* Change: In Hurricane, in RoutingPad::setOnBestComponent(), in case of
area equality, do not choose on id but the geometrically lowest one.
Between two runs of the global router, it is not possible to
maintain identical ids. This may leading to a change to the selected
component, and a change of the GCell it in, which cause bad
topologies when read by Katabatic.
* Change: In Hurricane, the NetRoutingProperty is moved into Hurricane
from Katabatic. Needed for Knik to be able to access thoses
informations.
* Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in
case of identical area, select the component of lowest id.
This should not be needed if the component ordering was fully
deterministic as it should be (will investigate later).
This is to ensure that the choosen component is always the
same, especially between save/load of a global routing.
* Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate
the segments only if the topology is valid (no NULL in the
cached segments).
* Bug: In Katabatic, in GCellTopology::construct(), throw an error
if the topology is bad instead of trying to continue (and core
dump later... ).
* Bug: In Kite, in BuildPowerRails, distinguish the name of the master
net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the
name of the net in the *chip* netlist. Must use the later to make
comparison as they may differs.
* Change: In Knik, in save/load solution, exclude nets that are not
globally routed by Knik. That is which NetRoutingProperty is not
*Automatic*.
* Bug: In Cumulus, in chip.BlockPower take account of the layer
width extention to sligthy shrink the connector thus avoiding a
notch with standart cell in some cases.
* Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner
trees for the leaf clocks, as it seems overconstrained for the
router. First move was to lower them in M2/M3 (instead of M3/M4)
but that was not sufficent.
* New: In Cumulus, RSavePlugin for recursively saving a physical
hierarchy.
* New: In documentation, first embryo for RDS file. Should have been
in Alliance git, but I prefer to keep newest doc in Coriolis.
* New: In CRL Core, in helpers & alliance.conf, set and read a "PAD"
variable to define the pad model name extension ("px" for "sxlib
and "pxr" for vsxlib, this is provisional).
* New: In CRL Core, in plugin.conf, add parameters to define the name
of used for power & clock supply. We may remove the extention in
the future (to be more coherent with the previous modification).
* New: In Cumulus, in chip.Configuration.GaugeConf._rpAccess(), no
longer place the accessing contact *at the center* of the
RoutingPad. It works under sxlib because buffers & registers all
have same size terminals. But this is not true under vsxlib,
leading to misaligned contacts & wires. Now systematically place
on the slice midlle track (maybe with one pitch above or below).
This is still very weak as we do not check if the terminal
reach were the contact is being put. Has to be strenthened in
the future.
* New: In Cumulus, in chip.Configuration.ChipConf, read the new
clock & power pad parameters.
* Change: In Isobar (and all other Python wrappers), uses PyLong instead
of PyInt for DbU conversions. In PyHurricane argument converter,
automatically check for both PyLong and then PyInt.
* Change: In Cumulus, in chip.PadsCorona, more accurate error message
in case of discrepency in global net connections (i.e. no net
of the same name in instance model and instance model owner.
* Change: In Kite, in BuildPowerRails, when looking up at the pads
model name to find "pck_" or "pvddeck_", do not compare the
extension part. But we still use hard-coded stem pad names,
maybe we shouldn't.
* Bug: In Katabatic, in GCellConfiguration::_do_xG_xM1_xM3(), there
was a loop in the search of the best N/E initial RoutingPad.
* Bug: In Kite, in KiteEngine::protectRoutingPads(), *do not* protect
RoutingPads of fixed nets, they are already through the
BuildPowerRails stage (and it's causing scary overlap warning
messages).
* Bug: In Cumulus, in ClockTree.HTreeNode.addLeaf(), do not create
deep-plug when the core is flat (not sub-modules). All the new
nets are at core level.
* Bug: In Cumulus, in ChipPlugin.PlaceCore.doFloorplan(), ensure
that the core is aligned on the GCell grid (i.e. the slice
grid of the overall chip).
* Bug: In Kite, in GCellTopology::_do_xG_xM1_xM3(), infinite loop
while looking for the bigger N-E RoutingPad. Forgot to decrement
the index...
* Bug: In ClockTree plugin, only the logical view of the clock buffer
was loaded, so no external components where found on the I/O nets.
The external components are loaded only when the *physical* view
is loaded. Didn't show on sxlib because the buffer was fulled
loaded *before* running the ClockTree.
* Bug: In PyHurricane, in the various LocatorNextMethod() macros,
sometimes an empty collection can be returned by Hurricane
(GenericCollection()), which has a NULL locator. So check
if the locator is *not* NULL before trying to access it...
* Change: In Chip, more accurate error messages related to the clock
detecttion.
* Change: In Hurricane, in Plug::setNet(), more informative error messages.
* Change: In Hurricane, In Segment, more informative error messages.
* Change: In Hurricane, In DeepNet, accessor for the Net occurrence.
* Bug: In Katabatic, in AutoSegment::create(), error message uses correct
variables (vertical was using horizontal)...
* Change: In Kite, in BuildPowerRails, already existing wiring in instances
is copied up as blockage. Uses blockage layer instead of true layer
(it was a bug).
* Change: In Kite, in BuildPreRouted, consider as manual global routing
nets with only default wiring (default size wire & contacts).
Non-default routing is flagged as fixed (with the NetRoutingState
property).
* Change: In bootstrap, in ccb, builder and coriolisEnv.py, correct detection
of the windows architecture (32 or 64 bits). Under Cygwin, add the
directory of the dll into the PATH also. Uses "site-package" as the
location of Python modules (*not* "dist-package").
Use gnu++0x under Cygwin instead of c++11.
* Change: In Etesian, if Coloquinte is not found, do not stop the compilation,
just disable the tool altogether.
* Change: In Hurricane, In Backtrace, disable backtrace under Cygwin as it
uses features specific of the glibc.
* Change: In Knik, use HUGE_VAL instead of HUGE (not present under Cygwin),
add the <cmath> header.
* Change: In Unicorn, Coloquinte no longer stops the compilation.
* Change: In bootstrap, in ccb & builder, build by default with Qt4 and
provide a --qt5 command line switch to enable Qt5.
FindBootstrap.cmake now provides a qtX_wrap_cpp() macros to be
independant of the version of Qt being used.
Add all thoses options to the graphical interface to the builder.
* Change: In all the tools using Qt, switch to the qtX_*() macros from
FindBootstrap.cmake.
* Change: In Hurricane, in CellViewer, revert to the Qt4 way of connecting
signal/slots for backward compatibility.
Finally get rid of the demonic code from Wu Yifei...
* New: In Isobar, added encapsulation of Interval (don't know how have
forgotten it for so long).
* Change: In Isobar, In PyLayer, new PyLink_LayerDerived() function to
create/link the C++ object to the correct derived class and not the
base one (PyLayer) which then prevent to use the specialized methods.
Must replace PyLink_Layer() througout all the code.
* Change: In Isobar, in PyPoint the "setX()" & "setY()" methods where
still capitalized.
* Change: In Isobar, in PyQuery, complete the exportation of the C++
interface. remove the code belonging to a more "boost" way of
building the Python interface (will do that in a far future).
* New: In CRL Core, In PyAllianceFramework, export isPad() method.
* Change: In Unicorn, in unicornInit.py, protect the loading of each
single plugin by a "try" / "except" clause to the failing of one
plugins do not stop the loading of the next one.
Pass the same dictionnary argument to unicornHook() as for
ScripMain(), this is more uniform this way.
* New: In Cumulus, complete replacement of the chip placement scripts
from Wu Yifei (at last!). The clock-tree integration is still to
be done.
________________________________________________________________________
* New: In all to CMakeLists.txt, disable the warning about deprecated
WIN32 under cygwin.
* New: In boostrap, in ccb.py, coriolisEnv.py and builder/Configuration.py
add recognition in uname for the values returned under Windows/Cygwin.
* New: In Documenation, in UsersGuide.rst add some informations about
Cygwin and a section for the devel branch.
* New: In Isobar, export the DebugSession mechanism.
* New: In Kite, In KiteEngine, add the ability to run a Python script
(hook) after the initialization of the KiteEngine.
* New: In Isobar::Script, scripts arguments are now passed through a
"keywords" argument (Python: **kw), that is a dictionnary.
To add *any* Python object to that dictionnary, uses the new
method Script::addKwArgument(const char* key, PyObject*).
The "cell" and "editor" variables are now passed that way.
This means that, for the editor, the old way of inserting
a symbol in the module global dictionary is no longer used
and the Python scripts must be modificateds.
* New: In Hurricane::PyCellViewer, create the Python link function
for translation from Hurricane to Python.
* New: In Unicorn, modifications for the new argument passing for
the Python scripts.
* New: In Katabatic, add the ability to decorate some (i.e. few) nets
with a state that indicate to Katabatic & Kite what to do with it.
The possible states are:
1. Fixed : all the wire are in fixed positions. The router cannot
move them and account them as obstacles.
2. ManualGlobalRoute : a user-defined topology is supplied. The
wires still have to be detailed route in "Detailed Pre-Route"
but will be skipped for the global routing and fixed for the
general Detailed route.
3. AutomaticGlobalRoute : ordinary nets, to be global routed then
detail routed.
4. Excluded : do not try to global or detail route thoses nets.
5. MixedPreRoute : mask combining Fixed and ManualGlobalRoute.
Not all nets have this property, only those that needs a special
processing.
To ease the access to the state, it is nested inside a
PrivateProperty in the net (NetRoutingProperty), with an extension
access class (NetRoutingExtension).
* New: In Kite, take account of NetRoutingState. Pointers to the
net's states are strored inside an internal map for faster access.
The property is *not* deleted when Kite is destroyed. The property
will remains until the Net itself is destroyed.
As a consequence, the lists that where passed to high level
function are removed as the information can now be accessed directly
through the net NetRoutingProperty.
* New: In Unicorn, in CgtMain, comply with the update interface.
* New: In documentation, update the User's Guide to explain the Pre-routed
step of Kite.
* Change: In Isobar, the Python interface was not exactly mirroring the
C++ one, now it is the case. The Python code should look likes almost
exactly like the C++ one, the only differences remaining being due
to the languages respective syntaxes. Note that in the case of
constructor functions, it leads to a slightly longer notation in
Python that it could have been (mimic the ".create()" static
member). Main modifications:
1. Mirror the static constructor syntax with create():
Cell( ... ) ==> Cell.create( ... )
2. Correct hierarchy for constants in Instance, Net, Pin
& Transformation. For example:
Hurricane.PlacementStatusFIXED
==> Hurricane.Instance.PlacementStatus.FIXED
Hurricane.OrientationID
==> Hurricane.Transformation.Orientation.ID
Hurricane.TypeLOGICAL ==> Hurricane.Net.Type.LOGICAL
Hurricane.DirectionIN ==> Hurricane.Net.Direction.IN
* Change: In CRL Core, correction to match the improved Python API
in the configutation helpers.
* Change: In Cumulus, correction to match the improved Python API.
* Change: In Stratus, correction to match the improved Python API.
* Change: In Documenation, update for the new Python interface
(both user's guide & examples).
* Note: We must port those changes into Chams for it to continue
to run.
* Change: In Documenation, update the Python script support part.
* New: In Hurricane, in CellViewer, create a simpler API to graft menu
and actions into the menubar. Mainly addToMenu() which take care of
the QAction creation but also locate the relevant QMenu, base on
the Qt object name. Regroup all the widget & action creation inside
the body of the constructor, this way almost all actions can be
removed from the attributes of the CellViewer.
addToMenu() is supplied in three flavors:
1. For C++ callbacks in GraphicToolEngines (with a binded
member function method).
2. For running Python scripts to be used by the plugin system.
3. To insert separator in menus (to give a more homogeneous
look).
Remove the last remnants of Stratus scripts (unificated with basic
Python scripts).
* New: In Hurricane, in PyCellViewer, export the interface to graft
Python scripts into the CellViewer menu tree.
* Change: In Etesian, in GraphicEtesianEngine, use the new API to
graft menus & callbacks into the CellViewer.
* Change: In Mauka, in GraphicMaukaEngine, use the new API to
graft menus & callbacks into the CellViewer.
* Change: In Kite, in GraphicKiteEngine, use the new API to
graft menus & callbacks into the CellViewer.
* New: In Cumulus, install Python scripts as plugins for Unicorn under
<PYTHON_SITE_PACKAGES>/cumulus/plugins/.
* New: In Unicorn, in UnicornGui, make uses of the new API for creating
menus in the CellViewer. Creates the stem menu for the P&R tools.
Add a Python initialization mechanism to read the plugins
installeds into <PYTHON_SITE_PACKAGES>/cumulus/plugins/.
* Change: In Hurricane, in Cell::flattenNets(), do not flatten a *top net*
if at least one RoutingPad is present. In that case, we assumes that
the net has already been completly flattened.
* New: In Hurricane, in Entity, add an accessor to unique id counter.
* New: In CRL Core, in PyCellGauge, add the missing methods.
* Bug: In Isobar, PyOccurrence_create(), the HTRY/HCATCH block was not
enclosing the constructor of Occurrence, which can throw exceptions.
When an exception was thown the Python interpreter just terminate
with the cryptic message:
"Fatal Python error: Py_EndInterpreter: thread still has a frame"
Reminder to myself: when such a message occurs, it means that the
interpreter did encounter a problem, but it's related to the isobar
interface.
* Bug: In Hurricane, UpdateSession::close(), when re-materializing, the
cells must be notified <CellChanged> *after* all the Gos are
re-materializeds. In fact they must also revalided according to the
deepness of their instanciation (the deepest first). Has still to
be done.
Placement management:
* Change: In <metis>, always disable the hMetis support regardless of
it being detected or not as the placer is still unable manage the
final bin contents.
Routing gauge management:
* Bug: In CRL Core, <vsclib/alliance.conf>, set the correct pitches and
size for the routing layers and the cell gauge.
* Change: In Katabatic & Kite, extract the correct extension cap for each
routing layer from the layers characteristics (cache then in
Katabatic::Configuration).
* Change: In Katabatic, <AutoSegment>, create segment with the wire width
defined in the gauge. For AutoSegment created on already existing
Segment from the global routing, adjust the width.
* Change: In Katabatic, <AutoSegment>, more accurate information about how
a segment is connected to terminal via source and/or target.
The flag SegStrongTerminal is splitted into SegSourceTerminal and
SegSourceTarget (but still used as a mask). So now we can know by
which end an AutoSegment is connected to a terminal.
* Change: In Katabatic, ::doRp_Access(), create constraint freeing segments
not only when HSmall but also when VSmall (more critical for <vsclib>).
Otherwise we may see AutoSegments with incompatible source/target
constraints.
* Change: In Kite, BuildPowerRails, do not create blockage on PinOnly
layers *but* still create power rails planes. This is a temporary
workaround for <vsclib> where the METAL1 blockages overlaps the
terminals (it was fine for Nero, but they shouldn't for Kite).
* Change: In Kite, <RoutingEvent>, if a TrackSegment is overconstrained,
directly bybass it's slackening state to DataNegociate::Slacken.
Also rename the flag "_canHandleConstraints" to "_overConstrained",
seems clearer to me.
Miscellaneous:
* Change: In CRL Core, <Utilities>, add a "pass-though" capability on the
mstream to temporarily make them print everything.
When upgrading from doxygen 1.5.x to 1.8.5 the way the documentation
is generated has underwent many changes, particularly in the headers.
* Change: In <header.html>, must include the javascripts <jquery.js>
and <dynsections.js>.
* In <CMakeLists.txt>, as the header is customized, doxygen seems not
copy some files like the javascripts and some images (open.png,
closed.png). So we copy them from doxygen installation and make
the CMakeLists.txt install them. I hope they will not change too
much in the future.
* In <doxyfile>, disable markdown support as it do not interpret
correctly the formating we already adopted (with a left margin
to put command into). Use HTML_EXTRA_STYLESHEET instead of
HTML_STYLESHEET. Enable the index (DISABLE_INDEX=NO), for the
top header. Enable dot for inheritance diagram. Set the
EXAMPLE_PATH=. to include the synthetic hierarchy.
Correct the tag inclusion (faulty path in some places).
* In <SoC.css>, create style for the new header generated by doxygen.
* In the documentation, move the synthetic hierarchy into a module.
Miscellaneous:
* Change: In <crlcore>, in display.conf use the same display threshold
for both METAL2 & METAL3.
In alliance.conf, the side of VIAs in the gauge is 2l (not 3l).
In kite.conf, separate edge densities for H/V.
* Change: In <Cell>, in flattenNets() use flag as argument, not a
boolean. Do not create rings for clock or supply nets.
* Change: In <DeepNet>, in _createRoutingPads() do not create rings
for clock or supply net (duplicated policy as in Cell::flattenNets()).
* Bug: In <ControllerWidget>, at last find the bad signal disconnect
that was causing ungraceful messages.
* Change: In <knik>, in Edge display occupancy/capacity in the string
name. Improved display progress and debugging capabilities.
Improved exception catch & breakpoint managment:
* Bug: In <PaletteWidget>, in updateExtensions() replace the calls to
deleteLayer() by delete. This cause the widget to be immediatly
erased instead of waiting for the event queue to be completly
processed. This was causing the widget to be left in a incoherent
state when stoping at a breakpoint.
* Bug: In <BreakpointWidget>, in execNoModal(), flush the main event
loop (QApplication::flush()) *before* lauching the *local* event
loop. This is to ensure all widgets are in their final state when
waiting (especially <PaletteWidget>).
* Change: In <ExceptionWidget>, new method catchAllWrapper() to
execute any std::function< void() > function/method with a "try"/
"catch" wraparound and lauch the widget in case something is catch.
* New: In <hurricane>, support for a oberver pattern, backported from
<katabatic> with an Obervable capable of being linked to any
number of Obervers.
* New: In <Cell>, made it observable to detect Cell change, currently
emit two kind of signals:
- Cell::CellAboutToChange : *before* any change.
- Cell::CellChanged : *after* the change has been completed.
* New: In <UpdateSession>, in Go::invalidate() add the Cell owning the
Go to the UPDATOR_STACK (of course the cell is added only once).
In addition, when the Cell is added, send a notification of
Cell::CellAboutToChange to all it's observers. The slave instances
are also invalidated.
Conversely in UpdateSession::_preDestroy() for each invalidated
Cell send a Cell::CellChanged notification to all observer.
The UPDATOR_STACK has been slightly amended to accept Cell which
are not Gos. Prior to this, the Cell where completly excluded from
the UpdateSession mechanism, so it's instances where never actualised
of anything referring to the Cell for that matter.
Note: we use two different mechanisms to transmit a Cell change,
observers and the slave instance map. I think at some point it
should be unificated.
* Change: In <CellViewer>, make it a Cell observer to redraw when the
cell is modificated (also update the palette).
Uses the catchAllWrapper() to protect all critical actions.
* Change: In <GraphicTool>, no longer need of cellPreModificated and
cellPostModificated signals. Now done through the Cell obersvers.
* Change: In <mauka>, <etesian> & <kite> now uses the catchAllWrapper
method for protection (need to split methods in two, to be able
to pass it as argument). No longer emit cellPreModificated and
cellPostModificated.
Support for RoutingGauge in P&R:
* Bug: In <placeandroute.py>, the connection from the internal power
ring to the connectors was not done correctly. Wrong contact layers
leading to a gap.
* Change: In <BuildPowerRails>, detection of the corona signals based
on how the "pck_px" pad is connected. No longer based on name
matching.
* Change: In <placeandroute.py>, support for 2 routing metal only
(3 metal in the technology).
* Change: In <katabatic> & <kite> support for a "top layer" limitation
on the routing gauge, this allows to use only two routing metals
(METAL2 & METAL3). Work in progress.
Cleanup:
* Cleanup: In <vlsisapd/src/bookshelf>, remove unused file Bookshelf.cpp
(may have been a parser once upon a time).
* Cleanup: In <hurricane>, in Cell::flattenNets() use flags instead of
booleans to be more readable. Allow occurrence placement checking.
* New: In <crlcore> add Python wrapper for the Ispd05 loader.
* New: In <unicorn> add option for direct loading of ISPD05 designs.
* Bug: In <hurricane/src/viewer>, RecordModel must emit
layoutAboutToBeChanged() before changing the record contents (and
layoutChanged() afterwards).
Details:
* New: In <vlsispad/utilities>, new objet Dots for displaying a kind
of progress bar.
* Change: In <vlsisapd/bookshelf>, keywords are now case-insensitive.
Added a "strict syntax" option (to be disabled for ISPD05).
* New: First working implementation of Etesian, at least for ISPD05
"bigblue1".
* Change: In <hurricane>, in Cell::flattenNets(), no longer display
a warning if an instance is unplaced, this does not make sense
when the circuit is not placed.
* New: In <crlcore>, Added translator for ISPD05 bookshelf, the
circuit is *not* placed, unlike in ISPD04 and terminal nodes
*are* true cells.
* New: In <unicorn>, added entry in import cell for ISPD05 benchmarks.
Update to Qt 5:
* Change: Now requires at least cmake 2.8.9.
* Change: CMakeLists.txt needs small changes. Qt modules must be found
one by one (Core, Gui, Widgets). Must add "set(CMAKE_AUTOMOC ON)"
in the top file and replace "qt4" prefix in macros by "qt5".
Added simpler macro "setup_qt()" in FindBootstrap.cmake.
* Change: No longer need to include <QGtkStyle> is is choosen by default
according to the current desktop environment.
* Change: In <hurricane>, In HApplication, launch ExceptionWidget when
a std::exception is catched instead of silently discarting it.
New placer Tool: Etesian
* New: <etesian> analytical placer. Encapsulate Coloquinte from
Gabriel Gouvine.
* New: in <documentation>, add stub demonstration ToolEngine <smurf>.
Needs to be commented.
Miscellaneous:
* New: in <boostrap> and <unicorn>, added support for Etesian, the new
analytic placer. The tool itself will be added in the next commit.
* Bug: in <CellWidget>, when shifting the display buffer, we no longer
can copy the buffer on itself (we should never have). Now go through
a temporary one (PlaneId::AutoCopy) which is added to the
DrawingPlanes. Affect "goLeft()" and "goUp()".
* Bug: In <CellWidget>, remove the WA_PaintOnScreen flag/attribute.
When it's on, no PaintEvent is transmitted to the CellWidget
when it's the central widget of the <CellViewer> (QMainWindow).
It's something I still don't understand from the doc of Qt.
* Change: In <AreaCommand>, use the PlaneId enumeration instead of a
anonymous numerical index.
* Change: In <HApplication>, no longer catch and silently discard
standartd exceptions but launch the ExceptionWidget...
Suppress the now deprecated constructor with "Type" argument.
* Change: In <SelectionModel>, the "reset()" method is deprecated in
Qt5, instead enclose the "clear()" by a "beginResetModel()" and
"endResetModel()" pair.
* New: In <crlcore>, add support for ISPD05 benchmarks (in Bookshelf
format). Forked from ISPD04 and not finished yet.
* Change: In <Mauka>, distinguish the Action string identifier from
<Etesian>
* New: In <unicorn>, add entry for ISPD05 loader. Add entry for
<Etesian> analytic placer.
Details:
* New: in <bootstrap>: add support for devtoolset-2 in ccb. Run the
cmake commands through 'scl', set shell environment variables
BOOST_INCLUDEDIR & BOOST_LIBRARYDIR and disable the default
system path search.
* Change: In various flex scanners add the %nounput to suppress
compiler warnings.
* Change: Little cleanup for g++ 4.8.1 as it's more strict.
* Change: In various top CMakeLists.txt, suppress extraneous '/'
after DESTDIR.
Documentation restructuration:
* Bug: in <hurricane>: bad figure for transf-R1.
* Change, in <kite>: Remove deprecated configuration variables.
* New: documentation <tool> to regroup all documentation not directly
related to one tool.
* Change, in <crlcore>, move the user's guide and the top doc index
into <documentation>.
* New, in <documenation>: added Python script demo based on AM2901.
Project hierarchy reorganisation:
* With svn, we were doing a tool by tool checkout, suppressing the
whole repository hierarchy level.
* The tools were also grouped, inside one repository, into multiple
projects (<bootstrap>, <vlsisapd>, <coriolis>).
* We do not want to split up each tool into a separate repository,
given their tight integration (except for vlsisapd).
* We choose to simplify, and consider all tools in a svn repository
one project. Due to the way Git clone repositories, the directory
containing the project is now to be seen under "src/".
CMake modifications:
* Now that the <vlsisapd> and <bootstrap> projects are merged into
coriolis, modificate the top CMakeLists.txt of each tool to uses
only Coriolis (and bootstrap hard wired).
CCB compile script modifications:
* Uses the new source tree hierarchy, with the project directory
inserted.
* Remove (comment) all parts relateds to svn managment.
* Git is sufficiently simple so that we do not want to integrate
command shortcut into the script.
SVN cleanup:
* Remove the obsolete <chamsin> tool, that has become the full fledged
<chams> project long time ago.
- New: Added an id on DBo, SharedName and SharedPath to ensure
database determinism. All the hash key now uses the id instead
of the object's pointer (see _getHashValue()).
- Change: In RoutingPad, position is now only relative to the anchor,
no more (dx,dy). Add a isPlacedOccurrence() to check if all the
occurrence in the path are fixed and thus the position meaningful.
* ./hurricane/doc/hurricane:
- Change: In Cell, added doc about PlacementStatus.
- Change: In Transformation, more detailed explanations about the
orientations. A little beautifying too...
- Change: RoutingPad doc update.
- Change: Entity doc update (for id).
- Change: In HTML header/footer uses the new SoC.css.
- New: In PyDataBase, added method for getDB (the correct name, as alias)
and getRootLibrary().
- New: In PyComponent, added support for the optional BasicLayer argument
of getBoundingBox().
- New: In PyEntity, added support for conversion to/from RoutingPad.
- New: In PyHyperNet, added support for getNetOccurrences().
- New: In PyLibrary, added support for getLibrary().
- New: In NetExternalComponents, added support for setExternal().
- New: In hurricane/doc, added documentation RoutingPad, HyperNet & Query.
- New: In isobar, added support for RoutingPad.
- Change: In PyComponent, getCenter() method moved to it's right place in
the base class.
- Change: In PyPath, added duplicated methods (ApplyOn <-> applyOn and
Invert <-> invert).
- Change: In PyHurricane, add type object for all subtype of Component, then
we can use the Python "isinstance()" function to know the true type of a
component. Useful when looping over a collection of Component.
Name clash: We have used the class name as the name of the constructor
inside the Hurricane module, at a time we where less acquainted with
Python, so the real class are named 'PyVertical' for example, while
'Hurricane' is the constructor function. Should correct this in the
future but it's a huge work as all the Python scripts must be editeds...
- Change: In PyNet, adds the "getComponents()" Collection accessor.
- New: In Occurrence, added method getCompactString() to display a more
compact version of the occurrence.
- New: PyQuery & PyQueryMask expose the Query classe. Only partially implemented,
and with the start of the template based interface disabled.
- Bug: In PyHurricane, PyTypeViaLayer was *not* reference incremented, causing
the type to be desallocated when the Python interpreter was finalizing.
This was causing <isis> to fail.
- New: Added FreeBSD/Ubuntu patches from Otacilio De Araujo
(<otaciliodearaujo@gmail.com>).
* ./hurricane:
- Change: In CellViewer, one unificated method to lauch Python
scripts whatever they are Stratus or not.
- Change: In ScriptWidget, the function lauched is now
"ScriptMain()".
- New: In PyCellViewer, add the refresh method.
- A complete sweep of cleanup to suppress allmost all compiler warnings.
* ./hurricane/doc/hurricane:
- New: Documentation cleanup and update, particularly on the new Layer
derived classes.
* ./hurricane/src/hurricane,
./hurricane/src/isobar,
./hurricane/src/viewer:
- New: Creation of new methods, more explicit on DbU. Based on a to/from
naming scheme.
- New: Python support extented to include all objects needed to configure
through python scripts.
- Change: Finally understood what's causing the _XOPEN_SOURCE redefinition.
Basically the Python.h must be included first before any other
include. The type-puned problem will remains still (that is a Python
problem, not our own).
- Change: In DisplayStyle, uses shared_ptr for DrawingStyle instead of
custom made reference count.
- New: In ExceptionWidget, mimic more closely the behavior of a QDialog.
Uses QTextEdit/QTextDocument for the trace. Static "all in one" methods,
build from various exceptions/Errors & QString. Automatic window centering
when the trace is displayed.
- Change: In RoutingPad, uses my C++ style. Normalize constructors calls.
Allow to select (trough flags) the way the "best component" is choosen.
Currently: Biggest Area or Lowest Layer or Highest Layer.
* ./hurricane/src/viewer:
- New: In DisplayStyle, darkening is now expressed as a ratio over the HSV
components of a color. Introduce a new DisplayStyle::HSVr type.
Allow a more readable darkening effect. All object modicated accordingly.
- Change: In NetlistWidget, the "Net" section now correctly dimension itself
on the widest net name. Must suppress all the size Hints in the header
& data models.
- In CellViewer, adds a shortcut for launching Stratus scipts: SHIFT+P,S
and one for pure Python scripts: SHIFT+P,P.
- In ExceptionWidget, put the trace inside a QScrollArea so all the call
stack can be viewed regardless of the window's size. It seems that
QFontMetrics has problems to compute the right text size when using
a Qt::RichText enabled widget. Adds some "manual" corrections, hope
they will be sufficiently portables.
- New: Torus object. To allow a simpler management of a chip's corona,
the toric area between the pads and the core.
- Change: In HyperNet/LeafPlugOccurrences, change the instance stop criterions
from "isLeaf()", which means "contains no instances" to "isTerminal()"
which can be programmatically changed. This has to be done for the Pads
which are non-leaf due to "padreal" but still must be considered for their
connectors.
This modification is coupled with one in the Ap parser.
- Change: In Backtrace, enable support for Apple backtrace. This is a blind
test as I can't check by myself.
* ./hurricane/src/viewer:
- Change: In CellWidget/SelectionModel/SelectionWidget, rewrite the Gos selec-
tion mechanism. Now ExtensionGo could be selecteds as they ought to be.
Also adopt a more standard way of how objetcs are selecteds.
Prefer "dataChanged()" signal over "reset()" or "layoutChanged()" as
it keeps the selection instead of resetting it.
Unselecteds entry in the window (toggled with 't') are now shown in
red for better readability.
- New: Backtrace to print the stack when an exception is thrown.
- New: In Error, support for Backtrack.
- Change: In TextTranslator, provides a default HTML translator instead of
building it every time it was needed.
- Bug: In Common, when demangling a C++ symbol fails, returns the empty
string instead of NULL.
* ./hurricane/src/viewer:
- New: In Exception, support for the Backtrack new feature.
* ./hurricane/src/isobar:
- Change: In PyHurricane, when catching a C++ exception, adds a newline to
have a more clean display.
- New: In Query, adds an accessor to get the current path.
- Bug: In NetExternalComponents, every component of an external net was
considered as an external one. Now only truly external components
are considered.
* ./hurricane/src/isobar:
- New: StratusScript, dedicated Stratus script laucher.
- Bug: In CellWidget, when drawing selecteds Gos, the loop variable was
not reset between loops resulting in incomplete display.
* ./hurricane/src/isobar:
- New: In PyHorizontal & PyVertical, adds mutator methods.
- Bug: In Mask, the "!=" operator was erroneously implemented like the
"==" operator. Making "!=" behave like "==", what a mess.
- Bug: In BasicLayer, in constructor the _blockageLayer and _connectorLayer
where *not* initialised, leading to erratic behavior when checked
against NULL.
- Change: New problem identified with the Python modules: each module seems
to be built as a complete binary, so all the static C++ initializers are
allocated in each module. In particular the C++ tree inheritance is built
for *each* module so we cannot longer uses the typeid() comparisons
across modules... It was used by boost::program_options to perform is
casts with boost::any and was starting throwing exceptions because of
bad casts. program_option was first initialized in "configuration"
first included by PyViewer then in PyCRL (see Utilities.cpp).
A first solution is to re-order the import of Python modules in
stratus1/st_model so that CRL is imported first.
The second is to not not link "configuration" with boost::program_option
as only the binary vlsisapd-conf-editor needs it.
That is a serious problem of which we must be aware and can cause further
strange behaviors.
Debug code used to diagnostic has been kept commented in the sources a
it may be needed again :-(
This behavior do not affect our singletons because they are part of
dynamic libraries that seems to be correctly shared between the various
Python modules.
- Bug: target_link_libraries() must be put back for OSX Snow Leopard
(doesn't seems to affect Leopard). As I do not have an OSX under
my hand it's untested and is likely to fail at that point.
* ./hurricane:
- Bug: In Instance, correct support for Instance::PlacementStatus::Code.
- New: NetExternalComponents python object wrapper, moves
getExternalComponents() from Hurricane module into that new object.
- New: Breakpoint python object wrapper, to allow stratus1 to stop each
times it calls the viewer.
- Change: In PyHurricane, UpdateSession is now a true object with static
methods.
- Change: In BreakpointWidget uses a local event loop mechanism that no
longer consumes 100% of a CPU while doing nothing... (copied from
Qt's sources of QDialog).
- Library linking: there must not be "target_link_library()" for libraries,
only when building binaries. Avoid clashes between static module
or class variables, and strange reinitialisation of those variables.
- Change: Boost is now always linked staticly.
* ./hurricane/src/hurricane:
- New: TextTranslator to allow translation to and from text & HTML.
- Change: In Exception, make uses of TextTranslator to correctly display
exception text when in graphic mode.
* ./hurricane/src/isobar:
- New: Script, small object to wrap around Python scripts.
- Change: In DisplayStyle, new attribute "goMatched" to tell if the style
is associated to a given Go and therefore should be displayed in the
Layer table.
- Change: In Instance & Cell, do *not* materialize unplaced instances.
This is to avoid overloading the QuadTree at point (0,0) and besides
has no senses. Uses the PlacementStatus state.
- Bug: In Viewer CMakeLists.txt, put tool include directories first.
- Change: When static linking is required, also switch Boost libraries in static
mode. Automatically done is modules using FindHURRICANE through
SET_LIB_LINK_MODE(). Note: FindBoost must be called *after* SET_LIB_LINK_MODE().
- Change: adopt a tree layout compliant with the UNIX FHS.
* includes under TOP/include/coriolis2.
* shared datas under TOP/shared/coriolis2.
* docs under TOP/share/doc/coriolis2.
* configuration under TOP/etc/coriolis2
* ./crlcore:
- Change: In Environment, comply to the new tree layout, search configuration
files under TOP/etc/coriolis2/.
* ./knik:
- Change: In flute, comply to the new tree layout, get the "POW*.dat" files
from TOP/share/coriolis2/flute-2.4.
libraries gets installed in "lib64" instead of "lib".
buildCoriolis.py sets automatically LIB_SUFFIX for cmake.
coriolis2.spec modificated to uses lib64 on 64 bits.
- Change: In the CMakeLists.txt, in all the install commands remove all
the leading "/" as they prevents the CMAKE_INSTALL_PREFIX to be took
into account. It was nevertheless working because buildCoriolis.py was
using DESTDIR which is prepended anyway.
* ./goodies:
- Change: In buildCoriolis.py, no longer uses the DESTDIR but instead
CMAKE_INSTALL_PREFIX.
- Cleanup: In Slot.h, comment out print for debug.
- New: In CellViewer, adds a renameCell() method to "rename" the currently
loaded Cell "in place". Utility function for SaveCellDialog (see below).
- Bug: In Net.h, force expansion of SlotTemplate<Net*> with the line:
const SlotTemplate<Net*> dummyNetSlot ( string("dummyNetSlot"), NULL );
I've no satisfactory explanation, but in the cyclop Inspector the
Cell's NetMap is correctly created and in the cgt Inspector, Nets
entries of the NetMap appears as "unsupported", meaning that the
SlotTemplate<> has not been generated for Net. This correct the
problem.
- Bug: In CellWidget, correct the slightly off position of Labels references.
- New: In ControllerWidget, new TabSettings tab to hold the configuration
settings of the various Coriolis tools. The TabSettings is a tab itself.
- Bug: In PaletteWidget, do not derive from QScrollArea. Instead uses it
as a child widget. This solves the refreshing problem of the Palette.
As a rule now: never derives from anything other than QWidget.
- New: GotoWidget, not having this feature finally unverved me enough for
beeing implemented. You can specify an (x,y) on which the view will
be centered and an aperture which gives the size of the view smallest
side. It's a way of specifying the zoom level (as the zoom is not
meaningful for users). An aperture of "zero" disable that feature,
that is, zoom remains unchanged. The coordinates are integer which
are implicitly expressed in the current mode used by the viewer
(Symbolic, Grid, or Physical in micro-meters).
- Change: Big rewrite of how the Symbolic/Grid/Physical modes are sets
to/from the CellWidget. Impacted widgets are CellWidget &
DisplayFilterWidget.
Main changes are that there is no more "individual" setter/getter for
modes (setSymbolic(), setGrid(), setPhysical(DbU::UnitPower)) but one
with two arguments:
setDbuMode(int mode,DbU::UnitPower)
Signals & slots of the widgets also evolves into:
dbuModeChanged(int mode,DbU::UnitPower)
changeDbuMode (int mode,DbU::UnitPower)
- New: In Reference, adds a type to differentiate between "Labels" and
"Position". Labels are strings that we wants to display, and position
are specific points with a name attached to it.
- New: In CellWidget, specific display for the two kind of references
(Label & Display).
- New: In Query, add support for Markers, although they are Go's, are stored
in a separate QuadTree directly at Cell level. In a very similar fashion
to the ExtensionGos. Sometimes should look if thoses mecanism could be
unified.
* ./hurricane/src/viewer:
- New: In CellWidget, add support for displaying References. Uses the Marker
Query. For now labels are displayed centered on the reference point,
making that point hard to see. That behavior may be changed later if
needs to be.
- Bug: In InspectorWidget, the History::push() wasn't updating the ComboBox
index. The line was strangely commented out (?).
- Change: In Cyclop, now uses the GtkStyle when not under OSX and Qt is
newer or equal to Qt 4.5.0.
- Change: In the various Qt Model Table, do the rowHeigh bug correction.
- Bug: In InspectorWidget/NetlistModel, when browsing through the records
tree, the records were generated twice at each slot change. This
was due to the History ComboBox sending a index change signal then
the InspectorWidget setting the slot *again*.
When trying to explore a Slot, but this Slot is empty (like an
empty vector, for instance) do not gut the RecordModel. Because
as we find out that the new Slot is empty we go back and restore
the previous contents. Potentially slow if we comes from a Slot
with lots of records. Now we dump the contents only if there is
something to explore.
* ./hurricane/src/hurricane:
- Bug: In Record, the slots where stored in a list container, which was
making indexed accesses very very slow. This slowdown was also
affecting the destructor of Record (this is the explanation why
the RecordWidget was slow, even when *leaving* the net IntrusiveSet).
Now implemented in term of STL vector.
- Bug: In Slot/Common, still some adjustements to make the Inspection
mechanism work with all types. Correct the "IntrusiveMap<>" not
working with the NetMap. Related to templates not using the same
constness.
- Change: In Entity/DBo/Cell, Some more adjustements on Slot/Records.
- Bug: In NetlistWidget/NetlistModel, suppress the "forceRowHeight()"
method which was terribly slowing down the table display. Instead
uses the "setDefaultSectionSize()" of the vertical header to setup
the row height (much more compact display).
- Bug: In NetlistModel, strangely, although we have a "data()" and a
"headerData()" method, the "data()" is also called for the headers
potentially erasing any previous setting done with "headerData()".
This was occuring for the fonts settings. Don't known if it is
a bug or a feature of Qt...
- Thoses changes has to be ported to the others widgets some times...
- Change: <PROJECT>_SEARCH_PATH are put back into the *first* tool of
a project.
- Bug: In HURRICANE_CHECK_MACRO(), the quiet flag was not correctly
implemented. User ARGV instead of argv (case sensitivity!).
- Change: New structure for the installation & CMake system.
* Tools are now grouped in "projects". There are three projects:
1. - IO: Standalones parsers/drivers (IO_USER_TOP, IO_TOP).
2. - Coriolis: Base & digital tools (CORIOLIS_USER_TOP, CORIOLIS_TOP).
3. - Chams: Analogic tools (CHAMS_USER_TOP, CHAMS_TOP).
Each *project* has a two "TOP" environement variables, for
example: IO_TOP and IO_USER_TOP. Thoses variables are the only
ones useds to locate the tool (CMake modules, headers & libraries).
The local path always takes precedence over the global one.
The localisation process occurs in each tool top CMakeLists.txt
where the macro SETUP_PROJECT_PATH is to be defined. There is no
way to put it in a shared includes file as it's the macro precisely
used to locates the includes... You have to call the macro once for
each project you wants to uses:
SETUP_PROJECT_PATHS(IO)
SETUP_PROJECT_PATHS(CORIOLIS)
* In FindTOOL.cmake, supress the <TOOL>_DIR_SEARCH and uses the
<PROJECT>_DIR_SEARCH instead (example: CORIOLIS_DIR_SEARCH).
* buildCoriolis.py modificated according to the new "TOP" scheme.
- Bug: In DebugSession, bad stacking/unstacking of debug levels (unapaired),
and wrong value stacked sometimes.
* All Hurricane/Coriolis tools:
- Change: Simplify the CMakeLists,
- Bug: In DbU, "micro" symbol is "u", not "m".
- Change: In DbU, uses different precisions on differents units.
* ./hurricane/src/hviewer:
- Change: In CellWidget, when drawing a Ruler, display the current Unit
mode on first & last tick.
- New: In DbU, extend the StringMode/getValueString() to support the physical
unit in addition of lambda & foundry grid. "setStringMode()" has now a
second parameter "UnitPower", only used when the mode is DbU::Physical.
* ./hurricane/src/hviewer:
- New: In CellWidget, the fitToContents now adds a margin of 5% to get border
clear of the bounding box.
- New: In CellWidget, ability to display lengths in nanometers & micrometers
in complement of symbolic and foundry grid. DisplayFilterWidget modificated
accordingly. New members:
void setPhysicalMode ( DbU::UnitPower );
bool physicalMode () const;
DbU::UnitPower getUnitPower () const;
In addition to:
bool gridMode () const;
bool symbolicMode () const;
void setGridMode ();
void setSymbolicMode ();
- Change: In CellWidget/Ruler, rulers are now unidirectionals (as in Cadence).
- New: In CellWidget, support for drawing components names. Includes correction
of badly computed coordinates in drawDisplayText.
Components names are drawed only for the top level of hierarchy and only
if the bounding box is large enought (currently hard-coded to 50x50 pixels).
- New: In Net, "Automatic" attributes to distinguish automatically generated
net names without string pattern matching. "Automatic" Net's names are not
drawn by the CellWidget to much cluttering the display. And testing a boolean
is way faster than a pattern matching on a hard-coded name.
- Change: In CellWidget, when loading a terminal Cell, draw it's internals.
- Change: In RulerCommand, allow the ruler to be on the cursor grid, not the
snap grid (usesul for the real mode where the snap grid is much bigger
than the cursor grid).
- New: In Occurrence, new method getBoundingBox(const BasicLayer*). Returns
a different value from getBoundingBox() only if the Entity is a Component.
Long awaited by the Solstice extractor.
- Change: In ExtensionSlice, keep track of the created ExtensionSlice by name
to avoid consuming a new bit each time an ExtensionGo slice is deallocated/
re-allocated (happens often in Solstice/Equinox).
- Backtrack: In SelectCommand, do not uses::boost regex as their library have
not been compiled for 32 bits support under OSX Snow Leopard ?!$#.
- Bug: In Command.h, include and uses std::string has in some rare case no one
has done it before.
Now a command is associated to one CellWidget exactly, the active flag
was shared among all CellWidget which was an error (do not show unless
we start to multithread).
- New: In SelectCommand/SelectionPopup/SelectionPopupModel now there are three
selection mode:
Mode 0: Select all Component under point.
Mode 1: Select whole nets whose at least one component is under point.
Mode 2: Same as 1, but hide all cluttering "*nymous*" nets.
Rotation through the mode is done by pressing repeadedly the 'N' key.
The various select modes are implemented through "sub" Collections.
- export MousePositionWidget.h so pharos can use it (displays the (x,y) mouse position in status bar)
ADDS
- add a getOnPhysicalGrid() in DbU
- add getPhysical and getOnPhysicalGrid functions in PyDbU and also defines useful CONSTANTS
- New: In DbU, create a "onCustomGrid(point,step,round)" method to place
a point on an arbitrary grid. That different from the real or symbolic
ones.
- Bug: In DbU, all the snap function where bugged when passed negatives
coordinates.
- New: In DbU, new conversion function, DbU::getPhysical() to translate into
physical (metric) system.
- New: In CellWidget, separate the "Snap Grid" (real or symbolic) from the
cursor position. The cursor position will now be displayed in half-lambda
(symbolic mode) or founder grid unit (real mode).
That can be changed trough the CellWidget::setCursorStep(DbU::Unit)
method.
- New: In CellViewer/ControllerWidget, the CTRL+I keys toggle the visibility
of the Controller instead of systematically showing it.
Jean-Paul Chaput
Damien Dupuis
Ramy Iskander