVERFLOW(OVERFLOW),
+            .P(oP),
+            .PATTERNBDETECT(PATTERNBDETECT),
+            .PATTERNDETECT(PATTERNDETECT),
+            .PCOUT(oPCOUT),
+            .UNDERFLOW(UNDERFLOW),
+            .A(iA),
+            .ACIN(ACIN),
+            .ALUMODE(ALUMODE),
+            .B(iB),
+            .BCIN(BCIN),
+            .C(iC),
+            .CARRYCASCIN(CARRYCASCIN),
+            .CARRYIN(CARRYIN),
+            .CARRYINSEL(CARRYINSEL),
+            .CEA1(CEA1),
+            .CEA2(CEA2),
+            .CEAD(CEAD),
+            .CEALUMODE(CEALUMODE),
+            .CEB1(CEB1),
+            .CEB2(CEB2),
+            .CEC(CEC),
+            .CECARRYIN(CECARRYIN),
+            .CECTRL(CECTRL),
+            .CED(CED),
+            .CEINMODE(CEINMODE),
+            .CEM(CEM),
+            .CEP(CEP),
+            .CLK(CLK),
+            .D(iD),
+            .INMODE(INMODE),
+            .MULTSIGNIN(MULTSIGNIN),
+            .OPMODE(OPMODE),
+            .PCIN(PCIN),
+            .RSTA(RSTA),
+            .RSTALLCARRYIN(RSTALLCARRYIN),
+            .RSTALUMODE(RSTALUMODE),
+            .RSTB(RSTB),
+            .RSTC(RSTC),
+            .RSTCTRL(RSTCTRL),
+            .RSTD(RSTD),
+            .RSTINMODE(RSTINMODE),
+            .RSTM(RSTM),
+            .RSTP(RSTP)
+        );
+"""
+
+    wire [29:0] iA;
+    wire [17:0] iB;
+    wire [47:0] iC;
+    wire [24:0] iD;
+
+    wire pA, pB, pC, pD, pAD, pM, pP;
+    wire [47:0] oP, mP;
+    wire [47:0] oPCOUT, mPCOUT;
+
+    generate
+    if (USE_MULT == "MULTIPLY" && USE_DPORT == "FALSE") begin
+        // Disconnect the A-input if MREG is enabled, since
+        //   combinatorial path is broken
+        if (AREG == 0 && MREG == 0 && PREG == 0)
+            assign iA = A, pA = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(30)) rA (.I(A), .O(iA), .Q(pA));
+        if (BREG == 0 && MREG == 0 && PREG == 0)
+            assign iB = B, pB = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(18)) rB (.I(B), .O(iB), .Q(pB));
+        if (CREG == 0 && PREG == 0)
+            assign iC = C, pC = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(48)) rC (.I(C), .O(iC), .Q(pC));
+        if (DREG == 0)
+            assign iD = D;
+        else if (techmap_guard)
+        $error("Invalid DSP48E1 configuration: DREG enabled but USE_DPORT == \"FALSE\"");
+        assign pD = 1'bx;
+        if (ADREG == 1 && techmap_guard)
+            $error("Invalid DSP48E1 configuration: ADREG enabled but USE_DPORT == \"FALSE\"");
+        assign pAD = 1'bx;
+    if (PREG == 0) begin
+        if (MREG == 1)
+        \$__ABC_REG rM (.Q(pM));
+        else
+        assign pM = 1'bx;
+        assign pP = 1'bx;
+    end else begin
+            assign pM = 1'bx;
+            \$__ABC_REG rP (.Q(pP));
+        end
+
+        if (MREG == 0 && PREG == 0)
+            assign mP = oP, mPCOUT = oPCOUT;
+        else
+            assign mP = 1'bx, mPCOUT = 1'bx;
+        \$__ABC_DSP48E1_MULT_P_MUX muxP (
+            .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .I(oP), .Mq(pM), .P(mP), .Pq(pP), .O(P)
+        );
+        \$__ABC_DSP48E1_MULT_PCOUT_MUX muxPCOUT (
+            .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .I(oPCOUT), .Mq(pM), .P(mPCOUT), .Pq(pP), .O(PCOUT)
+        );
+
+        `DSP48E1_INST(\$__ABC_DSP48E1_MULT )
+    end
+    else if (USE_MULT == "MULTIPLY" && USE_DPORT == "TRUE") begin
+        // Disconnect the A-input if MREG is enabled, since
+        //   combinatorial path is broken
+        if (AREG == 0 && ADREG == 0 && MREG == 0 && PREG == 0)
+            assign iA = A, pA = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(30)) rA (.I(A), .O(iA), .Q(pA));
+        if (BREG == 0 && MREG == 0 && PREG == 0)
+            assign iB = B, pB = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(18)) rB (.I(B), .O(iB), .Q(pB));
+        if (CREG == 0 && PREG == 0)
+            assign iC = C, pC = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(48)) rC (.I(C), .O(iC), .Q(pC));
+        if (DREG == 0 && ADREG == 0)
+            assign iD = D, pD = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(25)) rD (.I(D), .O(iD), .Q(pD));
+        if (PREG == 0) begin
+            if (MREG == 1) begin
+                assign pAD = 1'bx;
+        \$__ABC_REG rM (.Q(pM));
+            end else begin
+                if (ADREG == 1)
+                    \$__ABC_REG rAD (.Q(pAD));
+                else
+                    assign pAD = 1'bx;
+        assign pM = 1'bx;
+        end
+        assign pP = 1'bx;
+    end else begin
+            assign pAD = 1'bx, pM = 1'bx;
+            \$__ABC_REG rP (.Q(pP));
+        end
+
+        if (MREG == 0 && PREG == 0)
+            assign mP = oP, mPCOUT = oPCOUT;
+        else
+            assign mP = 1'bx, mPCOUT = 1'bx;
+        \$__ABC_DSP48E1_MULT_DPORT_P_MUX muxP (
+            .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .I(oP), .Mq(pM), .P(mP), .Pq(pP), .O(P)
+        );
+        \$__ABC_DSP48E1_MULT_DPORT_PCOUT_MUX muxPCOUT (
+            .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .I(oPCOUT), .Mq(pM), .P(mPCOUT), .Pq(pP), .O(PCOUT)
+        );
+
+        `DSP48E1_INST(\$__ABC_DSP48E1_MULT_DPORT )
+    end
+    else if (USE_MULT == "NONE" && USE_DPORT == "FALSE") begin
+        // Disconnect the A-input if MREG is enabled, since
+        //   combinatorial path is broken
+        if (AREG == 0 && PREG == 0)
+            assign iA = A, pA = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(30)) rA (.I(A), .O(iA), .Q(pA));
+        if (BREG == 0 && PREG == 0)
+            assign iB = B, pB = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(18)) rB (.I(B), .O(iB), .Q(pB));
+        if (CREG == 0 && PREG == 0)
+            assign iC = C, pC = 1'bx;
+        else
+            \$__ABC_REG #(.WIDTH(48)) rC (.I(C), .O(iC), .Q(pC));
+        if (DREG == 1 && techmap_guard)
+            $error("Invalid DSP48E1 configuration: DREG enabled but USE_DPORT == \"FALSE\"");
+        assign pD = 1'bx;
+        if (ADREG == 1 && techmap_guard)
+            $error("Invalid DSP48E1 configuration: ADREG enabled but USE_DPORT == \"FALSE\"");
+        assign pAD = 1'bx;
+        if (MREG == 1 && techmap_guard)
+            $error("Invalid DSP48E1 configuration: MREG enabled but USE_MULT == \"NONE\"");
+        assign pM = 1'bx;
+        if (PREG == 1)
+            \$__ABC_REG rP (.Q(pP));
+        else
+            assign pP = 1'bx;
+
+        if (MREG == 0 && PREG == 0)
+            assign mP = oP, mPCOUT = oPCOUT;
+        else
+            assign mP = 1'bx, mPCOUT = 1'bx;
+        \$__ABC_DSP48E1_P_MUX muxP (
+            .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .I(oP), .Mq(pM), .P(mP), .Pq(pP), .O(P)
+        );
+        \$__ABC_DSP48E1_PCOUT_MUX muxPCOUT (
+            .Aq(pA), .Bq(pB), .Cq(pC), .Dq(pD), .ADq(pAD), .I(oPCOUT), .Mq(pM), .P(mPCOUT), .Pq(pP), .O(PCOUT)
+        );
+
+        `DSP48E1_INST(\$__ABC_DSP48E1 )
+    end
+    else
+        $error("Invalid DSP48E1 configuration");
+    endgenerate
+    `undef DSP48E1_INST
+endmodule

techlibs/xilinx/abc_model.v

@@ -20,6 +20,10 @@
 
 // ============================================================================
 
+// Box containing MUXF7.[AB] + MUXF8,
+//   Necessary to make these an atomic unit so that
+//   ABC cannot optimise just one of the MUXF7 away
+//   and expect to save on its delay
 (* abc_box_id = 3, lib_whitebox *)
 module \$__XILINX_MUXF78 (output O, input I0, I1, I2, I3, S0, S1);
   assign O = S1 ? (S0 ? I3 : I2)
@@ -31,4 +35,162 @@ endmodule
 
 (* abc_box_id = 1000 *)
 module \$__ABC_ASYNC (input A, S, output Y);
+
+// Box to emulate comb/seq behaviour of RAMD{32,64} and SRL{16,32}
+//   Necessary since RAMD* and SRL* have both combinatorial (i.e.
+//   same-cycle read operation) and sequential (write operation
+//   is only committed on the next clock edge).
+//   To model the combinatorial path, such cells have to be split
+//   into comb and seq parts, with this box modelling only the former.
+(* abc_box_id=2000 *)
+module \$__ABC_LUT6 (input A, input [5:0] S, output Y);
 endmodule
+// Box to emulate comb/seq behaviour of RAMD128
+(* abc_box_id=2001 *)
+module \$__ABC_LUT7 (input A, input [6:0] S, output Y);
+endmodule
+
+
+// Modules used to model the comb/seq behaviour of DSP48E1
+//   With abc_map.v responsible for splicing the below modules
+//   between the combinatorial DSP48E1 box (e.g. disconnecting
+//   A when AREG, MREG or PREG is enabled and splicing in the
+//   "$__ABC_DSP48E1_REG" blackbox as "REG" in the diagram below)
+//   this acts to first disables the combinatorial path (as there
+//   is no connectivity through REG), and secondly, since this is
+//   blackbox a new PI will be introduced with an arrival time of
+//   zero.
+//   Note: Since these "$__ABC_DSP48E1_REG" modules are of a
+//   sequential nature, they are not passed as a box to ABC and
+//   (desirably) represented as PO/PIs.
+//
+//   At the DSP output, we place a blackbox mux ("M" in the diagram
+//   below) to capture the fact that the critical-path could come
+//   from any one of its inputs.
+//   In contrast to "REG", the "$__ABC_DSP48E1_*_MUX" modules are
+//   combinatorial blackboxes that do get passed to ABC.
+//   The propagation delay through this box (specified in the box
+//   file) captures the arrival time of the register (i.e.
+//   propagation from AREG to P after clock edge), or zero delay
+//   for the combinatorial path from the DSP.
+//
+//   Doing so should means that ABC is able to analyse the
+//   worst-case delay through to P, regardless of if it was
+//   through any combinatorial paths (e.g. B, below) or an
+//   internal register (A2REG).
+//   However, the true value of being as complete as this is
+//   questionable since if AREG=1 and BREG=0 (as below)
+//   then the worse-case path would very likely be through B
+//   and very unlikely to be through AREG.Q...?
+//
+//   In graphical form:
+//
+//                 +-----+
+//         +------>> REG >>----+
+//         |       +-----+     |
+//         |                   |
+//         |    +---------+    |   __
+//    A >>-+X X-|         |    +--|  \
+//              | DSP48E1 |P      | M |--->> P
+//              | AREG=1  |-------|__/
+//    B >>------|         |
+//              +---------+
+//
+`define ABC_DSP48E1_MUX(__NAME__) """
+module __NAME__ (input Aq, ADq, Bq, Cq, Dq, input [47:0] I, input Mq, input [47:0] P, input Pq, output [47:0] O);
+endmodule
+"""
+(* abc_box_id=2100 *) `ABC_DSP48E1_MUX(\$__ABC_DSP48E1_MULT_P_MUX )
+(* abc_box_id=2101 *) `ABC_DSP48E1_MUX(\$__ABC_DSP48E1_MULT_PCOUT_MUX )
+(* abc_box_id=2102 *) `ABC_DSP48E1_MUX(\$__ABC_DSP48E1_MULT_DPORT_P_MUX )
+(* abc_box_id=2103 *) `ABC_DSP48E1_MUX(\$__ABC_DSP48E1_MULT_DPORT_PCOUT_MUX )
+(* abc_box_id=2104 *) `ABC_DSP48E1_MUX(\$__ABC_DSP48E1_P_MUX )
+(* abc_box_id=2105 *) `ABC_DSP48E1_MUX(\$__ABC_DSP48E1_PCOUT_MUX )
+
+`define ABC_DSP48E1(__NAME__) """
+module __NAME__ (
+    output [29:0] ACOUT,
+    output [17:0] BCOUT,
+    output reg CARRYCASCOUT,
+    output reg [3:0] CARRYOUT,
+    output reg MULTSIGNOUT,
+    output OVERFLOW,
+    output reg signed [47:0] P,
+    output PATTERNBDETECT,
+    output PATTERNDETECT,
+    output [47:0] PCOUT,
+    output UNDERFLOW,
+    input signed [29:0] A,
+    input [29:0] ACIN,
+    input [3:0] ALUMODE,
+    input signed [17:0] B,
+    input [17:0] BCIN,
+    input [47:0] C,
+    input CARRYCASCIN,
+    input CARRYIN,
+    input [2:0] CARRYINSEL,
+    input CEA1,
+    input CEA2,
+    input CEAD,
+    input CEALUMODE,
+    input CEB1,
+    input CEB2,
+    input CEC,
+    input CECARRYIN,
+    input CECTRL,
+    input CED,
+    input CEINMODE,
+    input CEM,
+    input CEP,
+    input CLK,
+    input [24:0] D,
+    input [4:0] INMODE,
+    input MULTSIGNIN,
+    input [6:0] OPMODE,
+    input [47:0] PCIN,
+    input RSTA,
+    input RSTALLCARRYIN,
+    input RSTALUMODE,
+    input RSTB,
+    input RSTC,
+    input RSTCTRL,
+    input RSTD,
+    input RSTINMODE,
+    input RSTM,
+    input RSTP
+);
+    parameter integer ACASCREG = 1;
+    parameter integer ADREG = 1;
+    parameter integer ALUMODEREG = 1;
+    parameter integer AREG = 1;
+    parameter AUTORESET_PATDET = "NO_RESET";
+    parameter A_INPUT = "DIRECT";
+    parameter integer BCASCREG = 1;
+    parameter integer BREG = 1;
+    parameter B_INPUT = "DIRECT";
+    parameter integer CARRYINREG = 1;
+    parameter integer CARRYINSELREG = 1;
+    parameter integer CREG = 1;
+    parameter integer DREG = 1;
+    parameter integer INMODEREG = 1;
+    parameter integer MREG = 1;
+    parameter integer OPMODEREG = 1;
+    parameter integer PREG = 1;
+    parameter SEL_MASK = "MASK";
+    parameter SEL_PATTERN = "PATTERN";
+    parameter USE_DPORT = "FALSE";
+    parameter USE_MULT = "MULTIPLY";
+    parameter USE_PATTERN_DETECT = "NO_PATDET";
+    parameter USE_SIMD = "ONE48";
+    parameter [47:0] MASK = 48'h3FFFFFFFFFFF;
+    parameter [47:0] PATTERN = 48'h000000000000;
+    parameter [3:0] IS_ALUMODE_INVERTED = 4'b0;
+    parameter [0:0] IS_CARRYIN_INVERTED = 1'b0;
+    parameter [0:0] IS_CLK_INVERTED = 1'b0;
+    parameter [4:0] IS_INMODE_INVERTED = 5'b0;
+    parameter [6:0] IS_OPMODE_INVERTED = 7'b0;
+endmodule
+"""
+(* abc_box_id=3000 *) `ABC_DSP48E1(\$__ABC_DSP48E1_MULT )
+(* abc_box_id=3001 *) `ABC_DSP48E1(\$__ABC_DSP48E1_MULT_DPORT )
+(* abc_box_id=3002 *) `ABC_DSP48E1(\$__ABC_DSP48E1 )

techlibs/xilinx/abc_unmap.v

@@ -27,3 +27,186 @@ endmodule
 module \$__ABC_FF_ (input D, output Q);
   assign Q = D;
 endmodule
+
+module \$__ABC_REG (input [WIDTH-1:0] I, output [WIDTH-1:0] O, output Q);
+  parameter WIDTH = 1;
+  assign O = I;
+endmodule
+(* techmap_celltype = "$__ABC_DSP48E1_MULT_P_MUX $__ABC_DSP48E1_MULT_PCOUT_MUX $__ABC_DSP48E1_MULT_DPORT_P_MUX $__ABC_DSP48E1_MULT_DPORT_PCOUT_MUX $__ABC_DSP48E1_P_MUX $__ABC_DSP48E1_PCOUT_MUX" *)
+module \$__ABC_DSP48E1_MUX (
+  input Aq, Bq, Cq, Dq, ADq,
+  input [47:0] I,
+  input Mq,
+  input [47:0] P, 
+  input Pq, 
+  output [47:0] O
+);
+  assign O = I;
+endmodule
+
+(* techmap_celltype = "$__ABC_DSP48E1_MULT $__ABC_DSP48E1_MULT_DPORT $__ABC_DSP48E1" *)
+module \$__ABC_DSP48E1 (
+    (* techmap_autopurge *) output [29:0] ACOUT,
+    (* techmap_autopurge *) output [17:0] BCOUT,
+    (* techmap_autopurge *) output reg CARRYCASCOUT,
+    (* techmap_autopurge *) output reg [3:0] CARRYOUT,
+    (* techmap_autopurge *) output reg MULTSIGNOUT,
+    (* techmap_autopurge *) output OVERFLOW,
+    (* techmap_autopurge *) output reg signed [47:0] P,
+    (* techmap_autopurge *) output PATTERNBDETECT,
+    (* techmap_autopurge *) output PATTERNDETECT,
+    (* techmap_autopurge *) output [47:0] PCOUT,
+    (* techmap_autopurge *) output UNDERFLOW,
+    (* techmap_autopurge *) input signed [29:0] A,
+    (* techmap_autopurge *) input [29:0] ACIN,
+    (* techmap_autopurge *) input [3:0] ALUMODE,
+    (* techmap_autopurge *) input signed [17:0] B,
+    (* techmap_autopurge *) input [17:0] BCIN,
+    (* techmap_autopurge *) input [47:0] C,
+    (* techmap_autopurge *) input CARRYCASCIN,
+    (* techmap_autopurge *) input CARRYIN,
+    (* techmap_autopurge *) input [2:0] CARRYINSEL,
+    (* techmap_autopurge *) input CEA1,
+    (* techmap_autopurge *) input CEA2,
+    (* techmap_autopurge *) input CEAD,
+    (* techmap_autopurge *) input CEALUMODE,
+    (* techmap_autopurge *) input CEB1,
+    (* techmap_autopurge *) input CEB2,
+    (* techmap_autopurge *) input CEC,
+    (* techmap_autopurge *) input CECARRYIN,
+    (* techmap_autopurge *) input CECTRL,
+    (* techmap_autopurge *) input CED,
+    (* techmap_autopurge *) input CEINMODE,
+    (* techmap_autopurge *) input CEM,
+    (* techmap_autopurge *) input CEP,
+    (* techmap_autopurge *) input CLK,
+    (* techmap_autopurge *) input [24:0] D,
+    (* techmap_autopurge *) input [4:0] INMODE,
+    (* techmap_autopurge *) input MULTSIGNIN,
+    (* techmap_autopurge *) input [6:0] OPMODE,
+    (* techmap_autopurge *) input [47:0] PCIN,
+    (* techmap_autopurge *) input RSTA,
+    (* techmap_autopurge *) input RSTALLCARRYIN,
+    (* techmap_autopurge *) input RSTALUMODE,
+    (* techmap_autopurge *) input RSTB,
+    (* techmap_autopurge *) input RSTC,
+    (* techmap_autopurge *) input RSTCTRL,
+    (* techmap_autopurge *) input RSTD,
+    (* techmap_autopurge *) input RSTINMODE,
+    (* techmap_autopurge *) input RSTM,
+    (* techmap_autopurge *) input RSTP
+);
+    parameter integer ACASCREG = 1;
+    parameter integer ADREG = 1;
+    parameter integer ALUMODEREG = 1;
+    parameter integer AREG = 1;
+    parameter AUTORESET_PATDET = "NO_RESET";
+    parameter A_INPUT = "DIRECT";
+    parameter integer BCASCREG = 1;
+    parameter integer BREG = 1;
+    parameter B_INPUT = "DIRECT";
+    parameter integer CARRYINREG = 1;
+    parameter integer CARRYINSELREG = 1;
+    parameter integer CREG = 1;
+    parameter integer DREG = 1;
+    parameter integer INMODEREG = 1;
+    parameter integer MREG = 1;
+    parameter integer OPMODEREG = 1;
+    parameter integer PREG = 1;
+    parameter SEL_MASK = "MASK";
+    parameter SEL_PATTERN = "PATTERN";
+    parameter USE_DPORT = "FALSE";
+    parameter USE_MULT = "MULTIPLY";
+    parameter USE_PATTERN_DETECT = "NO_PATDET";
+    parameter USE_SIMD = "ONE48";
+    parameter [47:0] MASK = 48'h3FFFFFFFFFFF;
+    parameter [47:0] PATTERN = 48'h000000000000;
+    parameter [3:0] IS_ALUMODE_INVERTED = 4'b0;
+    parameter [0:0] IS_CARRYIN_INVERTED = 1'b0;
+    parameter [0:0] IS_CLK_INVERTED = 1'b0;
+    parameter [4:0] IS_INMODE_INVERTED = 5'b0;
+    parameter [6:0] IS_OPMODE_INVERTED = 7'b0;
+
+    DSP48E1 #(
+        .ACASCREG(ACASCREG),
+        .ADREG(ADREG),
+        .ALUMODEREG(ALUMODEREG),
+        .AREG(AREG),
+        .AUTORESET_PATDET(AUTORESET_PATDET),
+        .A_INPUT(A_INPUT),
+        .BCASCREG(BCASCREG),
+        .BREG(BREG),
+        .B_INPUT(B_INPUT),
+        .CARRYINREG(CARRYINREG),
+        .CARRYINSELREG(CARRYINSELREG),
+        .CREG(CREG),
+        .DREG(DREG),
+        .INMODEREG(INMODEREG),
+        .MREG(MREG),
+        .OPMODEREG(OPMODEREG),
+        .PREG(PREG),
+        .SEL_MASK(SEL_MASK),
+        .SEL_PATTERN(SEL_PATTERN),
+        .USE_DPORT(USE_DPORT),
+        .USE_MULT(USE_MULT),
+        .USE_PATTERN_DETECT(USE_PATTERN_DETECT),
+        .USE_SIMD(USE_SIMD),
+        .MASK(MASK),
+        .PATTERN(PATTERN),
+        .IS_ALUMODE_INVERTED(IS_ALUMODE_INVERTED),
+        .IS_CARRYIN_INVERTED(IS_CARRYIN_INVERTED),
+        .IS_CLK_INVERTED(IS_CLK_INVERTED),
+        .IS_INMODE_INVERTED(IS_INMODE_INVERTED),
+        .IS_OPMODE_INVERTED(IS_OPMODE_INVERTED)
+    ) _TECHMAP_REPLACE_ (
+        .ACOUT(ACOUT),
+        .BCOUT(BCOUT),
+        .CARRYCASCOUT(CARRYCASCOUT),
+        .CARRYOUT(CARRYOUT),
+        .MULTSIGNOUT(MULTSIGNOUT),
+        .OVERFLOW(OVERFLOW),
+        .P(P),
+        .PATTERNBDETECT(PATTERNBDETECT),
+        .PATTERNDETECT(PATTERNDETECT),
+        .PCOUT(PCOUT),
+        .UNDERFLOW(UNDERFLOW),
+        .A(A),
+        .ACIN(ACIN),
+        .ALUMODE(ALUMODE),
+        .B(B),
+        .BCIN(BCIN),
+        .C(C),
+        .CARRYCASCIN(CARRYCASCIN),
+        .CARRYIN(CARRYIN),
+        .CARRYINSEL(CARRYINSEL),
+        .CEA1(CEA1),
+        .CEA2(CEA2),
+        .CEAD(CEAD),
+        .CEALUMODE(CEALUMODE),
+        .CEB1(CEB1),
+        .CEB2(CEB2),
+        .CEC(CEC),
+        .CECARRYIN(CECARRYIN),
+        .CECTRL(CECTRL),
+        .CED(CED),
+        .CEINMODE(CEINMODE),
+        .CEM(CEM),
+        .CEP(CEP),
+        .CLK(CLK),
+        .D(D),
+        .INMODE(INMODE),
+        .MULTSIGNIN(MULTSIGNIN),
+        .OPMODE(OPMODE),
+        .PCIN(PCIN),
+        .RSTA(RSTA),
+        .RSTALLCARRYIN(RSTALLCARRYIN),
+        .RSTALUMODE(RSTALUMODE),
+        .RSTB(RSTB),
+        .RSTC(RSTC),
+        .RSTCTRL(RSTCTRL),
+        .RSTD(RSTD),
+        .RSTINMODE(RSTINMODE),
+        .RSTM(RSTM),
+        .RSTP(RSTP)
+    );
+endmodule

techlibs/xilinx/cells_sim.v

@@ -725,3 +725,466 @@ module SRLC32E (
       always @(posedge CLK) if (CE) r <= { r[30:0], D };
   endgenerate
 endmodule
+
+module DSP48E1 (
+    output [29:0] ACOUT,
+    output [17:0] BCOUT,
+    output reg CARRYCASCOUT,
+    output reg [3:0] CARRYOUT,
+    output reg MULTSIGNOUT,
+    output OVERFLOW,
+    output reg signed [47:0] P,
+    output reg PATTERNBDETECT,
+    output reg PATTERNDETECT,
+    output [47:0] PCOUT,
+    output UNDERFLOW,
+    input signed [29:0] A,
+    input [29:0] ACIN,
+    input [3:0] ALUMODE,
+    input signed [17:0] B,
+    input [17:0] BCIN,
+    input [47:0] C,
+    input CARRYCASCIN,
+    input CARRYIN,
+    input [2:0] CARRYINSEL,
+    input CEA1,
+    input CEA2,
+    input CEAD,
+    input CEALUMODE,
+    input CEB1,
+    input CEB2,
+    input CEC,
+    input CECARRYIN,
+    input CECTRL,
+    input CED,
+    input CEINMODE,
+    input CEM,
+    input CEP,
+    (* clkbuf_sink *) input CLK,
+    input [24:0] D,
+    input [4:0] INMODE,
+    input MULTSIGNIN,
+    input [6:0] OPMODE,
+    input [47:0] PCIN,
+    input RSTA,
+    input RSTALLCARRYIN,
+    input RSTALUMODE,
+    input RSTB,
+    input RSTC,
+    input RSTCTRL,
+    input RSTD,
+    input RSTINMODE,
+    input RSTM,
+    input RSTP
+);
+    parameter integer ACASCREG = 1;
+    parameter integer ADREG = 1;
+    parameter integer ALUMODEREG = 1;
+    parameter integer AREG = 1;
+    parameter AUTORESET_PATDET = "NO_RESET";
+    parameter A_INPUT = "DIRECT";
+    parameter integer BCASCREG = 1;
+    parameter integer BREG = 1;
+    parameter B_INPUT = "DIRECT";
+    parameter integer CARRYINREG = 1;
+    parameter integer CARRYINSELREG = 1;
+    parameter integer CREG = 1;
+    parameter integer DREG = 1;
+    parameter integer INMODEREG = 1;
+    parameter integer MREG = 1;
+    parameter integer OPMODEREG = 1;
+    parameter integer PREG = 1;
+    parameter SEL_MASK = "MASK";
+    parameter SEL_PATTERN = "PATTERN";
+    parameter USE_DPORT = "FALSE";
+    parameter USE_MULT = "MULTIPLY";
+    parameter USE_PATTERN_DETECT = "NO_PATDET";
+    parameter USE_SIMD = "ONE48";
+    parameter [47:0] MASK = 48'h3FFFFFFFFFFF;
+    parameter [47:0] PATTERN = 48'h000000000000;
+    parameter [3:0] IS_ALUMODE_INVERTED = 4'b0;
+    parameter [0:0] IS_CARRYIN_INVERTED = 1'b0;
+    parameter [0:0] IS_CLK_INVERTED = 1'b0;
+    parameter [4:0] IS_INMODE_INVERTED = 5'b0;
+    parameter [6:0] IS_OPMODE_INVERTED = 7'b0;
+
+    initial begin
+`ifdef __ICARUS__
+        if (AUTORESET_PATDET != "NO_RESET") $fatal(1, "Unsupported AUTORESET_PATDET value");
+        if (SEL_MASK != "MASK")     $fatal(1, "Unsupported SEL_MASK value");
+        if (SEL_PATTERN != "PATTERN") $fatal(1, "Unsupported SEL_PATTERN value");
+        if (USE_SIMD != "ONE48" && USE_SIMD != "TWO24" && USE_SIMD != "FOUR12")    $fatal(1, "Unsupported USE_SIMD value");
+        if (IS_ALUMODE_INVERTED != 4'b0) $fatal(1, "Unsupported IS_ALUMODE_INVERTED value");
+        if (IS_CARRYIN_INVERTED != 1'b0) $fatal(1, "Unsupported IS_CARRYIN_INVERTED value");
+        if (IS_CLK_INVERTED != 1'b0) $fatal(1, "Unsupported IS_CLK_INVERTED value");
+        if (IS_INMODE_INVERTED != 5'b0) $fatal(1, "Unsupported IS_INMODE_INVERTED value");
+        if (IS_OPMODE_INVERTED != 7'b0) $fatal(1, "Unsupported IS_OPMODE_INVERTED value");
+`endif
+    end
+
+    wire signed [29:0] A_muxed;
+    wire signed [17:0] B_muxed;
+
+    generate
+        if (A_INPUT == "CASCADE") assign A_muxed = ACIN;
+        else assign A_muxed = A;
+
+        if (B_INPUT == "CASCADE") assign B_muxed = BCIN;
+        else assign B_muxed = B;
+    endgenerate
+
+    reg signed [29:0] Ar1, Ar2;
+    reg signed [24:0] Dr;
+    reg signed [17:0] Br1, Br2;
+    reg signed [47:0] Cr;
+    reg        [4:0]  INMODEr = 5'b0;
+    reg        [6:0]  OPMODEr = 7'b0;
+    reg        [3:0]  ALUMODEr = 4'b0;
+    reg        [2:0]  CARRYINSELr = 3'b0;
+
+    generate
+        // Configurable A register
+        if (AREG == 2) begin
+            initial Ar1 = 30'b0;
+            initial Ar2 = 30'b0;
+            always @(posedge CLK)
+                if (RSTA) begin
+                    Ar1 <= 30'b0;
+                    Ar2 <= 30'b0;
+                end else begin
+                    if (CEA1) Ar1 <= A_muxed;
+                    if (CEA2) Ar2 <= Ar1;
+                end
+        end else if (AREG == 1) begin
+            //initial Ar1 = 30'b0;
+            initial Ar2 = 30'b0;
+            always @(posedge CLK)
+                if (RSTA) begin
+                    Ar1 <= 30'b0;
+                    Ar2 <= 30'b0;
+                end else begin
+                    if (CEA1) Ar1 <= A_muxed;
+                    if (CEA2) Ar2 <= A_muxed;
+                end
+        end else begin
+            always @* Ar1 <= A_muxed;
+            always @* Ar2 <= A_muxed;
+        end
+
+        // Configurable B register
+        if (BREG == 2) begin
+            initial Br1 = 25'b0;
+            initial Br2 = 25'b0;
+            always @(posedge CLK)
+                if (RSTB) begin
+                    Br1 <= 18'b0;
+                    Br2 <= 18'b0;
+                end else begin
+                    if (CEB1) Br1 <= B_muxed;
+                    if (CEB2) Br2 <= Br1;
+                end
+        end else if (BREG == 1) begin
+            //initial Br1 = 25'b0;
+            initial Br2 = 25'b0;
+            always @(posedge CLK)
+                if (RSTB) begin
+                    Br1 <= 18'b0;
+                    Br2 <= 18'b0;
+                end else begin
+                    if (CEB1) Br1 <= B_muxed;
+                    if (CEB2) Br2 <= B_muxed;
+                end
+        end else begin
+            always @* Br1 <= B_muxed;
+            always @* Br2 <= B_muxed;
+        end
+
+        // C and D registers
+        if (CREG == 1) initial Cr = 48'b0;
+        if (CREG == 1) begin always @(posedge CLK) if (RSTC) Cr <= 48'b0; else if (CEC) Cr <= C; end
+        else           always @* Cr <= C;
+
+        if (CREG == 1) initial Dr = 25'b0;
+        if (DREG == 1) begin always @(posedge CLK) if (RSTD) Dr <= 25'b0; else if (CED) Dr <= D; end
+        else           always @* Dr <= D;
+
+        // Control registers
+        if (INMODEREG == 1) initial INMODEr = 5'b0;
+        if (INMODEREG == 1) begin always @(posedge CLK) if (RSTINMODE) INMODEr <= 5'b0; else if (CEINMODE) INMODEr <= INMODE; end
+        else           always @* INMODEr <= INMODE;
+        if (OPMODEREG == 1) initial OPMODEr = 7'b0;
+        if (OPMODEREG == 1) begin always @(posedge CLK) if (RSTCTRL) OPMODEr <= 7'b0; else if (CECTRL) OPMODEr <= OPMODE; end
+        else           always @* OPMODEr <= OPMODE;
+        if (ALUMODEREG == 1) initial ALUMODEr = 4'b0;
+        if (ALUMODEREG == 1) begin always @(posedge CLK) if (RSTALUMODE) ALUMODEr <= 4'b0; else if (CEALUMODE) ALUMODEr <= ALUMODE; end
+        else           always @* ALUMODEr <= ALUMODE;
+        if (CARRYINSELREG == 1) initial CARRYINSELr = 3'b0;
+        if (CARRYINSELREG == 1) begin always @(posedge CLK) if (RSTCTRL) CARRYINSELr <= 3'b0; else if (CECTRL) CARRYINSELr <= CARRYINSEL; end
+        else           always @* CARRYINSELr <= CARRYINSEL;
+    endgenerate
+
+    // A and B cascade
+    generate
+        if (ACASCREG == 1 && AREG == 2) assign ACOUT = Ar1;
+        else assign ACOUT = Ar2;
+        if (BCASCREG == 1 && BREG == 2) assign BCOUT = Br1;
+        else assign BCOUT = Br2;
+    endgenerate
+
+    // A/D input selection and pre-adder
+    wire signed [29:0] Ar12_muxed = INMODEr[0] ? Ar1 : Ar2;
+    wire signed [24:0] Ar12_gated = INMODEr[1] ? 25'b0 : Ar12_muxed;
+    wire signed [24:0] Dr_gated   = INMODEr[2] ? Dr : 25'b0;
+    wire signed [24:0] AD_result  = INMODEr[3] ? (Dr_gated - Ar12_gated) : (Dr_gated + Ar12_gated);
+    reg  signed [24:0] ADr;
+
+    generate
+        if (ADREG == 1) initial ADr = 25'b0;
+        if (ADREG == 1) begin always @(posedge CLK) if (RSTD) ADr <= 25'b0; else if (CEAD) ADr <= AD_result; end
+        else            always @* ADr <= AD_result;
+    endgenerate
+
+    // 25x18 multiplier
+    wire signed [24:0] A_MULT;
+    wire signed [17:0] B_MULT = INMODEr[4] ? Br1 : Br2;
+    generate
+        if (USE_DPORT == "TRUE") assign A_MULT = ADr;
+        else assign A_MULT = Ar12_gated;
+    endgenerate
+
+    wire signed [42:0] M = A_MULT * B_MULT;
+    wire signed [42:0] Mx = (CARRYINSEL == 3'b010) ? 43'bx : M;
+    reg  signed [42:0] Mr = 43'b0;
+
+    // Multiplier result register
+    generate
+        if (MREG == 1) begin always @(posedge CLK) if (RSTM) Mr <= 43'b0; else if (CEM) Mr <= Mx; end
+        else           always @* Mr <= Mx;
+    endgenerate
+
+    wire signed [42:0] Mrx = (CARRYINSELr == 3'b010) ? 43'bx : Mr;
+
+    // X, Y and Z ALU inputs
+    reg signed [47:0] X, Y, Z;
+
+    always @* begin
+        // X multiplexer
+        case (OPMODEr[1:0])
+            2'b00: X = 48'b0;
+            2'b01: begin X = $signed(Mrx);
+`ifdef __ICARUS__
+                if (OPMODEr[3:2] != 2'b01) $fatal(1, "OPMODEr[3:2] must be 2'b01 when OPMODEr[1:0] is 2'b01");
+`endif
+            end
+            2'b10: begin X = P;
+`ifdef __ICARUS__
+                if (PREG != 1) $fatal(1, "PREG must be 1 when OPMODEr[1:0] is 2'b10");
+`endif
+            end
+            2'b11: X = $signed({Ar2, Br2});
+            default: X = 48'bx;
+        endcase
+
+        // Y multiplexer
+        case (OPMODEr[3:2])
+            2'b00: Y = 48'b0;
+            2'b01: begin Y = 48'b0; // FIXME: more accurate partial product modelling?
+`ifdef __ICARUS__
+                if (OPMODEr[1:0] != 2'b01) $fatal(1, "OPMODEr[1:0] must be 2'b01 when OPMODEr[3:2] is 2'b01");
+`endif
+            end
+            2'b10: Y = {48{1'b1}};
+            2'b11: Y = Cr;
+            default: Y = 48'bx;
+        endcase
+
+        // Z multiplexer
+        case (OPMODEr[6:4])
+            3'b000: Z = 48'b0;
+            3'b001: Z = PCIN;
+            3'b010: begin Z = P;
+`ifdef __ICARUS__
+                if (PREG != 1) $fatal(1, "PREG must be 1 when OPMODEr[6:4] i0s 3'b010");
+`endif
+            end
+            3'b011: Z = Cr;
+            3'b100: begin Z = P;
+`ifdef __ICARUS__
+                if (PREG != 1) $fatal(1, "PREG must be 1 when OPMODEr[6:4] is 3'b100");
+                if (OPMODEr[3:0] != 4'b1000) $fatal(1, "OPMODEr[3:0] must be 4'b1000 when OPMODEr[6:4] i0s 3'b100");
+`endif
+            end
+            3'b101: Z = $signed(PCIN[47:17]);
+            3'b110: Z = $signed(P[47:17]);
+            default: Z = 48'bx;
+        endcase
+    end
+
+    // Carry in
+    wire A24_xnor_B17d = A_MULT[24] ~^ B_MULT[17];
+    reg CARRYINr = 1'b0, A24_xnor_B17 = 1'b0;
+    generate
+        if (CARRYINREG == 1) begin always @(posedge CLK) if (RSTALLCARRYIN) CARRYINr <= 1'b0; else if (CECARRYIN) CARRYINr <= CARRYIN; end
+        else                 always @* CARRYINr = CARRYIN;
+
+        if (MREG == 1) begin always @(posedge CLK) if (RSTALLCARRYIN) A24_xnor_B17 <= 1'b0; else if (CEM) A24_xnor_B17 <= A24_xnor_B17d; end
+        else                 always @* A24_xnor_B17 = A24_xnor_B17d;
+    endgenerate
+
+    reg cin_muxed;
+
+    always @(*) begin
+        case (CARRYINSELr)
+            3'b000: cin_muxed = CARRYINr;
+            3'b001: cin_muxed = ~PCIN[47];
+            3'b010: cin_muxed = CARRYCASCIN;
+            3'b011: cin_muxed = PCIN[47];
+            3'b100: cin_muxed = CARRYCASCOUT;
+            3'b101: cin_muxed = ~P[47];
+            3'b110: cin_muxed = A24_xnor_B17;
+            3'b111: cin_muxed = P[47];
+            default: cin_muxed = 1'bx;
+        endcase
+    end
+
+    wire alu_cin = (ALUMODEr[3] || ALUMODEr[2]) ? 1'b0 : cin_muxed;
+
+    // ALU core
+    wire [47:0] Z_muxinv = ALUMODEr[0] ? ~Z : Z;
+    wire [47:0] xor_xyz = X ^ Y ^ Z_muxinv;
+    wire [47:0] maj_xyz = (X & Y) | (X & Z_muxinv) | (Y & Z_muxinv);
+
+    wire [47:0] xor_xyz_muxed = ALUMODEr[3] ? maj_xyz : xor_xyz;
+    wire [47:0] maj_xyz_gated = ALUMODEr[2] ? 48'b0 :  maj_xyz;
+
+    wire [48:0] maj_xyz_simd_gated;
+    wire [3:0] int_carry_in, int_carry_out, ext_carry_out;
+    wire [47:0] alu_sum;
+    assign int_carry_in[0] = 1'b0;
+    wire [3:0] carryout_reset;
+
+    generate
+        if (USE_SIMD == "FOUR12") begin
+            assign maj_xyz_simd_gated = {
+                    maj_xyz_gated[47:36],
+                    1'b0, maj_xyz_gated[34:24],
+                    1'b0, maj_xyz_gated[22:12],
+                    1'b0, maj_xyz_gated[10:0],
+                    alu_cin
+                };
+            assign int_carry_in[3:1] = 3'b000;
+            assign ext_carry_out = {
+                    int_carry_out[3],
+                    maj_xyz_gated[35] ^ int_carry_out[2],
+                    maj_xyz_gated[23] ^ int_carry_out[1],
+                    maj_xyz_gated[11] ^ int_carry_out[0]
+                };
+            assign carryout_reset = 4'b0000;
+        end else if (USE_SIMD == "TWO24") begin
+            assign maj_xyz_simd_gated = {
+                    maj_xyz_gated[47:24],
+                    1'b0, maj_xyz_gated[22:0],
+                    alu_cin
+                };
+            assign int_carry_in[3:1] = {int_carry_out[2], 1'b0, int_carry_out[0]};
+            assign ext_carry_out = {
+                    int_carry_out[3],
+                    1'bx,
+                    maj_xyz_gated[23] ^ int_carry_out[1],
+                    1'bx
+                };
+            assign carryout_reset = 4'b0x0x;
+        end else begin
+            assign maj_xyz_simd_gated = {maj_xyz_gated, alu_cin};
+            assign int_carry_in[3:1] = int_carry_out[2:0];
+            assign ext_carry_out = {
+                    int_carry_out[3],
+                    3'bxxx
+                };
+            assign carryout_reset = 4'b0xxx;
+        end
+
+        genvar i;
+        for (i = 0; i < 4; i = i + 1)
+            assign {int_carry_out[i], alu_sum[i*12 +: 12]} = {1'b0, maj_xyz_simd_gated[i*12 +: ((i == 3) ? 13 : 12)]}
+                                                              + xor_xyz_muxed[i*12 +: 12] + int_carry_in[i];
+    endgenerate
+
+    wire signed [47:0] Pd = ALUMODEr[1] ? ~alu_sum : alu_sum;
+    wire [3:0] CARRYOUTd = (OPMODEr[3:0] == 4'b0101 || ALUMODEr[3:2] != 2'b00) ? 4'bxxxx :
+                           ((ALUMODEr[0] & ALUMODEr[1]) ? ~ext_carry_out : ext_carry_out);
+    wire CARRYCASCOUTd = ext_carry_out[3];
+    wire MULTSIGNOUTd = Mrx[42];
+
+    generate
+        if (PREG == 1) begin
+            initial P = 48'b0;
+            initial CARRYOUT = carryout_reset;
+            initial CARRYCASCOUT = 1'b0;
+            initial MULTSIGNOUT = 1'b0;
+            always @(posedge CLK)
+                if (RSTP) begin
+                    P <= 48'b0;
+                    CARRYOUT <= carryout_reset;
+                    CARRYCASCOUT <= 1'b0;
+                    MULTSIGNOUT <= 1'b0;
+                end else if (CEP) begin
+                    P <= Pd;
+                    CARRYOUT <= CARRYOUTd;
+                    CARRYCASCOUT <= CARRYCASCOUTd;
+                    MULTSIGNOUT <= MULTSIGNOUTd;
+                end
+        end else begin
+            always @* begin
+                P = Pd;
+                CARRYOUT = CARRYOUTd;
+                CARRYCASCOUT = CARRYCASCOUTd;
+                MULTSIGNOUT = MULTSIGNOUTd;
+            end
+        end
+    endgenerate
+
+    assign PCOUT = P;
+
+    generate
+        wire PATTERNDETECTd, PATTERNBDETECTd;
+
+        if (USE_PATTERN_DETECT == "PATDET") begin
+            // TODO: Support SEL_PATTERN != "PATTERN" and SEL_MASK != "MASK
+            assign PATTERNDETECTd = &(~(Pd ^ PATTERN) | MASK);
+            assign PATTERNBDETECTd = &((Pd ^ PATTERN) | MASK);
+        end else begin
+            assign PATTERNDETECTd = 1'b1;
+            assign PATTERNBDETECTd = 1'b1;
+        end
+
+        if (PREG == 1) begin
+            reg PATTERNDETECTPAST, PATTERNBDETECTPAST;
+            initial PATTERNDETECT = 1'b0;
+            initial PATTERNBDETECT = 1'b0;
+            initial PATTERNDETECTPAST = 1'b0;
+            initial PATTERNBDETECTPAST = 1'b0;
+            always @(posedge CLK)
+                if (RSTP) begin
+                    PATTERNDETECT <= 1'b0;
+                    PATTERNBDETECT <= 1'b0;
+                    PATTERNDETECTPAST <= 1'b0;
+                    PATTERNBDETECTPAST <= 1'b0;
+                end else if (CEP) begin
+                    PATTERNDETECT <= PATTERNDETECTd;
+                    PATTERNBDETECT <= PATTERNBDETECTd;
+                    PATTERNDETECTPAST <= PATTERNDETECT;
+                    PATTERNBDETECTPAST <= PATTERNBDETECT;
+                end
+            assign OVERFLOW = &{PATTERNDETECTPAST, ~PATTERNBDETECT, ~PATTERNDETECT};
+            assign UNDERFLOW = &{PATTERNBDETECTPAST, ~PATTERNBDETECT, ~PATTERNDETECT};
+        end else begin
+            always @* begin
+                PATTERNDETECT = PATTERNDETECTd;
+                PATTERNBDETECT = PATTERNBDETECTd;
+            end
+            assign OVERFLOW = 1'bx, UNDERFLOW = 1'bx;
+        end
+    endgenerate
+
+endmodule

techlibs/xilinx/dsp_map.v

@@ -0,0 +1,49 @@
+module \$__MUL25X18 (input [24:0] A, input [17:0] B, output [42:0] Y);
+	parameter A_SIGNED = 0;
+	parameter B_SIGNED = 0;
+	parameter A_WIDTH = 0;
+	parameter B_WIDTH = 0;
+	parameter Y_WIDTH = 0;
+
+	wire [47:0] P_48;
+	DSP48E1 #(
+		// Disable all registers
+		.ACASCREG(0),
+		.ADREG(0),
+		.A_INPUT("DIRECT"),
+		.ALUMODEREG(0),
+		.AREG(0),
+		.BCASCREG(0),
+		.B_INPUT("DIRECT"),
+		.BREG(0),
+		.CARRYINREG(0),
+		.CARRYINSELREG(0),
+		.CREG(0),
+		.DREG(0),
+		.INMODEREG(0),
+		.MREG(0),
+		.OPMODEREG(0),
+		.PREG(0),
+		.USE_MULT("MULTIPLY"),
+		.USE_SIMD("ONE48"),
+		.USE_DPORT("FALSE")
+	) _TECHMAP_REPLACE_ (
+		//Data path
+		.A({{5{A[24]}}, A}),
+		.B(B),
+		.C(48'b0),
+		.D(25'b0),
+		.P(P_48),
+
+		.INMODE(5'b00000),
+		.ALUMODE(4'b0000),
+		.OPMODE(7'b000101),
+		.CARRYINSEL(3'b000),
+
+		.ACIN(30'b0),
+		.BCIN(18'b0),
+		.PCIN(48'b0),
+		.CARRYIN(1'b0)
+	);
+	assign Y = P_48;
+endmodule

techlibs/xilinx/synth_xilinx.cc

@@ -81,6 +81,9 @@ struct SynthXilinxPass : public ScriptPass
 		log("    -nowidelut\n");
 		log("        do not use MUXF[78] resources to implement LUTs larger than LUT6s\n");
 		log("\n");
+		log("    -nodsp\n");
+		log("        do not use DSP48E1s to implement multipliers and associated logic\n");
+		log("\n");
 		log("    -iopad\n");
 		log("        enable I/O buffer insertion (selected automatically by -ise)\n");
 		log("\n");
@@ -116,7 +119,7 @@ struct SynthXilinxPass : public ScriptPass
 	}
 
 	std::string top_opt, edif_file, blif_file, family;
-	bool flatten, retime, vpr, ise, iopad, noiopad, noclkbuf, nobram, nolutram, nosrl, nocarry, nowidelut, abc9;
+	bool flatten, retime, vpr, ise, iopad, noiopad, noclkbuf, nobram, nolutram, nosrl, nocarry, nowidelut, nodsp, abc9;
 	bool flatten_before_abc;
 	int widemux;
 
@@ -139,6 +142,7 @@ struct SynthXilinxPass : public ScriptPass
 		nosrl = false;
 		nocarry = false;
 		nowidelut = false;
+		nodsp = false;
 		abc9 = false;
 		flatten_before_abc = false;
 		widemux = 0;
@@ -240,6 +244,10 @@ struct SynthXilinxPass : public ScriptPass
 				abc9 = true;
 				continue;
 			}
+			if (args[argidx] == "-nodsp") {
+				nodsp = true;
+				continue;
+			}
 			break;
 		}
 		extra_args(args, argidx, design);
@@ -302,10 +310,10 @@ struct SynthXilinxPass : public ScriptPass
 			run(stringf("hierarchy -check %s", top_opt.c_str()));
 		}
 
-		if (check_label("coarse")) {
+		if (check_label("prepare")) {
 			run("proc");
-			if (help_mode || flatten)
+			if (flatten || help_mode)
-				run("flatten", "(if -flatten)");
+				run("flatten", "(with '-flatten')");
 			run("opt_expr");
 			run("opt_clean");
 			run("check");
@@ -329,6 +337,26 @@ struct SynthXilinxPass : public ScriptPass
 			}
 
 			run("techmap -map +/cmp2lut.v -D LUT_WIDTH=6");
+		}
+
+		if (check_label("map_dsp"), "(skip if '-nodsp')") {
+			if (!nodsp || help_mode) {
+				// NB: Xilinx multipliers are signed only
+				run("techmap -map +/mul2dsp.v -map +/xilinx/dsp_map.v -D DSP_A_MAXWIDTH=25 -D DSP_A_MAXWIDTH_PARTIAL=18 -D DSP_B_MAXWIDTH=18 "
+						"-D DSP_A_MINWIDTH=2 -D DSP_B_MINWIDTH=2 " // Blocks Nx1 multipliers
+						"-D DSP_Y_MINWIDTH=9 " // UG901 suggests small multiplies are those 4x4 and smaller
+						"-D DSP_SIGNEDONLY=1 -D DSP_NAME=$__MUL25X18");
+				run("select a:mul2dsp");
+				run("setattr -unset mul2dsp");
+				run("opt_expr -fine");
+				run("wreduce");
+				run("select -clear");
+				run("xilinx_dsp");
+				run("chtype -set $mul t:$__soft_mul");
+			}
+		}
+
+		if (check_label("coarse")) {
 			run("alumacc");
 			run("share");
 			run("opt");

techlibs/xilinx/tests/.gitignore

@@ -4,3 +4,8 @@ bram1_[0-9]*/
 bram2.log
 bram2_syn.v
 bram2_tb
+dsp_work*/
+test_dsp_model_ref.v
+test_dsp_model_uut.v
+test_dsp_model
+*.vcd

techlibs/xilinx/tests/test_dsp_model.sh

@@ -0,0 +1,14 @@
+#!/bin/bash
+set -ex
+sed 's/DSP48E1/DSP48E1_UUT/; /DSP48E1_UUT/,/endmodule/ p; d;' < ../cells_sim.v > test_dsp_model_uut.v
+if [ ! -f "test_dsp_model_ref.v" ]; then
+	cat /opt/Xilinx/Vivado/2019.1/data/verilog/src/unisims/DSP48E1.v > test_dsp_model_ref.v
+fi
+for tb in macc_overflow_underflow \
+    simd24_preadd_noreg_nocasc simd12_preadd_noreg_nocasc \
+    mult_allreg_nopreadd_nocasc mult_noreg_nopreadd_nocasc  \
+	mult_allreg_preadd_nocasc mult_noreg_preadd_nocasc mult_inreg_preadd_nocasc
+do
+	iverilog -s $tb -s glbl -o test_dsp_model test_dsp_model.v test_dsp_model_uut.v test_dsp_model_ref.v /opt/Xilinx/Vivado/2019.1/data/verilog/src/glbl.v
+	vvp -N ./test_dsp_model
+done

techlibs/xilinx/tests/test_dsp_model.v

@@ -0,0 +1,652 @@
+`timescale 1ns / 1ps
+
+module testbench;
+    parameter integer ACASCREG = 1;
+    parameter integer ADREG = 1;
+    parameter integer ALUMODEREG = 1;
+    parameter integer AREG = 1;
+    parameter AUTORESET_PATDET = "NO_RESET";
+    parameter A_INPUT = "DIRECT";
+    parameter integer BCASCREG = 1;
+    parameter integer BREG = 1;
+    parameter B_INPUT = "DIRECT";
+    parameter integer CARRYINREG = 1;
+    parameter integer CARRYINSELREG = 1;
+    parameter integer CREG = 1;
+    parameter integer DREG = 1;
+    parameter integer INMODEREG = 1;
+    parameter integer MREG = 1;
+    parameter integer OPMODEREG = 1;
+    parameter integer PREG = 1;
+    parameter SEL_MASK = "MASK";
+    parameter SEL_PATTERN = "PATTERN";
+    parameter USE_DPORT = "FALSE";
+    parameter USE_MULT = "MULTIPLY";
+    parameter USE_PATTERN_DETECT = "NO_PATDET";
+    parameter USE_SIMD = "ONE48";
+    parameter [47:0] MASK = 48'h3FFFFFFFFFFF;
+    parameter [47:0] PATTERN = 48'h000000000000;
+    parameter [3:0] IS_ALUMODE_INVERTED = 4'b0;
+    parameter [0:0] IS_CARRYIN_INVERTED = 1'b0;
+    parameter [0:0] IS_CLK_INVERTED = 1'b0;
+    parameter [4:0] IS_INMODE_INVERTED = 5'b0;
+    parameter [6:0] IS_OPMODE_INVERTED = 7'b0;
+
+	reg CLK;
+	reg CEA1, CEA2, CEAD, CEALUMODE, CEB1, CEB2, CEC, CECARRYIN, CECTRL;
+	reg CED, CEINMODE, CEM, CEP;
+	reg RSTA, RSTALLCARRYIN, RSTALUMODE, RSTB, RSTC, RSTCTRL, RSTD, RSTINMODE, RSTM, RSTP;
+	reg [29:0] A, ACIN;
+	reg [17:0] B, BCIN;
+	reg [47:0] C;
+	reg [24:0] D;
+	reg [47:0] PCIN;
+	reg [3:0] ALUMODE;
+	reg [2:0] CARRYINSEL;
+	reg [4:0] INMODE;
+	reg [6:0] OPMODE;
+	reg CARRYCASCIN, CARRYIN, MULTSIGNIN;
+
+    output [29:0] ACOUT, REF_ACOUT;
+    output [17:0] BCOUT, REF_BCOUT;
+    output CARRYCASCOUT, REF_CARRYCASCOUT;
+    output [3:0] CARRYOUT, REF_CARRYOUT;
+    output MULTSIGNOUT, REF_MULTSIGNOUT;
+    output OVERFLOW, REF_OVERFLOW;
+    output [47:0] P, REF_P;
+    output PATTERNBDETECT, REF_PATTERNBDETECT;
+    output PATTERNDETECT, REF_PATTERNDETECT;
+    output [47:0] PCOUT, REF_PCOUT;
+    output UNDERFLOW, REF_UNDERFLOW;
+
+	integer errcount = 0;
+
+	reg ERROR_FLAG = 0;
+
+	task clkcycle;
+		begin
+			#5;
+			CLK = ~CLK;
+			#10;
+			CLK = ~CLK;
+			#2;
+			ERROR_FLAG = 0;
+			if (REF_P !== P) begin
+				$display("ERROR at %1t: REF_P=%b UUT_P=%b DIFF=%b", $time, REF_P, P, REF_P ^ P);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			if (REF_CARRYOUT !== CARRYOUT) begin
+				$display("ERROR at %1t: REF_CARRYOUT=%b UUT_CARRYOUT=%b", $time, REF_CARRYOUT, CARRYOUT);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			if (REF_PATTERNDETECT !== PATTERNDETECT) begin
+				$display("ERROR at %1t: REF_PATTERNDETECT=%b UUT_PATTERNDETECT=%b DIFF=%b REF_P=%b P=%b", $time, REF_PATTERNDETECT, PATTERNDETECT, REF_PATTERNDETECT ^ PATTERNDETECT, REF_P, P);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			if (REF_PATTERNBDETECT !== PATTERNBDETECT) begin
+				$display("ERROR at %1t: REF_PATTERNBDETECT=%b UUT_PATTERNBDETECT=%b DIFF=%b", $time, REF_PATTERNBDETECT, PATTERNBDETECT, REF_PATTERNBDETECT ^ PATTERNBDETECT);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			if (REF_OVERFLOW !== OVERFLOW) begin
+				$display("ERROR at %1t: REF_OVERFLOW=%b UUT_OVERFLOW=%b DIFF=%b", $time, REF_OVERFLOW, OVERFLOW, REF_OVERFLOW ^ OVERFLOW);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			if (REF_UNDERFLOW !== UNDERFLOW) begin
+				$display("ERROR at %1t: REF_UNDERFLOW=%b UUT_UNDERFLOW=%b DIFF=%b", $time, REF_UNDERFLOW, UNDERFLOW, REF_UNDERFLOW ^ UNDERFLOW);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			#3;
+		end
+	endtask
+
+	reg config_valid = 0;
+	task drc;
+		begin
+			config_valid = 1;
+			if (AREG != 2 && INMODE[0]) config_valid = 0;
+			if (BREG != 2 && INMODE[4]) config_valid = 0;
+
+			if (USE_SIMD != "ONE48" && OPMODE[3:0] == 4'b0101) config_valid = 0;
+
+			if (OPMODE[1:0] == 2'b10 && PREG != 1) config_valid = 0;
+			if ((OPMODE[3:2] == 2'b01) ^ (OPMODE[1:0] == 2'b01) == 1'b1) config_valid = 0;
+			if ((OPMODE[6:4] == 3'b010 || OPMODE[6:4] == 3'b110) && PREG != 1) config_valid = 0;
+			if ((OPMODE[6:4] == 3'b100) && (PREG != 1 || OPMODE[3:0] != 4'b1000 || ALUMODE[3:2] == 2'b01 || ALUMODE[3:2] == 2'b11)) config_valid = 0;
+			if ((CARRYINSEL == 3'b100 || CARRYINSEL == 3'b101 || CARRYINSEL == 3'b111) && (PREG != 1)) config_valid = 0;
+			if (OPMODE[6:4] == 3'b111) config_valid = 0;
+			if ((OPMODE[3:0] == 4'b0101) && CARRYINSEL == 3'b010) config_valid = 0;
+			if (CARRYINSEL == 3'b000 && OPMODE == 7'b1001000) config_valid = 0;
+
+			if ((ALUMODE[3:2] == 2'b01 || ALUMODE[3:2] == 2'b11) && OPMODE[3:2] != 2'b00 && OPMODE[3:2] != 2'b10) config_valid = 0;
+
+
+		end
+	endtask
+
+	initial begin
+		$dumpfile("test_dsp_model.vcd");
+		$dumpvars(0, testbench);
+
+		#2;
+		CLK = 1'b0;
+		{CEA1, CEA2, CEAD, CEALUMODE, CEB1, CEB2, CEC, CECARRYIN, CECTRL} = 9'b111111111;
+		{CED, CEINMODE, CEM, CEP} = 4'b1111;
+
+		{A, B, C, D} = 0;
+		{ACIN, BCIN, PCIN} = 0;
+		{ALUMODE, CARRYINSEL, INMODE} = 0;
+		{OPMODE, CARRYCASCIN, CARRYIN, MULTSIGNIN} = 0;
+
+		{RSTA, RSTALLCARRYIN, RSTALUMODE, RSTB, RSTC, RSTCTRL, RSTD, RSTINMODE, RSTM, RSTP} = ~0;
+		repeat (10) begin
+			#10;
+			CLK = 1'b1;
+			#10;
+			CLK = 1'b0;
+			#10;
+			CLK = 1'b1;
+			#10;
+			CLK = 1'b0;
+		end
+		{RSTA, RSTALLCARRYIN, RSTALUMODE, RSTB, RSTC, RSTCTRL, RSTD, RSTINMODE, RSTM, RSTP} = 0;
+
+		repeat (10000) begin
+			clkcycle;
+			config_valid = 0;
+			while (!config_valid) begin
+				A = $urandom;
+				ACIN = $urandom;
+				B = $urandom;
+				BCIN = $urandom;
+				C = {$urandom, $urandom};
+				D = $urandom;
+				PCIN = {$urandom, $urandom};
+
+				{CEA1, CEA2, CEAD, CEALUMODE, CEB1, CEB2, CEC, CECARRYIN, CECTRL} = $urandom | $urandom | $urandom;
+				{CED, CEINMODE, CEM, CEP} = $urandom | $urandom | $urandom | $urandom;
+
+				// Otherwise we can accidentally create illegal configs
+				CEINMODE = CECTRL;
+				CEALUMODE = CECTRL;
+
+				{RSTA, RSTALLCARRYIN, RSTALUMODE, RSTB, RSTC, RSTCTRL, RSTD, RSTINMODE, RSTM, RSTP} = $urandom & $urandom & $urandom & $urandom & $urandom & $urandom;
+				{ALUMODE, INMODE} = $urandom;
+				CARRYINSEL = $urandom & $urandom & $urandom;
+				OPMODE = $urandom; 
+				if ($urandom & 1'b1)
+					OPMODE[3:0] = 4'b0101; // test multiply more than other modes
+				{CARRYCASCIN, CARRYIN, MULTSIGNIN} = $urandom;
+
+				// So few valid options in these modes, just force one valid option
+				if (CARRYINSEL == 3'b001) OPMODE = 7'b1010101;
+				if (CARRYINSEL == 3'b010) OPMODE = 7'b0001010;
+				if (CARRYINSEL == 3'b011) OPMODE = 7'b0011011;
+				if (CARRYINSEL == 3'b100) OPMODE = 7'b0110011;
+				if (CARRYINSEL == 3'b101) OPMODE = 7'b0011010;
+				if (CARRYINSEL == 3'b110) OPMODE = 7'b0010101;
+				if (CARRYINSEL == 3'b111) OPMODE = 7'b0100011;
+
+				drc;
+			end
+		end
+
+		if (errcount == 0) begin
+			$display("All tests passed.");
+			$finish;
+		end else begin
+			$display("Caught %1d errors.", errcount);
+			$stop;
+		end
+	end
+
+	DSP48E1 #(
+		.ACASCREG           (ACASCREG),
+		.ADREG              (ADREG),
+		.ALUMODEREG         (ALUMODEREG),
+		.AREG               (AREG),
+		.AUTORESET_PATDET   (AUTORESET_PATDET),
+		.A_INPUT            (A_INPUT),
+		.BCASCREG           (BCASCREG),
+		.BREG               (BREG),
+		.B_INPUT            (B_INPUT),
+		.CARRYINREG         (CARRYINREG),
+		.CARRYINSELREG      (CARRYINSELREG),
+		.CREG               (CREG),
+		.DREG               (DREG),
+		.INMODEREG          (INMODEREG),
+		.MREG               (MREG),
+		.OPMODEREG          (OPMODEREG),
+		.PREG               (PREG),
+		.SEL_MASK           (SEL_MASK),
+		.SEL_PATTERN        (SEL_PATTERN),
+		.USE_DPORT          (USE_DPORT),
+		.USE_MULT           (USE_MULT),
+		.USE_PATTERN_DETECT (USE_PATTERN_DETECT),
+		.USE_SIMD           (USE_SIMD),
+		.MASK               (MASK),
+		.PATTERN            (PATTERN),
+		.IS_ALUMODE_INVERTED(IS_ALUMODE_INVERTED),
+		.IS_CARRYIN_INVERTED(IS_CARRYIN_INVERTED),
+		.IS_CLK_INVERTED    (IS_CLK_INVERTED),
+		.IS_INMODE_INVERTED (IS_INMODE_INVERTED),
+		.IS_OPMODE_INVERTED (IS_OPMODE_INVERTED)
+	) ref (
+		.ACOUT         (REF_ACOUT),
+		.BCOUT         (REF_BCOUT),
+		.CARRYCASCOUT  (REF_CARRYCASCOUT),
+		.CARRYOUT      (REF_CARRYOUT),
+		.MULTSIGNOUT   (REF_MULTSIGNOUT),
+		.OVERFLOW      (REF_OVERFLOW),
+		.P             (REF_P),
+		.PATTERNBDETECT(REF_PATTERNBDETECT),
+		.PATTERNDETECT (REF_PATTERNDETECT),
+		.PCOUT         (REF_PCOUT),
+		.UNDERFLOW     (REF_UNDERFLOW),
+		.A             (A),
+		.ACIN          (ACIN),
+		.ALUMODE       (ALUMODE),
+		.B             (B),
+		.BCIN          (BCIN),
+		.C             (C),
+		.CARRYCASCIN   (CARRYCASCIN),
+		.CARRYINSEL    (CARRYINSEL),
+		.CEA1          (CEA1),
+		.CEA2          (CEA2),
+		.CEAD          (CEAD),
+		.CEALUMODE     (CEALUMODE),
+		.CEB1          (CEB1),
+		.CEB2          (CEB2),
+		.CEC           (CEC),
+		.CECARRYIN     (CECARRYIN),
+		.CECTRL        (CECTRL),
+		.CED           (CED),
+		.CEINMODE      (CEINMODE),
+		.CEM           (CEM),
+		.CEP           (CEP),
+		.CLK           (CLK),
+		.D             (D),
+		.INMODE        (INMODE),
+		.MULTSIGNIN    (MULTSIGNIN),
+		.OPMODE        (OPMODE),
+		.PCIN          (PCIN),
+		.RSTA          (RSTA),
+		.RSTALLCARRYIN (RSTALLCARRYIN),
+		.RSTALUMODE    (RSTALUMODE),
+		.RSTB          (RSTB),
+		.RSTC          (RSTC),
+		.RSTCTRL       (RSTCTRL),
+		.RSTD          (RSTD),
+		.RSTINMODE     (RSTINMODE),
+		.RSTM          (RSTM),
+		.RSTP          (RSTP)
+	);
+
+	DSP48E1_UUT #(
+		.ACASCREG           (ACASCREG),
+		.ADREG              (ADREG),
+		.ALUMODEREG         (ALUMODEREG),
+		.AREG               (AREG),
+		.AUTORESET_PATDET   (AUTORESET_PATDET),
+		.A_INPUT            (A_INPUT),
+		.BCASCREG           (BCASCREG),
+		.BREG               (BREG),
+		.B_INPUT            (B_INPUT),
+		.CARRYINREG         (CARRYINREG),
+		.CARRYINSELREG      (CARRYINSELREG),
+		.CREG               (CREG),
+		.DREG               (DREG),
+		.INMODEREG          (INMODEREG),
+		.MREG               (MREG),
+		.OPMODEREG          (OPMODEREG),
+		.PREG               (PREG),
+		.SEL_MASK           (SEL_MASK),
+		.SEL_PATTERN        (SEL_PATTERN),
+		.USE_DPORT          (USE_DPORT),
+		.USE_MULT           (USE_MULT),
+		.USE_PATTERN_DETECT (USE_PATTERN_DETECT),
+		.USE_SIMD           (USE_SIMD),
+		.MASK               (MASK),
+		.PATTERN            (PATTERN),
+		.IS_ALUMODE_INVERTED(IS_ALUMODE_INVERTED),
+		.IS_CARRYIN_INVERTED(IS_CARRYIN_INVERTED),
+		.IS_CLK_INVERTED    (IS_CLK_INVERTED),
+		.IS_INMODE_INVERTED (IS_INMODE_INVERTED),
+		.IS_OPMODE_INVERTED (IS_OPMODE_INVERTED)
+	) uut (
+		.ACOUT         (ACOUT),
+		.BCOUT         (BCOUT),
+		.CARRYCASCOUT  (CARRYCASCOUT),
+		.CARRYOUT      (CARRYOUT),
+		.MULTSIGNOUT   (MULTSIGNOUT),
+		.OVERFLOW      (OVERFLOW),
+		.P             (P),
+		.PATTERNBDETECT(PATTERNBDETECT),
+		.PATTERNDETECT (PATTERNDETECT),
+		.PCOUT         (PCOUT),
+		.UNDERFLOW     (UNDERFLOW),
+		.A             (A),
+		.ACIN          (ACIN),
+		.ALUMODE       (ALUMODE),
+		.B             (B),
+		.BCIN          (BCIN),
+		.C             (C),
+		.CARRYCASCIN   (CARRYCASCIN),
+		.CARRYINSEL    (CARRYINSEL),
+		.CEA1          (CEA1),
+		.CEA2          (CEA2),
+		.CEAD          (CEAD),
+		.CEALUMODE     (CEALUMODE),
+		.CEB1          (CEB1),
+		.CEB2          (CEB2),
+		.CEC           (CEC),
+		.CECARRYIN     (CECARRYIN),
+		.CECTRL        (CECTRL),
+		.CED           (CED),
+		.CEINMODE      (CEINMODE),
+		.CEM           (CEM),
+		.CEP           (CEP),
+		.CLK           (CLK),
+		.D             (D),
+		.INMODE        (INMODE),
+		.MULTSIGNIN    (MULTSIGNIN),
+		.OPMODE        (OPMODE),
+		.PCIN          (PCIN),
+		.RSTA          (RSTA),
+		.RSTALLCARRYIN (RSTALLCARRYIN),
+		.RSTALUMODE    (RSTALUMODE),
+		.RSTB          (RSTB),
+		.RSTC          (RSTC),
+		.RSTCTRL       (RSTCTRL),
+		.RSTD          (RSTD),
+		.RSTINMODE     (RSTINMODE),
+		.RSTM          (RSTM),
+		.RSTP          (RSTP)
+	);
+endmodule
+
+module mult_noreg_nopreadd_nocasc;
+	testbench #(
+		.ACASCREG           (0),
+		.ADREG              (0),
+		.ALUMODEREG         (0),
+		.AREG               (0),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (0),
+		.BREG               (0),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (0),
+		.CARRYINSELREG      (0),
+		.CREG               (0),
+		.DREG               (0),
+		.INMODEREG          (0),
+		.MREG               (0),
+		.OPMODEREG          (0),
+		.PREG               (0),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("FALSE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("NO_PATDET"),
+		.USE_SIMD           ("ONE48"),
+		.MASK               (48'h3FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule
+
+module mult_allreg_nopreadd_nocasc;
+	testbench #(
+		.ACASCREG           (1),
+		.ADREG              (1),
+		.ALUMODEREG         (1),
+		.AREG               (2),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (1),
+		.BREG               (2),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (1),
+		.CARRYINSELREG      (1),
+		.CREG               (1),
+		.DREG               (1),
+		.INMODEREG          (1),
+		.MREG               (1),
+		.OPMODEREG          (1),
+		.PREG               (1),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("FALSE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("NO_PATDET"),
+		.USE_SIMD           ("ONE48"),
+		.MASK               (48'h3FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule
+
+module mult_noreg_preadd_nocasc;
+	testbench #(
+		.ACASCREG           (0),
+		.ADREG              (0),
+		.ALUMODEREG         (0),
+		.AREG               (0),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (0),
+		.BREG               (0),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (0),
+		.CARRYINSELREG      (0),
+		.CREG               (0),
+		.DREG               (0),
+		.INMODEREG          (0),
+		.MREG               (0),
+		.OPMODEREG          (0),
+		.PREG               (0),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("TRUE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("NO_PATDET"),
+		.USE_SIMD           ("ONE48"),
+		.MASK               (48'h3FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule
+
+module mult_allreg_preadd_nocasc;
+	testbench #(
+		.ACASCREG           (1),
+		.ADREG              (1),
+		.ALUMODEREG         (1),
+		.AREG               (2),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (1),
+		.BREG               (2),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (1),
+		.CARRYINSELREG      (1),
+		.CREG               (1),
+		.DREG               (1),
+		.INMODEREG          (1),
+		.MREG               (1),
+		.OPMODEREG          (1),
+		.PREG               (1),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("TRUE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("NO_PATDET"),
+		.USE_SIMD           ("ONE48"),
+		.MASK               (48'h3FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule
+
+module mult_inreg_preadd_nocasc;
+	testbench #(
+		.ACASCREG           (1),
+		.ADREG              (0),
+		.ALUMODEREG         (0),
+		.AREG               (1),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (1),
+		.BREG               (1),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (0),
+		.CARRYINSELREG      (0),
+		.CREG               (1),
+		.DREG               (1),
+		.INMODEREG          (0),
+		.MREG               (0),
+		.OPMODEREG          (0),
+		.PREG               (0),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("TRUE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("NO_PATDET"),
+		.USE_SIMD           ("ONE48"),
+		.MASK               (48'h3FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule
+
+module simd12_preadd_noreg_nocasc;
+	testbench #(
+		.ACASCREG           (0),
+		.ADREG              (0),
+		.ALUMODEREG         (0),
+		.AREG               (0),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (0),
+		.BREG               (0),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (0),
+		.CARRYINSELREG      (0),
+		.CREG               (0),
+		.DREG               (0),
+		.INMODEREG          (0),
+		.MREG               (0),
+		.OPMODEREG          (0),
+		.PREG               (0),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("TRUE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("NO_PATDET"),
+		.USE_SIMD           ("FOUR12"),
+		.MASK               (48'h3FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule
+
+
+module simd24_preadd_noreg_nocasc;
+	testbench #(
+		.ACASCREG           (0),
+		.ADREG              (0),
+		.ALUMODEREG         (0),
+		.AREG               (0),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (0),
+		.BREG               (0),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (0),
+		.CARRYINSELREG      (0),
+		.CREG               (0),
+		.DREG               (0),
+		.INMODEREG          (0),
+		.MREG               (0),
+		.OPMODEREG          (0),
+		.PREG               (0),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("TRUE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("NO_PATDET"),
+		.USE_SIMD           ("TWO24"),
+		.MASK               (48'h3FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule
+
+module macc_overflow_underflow;
+	testbench #(
+		.ACASCREG           (0),
+		.ADREG              (0),
+		.ALUMODEREG         (0),
+		.AREG               (0),
+		.AUTORESET_PATDET   ("NO_RESET"),
+		.A_INPUT            ("DIRECT"),
+		.BCASCREG           (0),
+		.BREG               (0),
+		.B_INPUT            ("DIRECT"),
+		.CARRYINREG         (0),
+		.CARRYINSELREG      (0),
+		.CREG               (0),
+		.DREG               (0),
+		.INMODEREG          (0),
+		.MREG               (0),
+		.OPMODEREG          (0),
+		.PREG               (1),
+		.SEL_MASK           ("MASK"),
+		.SEL_PATTERN        ("PATTERN"),
+		.USE_DPORT          ("FALSE"),
+		.USE_MULT           ("DYNAMIC"),
+		.USE_PATTERN_DETECT ("PATDET"),
+		.USE_SIMD           ("ONE48"),
+		.MASK               (48'h1FFFFFFFFFFF),
+		.PATTERN            (48'h000000000000),
+		.IS_ALUMODE_INVERTED(4'b0),
+		.IS_CARRYIN_INVERTED(1'b0),
+		.IS_CLK_INVERTED    (1'b0),
+		.IS_INMODE_INVERTED (5'b0),
+		.IS_OPMODE_INVERTED (7'b0)
+	) testbench ();
+endmodule

tests/ice40/macc.v

@@ -13,13 +13,35 @@ reg [(A_WIDTH + B_WIDTH - 1):0] reg_tmp_c;
 assign c = reg_tmp_c;
 always @(posedge clk)
 begin
-if(set)
+    if(set)
-begin
+    begin
-reg_tmp_c <= 0;
+        reg_tmp_c <= 0;
-end
+    end
-else
+    else
-begin
+    begin
-reg_tmp_c <= a * b + c;
+        reg_tmp_c <= a * b + c;
-end
+    end
+end
+endmodule
+
+module top2(clk,a,b,c,hold);
+parameter A_WIDTH = 6 /*4*/;
+parameter B_WIDTH = 6 /*3*/;
+input hold;
+input clk;
+input signed [(A_WIDTH - 1):0] a;
+input signed [(B_WIDTH - 1):0] b;
+output signed [(A_WIDTH + B_WIDTH - 1):0] c;
+reg signed [A_WIDTH-1:0] reg_a;
+reg signed [B_WIDTH-1:0] reg_b;
+reg [(A_WIDTH + B_WIDTH - 1):0] reg_tmp_c;
+assign c = reg_tmp_c;
+always @(posedge clk)
+begin
+    if (!hold) begin
+        reg_a <= a;
+        reg_b <= b;
+        reg_tmp_c <= reg_a * reg_b + c;
+    end
 end
 endmodule

tests/ice40/macc.ys

@@ -1,13 +1,25 @@
 read_verilog macc.v
 proc
+design -save read
+
 hierarchy -top top
-#equiv_opt -assert -map +/ice40/cells_sim.v synth_ice40 -dsp # equivalency check
+equiv_opt -assert -multiclock -map +/ice40/cells_sim.v synth_ice40 -dsp # equivalency check
-
-equiv_opt -run :prove -map +/ice40/cells_sim.v synth_ice40 -dsp
-async2sync
-equiv_opt -run prove: -assert null
-
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 select -assert-count 1 t:SB_MAC16
 select -assert-none t:SB_MAC16 %% t:* %D
+
+design -load read
+hierarchy -top top2
+
+#equiv_opt -multiclock -assert -map +/ice40/cells_sim.v synth_ice40 -dsp # equivalency check
+
+equiv_opt -run :prove -multiclock -assert -map +/ice40/cells_sim.v synth_ice40 -dsp # equivalency check
+clk2fflogic
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -set-init-zero -seq 4 -verify -prove-asserts -show-ports miter
+
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:SB_MAC16
+select -assert-none t:SB_MAC16 %% t:* %D

tests/xilinx/.gitignore

@@ -1,3 +1,4 @@
 /*.log
 /*.out
 /run-test.mk
+/*_uut.v

tests/xilinx/dsp_simd.ys

@@ -0,0 +1,25 @@
+read_verilog <<EOT
+module simd(input [12*4-1:0] a, input [12*4-1:0] b, (* use_dsp="simd" *) output [7*12-1:0] o12, (* use_dsp="simd" *) output [2*24-1:0] o24);
+generate
+    genvar i;
+    // 4 x 12-bit adder
+    for (i = 0; i < 4; i++)
+        assign o12[i*12+:12] = a[i*12+:12] + b[i*12+:12];
+    // 2 x 24-bit subtract
+    for (i = 0; i < 2; i++)
+        assign o24[i*24+:24] = a[i*24+:24] - b[i*24+:24];
+endgenerate
+reg [3*12-1:0] ro;
+always @* begin
+    ro[0*12+:12] = a[0*10+:10] + b[0*10+:10];
+    ro[1*12+:12] = a[1*10+:10] + b[1*10+:10];
+    ro[2*12+:12] = a[2*8+:8] + b[2*8+:8];
+end
+assign o12[4*12+:3*12] = ro;
+endmodule
+EOT
+
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx
+design -load postopt
+select -assert-count 3 t:DSP48E1

tests/xilinx/macc.sh

@@ -0,0 +1,3 @@
+../../yosys -qp "synth_xilinx -top macc2; rename -top macc2_uut" macc.v -o macc_uut.v
+iverilog -o test_macc macc_tb.v macc_uut.v macc.v ../../techlibs/xilinx/cells_sim.v
+vvp -N ./test_macc

tests/xilinx/macc.v

@@ -0,0 +1,84 @@
+// Signed 40-bit streaming accumulator with 16-bit inputs
+// File: HDL_Coding_Techniques/multipliers/multipliers4.v
+//
+// Source:
+// https://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_2/ug901-vivado-synthesis.pdf p.90
+//
+module macc # (parameter SIZEIN = 16, SIZEOUT = 40) (
+	input clk, ce, sload,
+	input signed [SIZEIN-1:0] a, b,
+	output signed [SIZEOUT-1:0] accum_out
+);
+// Declare registers for intermediate values
+reg signed [SIZEIN-1:0] a_reg, b_reg;
+reg sload_reg;
+reg signed [2*SIZEIN-1:0] mult_reg;
+reg signed [SIZEOUT-1:0] adder_out, old_result;
+always @* /*(adder_out or sload_reg)*/ begin // Modification necessary to fix sim/synth mismatch
+	if (sload_reg)
+		old_result <= 0;
+	else
+		// 'sload' is now active (=low) and opens the accumulation loop.
+		// The accumulator takes the next multiplier output in
+		// the same cycle.
+		old_result <= adder_out;
+end
+
+always @(posedge clk)
+	if (ce)
+	begin
+		a_reg <= a;
+		b_reg <= b;
+		mult_reg <= a_reg * b_reg;
+		sload_reg <= sload;
+		// Store accumulation result into a register
+		adder_out <= old_result + mult_reg;
+	end
+
+// Output accumulation result
+assign accum_out = adder_out;
+
+endmodule
+
+// Adapted variant of above
+module macc2 # (parameter SIZEIN = 16, SIZEOUT = 40) (
+	input clk,
+	input ce,
+	input rst,
+	input signed [SIZEIN-1:0] a, b,
+	output signed [SIZEOUT-1:0] accum_out,
+	output overflow
+);
+// Declare registers for intermediate values
+reg signed [SIZEIN-1:0] a_reg, b_reg, a_reg2, b_reg2;
+reg signed [2*SIZEIN-1:0] mult_reg = 0;
+reg signed [SIZEOUT:0] adder_out = 0;
+reg overflow_reg;
+always @(posedge clk) begin
+	//if (ce)
+	begin
+		a_reg <= a;
+		b_reg <= b;
+		a_reg2 <= a_reg;
+		b_reg2 <= b_reg;
+		mult_reg <= a_reg2 * b_reg2;
+		// Store accumulation result into a register
+		adder_out <= adder_out + mult_reg;
+		overflow_reg <= overflow;
+	end
+	if (rst) begin
+		a_reg <= 0;
+		a_reg2 <= 0;
+		b_reg <= 0;
+		b_reg2 <= 0;
+		mult_reg <= 0;
+		adder_out <= 0;
+		overflow_reg <= 1'b0;
+	end
+end
+assign overflow = (adder_out >= 2**(SIZEOUT-1)) | overflow_reg;
+
+// Output accumulation result
+assign accum_out = overflow ? 2**(SIZEOUT-1)-1 : adder_out;
+
+endmodule

tests/xilinx/macc.ys

@@ -0,0 +1,31 @@
+read_verilog macc.v
+design -save read
+
+proc
+hierarchy -top macc
+#equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx ### TODO
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -seq 10 -show-inputs -show-outputs miter
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd macc # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:FDRE
+select -assert-count 1 t:DSP48E1
+select -assert-none t:BUFG t:FDRE t:DSP48E1 %% t:* %D
+
+design -load read
+proc
+hierarchy -top macc2
+#equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx ### TODO
+equiv_opt -run :prove -map +/xilinx/cells_sim.v synth_xilinx
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -seq 10 -show-inputs -show-outputs miter
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd macc2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:DSP48E1
+select -assert-count 1 t:FDRE
+select -assert-count 1 t:LUT2
+select -assert-count 41 t:LUT3
+select -assert-none t:BUFG t:DSP48E1 t:FDRE t:LUT2 t:LUT3 %% t:* %D

tests/xilinx/macc_tb.v

@@ -0,0 +1,96 @@
+`timescale 1ns / 1ps
+
+module testbench;
+
+    parameter SIZEIN = 16, SIZEOUT = 40;
+	reg clk, ce, rst;
+   	reg signed [SIZEIN-1:0] a, b;
+	output signed [SIZEOUT-1:0] REF_accum_out, accum_out;
+	output REF_overflow, overflow;
+
+	integer errcount = 0;
+
+	reg ERROR_FLAG = 0;
+
+	task clkcycle;
+		begin
+			#5;
+			clk = ~clk;
+			#10;
+			clk = ~clk;
+			#2;
+			ERROR_FLAG = 0;
+			if (REF_accum_out !== accum_out) begin
+				$display("ERROR at %1t: REF_accum_out=%b UUT_accum_out=%b DIFF=%b", $time, REF_accum_out, accum_out, REF_accum_out ^ accum_out);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			if (REF_overflow !== overflow) begin
+				$display("ERROR at %1t: REF_overflow=%b UUT_overflow=%b DIFF=%b", $time, REF_overflow, overflow, REF_overflow ^ overflow);
+				errcount = errcount + 1;
+				ERROR_FLAG = 1;
+			end
+			#3;
+		end
+	endtask
+
+	initial begin
+		//$dumpfile("test_macc.vcd");
+		//$dumpvars(0, testbench);
+
+		#2;
+		clk = 1'b0;
+        ce = 1'b0;
+        a = 0;
+        b = 0;
+
+        rst = 1'b1;
+		repeat (10) begin
+			#10;
+			clk = 1'b1;
+			#10;
+			clk = 1'b0;
+			#10;
+			clk = 1'b1;
+			#10;
+			clk = 1'b0;
+		end
+		rst = 1'b0;
+
+		repeat (10000) begin
+			clkcycle;
+            ce = 1; //$urandom & $urandom;
+			//rst = $urandom & $urandom & $urandom & $urandom & $urandom & $urandom;
+			a = $urandom & ~(1 << (SIZEIN-1));
+			b = $urandom & ~(1 << (SIZEIN-1));
+		end
+
+		if (errcount == 0) begin
+			$display("All tests passed.");
+			$finish;
+		end else begin
+			$display("Caught %1d errors.", errcount);
+			$stop;
+		end
+	end
+
+	macc2 ref (
+        .clk(clk),
+        .ce(ce),
+        .rst(rst),
+        .a(a),
+        .b(b),
+        .accum_out(REF_accum_out),
+        .overflow(REF_overflow)
+	);
+
+	macc2_uut uut (
+        .clk(clk),
+        .ce(ce),
+        .rst(rst),
+        .a(a),
+        .b(b),
+        .accum_out(accum_out),
+        .overflow(overflow)
+	);
+endmodule

tests/xilinx/mul_unsigned.v

@@ -0,0 +1,30 @@
+/*
+Example from: https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_1/ug901-vivado-synthesis.pdf [p. 89].
+*/
+
+// Unsigned 16x24-bit Multiplier
+// 1 latency stage on operands
+// 3 latency stage after the multiplication
+// File: multipliers2.v
+//
+module mul_unsigned (clk, A, B, RES);
+parameter WIDTHA = /*16*/ 6;
+parameter WIDTHB = /*24*/ 9;
+input clk;
+input [WIDTHA-1:0] A;
+input [WIDTHB-1:0] B;
+output [WIDTHA+WIDTHB-1:0] RES;
+reg [WIDTHA-1:0] rA;
+reg [WIDTHB-1:0] rB;
+reg [WIDTHA+WIDTHB-1:0] M [3:0];
+integer i;
+always @(posedge clk)
+ begin
+ rA <= A;
+ rB <= B;
+ M[0] <= rA * rB;
+ for (i = 0; i < 3; i = i+1)
+ M[i+1] <= M[i];
+ end
+assign RES = M[3];
+endmodule

tests/xilinx/mul_unsigned.ys

@@ -0,0 +1,10 @@
+read_verilog mul_unsigned.v
+proc
+hierarchy -top mul_unsigned
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mul_unsigned # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:DSP48E1
+select -assert-count 30 t:FDRE
+select -assert-none t:DSP48E1 t:FDRE t:BUFG %% t:* %D