riscv
/
coriolis
mirror of https://gitlab.lip6.fr/vlsi-eda/coriolis.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
coriolis/katana/CMakeLists.txt

45 lines
1.3 KiB
CMake
Raw Normal View History

Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
# -*- explicit-buffer-name: "CMakeLists.txt<katana>" -*-
set(CMAKE_LEGACY_CYGWIN_WIN32 0)
project(KATANA)
option(BUILD_DOC "Build the documentation (doxygen)" OFF)
option(CHECK_DATABASE "Run database in full check mode (very slow)" OFF)
Cleanup of CMake, again.
2021-10-01 12:29:29 -05:00
option(USE_LIBBFD "Link with BFD libraries to print stack traces" OFF)
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Downgrade CMake requirements to 3.16. Detects correctly Python 3. Fix courtesy of N. Shimizu.
2023-03-03 08:36:40 -06:00
cmake_minimum_required(VERSION 3.16)
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Groudwork for routing density driven placement. Compliance with clang 5.0.1. This commit contains two set of features that should have been commited separately. 1. Compliance with clang 5.0.1, tested with the RedHat collection llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS) with Xcode & macports. The bootstrap install system has been modificated accordingly. 2. The basic support for routing density driven placement. Related features are: * Bloat property. Each Occurrence of an Instance can be individually bloated. This property not attached to any tool to allow the placer and router to share it as wanted. Nevertheless, it is defined in Etesian. * BloatProfile in Katana, add individual Bloat properties to Instances occurrences based on the East & North overflowed edges of each GCell. * Support in ToolEngine for a "pass number" of a tool. This pass number is mainly used to make "per pass" measurements. The MeasureSet system is improved accordingly to support multiple values of a same measure. * Embryo of "P&R Conductor" to perform the place & route loop until the design is successfully placed. May be the first brick of a Silicon Compiler. * Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to the python component for macport (ex: python27). * Change: In boostrap/build.conf, put etesian before anabatic for instance occurrence BloatProperty dependency. Added option support for the "llvm-toolset-7" collection to build against clang 5.0.1. * Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates for first & second arguments must be called with <const T> and <const U> as the pair itself is const (and not simply <T> & <U>). * Change: In Hurricane::getSlot() temlate, only use "string" arguments and not const string&, simpler for template argument deduction. * Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<> template has a static member "_name". Clang did show that the template for this static number has to be put inside the namespace where the template *is defined* (i.e. Hurricane) instead of the namespace where it is instanciated (i.e. Analog). * Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must be put outside the C linkage back in the Isobar C++ namespace (clang). * Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification (clang). * Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change signature so it matches the one of the base class (clang). * Bug: In Hurricane::CellPrinter, use double brackets for initializer list (clang). * Change: In Hurricane::Breakpoint, reverse the meaning of the error level. Only error level *lesser or equal* than the stop level will be enabled. * Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the current working directory in the sys.path as in certain configuration it may not be included. * Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when encountering a RoutingPad on a top-level Pin Occurrence. The segment was generated in the wrong direction, creating DRC violations on the "mips_core_flat" example. * Change: In CRL::Measures, partial re-design of the measurements management. Now, each kind of measure can accept multiple values put in a vector. The index is intented to match a tool run number. * Change: In CRL::Histogram, add support for multiple sets of datas, indexeds with tool run number. * Change: In CRL::ToolEngine, add support for multiple pass number, add addMeasure<> templates for the various data-types. * Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record name constants. * New: Etesian::BloatProperty, property to attach to Instance occurrences that contains the extra number of pitch to add to the cell width. * Bug: In AutoSegment::CompareByDepthLength, the segment length comparison was wrong, it was always returning true, which broke the "strick weak ordering" of the comparison. This was producing a core-dump in GCell::updateDensity() when sorting a vector<>. The end() iterator was being dereferenced, leading to the problem. * Bug: In Katana::DataSymmetric::checkPairing(), the test for segments whose axis is perpandicular to the symmetry axis was wrong ("!=" instead of "-"). * New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells() and selectBloatedInstances() to automatically select segments from overloaded edges, overloaded GCells and bloated cells. * Change: In KatanaEngine, return a more detailed success state, distinguish between global and detailed. Add support for multiple routing iterations. * New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing driven placement.
2019-12-08 18:57:44 -06:00
set(ignoreVariables "${BUILD_DOC} ${CMAKE_INSTALL_DIR}")
Compliance with cmake 3.0 (Debian 9.2). Corrects all warnings.
2017-12-02 07:30:05 -06:00
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
list(INSERT CMAKE_MODULE_PATH 0 "${DESTDIR}$ENV{CORIOLIS_TOP}/share/cmake/Modules/")
find_package(Bootstrap REQUIRED)
setup_project_paths(CORIOLIS)
set_cmake_policies()
Migration towards Python3, first stage: still based on C-Macros. * New: Python/C++ API level: * Write a new C++/template wrapper to get rid of boost::python * The int & long Python type are now merged. So a C/C++ level, it became "PyLong_X" (remove "PyInt_X") and at Python code level, it became "int" (remove "long"). * Change: VLSISAPD finally defunct. * Configuration is now integrated as a Hurricane component, makes use of the new C++/template wrapper. * vlsisapd is now defunct. Keep it in the source for now as some remaining non essential code may have to be ported in the future. * Note: Python code (copy of the migration howto): * New print function syntax print(). * Changed "dict.has_key(k)" for "k" in dict. * Changed "except Exception, e" for "except Exception as e". * The division "/" is now the floating point division, even if both operand are integers. So 3/2 now gives 1.5 and no longer 1. The integer division is now "//" : 1 = 3//2. So have to carefully review the code to update. Most of the time we want to use "//". We must never change to float for long that, in fact, represents DbU (exposed as Python int type). * execfile() must be replaced by exec(open("file").read()). * iter().__next__() becomes iter(x).__next__(). * __getslice__() has been removed, integrated to __getitem__(). * The formating used for str(type(o)) has changed, so In Stratus, have to update them ("<class 'MyClass'>" instead of "MyClass"). * the "types" module no longer supply values for default types like str (types.StringType) or list (types.StringType). Must use "isinstance()" where they were occuring. * Remove the 'L' to indicate "long integer" (like "12L"), now all Python integer are long. * Change in bootstrap: * Ported Coriolis builder (ccb) to Python3. * Ported Coriolis socInstaller.py to Python3. * Note: In PyQt4+Python3, QVariant no longer exists. Use None or directly convert using the python syntax: bool(x), int(x), ... By default, it is a string (str). * Note: PyQt4 bindings & Python3 under SL7. * In order to compile user's must upgrade to my own rebuild of PyQt 4 & 5 bindings 4.19.21-1.el7.soc. * Bug: In cumulus/plugins.block.htree.HTree.splitNet(), set the root buffer of the H-Tree to the original signal (mainly: top clock). Strangely, it was only done when working in full chip mode.
2021-09-19 12:41:24 -05:00
setup_boost(program_options)
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
setup_qt()
Add a flag througout all the build system to manage manylinux (PyPI). * New: In boostrap/FindBootstrap.cmake, add a macro setup_qt() to share Python detection across the various tools. This macro takes into account the USE_MANYLINUX variable to slightly change the Python detection. On a "normal" system we look for "Development" (search for dynamic libraries) while under manylinux we look for "Development.Module"(static linking). * Change: In bootstrap/ccb.py, add a new option --manylinux. * Change: Cleanup in the various CMakeLists.txt to use setup_qt().
2023-07-03 12:54:01 -05:00
setup_python()
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
find_package(Libexecinfo REQUIRED)
find_package(PythonSitePackages REQUIRED)
find_package(LEFDEF REQUIRED)
Make FLUTE an independant tool in the Coriolis git repository. * Change: To allow multiple tools, and not only Knik, to link and use FLUTE, remove it from Knik and put it at top level. Bootsrap must compile this new tool and the library must be included in all CMakeLists.txt depending on Knik (and soon Anabatic).
2019-02-12 05:48:52 -06:00
find_package(FLUTE REQUIRED)
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
find_package(HURRICANE REQUIRED)
find_package(CORIOLIS REQUIRED)
find_package(ANABATIC REQUIRED)
Groudwork for routing density driven placement. Compliance with clang 5.0.1. This commit contains two set of features that should have been commited separately. 1. Compliance with clang 5.0.1, tested with the RedHat collection llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS) with Xcode & macports. The bootstrap install system has been modificated accordingly. 2. The basic support for routing density driven placement. Related features are: * Bloat property. Each Occurrence of an Instance can be individually bloated. This property not attached to any tool to allow the placer and router to share it as wanted. Nevertheless, it is defined in Etesian. * BloatProfile in Katana, add individual Bloat properties to Instances occurrences based on the East & North overflowed edges of each GCell. * Support in ToolEngine for a "pass number" of a tool. This pass number is mainly used to make "per pass" measurements. The MeasureSet system is improved accordingly to support multiple values of a same measure. * Embryo of "P&R Conductor" to perform the place & route loop until the design is successfully placed. May be the first brick of a Silicon Compiler. * Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to the python component for macport (ex: python27). * Change: In boostrap/build.conf, put etesian before anabatic for instance occurrence BloatProperty dependency. Added option support for the "llvm-toolset-7" collection to build against clang 5.0.1. * Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates for first & second arguments must be called with <const T> and <const U> as the pair itself is const (and not simply <T> & <U>). * Change: In Hurricane::getSlot() temlate, only use "string" arguments and not const string&, simpler for template argument deduction. * Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<> template has a static member "_name". Clang did show that the template for this static number has to be put inside the namespace where the template *is defined* (i.e. Hurricane) instead of the namespace where it is instanciated (i.e. Analog). * Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must be put outside the C linkage back in the Isobar C++ namespace (clang). * Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification (clang). * Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change signature so it matches the one of the base class (clang). * Bug: In Hurricane::CellPrinter, use double brackets for initializer list (clang). * Change: In Hurricane::Breakpoint, reverse the meaning of the error level. Only error level *lesser or equal* than the stop level will be enabled. * Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the current working directory in the sys.path as in certain configuration it may not be included. * Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when encountering a RoutingPad on a top-level Pin Occurrence. The segment was generated in the wrong direction, creating DRC violations on the "mips_core_flat" example. * Change: In CRL::Measures, partial re-design of the measurements management. Now, each kind of measure can accept multiple values put in a vector. The index is intented to match a tool run number. * Change: In CRL::Histogram, add support for multiple sets of datas, indexeds with tool run number. * Change: In CRL::ToolEngine, add support for multiple pass number, add addMeasure<> templates for the various data-types. * Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record name constants. * New: Etesian::BloatProperty, property to attach to Instance occurrences that contains the extra number of pitch to add to the cell width. * Bug: In AutoSegment::CompareByDepthLength, the segment length comparison was wrong, it was always returning true, which broke the "strick weak ordering" of the comparison. This was producing a core-dump in GCell::updateDensity() when sorting a vector<>. The end() iterator was being dereferenced, leading to the problem. * Bug: In Katana::DataSymmetric::checkPairing(), the test for segments whose axis is perpandicular to the symmetry axis was wrong ("!=" instead of "-"). * New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells() and selectBloatedInstances() to automatically select segments from overloaded edges, overloaded GCells and bloated cells. * Change: In KatanaEngine, return a more detailed success state, distinguish between global and detailed. Add support for multiple routing iterations. * New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing driven placement.
2019-12-08 18:57:44 -06:00
find_package(ETESIAN REQUIRED)
Fix library linking problem for gcc 9 and above (Ubuntu 20/Debian 11). * Bug: In all CMakeLists.txt, it seems I was doing a worng use of target_link_library(). No longer add dependencies to the C++ base library but instead either to the Python associated module or to the final binaries. This was inderectly causing the linking problem related to Python (which was a misdirection). * Bug: Typo in FindLibexecinfo.cmake, do not use FindLib[E]xecinfo. * Change: In CRL/ccore/CMakeLists.txt, activate SKIP_AUTOMOC on bison/flex generated files. * Bug: In viewer/PyHApplication, do not delete the C++ object in the Python destroy method.
2021-11-21 17:05:48 -06:00
find_package(COLOQUINTE REQUIRED)
Add a fully generated documentation in the git repository. * Change: In all tools supplying documentation, as we use some specific software to create the doc, they may not be available, or worse, be and incompatible version. So, by default, we install the files shipped with the git repository. To force a full doc rebuild, use the "--doc" flag of ccb.py.
2018-06-06 11:42:26 -05:00
find_package(Doxygen)
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if(CHECK_DATABASE)
add_definitions(-DCHECK_DATABASE)
endif(CHECK_DATABASE)
if(CHECK_DETERMINISM)
add_definitions(-DCHECK_DETERMINISM)
endif(CHECK_DETERMINISM)
add_subdirectory(src)
add_subdirectory(python)
add_subdirectory(cmake_modules)
Add a fully generated documentation in the git repository. * Change: In all tools supplying documentation, as we use some specific software to create the doc, they may not be available, or worse, be and incompatible version. So, by default, we install the files shipped with the git repository. To force a full doc rebuild, use the "--doc" flag of ccb.py.
2018-06-06 11:42:26 -05:00
#add_subdirectory(doc)