Commit Graph

20 Commits

Author SHA1 Message Date
Jean-Paul Chaput 9846330b91 Remove non-needed Python Development.Module requirement in CMakeLists.txt. 2023-08-09 10:11:54 +02:00
Jean-Paul Chaput 30b92ff33a Add a flag througout all the build system to manage manylinux (PyPI).
* New: In boostrap/FindBootstrap.cmake, add a macro setup_qt() to
    share Python detection across the various tools.
      This macro takes into account the USE_MANYLINUX variable to
    slightly change the Python detection. On a "normal" system we
    look for "Development" (search for dynamic libraries) while under
    manylinux we look for "Development.Module"(static linking).
* Change: In bootstrap/ccb.py, add a new option --manylinux.
* Change: Cleanup in the various CMakeLists.txt to use setup_qt().
2023-07-03 19:54:01 +02:00
Jean-Paul Chaput 57b5cca27f Downgrade CMake requirements to 3.16. Detects correctly Python 3.
Fix courtesy of N. Shimizu.
2023-03-03 15:36:40 +01:00
Robert Taylor a02c88a893 Don't link libpython, it isn't there in manylinux 2023-02-21 16:10:55 +01:00
Robert Taylor eb26bb1f87 fix to build on manylinux 2023-02-21 16:10:55 +01:00
Jean-Paul Chaput e590400ebb Add DoIt base design flow support. In full replacement of Makefiles. 2022-12-31 15:01:37 +01:00
Myrtle Shah 2d24efdb6c Bump minimum CMake version
The CMake version set was so old that obsolete policies were being
enabled and breaking FindPython. 2.8 should still be old enough not to
cause problems for any current users.

Signed-off-by: Myrtle Shah <gatecat@chipflow.io>
2021-10-15 13:38:38 +01:00
Jean-Paul Chaput 02777e127e Migration towards Python3, first stage: still based on C-Macros.
* New: Python/C++ API level:
  * Write a new C++/template wrapper to get rid of boost::python
  * The int & long Python type are now merged. So a C/C++ level,
    it became "PyLong_X" (remove "PyInt_X") and at Python code
    level, it became "int" (remove "long").
* Change: VLSISAPD finally defunct.
  * Configuration is now integrated as a Hurricane component,
    makes use of the new C++/template wrapper.
  * vlsisapd is now defunct. Keep it in the source for now as
    some remaining non essential code may have to be ported in
    the future.
* Note: Python code (copy of the migration howto):
  * New print function syntax print().
  * Changed "dict.has_key(k)" for "k" in dict.
  * Changed "except Exception, e" for "except Exception as e".
  * The division "/" is now the floating point division, even if
    both operand are integers. So 3/2 now gives 1.5 and no longer 1.
    The integer division is now "//" : 1 = 3//2. So have to carefully
    review the code to update. Most of the time we want to use "//".
    We must never change to float for long that, in fact, represents
    DbU (exposed as Python int type).
  * execfile() must be replaced by exec(open("file").read()).
  * iter().__next__() becomes iter(x).__next__().
  * __getslice__() has been removed, integrated to __getitem__().
  * The formating used for str(type(o)) has changed, so In Stratus,
    have to update them ("<class 'MyClass'>" instead of "MyClass").
  * the "types" module no longer supply values for default types
    like str (types.StringType) or list (types.StringType).
    Must use "isinstance()" where they were occuring.
  * Remove the 'L' to indicate "long integer" (like "12L"), now
    all Python integer are long.
* Change in bootstrap:
  * Ported Coriolis builder (ccb) to Python3.
  * Ported Coriolis socInstaller.py to Python3.
  * Note: In PyQt4+Python3, QVariant no longer exists. Use None or
    directly convert using the python syntax: bool(x), int(x), ...
    By default, it is a string (str).
* Note: PyQt4 bindings & Python3 under SL7.
  * In order to compile user's must upgrade to my own rebuild of
    PyQt 4 & 5 bindings 4.19.21-1.el7.soc.
* Bug: In cumulus/plugins.block.htree.HTree.splitNet(), set the root
    buffer of the H-Tree to the original signal (mainly: top clock).
      Strangely, it was only done when working in full chip mode.
2021-09-19 19:41:24 +02:00
Jean-Paul Chaput 68e45bc5ab Groudwork for routing density driven placement. Compliance with clang 5.0.1.
This commit contains two set of features that should have been commited
separately.
  1. Compliance with clang 5.0.1, tested with the RedHat collection
     llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS)
     with Xcode & macports. The bootstrap install system has been modificated
     accordingly.
  2. The basic support for routing density driven placement. Related
     features are:
     * Bloat property. Each Occurrence of an Instance can be individually
       bloated. This property not attached to any tool to allow the placer and
       router to share it as wanted. Nevertheless, it is defined in Etesian.
     * BloatProfile in Katana, add individual Bloat properties to Instances
       occurrences based on the East & North overflowed edges of each GCell.
     * Support in ToolEngine for a "pass number" of a tool. This pass number
       is mainly used to make "per pass" measurements. The MeasureSet system
       is improved accordingly to support multiple values of a same measure.
     * Embryo of "P&R Conductor" to perform the place & route loop until the
       design is successfully placed. May be the first brick of a Silicon
       Compiler.

* Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to
    the python component for macport (ex: python27).
* Change: In boostrap/build.conf, put etesian before anabatic for
    instance occurrence BloatProperty dependency.
      Added option support for the "llvm-toolset-7" collection to build
    against clang 5.0.1.
* Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates
    for first & second arguments must be called with <const T> and <const U>
    as the pair itself is const (and not simply <T> & <U>).
* Change: In Hurricane::getSlot() temlate, only use "string" arguments and
    not const string&, simpler for template argument deduction.
* Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<>
    template has a static member "_name". Clang did show that the template
    for this static number has to be put inside the namespace where the
    template *is defined* (i.e. Hurricane) instead of the namespace where
    it is instanciated (i.e. Analog).
* Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must
    be put outside the C linkage back in the Isobar C++ namespace (clang).
* Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification
    (clang).
* Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change
    signature so it matches the one of the base class (clang).
* Bug: In Hurricane::CellPrinter, use double brackets for initializer list
    (clang).
* Change: In Hurricane::Breakpoint, reverse the meaning of the error level.
    Only error level *lesser or equal* than the stop level will be enabled.
* Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the
    current working directory in the sys.path as in certain configuration
    it may not be included.
* Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when
    encountering a RoutingPad on a top-level Pin Occurrence. The segment
    was generated in the wrong direction, creating DRC violations on the
    "mips_core_flat" example.
* Change: In CRL::Measures, partial re-design of the measurements management.
    Now, each kind of measure can accept multiple values put in a vector.
    The index is intented to match a tool run number.
* Change: In CRL::Histogram, add support for multiple sets of datas,
    indexeds with tool run number.
* Change: In CRL::ToolEngine, add support for multiple pass number, add
    addMeasure<> templates for the various data-types.
* Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record
    name constants.
* New: Etesian::BloatProperty, property to attach to Instance occurrences
    that contains the extra number of pitch to add to the cell width.
* Bug: In AutoSegment::CompareByDepthLength, the segment length comparison
    was wrong, it was always returning true, which broke the "strick weak
    ordering" of the comparison.
      This was producing a core-dump in GCell::updateDensity() when sorting
    a vector<>. The end() iterator was being dereferenced, leading to the
    problem.
* Bug: In Katana::DataSymmetric::checkPairing(), the test for segments
    whose axis is perpandicular to the symmetry axis was wrong
    ("!=" instead of "-").
* New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells()
    and selectBloatedInstances() to automatically select segments from
    overloaded edges, overloaded GCells and bloated cells.
* Change: In KatanaEngine, return a more detailed success state, distinguish
    between global and detailed.
      Add support for multiple routing iterations.
* New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing
    driven placement.
2019-12-09 01:57:44 +01:00
Jean-Paul Chaput 2b9c929f80 Compliance with cmake 3.0 (Debian 9.2). Corrects all warnings. 2017-12-02 14:30:05 +01:00
Jean-Paul Chaput d0d045b55b Starting to implement support for Windows/Cygwin.
* New: In all to CMakeLists.txt, disable the warning about deprecated
   WIN32 under cygwin.
* New: In boostrap, in ccb.py, coriolisEnv.py and builder/Configuration.py
   add recognition in uname for the values returned under Windows/Cygwin.
* New: In Documenation, in UsersGuide.rst add some informations about
   Cygwin and a section for the devel branch.
2014-07-13 13:14:49 +02:00
Jean-Paul Chaput 34e0edfd61 Cleanup after SVN importation, <ccb> builder script adaptation.
Project hierarchy reorganisation:
* With svn, we were doing a tool by tool checkout, suppressing the
  whole repository hierarchy level.
* The tools were also grouped, inside one repository, into multiple
  projects (<bootstrap>, <vlsisapd>, <coriolis>).
* We do not want to split up each tool into a separate repository,
  given their tight integration (except for vlsisapd).
* We choose to simplify, and consider all tools in a svn repository
  one project. Due to the way Git clone repositories, the directory
  containing the project is now to be seen under "src/".

CMake modifications:
* Now that the <vlsisapd> and <bootstrap> projects are merged into
  coriolis, modificate the top CMakeLists.txt of each tool to uses
  only Coriolis (and bootstrap hard wired).

CCB compile script modifications:
* Uses the new source tree hierarchy, with the project directory
  inserted.
* Remove (comment) all parts relateds to svn managment.
* Git is sufficiently simple so that we do not want to integrate
  command shortcut into the script.

SVN cleanup:
* Remove the obsolete <chamsin> tool, that has become the full fledged
  <chams> project long time ago.
2014-02-26 18:24:41 +01:00
Jean-Paul Chaput b99ccda839 * ./bootstrap:
- New: Complete rewrite of builCoriolis.py & merge with easyChams to provide
        a graphical interface. Asides to the GUI, when run in graphic mode all
        settings are kept from run to run. Meaning that once the initial setup
        is done, a user may completly forget where things are... The new tool
        is named <ccb> for 'Coriolis & Chams Builder'.
          The Builder is now a module, that is split into multiples files.
        The old buildCoriolis.py is kept for the time beeing to ensure a smooth
        transition.
2013-01-12 14:57:35 +00:00
Damien Dupuis 7ed659641e execution rights were missing 2011-09-15 10:39:26 +00:00
Damien Dupuis 68a0219bd5 install buildCoriolis.py to bin so user can found it in /asim/coriolis2/bin/buildCoriolis2.py in default installation 2011-09-15 10:35:14 +00:00
Jean-Paul Chaput 19b8436da0 * <All Tools>/CMakeLists.txt:
- Change: For the setup_sysconfdir() boostrap/cmake macro uses the
        CMAKE_INSTALL_PREFIX to guess where we are being installed.
        Should be more reliable than any *_TOP environment variable.

  * ./bootstrap:
    - Change: In builCoriolis.py, detect not only when the X_TOP is not
        sets but also when it's sets to an empty value. In either case
        gives priority of the X_USER_TOP over the X_TOP.
2011-02-15 13:15:24 +00:00
Damien Dupuis 4d3936fe3f Using BOOTSTRAP_TOP instead of CORIOLIS_TOP 2011-02-02 15:26:08 +00:00
Jean-Paul Chaput c356715d80 * ./bootstrap:
- Change: Now installing coriolisEnv.py & coriolis2.sh to simplificate
        the environement initialiszation for students.
2010-12-13 14:00:40 +00:00
Jean-Paul Chaput 0258a0fd90 * All Tools:
- Change: Switch from "goodies" to "bootstrap".
2010-07-14 19:50:21 +00:00
Jean-Paul Chaput 34720e3844 Forgotten. 2010-07-13 11:26:04 +00:00