* Move all Python stuff under a common Python namespace "coriolis".
* Instead of having a series subtrees for each tool, integrate
everything in one common tree. So now, all components can be
located either with an absolute path from "coriolis" or, inside
cross-reference themselves through relatives imports.
* As a consequence, we only need to add ".../site-packages/coriolis/"
to the PYTHONPATH, and not a whole bunch of subdirectories.
And nothing, if installed in-system.
* The tree of free technologies configuration files is also moved
below "coriolis/technos" instead of "/etc".
* Supressed "cumulus" level for the plugins.
* All python modules are rewritten using relative imports except
for the configuration files that uses absolute import as they
can be cloned outside of the tree to serve as templates.
* Change: In boostrap/FindPythonSitePackages, include "/coriolis" in
Python_CORIOLISARCH and Python_CORIOLISLIB.
Provide a Python_SITELIB *without* "/coriolis" appended.
* Change: In cumulus/plugins/__init__.loadPlugins(), must prefix modules
read in the plugins directory by "coriolis.plugins.". No longer need
to add their path to sys.path.
* Change: In crlcore/python/technos/nodeX/*/devices.py, the scripts of
the layouts generators must be prefixed by "coriolis.oroshi.".
* Change: In CRL::System CTOR, no longer add the pathes of the various
plugins to sys.path. Only "site-packages/coriolis/".
* New: In Utilities::Path::toPyModePath(), new method to convert a
filesystem path into a python module path.
Examples:
"coriolis/plugins/block" --> "coriolis.plugins.block".
"coriolis/plugins/rsave.py" --> "coriolis.plugins.rsave".
* Change: In katanaEngine::_runKatanaEngine(), rename the hook script
initHook.py. No longer need to modify sys.path.
* Change: In BoraEngine::_runBoraEngine(), rename the hook script
initHook.py. No longer need to modify sys.path.
* Change: In UnicornGui::_runUnicornInit(), rename the hook script
initHook.py. No longer need to modify sys.path.
* Change: In cumulus.plugins.chip.constants, put the constants
outside __init__.py to avoid a loop at initialization.
When placing a vertical M1 (and setting it's axis), the perpandiculars
M2 extremities changes, and they have a VIA. If they are already placed
too, they may silently create a stacked VIAs because the track markers
of the perpendiculars are not taken into account. Now, force to rip them
up so the markers will be re-read. If no stacked VIAs has been created,
the segment will be re-put at it's previous place, otherwise it will be
placed on another track.
* New: Track::hasViaMarker(), check if a marker of a Net is under a
given interval (so we can know we are about to create a VIA stack).
* New: Manipulator::avoidStackedVias(), ripup perpandiculars to the
current segment that *may* create stacked VIAs. That is perpandicular
in the *up* layer which begin or end on the moved vertical.
* New: In SegmentFsm::insertInTrack(), bindTotrack() & moveToTrack(),
call Manipulator::avoidStackedVias(), if activated.
* Change: In NegociateWidow/loadRoutingPads(), no longer exclude clock
nets. So the TrackMarkers are created for the root net.
* New: In KatanaEngine::digitalInit(), when using a "VH,2RL" style,
protect all RoutingPads of each net, because unlike "2RL+" style,
the standard cell RoutingPads are not in a "below" layer only
used inside the cell, but on the V layer. So the area of the RP,
even if not fully used to connect, must be protected.
* Change: In NegociateOverlapCost(), when computing cost from a fixed
or blockage, do not set the infinite flag if it's the *same* net.
* New: In KatanaEngine::protectRoutingPads(), add a new "flags" argument
to pass on whether we want to protect the the RP candidates or just
the non-used ones.
* Change: In protectRoutingpad(), change the formula (again) to compute
the berth to give to a fixed segment... Should really try to
summarize all the case.
* Change: In TrackFixedSegment::getNet(), no longer return the blockage
net if the real net is tagged as clock.
* New: In Katana::Configuration, added option:
"cfg.katana.disableStackedVias" (default to false), so the router
do not stack VIAs on top of each other.
* Bug: In NegociateWindow::loadRoutingPads(), create TrackMarkers using
the right depth when the gauge starts with non-routable ones.
* New: In Track::addOverlapCost(), when disableStackedVias is active,
uses the markers from the below terminals to tag the cost as
"infinite", so the track *cannot* be used by the marker's net
owner. Can be refined by checking that we are not at a segment's
end but will do for now.
* New: In NetBuilderHybridVH::_do_1G_xM1_1PinM1(), added configuration
to manage pins on the north/south sides for VH,2RL.
* Bug: In NetBuilderHybridVH::doRp_xG_xM1_xM3(), correct misplaced
vertical creation (buildind invalid topologies).
* New: EtesianEngine::toColoquinte(), display histograms of the cells
widths (in pitch) before and after bloating to get a better feeling
of the behavior.
* New: In EtesianEngine, add support for track avoidance. Portions of
tracks to avoid are specified by a Box, which should flat and on
the axis of the request track. This feature is used by the H-Tree
to clear the vertical tracks under the tree from any terminal.
* New: In Etesian::Area, Slice and SubSlice, add support for track
avoidance. Exported to the Python wrapper.
* New: SubSlice::getUsedVTracks() to get a set of tracks blocked by
the cell.
* New: SubSlice::trackAvoid(), shift left/rigth the cell under the
requested vertical track. Try only to move the cell under the
track and not it's neighbor, so it assume that there is sufficient
space left or right of the cell.
* Bug: In cumulus/plugins.block.configuration.BlockConf, the Cfg
parameters may be read too early from the Cfg space into the
various sub-conf objects (like FeedsConf). Delay the reading
of the parameters in a _postInit() functions.
Modify Block and CoreToChip to call _postInit().
* New: In cumulus/plugins.block.configuration.BlockConf._loadRoutingGauge,
allow the cell gauge name to differ from the routing gauge name.
* New: In cumulus/plugins.block.configuration.FeedsConf, allow to
select the default feed to be used with 'etesian.defaultFeed'
parameter.
* New: In cumulus/plugins.block.spares.BufferPool, allow to control
whether or not we want tie to either side of the pool.
(for latch up).
* New: In cumulus/plugins.block.HTree._connectLeaf(), add support
for track avoidance.
* Bug: In cumulus/plugins.block.HTree._connectLeaf(), the TL2 contact,
the one on the *top* auxiliary buffer seemed to have been badly
positioned until now (too low, not using tl2Y).
This is strange because it should have caused disconnections,
but I didn't see it in the wiring and the regressions tests didn't
flag anything wrong. Still a bit weird and worrying.
Previously, the relevant NetBuilder and routing strategies where
directly guessed from the RoutingGauge traits. This is no longer
doable as the combinations increases. Now to configure both the
global and detailed router we need three "parameters" :
1. The routing gauge itself (tells which layers are in which
directions) and how to make the VIAs.
2. The NetBuilder to use, they are identified by strings.
Currently we support:
* "HV,3RL+", for all SxLib derived standard cells.
* "VH,2RL", for hybrid routing (over the cell, but terminals
are also in the first RL).
* "2RL-", for strict channel routing.
* "VH,3RL+", an attempt for FreePDK 45, not optimized enough
to be considered as usable.
3. The routing style, mostly affect the way the GCell grid will be
built.
* VH : first RL is V.
* HV : first RL is H.
* OTH : Run in full over-the-cell mode (needs at least 3RL).
* Channel : Run in *strict* channel routing mode (no routing over
the standard cells).
* Hybrid : Create channels, but can use H tracks over the
standard cells.
Thoses three parameters are partly overlapping and must be sets in
a consistent manner, otherwise strange results may occurs.
* New: CRL::RoutingGauge::getFirstRoutingGauge(), to get the lowest
layer available for routing (not a PinOnly, not a PowerSupply).
* Change: In CRL::RoutingGauge::isHV() and isVH(), were previously
always returning false when the gauge was 2RL only. Now, check
on the first usable RL.
* Bug: In cumulus/plugins.block.configuration._loadRoutingGauge(),
there was a bad computation of the deep RLs when the top layer
was not defined. Occured for 2RL gauges only.
* Bug: In Anabatic::RpsInRow::slacken() (LayerAssign), forgotten curly braces
in the test to skip METAL2 terminals.
* Change: In Etestian::BloatChannel::getDx(), adjust the bloating
policy to converge on Arlet6502. Always ensure that there is
a 50% ratio between terminal used V-tracks and free ones.
If there is more than 80% of terminals, add one more track.
* Bug: In AnabaticEngine & KatanaEngine, KatanaEngine is a derived
class of AnabaticEngine. They uses Anabatic::Configuration
and Katana::Configuration that also derives from each other.
I though I had made one configuration attribute in the base
class that was using the right Configuration. But no. I did
have two configurations attributes, one in AnabaticEngine and
one in KatanaEngine, the later "shadowing" the former. As a
results, parameters modified in AnabaticEngine, *after* the
initial creation of the tool *where never seen* at Katana
level (due to it's own duplicate). What a mess.
Now there is only one attribute in the *base* class Anabatic,
which is created through a new virtual function _createConfiguration()
called in _postCreate() which allocate the right Configuration
according to the dynamic type of the tool (KatanaEngine).
In KatanaEngine, access the configuration through the
attribute (_configuration) and not the accessor (getConfiguration()).
* Bug: In KatanaEngine, no longer directly use the _configuration attribute
(which is not accessible anyway) but the getConfiguration() accessor.
The accessor perform a static_cast from the Super::getConfiguration()
into Katana::Configuration.
Complete cleanup of the various configuration accessors.
* New: AnabaticEngine::setupNetBuilder(), perform an early check
of the requested NetBuilderStyle. The NetBuilderStyle is just a
string that will be matched against the (hard-coded) supported
NetBuilders. Then check the topological characteristics against
the capabilities of the gauge (HV, VH and so on).
Still a bit too hard-coded for now.
This function has been split from AnabaticEngine::_loadGrByNet().
* Change: AnabaticEngine::isChannelStyle() renamed from isChannelMode().
* New: In Anabatic::Configuration, two new attributes to select the
topology and routing style:
- _netBuilderStyle to explicitely select the NetBuilder to use.
It's a string, which is provided by each NetBuilder.
- _routingStyle to define how the overall routing will work.
It's a set of flags (StyleFlags):
* VH : first RL is V.
* HV : first RL is H.
* OTH : Run in full over-the-cell mode (needs at least 3RL).
* Channel : Run in *strict* channel routing mode (no routing over
the standard cells).
* Hybrid : Create channels, but can use H tracks over the
standard cells.
* New: In anabatic/Constants, add StyleFlags to define how the router
should operate (see above).
* Bug: In Anabatic::GCell, in CTOR, no reason to set up the HChannelGCell flag.
* Bug: In Anabatic::GCell::updateDensity(), when computing layers non contiguous
saturation, do not systematically skip RL 0, but only if it's PinOnly.
* Change: In Anabatic::NetBuilder, rename isTwoMetal by isStrictChannel.
* Change: In Anabatic::NetBuilderHV, rename doRp_AccessNorthPin() in
doRp_AccessNorthSouthPin(). More accurate.
* Bug: In NetBuilderHV::_do_1G_xM1_1PinM2(), the wires to connect the M1
terminals where created *twice*. Uterly stupid, there where placed in
overlap by the router!
* New: In AnabaticEngine, new accessors to the NetBuilderStyle and
RoutingStyle, proxies towards Configuration.
* Bug: In Manipulator::relax(), if there are two doglegs to be done, but
they are in the same GCell, only do one (the conflicting interval)
is short.
* Change: In Katana::Session, rename isChannelMode() into isChannelStyle().
* Change: In TrackSegment::isUnbreakable() and isStrap(), return false
when the base segment is a *weak global* (aligned with a global one).
* Change: In Katana::Row::createChannel(), correctly distinguish between
*strict channel* style and *hybrid* style. Tag the GCells as std cells
row or channels only in the former case.
* Change: In AutoSegment::canReduce(), allow reduction, when in channel
mode, for bottom connected jumpers at depth 1. Forbidden otherwise
as it may cause problems with the terminals (in OTC).
* Change: In TrackSegment::canRealign(), allow realignement of reduced
segments. What really needs to be checked is that it do not have
perpandiculars in reduced state.
* New: In Katana::NegotiateWindow::_negociate(), if the realign stage is
enabled, perform a second stage of repair after it. To do this we
need to reverse the state of events marked as FailedRepair to Repair.
We isolate the repair stage in a new dedicated function,
NegociateWindow::_negociateRepair(). Maybe should do the same for
each other negociate stage.
* New: In Hurricane::RoutingPad, added support if the supporting component
is a Pad. The source/target positions are computed according to the
most likely direction.
Change the _getEntityAsComponent() function into an inline template
_getEntityAs<T>().
Change the flags from an enum to static const uint32_t.
* Change: In Anabatic::Configuration, use _getEntityAs<T>.
* Change: In Anabatic::Dijkstra, use _getEntityAs<T>.
* Change: In Anabatic::NetBuilder, use _getEntityAs<T>.
* Change: In Katabatic::LoadGrByNet, use _getEntityAs<T>.
* Change: In Katana::ProtectRoutingPads, use _getEntityAs<T>.
* Change: In Bora::AnalogDistance, use _getEntityAs<T>.
* Change: In Etesian::EtesianEngine, use _getEntityAs<T>.
* Update: In CRL/node600/phenitec/kite.py, update the routing gauge to
the new format. So now we can use again SxLib-2M (channel routing
SxLib for two metal technologies).
* Change: In CRL::BlifParser, if a master cell is not found in the
AllianceFramework, then try in the Blif supplied libraries.
This is used to load the zero, one and tie cells.
Add a Blif::getCell() static function to look into the Blif
supplied libraries.
* Change: In CRL::LefImport, sometimes there can be discrepencies between
the LEF ROUTING layers and the Coriolis routing gauge. Now ignore
routing layers that are *not* presents in the Coriolis gauge.
* Change: In AnabaticEngine, moved routingMode attribute from KatanaEngine,
as some setup operations needs it.
* Change: In AutoSegment::canReduce(), allow fixed segments to be reduced
if they are "jumpers" (turn+turn and top+top or bot+bot).
This case arise on the edge of routing channels for fixed wires
to connect terminals.
* Change: In AutoSegment::getTopologicalinfos(), compute differently the
(leftBound,rightBound) interval when in channel mode.
In over-the-cell mode, this interval is the one of the whole
GCells under the wire. In channel mode, for fixed wires (that is,
verticals connecteds to cells) this interval is reduced to half
the GCell height, on the connected side of said channel.
This allows Manipulator::_insertToTrack() to issue disantangling
requests (push left/push right) for fixed segments that are face
to face in the channel.
* Change: In Anabatic::Configuration CTOR, allow the cellGauge to have a
different name from the routingGauge. Now if the cell gauge that
should match the routing gauge is not found, fallback to the
name set in "anabatic.cellGauge" parameter.
Case occur when we try to match with CORE sites from LEF files.
* Change: In Etesian::Configuration CTOR, same change as in the
Anabatic configuration.
* Change: In Anabatic::GCell::updateDensity(), never set the GoStraight
flag in channel mode. This flag makes sense when there is at least
4 routing layers (so we have 2 contiguous free of blockages).
* Bug: In Anabatic::Session::_getNearestGridpoint(), sometimes the nearest on
grid point is outside the constraint box. Now force the point
to remains inside constraints even if offgrid.
* Change: In Katana::DataNegociate::update(), perpandiculars that are
either reduced or in non-preferred routing direction should not
trigger a bug message.
* Change: In KatanaEngine::_check(), do not check for fixed, horizontal
non-prefs AutoSegments in channel mode (avoid false bug display).
* Bug: In Manipulator::_forceToTrack(), slighty shrink (-1) the interval
to free. The intersection function of intervals returns true when
the two intervals *exactly* touches (1.vMax == 2.vMin). But in
this specific case, they are not *overlapping* and no action
should be taken...
* Bug: In Manipulator::_insertInTrack(), do not reject the track when
we are overlapping a fixed vertical segment in channel mode.
(Hmm, maybe already corrected by the previous one).
* Change: In Katana::NegociateOverlapCost(), in channel mode, do
not put two overlaping vertical fixed segments into infinite cost.
This happens when two cell connected verticals are face to face in
a channel. We want them negociated the track (by shrinking their
length) instead of excluding it right away.
* Change: In NegociateWindow::createTrackSegment(), in channel mode,
do not attempt to create a track segment over a fixed and reduced
AutoSegment.
Do not attempt to put a non-preferred AutoSegment on a Track
either.
* Bug: In RoutingEvent::revalidate(), the number of availables tracks
was badly computed when in the pure constraint case, when there
was only one it was reporting zero.
* Change: In TrackElements::TrackElements_Perpandicular::Locator,
do not issue a bug when an non-pref or reduced AutoSegment do not
have an associated TrackElement.
* Change: In TrackSegmentCost::update(), do not issue a bug when a
perpandicular is reduded or non-pref and do not have a TrackElement.
* Bug: In Katana::GlobalNetTable::getRootNet(), when tracking up the
net through the plug (to look if it's connected to a top level
clock), we may encounter an *unconnected* plug.
We where not checking that case, and went crashing. Now issue
a warning and return NULL.
This indicates that, up until now, we didn't encounter any
unconnected Plug in our netlists. This did show up due to a
building error in the SRAM Standard Cell generator.
* New: In Katana::DataNegociate, add a "sameRipup" counter to keep
the *consecutive* number of time a segment is put in the same
track.
* New: In TrackSegment::setAxis(), update/reset the "sameRipup"
counter of the DataNegociate.
* New: In TrackCost, add new flag "Blacklisted" to mark Tracks that
have been riped up too much in a consecutive row.
TrackCost::Compare::operator() will then sort the blacklisted
track after the non-blacklisted ones.
* New: In SegmentFsm CTOR, raise the Blacklist flag on the TrackCost
if the "sameRipup" is above 10. This to get away from a state
well in the ripup.
* Change: In AutoHorizontal::setDuSource() & ::setDuTarget() (& AutoVertical),
check that the requested "du" is less than a pitch (this is not an
upper bound). Issue a warning if not true.
* Change: In AutoSegment::revalidate(), when passing the previous span
interval to expandToMinLength(), if we are in creation stage, make
it empty because it has no sense yet and can lead to a lock in a
too narrow span.
Change the coupled behavior of expandToMinLength() vs.
unexpandToMinLength(), the call to "unexpand" will be done on
AutoSegments that are flagged with SegAtMinArea, instead of
using the return value of "expand". This way we control across
multiple revalidate() if a segment can be "unexpanded".
* Bug: In AutoSegment::expandToMinLength(), not only try to shift left
if we are beyoond the max bound but also to the right if we are
below the min bound.
the span on the target and source were miscalculated, we must
add the half-minimal distance to get the span inside the Track.
* Change: In AutoSegment::isMiddleStack(), rename into isNearMinArea()
as we check for any *small length* set of AutoSegments and not
only the one part of a middle stack. In some rare instances,
two aligned segments can nevertheless be too short.
* Bug: In AutoSegment::reduceDoglegLayer(), when finding a reduced
segment also reset it's duSource & duTarget because it will
no longer be an isolated strip of metal.
* Change: In AutoHorizontal::updateOrient(), when there is a
source/target swap, no need to exchange the dxSource and
dxTarget extentions.
* Change: In AutoHorizontal::setDuSource() & ::setDuTarget(), check
for du bigger than the pitch, which should never occur and
display a warning.
Same modification in AutoVertical.
* Change: In Track::repair(), now invalidate the shifted segments
to ensure cache coherency with the TrackElement.
Do not take AutoSegment in non-preferred direction into
account, and especially do not try to resize them.
Now, invalidate the corrected segments (see below).
* Change: In KatanaEngine::finalizeLayout(), move the track repair
stage from here into NegociateWidow::run(). This way we avoid
the false warning about segment overlap in the data-base final
check. The false warning was because the AutoSegment where
shifted but not invalidated/revalidated leading to a cache
incoherency in the TrackElement. Now they *are* invalidated
and updated.
* Bug: In Track::checkMinArea(), do not check for minimal area when
a segment is overlapping a same net neighbor. To avoid false
minimum area violation warnings.
The decoupling of the cell gauge and the routing gauge implies that
the METAL2 & METAL3 terminals of macro blocks cannot be aligned on
the routing tracks anymore. That is, an horizontal METAL2 terminal
will not be on a track axis, but offgrid, so we no longer can use
a METAL2 horizontal segment to connect to it. Making an adjustement
between the offgrid terminal and the on-grid segment has proven
too complex and generating difficult configuration for the router.
Moreover, METLA2 terminal could be fully inside a METAL2 blockage.
So now, when the gauges are decoupled, we connect the METAL2 and
METAL3 the same way we do for METAL1: *from above* in the perpandicular
direction and using a *sliding* VIA. We assume that those kind of
terminals in upper metals are quite long.
* New: In Hurricane::Rectilinear, export the isNonRectangle() method
to the Python interface.
* New: In CRL::RoutingGauge, add function isSuperPitched() with the
associated boolean attribute. Set to true when each pitch of
each layer is independant (not low fractional multiples).
* New: In AnabaticEngine, add the ability to temporarily disable the
canonize() operation (mainly used in dogleg creation).
* New: In AutoSegment::canonize(), do nothing if the operation is
disabled by AnabaticEngine.
* Bug: In Session::_revalidateTopology(), disable the canonization
during the topology updating of a net. Too early canonization
was occuring in makeDogleg() leading to incoherencies when
performing the later canonization stage over the complete net.
Mostly occured in the initial build stage of the net.
* New: In GCell, add function postGlobalAnnotate(), if a layer
is fully blocked (above 0.9), typically, under a blockage,
add a further capacity decrease of 2 on the edges. So we may
handle a modicum of doglegs.
* Bug; In GCell::addBlockage(), removeContact(), removeHSegment()
and removeVSegment(), forgot to set the Invalidated flag.
This may have lead to innacurate densities.
* Change: In GCell::updateDensity(), more complex setting of the
GoStraight flag. This flag is now set if we don't have two
*contiguous* below 60% of density. We need free contiguous
layers to make doglegs.
* New: In NetBuilder, now manage a current state flag along
with the state flag of the *source* GCell. This flag is used
to tell if the GCell needs it's *global* routing to be done
using the upper layers (METAL4 & METAL5) instead of the
lower ones.
* New: In NetBuilder::setStartHook(), set the state flag of the
GCell to ToUpperRouting when processing a global routing
articulation and one of the base layer is obstructed
above 0.9.
In GCell with terminals, also set ToUpperRouting when there
are some in METAL2 / METAL3 and the gauge is not super-pitched.
* New: In NetBuilder, function isInsideBlockage(), to check if a
terminal is completely or partially enclosed in a blockage.
* Change: In NetBuilderHV::doRp_AutoContact(), remove support for
trying to put on grid misaligned METAL2/METAL3.
Instead systematically access them from above.
Do not cover with fixed protection terminals that are already
enclosed in blockages.
* Bug: In NetBuilderHV::doRp_AutoContact(), always add the terminal
contact in the requested GCell and not the target/source one,
in case the terminal span several GCells.
* Change: In NetBuilderHV::doRp_Access(), create the local wiring
according to the RoutingPad layer.
* Change: In NetBuilderHV::_do_xG(), _do_2G(),
create the global wiring in upper layers, according to the
ToUpperRouting flag.
* Change: In NetBuilderHV::_do_xG_xM3(), now delegate to
_do_xG_xM3_baseRouting() and _do_xG_xM3_upperRouting() if the
density at terminal level is above 0.5.
* New: NetBuilderHV::_do_xG_xM3_baseRouting() and
_do_xG_xM3_upperRouting() separated function to manage the
local routing.
* Change: In NetBuilder::_do_globalSegment(), if the currently
processed GCell or it's source is in ToUpperRouting mode,
move up the global segment. Do *not* use the moveUp() function
which would create doglegs unwanted at this stage.
* New: In KatanaEngine::annotateGlobalGraph(), call postGlobalAnnotate()
on the GCell after the blockages have been taken into accound to
add the penalty.
* Bug: In Track::getPrevious(), correctly manage the 0 value for the
index argument. Strange it didn't show earlier.
Same goes for Track::expandFreeInterval().
* Bug: In Katana::DataNegociate::update(), when computing the length of
source & target extension on a perpandicular segment, must use the
extensions of the *directly* connected AutoSegment (the baseSegment)
and not the canonical one that may be different, so with unrelated
extensions.
* Bug: In Anabatic::layerAssign(), during the step of desaturation of
GCells that contains too much terminals (i.e. lot of *local*
congestion), the desaturation threshold was har-coded to 8.
Wich is fine for symbolic cmos but way too low for Flexlib.
End result was that most straight wires where moved towards
the upper layers, creating congestion (imbalance of layer
densities).
Now the parameter:
* "anabatic.saturateRp" (default value:8) is correctly taken
into account.
* Fix: In Manipulator::avoidBlockage(), the dedicated function to check if
there is an obstacle in the way of a non-prefered routing wire (done
for metal2 connecting to terminals only) was too naive.
We were checking the tracks for obstacles crossing exactly the axis
of the segment. And for near-miss this is not enough. Now check on
the whole x-span to be used by the segment.
Code borrowed and simplified from Track::addOverlapcost().
* Change: In Manipulator::moveUp(), the default value for the extra
reservation allowing a long wire to move up need to be customized
for Flexlib/StdCellLib (allow successful routing of ChipFlow/MPW4).
Add two new configuration parameters to katana:
* "katana.longWireUpThresold1" : the length, expressed in number
of *slice height* above which a global wire is considered a
*long* wire (not close interconnect).
* "katana.longWireUpReserve1" : the extra number of free tracks
that must remains free in the up layer after the move up,
in each GCell traversed by the wire. Expressed in number of
tracks, but can be non-integer (float, for instance: 1.5).
* Bug: In Katana::PowerRailsPlane::Rail::doLayout(), to avaid tracks too
close to an offgrid obstacle in the preferred routing direction, we
expand the width/height of the segment by one pitch. BUT it seems to
still be too close for Flexlib and StdCellLib, so there is an ad-hoc
patch based on the *name* of the cell library. Update it to take
"StdCellLib" into account.
NOTE: This is likely to explain why we still got overlap in the
track coherency check in very rare occasions.
* Bug: In Katana::DataNegociate::update(), when computing the allowed
free interval for the segment axis deduced from the perpandicularly
connex segments, we account for the extension of the connecting
VIA. Those extension varies according to the kind of VIA and are
given by getExtensionCap().
We were accounting for the source & target extension VIA on the
parallel segments, assuming that source/target would not swap when
the perpandicular is moved. Which is *not* true.
Now account for the extension of the *connecting* VIA on all ends.
* Change: In AutoSegment::getTopologicalInfos(), enrich the list of
perpandicularly connected segment with wether they are connex by
their *source* or *target* contact. Mainly to be used by
DataNegociate::update().
* New: In Anabatic::AutoSegment::create(), allow the created segment to
be in any supported routing layer, and not only the bottom H & V.
Modifications impact the *two* overload of the function.
* Change: In Anabatic::NetBuilderHV::doRp_AutoContacts(), for punctual
METAL1, the protection has to be in METAL2. Bump the layer depth
to correctly use the updated verstion of AutoSegment::create().
* Change: In AnabaticEngine::checkPlacement(), for the Pin, check that
it's layer is in the routing gauge before anything else.
* New: In Katana::NegociateWindow::createTrackSegment(), if the track
nearest the segment axis (refTrack) do not exists, call a
breakpoint just before crashing.
* Bug: In CRL::MeasureSet::toStringHeaders(), check and issue a warning
if a measure label ends with a "." (dot).
* Change: In CRL::ToolEngine::getMeasure(), return the data measure
by pointer instead of by reference (easier to manipulate afterwards).
* New: In EtesianEngine::place(), add the placement runtime (under label
"placeT") to the measure set.
* New: In KatanaEngine::dumpMeasures(), add the Etesian runtime to the
set of measures.
WARNING: We are partially duplicating the informations pertaining
to the Alliance catalog (stored in the Catalog property)
directly into the Cell. This is needed for Flexlib which
is not using the Alliance loading mechanim. Ideally the
Catalog information should be moved into the Cell.
* New: In Cell, add new state flags Diode, PowerFeed (in addition to
Pad & Feed).
Export flags setter/getter to Python. For Flexlib usage.
* Change: In AllianceFramework::getInstancesCount(), correctly skip
Diode & Feeds based on Cell flags. Those flags must correctly
be set in the various Flexlib_fix.py scripts.
* Bug: In Track::repair(), when closing a same net gap, the amount the
"right" segment duSource must be shifted left was incorrectly
computed in some instances.
The previous calculation was assuming that the right edge of the
gap was at the exact same position than the source extension.
But when there is a non-preferred direction connected to it, this
is wrong. Now compute the delta accounting for a difference
between the right edge of the gap and the source extension.
* New: In AllianceFramework::getInstancesCount(), add a flag TerminalNetlist
to stop recursion on "terminal for netlist" instance level. This is to
avoid counting physical only or non-routed instances inside hard macros,
like SRAM blocks. This was leading to an overstimation of the "size"
in number of gates of the routing problem.
* Change: In KatanaEngine CTOR, call for the terminal for netlist number of
gates...
* New: In AnabaticEngine::printMeasures(), re-enable runtime & memory
footprint in measurements.
* Bug: In Anabatic::AutoSegment CTOR, correct computation of the initial
number of global segments. We were relying on the "global" flag,
which is *not* set at this stage. Now compare source and target
GCells.
* New: In KatanaEngine::runGlobalRouter(), store H-ovE & V-ovE in
measurements.
* New: In KatanaEngine CTOR, add the number of gates (flattened) to
the measurments.
* New: In KatanaEngine::runNegociate(), add the number of GCells to
the measurements.
* Change: In KatanaEngine::printCompletion(), compute the wirelengths
in either lambdas (symbolic) or *nanometers* (real).
* New: In cumulus/plugins.block.Block, add a setting to request the
Katana measurements dumping: "cfg.katana.dumpMeasures"
* Bug: In all CMakeLists.txt, it seems I was doing a worng use of
target_link_library(). No longer add dependencies to the C++ base
library but instead either to the Python associated module or
to the final binaries. This was inderectly causing the linking
problem related to Python (which was a misdirection).
* Bug: Typo in FindLibexecinfo.cmake, do not use FindLib[E]xecinfo.
* Change: In CRL/ccore/CMakeLists.txt, activate SKIP_AUTOMOC on
bison/flex generated files.
* Bug: In viewer/PyHApplication, do not delete the C++ object in
the Python destroy method.
* Bug: In Katana::Session::_addMoveEvent(), an error message is issued if
the segment is not *already* in a Track. But, it is not the case for
non-preferred Segment or reduced segment and it is valid. So suppress
the message in those cases.
* Bug: In KatanaEngine::annotateGlobalGraph(), the minimum track reservation
was not applied correctly. Instead of adding the *difference* between
the minimum and the current reservation, the minimum was simply added.
Leading to too high reservation. And loss of control about what we
were doing on the edges capacities...
Really stupid.
* New: Python/C++ API level:
* Write a new C++/template wrapper to get rid of boost::python
* The int & long Python type are now merged. So a C/C++ level,
it became "PyLong_X" (remove "PyInt_X") and at Python code
level, it became "int" (remove "long").
* Change: VLSISAPD finally defunct.
* Configuration is now integrated as a Hurricane component,
makes use of the new C++/template wrapper.
* vlsisapd is now defunct. Keep it in the source for now as
some remaining non essential code may have to be ported in
the future.
* Note: Python code (copy of the migration howto):
* New print function syntax print().
* Changed "dict.has_key(k)" for "k" in dict.
* Changed "except Exception, e" for "except Exception as e".
* The division "/" is now the floating point division, even if
both operand are integers. So 3/2 now gives 1.5 and no longer 1.
The integer division is now "//" : 1 = 3//2. So have to carefully
review the code to update. Most of the time we want to use "//".
We must never change to float for long that, in fact, represents
DbU (exposed as Python int type).
* execfile() must be replaced by exec(open("file").read()).
* iter().__next__() becomes iter(x).__next__().
* __getslice__() has been removed, integrated to __getitem__().
* The formating used for str(type(o)) has changed, so In Stratus,
have to update them ("<class 'MyClass'>" instead of "MyClass").
* the "types" module no longer supply values for default types
like str (types.StringType) or list (types.StringType).
Must use "isinstance()" where they were occuring.
* Remove the 'L' to indicate "long integer" (like "12L"), now
all Python integer are long.
* Change in bootstrap:
* Ported Coriolis builder (ccb) to Python3.
* Ported Coriolis socInstaller.py to Python3.
* Note: In PyQt4+Python3, QVariant no longer exists. Use None or
directly convert using the python syntax: bool(x), int(x), ...
By default, it is a string (str).
* Note: PyQt4 bindings & Python3 under SL7.
* In order to compile user's must upgrade to my own rebuild of
PyQt 4 & 5 bindings 4.19.21-1.el7.soc.
* Bug: In cumulus/plugins.block.htree.HTree.splitNet(), set the root
buffer of the H-Tree to the original signal (mainly: top clock).
Strangely, it was only done when working in full chip mode.
Jean-Paul Chaput
Robert Taylor
Myrtle Shah
Las Safin