Commit Graph

13 Commits

Author SHA1 Message Date
Jean-Paul Chaput a033e3ba98 More doc unification and cleanup. 2017-07-17 19:12:18 +02:00
Jean-Paul Chaput b209871ee6 Update copyright to 2016 for Knik, Katabatic & Kite. 2016-03-06 12:36:18 +01:00
Jean-Paul Chaput 9db97608cb More clever way of taking into account constraints on caged terminals.
* Change: In vlsispad, in Dots, add an enable/disable flag because when printing
    into a cmess, it is only the base class ostream which is took into account
    as none of it's methods are virtuals (silly me).
* Bug: In Etesian, print into cmess instead of cout and make use of the Dots
    enabling feature.
* New: In Katabatic, added AutoContact::migrateConstraintBox() to transfert
    constraint from one contact to another.
      New flag for AutoContact, CntWeakTerminal for AutoContact which are at
    the other of a segment directly connected to a terminal. They may hold
    special constraints in case of caged terminals (computed in Kite).
      In AutoHorizontal & AutoVertical, in ::_makeDogleg(), transfert flags
    and constraints when breaking a segment directly connected to a terminal.
* New: In Kite, in protectCagedTerminals(), uses cross constraint on the
    AutoContact opposite to the ContactTerminal (CntWeakTerminal) instead
    of moving up one terminal over two consecutives. This is simpler without
    degrading the routing quality.
2015-08-18 15:42:28 +02:00
Jean-Paul Chaput ed557d9027 Added support for "same layer" dogleg. Big fix for pad routing.
* Change: In Knik, in Vertex, add a "blocked" flag to signal disabled
    vertexes in the grid (must not be used by the global router).
      Modificate the Graph::getVertex() method so that when a vertex
    is geometrically queried, if is a blocked one, return a non-blocked
    neighbor. This mechanism is introduced to, at last, prevent the
    global router to go *under* the pad in case of a commplete chip.
* New: In Katabatic, in AutoSegment, a new state has been added: "reduced".
    A reduced segment is in the same layer as it's perpandiculars.
    To be reduced, a segments has to be connected on source & target to
    AutoContactTurn, both of the perpandiculars must be of the same layer
    (below or above) and it's length must not exceed one pitch in the
    perpandicular direction.
      To reduce an AutoSegment, call ::reduce() and to revert the state,
    call ::raise(). Two associated predicates are associated:
    ::canReduce() and ::mustRaise().
      Note: No two adjacent segments can be reduced at the same time.
* Bug: In Katabatic, in GCellTopology, add a new method ::doRp_AccessPad()
    to connect to the pads. Create wiring, fixed and non managed by
    Katabatic, to connect the pad connector layer to the lowest routing
    layers (depth 1 & 2). The former implementation was sometimes leading
    to gaps (sheared contact) that *must not* occurs during the building
    stage.
      Remark: This bug did put under the light the fact that the initial
    wiring must be created without gaps. Gaps are closed by making doglegs
    on contacts. But this mechanism could only work when the database if
    fully initialised (the cache is up to date). Otherwise various problems
    arise, in the canonization process for example.
* New: In Katabatic, in AutoContactTerminal::getNativeConstraintBox(),
    when anchored on a RoutingPad, now take account the potential rotation
    of the Path's transformation. Here again, for the chip's pads.
* New: In Kite, support for reduced AutoSegment. TrackSegment associateds
    to reduced AutoSegment are *not* inserted into track to become
    effectively invisibles. When a segment becomes reduced, a TrackEvent
    is generated to remove it. Conversely when it is raised a RoutingEvent
    is created/rescheduled to insert it. All this is mostly managed inside
    the Session::revalidate() method.
* New: In Kite, in KiteEngine::createGlobalGraph(), in case of a chip,
    mark all global routing vertexes (Knik) that are under a pad, as blockeds.
* Bug: In Cumulus, in PadsCorona.Side.getAxis(), inversion between X and
    Y coordinate of the chip size. Did not show until a non-square chip
    was routed (i.e. our MIPS R3000).
* Change: In Stratus1, in st_placement.py add the ClockBuffer class for
    backward compatibility with the MIPS32 bench. Have to review this
    functionnality coming from the deprecated placeAndroute.py.
      In st_instance.py, no longer creates the Plug ring of a Net.
    In my opinion it just clutter the display until the P&R is called.
    Can re-enable later as an option (in Unicorn).
* Change: In Unicorn, in cgt.py, more reliable way of loading then running
    user supplied scripts. Borrowed from alliance-checker-toolkit doChip.py	.
2015-08-16 23:29:28 +02:00
Jean-Paul Chaput 5dc60415e7 Happy new year 2015! 2015-03-17 16:56:55 +01:00
Jean-Paul Chaput 6939025a0d Correction of SoC.css, adjust the look of the class index big letters. 2014-06-10 00:04:48 +02:00
Jean-Paul Chaput 2dd36b9624 Support of RoutingGauge, part 2.
In Katabatic & Kite, remove all hard-coded values related to track pitches.
* New: In <Session>, add more convenience function to access RoutingGauge
    characteristics.
* New: In <AutoSegment>, <AutoContact>, add support for the "depth spin",
    that is, if the source/target contacts are going "top" or "down".
    Used to compute the perpandicular pitch. Need a small modification
    of the revalidation mechanism. The observers of <AutoSegment> are
    notified when the spin changes.
* New: In <AutoSegment>, the getPPitch() method allow to compute the
    "perpandicular pitch". For now it is simply the greatest from the
    source perpandicular pitch and the target perpandicular pitch.
    Make uses of the "depth spin".
* New: In <TrackElement>, <TrackSegment>, cache the perpandicular pitch.
    Updated through the notification from the observable.
2014-05-19 17:58:38 +02:00
Jean-Paul Chaput dda3f99fd8 Update documentation for compliance with doxygen 1.8.5.
When upgrading from doxygen 1.5.x to 1.8.5 the way the documentation
is generated has underwent many changes, particularly in the headers.
* Change: In <header.html>, must include the javascripts <jquery.js>
    and <dynsections.js>.
* In <CMakeLists.txt>, as the header is customized, doxygen seems not
    copy some files like the javascripts and some images (open.png,
    closed.png). So we copy them from doxygen installation and make
    the CMakeLists.txt install them. I hope they will not change too
    much in the future.
* In <doxyfile>, disable markdown support as it do not interpret
    correctly the formating we already adopted (with a left margin
    to put command into). Use HTML_EXTRA_STYLESHEET instead of
    HTML_STYLESHEET. Enable the index (DISABLE_INDEX=NO), for the
    top header. Enable dot for inheritance diagram. Set the
    EXAMPLE_PATH=. to include the synthetic hierarchy.
    Correct the tag inclusion (faulty path in some places).
* In <SoC.css>, create style for the new header generated by doxygen.
* In the documentation, move the synthetic hierarchy into a module.
2014-05-13 16:30:41 +02:00
Jean-Paul Chaput 34e0edfd61 Cleanup after SVN importation, <ccb> builder script adaptation.
Project hierarchy reorganisation:
* With svn, we were doing a tool by tool checkout, suppressing the
  whole repository hierarchy level.
* The tools were also grouped, inside one repository, into multiple
  projects (<bootstrap>, <vlsisapd>, <coriolis>).
* We do not want to split up each tool into a separate repository,
  given their tight integration (except for vlsisapd).
* We choose to simplify, and consider all tools in a svn repository
  one project. Due to the way Git clone repositories, the directory
  containing the project is now to be seen under "src/".

CMake modifications:
* Now that the <vlsisapd> and <bootstrap> projects are merged into
  coriolis, modificate the top CMakeLists.txt of each tool to uses
  only Coriolis (and bootstrap hard wired).

CCB compile script modifications:
* Uses the new source tree hierarchy, with the project directory
  inserted.
* Remove (comment) all parts relateds to svn managment.
* Git is sufficiently simple so that we do not want to integrate
  command shortcut into the script.

SVN cleanup:
* Remove the obsolete <chamsin> tool, that has become the full fledged
  <chams> project long time ago.
2014-02-26 18:24:41 +01:00
Jean-Paul Chaput 00975e1ad1 * ./katabatic:
- New: Whole replacement by Katabatic3.
2013-12-04 00:58:58 +00:00
Jean-Paul Chaput 8697a7cde6 * All tools:
- Change: adopt a tree layout compliant with the UNIX FHS.
        * includes under      TOP/include/coriolis2.
        * shared datas under  TOP/shared/coriolis2.
        * docs under          TOP/share/doc/coriolis2.
        * configuration under TOP/etc/coriolis2

  * ./crlcore:
    - Change: In Environment, comply to the new tree layout, search configuration
        files under TOP/etc/coriolis2/.

  * ./knik:
    - Change: In flute, comply to the new tree layout, get the "POW*.dat" files
        from TOP/share/coriolis2/flute-2.4.
2010-05-18 12:53:08 +00:00
Jean-Paul Chaput a67d6ecf63 * All tools:
- Change: In the CMakeLists.txt, in all the install commands remove all
        the leading "/" as they prevents the CMAKE_INSTALL_PREFIX to be took
        into account. It was nevertheless working because buildCoriolis.py was
        using DESTDIR which is prepended anyway.
  * ./goodies:
    - Change: In buildCoriolis.py, no longer uses the DESTDIR but instead
        CMAKE_INSTALL_PREFIX.
2010-05-16 16:34:08 +00:00
Jean-Paul Chaput 360ff0424e * ./hurricane/src/hviewer,
./coriolis/src/crlcore,
     ./coriolis/src/knik,
     ./coriolis/src/katabatic,
     ./coriolis/src/kite,
     ./coriolis/src/equinox,
     ./coriolis/src/solstice,
     ./coriolis/src/ispd:
     - SVN MOVE: Source tree simplification & uniformisation. Now all tools
         are at the same level, directly under the root of the repository.
         No more "coriolis/src".
2010-03-09 15:24:29 +00:00