yosys/tests/asicworld/code_hdl_models_cam.v

61 lines
1.7 KiB
Verilog
Raw Permalink Normal View History

2013-01-05 04:13:26 -06:00
//-----------------------------------------------------
// Design Name : cam
// File Name : cam.v
// Function : CAM
// Coder : Deepak Kumar Tala
//-----------------------------------------------------
module cam (
clk , // Cam clock
cam_enable , // Cam enable
cam_data_in , // Cam data to match
cam_hit_out , // Cam match has happened
cam_addr_out // Cam output address
);
parameter ADDR_WIDTH = 8;
parameter DEPTH = 1 << ADDR_WIDTH;
//------------Input Ports--------------
input clk;
input cam_enable;
input [DEPTH-1:0] cam_data_in;
//----------Output Ports--------------
output cam_hit_out;
output [ADDR_WIDTH-1:0] cam_addr_out;
//------------Internal Variables--------
reg [ADDR_WIDTH-1:0] cam_addr_out;
reg cam_hit_out;
reg [ADDR_WIDTH-1:0] cam_addr_combo;
reg cam_hit_combo;
reg found_match;
integer i;
//-------------Code Starts Here-------
always @(cam_data_in) begin
cam_addr_combo = {ADDR_WIDTH{1'b0}};
found_match = 1'b0;
cam_hit_combo = 1'b0;
for (i=0; i<DEPTH; i=i+1) begin
if (cam_data_in[i] && !found_match) begin
found_match = 1'b1;
cam_hit_combo = 1'b1;
cam_addr_combo = i;
end else begin
found_match = found_match;
cam_hit_combo = cam_hit_combo;
cam_addr_combo = cam_addr_combo;
end
end
end
// Register the outputs
always @(posedge clk) begin
if (cam_enable) begin
cam_hit_out <= cam_hit_combo;
cam_addr_out <= cam_addr_combo;
end else begin
cam_hit_out <= 1'b0;
cam_addr_out <= {ADDR_WIDTH{1'b0}};
end
end
endmodule