coriolis/cumulus/src/plugins/rsave.py

108 lines
4.0 KiB
Python
Raw Normal View History

Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
#!/usr/bin/env python
#
# This file is part of the Coriolis Software.
# Copyright (c) UPMC 2014-2018, All Rights Reserved
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
#
# +-----------------------------------------------------------------+
# | C O R I O L I S |
# | C u m u l u s - P y t h o n T o o l s |
# | |
# | Author : Jean-Paul CHAPUT |
# | E-mail : Jean-Paul.Chaput@lip6.fr |
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
# | =============================================================== |
# | Python : "./plugins/rsave.py" |
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
# +-----------------------------------------------------------------+
from __future__ import print_function
import sys
import traceback
import os.path
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
try:
import Cfg
import CRL
import helpers
from helpers.io import ErrorMessage
from helpers.io import WarningMessage
import plugins
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
except Exception, e:
helpers.io.catch( e )
sys.exit(2)
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
def rsave ( cell, views=CRL.Catalog.State.Physical, depth=0 ):
"""
Write back layout to disk if everything has gone fine.
Must write all the sub-blocks of the core but *not* the
standard cell (mainly the feed-through).
If the model has been uniquified, in the case of a merging
of abutment box for placement, the netlist view must also
be saved.
"""
framework = CRL.AllianceFramework.get()
if depth == 0: print( ' o Recursive Save-Cell.' )
sviews = ''
if views & CRL.Catalog.State.Logical:
sviews += 'netlist'
if views & CRL.Catalog.State.VstUseConcat:
if sviews: sviews += ','
sviews += ' uses &'
if views & CRL.Catalog.State.VstNoLowerCase:
if sviews: sviews += ', no lowercase'
Bug fixes in the VST/VHDL driver coupled with BlifParser. * Change: In Hurricane::NetAlias, store additional data in NetAliasName, the external status of the former Net. When a Net::merge() is performed, we must keep track of whether the merged (destroyed) one was external and keep that information. Add NetAliasHook::isExternal() & NetAliasHook::setExternal() virtual methods. * Change: In Net::getNet() add a new optional argument to allow the search of the net name in *internal* aliases. Otherwise only the aliases tagged as *external* will be searched. It was a bug that, when looking for a Plug master net by name we got an homonymous internal net. In that case we must only look for net that are (or where) part of the interface. * New: In Vhdl::VectorSignal, when a vector contains only one bit, unvectorize it, like when it is non-contiguous (we use the isCountiguous() method to carry that information). * New: In Vhdl::VhdlEntity, Catalog::State and NamingScheme, added a flag UniquifyUpperCase to uniquify the names in uppercases. In case of a clash with the same name in lowercase. Prepend 'u' before all previously uppercased letter. For example 'VexRiscV' becomes 'uvexuriscuv' (urgh!). The Catalog flags is exported to Python for use by the blif2vst script. * Change: In BlifParser, Model::newOne() and Model::newZero(), return a new gate each time it is called instead of making just one for each Model. This way, if two outside nets are connected to one or zero they do not get merged (should work, but will be less clear). * Bug: In BlifParser, Model::connectSubckts(), when looking for the master net in the instances models (by name), limit the search to the *external* aliases names. * Change: In NamingScheme::vlogTovhdl(), reactivate the removal of two consecutive '_'. * Change: In cumulus/bin/blif2vst.py, prefix the master cells (i.e. components) with 'cmpt_' to avoid clash names with signals in VHDL.
2021-04-05 16:53:44 -05:00
if views & CRL.Catalog.State.VstUniquifyUpperCase:
if sviews: sviews += ', uniquify uppercase'
if views & CRL.Catalog.State.VstNoLinkage:
if sviews: sviews += ', no linkage'
sviews += ''
if views & CRL.Catalog.State.Physical:
if sviews: sviews += ','
sviews += 'layout'
print( ' {}+ {} ({}).'.format(' '*(depth*2), cell.getName(), sviews) )
if cell.isUniquified(): views |= CRL.Catalog.State.Logical
if cell.getName().endswith('_cts'): views |= CRL.Catalog.State.Logical
if cell.getName().endswith('_r' ): views |= CRL.Catalog.State.Logical
framework.saveCell( cell, views )
for instance in cell.getInstances():
#print( ' {}| {}.'.format(' '*(depth*2), instance) )
masterCell = instance.getMasterCell()
if not masterCell.isTerminalNetlist():
rsave( masterCell, views, depth+1 )
#else:
# print( ' {}| Master cell is terminal netlist {}.'.format(' '*(depth*2), instance.getMasterCell()) )
return
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
# --------------------------------------------------------------------
# Plugin hook functions, unicornHook:menus, ScritMain:call
def unicornHook ( **kw ):
"""Hook up rsave plugin into Unicorn/CGT menu tree."""
plugins.kwUnicornHook( 'tools.rsave'
, 'Recursive Save (layout)'
, 'Recursively save layout of the top cell and it\'s instances'
Bug fixes for MOSIS SCMOS_DEEP support. * Change: In Hurricane, the NetRoutingProperty is moved into Hurricane from Katabatic. Needed for Knik to be able to access thoses informations. * Change: In Hurricane, in RoutingPad::setOnBestComponent(), now in case of identical area, select the component of lowest id. This should not be needed if the component ordering was fully deterministic as it should be (will investigate later). This is to ensure that the choosen component is always the same, especially between save/load of a global routing. * Bug: In Katabatic, in AutoContactHTee::updateTopology(), invalidate the segments only if the topology is valid (no NULL in the cached segments). * Bug: In Katabatic, in GCellTopology::construct(), throw an error if the topology is bad instead of trying to continue (and core dump later... ). * Bug: In Kite, in BuildPowerRails, distinguish the name of the master net in the pad (for vddi, vssi, vdde, vsse, ck, cki & cko) and the name of the net in the *chip* netlist. Must use the later to make comparison as they may differs. * Change: In Knik, in save/load solution, exclude nets that are not globally routed by Knik. That is which NetRoutingProperty is not *Automatic*. * Bug: In Cumulus, in chip.BlockPower take account of the layer width extention to sligthy shrink the connector thus avoiding a notch with standart cell in some cases. * Change: In Cumulus, in chip.ClockTree disable the use of fixed Steiner trees for the leaf clocks, as it seems overconstrained for the router. First move was to lower them in M2/M3 (instead of M3/M4) but that was not sufficent. * New: In Cumulus, RSavePlugin for recursively saving a physical hierarchy. * New: In documentation, first embryo for RDS file. Should have been in Alliance git, but I prefer to keep newest doc in Coriolis.
2014-09-21 09:44:37 -05:00
, sys.modules[__name__].__file__
, **kw
)
return
def scriptMain ( **kw ):
"""Called when run as a stand alone script through Unicorn/CGT."""
try:
#helpers.setTraceLevel( 550 )
cell, editor = plugins.kwParseMain( **kw )
views = CRL.Catalog.State.Physical
if kw.has_key('views'): views = kw['views']
if not cell:
print( WarningMessage( 'No Cell loaded in the editor (yet), nothing done.' ) )
return 0
rsave( cell, views )
CRL.destroyAllVHDL()
except Exception, e:
helpers.io.catch( e )
sys.stdout.flush()
sys.stderr.flush()
return 0