- New: In RoutingEvent, while routing a full chip, transient full blockages
may happens due to the initial position of some perpandiculars on theirs
optimal positions. Check for it and perform a "ripupPerpandicular" with
the perpandiculars re-routed first (on normal operation, this is the
reverse).
- Change: In NegociateWindow::NegociateOverlapCost(), do not account terminals
if the layer is *above* METAL3 as it is unlikely that it's truly directly
connected to a terminal (true at least for our designs).
- Change: In RoutingEvent::State, add a "fullBlocked" flag to perform the
full blockage direction while building the state object.
- Change: In RoutingEvent::cacheAxisHint(), when the TrackSegment has parent,
uses the parent current axis position and not it's axis hint.
- Change: In Manipulator::insertInTrack(), when the overlapped segment is a
Local and is completly enclosed (shrinkLeft & shrinkRight), no longer
rip it up but force a shrink left/right instead.
- Bug: In RoutingEvent, the event sorting function was sorting in the *wrong*
order! The less prioritary first! With the correct sort, we won an
additionnal 30% in speed (total: 69%). From the "reference" time we have
a 3.2 speed-up. And we can successfully process denser designs...
- New: In BuildPowerRails, special processing for the power ring segments.
The "diagonal" of vias at each corner is causing a misbehavior of the
routing algorithm (due to fully saturated GCells in one direction).
As a temporary fix, extend the segments so they form a "square corner".
(problem arise on "d_in_i(22)").
- New: In RoutingEvent::_processNegociate, disable the "isForcedToHint()"
feature. No noticeable loss of quality or speed.
- New: In TrackElement/TrackSegment, wraps the AutoSegment parent's mechanism.
Allows to gets the DataNegociate of either the segment or it's parent.
- New: State::solveFullBlockages(), dedicated method to solves the case when
all the allowed tracks of a segment are blocked, tries to moves up
local segments and to break-up global ones.
- New: RoutingEventLoop, a more sophisticated way to detect looping.
Maintain a dynamic histogram of the last N (default 10) segments routeds,
with the count of how many times they have occurred. If that count
exeed 40, we *may* be facing a loop.
- Change: In State::conflictSolve1, implement new policy. The global segments
no more can be broken by local ones. The idea behind is that breaking
a global on the request of a local will only produce more cluttering
in the GCell. Globals must be keep straigth pass through, especially
inside near-saturated GCells. Globals breaking however can occurs at
another global's request.
- Change: In TrackCost, implement the new policy about locals segments that
cannot break globals segments. The sorting class now accept flags to
modulate the sorting function. Two options avalaibles: IgnoreAxisWeigth
(to uses for strap segments) and DiscardGlobals (to uses with locals).
- Change: In TrackCost, the "distance to fixed" have now an upper bound of
50 lambdas (no need to be greater because it means it's outside the
begin & en GCells). Take account not only of fixed segment, but also
of placed segments which makes bound.
- Bug: In Track::_check(), while calling each individual TrackSegment check,
uses it as the *first* argument of the "or", otherwise it may not be
called.
- Bug: In ProtectRoutingPad, loop over segment Collections while modificating
it was producing non-deterministic results. The fact that a collection
must be not modificated while beeing iterated is becoming a more and more
painful problem.
- Change: Big cleanup. Supress all the GCell level: GCell, GCellGrid,
GCellRoutingSet. Blockages now managed inside the BuildPower.
- New: In NegociateWindow, Histogram of GCell densities in Gnuplot
format.
- Change: Propagate renaming "obstacle" -> "blockage".
- Bug/Change: In Configuration, the value of the extensionCap was too big
(1.5 lambda), reduce to 0.5 lambda. This is a problem, the extension
should be coupled to the layer as it is not the same for each METAL.
- Bug: When using TrackElement, always uses the virtual "->isFixed()" method
instead of trying to access to "->base()->isFixed()" as the base may be
NULL in case of blockage/fixed segment.
- Change: Merge PowerRails & Blockage trans-hierarchical construction (into
PowerRails). All blockages are groupeds under "blockagenet".
Allows to remove TrackBlockage & BuildBlockages.
- Change: In KiteEngine::annotateGloblalGraph(), when routing a full chip,
ring power segments around the core must completly saturate the edges
in their segment direction. This is to prevent the global router to
use paths under the power/ground ring (may generate unsolvable configs).
- Change: In KiteEngine::annotateGloblalGraph(), when routing a full chip,
distinguish three areas: the core (65%), the corona (90%) and the pads
(100%). Capacities on the edges are sets accordingly.
- Change: In RoutingEvent, introduce an alternative algorithm for
conflictSolve1, FindPath which try to deduce the breakpoints from a
truly explorated path. Unfortunatly this gives worst results than the
Cs1Candidates method. The why should be investigated as it's a critical
point in the algorithm.
- Change: In Manipulator::ripupPerpandicular(), when a caged perpandicular
is encountered, instead of just "stopping", rip it up and change is
axis hint (actually increase) it's axis hint so it stands a chance to
go outside the track with an obstacle.
- Change: In RoutingEvent/State::slackenTopology(), allow move up of local
segments when they are tightly constrained *and* blocked (cageds).
Partial modification of functions calls from booleans to flags.
- Bug: In NegociateWindow::NegociateOverlapCost, check for fixed segments
before trying to get DataNegociate. The lack of DataNegociate cause the
TrackElement to be discarted. It's a failsafe behavior, but it leads to
overlaps.
- Bug: In ProtectRoutingPad, in Pad Cells only, *do not* protect RoutingPad
to avoid the edge capacity over the pad to decrease to zero. This is
due to unused RoutingPads being accounted as blockages.
- New: In Configuration & RoutingEvent, adds support for minimal break length
by layer (METAL1 through METAL7).
- New: Added measures for final detailed wirelength, wirelength expansion ratio,
failed wirelength, number of processeds events and number of unique events.
- Change: In TrackCost, the ripup cost is now computed from a mix between
the number of ripup *and* the data state. Restore a correct balance
of the ripping up between segments.
- New: In RoutingEvent::State::conflictSolve1(), when a very long Segment
enters in conflictSolve1(), still prefers to move it up in one piece,
but if it's not possible, it is unlikely that it will overlap with
only one or two other Segment. In that cases, blindy break it up in
the middle.
- New: In RoutingEvent::Manipulator, another overload of makeDogLeg to
allow break up at one precise point.
- Change/Bug: In RoutingEvent::Manipulator::Relax(), reset the state of
the non-overlapping Segment fragments instead of inheriting blindly
of the state of the breaked up one. Gives some supplemental slack
that allows to converge.
- Note: Now the strategy is to disable the uses of GCellRoutingSet by
setting the expand step to 0.99. This induces only a slight slow
dow and memory increase and passes all the tests...
- Mark: This revision passes all the benches except for idct, vld &
ieee_division.
- Bug: In top CMakeLists.txt the SETUP_PROJECT_PATHS was not inserting
X_USER_TOP *before* X_TOP, thus potentially allowing an obsolete
system-wide configuration to shadow an up-to-date local one.
* ./kite:
- Change: In Configuration/KiteEngine, propagate changes in Configuration
in Kite. Note that a *second* singleton is created at Kite level.
- New: KiteEngine::printConfiguration() method to allow quick checks of
the router's main parameters.
- New: ConfigurationWidget to display/sets all the revelant Katabatic/
Kite configuration parameters. To be used with the TabSettings from
the ControllerWidget.
The ConfigurationWidget is bound to the default (static) Kite
configuration, as once it has been run you obviously cannot change the
router's settings.
- Change: In TrackFixedSegment, when the source/target coordinates of the
fixed segment are outside the grid (i.e. the Cell Abutment Box) truncate
them.
- Change: In GCell::addTrackSegment, when looking for overlap between the
to be inserted TrackSegment and Blockage segment, shrink the Blockage
span by one DbU to avoid false overlap when they are just edges connexes.
- Bug: In RoutingEvent::slackenTopology, in the local segment FSM, looping
on the MaximumSlack state. Now also checks the state count.
- Change: In TrackSegment::canMoveUp() & canPivotUp() adds the "reserve"
parameter and uses it in RoutingEvent to prevent over saturated GCells.
- Change: In Configuration, parameters adjustements: expandStep increased to
0.40. Makes RoutingSets biggers but no noticeable slow down.
- Change: In TrackSegment, _postDogLeg() & _postModify(), add segments to
"Ring" if they are directly connected to a RoutingPad. To maintain the
"border effect" after a topological slackening.
- Change: In GraphicKiteEngine, in the global routing relateds menus, suppress
the mention of "solution" as it might be unclear for an average user.
(just "Save Global Routing" or "Load Global Routing").
- Change: In RoutingEvent, conflictSolve1() tries to move up "other" blocking
segment before trying to break "self".
- Bug: In TrackSegment::reschedule(), remove from Track segments that are
now in a greater order than the current one. This bug was shown in the
TrackSegment::_postModify() method after a desalignate.
It was causing overlaps and/or routing completion false reports.
- Cleanup: In GCell, remove the DyKeyQueue support as it's been moved
to Katabatic level.
- Change: In NegociateWidow, increase the event stop thresold to 4M events
to be able to process the eFPGA matrix 16x16 (150K gates).
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput