NOTE: Due to Python pathes, the NDA.common is *not* seen, even by NDA
protected configuration. They are using the non-NDA one. No harm
in that, just need to be known...
* New: Python/C++ API level:
* Write a new C++/template wrapper to get rid of boost::python
* The int & long Python type are now merged. So a C/C++ level,
it became "PyLong_X" (remove "PyInt_X") and at Python code
level, it became "int" (remove "long").
* Change: VLSISAPD finally defunct.
* Configuration is now integrated as a Hurricane component,
makes use of the new C++/template wrapper.
* vlsisapd is now defunct. Keep it in the source for now as
some remaining non essential code may have to be ported in
the future.
* Note: Python code (copy of the migration howto):
* New print function syntax print().
* Changed "dict.has_key(k)" for "k" in dict.
* Changed "except Exception, e" for "except Exception as e".
* The division "/" is now the floating point division, even if
both operand are integers. So 3/2 now gives 1.5 and no longer 1.
The integer division is now "//" : 1 = 3//2. So have to carefully
review the code to update. Most of the time we want to use "//".
We must never change to float for long that, in fact, represents
DbU (exposed as Python int type).
* execfile() must be replaced by exec(open("file").read()).
* iter().__next__() becomes iter(x).__next__().
* __getslice__() has been removed, integrated to __getitem__().
* The formating used for str(type(o)) has changed, so In Stratus,
have to update them ("<class 'MyClass'>" instead of "MyClass").
* the "types" module no longer supply values for default types
like str (types.StringType) or list (types.StringType).
Must use "isinstance()" where they were occuring.
* Remove the 'L' to indicate "long integer" (like "12L"), now
all Python integer are long.
* Change in bootstrap:
* Ported Coriolis builder (ccb) to Python3.
* Ported Coriolis socInstaller.py to Python3.
* Note: In PyQt4+Python3, QVariant no longer exists. Use None or
directly convert using the python syntax: bool(x), int(x), ...
By default, it is a string (str).
* Note: PyQt4 bindings & Python3 under SL7.
* In order to compile user's must upgrade to my own rebuild of
PyQt 4 & 5 bindings 4.19.21-1.el7.soc.
* Bug: In cumulus/plugins.block.htree.HTree.splitNet(), set the root
buffer of the H-Tree to the original signal (mainly: top clock).
Strangely, it was only done when working in full chip mode.
* Change: In Hurricane::QuadTree_GosUnder::Locator::progress(), directly
prune the elements which sizes are under the threshold. This allows
the too small Instances to be directly skipped. This was the key
point slowing the walktrough. We were systematically going through
all the instances (that is consistent with the perf traces).
* Change: In Hurricane::Cell_OccurrencesUnder, add a threshold parameter
to pass on the QuadTree (through getInstancesUnder()).
Needed for the CellWidget selection to have the same problem as
the display itself (select only what is displayed).
* New: In Hurricane::CellView, add two new parameters:
1. "viewer.minimumSize" set the original size of the window, in pixels.
(doubled for HiDPI).
2. "viewer.pixelThreshold", the size, in pixels, under which
components/instances will not be displayeds.
* New: In CRL/etc/cmos.misc.py, added parameters "viewer.minimumSize"
and "viewer.pixelsThreshold".
* Change: In CRL/etc/common/etesian.py, use double parameters
instead of percentages to simplify. For space margin and form
factor. This need the rewrite of coriolis2/settings.py in
alliance-check-toolkit.
* Change: In CRL::LefParser::_macroCbk(), create a Catalog entry for the
newly read MACRO (that is Cell) and sets the Logical, Physical,
InMemory and TerminalNetlist flags.
* Bug: In CRL::LefParser::_siteCbk(), check for NULL cell gauge.
* New: In CRL::AllianceFramework, add setCellGauge(), to set the default
cell gauge. Exported to Python.
* Change: In CRL/etc/common/technology.py, create variables for VIA
layers, so we can modify their properties afterwards.
* New: In CRL/etc/node45/freepdk45, port the configuration files to the
new Python "importable" format.
Note: in kite.py, all the gauges (Routing & Cells) must be named
"LEF.CoreSite" to please my LEF parser, so it can match the gauge
name with the SITE name for standard cells.
* Bug: In Anabatic::NetBuilderVH::_do_2G(), forgotten to be reimplemented
from the base class. Simply redirect to _do_xG().
* Change: In Katana::PowerRailsPlanes::PowerRailsplanes(), create plane
from the layers in the RoutingGauge and their associated blockages
instead of sweeping through all the basic layers.
Allow to distinguish bewteen "METAL" (symbolic) and "metal" (real).
* Change: In Hurricane::Viewer::ExceptionWidget & CRL/python/helpers/io.py,
downscale icons for non-HiDPI screen.
* Change: In CRL/etc/common/display.py, change the display threshold of
METAL1 layer so it do not appear at high scaling.
* New: In Etesian, activate the "setFixedAbHeight()" feature and export it
to Python. Allows to increase the space margin at constant height.
To be used by the P&R conductor.
* Change: In Unicorn/cgt.py, when running a script, insert the current
working directory at head of the sys.path, not at the end. So installed
modules do not shadow local one.
* New: In Anabatic::Edge, new accessor "getRawcapacity()" to know the full
capacity of the edge, that is, the real maximum number of tracks that
can go through the associated side.
* Change: In Katana/BloatProfile/Slice::tagsOverloaded(), bloating policy
change, now bloat all the instances under the GCell, not only the first
one.
* Change: In KatanaEngine::runGlobalRouter(), restore the search halo growth
policy to expanding of 3 GCells every 3 iterations.
New metrics displayed, the edge wire length length overload.
* Change: In cumulus/plugins/ConductorPlugin.py, now accepts the following
configuration parameters:
- "anabatic.globalIterationsEstimate", maximum number of global
iterations during the bloating computation passes.
- "conductor.useFixedAbHeight", tells wether the additionnal blank
space must be added so the aspect ratio is kept or the height is
kept (and the block become wider).
Disable the display of "rubber" to unclutter a little the view.
* Bug: In Technology::getPhysicalRule(), if the named layerdo not exists,
throw an exception instead of silently putting a NULL pointer inside
a rule.
* New: In Hurricane/Analog, new parameters classes for capacitor devices:
- Analog::Matrix, a matrix of null or positives integers to encode
capacitor matrix matching.
- Analog::Capacities, a list of float values for all component of a
multi-capacitor.
* New: In Hurricane::Script, add a "getFileName()" method to get the full
path name of the Python module.
* Change: In Analog::LayoutGenerator, completly remove the logger utility
as it is no longer used. Simply print error messages instead.
* Change: In Analog::MetaCapacitor, rename top & bottom plate 'T' & 'B'.
Accessors renamed in "getTopPlate()" & "getBottomPlate()".
* New: In Analog::MultiCapacitor, complete rewrite. Makes use of the
new parameters "capacities" and "matrix". Dynamically generates it's
terminals as we do not know beforehand how many capacitors could be
put in it.
* Bug: In isobar/PyHurricane.h, in Type object definition, do not prepend
a "Py" to class name (so the keep the C++ name).
* Change: In CRL/etc/scn6m_deep_09/devices.py, add entry for the new
capacitor generator.
* New: In oroshi/python/ParamsMatrix, add a "family" entry in the [0,0]
element to distinguish between transistor, capacitor and resistor.
(this is the matrix of values returned to the LayoutGenerator after
device generation).
Now have one "setGlobalParams()" function per family.
* New: In oroshi/python/Rules.py, added DTR rules needed by capacitors.
Catch exceptions if something wrong append when we extract the rules
from the technology.
* New: In Bora, the devices are no longer *only* transistors, so the
possibles configurations are no longer defined only by a number of
fingers. We must be able to support any kind of range of configuration.
So the explicit range of number of fingers is replaced by a base
class ParameterRange, and it's derived classes:
- Bora::StepParameterRange, to encode the possible number of fingers
of a transistor (the former only possibility).
- Bora::MatrixParameterRange, to encode all the possible matching
scheme for a capacitor. As there is no way to compress it, this
is a vector of Matrix (from Analog).
* Change: In Bora::DSlicingNode::_place(), the ParameterRange has to be set
on the right configuration (through the index) before being called.
The generation parameters are taken from the active item in the
ParameterRange.
* Change: In Bora::NodeSets::create(), iterate over the ParameterRange
to build all the configuration. Adjustement to the routing gauge
pitchs are moved into the DBoxSet CTOR to save a lot of code.
Semantic change: the index in the NodeSets is now the index in
the associated ParameterRange and no longer the number of fingers
of a transistor.
Check that the ParameterRange dynamic class is consitent with the
device family.
* Change: In Bora::DBoxSet, same semantic change as for NodeSets, the
number of finger become an index in ParameterRange.
In DBoxSet::create(), now also perform the abutment box adjustement
to the RoutingGauge, if possible.
* New: In Karakaze/python/AnalogDesign.py, add support for Capacitor
devices.
* New: In bootstrap/coriolisEnv.py, add the "etc" directory to the
PYTHONPATH as initialization are now Python modules.
* New: In Hurricane/analogic, first groundwork for the integration of
PIP/MIM/MOM multi-capacitors. Add C++ and Python interface for the
allocation matrix and the list of capacities values.
* Change: In Hurricane::RegularLayer, add a layer parameter to the
constructor so the association between the RegularLayer and it's
BasicLayer can readily be done.
* Change: In Hurricane::Layer, add a new getCut() accessor to get the
cut layer in ViaLayer.
* Change: In Hurricane::DataBase::get(), the Python wrapper should no
longer consider an error if the data-base has not been created yet.
Just return None.
* Bug: In Isobar::PyLayer::getEnclosure() wrapper, if the overall
enclosure is requested, pass the right parameter to the C++ function.
* Change: In AllianceFramework, make public _bindLibraries() and export
it to the Python interface.
* Change: In AllianceFramework::create(), do not longer call bindLibraries().
This now must be done explicitely and afterwards.
* Change: In AllianceFramework::createLibrary() and
Environement::addSYSTEM_LIBRARY(), minor bug corrections that I don't
recall.
* Change: In SearchPath::prepend(), set the selected index to zero and
return it.
* Change: In CRL::System CTOR, add "etc" to the PYTHONPATH as the
configuration files are now organized as Python modules.
* New: In PyCRL, export the CRL::System singleton, it's creation is no
longer triggered by the one of AllianceFramework.
* New: In CRL/etc/, convert most of the configuration files into the
Python module format. For now, keep the old ".conf", but that are no
longer used.
For the real technologies, we cannot keep the directory name as
"180" or "45" as it not allowed by Python syntax, so we create "node180"
or "node45" instead.
Most of the helpers and coriolisInit.py are no longer used now.
To be removed in future commits after being sure that everything
works...
* Bug: In AutoSegment::makeDogleg(AutoContact*), the layer of the contacts
where badly computed when one end of the original segment was attached
to a non-preferred direction segment (mostly on terminal contacts).
Now use the new AutoContact::updateLayer() method.
* Bug: In Dijkstra::load(), limit symetric search area only if the net
is a symmetric one !
* Change: In Katana/python/katanaInit.py, comply with the new initialisation
scheme.
* Change: In Unicorn/cgt.py, comply to the new inititalization scheme.
* Change: In cumulus various Python scripts remove the call to
helpers.staticInitialization() as they are not needed now (we run in
only *one* interpreter, so we correctly share all init).
In plugins/__init__.py, read the new NDA directory variable.
* Bug: In cumulus/plugins/Chip.doCoronafloorplan(), self.railsNb was not
correctly managed when there was no clock.
* Change: In cumulus/plugins/Configuration.coronaContactArray(), compute
the viaPitch from the technology instead of the hard-coded 4.0 lambdas.
In Configuration.loadConfiguration(), read the "ioring.py" from
the new user's settings module.
* Bug: In stratus.dpgen_ADSB2F, gives coordinates translated into DbU to
the XY functions.
In st_model.Save(), use the VstUseConcat flag to get correct VST files.
In st_net.hur_net(), when a net is POWER/GROUND or CLOCK also make it
global.
* Change: In Oroshi/python/WIP_Transistor.py, encapsulate the generator
inside a try/except block to get prettier error (and stop at the first).
This commit degrades the run success rate of ARMv2a to 87% (40 iters).
* New: In CRLcore/etc/.../kite.conf, add configuration parameters:
katana.termSatReservedlocal
katana.termSatthreshold
for the new edge capacity computation system.
* New: In CRLcore/etc/symbolic/phenitec06/, add support for N. Shimizu
small I/O pads (supplied in phlib80). Tune various parameters of
Anabatic/Katana to increase routing success.
* Change: In CRLcore/alliance/ap/ApParser, make Pin external components,
so RoutingPad will be build upon in global routing.
Do not complain when a I/O pad has a physical instance that did
not exists in the netlist. Just create it (appeared in phlib80).
When no netlist instance exists in a pad, the pad Cell is still
considered as terminal.
* New: In Etesian::BloatCells, new profile named "3metals" better suited
for two routing metals technologies (i.e. Phenitec).
* New: In Anabatic::RawGCellsUnder, new CTOR which take only source &
target points instead of a segment. Needed to manage wide segment for
which the axis to consider is not that of the segment (one axis for
each track it intersect).
* New: In Anabatic::GCell, add a RoutingPad count attribute, for Edge
reservation computation.
* New: In AnabaticEngine::computeEdgeCapacities(), instead of decreasing
all edges of a fixed amount (hTrackReservedLocal), guess the GCell
cluttering from the number of RoutingPads that it contains.
For non-saturated GCells, the four edges are decreased by the number
of RoutingPads. We use the maximum from the two neigboring GCells.
The hTrackReservedLocal parameter is now used only as a *maximum*
that the edge reservation can reach.
If a GCell is saturated (more than 8 RoutingPads, the saturation is
propagated horizontally to 2 neigboring GCells).
* Change: In AutoContactTerminal::getNativeConstraintBox(), use a more
flexible gauge name matching for terminal vertical extensions correction.
Namely, match all "msxlib*" kind of gauges.
* Change: In AutoSegment::setAxis(), add the ability to force the axis
position, even if it is a non-canonical segment. Maybe needed in the
initialisation steo, before the first canonisation is performed.
* New: In NetBuilder, added new methods _do_1G_1PinM1() and _do_2G_1PinM1(),
to manage coronas for Phenitec designs.
To avoid various side effects from segments being too close from
the north / east side of the routing area, make those segments fixeds.
* Change: In KatanaEngine::annotateGlobalGraph(), the management of wide
wires was wrong. The axis to use to find the underlying GCells is the
one of the track, not of the segment. This was creating bad edge
capacity computation under the power ring of a block and subsequently
routing failures.
* New: In Kanata::Manipulator, added method reprocessParallels(), not used
though, but keep it anyway, might be of use later...
* New: In Kanata::Manipulator, added method avoidBlockage() for terminal
METAL2 in non-preferred direction, restrict the terminal and turn
constraint box at the current position of the perpandicular, so it
doesn't create a deadlock in METAL2.
* Change: In SegmentFsm::conflictSolveByPlaceds(), if we cannot break
using the whole overlap, try the first atomic overlap.
* New: In SegmentFsm::_slackenStrap(), manage conflict between a non-prefered
segment and a blockage, this when to call avoidBlockage()...
* New: In Katana::Configuration, management of the new edge computation
parameters:
katana.termSatReservedlocal
katana.termSatthreshold
* New: In Cumulus/plugins/Core2Chip, support for Phenitec I/O pads.
* Change: In Hurricane::SharedName, replace the incremental Id by a hash key.
This is to ensure better deterministic properties. Between use cases,
additional strings may have to be allocated, shitfing the ids. Even if
hash can be duplicated, we should be able to ensure that the absolute
order in map table should be preserved. Supplemental strings are inserted
in a way that keep the previous order.
* Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge"
default parameter value ("sxlib").
* Change: In CRL/etc/common/technology.conf, define minimal spacing for
symbolic layers too (added for METAL4 only for now).
* Change: In CRL::Histogram, extend support to dynamically sized histograms.
Add a text pretty print with table and pseudo-curve.
* Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the
block corona corners so the global router do not draw wire under them.
This was creating deadlock for the detailed router.
When the abutment has to be computed, directly use Etesian to do it
instead of duplicating the computation in the Python plugin.
* New: In Etesian, as Coloquinte seems reluctant to evenly spread the
standard cells, we trick it by making them bigger during the placement
stage. Furthermore, we do not not uniformely increase the size of the
cells but create a "bloating profile" based on cell size, cell name
or it's density of terminals. Currently only two profiles are defined,
"disabled" which does nothing and "nsxlib" targeted on 4 metal layer
technologies (aka AMS 350nm, c35b4).
* Bug: In Knik::MatrixVertex, load the default routing gauge using the
configuration parameter "katabatic.routingGauge" as the default one
may not be the first registered one.
* New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of
the nets terminal numbers.
* Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the
contact cache when topology is invalidated. In case of multiple
invalidations, if the first did not invalidate the cache, later one
that may need it where not allowed to do so. The end result was correct
nonetheless, but it did generate annoying error messages.
* Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation
of the contact's depth when delta == 2.
* Bug: In Anabatic::Gcell::getCapacity(), was always returning the west
edge capacity, even for the westermost GCell, should be the east
edge in that case.
* New: In Anabatic::AutoSegment, introduce a new measure "distance to
terminal". This is the minimal number of segments separating the
current one from the nearest RoutingPad. This replace the previous
"strong terminal" and "weak terminal" flags.
This distance is used by Katana to sort the events, we route the
segments *from* the RoutingPads *outward*. The idea being that if we
cannot event connect to the RoutingPad, there is no points continuing
as thoses segments are the more constraineds. This gives an order close
to the simple ascending metals but with better results.
* New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable
dogleg making on those segments. mainly intended for local segments
directly connecteds to RoutingPads (distance == 0).
* New: In Anabatic::AutoSegment, more aggressive reducing of segments.
Now the only case where a segment cannot be reduced is when it is
one horizontal branch in a HTee or a vertical on a VTee. Check if,
when not accounted the source & target VIAs are still connex, if so,
allow reducing.
* New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg
mainly to prevent making doglegs twice on a turn contact. This is to
limit over-fragmentation. If one dogleg doesn't solve the problem,
making a second one will make things worse only...
* Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing
the component with the *smallest* span instead of the *bigger* one.
* New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that
no turn go be made inside those GCells. Mainly used underneath a block
corona.
* New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage
GCells with too many terminals. Slacken at least one RoutingPad access
when there is more than 8 RoutingPad in the GCell (slacken or change
a vertical METAL2 (non-preferred) into a METAL3).
* Change: In Anabatic::NetBuilderHV, allow the use of terminal connection
in non-preferred direction. That is, vertical METAL2 directly connected
to the RoutingPad (then a horizontal METAL2). This alllows for short
dogleg without clutering the METAL3 layer (critical for AMS c35b4).
Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag.
Perform some other tweaking on METAL1 access topologies, to also
minimize METAL3 use.
* New: In AnabaticEngine::computeNetConstraints(), also compute the
distance to RoutingPad for segments. Set the Unbreakable flag, based
on the distance and segment length (local, short global or long global).
New local function "propagateDistanceFromRp()".
* Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder,
is modificated so net with a degree superior to 10 are sorted first,
whatever their sparsity. This is to work in tandem with GlobalRouting.
* New: In Katana::TrackSegmentNonPref, introduce a class to manage segment
in non-preferred routing direction. Mostly intended for small METAL2
vertical directly connected to RoutingPad. Modifications to manage
this new variant all through Katana.
* Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag
of the GCell. Do not make bend inside thoses GCells.
* Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are
routed first and whitout the global routing estimation. There should be
few of them so they wont create saturations and we want them as straight
as possible. Detour are for long be-points.
Set the saerch halo to one GCell in the initial routing stage (before
ripup).
* Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints()
inside NegociateWindow::run(), as segments are inserted into tracks
only at that point so we cannot make the computation earlier.
* Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to
select whether to replace the perpandiculars *after* or *before* the
current segment.
* Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the
segment is fully enclosed inside a global, the longest overlap cost
is set to the shortest global hoverhang (before or after).
When the cost is for a global, set an infinite cost if the overlapping
segment has a RP distance less or equal to 1 (this is an access segment).
* Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of
the segments extension cap.
* New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad.
* Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints
to any turn connected to the first segment of the RoutingPad so the
perpandicular constraints got propagated to the perpandicular segment...
* Change: In RoutingEvent, cache the "distance to RP" value.
* Change: In RoutingEvent::Key::compare(), sort *first* on distance to
RoutingPad, then layer depth. If both distance to RoutingPad is null,
then sort on segment length.
* Change: In RoutingEvent::_processRepair(), try a repack perpandicular with
perpandiculars first (then with perpandicular last, then give up).
* Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint
when creating the insertion event.
* Change: In SegmentFsm::_slackenStrap(), add a step through slacken between
minimize and maximum slack (wihch directly end up in unimplemented).
* Change: In Session::_addInsertEvent(), add an axis parameter needed when
the axis of the segment is not the one of the track (case of wide
segments or non-preferred direction).
* Bug: In Track::_preDestroy(), bad management of the TrackElement reference
count. Destroy the segment only when reaching zero...
* Bug: In Track::expandFreeIneterval(), forgotten to manage case when there
is a set of overlaping segments at the "end" of the track, the
EndIsTrackMax was not set.
* Change: In TrackCost::Compare, increase the cost when an overlaping
segment is at it's ripup limit. We should try *not* to rip it up if
we can. Add a dedicated flag "AtRipupLimit".
* Change: In TrackElement, add proxies for isUnbreakable(), new function
updateTrackSpan().
* New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is
found, make the underlying GCells "GoStraight".
* New: In TrackElement::canDogleg(GCell*), check for already done perpandicular
dogleg on source/target (reject if so).
* Change: In Hurricane::CellWidget, new "isPrinter" attribute to know if
the CellWidget is used as a device for printing.
New function copyExtensionsGos() to duplicate the ExtensionGo drawing
callbacks. This is a temporary hack until the ExtensionGo are made static
to be shared by all CellWidgets.
In _redraw(), the DrawingQuery flags were not correctly reset between
different stage of the drawing. This was resulting of uneeded walkthough
of the slicing tree, along with incorrect display of some of the layers
(i.e. rubbers where diplayeds when ExtensionGos where active).
* Change: In GraphicKatanaEngine, fine tune the display of GCells for printing
CellWidget.
* Change: In Hurricane::CellPrinter, copy all the settings from the palette
of the reference (graphic) CellWidget into the printer CellWidget.
Also copy the ExtensionGos callbacks so we can print them. Use the
new CellWidget attribute "isPrinter" for the callbacks to be able
to adapt to Printer settings.
* Change: In Hurricane::Time::getStringTime(), only print two decimals
for time durations.
* Change: In boostrap, remove support for Chams.
* New: In Hurricane::Technology, added support for DTR rules, UnitRule,
PhysicalRule and TwoLayersPhysicalrule. Added devices descriptors and
models descriptors (for Spice). Spice description is not used yet
but kept anyway in case of future use.
* New: Hurricane::Analog whole library and it's Python interface. This
provides support for transistors, capacitors and resistors. Only
transistor support is fully implemented as of now.
* New: In CRL/python/coriolisInit.py, read configuration files for the
Analog extension (analog.conf & devices.conf). Thoses are optionals
and a simple warning is issued if not found.
Added helpers/AnalogTechno.py DTR loading helper.
Add analog configuration files for 180/scn6m_deep_09.
* New: Oroshi tool that provides actual layout drawing for transistors.
* Bug: In CRL/etc/NODE/VENDOR/Technology.conf, the database must be configured
as early has possible so the functions ensuring length conversions can
work correctly (l(v), u(v)). So we can no longer rely on a table to be
read after the execution of the file. We perform a direct call to the
helpers.Technology.initTechno() function. And it must be made first
thing.
In all tables taking dimensions, we must use one of the converter
function helpers.l(v), helpers.u(v) or helpers.n(v) so the the value v
get converted in lambda, microns or nanometer (resp.). Make the
modifications in all technology.conf and kite.conf files.
* Change: In CRL/coriolisInit.py, remove the technoConfig variable that has
been replaced by a direct call to helpers.Technology.initTechno().
* Change: In CRL/helpers.Alliance.loadRoutingGaugesTable(), no longer try to
convert coordinates, they must already be in DbU.
* Change: In CRL/helpers.__init__.py, remove lambdaMode() and micronsMode()
they could not be made to work as expected. Create l(), u(), n() as
replacement.
* New: Hurricane::Triange as been renamed into Hurricane::Polygon.
Add support for convex polygons. Polygon are approximateds by
excess by a manhattan rectilinear polygon (with potentially
thousands of vertexes). To reduce the memory footprint,
compaction techniques reducing by at least a factor 4 has been
implemented. We could go further by only storing the non-repetitive
part of the edge (defined by the integral fraction dY/dY).
We will see, if the program slows too much.
The manhattan approximate is always computed but displayed
only if the polygon grid step is greated than 4 pixels.
The level of approximation of the polygons can be controlled
through the "DbU::_polygonStep" parameter.
* Change: In CRL/coriolisInit.py and CRL/helpers/Technology.py, regroup
all DbU related parameters into "technoConfig" (i.e. suppress
"viewerConfig"). Update all the relevant technology.conf configuration
files.
Change the loader behavior so that "technoConfig" is read first
and is now responsible for creating the Technology of the DataBase.
* New: In Hurricane::CellWidget, added support for displaying mahanttanized
polygons.
* Change: In documenation/scripts/expample/polygons.py, perform (I hope)
a comprehensive test of the polygons (check all slopes, clockwise and
conter-clockwise).
* New: In Hurricane::DbU, added template to manage vector<> of DbU.
Support for the "polygonStep" parameter.
* Change: In CRL Core, etc/, update the configuration files of real
technologies. Mostly for FreePDK 45. This work is also done for
AMS c35b4 (350nm) but in a private (SoC) git repository.
Added a new parameter 'lefImport.minTerminalwidth' for the
minimum size (width) of a metal1 terminal in standard cells.
Corrected bug of the minimum trace level which must be
initialized to a great value and *not* zero;
* Change: In CRL Core, BlifParser, detect when there is no tie low
or tie high defined, issue an error (connexion left open) but
continue.
* New: In CRL::RoutingLayerGauge, new overlad of getTrackPosition()
with the parameter set of getTrackIndex(). Used to know if a
terminal is on-grid or not.
* New: In CRL::LefImport, smarter management of metal1 pins. Adds a
_pinPostProcess() function to select the external components
among the various shapes. If the gauge is VH, all the pin rectangles
are translateds into vertical segments (even if the metal1 gauge
says the tracks are horizontals).
The _pinPostProcess() function adds as external components of
a net, only the segments of a sufficent width as given in
'lefImport.minTerminalWidth' and that are on-grid.
* Change: In Hurricane::Technology, in all the layer connexity methods
(getLayers(), getMetalAbove(), getCutAbove(), getViaBetween(), ...)
the "useWorking" parameter is replaced by a more accurate "useSymbolic".
BEHAVIOR CHANGE: formerly, if a symbolic layer was requested, and
none was found, NULL was returned. Now, if the symbolic layer is not
found, we try to return the associated real one (same layer mask,
but not flagged as symbolic, and usually with a lowercase name).
All thoses changes have been propagated to Python bindings.
* Change: In Hurricane::BasicLayer and derived classes, rename the
"isWorking" attribute into "isSymbolic" (to match the technology
renaming).
* Change: In Hurricane::Cell::flattenNets(), ignore power, ground and
blockage nets for the flatten.
* Change: In CRL Core, in coriolisInit.py and Technology.py helpers,
rename the tables describing the technology as follow:
- symbolicLayersTable --> compositeLayersTable
- workingLayersTable --> symbolicLayersTable
- symbolicRulesTable --> layersExtensionsTable
This is to give the table names a more clearer semantic after
merging real technologies configurations (testbench AMS c35b4).
In particular, we need to define a composite layer for the
real VIAs, and not only the symbolic ones. And with correct
enclosures expressed in real dimensions (microns).
* Change: In CRL Core, in coriolis2/etc the file an directory structure
describing the technonolies is modified.
Before, one technology was split in two: the symbolic part that
may be shared across multiple real technology and the real technology
itself. To configure this we needed in ".coriolis2/techno.py" two
variables:
* symbolicTechnology.
* realTechnology.
After, we duplicate the symbolic technology in each real ones, so
to configure we only have to refer to one technology with the
variable:
* technology.
Pure sympolic technologies are still availables, associated with
a dummy real one.
We provides:
* 180/scn6m_deep_09 for MOSIS 180nm
* 45/freepdk_45 for FreePDK 45nm (work in progress).
* symbolic/cmos for classical Alliance symbolic.
* Change: In CRL Core python/helpers, SymbolicTechnology.py and
RealTechnology.py are now grouped under Technology.py.
* Change: In Hurrican::Component::_preDestroy(), the cascaded destruction
of slaves Components and subsequent ring merge and Rubber creation
was using set<> sorted on pointer values. This was making the order
of destruction of the slaves components non-deterministic. Now the
sets are sorted according to their id (see Entity).
* Change: In Hurricane::SharedProperty, the _ownerSet is now a vector<>
instead of a set<>. This will slow the search process, but hopefully
this is needed only during construction/destruction of a Property
so the slow down shouldn't be too much.
This has also an impact on Hurricane::Relation.
* Bug: In Hurricane::CellWidget, when setting up a state of a CellWidget,
the selection was not copied. Now copy the SelectorCriterion (clone).
* New: In Hurricane::SelectorCriterion, add a clone() method.
* Change: In CRL Core, in etc/common/display.conf, for the Printer.Coriolis
style, lower the thresold of display for the substrate layers so they
are shown even in small zoom mode.
* Bug: In Anabatic::singleGCell(), in some analogic design, there may be
not a single METAL1 in the GCell. Issue a clean warning instead of
going ashtray.
* Change: In CRL.etc/technology.cong & CRL.etc/display.conf, add a "metbot_r"
as a real layer when "metbot" symbolic layer is distinct from a normal
metal.
* Bug: In Anabatic::RawGCellsUnder, *again*, the north and east borders
of the whole area *are* includeds (shut up disgraceful warning).
* New: In Anabatic::GCell, add a display mode to select between boundary
display (for analogic) and density display (for numeric).
* Bug: In KatanaEngine::runGlobalRouter(), do not check if an Edge cannot
be desatured when the vector or overloaded Edges is empty.
(one less disgraceful warning)
* New: In GraphicKatanaEngine::drawGCell(), support for drawing the GCells
in density mode. Use the fire scale and the MaxDensity mode.
Setup the GCell drawing mode in GraphicKatanaEngine::initGCell().
* Change: In GraphicKatanaEngine::drawEdge(), adjust the various thresholds
for showing the Edge and its label.
* New: In CRL Core, adds "anabatic.gcell.displayMode" to the set of Anabatic
parameters.
Adjust the showing threshold for GCells in "display.conf" so when the
zoom level is low, we still can see the density map.
* Bug: In Anabatic:
- In _propagate(), on reaching a target, forgot to remove it from
the queue before pushing it back with the new distance. It also
simplificate the core algorithm as target as treated normal nodes.
* New: In Anabatic:
- Update cdebug to use the fastest macro version.
- More readable drawings of GCells and Edges.
- Added timer support.
- The distance is now computed in DbU::Unit (aka long) and not in
normalized float.
- The distance function is now a callback (std::function<>) that
can be changed (a default is provided at initialization).
- New concept of branch in the agglomerated connex component.
Each trace back part create a "branch" (tagged with a "branchId").
When a node is reached with the same distance, but from two
different branches, choose the the branch that was lastly created.
This create a slightly different tree which grows outward from
the newest branches.
- Makes the horizontal edges *slightly* longer than the vertical ones
to skew the tree to use vertical edges, as it is usually less
congested than the horiontal one (due to metal1 cell terminals).
It is also my understanding that it is useful to reduce the
number of vias, whithout introducing a via cost.
* New: In Bootstrap:
- Script sprof.py to perform sprof & demangle libraries execution
profile.
* ToDo: In Anabatic:
- Corner optimization. Sometimes when two corners are possible, the
wrong one is choosen. That is, one of it's edge cannot be used for
further grow of the tree.
* Change: In Hurricane::Observer, simplification of the template so that
we can use it directly instead of creating a derived class with an
implementation of Observer::notify(). Now the implemenation is the
same for all and just calls a notify() method on the owner object.
Create a StaticObservable for fast access of the observers. This
is mainly a fixed size table (array<>) with oberservers at known
indexes. This way we can go from the obervable to the observer
owner in one indirect access (or so I hope).
* Change: In Hurricane::CellViewer, use the new observers.
* Change: In Hurricane::ControllerWidget, use the new observers.
* Change: In Hurricane::CellWidget, set the winidow initial size to a
more sensible 500px.
* Change: In CRL::LibraryManager, use the new observers.
* Change: In CRL::LibraryManager, use the new observers.
* Change: In CRL, in display.conf & technology.conf, modification for
the ST hcmos9gp capacitors.
* Change: In Hurricane, in CellWidget, enable the drawing of ExtensionGos
according to the the threshold paramaters (as layers do).
* Change: In CRL Core, provide DrawingStyle for Anabatic::GCell &
Anabatic::Edge. Use the exact name of the ExtensionGo.
In kite.conf, add settings for the size of an edge as the optimal
size may change between analog & digital designs.
* New: In Anabatic:
- Support for fast position query using a matrix.
- Computation of the Edge capacity, based on the routing gauge parameters.
- Graphic display of the edges capacity. Added configuration
parameters to size the bounding box of an Edge.
* Bug: In Anabatic:
- GCell::_moveEdges was both too complex (some cases never arise the
way we divide GCells) and bugged.
* Change: In Hurricane, in Flags add operator overload for "int" type
and not only "unsigned int". Otherwise the compiler complaints about
ambiguous overload when using enum values which are considered as
"int".
Simpler code for the BaseFlags::contains() method.
Added implicit conversion from BaseFlags toward bool type.
* Change: In Hurricane, in Commons, complete replacement of the previous
two trace systems (trace & ltrace) by a stream-based one.
As it is a true object it is much less fragile than the one based
on defines (but maybe a little slower).
Define a reservation table for the trace levels for all the
Coriolis & Chams components.
* Change: All tools, use the new trace system.
* Bug: In Hurricane, in Cell::_preDestroy(), the classic mistake again:
do not iterate over a collection while deleting it's elements.
Now should be safe.
* Change: In CRL Core, set the default display style to "Alliance.Classic [black]"
(my favorite).
* Change: In Knik, in Vertex, add a "blocked" flag to signal disabled
vertexes in the grid (must not be used by the global router).
Modificate the Graph::getVertex() method so that when a vertex
is geometrically queried, if is a blocked one, return a non-blocked
neighbor. This mechanism is introduced to, at last, prevent the
global router to go *under* the pad in case of a commplete chip.
* New: In Katabatic, in AutoSegment, a new state has been added: "reduced".
A reduced segment is in the same layer as it's perpandiculars.
To be reduced, a segments has to be connected on source & target to
AutoContactTurn, both of the perpandiculars must be of the same layer
(below or above) and it's length must not exceed one pitch in the
perpandicular direction.
To reduce an AutoSegment, call ::reduce() and to revert the state,
call ::raise(). Two associated predicates are associated:
::canReduce() and ::mustRaise().
Note: No two adjacent segments can be reduced at the same time.
* Bug: In Katabatic, in GCellTopology, add a new method ::doRp_AccessPad()
to connect to the pads. Create wiring, fixed and non managed by
Katabatic, to connect the pad connector layer to the lowest routing
layers (depth 1 & 2). The former implementation was sometimes leading
to gaps (sheared contact) that *must not* occurs during the building
stage.
Remark: This bug did put under the light the fact that the initial
wiring must be created without gaps. Gaps are closed by making doglegs
on contacts. But this mechanism could only work when the database if
fully initialised (the cache is up to date). Otherwise various problems
arise, in the canonization process for example.
* New: In Katabatic, in AutoContactTerminal::getNativeConstraintBox(),
when anchored on a RoutingPad, now take account the potential rotation
of the Path's transformation. Here again, for the chip's pads.
* New: In Kite, support for reduced AutoSegment. TrackSegment associateds
to reduced AutoSegment are *not* inserted into track to become
effectively invisibles. When a segment becomes reduced, a TrackEvent
is generated to remove it. Conversely when it is raised a RoutingEvent
is created/rescheduled to insert it. All this is mostly managed inside
the Session::revalidate() method.
* New: In Kite, in KiteEngine::createGlobalGraph(), in case of a chip,
mark all global routing vertexes (Knik) that are under a pad, as blockeds.
* Bug: In Cumulus, in PadsCorona.Side.getAxis(), inversion between X and
Y coordinate of the chip size. Did not show until a non-square chip
was routed (i.e. our MIPS R3000).
* Change: In Stratus1, in st_placement.py add the ClockBuffer class for
backward compatibility with the MIPS32 bench. Have to review this
functionnality coming from the deprecated placeAndroute.py.
In st_instance.py, no longer creates the Plug ring of a Net.
In my opinion it just clutter the display until the P&R is called.
Can re-enable later as an option (in Unicorn).
* Change: In Unicorn, in cgt.py, more reliable way of loading then running
user supplied scripts. Borrowed from alliance-checker-toolkit doChip.py .
* Change: In CRL Core, simplify the loading sequence. The technology,
both symbolic and real is now loaded directly from coriolisInit.py
and not through the Alliance loader. This was a leftover from the
time configuration was in XML. Remove others traces of XML loading.
Remove SYMB_TECHNO_NAME, REAL_TECHNO_NAME & DISPLAY from the Alliance
environement, as they was no longer used.
Note that technology *still* need to be loader *after* Alliance
framework has been initialized.
Gauge information is moved from <alliance.conf> to <kite.conf>.
* Bug: In Coloquinte, in optimization_subproblems.cxx static variables
must not be inlined. Generate a problem when linking in debug mode
(seems the symbol gets optimised out).
* Bug: In Katabatic, in Grid::getGCell(), when the coordinate is *outside*
the area, do not try to find a GCell, directly return NULL.
* New: In Unicorn, create a generic command launcher named "coriolis" which
automatically take cares of all environement setup, then run a command
by default, it's <cgt>, but it can be anything. For example: <zsh>.
* New: In VLSISAPD, in Configuration, add a new priority level UserFile
to distinguish between the system configuration files and the user's
configuration files (which take precedence).
* New: In Hurricane, in Script (Python), improve the API to be able
to support Chams (and remove the duplicate capability from it).
Add separate functions to perform the initialize/run(s)/finalize
cycle step by step.
* Change: In CRL Core, rename real technology <hcmos9> to <hcmos9gp>,
it's offcial name from CMP/ST. This is the 130nm.
Move the reading of the symbolic & real technologies names from
coriolisInit.py to helpers.__init__.py, to be shared with
chamsInit.py.
To avoid a clash of names inside of helpers, the two variables
of techno.py are renamed "symbolicTechnology" and "realTechnology".
Move python init system from crlcore/src/crlcore to crlcore/python.
* New: In CRL Core, In Utilities, add site-packages/pharos to the
PYTHONPATH.
* Change: In Kite, move python init system from kite/src/init to
kite/python.
* Change: In Bootstrap & ccb, the coloquinte project is renamed into
"importeds", it will be the home of all the externally
devellopped softwares that are needed to build Coriolis.
Add explicit support for Fedora ("Linux.fc") and uses
site-packages, as everybody else.
* New: In CRL Core, in etc/, adds the configuration files for Etesian.
* New: In Etesian, activate the Configuration object. Now uses it's
own configuration variables instead of borrowing those of
Nimbus & Mauka.
* Change: In Documentation, updated User's Guide to present Etesian
as the placer, instead of Mauka.
* Change: In Cumulus, slight change in ClokTreePlugin and ChipPlugin
to match the new Etesian/Python interface.
* Bug: In Bootstrap, in coriolisEnv.py, check if devtoolset-2 is already
active before launching it as a sub-shell.
* Bug: In Isobar, In PyHurricane.h, DBoDestroyAttribute() set the proxy
pointer toward the C++ object to NULL. So when the Python object is
deleted no double-deletion occurs on the C++ object.
Add some more trace information in Python link/dealloc.
* Change: In CRL Core, in cyclop, make CMakeLists.txt automatically
choose the right rule for linking the binary wether we use Qt 4 or
Qt 5. Very irksome problem.
* New: In EtesianEngine::addFeed(), do not take into account instances
that are not placed entirely inside the top cell abutment box (was
causing a core dump).
* Bug: In Katabatic, in GCellQueue, correct a mismatch between a GCell
set and the iterators used upon it.
* Bug: In Mauka, in Row & Surface correct a mismatch between a container
and it's iterator.
* New: In Etesian, updated to work with the latest Coloquinte, patch
contributed by G. Gouvine.
Added EtesianEngine::setDefaultAb() to compute an abutment box if
the Cell is completly unplaced.
* New: In cumulus, in ClockTree, now the placer can be configured to be
either Mauka (slow simulated annealing) or Etesian (fast analytic).
New setting 'clockTree.placerEngine' in plugin settings.
* New: In Bootstrap, in Builder & coriolisEnv.py support for RHEL7/SL7.
The sub-directory name is 'el7_64'.
In qt_setup() add QtSvg to list of Qt5 & Qt4 used libraries.
* New: In Hurricane, In Cell add a placeholder for flags. First use to
store whether the Nets have been transhierarchically flatteneds.
* New: In Hurricane, In NetRoutingState add an Unconnected flag for
more accurate diagnosis.
* New: Hurricane, in CellViewer add an entry menu for stress tests.
The script must be named "stressScript.py" in the cwd.
* Change: In CRL Core, in display.conf add a scaling parameter for the
display threhold of the layer. This way we can adapt to different
standard cells height.
* Change: In CRL Core, in ISPD05 bookshelf loader, use the pitch of the
cell gauge instead of a hard-wired 5.0.
* Change: In Cumulus, in ClockTreePlugin, add support for Etesian placer
and a new configuration parameter to choose between Mauka/Etesian.
* New: In Etesian, support for the latest Coloquinte.
Add feed insertion stage.
* Bug: In Kite, In BuildPowerRails, check that _ck is not NULL before
tring to access it's name...
* Change: In Kite, check if the Cell has it's Nets flattened before
doing it (or not).
* New: In ClockTree plugin, select the name of the buffer cell through
configuration (parameter: "clockTree.buffer"), and guess the I/O
name of this buffer automatically.
Put configuration parameters in plugin.conf and not mauka.conf.
Bug: strangely triggers a coredump in components collection
when used with <vsxlib>. Some debug printing still active until
that is solved.
* New: In Chip plugin, make the size and numbers of the block rails
configuration parameters (in plugin.conf).
* Change: In Kite, Katabatic & Knik, express the number of tracks truly
available to the global router by the number of tracks reserved to
the local routage inside a GCell. Replace the ratio parameter
"hEdgeCapacity" by an integer parameter "hTracksReservedLocal"
(duplicate for verticals).
It is more explicit to give directly the number of tracks that
are to be used locally, and potentially saves us from rouding
problems when calculating the number of availables tracks.
Note: we cannot do that for the layer saturateRatio as it
uses the density ratio that take account local wires, leading
to fractional results.
* Change: In Katabatic, in <GCellGrid>, rename checkEdgeSaturation()
into checkEdgeOverflow(), more explicit.
* Change: In Knik, in <Graph>, display the computed capacities of the
lower left node edges (should be the same througout all the grid).
* Change: In Unicorn, in <cgt.py>, uses the new parameters names for
edge density.
In CRL Core configuration files, "display.conf", "patterns.conf" and
"technology.conf" share most of their code. So that common part is put
into "common/" and sourced from the final configuration file.
Update the documentation according the the new initialization scheme.
Jean-Paul Chaput
EricLaoGitHub