Commit Graph

62 Commits

Author SHA1 Message Date
Jean-Paul Chaput bd4ace7cc8 Full update of the generated documentation. 2020-04-27 14:14:03 +02:00
Jean-Paul Chaput dfe4d80b60 Clarify semantic of flatten Collections (walkthrough).
In the Cell/Instance hierarchy, the "terminal" and "leaf cell" concepts
where not clearly defined and partially overlapping. Now, "Terminal" is
the refer to the physical hierarchy (layout) and "TerminalNetlist" to
the logical hierarchy (netlist). The logical hierarchy can be less deep
than the physical one thanks to a Cell dedicated cell flags. Collections
related to the physical hierarchy keep their old names, the one related
to the logical hierarchy are renamed from "Leaf" to "TerminalNetlist".
The name "Leaf" was too ambiguous (leaf for *what* hierarchy).

* Change: In Hurricane::Device, set the "TerminalNetlist" flag once and
    for all. No need set it in all the derived classes again.
* New: In Hurricane::MultiCapacitor, added new parameter "dummy" to
    create dummies around the capacity matrix.
* Change: In Hurricane::Cell, remove "Leaf" related methods, replace
    them by "TerminalNetlist" one, especially Collections. Now we have
    two clear sets of Collections to walkthough the layout or the
    netlist.
      Change the "Terminal" flag into "TerminalNetlist".
* Change: In Hurricane::CellCollections, rename "Leaf" into
    "TerminalNetlist" collections and apply the new semantic to the
    locators.
* Change: In Hurricane::DataBase, Leaf to TerminalInstance renaming.
* Change: In Hurricane::DeepNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::HyperNet, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Instance, Leaf to TerminalInstance renaming.
* Change: In Hurricane::Viewer::HierarchyInformations, Leaf to
    TerminalInstance renaming.
* Change: In CRL::AllianceFramework, Leaf to TerminalInstance renaming.
* Change: In CRL::Catalog, Leaf to TerminalInstance renaming.
* Change: In CRL::ApParser, Leaf to TerminalInstance renaming.
* Change: In EtesianEngine::AddFeeds, Leaf to TerminalInstance renaming.
* Bug: In EtesianEngine::resetPlacement, move there the loop over
    non terminal netlist instances to flag fully placed sub-blocks
    as terminal for the netlist. Only then remove the feed cells
    from unplaced instances. Previously, the feed cells where stripped
    even from already placed instances.
* Change: In Katana, Leaf to TerminalInstance renaming.
* Bug: In Bora::PyDSlicingNode, allow the range parameter to be the
    Python None object when we do not want to pass one but need to
    have it as positional parameter.
* Change: In Cumulus/clocktree/ClockTree.py, Leaf to TerminalInstance
    renaming.
2020-03-10 12:10:53 +01:00
Jean-Paul Chaput 0dc98dfce3 Migrating doc from Sphinx towards Pelican.
* Change: In documentation, now generate the overall documentation using
    Pelican instead of Sphinx. This allows to have an unified approach
    between the coriolis.lip6.fr website and the local documentation.
      So we keep using "only" two doc generators: doxygen & Pelican.
2020-02-03 17:44:15 +01:00
Jean-Paul Chaput 2c73cfe76c Migrating the initialisation system to be completely Python-like.
* New: In bootstrap/coriolisEnv.py, add the "etc" directory to the
    PYTHONPATH as initialization are now Python modules.
* New: In Hurricane/analogic, first groundwork for the integration of
    PIP/MIM/MOM multi-capacitors. Add C++ and Python interface for the
    allocation matrix and the list of capacities values.
* Change: In Hurricane::RegularLayer, add a layer parameter to the
    constructor so the association between the RegularLayer and it's
    BasicLayer can readily be done.
* Change: In Hurricane::Layer, add a new getCut() accessor to get the
    cut layer in ViaLayer.
* Change: In Hurricane::DataBase::get(), the Python wrapper should no
    longer consider an error if the data-base has not been created yet.
    Just return None.
* Bug: In Isobar::PyLayer::getEnclosure() wrapper, if the overall
    enclosure is requested, pass the right parameter to the C++ function.
* Change: In AllianceFramework, make public _bindLibraries() and export
    it to the Python interface.
* Change: In AllianceFramework::create(), do not longer call bindLibraries().
    This now must be done explicitely and afterwards.
* Change: In AllianceFramework::createLibrary() and
    Environement::addSYSTEM_LIBRARY(), minor bug corrections that I don't
    recall.
* Change: In SearchPath::prepend(), set the selected index to zero and
    return it.
* Change: In CRL::System CTOR, add "etc" to the PYTHONPATH as the
    configuration files are now organized as Python modules.
* New: In PyCRL, export the CRL::System singleton, it's creation is no
    longer triggered by the one of AllianceFramework.
* New: In CRL/etc/, convert most of the configuration files into the
    Python module format. For now, keep the old ".conf", but that are no
    longer used.
      For the real technologies, we cannot keep the directory name as
    "180" or "45" as it not allowed by Python syntax, so we create "node180"
    or "node45" instead.
      Most of the helpers and coriolisInit.py are no longer used now.
    To be removed in future commits after being sure that everything
    works...
* Bug: In AutoSegment::makeDogleg(AutoContact*), the layer of the contacts
    where badly computed when one end of the original segment was attached
    to a non-preferred direction segment (mostly on terminal contacts).
      Now use the new AutoContact::updateLayer() method.
* Bug: In Dijkstra::load(), limit symetric search area only if the net
    is a symmetric one !
* Change: In Katana/python/katanaInit.py, comply with the new initialisation
    scheme.
* Change: In Unicorn/cgt.py, comply to the new inititalization scheme.
* Change: In cumulus various Python scripts remove the call to
    helpers.staticInitialization() as they are not needed now (we run in
    only *one* interpreter, so we correctly share all init).
      In plugins/__init__.py, read the new NDA directory variable.
* Bug: In cumulus/plugins/Chip.doCoronafloorplan(), self.railsNb was not
    correctly managed when there was no clock.
* Change: In cumulus/plugins/Configuration.coronaContactArray(), compute
    the viaPitch from the technology instead of the hard-coded 4.0 lambdas.
      In Configuration.loadConfiguration(), read the "ioring.py" from
    the new user's settings module.
* Bug: In stratus.dpgen_ADSB2F, gives coordinates translated into DbU to
    the XY functions.
      In st_model.Save(), use the VstUseConcat flag to get correct VST files.
      In st_net.hur_net(), when a net is POWER/GROUND or CLOCK also make it
    global.
* Change: In Oroshi/python/WIP_Transistor.py, encapsulate the generator
    inside a try/except block to get prettier error (and stop at the first).
2019-10-28 18:09:14 +01:00
Jean-Paul Chaput 0df4821806 Full update of the generated documentation for version 2.3 2019-05-27 18:49:51 +02:00
Jean-Paul Chaput e704306cad More robust deterministic netmap. Use classic string hash.
* Change: In Hurricane::Cell::NetMap, the hash function is now based on
    the string itself and not on the id of the SharedName. We now may
    remove the id attribute of the SharedName.
      This to ensure a more robust deterministic behavior. The sort
    order do not depend on whether we did use names before or not.
2019-02-26 19:56:29 +01:00
Jean-Paul Chaput 2f9a7076cb Forgoten hurricane analog generated documentation. 2018-11-29 12:03:26 +01:00
Jean-Paul Chaput fcd6d69a2f Analog integration part II. Analog place & route (slicing tree).
* Change: In Hurricane::CellWidget, set the minimal size to 350 pixels
    to fit my normal DPI secondary screen...
* Change: In Hurricane::Error(), reactivate the backtrace generation by
    default. Seriously slow down the program each time an Error is to
    be constructed.
* Bug: In Analog::Device::preCreate(), check for NULL Technology before
    attempting to use it.
* Change: In Hurricane/Analog, remove all '*Arguments*' classes and their
    Python interface. It was an obsoleted way of passing devices parameters
    to the Python layout generators (located in Oroshi). Now we just get
    them straight from the Device with the getParamter() method.
* Change: In CRL::System CTOR, add Python pathes for Oroshi & Karakaze.
* Change: In Oroshi/Python/WIP_*.py layout generator scripts, remove
    all uses of the "Arguments". Directly access the parameters through
    the device itself. Make the checkCoherency() with identical arguments
    as of layout().
* New: Bora tool that performs analog place & route. Based on a slicing
    tree representation. It is the thesis work of Eric Lao.
      Code beautyfication and some programming cleanup.
* New: Karakaze tool, provide the Python base class AnalogDesign used
    to build an analog design. Create/configure devices and assemble
    them in a slicing tree.
* Change: In Unicorn/cgt.py, display the stack trace in case of an
    ImportError exception as well as for other exceptions.
      Add Bora to the set for included tool engines.
2018-10-18 18:10:01 +02:00
Jean-Paul Chaput 3f73b9d033 Anlog integration part I. Atomic devices support (transistors).
* Change: In boostrap, remove support for Chams.
* New: In Hurricane::Technology, added support for DTR rules, UnitRule,
    PhysicalRule and TwoLayersPhysicalrule. Added devices descriptors and
    models descriptors (for Spice). Spice description is not used yet
    but kept anyway in case of future use.
* New: Hurricane::Analog whole library and it's Python interface. This
    provides support for transistors, capacitors and resistors. Only
    transistor support is fully implemented as of now.
* New: In CRL/python/coriolisInit.py, read configuration files for the
    Analog extension (analog.conf & devices.conf). Thoses are optionals
    and a simple warning is issued if not found.
      Added helpers/AnalogTechno.py DTR loading helper.
      Add analog configuration files for 180/scn6m_deep_09.
* New: Oroshi tool that provides actual layout drawing for transistors.
2018-10-01 16:52:17 +02:00
Jean-Paul Chaput 399a2e3c48 Merge branch 'devel_stratus' of ssh://bop-t/users/largo2/git/coriolis into devel_anabatic
Conflicts:
	documentation/CMakeLists.txt
	documentation/_templates/indexcontent.html
	documentation/index.rst
	katana/src/katana/RoutingEvent.h
	stratus1/CMakeLists.txt
2018-08-19 13:27:09 +02:00
Jean-Paul Chaput c5034a9156 Typo in CMakeLists.txt : AND instead of "and". 2018-06-06 23:22:18 +02:00
Jean-Paul Chaput 767407736d Add a fully generated documentation in the git repository.
* Change: In all tools supplying documentation, as we use some specific
    software to create the doc, they may not be available, or worse, be
    and incompatible version. So, by default, we install the files shipped
    with the git repository. To force a full doc rebuild, use the "--doc"
    flag of ccb.py.
2018-06-06 18:42:26 +02:00
Jean-Paul Chaput 41c9959e30 Added support for diagonal wires (45° and 135°)
* New: In Hurricane::Diagonal, new object to represent 45° and 135°
    segments (X routing). Althought they have source & target, they
    are not articulated like Horizontal & Vertical, due to the
    combined displacement of X and Y (diagonal).
      Maybe we should create a common class for all the polygons
    to make "::getContour()" a method.
      Now we could represent self capacitances and high frequency
    wires.
2018-05-07 13:46:44 +02:00
Jean-Paul Chaput 0902b21f23 Added support for huge approximated polygons (for photonics).
* New: Hurricane::Triange as been renamed into Hurricane::Polygon.
    Add support for convex polygons. Polygon are approximateds by
    excess by a manhattan rectilinear polygon (with potentially
    thousands of vertexes). To reduce the memory footprint,
    compaction techniques reducing by at least a factor 4 has been
    implemented. We could go further by only storing the non-repetitive
    part of the edge (defined by the integral fraction dY/dY).
    We will see, if the program slows too much.
      The manhattan approximate is always computed but displayed
    only if the polygon grid step is greated than 4 pixels.
      The level of approximation of the polygons can be controlled
    through the "DbU::_polygonStep" parameter.
* Change: In CRL/coriolisInit.py and CRL/helpers/Technology.py, regroup
    all DbU related parameters into "technoConfig" (i.e. suppress
    "viewerConfig"). Update all the relevant technology.conf configuration
    files.
      Change the loader behavior so that "technoConfig" is read first
    and is now responsible for creating the Technology of the DataBase.
* New: In Hurricane::CellWidget, added support for displaying mahanttanized
    polygons.
* Change: In documenation/scripts/expample/polygons.py, perform (I hope)
    a comprehensive test of the polygons (check all slopes, clockwise and
    conter-clockwise).
* New: In Hurricane::DbU, added template to manage vector<> of DbU.
    Support for the "polygonStep" parameter.
2018-05-04 17:06:41 +02:00
Jean-Paul Chaput 21ec6fdbad Correct the doxygen CSS to be compliant with 1.8.13+. 2017-12-03 03:19:10 +01:00
Jean-Paul Chaput a033e3ba98 More doc unification and cleanup. 2017-07-17 19:12:18 +02:00
Jean-Paul Chaput 82cff69d9f Complete rewrite of the trace system (now a stream).
* Change: In Hurricane, in Flags add operator overload for "int" type
    and not only "unsigned int". Otherwise the compiler complaints about
    ambiguous overload when using enum values which are considered as
    "int".
      Simpler code for the BaseFlags::contains() method.
      Added implicit conversion from BaseFlags toward bool type.
* Change: In Hurricane, in Commons, complete replacement of the previous
    two trace systems (trace & ltrace) by a stream-based one.
    As it is a true object it is much less fragile than the one based
    on defines (but maybe a little slower).
      Define a reservation table for the trace levels for all the
    Coriolis & Chams components.
* Change: All tools, use the new trace system.
2016-05-17 23:00:06 +02:00
Jean-Paul Chaput 0efe75af00 Implementation of DataBase native save/restore in JSON (step 3).
* Test: post-receive hook on server should send mail [1].
* New: In VLSISAPD, in Parameter, callback have now a tag, which the
    pointer to the caller. This allow for the callback removal when
    the caller is destroyed.
* New: In VLSISAPD, in WidgetDescription, when associated to a parameter,
    the destructor must remove the associated callback function on
    the Parameter.
* New: In Hurricane, added JSON support for Configuration, separated
    from vlsisapd, as the support is not available at this point.
    JSON support for Configuration, Parameter & LayoutDescription.
* Change: In Hurricane, in JsonStack, the stack of JsonObjects has been
    displaced here from HurricaneHandler. This way, all
    JsonObject::toData() can access the JsonOjects in the context
    of the parser.
* New: In Hurricane, in DBo::toJson() added support for Entity by
    reference (ids).
* New: In Hurricane, added JSON support for all Layer sub-class types.
* New: In Hurricane, in Technology, export the Layers, but must be
   sorted by increasing mask value.
* New: In Hurricane, in Entity, added support for Entity by reference (ids).
* New: In Hurricane, in DataBase, added technology full support.
* New: In Hurricane, In JsonNet, move the ring rebuild management from
    JsonStack to JsonNet.
* New: In Hurricane, added JSON support for NetAlias, NetExternalcomponents
    (not cleanly implemented as a Relation).
* New: In Hurricane, new method Cell::fromJson() to load a cell from
    a JSON file.
* New: In Hurricane, In Graphics, make it an observable, for when JSON
    fully reload the graphic state, it must be able to notify other
    objects (namely the Controller).
* New: In Hurricane, in ControllerWidget, observe the Graphics to regenerate
    the palette as needed. New method ControllerTab::graphicsUpdated().
* New: In Hurricane, in RawDrawingStyle added a destructor to release the
    Qt pen/brush. Added JSON support for HSVr, DrawingStyle, DrawingGroup,
    & DisplayStyle.
* New: In Hurricane, in GraphicsWidget, rewrite correctly the readGraphics()
    to erase the previous widgets and re-create the new ones.
* New: In Hurricane, in PaletteWidget, correct re-creation of the layout/widgets
    in case of Graphics change.
* New: In CRL Core, in System, register the parameters callbacks with
    the address of the object, for later deletion.
* New: In CRL Core, in AllianceFramework, make it observable, to notify
    library changes. For the AllianceFramework creation, now allow to
    completly bypass the Python initialization system, when we expect
    to restore it from a full blob. Added methods to sets the default
    RoutingGauge & CellGauge.
* New: In CRL Core, added JSON suppport for CellGauge, RoutingLayerGauge
    & RoutingGauge.
* New: In CRL Core, in LibraryManager, oberver AllianceFramework, to update
    the list of libraries in case of change (for JSON full reload).
2016-02-21 11:02:50 +01:00
Jean-Paul Chaput 1b7bd9de36 Happy new year 2016! 2016-01-21 00:41:19 +01:00
Jean-Paul Chaput 5baddeb558 Implementation of DataBase native save/restore in JSON (step 2).
* New: In boostrap, in ccb.py, added support for the "support" project
    which contains external dependencies. Currently contains only
    RapidJSON. Those dependencies must be cloned here manually.
* New: In Hurricane, Initializer class for an ordered static initialization
    across different compilation modules.
* Change: In Hurricane, at DataBase level, no longer save the Cells in
    the libraries, but create and ordered list of Cell. Deepest cells
    (leaf cells) first. To avoid dependency problems.
* New: In Hurricane, JSON support for Property.
* New; In CRL, added JSON support for AllianceFramework, Environement &
    Catalog and their associated properties. Adjustment of the
    AllianceLibrary creation policy.
2016-01-21 00:25:39 +01:00
Jean-Paul Chaput ae6eeb8f56 Merged QuadTrees in overlayed Cells (placed together).
* New: In Hurricane, in Cell & Instance, add the ability to merge the
    QuadTree when *second level* instances of a Cell are placed in
    the same space as the top Cell. This is the case of a deeply
    hierarchical design made of only standard cells that are to
    be placed in a "flat" manner.
      The design is uniquified then the intermediate instances models,
    which should be unique at that point have their QuadTree merged
    through a call to Instance::slaveAbutmentBox(). That method will
    make the model of the instance use the QuadTree of the Cell to
    which the instance belong. The instance model no longer posseses
    a dedicated QuadTree. As a corollary the abutment box of both
    Cell are kept identical and the Instance has it's transformation
    set to (0,0,ID).
      Remark: when we talk about "QuadTree", we mean in fact the
    QuadTree for the instances *and* the SliceMap (Layer+QuadTree).
      Consequence in Query: when going through the resulting
    "flattened" QuadTree we will find objects with an incomplete
    Path du to the fact that we didn't have to explore their
    Instance/Cell level to reach them. The shunted part of the
    Path is stored in the Go master Cell in the _shuntedPath
    attribute. This also affect the displayed depth of hierarchy,
    but not too badly.
* New: In Hurricane, in Cell, new methods:
    - Cell::updatePlacedFlag() : set the placement flags.
    - Cell::isUnique() : one or less instance.
    - Cell::isUniquified() : is the result of an uniquification.
    - Cell::isUniquifyMaster() : is the reference cell of the
    uniquification.
* Change: In Hurricane, in Cell::Uniquify(), uniquify a Cell only
    if it is unplaced. We do not need to duplicate placed Cells
    (see datapathes).
2015-06-26 18:35:11 +02:00
Jean-Paul Chaput 4bf5cf74b4 Policy CMP0022 for CMake. Forgotten library in Unicorn link. 2015-06-11 18:01:39 +02:00
Jean-Paul Chaput 770b1fbbbc Support for Uniquification. Rewrite of the Blif parser.
* New: In Hurricane, In NetAlias & Net, add an AliasList collection to
    iterate over all the aliases names (this *not* include the main
    net name).
* New: In Hurricane, In Cell, Instance & Net add support for cloning and
    uniquification (update documentation).
      All Cells that are uniquified from a given model are kept in an
    Uniquify relation. This relation allows to get all the clones and
    generate unique clone names by adding a "_uXX" suffix.
* Bug: In Hurricane, the Cell::_isFlattenLeaf attribute was not initialized
    in the constructor.
* Change: In CRL Core, in AllianceFramework::getCell(), no longer destroy
    a partially loaded Cell in case of parser failure, let the incomplete
    Cell be.
* New: In CRL Core, in ApParser, if all the instances are placed, sets the
    Cell::Placed flag.
* Change: In CRL Core, in BlifParser, complete rewrite of the parser.
    Not so good an idea afterwards...
* New: In Etesian, uniquify the design before placing.
* Change: In Kite, display the list of unrouted wired after all other
    statistics.
2015-04-25 16:52:18 +02:00
Jean-Paul Chaput 5dc60415e7 Happy new year 2015! 2015-03-17 16:56:55 +01:00
Jean-Paul Chaput 6939025a0d Correction of SoC.css, adjust the look of the class index big letters. 2014-06-10 00:04:48 +02:00
Jean-Paul Chaput 724d92f816 Adding support for WOR_BIT in Net::Direction.
Modificate Alliance vst parser/drivers so now the wor_bit and wor_vector
are correctly loaded and written back (instead of degenrated into INOUT).
2014-05-13 17:11:48 +02:00
Jean-Paul Chaput dda3f99fd8 Update documentation for compliance with doxygen 1.8.5.
When upgrading from doxygen 1.5.x to 1.8.5 the way the documentation
is generated has underwent many changes, particularly in the headers.
* Change: In <header.html>, must include the javascripts <jquery.js>
    and <dynsections.js>.
* In <CMakeLists.txt>, as the header is customized, doxygen seems not
    copy some files like the javascripts and some images (open.png,
    closed.png). So we copy them from doxygen installation and make
    the CMakeLists.txt install them. I hope they will not change too
    much in the future.
* In <doxyfile>, disable markdown support as it do not interpret
    correctly the formating we already adopted (with a left margin
    to put command into). Use HTML_EXTRA_STYLESHEET instead of
    HTML_STYLESHEET. Enable the index (DISABLE_INDEX=NO), for the
    top header. Enable dot for inheritance diagram. Set the
    EXAMPLE_PATH=. to include the synthetic hierarchy.
    Correct the tag inclusion (faulty path in some places).
* In <SoC.css>, create style for the new header generated by doxygen.
* In the documentation, move the synthetic hierarchy into a module.
2014-05-13 16:30:41 +02:00
Jean-Paul Chaput 14a5f5f7ef Documentation restructuration
Documentation restructuration:
* Bug: in <hurricane>: bad figure for transf-R1.
* Change, in <kite>: Remove deprecated configuration variables.
* New: documentation <tool> to regroup all documentation not directly
  related to one tool.
* Change, in <crlcore>, move the user's guide and the top doc index
  into <documentation>.
* New, in <documenation>: added Python script demo based on AM2901.
2014-03-11 12:21:31 +01:00
Jean-Paul Chaput 34e0edfd61 Cleanup after SVN importation, <ccb> builder script adaptation.
Project hierarchy reorganisation:
* With svn, we were doing a tool by tool checkout, suppressing the
  whole repository hierarchy level.
* The tools were also grouped, inside one repository, into multiple
  projects (<bootstrap>, <vlsisapd>, <coriolis>).
* We do not want to split up each tool into a separate repository,
  given their tight integration (except for vlsisapd).
* We choose to simplify, and consider all tools in a svn repository
  one project. Due to the way Git clone repositories, the directory
  containing the project is now to be seen under "src/".

CMake modifications:
* Now that the <vlsisapd> and <bootstrap> projects are merged into
  coriolis, modificate the top CMakeLists.txt of each tool to uses
  only Coriolis (and bootstrap hard wired).

CCB compile script modifications:
* Uses the new source tree hierarchy, with the project directory
  inserted.
* Remove (comment) all parts relateds to svn managment.
* Git is sufficiently simple so that we do not want to integrate
  command shortcut into the script.

SVN cleanup:
* Remove the obsolete <chamsin> tool, that has become the full fledged
  <chams> project long time ago.
2014-02-26 18:24:41 +01:00
Jean-Paul Chaput 12f595941a * ./hurricane/src/hurricane:
- New: Added an id on DBo, SharedName and SharedPath to ensure
        database determinism. All the hash key now uses the id instead
        of the object's pointer (see _getHashValue()).
    - Change: In RoutingPad, position is now only relative to the anchor,
        no more (dx,dy). Add a isPlacedOccurrence() to check if all the
        occurrence in the path are fixed and thus the position meaningful.

  * ./hurricane/doc/hurricane:
    - Change: In Cell, added doc about PlacementStatus.
    - Change: In Transformation, more detailed explanations about the
        orientations. A little beautifying too...
    - Change: RoutingPad doc update.
    - Change: Entity doc update (for id).
    - Change: In HTML header/footer uses the new SoC.css.
2013-12-04 01:26:07 +00:00
Jean-Paul Chaput f8343fdfc4 * ./hurricane:
- New: In hurricane/doc, added documentation RoutingPad, HyperNet & Query.
    - New: In isobar, added support for RoutingPad.
    - Change: In PyComponent, getCenter() method moved to it's right place in
        the base class.
    - Change: In PyPath, added duplicated methods (ApplyOn <-> applyOn and
        Invert <-> invert).
2013-03-13 13:38:15 +00:00
Jean-Paul Chaput 47f3771f1d * All Tools:
- A complete sweep of cleanup to suppress allmost all compiler warnings.

  * ./hurricane/doc/hurricane:
    - New: Documentation cleanup and update, particularly on the new Layer
        derived classes.

  * ./hurricane/src/hurricane,
    ./hurricane/src/isobar,
    ./hurricane/src/viewer:
    - New: Creation of new methods, more explicit on DbU. Based on a to/from
        naming scheme.
    - New: Python support extented to include all objects needed to configure
        through python scripts.
    - Change: Finally understood what's causing the _XOPEN_SOURCE redefinition.
        Basically the Python.h must be included first before any other
        include. The type-puned problem will remains still (that is a Python
        problem, not our own).
    - Change: In DisplayStyle, uses shared_ptr for DrawingStyle instead of
        custom made reference count.
2012-11-16 12:48:38 +00:00
Jean-Paul Chaput 4db3b0b3de * All tools:
- Change: adopt a tree layout compliant with the UNIX FHS.
        * includes under      TOP/include/coriolis2.
        * shared datas under  TOP/shared/coriolis2.
        * docs under          TOP/share/doc/coriolis2.
        * configuration under TOP/etc/coriolis2

  * ./crlcore:
    - Change: In Environment, comply to the new tree layout, search configuration
        files under TOP/etc/coriolis2/.

  * ./knik:
    - Change: In flute, comply to the new tree layout, get the "POW*.dat" files
        from TOP/share/coriolis2/flute-2.4.
2010-05-18 12:53:00 +00:00
Jean-Paul Chaput f8d79dc53e * All tools:
- Change: In the CMakeLists.txt, in all the install commands remove all
        the leading "/" as they prevents the CMAKE_INSTALL_PREFIX to be took
        into account. It was nevertheless working because buildCoriolis.py was
        using DESTDIR which is prepended anyway.
  * ./goodies:
    - Change: In buildCoriolis.py, no longer uses the DESTDIR but instead
        CMAKE_INSTALL_PREFIX.
2010-05-16 16:33:58 +00:00
Jean-Paul Chaput 822fd9ae23 Rename documentation of hviewer into viewer. 2010-03-15 14:05:45 +00:00
Jean-Paul Chaput 4b8f79bc29 * ./hurricane/src/hurricane :
- Putting LGPL headers.
2009-04-17 16:36:02 +00:00
Jean-Paul Chaput f2fa2bf4c1 * ./hurricane/doc/hurricane :
- Bug: In the various Property sub-types dox file the Hurricane namespace
        wasn't closed, resulting in the deseapearance of thoses classes in the
        documentation (painful to diagnose).
          Still, the doc for the derived Property mostly remains to be written.
    - Bug: clearing some remnants of a merge conflict in DataBase.dox.
2009-04-03 14:21:04 +00:00
Christophe Alexandre 78140e5feb new doxyfile 2009-01-30 16:19:55 +00:00
Jean-Paul Chaput 88c2d138ad * ./hurricane/src/hviewer :
- Cleanup (part 2) : changing file names.
2008-11-26 10:13:31 +00:00
Jean-Paul Chaput 01ddcf4279 * ./hurricane/src/hviewer :
- New feature : first try at a more ergonomic interface. The "Controller",
        a simple Tabbed window for managing all settings.
          Reorganize the way things are selected (Nets, Area, single), aglomerated
        selection.
          Use a "logical" progression Netlist -> Selection -> Inspector.
    - In CellWiddget, new Selection managment mecanism to ensure persistent
        Selection across cell modifications.
          New signals/slots to manage Cell modification :
          a. - cellPreModificated() : must be launched *before* the Cell modification
               by the tool about to modify it.
          b. - cellPostModificated() : must be lauched *after* the Cell modification
          This mecanism may be amended to automatically fit with the UpdateSessions.  
    - Cleanup (part 1) : more consistent name for widgets, replace the 'H' prefix by
        a "Widget" suffix. Objects are modified by not filenames yet (due to svn not
        liking file renaming and modications at the same time).
    - Improved support for static building in CMakeList.txt.
2008-11-26 09:35:07 +00:00
Christophe Alexandre e370e8ac1c cmake FindHURRICANE macro now finds isobar library 2008-10-24 09:11:47 +00:00
Christophe Alexandre b0b5c18058 Orientation documentation 2008-09-26 14:07:10 +00:00
The Coriolis Project 8d41038cdc add orientation images 2008-09-26 13:15:51 +00:00
The Coriolis Project 11a7cfabff Orientation doc in progress 2008-09-26 13:15:13 +00:00
Jean-Paul Chaput 7857044814 Correct some broken links. 2008-07-25 13:29:26 +00:00
Christophe Alexandre bc3000ecb6 some fixes in the documentation 2008-07-25 12:47:08 +00:00
Jean-Paul Chaput 1a2bfba3d4 * ./hurricane/doc/hviewer :
- Embryo of documentation for the hviewer widget.
2008-07-02 15:13:40 +00:00
Jean-Paul Chaput 3c7d1b2e62 * ./hurricane/src/hviewer :
- API : in CellWidget & CellViewer constructors now only takes the
       parent QWidget.
   - Renaming coordinates translation functions for more clarity.
   - Adding a StatusBar showing mouse coordinates.
2008-07-02 13:31:50 +00:00
Jean-Paul Chaput b3fa237ea7 Small typos. 2008-06-30 14:37:52 +00:00
Christophe Alexandre f47f6b92e5 get rid of global functions :
getDataBase() -> DataBase::getDB()
2008-06-13 15:58:55 +00:00