intel_alm: add Cyclone 10 GX tests

tests/arch/intel_alm/add_sub.ys

@@ -6,3 +6,13 @@ cd top # Constrain all select calls below inside the top module
 stat
 select -assert-count 8 t:MISTRAL_ALUT_ARITH
 select -assert-none t:MISTRAL_ALUT_ARITH %% t:* %D
+
+design -reset
+read_verilog ../common/add_sub.v
+hierarchy -top top
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+stat
+select -assert-count 8 t:MISTRAL_ALUT_ARITH
+select -assert-none t:MISTRAL_ALUT_ARITH %% t:* %D

tests/arch/intel_alm/adffs.ys

@@ -12,6 +12,18 @@ select -assert-count 1 t:MISTRAL_NOT
 select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
 
 
+design -load read
+hierarchy -top adff
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd adff # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+select -assert-count 1 t:MISTRAL_NOT
+
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
+
+
 design -load read
 hierarchy -top adffn
 proc
@@ -23,6 +35,17 @@ select -assert-count 1 t:MISTRAL_FF
 select -assert-none t:MISTRAL_FF %% t:* %D
 
 
+design -load read
+hierarchy -top adffn
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd adffn # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+
+select -assert-none t:MISTRAL_FF %% t:* %D
+
+
 design -load read
 hierarchy -top dffs
 proc
@@ -35,6 +58,18 @@ select -assert-count 1 t:MISTRAL_ALUT2
 select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 %% t:* %D
 
 
+design -load read
+hierarchy -top dffs
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffs # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+select -assert-count 1 t:MISTRAL_ALUT2
+
+select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 %% t:* %D
+
+
 design -load read
 hierarchy -top ndffnr
 proc
@@ -46,3 +81,16 @@ select -assert-count 1 t:MISTRAL_NOT
 select -assert-count 1 t:MISTRAL_ALUT2
 
 select -assert-none t:MISTRAL_FF t:MISTRAL_NOT t:MISTRAL_ALUT2 %% t:* %D
+
+
+design -load read
+hierarchy -top ndffnr
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd ndffnr # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+select -assert-count 1 t:MISTRAL_NOT
+select -assert-count 1 t:MISTRAL_ALUT2
+
+select -assert-none t:MISTRAL_FF t:MISTRAL_NOT t:MISTRAL_ALUT2 %% t:* %D

tests/arch/intel_alm/counter.ys

@@ -9,5 +9,19 @@ cd top # Constrain all select calls below inside the top module
 select -assert-count 2 t:MISTRAL_NOT
 select -assert-count 8 t:MISTRAL_ALUT_ARITH
 select -assert-count 8 t:MISTRAL_FF
-
+select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT_ARITH t:MISTRAL_FF %% t:* %D
+
+
+design -reset
+read_verilog ../common/counter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -async2sync -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 2 t:MISTRAL_NOT
+select -assert-count 8 t:MISTRAL_ALUT_ARITH
+select -assert-count 8 t:MISTRAL_FF
 select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT_ARITH t:MISTRAL_FF %% t:* %D

tests/arch/intel_alm/dffs.ys

@@ -10,6 +10,17 @@ select -assert-count 1 t:MISTRAL_FF
 
 select -assert-none t:MISTRAL_FF %% t:* %D
 
+design -load read
+hierarchy -top dff
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dff # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+
+select -assert-none t:MISTRAL_FF %% t:* %D
+
+
 design -load read
 hierarchy -top dffe
 proc
@@ -19,3 +30,14 @@ cd dffe # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
 
 select -assert-none t:MISTRAL_FF %% t:* %D
+
+
+design -load read
+hierarchy -top dffe
+proc
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd dffe # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_FF
+
+select -assert-none t:MISTRAL_FF %% t:* %D

tests/arch/intel_alm/fsm.ys

@@ -18,3 +18,25 @@ select -assert-max 1 t:MISTRAL_ALUT4 # Clang returns 0, GCC returns 1
 select -assert-max 6 t:MISTRAL_ALUT5 # Clang returns 5, GCC returns 4
 select -assert-max 2 t:MISTRAL_ALUT6 # Clang returns 1, GCC returns 2
 select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_ALUT4 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
+
+design -reset
+read_verilog ../common/fsm.v
+hierarchy -top fsm
+proc
+flatten
+
+equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx
+async2sync
+miter -equiv -make_assert -flatten gold gate miter
+sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
+
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd fsm # Constrain all select calls below inside the top module
+
+select -assert-count 6 t:MISTRAL_FF
+select -assert-max 2 t:MISTRAL_ALUT2 # Clang returns 2, GCC returns 1
+select -assert-max 2 t:MISTRAL_ALUT3 # Clang returns 2, GCC returns 1
+select -assert-max 1 t:MISTRAL_ALUT4 # Clang returns 0, GCC returns 1
+select -assert-max 6 t:MISTRAL_ALUT5 # Clang returns 5, GCC returns 4
+select -assert-max 2 t:MISTRAL_ALUT6 # Clang returns 1, GCC returns 2
+select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_ALUT4 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D

tests/arch/intel_alm/logic.ys

@@ -9,3 +9,17 @@ select -assert-count 1 t:MISTRAL_NOT
 select -assert-count 6 t:MISTRAL_ALUT2
 select -assert-count 2 t:MISTRAL_ALUT4
 select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT2 t:MISTRAL_ALUT4 %% t:* %D
+
+
+design -reset
+read_verilog ../common/logic.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:MISTRAL_NOT
+select -assert-count 6 t:MISTRAL_ALUT2
+select -assert-count 2 t:MISTRAL_ALUT4
+select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT2 t:MISTRAL_ALUT4 %% t:* %D

tests/arch/intel_alm/lutram.ys

@@ -7,7 +7,7 @@ memory
 opt -full
 
 miter -equiv -flatten -make_assert -make_outputs gold gate miter
-sat -verify -prove-asserts -seq 5 -set-init-zero -show-inputs -show-outputs miter
+sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter
 
 design -load postopt
 cd lutram_1w1r
@@ -18,3 +18,24 @@ select -assert-count 8 t:MISTRAL_ALUT3
 select -assert-count 17 t:MISTRAL_FF
 select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_FF t:MISTRAL_MLAB %% t:* %D
 
+
+design -reset
+read_verilog ../common/lutram.v
+hierarchy -top lutram_1w1r
+proc
+memory -nomap
+equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v -map +/intel_alm/common/mem_sim.v synth_intel_alm -family cyclonev -nobram
+memory
+opt -full
+
+miter -equiv -flatten -make_assert -make_outputs gold gate miter
+sat -verify -prove-asserts -seq 3 -set-init-zero -show-inputs -show-outputs miter
+
+design -load postopt
+cd lutram_1w1r
+select -assert-count 16 t:MISTRAL_MLAB
+select -assert-count 1 t:MISTRAL_NOT
+select -assert-count 2 t:MISTRAL_ALUT2
+select -assert-count 8 t:MISTRAL_ALUT3
+select -assert-count 17 t:MISTRAL_FF
+select -assert-none t:MISTRAL_NOT t:MISTRAL_ALUT2 t:MISTRAL_ALUT3 t:MISTRAL_FF t:MISTRAL_MLAB %% t:* %D

tests/arch/intel_alm/mux.ys

@@ -1,15 +1,26 @@
 read_verilog ../common/mux.v
 design -save read
 
+
 hierarchy -top mux2
 proc
 equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux2 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT3
-
 select -assert-none t:MISTRAL_ALUT3 %% t:* %D
 
+
+design -load read
+hierarchy -top mux2
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux2 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT3
+select -assert-none t:MISTRAL_ALUT3 %% t:* %D
+
+
 design -load read
 hierarchy -top mux4
 proc
@@ -17,9 +28,19 @@ equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cycl
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux4 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT6
-
 select -assert-none t:MISTRAL_ALUT6 %% t:* %D
 
+
+design -load read
+hierarchy -top mux4
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux4 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT6
+select -assert-none t:MISTRAL_ALUT6 %% t:* %D
+
+
 design -load read
 hierarchy -top mux8
 proc
@@ -29,9 +50,20 @@ cd mux8 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT3
 select -assert-count 1 t:MISTRAL_ALUT5
 select -assert-count 2 t:MISTRAL_ALUT6
-
 select -assert-none t:MISTRAL_ALUT3 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
 
+
+design -load read
+hierarchy -top mux8
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux8 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT3
+select -assert-count 2 t:MISTRAL_ALUT6
+select -assert-none t:MISTRAL_ALUT3 t:MISTRAL_ALUT6 %% t:* %D
+
+
 design -load read
 hierarchy -top mux16
 proc
@@ -41,5 +73,17 @@ cd mux16 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT3
 select -assert-count 2 t:MISTRAL_ALUT5
 select -assert-count 4 t:MISTRAL_ALUT6
+select -assert-none t:MISTRAL_ALUT3 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D
+
+
+design -load read
+hierarchy -top mux16
+proc
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mux16 # Constrain all select calls below inside the top module
+select -assert-count 1 t:MISTRAL_ALUT3
+select -assert-count 2 t:MISTRAL_ALUT5
+select -assert-count 4 t:MISTRAL_ALUT6
 
 select -assert-none t:MISTRAL_ALUT3 t:MISTRAL_ALUT5 t:MISTRAL_ALUT6 %% t:* %D

tests/arch/intel_alm/quartus_ice.ys

@@ -10,3 +10,17 @@ EOT
 
 synth_intel_alm -family cyclonev -quartus
 select -assert-none w:*[* w:*]*
+
+design -reset
+read_verilog <<EOT
+// Verilog has syntax for raw identifiers, where you start it with \ and end it with a space.
+// This test crashes Quartus due to it parsing \a[10] as a wire slice and not a raw identifier.
+module top();
+  (* keep *) wire [31:0] \a[10] ;
+  (* keep *) wire b;
+  assign b = \a[10] [31];
+endmodule
+EOT
+
+synth_intel_alm -family cyclone10gx -quartus
+select -assert-none w:*[* w:*]*

tests/arch/intel_alm/shifter.ys

@@ -6,5 +6,16 @@ equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 select -assert-count 8 t:MISTRAL_FF
-
+select -assert-none t:MISTRAL_FF %% t:* %D
+
+
+design -reset
+read_verilog ../common/shifter.v
+hierarchy -top top
+proc
+flatten
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+select -assert-count 8 t:MISTRAL_FF
 select -assert-none t:MISTRAL_FF %% t:* %D

tests/arch/intel_alm/tribuf.ys

@@ -9,5 +9,19 @@ design -load postopt # load the post-opt design (otherwise equiv_opt loads the p
 cd tristate # Constrain all select calls below inside the top module
 #Internal cell type used. Need support it.
 select -assert-count 1 t:$_TBUF_
-
+select -assert-none t:$_TBUF_ %% t:* %D
+
+
+design -reset
+read_verilog ../common/tribuf.v
+hierarchy -top tristate
+proc
+tribuf
+flatten
+synth
+equiv_opt -assert -map +/simcells.v synth_intel_alm -family cyclone10gx # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd tristate # Constrain all select calls below inside the top module
+#Internal cell type used. Need support it.
+select -assert-count 1 t:$_TBUF_
 select -assert-none t:$_TBUF_ %% t:* %D