* Update: In CRL/node600/phenitec/kite.py, update the routing gauge to
the new format. So now we can use again SxLib-2M (channel routing
SxLib for two metal technologies).
* Change: In CRL::BlifParser, if a master cell is not found in the
AllianceFramework, then try in the Blif supplied libraries.
This is used to load the zero, one and tie cells.
Add a Blif::getCell() static function to look into the Blif
supplied libraries.
* Change: In CRL::LefImport, sometimes there can be discrepencies between
the LEF ROUTING layers and the Coriolis routing gauge. Now ignore
routing layers that are *not* presents in the Coriolis gauge.
* Change: In AnabaticEngine, moved routingMode attribute from KatanaEngine,
as some setup operations needs it.
* Change: In AutoSegment::canReduce(), allow fixed segments to be reduced
if they are "jumpers" (turn+turn and top+top or bot+bot).
This case arise on the edge of routing channels for fixed wires
to connect terminals.
* Change: In AutoSegment::getTopologicalinfos(), compute differently the
(leftBound,rightBound) interval when in channel mode.
In over-the-cell mode, this interval is the one of the whole
GCells under the wire. In channel mode, for fixed wires (that is,
verticals connecteds to cells) this interval is reduced to half
the GCell height, on the connected side of said channel.
This allows Manipulator::_insertToTrack() to issue disantangling
requests (push left/push right) for fixed segments that are face
to face in the channel.
* Change: In Anabatic::Configuration CTOR, allow the cellGauge to have a
different name from the routingGauge. Now if the cell gauge that
should match the routing gauge is not found, fallback to the
name set in "anabatic.cellGauge" parameter.
Case occur when we try to match with CORE sites from LEF files.
* Change: In Etesian::Configuration CTOR, same change as in the
Anabatic configuration.
* Change: In Anabatic::GCell::updateDensity(), never set the GoStraight
flag in channel mode. This flag makes sense when there is at least
4 routing layers (so we have 2 contiguous free of blockages).
* Bug: In Anabatic::Session::_getNearestGridpoint(), sometimes the nearest on
grid point is outside the constraint box. Now force the point
to remains inside constraints even if offgrid.
* Change: In Katana::DataNegociate::update(), perpandiculars that are
either reduced or in non-preferred routing direction should not
trigger a bug message.
* Change: In KatanaEngine::_check(), do not check for fixed, horizontal
non-prefs AutoSegments in channel mode (avoid false bug display).
* Bug: In Manipulator::_forceToTrack(), slighty shrink (-1) the interval
to free. The intersection function of intervals returns true when
the two intervals *exactly* touches (1.vMax == 2.vMin). But in
this specific case, they are not *overlapping* and no action
should be taken...
* Bug: In Manipulator::_insertInTrack(), do not reject the track when
we are overlapping a fixed vertical segment in channel mode.
(Hmm, maybe already corrected by the previous one).
* Change: In Katana::NegociateOverlapCost(), in channel mode, do
not put two overlaping vertical fixed segments into infinite cost.
This happens when two cell connected verticals are face to face in
a channel. We want them negociated the track (by shrinking their
length) instead of excluding it right away.
* Change: In NegociateWindow::createTrackSegment(), in channel mode,
do not attempt to create a track segment over a fixed and reduced
AutoSegment.
Do not attempt to put a non-preferred AutoSegment on a Track
either.
* Bug: In RoutingEvent::revalidate(), the number of availables tracks
was badly computed when in the pure constraint case, when there
was only one it was reporting zero.
* Change: In TrackElements::TrackElements_Perpandicular::Locator,
do not issue a bug when an non-pref or reduced AutoSegment do not
have an associated TrackElement.
* Change: In TrackSegmentCost::update(), do not issue a bug when a
perpandicular is reduded or non-pref and do not have a TrackElement.
* New: Python/C++ API level:
* Write a new C++/template wrapper to get rid of boost::python
* The int & long Python type are now merged. So a C/C++ level,
it became "PyLong_X" (remove "PyInt_X") and at Python code
level, it became "int" (remove "long").
* Change: VLSISAPD finally defunct.
* Configuration is now integrated as a Hurricane component,
makes use of the new C++/template wrapper.
* vlsisapd is now defunct. Keep it in the source for now as
some remaining non essential code may have to be ported in
the future.
* Note: Python code (copy of the migration howto):
* New print function syntax print().
* Changed "dict.has_key(k)" for "k" in dict.
* Changed "except Exception, e" for "except Exception as e".
* The division "/" is now the floating point division, even if
both operand are integers. So 3/2 now gives 1.5 and no longer 1.
The integer division is now "//" : 1 = 3//2. So have to carefully
review the code to update. Most of the time we want to use "//".
We must never change to float for long that, in fact, represents
DbU (exposed as Python int type).
* execfile() must be replaced by exec(open("file").read()).
* iter().__next__() becomes iter(x).__next__().
* __getslice__() has been removed, integrated to __getitem__().
* The formating used for str(type(o)) has changed, so In Stratus,
have to update them ("<class 'MyClass'>" instead of "MyClass").
* the "types" module no longer supply values for default types
like str (types.StringType) or list (types.StringType).
Must use "isinstance()" where they were occuring.
* Remove the 'L' to indicate "long integer" (like "12L"), now
all Python integer are long.
* Change in bootstrap:
* Ported Coriolis builder (ccb) to Python3.
* Ported Coriolis socInstaller.py to Python3.
* Note: In PyQt4+Python3, QVariant no longer exists. Use None or
directly convert using the python syntax: bool(x), int(x), ...
By default, it is a string (str).
* Note: PyQt4 bindings & Python3 under SL7.
* In order to compile user's must upgrade to my own rebuild of
PyQt 4 & 5 bindings 4.19.21-1.el7.soc.
* Bug: In cumulus/plugins.block.htree.HTree.splitNet(), set the root
buffer of the H-Tree to the original signal (mainly: top clock).
Strangely, it was only done when working in full chip mode.
* New: Added multiple clock support in H-Tree generation in alpha/block.
* New: In CRL/etc/<NODE>/<TECH>/plugins.py, added three new parameters
for block plugin config:
"block.spareSide" : The size of the minimum side of a buffered area.
(quad-tree leaf).
"spare.buffer" : The model of the cell buffer to be used.
"spare.maxSinks" : max number of sinks on a buffer before issuing
a warning (non-blocking).
* Bug: In Etesian::BloatCell::getAb(), never apply the bloat profile to
fixed cells. In case of buffers from the spare maxtrix it was leading
Coloquinte to detect an overlap of fixed cells, which it do not
support (rightly so).
* Change: In CRL/helpers/__init__.py, to ensure a complete restart of
the database the __init__.py must be called again, but it's not the
case with reload() (see Python doc). So helpers.resetCoriolis()
must explicitly removes the Coriolis related Python modules from
sys.modules (calling "del sys.modules[moduleName]").
That list of Coriolis Python modules is built by calling
helpers.tagConfModules(), it will tag all modules added to
sys.modules since startup. It will remove (much) more than
Coriolis modules, but that should be ok.
* Change: In CRL/etc/{node*,symbolic}/TECH/__init__.py, add a call to
helpers.tagConfModules() for the techno modules to be erased on
reset.
* New: In CRL/etc/node600/phenitec, ported configuration of Phenitec 0.6um
Compliant with DataBase reset.
* New: In CRL/python/helpers, added function "unloadUserSettings()" to
unload Python modules prior to a full reset.
Added "resetCoriolis()" to perform full DataBase reset.
* Change: In CRL::AllianceFramework, make it a derived class of DBo so
the destroy() is now provided.
* Bug: In CRL::AllianceFramework::getCell(), do not attempt any load if
the library list is empty. Should never occur except in case of a
botched databse reset.
* New: In CRL::AllianceFramework, new method "saveCATAL()" to write back
the catalog of a library and "saveCells()" to write back the cells.
Note: only cells actually loaded in memory will be write back.
* New: In CRL::Catalog, add method "saveToFile()" to write back the CATAL
of a library.
* Change: In CRL::ParserDriver, replace "const string&" by "string"
(improved string support of the GNU STL).
* Change: In CRL::ParserSlot, use string instead of Name.
* Change: In CRL::ApParser, make _layerInformation an ordinary attribute
instead of a static one. This allow for it's correct resetting
across databas resets.
* Change: In CRL::VstParserGrammar, reinitialize Vst::framework at each
parser call. Needed to support database reset.
* New: In Hurricane::DBo, add an object counter to be sure that when
we perform a reset, no remaining DBo is allocated. This is different
of the object id which is ever increasing.
Note that, at reset, we check against "1" remaining element as at
this point only Database is still allocated.
Add a new "resetId()" method. MUST NEVER BE CALLED except by
DataBase::_preDestroy().
* New: In Hurricane::Database, new clear() method to remove the Cells
of all the libraries in reverse hierarchical depth order.
Make use of the new CellsSort class.
* Change: In Hurricane::DataBase::_preDestroy(), call "clear()" and
DBo::resetId().
* Change: In Hurricane::Breakpoint, change the default callback to be
a static function. So we can restore it later.
* Bug: In Hurricane::Instance::_preDestroy(), there was yet another
loop of deletion over a collection for the shared pathes.
Replace it by the repetitive deletion of the first element.
* Bug: In Hurricane::Net::_preDestroy(), RoutingPads must be destroyed
prior to any other component.
* New: In Hurricane::ColorScale, add a "qtFree()" method for freeing
the Qt Brush, Pen & Color.
* New: In Hurricane::DrawingStyle, add a "qtFree()" method for freeing
the Qt Brush, Pen & Color.
* New: In Hurricane::Graphics, add a "disable()" method to call the
various "qtFree()" of the sub-objects.
Jean-Paul Chaput