Miscellaneous:
* Change: In <crlcore>, in display.conf use the same display threshold
for both METAL2 & METAL3.
In alliance.conf, the side of VIAs in the gauge is 2l (not 3l).
In kite.conf, separate edge densities for H/V.
* Change: In <Cell>, in flattenNets() use flag as argument, not a
boolean. Do not create rings for clock or supply nets.
* Change: In <DeepNet>, in _createRoutingPads() do not create rings
for clock or supply net (duplicated policy as in Cell::flattenNets()).
* Bug: In <ControllerWidget>, at last find the bad signal disconnect
that was causing ungraceful messages.
* Change: In <knik>, in Edge display occupancy/capacity in the string
name. Improved display progress and debugging capabilities.
Improved exception catch & breakpoint managment:
* Bug: In <PaletteWidget>, in updateExtensions() replace the calls to
deleteLayer() by delete. This cause the widget to be immediatly
erased instead of waiting for the event queue to be completly
processed. This was causing the widget to be left in a incoherent
state when stoping at a breakpoint.
* Bug: In <BreakpointWidget>, in execNoModal(), flush the main event
loop (QApplication::flush()) *before* lauching the *local* event
loop. This is to ensure all widgets are in their final state when
waiting (especially <PaletteWidget>).
* Change: In <ExceptionWidget>, new method catchAllWrapper() to
execute any std::function< void() > function/method with a "try"/
"catch" wraparound and lauch the widget in case something is catch.
* New: In <hurricane>, support for a oberver pattern, backported from
<katabatic> with an Obervable capable of being linked to any
number of Obervers.
* New: In <Cell>, made it observable to detect Cell change, currently
emit two kind of signals:
- Cell::CellAboutToChange : *before* any change.
- Cell::CellChanged : *after* the change has been completed.
* New: In <UpdateSession>, in Go::invalidate() add the Cell owning the
Go to the UPDATOR_STACK (of course the cell is added only once).
In addition, when the Cell is added, send a notification of
Cell::CellAboutToChange to all it's observers. The slave instances
are also invalidated.
Conversely in UpdateSession::_preDestroy() for each invalidated
Cell send a Cell::CellChanged notification to all observer.
The UPDATOR_STACK has been slightly amended to accept Cell which
are not Gos. Prior to this, the Cell where completly excluded from
the UpdateSession mechanism, so it's instances where never actualised
of anything referring to the Cell for that matter.
Note: we use two different mechanisms to transmit a Cell change,
observers and the slave instance map. I think at some point it
should be unificated.
* Change: In <CellViewer>, make it a Cell observer to redraw when the
cell is modificated (also update the palette).
Uses the catchAllWrapper() to protect all critical actions.
* Change: In <GraphicTool>, no longer need of cellPreModificated and
cellPostModificated signals. Now done through the Cell obersvers.
* Change: In <mauka>, <etesian> & <kite> now uses the catchAllWrapper
method for protection (need to split methods in two, to be able
to pass it as argument). No longer emit cellPreModificated and
cellPostModificated.
Support for RoutingGauge in P&R:
* Bug: In <placeandroute.py>, the connection from the internal power
ring to the connectors was not done correctly. Wrong contact layers
leading to a gap.
* Change: In <BuildPowerRails>, detection of the corona signals based
on how the "pck_px" pad is connected. No longer based on name
matching.
* Change: In <placeandroute.py>, support for 2 routing metal only
(3 metal in the technology).
* Change: In <katabatic> & <kite> support for a "top layer" limitation
on the routing gauge, this allows to use only two routing metals
(METAL2 & METAL3). Work in progress.
- New: Added FreeBSD/Ubuntu patches from Otacilio De Araujo
(<otaciliodearaujo@gmail.com>).
* ./katabatic:
- New: Makes use of cbug to display the (scary) debug messages.
- New: In AutoSegment, adds a "_parent" attribute to keep track of the fragmentation
processus. Currently used only for strap segments, points to the original
segment in the appropriate direction (before the split).
- New: In GCell & LayerAssign, new method of layer assignment. Move up
the whole net trunk if only one of it's segment is inside an over-saturated
GCell. AutoSegment are moved up only if there is at least 2 free tracks
remaining on the upper level.
- Change: In Session::_canonize(), uses the lowest segment Id as canonical.
More reliable than geometricals criterions in the end. Assuming that the
segments are being created in deterministic order, which *should* be the
case consediring the way we are walking through the global routing.
- Change: In AutoSegment, completly suppress the CompareCanonical(), replace
it by the much simpler CompareId().
- Change: In GCell::rpDesaturate(), stops desaturation when bottom density
is under 0.5, otherwise we are causing a severe imbalance in M2/M4
densities. All wires pushed up to M4...
- Change: In ChipTools, for the Pad's RoutingPad, reslect the best component
using the one in the lowest layer. To avoid problem when splitting
AutoContact as we expect the base Contact to be on the lower layer.
- Bug: In GCellConfiguration::_GCell_xG_xL1_xL3(), add H/V alignement constraints
in fork case. This allow NE/SW contact to be splitted correctly later.
- Bug: In AutoContact::split(), the connexity on the splitted contacts was
not correctly restored, leading to canonization and parentage looping
errors. This was concealed by the Kite Track::_check() bug (incomplete
individual TrackSegment checking).
- New: ChipTools, regroup all datas and utilities to manage a full-chip
design.
- Change: In LoadGrByNet/GCellConfiguration::_GCell_xG_1Pad(), uses straight
perpandicular wires on top & right pads. The GCells under those connectors
are fully saturated, wires must go out as straight as possible.
- Change: In AutoHorizontal/AutoVertical, update the "terminal" flag after
slackening. This is to avoid global that are no longer connected to
terminals behave as such.
- Change: In AutoSegment::canMoveUp() & canPivotUp(), prevent all local segments
to go up. This is to avoid cluttering upper levels with small segments.
- Change: In GCellConfiguration, for xG_xL3, detect straight vertical topologies
and for them to be fixed (new flag FIXED_GLOBAL set by the topological
builder instead of the constructor). This prevent the router to do
stupid things...
To sets the "Fixed" flag *after* the axis of global segments have been
positionned correctly adds a "_toFixGlobals" static table lookup.
- Change: In GCell::stepDesaturate(), if less than one free track remains in
the upper layer, do not move up the segment. This allows from a minimum
free room for expansion.
- Change: In GCell::_getString(), display indexes and layer names in various
saturation tables.
- Change: In AutoSegment, allow move up of local Segment. ::moveUp() and
::canMoveUp() arguments go from booleans to flags, which are more
explicits.
- Change: In loadGlobalRouting(), more exlicit message as to why a net is
filtered out the routing set (POWER, GROUND, CLOCK or BLOCKAGE).
- New: ChipTool, module with utilities specific to chip routing. Containing
a function to pre-break wires around a block.
- New: In loadGlobalRouting/GCellConfiguration, adds supports for RoutingPad
connected on chip's pad.
- New: In GCellGrid/GCell, can compute the density in three modes: average,
max of H/V and max of layer. Currently implemented in getMaxHVDensity(),
should be unificated with getDensity(). Used for display purposes.
- Bug: In AutoContact, when splitting a contact, add a specific check for
"one layer span".
- Bug: In AutoSegment::canMoveUp(), do not move up fixed segments.
./metis,
./mauka,
./katabatic,
./kite :
- Change: switch toward the XML configuration system. Suppress the need
of a default static configuration (now built on demand from the XML
database).
In Mauka and Kite, suppress the ConfigurationWidget, wich are
obsoleted by the generic XML configuration widget.
- Change: In KatabaticEngine, the containers used to store the "nets to
route" is changed from a vector<> to a set<> sorted by the Nets names.
Uses more memory but allows much faster Net deletion.
- New: In _loadNetGlobalRouting(Net*), detect non-routed Nets. A Net is
considered as unrouted if it's 10 first RoutingPads have no slave
Segment. The Net is withdrawn from the set of Nets to route.
- Bug: In GCellConfiguration::_GCell_1G_1L1(), correctly compute the
access flag passed to _GCell_rp_Access().
- Change: In AutoContact::restrictConstraintBox() adds "warnOnError"
parameter to shut down warnings.
- New: KatabaticEngine::_computeNetConstraints() now also returns a set<>
of segments on which constraints are incompatibles. All the NetConstraints
related functions are modificateds accordingly.
- Change: In KatabaticEngine::_loadNetGlobalRouting(), create dogleg
on overconstrained Segments computed by a call to _computeNetConstraints().
Overconstraineds Segments can occurs when a global is directly
connecting two punctual RoutingPads (see "ieee_division").
As a side effect, and to avoid looping each Net is revalidated
*before* making any dogleg. So Nets are revalidated one by one instead
of alltogether.
- Change: In AutoSegment::_toConstraintAxis(), do nothing if constraint
interval is empty.
- Bug: In top CMakeLists.txt the SETUP_PROJECT_PATHS was not inserting
X_USER_TOP *before* X_TOP, thus potentially allowing an obsolete
system-wide configuration to shadow an up-to-date local one.
* ./katabatic:
- Change: In Configuration/KatabaticEngine, introduce a static Configuration
object (singleton) to handle the default configuration. Configuration are
now created only through cloning operations. In KatabaticEngine, the
_configuration becomes a pointer (previoulsy an value).
Confifuration becames a singleton and a decorator.
Also adds a print method to nicely display configurations values on
the terminal.
- Change: In Grid/BaseGrid, add an Abutment Box attribute (to facilitate
segment truncation in Kite::TrackFixedSegment.
- Change: In Grid/BaseGrid::Axis, when computing a row/column index using
the graduation table, if the coordinate is exactly on the last
graduation, return the last GCell instead of "out of bound".
- Change: In GCell::hasFreeTrack(), AutoSegment::canMoveUp() &
AutoSegment::canPivotUp() adds a "reserve" parameter to modify the
amount of wirelength to remains free after the insertion.
- Bug: In GCell, bad cast between <size_t> and <unsigned int>, showed only
under 64 bits.
- New: In KatabaticEngine::printMeasures(), adds a support for measurments,
both time and memory size in Mb are stored for each tag.
- New: Adds measurements "Gates", "GCells", "load" & "assign".
./coriolis/src/crlcore,
./coriolis/src/knik,
./coriolis/src/katabatic,
./coriolis/src/kite,
./coriolis/src/equinox,
./coriolis/src/solstice,
./coriolis/src/ispd:
- SVN MOVE: Source tree simplification & uniformisation. Now all tools
are at the same level, directly under the root of the repository.
No more "coriolis/src".
Jean-Paul Chaput