Commit Graph

17 Commits

Author SHA1 Message Date
Jean-Paul Chaput cc899710ea Update generated documenation (change for devtoolset). 2019-03-04 14:35:16 +01:00
Jean-Paul Chaput fcd6d69a2f Analog integration part II. Analog place & route (slicing tree).
* Change: In Hurricane::CellWidget, set the minimal size to 350 pixels
    to fit my normal DPI secondary screen...
* Change: In Hurricane::Error(), reactivate the backtrace generation by
    default. Seriously slow down the program each time an Error is to
    be constructed.
* Bug: In Analog::Device::preCreate(), check for NULL Technology before
    attempting to use it.
* Change: In Hurricane/Analog, remove all '*Arguments*' classes and their
    Python interface. It was an obsoleted way of passing devices parameters
    to the Python layout generators (located in Oroshi). Now we just get
    them straight from the Device with the getParamter() method.
* Change: In CRL::System CTOR, add Python pathes for Oroshi & Karakaze.
* Change: In Oroshi/Python/WIP_*.py layout generator scripts, remove
    all uses of the "Arguments". Directly access the parameters through
    the device itself. Make the checkCoherency() with identical arguments
    as of layout().
* New: Bora tool that performs analog place & route. Based on a slicing
    tree representation. It is the thesis work of Eric Lao.
      Code beautyfication and some programming cleanup.
* New: Karakaze tool, provide the Python base class AnalogDesign used
    to build an analog design. Create/configure devices and assemble
    them in a slicing tree.
* Change: In Unicorn/cgt.py, display the stack trace in case of an
    ImportError exception as well as for other exceptions.
      Add Bora to the set for included tool engines.
2018-10-18 18:10:01 +02:00
Jean-Paul Chaput 3f73b9d033 Anlog integration part I. Atomic devices support (transistors).
* Change: In boostrap, remove support for Chams.
* New: In Hurricane::Technology, added support for DTR rules, UnitRule,
    PhysicalRule and TwoLayersPhysicalrule. Added devices descriptors and
    models descriptors (for Spice). Spice description is not used yet
    but kept anyway in case of future use.
* New: Hurricane::Analog whole library and it's Python interface. This
    provides support for transistors, capacitors and resistors. Only
    transistor support is fully implemented as of now.
* New: In CRL/python/coriolisInit.py, read configuration files for the
    Analog extension (analog.conf & devices.conf). Thoses are optionals
    and a simple warning is issued if not found.
      Added helpers/AnalogTechno.py DTR loading helper.
      Add analog configuration files for 180/scn6m_deep_09.
* New: Oroshi tool that provides actual layout drawing for transistors.
2018-10-01 16:52:17 +02:00
Jean-Paul Chaput 399a2e3c48 Merge branch 'devel_stratus' of ssh://bop-t/users/largo2/git/coriolis into devel_anabatic
Conflicts:
	documentation/CMakeLists.txt
	documentation/_templates/indexcontent.html
	documentation/index.rst
	katana/src/katana/RoutingEvent.h
	stratus1/CMakeLists.txt
2018-08-19 13:27:09 +02:00
Jean-Paul Chaput 767407736d Add a fully generated documentation in the git repository.
* Change: In all tools supplying documentation, as we use some specific
    software to create the doc, they may not be available, or worse, be
    and incompatible version. So, by default, we install the files shipped
    with the git repository. To force a full doc rebuild, use the "--doc"
    flag of ccb.py.
2018-06-06 18:42:26 +02:00
Jean-Paul Chaput 6ed8de5837 Added latest doc compilation to avoid rebuild. 2018-05-05 00:23:44 +02:00
Jean-Paul Chaput 1c2c858ce8 Added netlist & tool engines to Hurricane+Python tutorial. 2018-03-18 23:28:49 +01:00
Jean-Paul Chaput dd4a01fe70 Validating channel routing mode (two metals) on SNX.
* New: In Hurricane::Entity, add an id counter limit and a memory size
    limit. The two limits are checked only when a new Entity object is
    created. This should help avoiding massive memory links.
* New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName"
    parameter to specify the name of the ground/power signals to be
    created if they are missing in a Cell. For Alliance libraries it
    would be "vss" & "vdd" (default values), but for real technologies,
    it is often "gnd!" & "vdd!".
      The Blif parser is modificated to make use of it.
* Bug: In AnabaticEngine::unify(), set the resulting unified segment in
    the  center of the GCells common side. Gcells under a segment are
    found by using the edge that cover the segment axis. When we have
    a "bend" GCell stack and the axis is wrong, they could be ommited.
      This was causing deleted segments to be not removed from some
    Edges, then core dump.
* Change: In Anabatic::AutoSegment::create(), smarter choosing of the
    reference contact, select the fixed or terminal one instead of
    always the source one.
* New: In Anabatic::Edge::isEnding(), new function to check if a
    segment going through an Edge is starting/ending in either source
    or target GCell of the edge (active only when running in channel
    mode).
* New: In Anabatic::Edge::add(), a segment takes part in the occupancy
    only if it is not ending in either source or target (channel mode
    only). The occupancy due to terminal is pre-computed in Katana.
* New: In Anabatic::Edge::ripup(), in channel mode, never ripup a
    segment which is ending in either source or target (we *have* to
    access this edge to connect to the terminal).
* Bug: In Anabatic::GCell::hcut() and vcut(), force the update of
    the Edge which is on the side that will get splitted by the cut.
    It's capacity will be reduced to it must be updated.
* Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally
    update horizontals or verticals only. We may require only a partial
    update when resizing the GCell in only one direction.
      This, again, related to the fact that we compute the GCells under
    a segment thanks to it's axis position, so we need to be very careful
    when modificating axis.
* Change: In Katana::Block::resizeChannels(), only update GContact vertical
    position. Do not disturb X positions of segments.
* Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some
    Edges can have a zero capacity, but still be reachable if the net has
    a terminal in either source or target. Look for this case and return
    a distance of zero instead of "unreachable". This was causing the
    global routing not to complete in channel mode.
      For computing the edge distance, makes the vertical edges much more
    long (10 times) than the horizontal ones as the vertical capacity is
    very limited. Hard coded for now, should make it a parameter in the
    future.
* Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity
    of edges with reserveCapacity for each terminal inside a GCell.
    Both north and south edges are decreased as we a terminal will
    block both north and south edges.
      As a counterpart, the Edge capacity is not decreased when the
    global router connect to a terminal.
* Change: In Katana::RoutingEvent::revalidate(), when in repair stage,
    do not expand the slack for horizontal segments in channel mode.
    So they may not overlap the standard cell row.
* Bug: In Stratus documentation, do not use the french option in babel,
    the documentation is in english!
* New: In Documentation, added Hurricane/Python tutorial, part for drawing
    layout.
2018-03-16 16:20:04 +01:00
Jean-Paul Chaput 95aba574a5 Happy New Year 2018 ! Update license years... 2018-01-06 17:55:44 +01:00
Jean-Paul Chaput 3e1a7ec591 Updating the documentation of the startup procedure. 2017-12-02 15:51:21 +01:00
Jean-Paul Chaput ef63f5f93d Update documentation for new technology scheme. 2017-11-17 12:04:33 +01:00
Jean-Paul Chaput 4d6b06d368 Update documentation to build on Debian 9.2 (stretch).
* Change: In documentation/CMakeLists.txt, for add_custom_targets(),
    add_dependencies() no longer allow to give files (only others
    *target* in the sense of cmake). We must use the DEPENDS option
    of add_custom_target().
* Change: In documentation/UsersGuide, it seems that docutils no longer
    handle correctly '$' and/or '_' in verbatim in the LaTeX backend.
    (i.e. they are *not* escaped, resulting in math mode errors).
    Remove those characters as we can use others...
* Commit a snaphot of the current documentation.
2017-10-30 15:33:37 +01:00
Jean-Paul Chaput a033e3ba98 More doc unification and cleanup. 2017-07-17 19:12:18 +02:00
Jean-Paul Chaput eb73e5eca7 Force add of pdf files. 2017-07-15 17:40:37 +02:00
Jean-Paul Chaput 95d1b53646 Complete hoverhaul of the documentation to Sphinx.
* New: In documentation, reorganise all the various documents into one
    Sphinx coherent one. The index also provide a link toward the
    Doxygen generated doc (C++ APIs) and the venerable LaTeX2HTML ones
    (for Stratus).
      This will make easier all future extensions to the doc corpus.
      The generated documentation is commited into Git so a new user
    can use it directly after cloning the repository.
      The HTML doc is truly generated by Sphinx, but the pdf one is
    created rst2latex. The Sphinx pdf writer is buggy when a "tabular"
    contain a multicol and a multirow in the same area of the table.
    rst2latex handles it correctly.
      We use a theme borrowed for Read The Doc (half of it).
      It seems that some Javascripts are not working correctly,
    namely the folding of the navigation sub-menus and the index
    generation and search mode.
2017-07-15 17:35:02 +02:00
Jean-Paul Chaput 9c322501fe Version 0.2 of the RDS documentation (Symbolic & BIGVIA). 2014-09-26 22:55:55 +02:00
Jean-Paul Chaput 1f9ae36554 Bug fixes for MOSIS SCMOS_DEEP support.
* Change: In Hurricane, the NetRoutingProperty is moved into Hurricane
    from Katabatic. Needed for Knik to be able to access thoses
    informations.
* Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in
    case of identical area, select the component of lowest id.
    This should not be needed if the component ordering was fully
    deterministic as it should be (will investigate later).
      This is to ensure that the choosen component is always the
    same, especially between save/load of a global routing.
* Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate
    the segments only if the topology is valid (no NULL in the
    cached segments).
* Bug: In Katabatic, in GCellTopology::construct(), throw an error
    if the topology is bad instead of trying to continue (and core
    dump later... ).
* Bug: In Kite, in BuildPowerRails, distinguish the name of the master
    net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the
    name of the net in the *chip* netlist. Must use the later to make
    comparison as they may differs.
* Change: In Knik, in save/load solution, exclude nets that are not
    globally routed by Knik. That is which NetRoutingProperty is not
    *Automatic*.
* Bug: In Cumulus, in chip.BlockPower take account of the layer
    width extention to sligthy shrink the connector thus avoiding a
    notch with standart cell in some cases.
* Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner
    trees for the leaf clocks, as it seems overconstrained for the
    router. First move was to lower them in M2/M3 (instead of M3/M4)
    but that was not sufficent.
* New: In Cumulus, RSavePlugin for recursively saving a physical
    hierarchy.
* New: In documentation, first embryo for RDS file. Should have been
    in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 16:44:37 +02:00