coriolis/katana/src/NegociateWindow.cpp

868 lines
29 KiB
C++
Raw Normal View History

Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
// -*- C++ -*-
//
// This file is part of the Coriolis Software.
// Copyright (c) UPMC 2008-2018, All Rights Reserved
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
//
// +-----------------------------------------------------------------+
// | C O R I O L I S |
// | K i t e - D e t a i l e d R o u t e r |
// | |
// | Author : Jean-Paul CHAPUT |
// | E-mail : Jean-Paul.Chaput@asim.lip6.fr |
// | =============================================================== |
// | C++ Module : "./NegociateWindow.cpp" |
// +-----------------------------------------------------------------+
#include <vector>
#include <algorithm>
#include <fstream>
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
#include <iomanip>
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
#include "hurricane/Breakpoint.h"
Synchronize priority of TrackSegments connecteds through doglegs. * Bug: In Anabatic::Dijsktra, correct the indentation in cdebug calls (lots of them causing a big shift right). * New: In Anabatic::TrackSegment, new helper structure SideStack to manage a set of aligned GCells and their various sides sizes. * Change: In Anabatic::TrackSegment::computeOptimal(), more accurate computation of attractors from global segments and variable size GCells using SideStack. * Change: In Katana::DataSymmetric::checkPairing(), increase the tolerance for misaligned symmetrics from 2 to 5 tracks (should be enough for our narrow channel routing). * New: In Katana::TrackSegment, add a first flag to enable locking of priority. If it is set, calls to either "computePriority()" or "forcePriority()" will have no effect. Added the uint32_t flags paraphernalia. * New: In ::computeNetPriority(), overall function to control the call of TrackSegment::computeAlignedPriority(). The call is done from NegociateWindow::run(). * New: Katana::TrackSegment::computeAlignedPriority(), order the TrackSegments aligneds through doglegs to the one with the highest priority is routed first and others progressively from him. Done by forcing an ever decreasing priority on the aligneds ones. The amount of decrease is small so the aligned segments got routed (ordered) in close, if not contiguous, sequence. Priority is locked for the order to remain. * Bug: In Katana::TrackSegment::computePriority(), correct computation of the priority when there is more than 10 free tracks (a DbU::toLambda() call was missing, leading to very big priorities). * Change: In katana::TrackCost CTOR, do not compute a distance to fixed in the case of analog segments, this is backfiring. Slight change of the compare function when delta differs. Seems to improve a little.
2017-05-30 15:33:06 -05:00
#include "hurricane/DebugSession.h"
#include "hurricane/UpdateSession.h"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
#include "hurricane/Warning.h"
#include "hurricane/Bug.h"
#include "hurricane/RoutingPad.h"
#include "hurricane/Net.h"
#include "hurricane/Cell.h"
#include "crlcore/Utilities.h"
#include "crlcore/AllianceFramework.h"
#include "crlcore/Measures.h"
#include "crlcore/Histogram.h"
#include "anabatic/AutoContact.h"
#include "katana/DataNegociate.h"
#include "katana/TrackElement.h"
#include "katana/TrackMarker.h"
#include "katana/TrackCost.h"
#include "katana/Track.h"
#include "katana/TrackSegment.h"
#include "katana/RoutingPlane.h"
#include "katana/RoutingEventQueue.h"
#include "katana/RoutingEventHistory.h"
#include "katana/RoutingEventLoop.h"
#include "katana/NegociateWindow.h"
#include "katana/KatanaEngine.h"
namespace {
using namespace std;
using namespace Hurricane;
using namespace CRL;
using namespace Katana;
void NegociateOverlapCost ( const TrackElement* segment, TrackCost& cost )
{
cdebug_log(9000,0) << "Deter| NegociateOverlapCost() " << segment << endl;
Interval intersect = segment->getCanonicalInterval();
if (not intersect.intersect(cost.getInterval())) return;
if (segment->isBlockage() or segment->isFixed()) {
cdebug_log(159,0) << "Infinite cost from: " << segment << endl;
cost.setInfinite ();
cost.setOverlap ();
cost.setHardOverlap();
cost.setBlockage ();
return;
}
if (cost.getInterval().getVMax() > intersect.getVMax()) cost.setLeftOverlap();
if (cost.getInterval().getVMin() < intersect.getVMin()) cost.setRightOverlap();
if (not intersect.contains(cost.getInterval()))
intersect.intersection( cost.getInterval() );
else {
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
DbU::Unit beginOverlap = cost.getInterval().getVMin() - intersect.getVMin();
DbU::Unit endOverlap = intersect.getVMax() - cost.getInterval().getVMax();
cost.setLonguestOverlap( std::min( beginOverlap, endOverlap ) );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cost.setGlobalEnclosed();
}
DataNegociate* data = segment->getDataNegociate();
if (not data) return;
TrackElement* refSegment = cost.getRefElement();
DataNegociate* refData = refSegment->getDataNegociate();
AutoSegment* refBase = refSegment->base();
AutoSegment* base = segment->base();
if (base and refBase and refData) {
if ( ( base->getRpDistance() == 0)
and (refBase->getRpDistance() > 0)
and (refData->getState() > DataNegociate::RipupPerpandiculars)
and ( data->getState() == DataNegociate::RipupPerpandiculars)
and ( data->getRipupCount() > 4)) {
cost.setAtRipupLimit();
}
if ( refSegment->isNonPref()
and segment->isUnbreakable()
and (data->getState() >= DataNegociate::Minimize)
and (data->getStateCount() >= 2) ) {
cost.setAtRipupLimit();
}
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cost.mergeRipupCount( data->getRipupCount() );
if (segment->isLocal()) {
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cost.mergeDataState( data->getState() );
if (data->getState() >= DataNegociate::LocalVsGlobal) {
cdebug_log(159,0) << "MaximumSlack/LocalVsGlobal for " << segment << endl;
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
cost.setAtRipupLimit();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
}
if (data->getState() == DataNegociate::MaximumSlack) {
cost.setAtRipupLimit();
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if (segment->isGlobal()) {
cost.setOverlapGlobal();
if ( (cost.getFlags() & TrackCost::LocalAndTopDepth)
and (data->getState() >= DataNegociate::MoveUp) ) {
cost.setInfinite ();
cost.setOverlap ();
cost.setHardOverlap();
return;
}
}
cost.setOverlap();
if ( segment->isLocal()
or (cost.isForGlobal() and (Session::getRoutingGauge()->getLayerDepth(segment->getLayer()) < 3)) ) {
cdebug_log(9000,0) << "Deter| incTerminals() " << boolalpha << cost.isForGlobal() << " " << (data->getTerminals()*100) << endl;
cost.incTerminals( data->getTerminals()*100 );
} else {
cdebug_log(9000,0) << "Deter| isForGlobal() " << boolalpha << cost.isForGlobal() << endl;
}
cdebug_log(159,0) << "| Increment Delta: " << DbU::getValueString(intersect.getSize()) << endl;
cost.incDelta( intersect.getSize() );
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
// if (segment->base()->getId() == 70433) {
// cdebug_log(159,0) << "| G:" << cost.isForGlobal()
// << " L:" << segment->isLocal()
// << " rpD:" << segment->base()->getRpDistance()
// << " state:" << data->getState()
// << " (Dogleg:" << DataNegociate::Dogleg
// << ") ripup:" << data->getRipupCount()
// << endl;
// }
if ( cost.isForGlobal()
and segment->isLocal()
and (segment->base()->getRpDistance() < 2)
and (data->getState() >= DataNegociate::Dogleg)
//and (data->getRipupCount() > Session::getConfiguration()->getRipupLimit(Configuration::LocalRipupLimit) - 2)
) {
cost.setInfinite();
cdebug_log(159,0) << "Infinite cost from (RP access)" << segment << endl;
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
void loadRoutingPads ( NegociateWindow* nw )
{
Basic support for FreePDK 45 completed. * New: In Commons, inspector support for std::pair<T,U>. * New: In Hurricane::Layer, ContactLayer & ViaLayer, support for non square VIAs. The hole (cut) remains square, but the various metal extensions can now be different in X and Y. The ::getEnclosure() method now takes a flag EnclosureH / EnclosureV. * New: In Hurricane::DbU, inspector support for: std::pair<DbU::Unit,DbU::Unit> std::array<DbU::Unit,3> Must be defined here as DbU do not exists yet in Commons.h * Bug: In Hurricane::Interval::getSize(), when the interval is "full span", do not return the difference between min and max, but directly DbU::Max. (the previous result was -1 !) * New: In CRL Core Python/Technology.py, support for non square VIAs in the configuration files. Applied to FreePDK 45. * New: In CRL::RoutingGauge, added a "symbolic" flag to tell if a gauge is for symbolic layout or not. Exported to Python. * New: In Anabatic::AutoHorizontal::updatePosition(), differentiated computation for soure or target taking account of the VIA extension in the right segment metal (due to non-square VIAs). * Change: In Anabatic::AutoHorizontal::_makeDogleg(), the dogleg is UP for HV gauges and DOWN for VH. * New: In Anabatic::AutoSegment::_initialize(), create a cache of the various extension length for each layer (viaToTop, viaToBottom, viaToSame). New implementation of getExtensionCap() using the previous cached extension table. See updatePositions(). New static functions to access the extension cache in the header: getViaTotopCap() ... * Change: In Anabatic::AutoSegment, in various update methods, updateOrient() must always be called *before* updatePositions() as extensions are dependant on source/target. * New: In Anabatic::AutoSegment::getEndAxes() compute the position of the first source and last target position (center/axes) on an *aligned* set of segments. * New: In Anabatic::AutoSegment, add a new state flag SegAxisFixed to signal segments that can be put on only one track. Specific case to VH gauge for a M1 vertical terminal with a M2 vertical segment. The M2 is effectively bound to the M1 axis position. * Bug: In Anabatic::NetBuilderVH::_do_xG_xM1_xM3(), in case of E/W global and only one RoutingPad the connexion to the RoutingPad was duplicated. It was valid, but totally stupid. * Bug: In Anabatic::Session::_canonize(), for an aligned segment set, intersect the user constraints from all segments instead of only considering the canonical one. Issue a warning about too tight constraints only for symbolic gauges. It may be correct for the real ones. * New: In Katata::DataNegociate::update(), more accurate computation of the perpandicular free interval. Use segment extension cap calculation. Create a special case for fixed axis segments allowing them to find alternative free interval, try under source and under target as they are likely to be draggable segments. * Change: In Katana::Manipulator::relax(), use the extension cap value to compute the axis of the perpandicular segemnts. * Change: In Katana::Manipulator::moveUp(), now move up the whole set of aligned segments instead of just the canonical one. * Change: In Katana::NegociateWindow::loadRoutingPads(), more accurate TrackMarkers insertions for fixed terminals. * New: In Katana::RoutingEvent::Key::Compare::operator(), segments with fixed axis are processed prior to any others. * New: In Katana::RoutingEventLoop, store segment pointers instead of ids to generate more accurate error messages. * Change: In Katana::RoutingPlane::create(), perform local track assignment only for HV gauges. * Change: In Katana::SegmentFsm::_slackenLocal(), add a "dragMinimize" step in the automaton. Mutliple states transitions can occurs in a row if an action fails. * New: In Katana::Session::_toIntervalAxis(), normalize interval bounds so they are on track positions (by shrinking the interval). * Bug: In Katana::TrackMarker CTOR, the weigh computation was wrong.
2018-02-17 13:27:38 -06:00
AllianceFramework* af = AllianceFramework::get ();
RoutingGauge* rg = nw->getKatanaEngine()->getConfiguration()->getRoutingGauge();
Improved handling of short nets (fully included in one GCell). The short net mode degrade the routing in some cases. This will be fixed in a next batch of commits. * New: In Hurricane::NetRoutingProperty, added "ShortNet" flag for Nets that are completly inside *one* GCell. * Bug: In CRL::BlifParser::Model::staticInit(), when looking for the output of zero and one cell, also skip the blockage net (as well as automatic and supplies). * New: In Anabatic::AutoSegment, added "ShortNet" flag to know if the segment is part of a short net (fully included in *one* GCell). Also add accessor/mutators for the _analogMode flag (was it ever used before?). * New: In Anabatic::NetBuilder::singleGCell(), if a RoutingPad is vertically small, add a vertical segment to give it some slack. * New: In Anabatic::Dijkstra::_materialize(), detect "short net" as they have only one GCell in their source list... * Bug: In AnabaticEngine::_loadGrbyNet(), reset the AutoSegment "short net" and "analog mode" creation flags between two different nets. * New: In Katana::Configuration, added dedicated ripup for short net segmnts. * New: In Katana: partially implemented support for "short dogleg", that is dogleg that are always kept in same metal because they connect neighboring perpandicular tracks. Not finished neither activated yet. * New: In Katana::TreckElement and derived, export the the *short net* support from AutoSegment. * Bug: In Katana::RoutingEvent::_processRepair(), when a segment is successfully inserted, re-process any perpandicular that is in repair state, as it may have a new chance to be placed. * New: In Katana::SegmentFsm::slackenTopology(), always reject short nets. * Bug: In Katana::Track::check(), correctly handle wide segments instead of issuing false check messages.
2018-07-16 04:16:51 -05:00
//bool isVH = rg->isVH();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
for( Net* net : nw->getCell()->getNets() ) {
if (net->getType() == Net::Type::POWER ) continue;
if (net->getType() == Net::Type::GROUND) continue;
if (net->getType() == Net::Type::CLOCK ) continue;
if (af->isBLOCKAGE(net->getName())) continue;
for( RoutingPad* rp : net->getRoutingPads() ) {
size_t depth = rg->getLayerDepth(rp->getLayer());
Basic support for FreePDK 45 completed. * New: In Commons, inspector support for std::pair<T,U>. * New: In Hurricane::Layer, ContactLayer & ViaLayer, support for non square VIAs. The hole (cut) remains square, but the various metal extensions can now be different in X and Y. The ::getEnclosure() method now takes a flag EnclosureH / EnclosureV. * New: In Hurricane::DbU, inspector support for: std::pair<DbU::Unit,DbU::Unit> std::array<DbU::Unit,3> Must be defined here as DbU do not exists yet in Commons.h * Bug: In Hurricane::Interval::getSize(), when the interval is "full span", do not return the difference between min and max, but directly DbU::Max. (the previous result was -1 !) * New: In CRL Core Python/Technology.py, support for non square VIAs in the configuration files. Applied to FreePDK 45. * New: In CRL::RoutingGauge, added a "symbolic" flag to tell if a gauge is for symbolic layout or not. Exported to Python. * New: In Anabatic::AutoHorizontal::updatePosition(), differentiated computation for soure or target taking account of the VIA extension in the right segment metal (due to non-square VIAs). * Change: In Anabatic::AutoHorizontal::_makeDogleg(), the dogleg is UP for HV gauges and DOWN for VH. * New: In Anabatic::AutoSegment::_initialize(), create a cache of the various extension length for each layer (viaToTop, viaToBottom, viaToSame). New implementation of getExtensionCap() using the previous cached extension table. See updatePositions(). New static functions to access the extension cache in the header: getViaTotopCap() ... * Change: In Anabatic::AutoSegment, in various update methods, updateOrient() must always be called *before* updatePositions() as extensions are dependant on source/target. * New: In Anabatic::AutoSegment::getEndAxes() compute the position of the first source and last target position (center/axes) on an *aligned* set of segments. * New: In Anabatic::AutoSegment, add a new state flag SegAxisFixed to signal segments that can be put on only one track. Specific case to VH gauge for a M1 vertical terminal with a M2 vertical segment. The M2 is effectively bound to the M1 axis position. * Bug: In Anabatic::NetBuilderVH::_do_xG_xM1_xM3(), in case of E/W global and only one RoutingPad the connexion to the RoutingPad was duplicated. It was valid, but totally stupid. * Bug: In Anabatic::Session::_canonize(), for an aligned segment set, intersect the user constraints from all segments instead of only considering the canonical one. Issue a warning about too tight constraints only for symbolic gauges. It may be correct for the real ones. * New: In Katata::DataNegociate::update(), more accurate computation of the perpandicular free interval. Use segment extension cap calculation. Create a special case for fixed axis segments allowing them to find alternative free interval, try under source and under target as they are likely to be draggable segments. * Change: In Katana::Manipulator::relax(), use the extension cap value to compute the axis of the perpandicular segemnts. * Change: In Katana::Manipulator::moveUp(), now move up the whole set of aligned segments instead of just the canonical one. * Change: In Katana::NegociateWindow::loadRoutingPads(), more accurate TrackMarkers insertions for fixed terminals. * New: In Katana::RoutingEvent::Key::Compare::operator(), segments with fixed axis are processed prior to any others. * New: In Katana::RoutingEventLoop, store segment pointers instead of ids to generate more accurate error messages. * Change: In Katana::RoutingPlane::create(), perform local track assignment only for HV gauges. * Change: In Katana::SegmentFsm::_slackenLocal(), add a "dragMinimize" step in the automaton. Mutliple states transitions can occurs in a row if an action fails. * New: In Katana::Session::_toIntervalAxis(), normalize interval bounds so they are on track positions (by shrinking the interval). * Bug: In Katana::TrackMarker CTOR, the weigh computation was wrong.
2018-02-17 13:27:38 -06:00
if (depth == 0) {
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
TrackMarker::create( rp, 1 );
Basic support for FreePDK 45 completed. * New: In Commons, inspector support for std::pair<T,U>. * New: In Hurricane::Layer, ContactLayer & ViaLayer, support for non square VIAs. The hole (cut) remains square, but the various metal extensions can now be different in X and Y. The ::getEnclosure() method now takes a flag EnclosureH / EnclosureV. * New: In Hurricane::DbU, inspector support for: std::pair<DbU::Unit,DbU::Unit> std::array<DbU::Unit,3> Must be defined here as DbU do not exists yet in Commons.h * Bug: In Hurricane::Interval::getSize(), when the interval is "full span", do not return the difference between min and max, but directly DbU::Max. (the previous result was -1 !) * New: In CRL Core Python/Technology.py, support for non square VIAs in the configuration files. Applied to FreePDK 45. * New: In CRL::RoutingGauge, added a "symbolic" flag to tell if a gauge is for symbolic layout or not. Exported to Python. * New: In Anabatic::AutoHorizontal::updatePosition(), differentiated computation for soure or target taking account of the VIA extension in the right segment metal (due to non-square VIAs). * Change: In Anabatic::AutoHorizontal::_makeDogleg(), the dogleg is UP for HV gauges and DOWN for VH. * New: In Anabatic::AutoSegment::_initialize(), create a cache of the various extension length for each layer (viaToTop, viaToBottom, viaToSame). New implementation of getExtensionCap() using the previous cached extension table. See updatePositions(). New static functions to access the extension cache in the header: getViaTotopCap() ... * Change: In Anabatic::AutoSegment, in various update methods, updateOrient() must always be called *before* updatePositions() as extensions are dependant on source/target. * New: In Anabatic::AutoSegment::getEndAxes() compute the position of the first source and last target position (center/axes) on an *aligned* set of segments. * New: In Anabatic::AutoSegment, add a new state flag SegAxisFixed to signal segments that can be put on only one track. Specific case to VH gauge for a M1 vertical terminal with a M2 vertical segment. The M2 is effectively bound to the M1 axis position. * Bug: In Anabatic::NetBuilderVH::_do_xG_xM1_xM3(), in case of E/W global and only one RoutingPad the connexion to the RoutingPad was duplicated. It was valid, but totally stupid. * Bug: In Anabatic::Session::_canonize(), for an aligned segment set, intersect the user constraints from all segments instead of only considering the canonical one. Issue a warning about too tight constraints only for symbolic gauges. It may be correct for the real ones. * New: In Katata::DataNegociate::update(), more accurate computation of the perpandicular free interval. Use segment extension cap calculation. Create a special case for fixed axis segments allowing them to find alternative free interval, try under source and under target as they are likely to be draggable segments. * Change: In Katana::Manipulator::relax(), use the extension cap value to compute the axis of the perpandicular segemnts. * Change: In Katana::Manipulator::moveUp(), now move up the whole set of aligned segments instead of just the canonical one. * Change: In Katana::NegociateWindow::loadRoutingPads(), more accurate TrackMarkers insertions for fixed terminals. * New: In Katana::RoutingEvent::Key::Compare::operator(), segments with fixed axis are processed prior to any others. * New: In Katana::RoutingEventLoop, store segment pointers instead of ids to generate more accurate error messages. * Change: In Katana::RoutingPlane::create(), perform local track assignment only for HV gauges. * Change: In Katana::SegmentFsm::_slackenLocal(), add a "dragMinimize" step in the automaton. Mutliple states transitions can occurs in a row if an action fails. * New: In Katana::Session::_toIntervalAxis(), normalize interval bounds so they are on track positions (by shrinking the interval). * Bug: In Katana::TrackMarker CTOR, the weigh computation was wrong.
2018-02-17 13:27:38 -06:00
//if (isVH) TrackMarker::create( rp, 2 );
}
if (depth == 1) {
TrackMarker::create( rp, 1 );
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
}
}
Synchronize priority of TrackSegments connecteds through doglegs. * Bug: In Anabatic::Dijsktra, correct the indentation in cdebug calls (lots of them causing a big shift right). * New: In Anabatic::TrackSegment, new helper structure SideStack to manage a set of aligned GCells and their various sides sizes. * Change: In Anabatic::TrackSegment::computeOptimal(), more accurate computation of attractors from global segments and variable size GCells using SideStack. * Change: In Katana::DataSymmetric::checkPairing(), increase the tolerance for misaligned symmetrics from 2 to 5 tracks (should be enough for our narrow channel routing). * New: In Katana::TrackSegment, add a first flag to enable locking of priority. If it is set, calls to either "computePriority()" or "forcePriority()" will have no effect. Added the uint32_t flags paraphernalia. * New: In ::computeNetPriority(), overall function to control the call of TrackSegment::computeAlignedPriority(). The call is done from NegociateWindow::run(). * New: Katana::TrackSegment::computeAlignedPriority(), order the TrackSegments aligneds through doglegs to the one with the highest priority is routed first and others progressively from him. Done by forcing an ever decreasing priority on the aligneds ones. The amount of decrease is small so the aligned segments got routed (ordered) in close, if not contiguous, sequence. Priority is locked for the order to remain. * Bug: In Katana::TrackSegment::computePriority(), correct computation of the priority when there is more than 10 free tracks (a DbU::toLambda() call was missing, leading to very big priorities). * Change: In katana::TrackCost CTOR, do not compute a distance to fixed in the case of analog segments, this is backfiring. Slight change of the compare function when delta differs. Seems to improve a little.
2017-05-30 15:33:06 -05:00
class CompareByPriority {
public:
inline bool operator() ( const TrackSegment* lhs, const TrackSegment* rhs )
{ return lhs->getPriority() > rhs->getPriority(); }
};
void computeNetPriority ( Net* net )
{
DebugSession::open( net, 159, 160 );
cdebug_log(159,1) << "::computeNetPriority() " << net << endl;
vector<TrackSegment*> segments;
for ( Segment* segment : net->getSegments() ) {
TrackSegment* canonical = dynamic_cast<TrackSegment*>( Session::lookup( segment ) );
if (canonical) segments.push_back( canonical );
}
for ( TrackSegment* segment : segments ) segment->computePriority();
sort( segments.begin(), segments.end(), CompareByPriority() );
for ( TrackSegment* segment : segments ) {
segment->computeAlignedPriority();
}
cdebug_tabw(159,-1);
DebugSession::close();
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
} // Anonymous namespace.
namespace Katana {
using std::ofstream;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using std::cerr;
using std::endl;
using std::setw;
using std::left;
using std::right;
using std::setprecision;
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
using Hurricane::Breakpoint;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using Hurricane::Warning;
using Hurricane::Bug;
using Hurricane::tab;
using Hurricane::ForEachIterator;
Synchronize priority of TrackSegments connecteds through doglegs. * Bug: In Anabatic::Dijsktra, correct the indentation in cdebug calls (lots of them causing a big shift right). * New: In Anabatic::TrackSegment, new helper structure SideStack to manage a set of aligned GCells and their various sides sizes. * Change: In Anabatic::TrackSegment::computeOptimal(), more accurate computation of attractors from global segments and variable size GCells using SideStack. * Change: In Katana::DataSymmetric::checkPairing(), increase the tolerance for misaligned symmetrics from 2 to 5 tracks (should be enough for our narrow channel routing). * New: In Katana::TrackSegment, add a first flag to enable locking of priority. If it is set, calls to either "computePriority()" or "forcePriority()" will have no effect. Added the uint32_t flags paraphernalia. * New: In ::computeNetPriority(), overall function to control the call of TrackSegment::computeAlignedPriority(). The call is done from NegociateWindow::run(). * New: Katana::TrackSegment::computeAlignedPriority(), order the TrackSegments aligneds through doglegs to the one with the highest priority is routed first and others progressively from him. Done by forcing an ever decreasing priority on the aligneds ones. The amount of decrease is small so the aligned segments got routed (ordered) in close, if not contiguous, sequence. Priority is locked for the order to remain. * Bug: In Katana::TrackSegment::computePriority(), correct computation of the priority when there is more than 10 free tracks (a DbU::toLambda() call was missing, leading to very big priorities). * Change: In katana::TrackCost CTOR, do not compute a distance to fixed in the case of analog segments, this is backfiring. Slight change of the compare function when delta differs. Seems to improve a little.
2017-05-30 15:33:06 -05:00
using Hurricane::DebugSession;
using Hurricane::UpdateSession;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using CRL::Histogram;
using CRL::addMeasure;
using Anabatic::AutoContact;
Katana manage wide wires, and they can also be symmetric. * New: In Anabatic::AutoContact and the derived classes, manages wide wires. The contact self dimension itself according to the segments it is connected to. Special case for the AutoContactTerminal which also read the size of the component it is anchored upon. New refresh method "updateSize()" and flag CntInvalidatedWidth. to compute the size. In AutoContactTerminal, compute the constraint box according to the width of the segment. * New: In Anabatic::AutoSegment, flags are now implemented as "static const" attributes of the class. The flags are stored into a uint64_t as they are more than 32. Added new flag "SegWide" and associated predicates. * Change: In GCellTopology::_doHChannel() and GCellTopology::_doVChannel(), uses the simpler overload of AutoSegment::create() in order to detect the wire width automatically. * New: In Katana::Manipulator, split insertToTrack() and forceToTrack() into a one-track method and a segment level method that iterate over the track span of the segment. * New: In Katana::SegmentFsm, for each cost in the table, now allow access to a specific track. So the base functions have now two parameters: "icost" and "itrack" (has a cost can have multiple tracks in the case of wide segments). * Change: In Katana::TrackElement, remove the index of the element inside it's track, as for a wide segment it will not be meaningful for the non-base track. This means that we have to use the Track::find() method each time instead. Remove the wide flag, as it is a duplicate of the one in AutoSegment. Added a getTrackCount() method to tell the number of track the segment is inserted into. Needed in the Track destroy step to delete a segment only when the last track that refers it is destroyed. Added getSymmetricAxis() to correct the computation of the symmetric base track in case of wide segment as the base track is not centered but the the leftmost one. * Change: In Track::insert() insert wide segments in their whole track span. * Change: In TrackCost, create an array of costs according to the segment track span. * Change: In TrackSegment::create(), now activate the factory and create wide segments. * Bug: In Katana::AutoSegments_Perpandicular, correct the debug indentation problem (ever shifting to the right).
2017-07-28 08:30:22 -05:00
using Anabatic::AutoSegment;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using Anabatic::AutoSegmentLut;
using Anabatic::perpandicularTo;
// -------------------------------------------------------------------
// Class : "NegociateWindow".
NegociateWindow::NegociateWindow ( KatanaEngine* katana )
: _flags (Flags::NoFlags)
, _interrupt (false)
, _katana (katana)
, _gcells ()
, _segments ()
, _eventQueue ()
, _eventHistory()
, _eventLoop (10,70)
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
{ }
NegociateWindow* NegociateWindow::create ( KatanaEngine* katana )
{
NegociateWindow* negociateWindow = new NegociateWindow ( katana );
return negociateWindow;
}
NegociateWindow::~NegociateWindow ()
{ }
void NegociateWindow::destroy ()
{ delete this; }
Cell* NegociateWindow::getCell () const
{ return _katana->getCell(); }
void NegociateWindow::setGCells ( const vector<GCell*>& gcells )
{
_gcells = gcells;
if (not Session::getKatanaEngine()->isChannelMode()) loadRoutingPads( this );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Session::revalidate();
for ( auto element : Session::getKatanaEngine()->_getAutoSegmentLut() ) {
TrackElement* segment = Session::lookup( element.second );
if (segment) segment->getDataNegociate()->update();
}
_statistics.setGCellsCount( _gcells.size() );
}
void NegociateWindow::addRoutingEvent ( TrackElement* segment, uint32_t level )
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
{
DataNegociate* data = segment->getDataNegociate();
if (not data or not data->hasRoutingEvent())
_eventQueue.add( segment, level );
else
cerr << Bug( "NegociateWidow::addRoutingEvent(): Try to adds twice the same TrackElement event."
"\n %p:%s."
, (void*)segment->base()->base()
, getString(segment).c_str()
) << endl;
}
TrackElement* NegociateWindow::createTrackSegment ( AutoSegment* autoSegment, Flags flags )
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
{
DebugSession::open( autoSegment->getNet(), 159, 160 );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cdebug_log(159,1) << "NegociateWindow::createTrackSegment() - " << autoSegment << endl;
RoutingPlane* plane = Session::getKatanaEngine()->getRoutingPlaneByLayer(autoSegment->getLayer());
Track* refTrack = plane->getTrackByPosition( autoSegment->getAxis() );
Track* insTrack = NULL;
size_t trackSpan = 1;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
// Special case: fixed AutoSegments must not interfere with blockages.
// Ugly: uses of getExtensionCap().
if (autoSegment->isFixed()) {
size_t begin;
size_t end;
Interval fixedSpan;
Interval blockageSpan;
if (not refTrack) {
string message = "NULL refTrack for " + getString(autoSegment);
Breakpoint::stop( 0, message );
}
if (refTrack->getAxis() != autoSegment->getAxis()) {
trackSpan = 2;
refTrack = plane->getTrackByPosition( autoSegment->getAxis(), Constant::Inferior );
insTrack = refTrack;
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Track* track = refTrack;
for ( size_t ispan=0 ; track and (ispan < trackSpan) ; ++ispan, track=track->getNextTrack() ) {
autoSegment->getCanonical( fixedSpan );
fixedSpan.inflate( Session::getExtensionCap(autoSegment->getLayer())-1 );
track->getOverlapBounds( fixedSpan, begin, end );
for ( ; (begin < end) ; begin++ ) {
TrackElement* other = track->getSegment(begin);
cdebug_log(159,0) << "| overlap: " << other << endl;
if (not other->isBlockage()) continue;
other->getCanonical( blockageSpan );
blockageSpan.inflate( Session::getExtensionCap(autoSegment->getLayer()) );
cdebug_log(159,0) << " fixed:" << fixedSpan << " vs. blockage:" << blockageSpan << endl;
if (not fixedSpan.intersect(blockageSpan)) continue;
// Overlap between fixed & blockage.
cdebug_log(159,0) << "* Blockage overlap: " << autoSegment << endl;
//Session::destroyRequest( autoSegment );
cerr << Warning( "Overlap between fixed %s and blockage at %s."
, getString(autoSegment).c_str()
, getString(blockageSpan).c_str() ) << endl;
cdebug_tabw(159,-1);
DebugSession::close();
return NULL;
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
}
Interval span;
autoSegment = autoSegment->getCanonical( span );
bool created;
TrackElement* trackSegment = TrackSegment::create( autoSegment, insTrack, created );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if (not (flags & Flags::LoadingStage))
cdebug_log(159,0) << "* lookup: " << autoSegment << endl;
if (created) {
cdebug_log(159,0) << "* " << trackSegment << endl;
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
if (trackSegment->isNonPref()) {
_segments.push_back( trackSegment );
cdebug_log(159,0) << "Non-preferred direction, do not attempt to set on track." << endl;
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
cdebug_tabw(159,-1);
DebugSession::close();
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
return trackSegment;
}
Interval uside = autoSegment->getAutoSource()->getGCell()->getSide( perpandicularTo(autoSegment->getDirection()) );
Interval constraints;
autoSegment->getConstraints( constraints );
cdebug_log(159,0) << "* Constraints " << constraints << endl;
uside.intersection( constraints );
cdebug_log(159,0) << "* Constraints+U-side " << constraints << endl;
cdebug_log(159,0) << "* Nearest " << refTrack << endl;
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (not refTrack)
Added core2chip support for Phenitec80. This commit degrades the run success rate of ARMv2a to 87% (40 iters). * New: In CRLcore/etc/.../kite.conf, add configuration parameters: katana.termSatReservedlocal katana.termSatthreshold for the new edge capacity computation system. * New: In CRLcore/etc/symbolic/phenitec06/, add support for N. Shimizu small I/O pads (supplied in phlib80). Tune various parameters of Anabatic/Katana to increase routing success. * Change: In CRLcore/alliance/ap/ApParser, make Pin external components, so RoutingPad will be build upon in global routing. Do not complain when a I/O pad has a physical instance that did not exists in the netlist. Just create it (appeared in phlib80). When no netlist instance exists in a pad, the pad Cell is still considered as terminal. * New: In Etesian::BloatCells, new profile named "3metals" better suited for two routing metals technologies (i.e. Phenitec). * New: In Anabatic::RawGCellsUnder, new CTOR which take only source & target points instead of a segment. Needed to manage wide segment for which the axis to consider is not that of the segment (one axis for each track it intersect). * New: In Anabatic::GCell, add a RoutingPad count attribute, for Edge reservation computation. * New: In AnabaticEngine::computeEdgeCapacities(), instead of decreasing all edges of a fixed amount (hTrackReservedLocal), guess the GCell cluttering from the number of RoutingPads that it contains. For non-saturated GCells, the four edges are decreased by the number of RoutingPads. We use the maximum from the two neigboring GCells. The hTrackReservedLocal parameter is now used only as a *maximum* that the edge reservation can reach. If a GCell is saturated (more than 8 RoutingPads, the saturation is propagated horizontally to 2 neigboring GCells). * Change: In AutoContactTerminal::getNativeConstraintBox(), use a more flexible gauge name matching for terminal vertical extensions correction. Namely, match all "msxlib*" kind of gauges. * Change: In AutoSegment::setAxis(), add the ability to force the axis position, even if it is a non-canonical segment. Maybe needed in the initialisation steo, before the first canonisation is performed. * New: In NetBuilder, added new methods _do_1G_1PinM1() and _do_2G_1PinM1(), to manage coronas for Phenitec designs. To avoid various side effects from segments being too close from the north / east side of the routing area, make those segments fixeds. * Change: In KatanaEngine::annotateGlobalGraph(), the management of wide wires was wrong. The axis to use to find the underlying GCells is the one of the track, not of the segment. This was creating bad edge capacity computation under the power ring of a block and subsequently routing failures. * New: In Kanata::Manipulator, added method reprocessParallels(), not used though, but keep it anyway, might be of use later... * New: In Kanata::Manipulator, added method avoidBlockage() for terminal METAL2 in non-preferred direction, restrict the terminal and turn constraint box at the current position of the perpandicular, so it doesn't create a deadlock in METAL2. * Change: In SegmentFsm::conflictSolveByPlaceds(), if we cannot break using the whole overlap, try the first atomic overlap. * New: In SegmentFsm::_slackenStrap(), manage conflict between a non-prefered segment and a blockage, this when to call avoidBlockage()... * New: In Katana::Configuration, management of the new edge computation parameters: katana.termSatReservedlocal katana.termSatthreshold * New: In Cumulus/plugins/Core2Chip, support for Phenitec I/O pads.
2019-09-17 10:05:54 -05:00
throw Error( "NegociateWindow::createTrackSegment(): No track near axis of %s."
, getString(autoSegment).c_str() );
if (not insTrack) {
insTrack = refTrack;
if (refTrack->getAxis() > uside.getVMax()) insTrack = refTrack->getPreviousTrack();
if (refTrack->getAxis() < uside.getVMin()) insTrack = refTrack->getNextTrack();
}
if (not insTrack)
Added core2chip support for Phenitec80. This commit degrades the run success rate of ARMv2a to 87% (40 iters). * New: In CRLcore/etc/.../kite.conf, add configuration parameters: katana.termSatReservedlocal katana.termSatthreshold for the new edge capacity computation system. * New: In CRLcore/etc/symbolic/phenitec06/, add support for N. Shimizu small I/O pads (supplied in phlib80). Tune various parameters of Anabatic/Katana to increase routing success. * Change: In CRLcore/alliance/ap/ApParser, make Pin external components, so RoutingPad will be build upon in global routing. Do not complain when a I/O pad has a physical instance that did not exists in the netlist. Just create it (appeared in phlib80). When no netlist instance exists in a pad, the pad Cell is still considered as terminal. * New: In Etesian::BloatCells, new profile named "3metals" better suited for two routing metals technologies (i.e. Phenitec). * New: In Anabatic::RawGCellsUnder, new CTOR which take only source & target points instead of a segment. Needed to manage wide segment for which the axis to consider is not that of the segment (one axis for each track it intersect). * New: In Anabatic::GCell, add a RoutingPad count attribute, for Edge reservation computation. * New: In AnabaticEngine::computeEdgeCapacities(), instead of decreasing all edges of a fixed amount (hTrackReservedLocal), guess the GCell cluttering from the number of RoutingPads that it contains. For non-saturated GCells, the four edges are decreased by the number of RoutingPads. We use the maximum from the two neigboring GCells. The hTrackReservedLocal parameter is now used only as a *maximum* that the edge reservation can reach. If a GCell is saturated (more than 8 RoutingPads, the saturation is propagated horizontally to 2 neigboring GCells). * Change: In AutoContactTerminal::getNativeConstraintBox(), use a more flexible gauge name matching for terminal vertical extensions correction. Namely, match all "msxlib*" kind of gauges. * Change: In AutoSegment::setAxis(), add the ability to force the axis position, even if it is a non-canonical segment. Maybe needed in the initialisation steo, before the first canonisation is performed. * New: In NetBuilder, added new methods _do_1G_1PinM1() and _do_2G_1PinM1(), to manage coronas for Phenitec designs. To avoid various side effects from segments being too close from the north / east side of the routing area, make those segments fixeds. * Change: In KatanaEngine::annotateGlobalGraph(), the management of wide wires was wrong. The axis to use to find the underlying GCells is the one of the track, not of the segment. This was creating bad edge capacity computation under the power ring of a block and subsequently routing failures. * New: In Kanata::Manipulator, added method reprocessParallels(), not used though, but keep it anyway, might be of use later... * New: In Kanata::Manipulator, added method avoidBlockage() for terminal METAL2 in non-preferred direction, restrict the terminal and turn constraint box at the current position of the perpandicular, so it doesn't create a deadlock in METAL2. * Change: In SegmentFsm::conflictSolveByPlaceds(), if we cannot break using the whole overlap, try the first atomic overlap. * New: In SegmentFsm::_slackenStrap(), manage conflict between a non-prefered segment and a blockage, this when to call avoidBlockage()... * New: In Katana::Configuration, management of the new edge computation parameters: katana.termSatReservedlocal katana.termSatthreshold * New: In Cumulus/plugins/Core2Chip, support for Phenitec I/O pads.
2019-09-17 10:05:54 -05:00
throw Error( "NegociateWindow::createTrackSegment(): No track near axis of %s (after adjust)."
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
, getString(autoSegment).c_str() );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cdebug_log(159,0) << "* GCell U-side " << uside << endl;
cdebug_log(159,0) << "* " << plane << endl;
cdebug_log(159,0) << "* " << insTrack << endl;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if (trackSpan == 1)
trackSegment->setAxis( insTrack->getAxis(), AutoSegment::SegAxisSet );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
trackSegment->invalidate();
if (trackSegment->isFixed() and not trackSegment->getTrack()) {
Session::addInsertEvent( trackSegment, insTrack, refTrack->getAxis() );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
} else {
_segments.push_back( trackSegment );
}
}
if (not created and not (flags & Flags::LoadingStage)) {
cdebug_log(159,0) << "TrackSegment already exists (and not in loading stage)." << endl;
}
cdebug_tabw(159,-1);
DebugSession::close();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
return trackSegment;
}
double NegociateWindow::computeWirelength ()
{
bool isSymbolic = getKatanaEngine()->getConfiguration()->getRoutingGauge()->isSymbolic();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
set<TrackElement*> accounteds;
double totalWL = 0.0;
for ( size_t igcell=0 ; igcell<_gcells.size() ; ++igcell ) {
double gcellWL = 0.0;
Segment* segment;
TrackElement* trackSegment;
const vector<AutoContact*>& contacts = _gcells[igcell]->getContacts();
for ( size_t i=0 ; i<contacts.size() ; i++ ) {
for( Hook* hook : contacts[i]->getBodyHook()->getSlaveHooks() ) {
Hook* sourceHook = dynamic_cast<Segment::SourceHook*>(hook);
if (not sourceHook) continue;
segment = dynamic_cast<Segment*>(sourceHook->getComponent());
trackSegment = Session::lookup( segment );
if (trackSegment) {
if (accounteds.find(trackSegment) != accounteds.end()) continue;
accounteds.insert( trackSegment );
if (isSymbolic)
gcellWL += DbU::getLambda( trackSegment->getLength() );
else
gcellWL += DbU::toPhysical( trackSegment->getLength(), DbU::UnitPower::Nano );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
}
}
// Partial sum to limit rounding errors.
totalWL += gcellWL;
}
if (not isSymbolic) totalWL /= 1000.0;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
return totalWL;
}
Synchronize priority of TrackSegments connecteds through doglegs. * Bug: In Anabatic::Dijsktra, correct the indentation in cdebug calls (lots of them causing a big shift right). * New: In Anabatic::TrackSegment, new helper structure SideStack to manage a set of aligned GCells and their various sides sizes. * Change: In Anabatic::TrackSegment::computeOptimal(), more accurate computation of attractors from global segments and variable size GCells using SideStack. * Change: In Katana::DataSymmetric::checkPairing(), increase the tolerance for misaligned symmetrics from 2 to 5 tracks (should be enough for our narrow channel routing). * New: In Katana::TrackSegment, add a first flag to enable locking of priority. If it is set, calls to either "computePriority()" or "forcePriority()" will have no effect. Added the uint32_t flags paraphernalia. * New: In ::computeNetPriority(), overall function to control the call of TrackSegment::computeAlignedPriority(). The call is done from NegociateWindow::run(). * New: Katana::TrackSegment::computeAlignedPriority(), order the TrackSegments aligneds through doglegs to the one with the highest priority is routed first and others progressively from him. Done by forcing an ever decreasing priority on the aligneds ones. The amount of decrease is small so the aligned segments got routed (ordered) in close, if not contiguous, sequence. Priority is locked for the order to remain. * Bug: In Katana::TrackSegment::computePriority(), correct computation of the priority when there is more than 10 free tracks (a DbU::toLambda() call was missing, leading to very big priorities). * Change: In katana::TrackCost CTOR, do not compute a distance to fixed in the case of analog segments, this is backfiring. Slight change of the compare function when delta differs. Seems to improve a little.
2017-05-30 15:33:06 -05:00
void NegociateWindow::_computePriorities ()
{
for ( Net* net : getCell()->getNets() ) {
if (NetRoutingExtension::isAnalog(net)) computeNetPriority( net );
}
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
void NegociateWindow::_createRouting ( Anabatic::GCell* gcell )
{
cdebug_log(159,1) << "NegociateWindow::_createRouting() - " << gcell << endl;
Segment* segment;
AutoSegment* autoSegment;
cdebug_log(159,0) << "AutoSegments from AutoContacts" << endl;
const vector<AutoContact*>& contacts = gcell->getContacts();
for ( size_t i=0 ; i<contacts.size() ; i++ ) {
for( Component* component : contacts[i]->getSlaveComponents() ) {
segment = dynamic_cast<Segment*>(component);
autoSegment = Session::base()->lookup( segment );
cdebug_log(159,0) << autoSegment << endl;
if (autoSegment and autoSegment->isCanonical()) {
createTrackSegment( autoSegment, Flags::LoadingStage );
}
}
}
cdebug_log(159,0) << "_segments.size():" << _segments.size() << endl;
cdebug_tabw(159,-1);
}
void NegociateWindow::_pack ( size_t& count, bool last )
{
uint64_t limit = _katana->getEventsLimit();
_katana->setStage( StagePack );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
RoutingEventQueue packQueue;
//for ( size_t i = (count > 600) ? count-600 : 0
// ; (i<_eventHistory.size()-(last ? 0 : 100)) and not isInterrupted() ; i++ ) {
for ( size_t i=0 ; i<_eventHistory.size() ; ++i ) {
RoutingEvent* event = _eventHistory.getNth(i);
if ( event and not event->isCloned() ) {
cerr << "Cloned:" << event->isCloned()
<< " UTurn:" << event->getSegment()->isUTurn() << " " << event->getSegment() << endl;
}
if ( event and not event->isCloned() and event->getSegment()->isUTurn() ) {
event->reschedule( packQueue, 0 );
}
}
packQueue.commit();
while ( not packQueue.empty() and not isInterrupted() ) {
RoutingEvent* event = packQueue.pop();
if (tty::enabled()) {
cmess2 << " <pack.event:" << tty::bold << setw(8) << setfill('0')
<< RoutingEvent::getProcesseds() << tty::reset
<< " remains:" << right << setw(8) << setfill('0')
<< packQueue.size() << ">"
<< setfill(' ') << tty::reset << tty::cr;
cmess2.flush();
} else {
cmess2 << " <pack.event:" << setw(8) << setfill('0')
<< RoutingEvent::getProcesseds() << setfill(' ') << " "
<< event->getEventLevel() << ":" << event->getPriority() << "> "
<< event->getSegment()
<< endl;
cmess2.flush();
}
event->process( packQueue, _eventHistory, _eventLoop );
if (RoutingEvent::getProcesseds() >= limit) setInterrupt( true );
}
// Count will be wrong!
}
size_t NegociateWindow::_negociate ()
{
cdebug_log(9000,0) << "Deter| NegociateWindow::_negociate()" << endl;
cdebug_log(159,1) << "NegociateWindow::_negociate() - " << _segments.size() << endl;
cmess1 << " o Negociation Stage." << endl;
unsigned long limit = _katana->getEventsLimit();
bool profiling = _katana->profileEventCosts();
ofstream ofprofile;
if (profiling) ofprofile.open( "katana.profile.txt" );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
_eventHistory.clear();
_eventQueue.load( _segments );
cmess2 << " <queue:" << right << setw(8) << setfill('0') << _eventQueue.size() << ">" << endl;
if (cdebug.enabled(9000)) _eventQueue.dump();
size_t count = 0;
_katana->setStage( StageNegociate );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
while ( not _eventQueue.empty() and not isInterrupted() ) {
RoutingEvent* event = _eventQueue.pop();
if (ofprofile.is_open()) {
size_t depth = _katana->getConfiguration()->getLayerDepth( event->getSegment()->getLayer() );
if (depth < 6) {
ofprofile << setw(10) << right << count << " ";
for ( size_t i=0 ; i<6 ; ++i ) {
if (i == depth)
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
ofprofile << setw(10) << right << setprecision(2) << event->getPriority() << " ";
else
ofprofile << setw(10) << right << setprecision(2) << 0.0 << " ";
}
ofprofile << setw( 2) << right << event->getEventLevel() << endl;
}
}
if (tty::enabled()) {
cmess2 << " <event:" << tty::bold << right << setw(8) << setfill('0')
<< RoutingEvent::getProcesseds() << tty::reset
<< " remains:" << right << setw(8) << setfill('0')
<< _eventQueue.size()
<< setfill(' ') << tty::reset << ">" << tty::cr;
cmess2.flush ();
} else {
cmess2 << " <event:" << right << setw(8) << setfill('0')
Improved handling of short nets (fully included in one GCell). The short net mode degrade the routing in some cases. This will be fixed in a next batch of commits. * New: In Hurricane::NetRoutingProperty, added "ShortNet" flag for Nets that are completly inside *one* GCell. * Bug: In CRL::BlifParser::Model::staticInit(), when looking for the output of zero and one cell, also skip the blockage net (as well as automatic and supplies). * New: In Anabatic::AutoSegment, added "ShortNet" flag to know if the segment is part of a short net (fully included in *one* GCell). Also add accessor/mutators for the _analogMode flag (was it ever used before?). * New: In Anabatic::NetBuilder::singleGCell(), if a RoutingPad is vertically small, add a vertical segment to give it some slack. * New: In Anabatic::Dijkstra::_materialize(), detect "short net" as they have only one GCell in their source list... * Bug: In AnabaticEngine::_loadGrbyNet(), reset the AutoSegment "short net" and "analog mode" creation flags between two different nets. * New: In Katana::Configuration, added dedicated ripup for short net segmnts. * New: In Katana: partially implemented support for "short dogleg", that is dogleg that are always kept in same metal because they connect neighboring perpandicular tracks. Not finished neither activated yet. * New: In Katana::TreckElement and derived, export the the *short net* support from AutoSegment. * Bug: In Katana::RoutingEvent::_processRepair(), when a segment is successfully inserted, re-process any perpandicular that is in repair state, as it may have a new chance to be placed. * New: In Katana::SegmentFsm::slackenTopology(), always reject short nets. * Bug: In Katana::Track::check(), correctly handle wide segments instead of issuing false check messages.
2018-07-16 04:16:51 -05:00
<< RoutingEvent::getProcesseds() << setfill(' ') << " "
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
<< event->getEventLevel() << ":" << event->getPriority()
<< ":" << DbU::getValueString(event->getSegment()->getLength()) << "> "
<< event->getSegment()
<< endl;
cmess2.flush();
}
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
//if (RoutingEvent::getProcesseds() == 14473)
// Breakpoint::stop( 0, "Before processing RoutingEvent 14473." );
Basic support for FreePDK 45 completed. * New: In Commons, inspector support for std::pair<T,U>. * New: In Hurricane::Layer, ContactLayer & ViaLayer, support for non square VIAs. The hole (cut) remains square, but the various metal extensions can now be different in X and Y. The ::getEnclosure() method now takes a flag EnclosureH / EnclosureV. * New: In Hurricane::DbU, inspector support for: std::pair<DbU::Unit,DbU::Unit> std::array<DbU::Unit,3> Must be defined here as DbU do not exists yet in Commons.h * Bug: In Hurricane::Interval::getSize(), when the interval is "full span", do not return the difference between min and max, but directly DbU::Max. (the previous result was -1 !) * New: In CRL Core Python/Technology.py, support for non square VIAs in the configuration files. Applied to FreePDK 45. * New: In CRL::RoutingGauge, added a "symbolic" flag to tell if a gauge is for symbolic layout or not. Exported to Python. * New: In Anabatic::AutoHorizontal::updatePosition(), differentiated computation for soure or target taking account of the VIA extension in the right segment metal (due to non-square VIAs). * Change: In Anabatic::AutoHorizontal::_makeDogleg(), the dogleg is UP for HV gauges and DOWN for VH. * New: In Anabatic::AutoSegment::_initialize(), create a cache of the various extension length for each layer (viaToTop, viaToBottom, viaToSame). New implementation of getExtensionCap() using the previous cached extension table. See updatePositions(). New static functions to access the extension cache in the header: getViaTotopCap() ... * Change: In Anabatic::AutoSegment, in various update methods, updateOrient() must always be called *before* updatePositions() as extensions are dependant on source/target. * New: In Anabatic::AutoSegment::getEndAxes() compute the position of the first source and last target position (center/axes) on an *aligned* set of segments. * New: In Anabatic::AutoSegment, add a new state flag SegAxisFixed to signal segments that can be put on only one track. Specific case to VH gauge for a M1 vertical terminal with a M2 vertical segment. The M2 is effectively bound to the M1 axis position. * Bug: In Anabatic::NetBuilderVH::_do_xG_xM1_xM3(), in case of E/W global and only one RoutingPad the connexion to the RoutingPad was duplicated. It was valid, but totally stupid. * Bug: In Anabatic::Session::_canonize(), for an aligned segment set, intersect the user constraints from all segments instead of only considering the canonical one. Issue a warning about too tight constraints only for symbolic gauges. It may be correct for the real ones. * New: In Katata::DataNegociate::update(), more accurate computation of the perpandicular free interval. Use segment extension cap calculation. Create a special case for fixed axis segments allowing them to find alternative free interval, try under source and under target as they are likely to be draggable segments. * Change: In Katana::Manipulator::relax(), use the extension cap value to compute the axis of the perpandicular segemnts. * Change: In Katana::Manipulator::moveUp(), now move up the whole set of aligned segments instead of just the canonical one. * Change: In Katana::NegociateWindow::loadRoutingPads(), more accurate TrackMarkers insertions for fixed terminals. * New: In Katana::RoutingEvent::Key::Compare::operator(), segments with fixed axis are processed prior to any others. * New: In Katana::RoutingEventLoop, store segment pointers instead of ids to generate more accurate error messages. * Change: In Katana::RoutingPlane::create(), perform local track assignment only for HV gauges. * Change: In Katana::SegmentFsm::_slackenLocal(), add a "dragMinimize" step in the automaton. Mutliple states transitions can occurs in a row if an action fails. * New: In Katana::Session::_toIntervalAxis(), normalize interval bounds so they are on track positions (by shrinking the interval). * Bug: In Katana::TrackMarker CTOR, the weigh computation was wrong.
2018-02-17 13:27:38 -06:00
event->process( _eventQueue, _eventHistory, _eventLoop );
count++;
// if (event->getSegment()->getNet()->getId() == 239546) {
// UpdateSession::close();
// ostringstream message;
// message << "After processing an event from Net id:239546\n" << event;
// Breakpoint::stop( 0, message.str() );
// UpdateSession::open();
// }
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
//if (count and not (count % 500)) {
// _pack( count, false );
//}
// if (RoutingEvent::getProcesseds() == 65092) {
// UpdateSession::close();
// Breakpoint::stop( 0, "Overlap has happened" );
// UpdateSession::open();
// }
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if (RoutingEvent::getProcesseds() >= limit) setInterrupt( true );
}
//_pack( count, true );
if (count and cmess2.enabled() and tty::enabled()) cmess1 << endl;
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
//if (not _katana->isChannelMode() ) {
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
cdebug_log(9000,0) << "Deter| Repair Stage" << endl;
cmess1 << " o Repair Stage." << endl;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
cdebug_log(159,0) << "Loadind Repair queue." << endl;
_katana->setStage( StageRepair );
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
for ( size_t i=0 ; (i<_eventHistory.size()) and not isInterrupted() ; i++ ) {
RoutingEvent* event = _eventHistory.getNth(i);
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (not event->isCloned() and event->isUnimplemented()) {
event->reschedule( _eventQueue, 0 );
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
_eventQueue.commit();
cmess2 << " <repair.queue:" << right << setw(8) << setfill('0')
Support for full Database clear & restart. * New: In CRL/etc/node600/phenitec, ported configuration of Phenitec 0.6um Compliant with DataBase reset. * New: In CRL/python/helpers, added function "unloadUserSettings()" to unload Python modules prior to a full reset. Added "resetCoriolis()" to perform full DataBase reset. * Change: In CRL::AllianceFramework, make it a derived class of DBo so the destroy() is now provided. * Bug: In CRL::AllianceFramework::getCell(), do not attempt any load if the library list is empty. Should never occur except in case of a botched databse reset. * New: In CRL::AllianceFramework, new method "saveCATAL()" to write back the catalog of a library and "saveCells()" to write back the cells. Note: only cells actually loaded in memory will be write back. * New: In CRL::Catalog, add method "saveToFile()" to write back the CATAL of a library. * Change: In CRL::ParserDriver, replace "const string&" by "string" (improved string support of the GNU STL). * Change: In CRL::ParserSlot, use string instead of Name. * Change: In CRL::ApParser, make _layerInformation an ordinary attribute instead of a static one. This allow for it's correct resetting across databas resets. * Change: In CRL::VstParserGrammar, reinitialize Vst::framework at each parser call. Needed to support database reset. * New: In Hurricane::DBo, add an object counter to be sure that when we perform a reset, no remaining DBo is allocated. This is different of the object id which is ever increasing. Note that, at reset, we check against "1" remaining element as at this point only Database is still allocated. Add a new "resetId()" method. MUST NEVER BE CALLED except by DataBase::_preDestroy(). * New: In Hurricane::Database, new clear() method to remove the Cells of all the libraries in reverse hierarchical depth order. Make use of the new CellsSort class. * Change: In Hurricane::DataBase::_preDestroy(), call "clear()" and DBo::resetId(). * Change: In Hurricane::Breakpoint, change the default callback to be a static function. So we can restore it later. * Bug: In Hurricane::Instance::_preDestroy(), there was yet another loop of deletion over a collection for the shared pathes. Replace it by the repetitive deletion of the first element. * Bug: In Hurricane::Net::_preDestroy(), RoutingPads must be destroyed prior to any other component. * New: In Hurricane::ColorScale, add a "qtFree()" method for freeing the Qt Brush, Pen & Color. * New: In Hurricane::DrawingStyle, add a "qtFree()" method for freeing the Qt Brush, Pen & Color. * New: In Hurricane::Graphics, add a "disable()" method to call the various "qtFree()" of the sub-objects.
2020-02-29 09:55:14 -06:00
<< _eventQueue.size() << ">" << setfill(' ') << endl;
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
count = 0;
//_eventQueue.prepareRepair();
while ( not _eventQueue.empty() and not isInterrupted() ) {
RoutingEvent* event = _eventQueue.pop();
if (tty::enabled()) {
cmess2 << " <repair.event:" << tty::bold << setw(8) << setfill('0')
<< RoutingEvent::getProcesseds() << tty::reset
<< " remains:" << right << setw(8) << setfill('0')
<< _eventQueue.size() << ">"
<< setfill(' ') << tty::reset << tty::cr;
cmess2.flush();
} else {
cmess2 << " <repair.event:" << setw(8) << setfill('0')
<< RoutingEvent::getProcesseds() << setfill(' ') << " "
<< event->getEventLevel() << ":" << event->getPriority() << "> "
<< event->getSegment()
<< endl;
cmess2.flush();
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
event->process( _eventQueue, _eventHistory, _eventLoop );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
count++;
Basic support for FreePDK 45 completed. * New: In Commons, inspector support for std::pair<T,U>. * New: In Hurricane::Layer, ContactLayer & ViaLayer, support for non square VIAs. The hole (cut) remains square, but the various metal extensions can now be different in X and Y. The ::getEnclosure() method now takes a flag EnclosureH / EnclosureV. * New: In Hurricane::DbU, inspector support for: std::pair<DbU::Unit,DbU::Unit> std::array<DbU::Unit,3> Must be defined here as DbU do not exists yet in Commons.h * Bug: In Hurricane::Interval::getSize(), when the interval is "full span", do not return the difference between min and max, but directly DbU::Max. (the previous result was -1 !) * New: In CRL Core Python/Technology.py, support for non square VIAs in the configuration files. Applied to FreePDK 45. * New: In CRL::RoutingGauge, added a "symbolic" flag to tell if a gauge is for symbolic layout or not. Exported to Python. * New: In Anabatic::AutoHorizontal::updatePosition(), differentiated computation for soure or target taking account of the VIA extension in the right segment metal (due to non-square VIAs). * Change: In Anabatic::AutoHorizontal::_makeDogleg(), the dogleg is UP for HV gauges and DOWN for VH. * New: In Anabatic::AutoSegment::_initialize(), create a cache of the various extension length for each layer (viaToTop, viaToBottom, viaToSame). New implementation of getExtensionCap() using the previous cached extension table. See updatePositions(). New static functions to access the extension cache in the header: getViaTotopCap() ... * Change: In Anabatic::AutoSegment, in various update methods, updateOrient() must always be called *before* updatePositions() as extensions are dependant on source/target. * New: In Anabatic::AutoSegment::getEndAxes() compute the position of the first source and last target position (center/axes) on an *aligned* set of segments. * New: In Anabatic::AutoSegment, add a new state flag SegAxisFixed to signal segments that can be put on only one track. Specific case to VH gauge for a M1 vertical terminal with a M2 vertical segment. The M2 is effectively bound to the M1 axis position. * Bug: In Anabatic::NetBuilderVH::_do_xG_xM1_xM3(), in case of E/W global and only one RoutingPad the connexion to the RoutingPad was duplicated. It was valid, but totally stupid. * Bug: In Anabatic::Session::_canonize(), for an aligned segment set, intersect the user constraints from all segments instead of only considering the canonical one. Issue a warning about too tight constraints only for symbolic gauges. It may be correct for the real ones. * New: In Katata::DataNegociate::update(), more accurate computation of the perpandicular free interval. Use segment extension cap calculation. Create a special case for fixed axis segments allowing them to find alternative free interval, try under source and under target as they are likely to be draggable segments. * Change: In Katana::Manipulator::relax(), use the extension cap value to compute the axis of the perpandicular segemnts. * Change: In Katana::Manipulator::moveUp(), now move up the whole set of aligned segments instead of just the canonical one. * Change: In Katana::NegociateWindow::loadRoutingPads(), more accurate TrackMarkers insertions for fixed terminals. * New: In Katana::RoutingEvent::Key::Compare::operator(), segments with fixed axis are processed prior to any others. * New: In Katana::RoutingEventLoop, store segment pointers instead of ids to generate more accurate error messages. * Change: In Katana::RoutingPlane::create(), perform local track assignment only for HV gauges. * Change: In Katana::SegmentFsm::_slackenLocal(), add a "dragMinimize" step in the automaton. Mutliple states transitions can occurs in a row if an action fails. * New: In Katana::Session::_toIntervalAxis(), normalize interval bounds so they are on track positions (by shrinking the interval). * Bug: In Katana::TrackMarker CTOR, the weigh computation was wrong.
2018-02-17 13:27:38 -06:00
if (RoutingEvent::getProcesseds() >= limit) setInterrupt( true );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
if (_katana->getConfiguration()->runRealignStage()) {
cmess1 << " o Realign Stage." << endl;
cdebug_log(159,0) << "Loadind realign queue." << endl;
_katana->setStage( StageRealign );
for ( size_t i=0 ; (i<_eventHistory.size()) and not isInterrupted() ; i++ ) {
RoutingEvent* event = _eventHistory.getNth(i);
if (not event->isCloned() and event->getSegment()->canRealign())
event->reschedule( _eventQueue, 0 );
}
_eventQueue.commit();
cmess2 << " <realign.queue:" << right << setw(8) << setfill('0')
<< _eventQueue.size() << ">" << setfill(' ') << endl;
count = 0;
while ( not _eventQueue.empty() and not isInterrupted() ) {
RoutingEvent* event = _eventQueue.pop();
if (tty::enabled()) {
cmess2 << " <realign.event:" << tty::bold << setw(8) << setfill('0')
<< RoutingEvent::getProcesseds() << tty::reset
<< " remains:" << right << setw(8) << setfill('0')
<< _eventQueue.size() << ">"
<< setfill(' ') << tty::reset << tty::cr;
cmess2.flush();
} else {
cmess2 << " <realign.event:" << setw(8) << setfill('0')
<< RoutingEvent::getProcesseds() << setfill(' ') << " "
<< event->getEventLevel() << ":" << event->getPriority() << "> "
<< event->getSegment()
<< endl;
cmess2.flush();
}
event->process( _eventQueue, _eventHistory, _eventLoop );
count++;
if (RoutingEvent::getProcesseds() >= limit) setInterrupt( true );
}
}
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (count and cmess2.enabled() and tty::enabled()) cmess1 << endl;
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
//}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
size_t eventsCount = _eventHistory.size();
_eventHistory.clear();
_eventQueue.clear();
if (RoutingEvent::getAllocateds() > 0) {
cerr << Bug( "%d events remains after clear.", RoutingEvent::getAllocateds() ) << endl;
}
if (ofprofile.is_open()) ofprofile.close();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
_statistics.setEventsCount( eventsCount );
cdebug_tabw(159,-1);
return eventsCount;
}
void NegociateWindow::run ( Flags flags )
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
{
cdebug_log(159,1) << "NegociateWindow::run()" << endl;
cmess1 << " o Running Negociate Algorithm" << endl;
TrackElement::setOverlapCostCB( NegociateOverlapCost );
RoutingEvent::resetProcesseds();
for ( size_t igcell=0 ; igcell<_gcells.size() ; ++igcell ) {
_createRouting( _gcells[igcell] );
}
Session::revalidate();
Synchronize priority of TrackSegments connecteds through doglegs. * Bug: In Anabatic::Dijsktra, correct the indentation in cdebug calls (lots of them causing a big shift right). * New: In Anabatic::TrackSegment, new helper structure SideStack to manage a set of aligned GCells and their various sides sizes. * Change: In Anabatic::TrackSegment::computeOptimal(), more accurate computation of attractors from global segments and variable size GCells using SideStack. * Change: In Katana::DataSymmetric::checkPairing(), increase the tolerance for misaligned symmetrics from 2 to 5 tracks (should be enough for our narrow channel routing). * New: In Katana::TrackSegment, add a first flag to enable locking of priority. If it is set, calls to either "computePriority()" or "forcePriority()" will have no effect. Added the uint32_t flags paraphernalia. * New: In ::computeNetPriority(), overall function to control the call of TrackSegment::computeAlignedPriority(). The call is done from NegociateWindow::run(). * New: Katana::TrackSegment::computeAlignedPriority(), order the TrackSegments aligneds through doglegs to the one with the highest priority is routed first and others progressively from him. Done by forcing an ever decreasing priority on the aligneds ones. The amount of decrease is small so the aligned segments got routed (ordered) in close, if not contiguous, sequence. Priority is locked for the order to remain. * Bug: In Katana::TrackSegment::computePriority(), correct computation of the priority when there is more than 10 free tracks (a DbU::toLambda() call was missing, leading to very big priorities). * Change: In katana::TrackCost CTOR, do not compute a distance to fixed in the case of analog segments, this is backfiring. Slight change of the compare function when delta differs. Seems to improve a little.
2017-05-30 15:33:06 -05:00
_computePriorities();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if (not (flags & Flags::PreRoutedStage)) {
_katana->preProcess();
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
_katana->_computeCagedConstraints();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Session::revalidate();
}
_katana->setMinimumWL( computeWirelength() );
#if defined(CHECK_DATABASE)
uint32_t overlaps = 0;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Session::getKatanaEngine()->_check( overlaps, "after _createRouting(GCell*)" );
#endif
if (flags & Flags::PairSymmetrics) {
_katana->pairSymmetrics();
Apaired segments building for symmetric routing (step 1). * Change: In Hurricane::BaseFlags, store flags in uint64_t instead of unsigned int because we start to need more than 32 different flags in some tools. * New: In ::getString() & ::getRecord() templates, add support for std::array<>. * Change: In CRL::ToolEngine, add support for timer (time & memory measurements) displaced from Katabatic. This way all ToolEngine can use this feature. The _postCreate() method display the memory just after ToolEngine allocation. * Change: In Etesian::EtesianEngine, make use of the ToolEngine builtin timer (remove the local one). Forgot to call the base class _postCreate() and _preDestroy(). * Change: In Anabatic::AnabaticEngine, make use of the ToolEngine builtin timer (remove the local one). * New: In Anabatic, new AutoSegments_Connecteds() collection. This Collection allows a deterministic walkthough *all* the AutoSegments connected either to source or target of one AutoSegment. * New: In Anabatic::AutoContactTerminal::isEndPoint() to check if an AutoContactTerminal is the *only one* anchored on a RoutingPad, thus being a true "end point" and not a kind of feed-through. * New: In Katana::KatanaEngine, added support for symmetric nets. Created new class DataSymmetric to store symmetric information of a net (mainly the paired AutoSegments). Added KatanaEngine::runSymmetricRouter(), for now only build the DataSymmetric informations. More to come... * Change: In Katana::GraphicKatanaEngine::_runTest(), now perform symmetric information building the non-symmetric routing.
2017-03-12 13:34:12 -05:00
Session::revalidate();
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
_flags |= flags;
_negociate();
printStatistics();
if (flags & Flags::PreRoutedStage) {
_katana->setFixedPreRouted();
}
General review & redesign of the "minimum area checking" for segments. * Change: In AutoHorizontal::setDuSource() & ::setDuTarget() (& AutoVertical), check that the requested "du" is less than a pitch (this is not an upper bound). Issue a warning if not true. * Change: In AutoSegment::revalidate(), when passing the previous span interval to expandToMinLength(), if we are in creation stage, make it empty because it has no sense yet and can lead to a lock in a too narrow span. Change the coupled behavior of expandToMinLength() vs. unexpandToMinLength(), the call to "unexpand" will be done on AutoSegments that are flagged with SegAtMinArea, instead of using the return value of "expand". This way we control across multiple revalidate() if a segment can be "unexpanded". * Bug: In AutoSegment::expandToMinLength(), not only try to shift left if we are beyoond the max bound but also to the right if we are below the min bound. the span on the target and source were miscalculated, we must add the half-minimal distance to get the span inside the Track. * Change: In AutoSegment::isMiddleStack(), rename into isNearMinArea() as we check for any *small length* set of AutoSegments and not only the one part of a middle stack. In some rare instances, two aligned segments can nevertheless be too short. * Bug: In AutoSegment::reduceDoglegLayer(), when finding a reduced segment also reset it's duSource & duTarget because it will no longer be an isolated strip of metal. * Change: In AutoHorizontal::updateOrient(), when there is a source/target swap, no need to exchange the dxSource and dxTarget extentions. * Change: In AutoHorizontal::setDuSource() & ::setDuTarget(), check for du bigger than the pitch, which should never occur and display a warning. Same modification in AutoVertical. * Change: In Track::repair(), now invalidate the shifted segments to ensure cache coherency with the TrackElement. Do not take AutoSegment in non-preferred direction into account, and especially do not try to resize them. Now, invalidate the corrected segments (see below). * Change: In KatanaEngine::finalizeLayout(), move the track repair stage from here into NegociateWidow::run(). This way we avoid the false warning about segment overlap in the data-base final check. The false warning was because the AutoSegment where shifted but not invalidated/revalidated leading to a cache incoherency in the TrackElement. Now they *are* invalidated and updated. * Bug: In Track::checkMinArea(), do not check for minimal area when a segment is overlapping a same net neighbor. To avoid false minimum area violation warnings.
2022-05-18 07:54:14 -05:00
Session::revalidate();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
General review & redesign of the "minimum area checking" for segments. * Change: In AutoHorizontal::setDuSource() & ::setDuTarget() (& AutoVertical), check that the requested "du" is less than a pitch (this is not an upper bound). Issue a warning if not true. * Change: In AutoSegment::revalidate(), when passing the previous span interval to expandToMinLength(), if we are in creation stage, make it empty because it has no sense yet and can lead to a lock in a too narrow span. Change the coupled behavior of expandToMinLength() vs. unexpandToMinLength(), the call to "unexpand" will be done on AutoSegments that are flagged with SegAtMinArea, instead of using the return value of "expand". This way we control across multiple revalidate() if a segment can be "unexpanded". * Bug: In AutoSegment::expandToMinLength(), not only try to shift left if we are beyoond the max bound but also to the right if we are below the min bound. the span on the target and source were miscalculated, we must add the half-minimal distance to get the span inside the Track. * Change: In AutoSegment::isMiddleStack(), rename into isNearMinArea() as we check for any *small length* set of AutoSegments and not only the one part of a middle stack. In some rare instances, two aligned segments can nevertheless be too short. * Bug: In AutoSegment::reduceDoglegLayer(), when finding a reduced segment also reset it's duSource & duTarget because it will no longer be an isolated strip of metal. * Change: In AutoHorizontal::updateOrient(), when there is a source/target swap, no need to exchange the dxSource and dxTarget extentions. * Change: In AutoHorizontal::setDuSource() & ::setDuTarget(), check for du bigger than the pitch, which should never occur and display a warning. Same modification in AutoVertical. * Change: In Track::repair(), now invalidate the shifted segments to ensure cache coherency with the TrackElement. Do not take AutoSegment in non-preferred direction into account, and especially do not try to resize them. Now, invalidate the corrected segments (see below). * Change: In KatanaEngine::finalizeLayout(), move the track repair stage from here into NegociateWidow::run(). This way we avoid the false warning about segment overlap in the data-base final check. The false warning was because the AutoSegment where shifted but not invalidated/revalidated leading to a cache incoherency in the TrackElement. Now they *are* invalidated and updated. * Bug: In Track::checkMinArea(), do not check for minimal area when a segment is overlapping a same net neighbor. To avoid false minimum area violation warnings.
2022-05-18 07:54:14 -05:00
for ( RoutingPlane* plane : _katana->getRoutingPlanes() ) {
for ( Track* track : plane->getTracks() )
track->repair();
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Session::revalidate();
Session::get()->isEmpty();
# if defined(CHECK_DATABASE)
_katana->_check( overlaps, "after negociation" );
# endif
cdebug_tabw(159,-1);
}
void NegociateWindow::printStatistics () const
{
cmess1 << " o Computing statistics." << endl;
cmess1 << Dots::asSizet(" - Processeds Events Total",RoutingEvent::getProcesseds()) << endl;
cmess1 << Dots::asSizet(" - Unique Events Total"
,(RoutingEvent::getProcesseds() - RoutingEvent::getCloneds())) << endl;
cmess1 << Dots::asSizet(" - # of GCells",_statistics.getGCellsCount()) << endl;
_katana->printCompletion();
Groudwork for routing density driven placement. Compliance with clang 5.0.1. This commit contains two set of features that should have been commited separately. 1. Compliance with clang 5.0.1, tested with the RedHat collection llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS) with Xcode & macports. The bootstrap install system has been modificated accordingly. 2. The basic support for routing density driven placement. Related features are: * Bloat property. Each Occurrence of an Instance can be individually bloated. This property not attached to any tool to allow the placer and router to share it as wanted. Nevertheless, it is defined in Etesian. * BloatProfile in Katana, add individual Bloat properties to Instances occurrences based on the East & North overflowed edges of each GCell. * Support in ToolEngine for a "pass number" of a tool. This pass number is mainly used to make "per pass" measurements. The MeasureSet system is improved accordingly to support multiple values of a same measure. * Embryo of "P&R Conductor" to perform the place & route loop until the design is successfully placed. May be the first brick of a Silicon Compiler. * Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to the python component for macport (ex: python27). * Change: In boostrap/build.conf, put etesian before anabatic for instance occurrence BloatProperty dependency. Added option support for the "llvm-toolset-7" collection to build against clang 5.0.1. * Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates for first & second arguments must be called with <const T> and <const U> as the pair itself is const (and not simply <T> & <U>). * Change: In Hurricane::getSlot() temlate, only use "string" arguments and not const string&, simpler for template argument deduction. * Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<> template has a static member "_name". Clang did show that the template for this static number has to be put inside the namespace where the template *is defined* (i.e. Hurricane) instead of the namespace where it is instanciated (i.e. Analog). * Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must be put outside the C linkage back in the Isobar C++ namespace (clang). * Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification (clang). * Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change signature so it matches the one of the base class (clang). * Bug: In Hurricane::CellPrinter, use double brackets for initializer list (clang). * Change: In Hurricane::Breakpoint, reverse the meaning of the error level. Only error level *lesser or equal* than the stop level will be enabled. * Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the current working directory in the sys.path as in certain configuration it may not be included. * Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when encountering a RoutingPad on a top-level Pin Occurrence. The segment was generated in the wrong direction, creating DRC violations on the "mips_core_flat" example. * Change: In CRL::Measures, partial re-design of the measurements management. Now, each kind of measure can accept multiple values put in a vector. The index is intented to match a tool run number. * Change: In CRL::Histogram, add support for multiple sets of datas, indexeds with tool run number. * Change: In CRL::ToolEngine, add support for multiple pass number, add addMeasure<> templates for the various data-types. * Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record name constants. * New: Etesian::BloatProperty, property to attach to Instance occurrences that contains the extra number of pitch to add to the cell width. * Bug: In AutoSegment::CompareByDepthLength, the segment length comparison was wrong, it was always returning true, which broke the "strick weak ordering" of the comparison. This was producing a core-dump in GCell::updateDensity() when sorting a vector<>. The end() iterator was being dereferenced, leading to the problem. * Bug: In Katana::DataSymmetric::checkPairing(), the test for segments whose axis is perpandicular to the symmetry axis was wrong ("!=" instead of "-"). * New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells() and selectBloatedInstances() to automatically select segments from overloaded edges, overloaded GCells and bloated cells. * Change: In KatanaEngine, return a more detailed success state, distinguish between global and detailed. Add support for multiple routing iterations. * New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing driven placement.
2019-12-08 18:57:44 -06:00
_katana->addMeasure<size_t>( "Events" , RoutingEvent::getProcesseds(), 12 );
_katana->addMeasure<size_t>( "UEvents", RoutingEvent::getProcesseds()-RoutingEvent::getCloneds(), 12 );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Histogram* densityHistogram = new Histogram ( 1.0, 0.1, 2 );
Groudwork for routing density driven placement. Compliance with clang 5.0.1. This commit contains two set of features that should have been commited separately. 1. Compliance with clang 5.0.1, tested with the RedHat collection llvm-toolset-7. This allow Coriolis to be compiled under Darwin (MacOS) with Xcode & macports. The bootstrap install system has been modificated accordingly. 2. The basic support for routing density driven placement. Related features are: * Bloat property. Each Occurrence of an Instance can be individually bloated. This property not attached to any tool to allow the placer and router to share it as wanted. Nevertheless, it is defined in Etesian. * BloatProfile in Katana, add individual Bloat properties to Instances occurrences based on the East & North overflowed edges of each GCell. * Support in ToolEngine for a "pass number" of a tool. This pass number is mainly used to make "per pass" measurements. The MeasureSet system is improved accordingly to support multiple values of a same measure. * Embryo of "P&R Conductor" to perform the place & route loop until the design is successfully placed. May be the first brick of a Silicon Compiler. * Change: In boostrap/FindBoostrap.cmake, in setup_boost(), added tag to the python component for macport (ex: python27). * Change: In boostrap/build.conf, put etesian before anabatic for instance occurrence BloatProperty dependency. Added option support for the "llvm-toolset-7" collection to build against clang 5.0.1. * Bug: In Hurricane::getRecord( const pair<T,U>& ), the getSlot<> templates for first & second arguments must be called with <const T> and <const U> as the pair itself is const (and not simply <T> & <U>). * Change: In Hurricane::getSlot() temlate, only use "string" arguments and not const string&, simpler for template argument deduction. * Bug: In Hurricane::AnalogCellExtension, the StandardPrivateProperty<> template has a static member "_name". Clang did show that the template for this static number has to be put inside the namespace where the template *is defined* (i.e. Hurricane) instead of the namespace where it is instanciated (i.e. Analog). * Bug: In Isobar, Matrix_FromListOfList(), PyInt_AsPlacementStatus() must be put outside the C linkage back in the Isobar C++ namespace (clang). * Bug: In Hurricane::DBo::~DBo, and derived add a throw() specification (clang). * Bug: In Hurricane::RegularLayer::getEnclosure() & setEnclosure(), change signature so it matches the one of the base class (clang). * Bug: In Hurricane::CellPrinter, use double brackets for initializer list (clang). * Change: In Hurricane::Breakpoint, reverse the meaning of the error level. Only error level *lesser or equal* than the stop level will be enabled. * Bug: In CRL/python/helpers/__init__.loadUserSettings(), must put the current working directory in the sys.path as in certain configuration it may not be included. * Bug: In CRL::ApDriver, DumpSegments(), no longer generate segments when encountering a RoutingPad on a top-level Pin Occurrence. The segment was generated in the wrong direction, creating DRC violations on the "mips_core_flat" example. * Change: In CRL::Measures, partial re-design of the measurements management. Now, each kind of measure can accept multiple values put in a vector. The index is intented to match a tool run number. * Change: In CRL::Histogram, add support for multiple sets of datas, indexeds with tool run number. * Change: In CRL::ToolEngine, add support for multiple pass number, add addMeasure<> templates for the various data-types. * Change: In CRL::gdsDriver & CRL::gdsParser(), comment out unused GDS record name constants. * New: Etesian::BloatProperty, property to attach to Instance occurrences that contains the extra number of pitch to add to the cell width. * Bug: In AutoSegment::CompareByDepthLength, the segment length comparison was wrong, it was always returning true, which broke the "strick weak ordering" of the comparison. This was producing a core-dump in GCell::updateDensity() when sorting a vector<>. The end() iterator was being dereferenced, leading to the problem. * Bug: In Katana::DataSymmetric::checkPairing(), the test for segments whose axis is perpandicular to the symmetry axis was wrong ("!=" instead of "-"). * New: In Katana/GlobalRoute, new ::selectSegments(), selectOverloadedgcells() and selectBloatedInstances() to automatically select segments from overloaded edges, overloaded GCells and bloated cells. * Change: In KatanaEngine, return a more detailed success state, distinguish between global and detailed. Add support for multiple routing iterations. * New: In cumulus/python/plugins/ConductorPlugin.py, embryo of routing driven placement.
2019-12-08 18:57:44 -06:00
_katana->addMeasure<Histogram>( "GCells Density Histogram", densityHistogram );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
densityHistogram->setFileExtension( ".density.histogram" );
densityHistogram->setMainTitle ( "GCell Densities" );
densityHistogram->setTitle ( "Avg. Density", 0 );
densityHistogram->setTitle ( "Peak Density", 1 );
densityHistogram->setColor ( "green", 0 );
densityHistogram->setColor ( "red" , 1 );
const vector<GCell*>& gcells = getKatanaEngine()->getGCells();
getKatanaEngine()->setDensityMode( Anabatic::AnabaticEngine::MaxHVDensity );
for ( size_t igcell=0 ; igcell<gcells.size() ; ++igcell ) {
densityHistogram->addSample( gcells[igcell]->getDensity(), 0 );
}
getKatanaEngine()->setDensityMode( Anabatic::AnabaticEngine::MaxDensity );
for ( size_t igcell=0 ; igcell<gcells.size() ; ++igcell ) {
densityHistogram->addSample( gcells[igcell]->getDensity(), 1 );
}
densityHistogram->normalize( 0 );
densityHistogram->normalize( 1 );
}
string NegociateWindow::_getString () const
{
ostringstream os;
os << "<" << _getTypeName() << ">";
return os.str();
}
Record* NegociateWindow::_getRecord () const
{
Record* record = new Record ( _getString() );
record->add( getSlot( "_gcells", _gcells ) );
return record;
}
} // Katana namespace.