* Change: In Cumulus, in Configuration.py, in the horizontal & vertical
wire creation adds new flags ExpandWidth to draw wires one lambda
bigger than the minimal width (see ClockTree.py patch).
* Change: In Cumulus, In ClockTree.py, use non default width to draw
wires of the H branch of the clock tree. This is to prevent them
to be recognized as "manual global routing", which they are not
and not event topologically compatible.
* Bug: In Kite, in BuildPowerRails, change the way clocks are detected
when working on a single block (not a whole chip). Now look only
in clock which are external and do not filter out already routed
ones.
* Change: In KiteEngine, in createGlobalGraph(), systematically call
flattenNets() so nets that are added after the first flattening
in the placer are also flattened. The flattenNets() Cell method
takes care of not flattening twice a net.
* New: In Bootstrap, in ccb.py, check if cmake is installed and issue
a warning, if not.
* New: In Hurricane, added Cell::getDeepNet() to search for a deepnet
given a path and a leaf net. This method is slow and must not be
used too often. Introduced for Kite::BuildPowerRails().
* Change: In CRL Core, in cmos/alliance.conf, modify the clock name
pattern to match the sub-clock signals in the datapath operators.
* Bug: In Etesian, do not blindly reset the top cell abutment-box.
Do it only if it's empty, otherwise keep it.
* Bug: In Kite, in buildPowerRails(), in getRootNet() the management
of clock nets was incomplete. The case of unrouted clock nets
that where not connected to the top core clock net, like the
one in the datapath registers was faulty. They were partly
recognized as unrouteds and partly as blockage generating a
routing deadlock: routage impossible due to blockage generated
from itself...
* New: In Stratus1, add a buildModel() utility function to automate
the model generation and allow a call by the model name (string).
* Change: In Unicorn, in cgt.py, display the Alliance environement.
* New: In Bootstrap, in Builder & coriolisEnv.py support for RHEL7/SL7.
The sub-directory name is 'el7_64'.
In qt_setup() add QtSvg to list of Qt5 & Qt4 used libraries.
* New: In Hurricane, In Cell add a placeholder for flags. First use to
store whether the Nets have been transhierarchically flatteneds.
* New: In Hurricane, In NetRoutingState add an Unconnected flag for
more accurate diagnosis.
* New: Hurricane, in CellViewer add an entry menu for stress tests.
The script must be named "stressScript.py" in the cwd.
* Change: In CRL Core, in display.conf add a scaling parameter for the
display threhold of the layer. This way we can adapt to different
standard cells height.
* Change: In CRL Core, in ISPD05 bookshelf loader, use the pitch of the
cell gauge instead of a hard-wired 5.0.
* Change: In Cumulus, in ClockTreePlugin, add support for Etesian placer
and a new configuration parameter to choose between Mauka/Etesian.
* New: In Etesian, support for the latest Coloquinte.
Add feed insertion stage.
* Bug: In Kite, In BuildPowerRails, check that _ck is not NULL before
tring to access it's name...
* Change: In Kite, check if the Cell has it's Nets flattened before
doing it (or not).
* Bug: In Kite, in KiteEngine::BuildPreRouteds(), Pin (sub-class of
Contact) must not be considered as a component triggering the
*already routed* state.
* Bug: In Kite, in BuildPreRouteds (GlobalNetTable), when de design
is *not* a full chip, do not try to compare net with _vdde/_vsse.
* Change: In Hurricane, the NetRoutingProperty is moved into Hurricane
from Katabatic. Needed for Knik to be able to access thoses
informations.
* Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in
case of identical area, select the component of lowest id.
This should not be needed if the component ordering was fully
deterministic as it should be (will investigate later).
This is to ensure that the choosen component is always the
same, especially between save/load of a global routing.
* Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate
the segments only if the topology is valid (no NULL in the
cached segments).
* Bug: In Katabatic, in GCellTopology::construct(), throw an error
if the topology is bad instead of trying to continue (and core
dump later... ).
* Bug: In Kite, in BuildPowerRails, distinguish the name of the master
net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the
name of the net in the *chip* netlist. Must use the later to make
comparison as they may differs.
* Change: In Knik, in save/load solution, exclude nets that are not
globally routed by Knik. That is which NetRoutingProperty is not
*Automatic*.
* Bug: In Cumulus, in chip.BlockPower take account of the layer
width extention to sligthy shrink the connector thus avoiding a
notch with standart cell in some cases.
* Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner
trees for the leaf clocks, as it seems overconstrained for the
router. First move was to lower them in M2/M3 (instead of M3/M4)
but that was not sufficent.
* New: In Cumulus, RSavePlugin for recursively saving a physical
hierarchy.
* New: In documentation, first embryo for RDS file. Should have been
in Alliance git, but I prefer to keep newest doc in Coriolis.
* New: In CRL Core, in helpers & alliance.conf, set and read a "PAD"
variable to define the pad model name extension ("px" for "sxlib
and "pxr" for vsxlib, this is provisional).
* New: In CRL Core, in plugin.conf, add parameters to define the name
of used for power & clock supply. We may remove the extention in
the future (to be more coherent with the previous modification).
* New: In Cumulus, in chip.Configuration.GaugeConf._rpAccess(), no
longer place the accessing contact *at the center* of the
RoutingPad. It works under sxlib because buffers & registers all
have same size terminals. But this is not true under vsxlib,
leading to misaligned contacts & wires. Now systematically place
on the slice midlle track (maybe with one pitch above or below).
This is still very weak as we do not check if the terminal
reach were the contact is being put. Has to be strenthened in
the future.
* New: In Cumulus, in chip.Configuration.ChipConf, read the new
clock & power pad parameters.
* Change: In Isobar (and all other Python wrappers), uses PyLong instead
of PyInt for DbU conversions. In PyHurricane argument converter,
automatically check for both PyLong and then PyInt.
* Change: In Cumulus, in chip.PadsCorona, more accurate error message
in case of discrepency in global net connections (i.e. no net
of the same name in instance model and instance model owner.
* Change: In Kite, in BuildPowerRails, when looking up at the pads
model name to find "pck_" or "pvddeck_", do not compare the
extension part. But we still use hard-coded stem pad names,
maybe we shouldn't.
* Bug: In Katabatic, in GCellConfiguration::_do_xG_xM1_xM3(), there
was a loop in the search of the best N/E initial RoutingPad.
* Bug: In Kite, in KiteEngine::protectRoutingPads(), *do not* protect
RoutingPads of fixed nets, they are already through the
BuildPowerRails stage (and it's causing scary overlap warning
messages).
* Bug: In Cumulus, in ClockTree.HTreeNode.addLeaf(), do not create
deep-plug when the core is flat (not sub-modules). All the new
nets are at core level.
* Bug: In Cumulus, in ChipPlugin.PlaceCore.doFloorplan(), ensure
that the core is aligned on the GCell grid (i.e. the slice
grid of the overall chip).
* Bug: In Kite, in GCellTopology::_do_xG_xM1_xM3(), infinite loop
while looking for the bigger N-E RoutingPad. Forgot to decrement
the index...
* Change: In Hurricane, in Plug::setNet(), more informative error messages.
* Change: In Hurricane, In Segment, more informative error messages.
* Change: In Hurricane, In DeepNet, accessor for the Net occurrence.
* Bug: In Katabatic, in AutoSegment::create(), error message uses correct
variables (vertical was using horizontal)...
* Change: In Kite, in BuildPowerRails, already existing wiring in instances
is copied up as blockage. Uses blockage layer instead of true layer
(it was a bug).
* Change: In Kite, in BuildPreRouted, consider as manual global routing
nets with only default wiring (default size wire & contacts).
Non-default routing is flagged as fixed (with the NetRoutingState
property).
* New: In Katabatic, add the ability to decorate some (i.e. few) nets
with a state that indicate to Katabatic & Kite what to do with it.
The possible states are:
1. Fixed : all the wire are in fixed positions. The router cannot
move them and account them as obstacles.
2. ManualGlobalRoute : a user-defined topology is supplied. The
wires still have to be detailed route in "Detailed Pre-Route"
but will be skipped for the global routing and fixed for the
general Detailed route.
3. AutomaticGlobalRoute : ordinary nets, to be global routed then
detail routed.
4. Excluded : do not try to global or detail route thoses nets.
5. MixedPreRoute : mask combining Fixed and ManualGlobalRoute.
Not all nets have this property, only those that needs a special
processing.
To ease the access to the state, it is nested inside a
PrivateProperty in the net (NetRoutingProperty), with an extension
access class (NetRoutingExtension).
* New: In Kite, take account of NetRoutingState. Pointers to the
net's states are strored inside an internal map for faster access.
The property is *not* deleted when Kite is destroyed. The property
will remains until the Net itself is destroyed.
As a consequence, the lists that where passed to high level
function are removed as the information can now be accessed directly
through the net NetRoutingProperty.
* New: In Unicorn, in CgtMain, comply with the update interface.
* New: In documentation, update the User's Guide to explain the Pre-routed
step of Kite.
* New: In Katabatic, in <AutoContact>, this class is no longer derived
from ExtentionGo. With the simplificated AutoContacts, there is no
reason to do so, and it will save some QuadTree insertions/deletions.
New factory function AutoContact::createFrom(Contact*) which try to
build an AutoContact on top of a Hurricane::Contact. Of course that
base contact *must fit* into one of the predefined Contact
configurations (Terminal, Turn, HTee or VTee).
NOTE: This implies that the pre-routed segments & contacts *are*
correctly articulated, which is not the case when a Cell is read
from disk in "ap" format. The pre-routing feature must be used for
now without any re-read from disk. We will implement a re-articulating
pre-process in the future.
* Change: In Katabatic, in <AutoContact> derived classes, the ::updateCache()
method now display an accurate error message if a segment is connected
but has no AutoSegment conterpart (i.e. the lookup fails).
* New: In Katabatic, in <AutoSegment>, the ::computeOptimal() method is
short-circuited for pre-routed segments, the optimal axis position is
considered to be the one it is currently on (i.e. we trust the designer).
* New: In Katabatic, in <KatabaticEngine>, the ::loadGlobalRouting()
method now accept a map of excluded nets (same as Knik). This map is
the one of pre-routed nets.
* New: In Katabatic, in layer assignment, do not try to displace fixed
segments...
* New: In Katabatic, in <AutoSegment>, new flag SegUserDefined and related
methods to know if a segment comes from the global router (Knik) or
is pre-routed (supplied by the user).
* New: In Kite, In <BuildPowerRails>, support (exclusion) for pre-routed
nets.
* New: In Kite, In <GraphicKiteEngine> new menu entry for running the
router on pre-routed nets ("Detailed Pre-Route"), also integrated
in the all-on-one route command.
* New: In Kite, In KiteEngine, new method ::_initDataBase() that group
all the initialisation steps. It is a mix of calls between Knik and
Kite initializations which are intertwinneds (may have to devellop
a shared common base at a later point). It creates the Knik grid,
then the Katabatic grid, then load pre-routed wires and power rails
and protect isolated RoutingPads.
Add support for a map of pre-routed nets (to be excluded for
Knik calls).
The method "::run()" now uses function flags, firstly to know if
it is managing pre-routed wires or general purposes ones.
* New: In Kite, in <NegociateWindow>, the "::run()" methods has now two
modes. The normal one and the 'KtPreRoutedStage' that is for routing
pre-routed nets. When in pre-route stage, the wires are fixed at the
end of this step.
* New: In Kite, in <TrackElement> add decorator for AutoSegment
isUsedDefined().
* New: In Kite, in <TrackSegment>, the various ::canDogleg() methods
returns false for a pre-routed (user-defined segment).
* New: In Kite, in PyKiteEngine, added new method runNegociatePreRouted().
Jean-Paul Chaput
Gabriel Gouvine