* The Hurricane python module was not compiled at all. The name of
Python module wrappers is a bit inconsistent:
isobar --> Hurricane
crlcore --> CRL
anabatic --> Anabatic
katana --> Katana
* Use "py_mod_deps" and not only "py_deps" so the __PYTHON_MODULE__
flag is used for py.extension_module().
* In cumulus, the "cumulus" directory is not used for the installation
in site-packages/coriolis/.
* In designflow/pnr.py, temporarily disable Tramontana & Tutorial,
until they are ported to meson.
* New: In boostrap/FindBootstrap.cmake, add a macro setup_qt() to
share Python detection across the various tools.
This macro takes into account the USE_MANYLINUX variable to
slightly change the Python detection. On a "normal" system we
look for "Development" (search for dynamic libraries) while under
manylinux we look for "Development.Module"(static linking).
* Change: In bootstrap/ccb.py, add a new option --manylinux.
* Change: Cleanup in the various CMakeLists.txt to use setup_qt().
* Bug: In Interval::intersect(), bad condition check in strict mode.
* Change: In Occurrence::operator<(), change the sorting criterions
so that the ones with no paths are "lower", then the one with
no entities, then compare entities Id then Path hashes.
* Change: In Occurrence::getCompactString(), to be more readable,
suppress leading and ending "<>".
* Change: In IntervalTree, now use an IntervalDataCompare to control
the ordering of the nodes inside the tree. This may be needed
when IntervalData is build upon a pointer, we don't want to
sort on pointer values (non deterministic) .
* Bug: In IntervalTree::postRemove(), there was an incorrect computation
of the updated childsVMax.
* Bug: In IntervalTree::beginOverlaps(), miscalculated leftmost
interval overlapping.
* Bug: In RbTree::remove(), when exchanging the removed node for a
leaf, fully swap the nodes contents, was incompletly copied before.
* New: In CellWidget, add new slots selectSet(OccurrenceSet&) and
unselectSet(OccurrenceSet&), to be able to select/unselected sets
of Occurrence (for use by TabEquipotentials).
* Change: In EtesianEngine, no more need to remove leading/ending "<>".
* New: In Tramontana, use a Query to find all the Occurrence under
an area. Previously we were using Cell::getOccurrencesUnder()
which *do not* return the components in instances, so we would
have been unable to find trans-hierarchical shorts circuits.
* New: In tramontana, now use a Relation to tag all the components
belonging to an Equipotential.
* Change: In Equipotential, store everything under the form of
Occurrence, instead of Components. Due to the way the Occurrences
are sorted, the one holding Components should be firts.
* Change: In Etesian::BloatChannel, when two DFFs are side by side, if
they are not separated by at least one pitch, the track avoid
mechanism will not be able to work. Hence the minimal one pitch.
* Change: In Etesian::SubSlice::getUsedVTracks(), now take blockages
into account for used vertical tracks.
* Bug: In Etesian::SubSlice::avoidTrack(), right free interval for
shifting was wrongly computed, effectively allowing *any* shift.
This was creating cells overlap!
* New: In Hurricane::BasicLayer & Layer, establish a two way link
between the blockage layer and routing layer. Now we can access
the routing layer from the blockage.
* New: In NetBuilderHybridVH::_do_1G_xM1_1PinM1(), added configuration
to manage pins on the north/south sides for VH,2RL.
* Bug: In NetBuilderHybridVH::doRp_xG_xM1_xM3(), correct misplaced
vertical creation (buildind invalid topologies).
* New: EtesianEngine::toColoquinte(), display histograms of the cells
widths (in pitch) before and after bloating to get a better feeling
of the behavior.
* New: In EtesianEngine, add support for track avoidance. Portions of
tracks to avoid are specified by a Box, which should flat and on
the axis of the request track. This feature is used by the H-Tree
to clear the vertical tracks under the tree from any terminal.
* New: In Etesian::Area, Slice and SubSlice, add support for track
avoidance. Exported to the Python wrapper.
* New: SubSlice::getUsedVTracks() to get a set of tracks blocked by
the cell.
* New: SubSlice::trackAvoid(), shift left/rigth the cell under the
requested vertical track. Try only to move the cell under the
track and not it's neighbor, so it assume that there is sufficient
space left or right of the cell.
* Bug: In cumulus/plugins.block.configuration.BlockConf, the Cfg
parameters may be read too early from the Cfg space into the
various sub-conf objects (like FeedsConf). Delay the reading
of the parameters in a _postInit() functions.
Modify Block and CoreToChip to call _postInit().
* New: In cumulus/plugins.block.configuration.BlockConf._loadRoutingGauge,
allow the cell gauge name to differ from the routing gauge name.
* New: In cumulus/plugins.block.configuration.FeedsConf, allow to
select the default feed to be used with 'etesian.defaultFeed'
parameter.
* New: In cumulus/plugins.block.spares.BufferPool, allow to control
whether or not we want tie to either side of the pool.
(for latch up).
* New: In cumulus/plugins.block.HTree._connectLeaf(), add support
for track avoidance.
* Bug: In cumulus/plugins.block.HTree._connectLeaf(), the TL2 contact,
the one on the *top* auxiliary buffer seemed to have been badly
positioned until now (too low, not using tl2Y).
This is strange because it should have caused disconnections,
but I didn't see it in the wiring and the regressions tests didn't
flag anything wrong. Still a bit weird and worrying.
Previously, the relevant NetBuilder and routing strategies where
directly guessed from the RoutingGauge traits. This is no longer
doable as the combinations increases. Now to configure both the
global and detailed router we need three "parameters" :
1. The routing gauge itself (tells which layers are in which
directions) and how to make the VIAs.
2. The NetBuilder to use, they are identified by strings.
Currently we support:
* "HV,3RL+", for all SxLib derived standard cells.
* "VH,2RL", for hybrid routing (over the cell, but terminals
are also in the first RL).
* "2RL-", for strict channel routing.
* "VH,3RL+", an attempt for FreePDK 45, not optimized enough
to be considered as usable.
3. The routing style, mostly affect the way the GCell grid will be
built.
* VH : first RL is V.
* HV : first RL is H.
* OTH : Run in full over-the-cell mode (needs at least 3RL).
* Channel : Run in *strict* channel routing mode (no routing over
the standard cells).
* Hybrid : Create channels, but can use H tracks over the
standard cells.
Thoses three parameters are partly overlapping and must be sets in
a consistent manner, otherwise strange results may occurs.
* New: CRL::RoutingGauge::getFirstRoutingGauge(), to get the lowest
layer available for routing (not a PinOnly, not a PowerSupply).
* Change: In CRL::RoutingGauge::isHV() and isVH(), were previously
always returning false when the gauge was 2RL only. Now, check
on the first usable RL.
* Bug: In cumulus/plugins.block.configuration._loadRoutingGauge(),
there was a bad computation of the deep RLs when the top layer
was not defined. Occured for 2RL gauges only.
* Bug: In Anabatic::RpsInRow::slacken() (LayerAssign), forgotten curly braces
in the test to skip METAL2 terminals.
* Change: In Etestian::BloatChannel::getDx(), adjust the bloating
policy to converge on Arlet6502. Always ensure that there is
a 50% ratio between terminal used V-tracks and free ones.
If there is more than 80% of terminals, add one more track.
* Bug: In AnabaticEngine & KatanaEngine, KatanaEngine is a derived
class of AnabaticEngine. They uses Anabatic::Configuration
and Katana::Configuration that also derives from each other.
I though I had made one configuration attribute in the base
class that was using the right Configuration. But no. I did
have two configurations attributes, one in AnabaticEngine and
one in KatanaEngine, the later "shadowing" the former. As a
results, parameters modified in AnabaticEngine, *after* the
initial creation of the tool *where never seen* at Katana
level (due to it's own duplicate). What a mess.
Now there is only one attribute in the *base* class Anabatic,
which is created through a new virtual function _createConfiguration()
called in _postCreate() which allocate the right Configuration
according to the dynamic type of the tool (KatanaEngine).
In KatanaEngine, access the configuration through the
attribute (_configuration) and not the accessor (getConfiguration()).
* Bug: In KatanaEngine, no longer directly use the _configuration attribute
(which is not accessible anyway) but the getConfiguration() accessor.
The accessor perform a static_cast from the Super::getConfiguration()
into Katana::Configuration.
Complete cleanup of the various configuration accessors.
* New: AnabaticEngine::setupNetBuilder(), perform an early check
of the requested NetBuilderStyle. The NetBuilderStyle is just a
string that will be matched against the (hard-coded) supported
NetBuilders. Then check the topological characteristics against
the capabilities of the gauge (HV, VH and so on).
Still a bit too hard-coded for now.
This function has been split from AnabaticEngine::_loadGrByNet().
* Change: AnabaticEngine::isChannelStyle() renamed from isChannelMode().
* New: In Anabatic::Configuration, two new attributes to select the
topology and routing style:
- _netBuilderStyle to explicitely select the NetBuilder to use.
It's a string, which is provided by each NetBuilder.
- _routingStyle to define how the overall routing will work.
It's a set of flags (StyleFlags):
* VH : first RL is V.
* HV : first RL is H.
* OTH : Run in full over-the-cell mode (needs at least 3RL).
* Channel : Run in *strict* channel routing mode (no routing over
the standard cells).
* Hybrid : Create channels, but can use H tracks over the
standard cells.
* New: In anabatic/Constants, add StyleFlags to define how the router
should operate (see above).
* Bug: In Anabatic::GCell, in CTOR, no reason to set up the HChannelGCell flag.
* Bug: In Anabatic::GCell::updateDensity(), when computing layers non contiguous
saturation, do not systematically skip RL 0, but only if it's PinOnly.
* Change: In Anabatic::NetBuilder, rename isTwoMetal by isStrictChannel.
* Change: In Anabatic::NetBuilderHV, rename doRp_AccessNorthPin() in
doRp_AccessNorthSouthPin(). More accurate.
* Bug: In NetBuilderHV::_do_1G_xM1_1PinM2(), the wires to connect the M1
terminals where created *twice*. Uterly stupid, there where placed in
overlap by the router!
* New: In AnabaticEngine, new accessors to the NetBuilderStyle and
RoutingStyle, proxies towards Configuration.
* Bug: In Manipulator::relax(), if there are two doglegs to be done, but
they are in the same GCell, only do one (the conflicting interval)
is short.
* Change: In Katana::Session, rename isChannelMode() into isChannelStyle().
* Change: In TrackSegment::isUnbreakable() and isStrap(), return false
when the base segment is a *weak global* (aligned with a global one).
* Change: In Katana::Row::createChannel(), correctly distinguish between
*strict channel* style and *hybrid* style. Tag the GCells as std cells
row or channels only in the former case.
* New: In Hurricane::RoutingPad, added support if the supporting component
is a Pad. The source/target positions are computed according to the
most likely direction.
Change the _getEntityAsComponent() function into an inline template
_getEntityAs<T>().
Change the flags from an enum to static const uint32_t.
* Change: In Anabatic::Configuration, use _getEntityAs<T>.
* Change: In Anabatic::Dijkstra, use _getEntityAs<T>.
* Change: In Anabatic::NetBuilder, use _getEntityAs<T>.
* Change: In Katabatic::LoadGrByNet, use _getEntityAs<T>.
* Change: In Katana::ProtectRoutingPads, use _getEntityAs<T>.
* Change: In Bora::AnalogDistance, use _getEntityAs<T>.
* Change: In Etesian::EtesianEngine, use _getEntityAs<T>.
* Update: In CRL/node600/phenitec/kite.py, update the routing gauge to
the new format. So now we can use again SxLib-2M (channel routing
SxLib for two metal technologies).
* Change: In CRL::BlifParser, if a master cell is not found in the
AllianceFramework, then try in the Blif supplied libraries.
This is used to load the zero, one and tie cells.
Add a Blif::getCell() static function to look into the Blif
supplied libraries.
* Change: In CRL::LefImport, sometimes there can be discrepencies between
the LEF ROUTING layers and the Coriolis routing gauge. Now ignore
routing layers that are *not* presents in the Coriolis gauge.
* Change: In AnabaticEngine, moved routingMode attribute from KatanaEngine,
as some setup operations needs it.
* Change: In AutoSegment::canReduce(), allow fixed segments to be reduced
if they are "jumpers" (turn+turn and top+top or bot+bot).
This case arise on the edge of routing channels for fixed wires
to connect terminals.
* Change: In AutoSegment::getTopologicalinfos(), compute differently the
(leftBound,rightBound) interval when in channel mode.
In over-the-cell mode, this interval is the one of the whole
GCells under the wire. In channel mode, for fixed wires (that is,
verticals connecteds to cells) this interval is reduced to half
the GCell height, on the connected side of said channel.
This allows Manipulator::_insertToTrack() to issue disantangling
requests (push left/push right) for fixed segments that are face
to face in the channel.
* Change: In Anabatic::Configuration CTOR, allow the cellGauge to have a
different name from the routingGauge. Now if the cell gauge that
should match the routing gauge is not found, fallback to the
name set in "anabatic.cellGauge" parameter.
Case occur when we try to match with CORE sites from LEF files.
* Change: In Etesian::Configuration CTOR, same change as in the
Anabatic configuration.
* Change: In Anabatic::GCell::updateDensity(), never set the GoStraight
flag in channel mode. This flag makes sense when there is at least
4 routing layers (so we have 2 contiguous free of blockages).
* Bug: In Anabatic::Session::_getNearestGridpoint(), sometimes the nearest on
grid point is outside the constraint box. Now force the point
to remains inside constraints even if offgrid.
* Change: In Katana::DataNegociate::update(), perpandiculars that are
either reduced or in non-preferred routing direction should not
trigger a bug message.
* Change: In KatanaEngine::_check(), do not check for fixed, horizontal
non-prefs AutoSegments in channel mode (avoid false bug display).
* Bug: In Manipulator::_forceToTrack(), slighty shrink (-1) the interval
to free. The intersection function of intervals returns true when
the two intervals *exactly* touches (1.vMax == 2.vMin). But in
this specific case, they are not *overlapping* and no action
should be taken...
* Bug: In Manipulator::_insertInTrack(), do not reject the track when
we are overlapping a fixed vertical segment in channel mode.
(Hmm, maybe already corrected by the previous one).
* Change: In Katana::NegociateOverlapCost(), in channel mode, do
not put two overlaping vertical fixed segments into infinite cost.
This happens when two cell connected verticals are face to face in
a channel. We want them negociated the track (by shrinking their
length) instead of excluding it right away.
* Change: In NegociateWindow::createTrackSegment(), in channel mode,
do not attempt to create a track segment over a fixed and reduced
AutoSegment.
Do not attempt to put a non-preferred AutoSegment on a Track
either.
* Bug: In RoutingEvent::revalidate(), the number of availables tracks
was badly computed when in the pure constraint case, when there
was only one it was reporting zero.
* Change: In TrackElements::TrackElements_Perpandicular::Locator,
do not issue a bug when an non-pref or reduced AutoSegment do not
have an associated TrackElement.
* Change: In TrackSegmentCost::update(), do not issue a bug when a
perpandicular is reduded or non-pref and do not have a TrackElement.
Jean-Paul Chaput
Rob Taylor
Gabriel Gouvine