coriolis/katana/src/GlobalRoute.cpp

307 lines
9.6 KiB
C++
Raw Normal View History

Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
// -*- mode: C++; explicit-buffer-name: "GlobalRoute.cpp<katana>" -*-
//
// This file is part of the Coriolis Software.
// Copyright (c) UPMC 2016-2018, All Rights Reserved
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
//
// +-----------------------------------------------------------------+
// | C O R I O L I S |
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
// | K i t e - D e t a i l e d R o u t e r |
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
// | |
// | Author : Jean-Paul CHAPUT |
// | E-mail : Jean-Paul.Chaput@lip6.fr |
// | =============================================================== |
// | C++ Module : "./GlobalRoute.cpp" |
// +-----------------------------------------------------------------+
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
#include "hurricane/Warning.h"
#include "hurricane/Breakpoint.h"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
#include "hurricane/Cell.h"
#include "anabatic/Dijkstra.h"
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
#include "katana/Block.h"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
#include "katana/RoutingPlane.h"
#include "katana/KatanaEngine.h"
namespace {
using std::cerr;
using std::endl;
using std::dec;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using std::setw;
using std::setfill;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using std::left;
using std::right;
using Hurricane::DbU;
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
using Hurricane::DbU;
Forgot to perform Track re-order after removing zero-length segments. * Change: In Anabatic::Autocontact, replace getMinDepth() and getMaxDepth() by getDepthSpan(). * New: In Anabatic::AutoSegment::canMoveUp(), add an optional check of low up density (Flags::CheckLowUpDensity). Allows to move up a segment if the up density is (very) low, and in this case it's more efficient than breaking it to fit in the lower layer. canMoveUp() is now able to perform the same work as canPivotUp() if *not* supplied the flag Flags::IgnoreContacts. * New: In Katana, in GlobalRouting::DigitalDistance() now take into account the cost of a VIA (currently set to 2.5). Need to known the Net currently routed in the DigitalDistance object itself. * Change: In Katana::Track::Element::canPivotUp(), now also takes a flag parameter. * Change: In Katana::Manipulator, new flag IgnoreContacts to mirror the one of Anabatic. * Change: In Katana::SegmentFsm, allocate once a Manipulator object instead of many times on the fly. In SegmentFsm::_slackenGlobal(), in the slacken state, if the up density is (very) low, bypass to move up instead of slackening. This solve better the routing of the control part of the register file. The register file having a pathological case of terminal placement: many punctual terminals aligneds in METAL2 *and* a grid of METAL2 and METAL3 blockages near below... * Bug: In Katana::Session::_revalidate(), after removing the zero-length segments, forgot to re-order the track, leading to many stranges effects as the indexes where no longer coherent in the Track.
2016-09-20 04:30:45 -05:00
using Hurricane::Net;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using Anabatic::Edge;
using Anabatic::Vertex;
class DigitalDistance {
public:
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
inline DigitalDistance ( float h, float k, float hScaling );
Forgot to perform Track re-order after removing zero-length segments. * Change: In Anabatic::Autocontact, replace getMinDepth() and getMaxDepth() by getDepthSpan(). * New: In Anabatic::AutoSegment::canMoveUp(), add an optional check of low up density (Flags::CheckLowUpDensity). Allows to move up a segment if the up density is (very) low, and in this case it's more efficient than breaking it to fit in the lower layer. canMoveUp() is now able to perform the same work as canPivotUp() if *not* supplied the flag Flags::IgnoreContacts. * New: In Katana, in GlobalRouting::DigitalDistance() now take into account the cost of a VIA (currently set to 2.5). Need to known the Net currently routed in the DigitalDistance object itself. * Change: In Katana::Track::Element::canPivotUp(), now also takes a flag parameter. * Change: In Katana::Manipulator, new flag IgnoreContacts to mirror the one of Anabatic. * Change: In Katana::SegmentFsm, allocate once a Manipulator object instead of many times on the fly. In SegmentFsm::_slackenGlobal(), in the slacken state, if the up density is (very) low, bypass to move up instead of slackening. This solve better the routing of the control part of the register file. The register file having a pathological case of terminal placement: many punctual terminals aligneds in METAL2 *and* a grid of METAL2 and METAL3 blockages near below... * Bug: In Katana::Session::_revalidate(), after removing the zero-length segments, forgot to re-order the track, leading to many stranges effects as the indexes where no longer coherent in the Track.
2016-09-20 04:30:45 -05:00
inline void setNet ( Net* );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
DbU::Unit operator() ( const Vertex* source ,const Vertex* target,const Edge* edge ) const;
private:
// For an explanation of h & k parameters, see:
// "KNIK, routeur global pour la plateforme Coriolis", p. 52.
float _h;
float _k;
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
float _hScaling;
Forgot to perform Track re-order after removing zero-length segments. * Change: In Anabatic::Autocontact, replace getMinDepth() and getMaxDepth() by getDepthSpan(). * New: In Anabatic::AutoSegment::canMoveUp(), add an optional check of low up density (Flags::CheckLowUpDensity). Allows to move up a segment if the up density is (very) low, and in this case it's more efficient than breaking it to fit in the lower layer. canMoveUp() is now able to perform the same work as canPivotUp() if *not* supplied the flag Flags::IgnoreContacts. * New: In Katana, in GlobalRouting::DigitalDistance() now take into account the cost of a VIA (currently set to 2.5). Need to known the Net currently routed in the DigitalDistance object itself. * Change: In Katana::Track::Element::canPivotUp(), now also takes a flag parameter. * Change: In Katana::Manipulator, new flag IgnoreContacts to mirror the one of Anabatic. * Change: In Katana::SegmentFsm, allocate once a Manipulator object instead of many times on the fly. In SegmentFsm::_slackenGlobal(), in the slacken state, if the up density is (very) low, bypass to move up instead of slackening. This solve better the routing of the control part of the register file. The register file having a pathological case of terminal placement: many punctual terminals aligneds in METAL2 *and* a grid of METAL2 and METAL3 blockages near below... * Bug: In Katana::Session::_revalidate(), after removing the zero-length segments, forgot to re-order the track, leading to many stranges effects as the indexes where no longer coherent in the Track.
2016-09-20 04:30:45 -05:00
Net* _net;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
};
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
inline DigitalDistance::DigitalDistance ( float h, float k, float hScaling ) : _h(h), _k(k), _hScaling(hScaling), _net(NULL) { }
Forgot to perform Track re-order after removing zero-length segments. * Change: In Anabatic::Autocontact, replace getMinDepth() and getMaxDepth() by getDepthSpan(). * New: In Anabatic::AutoSegment::canMoveUp(), add an optional check of low up density (Flags::CheckLowUpDensity). Allows to move up a segment if the up density is (very) low, and in this case it's more efficient than breaking it to fit in the lower layer. canMoveUp() is now able to perform the same work as canPivotUp() if *not* supplied the flag Flags::IgnoreContacts. * New: In Katana, in GlobalRouting::DigitalDistance() now take into account the cost of a VIA (currently set to 2.5). Need to known the Net currently routed in the DigitalDistance object itself. * Change: In Katana::Track::Element::canPivotUp(), now also takes a flag parameter. * Change: In Katana::Manipulator, new flag IgnoreContacts to mirror the one of Anabatic. * Change: In Katana::SegmentFsm, allocate once a Manipulator object instead of many times on the fly. In SegmentFsm::_slackenGlobal(), in the slacken state, if the up density is (very) low, bypass to move up instead of slackening. This solve better the routing of the control part of the register file. The register file having a pathological case of terminal placement: many punctual terminals aligneds in METAL2 *and* a grid of METAL2 and METAL3 blockages near below... * Bug: In Katana::Session::_revalidate(), after removing the zero-length segments, forgot to re-order the track, leading to many stranges effects as the indexes where no longer coherent in the Track.
2016-09-20 04:30:45 -05:00
inline void DigitalDistance::setNet ( Net* net ) { _net = net; }
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
DbU::Unit DigitalDistance::operator() ( const Vertex* source ,const Vertex* target,const Edge* edge ) const
{
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (source->getGCell()->isStdCellRow() and target->getGCell()->isStdCellRow())
return Vertex::unreachable;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
if (edge->getCapacity() <= 0) {
if (target->getGCell()->isStdCellRow()
and target->hasValidStamp() and (target->getConnexId() >= 0) )
return 0;
if (source->getGCell()->isStdCellRow()
and source->hasValidStamp() and (source->getConnexId() >= 0) )
return 0;
return Vertex::unreachable;
}
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
float congestionCost = 1.0;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
float congestion = (float)edge->getRealOccupancy() / (float)edge->getCapacity();
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (not source->getGCell()->isChannelRow() or not target->getGCell()->isChannelRow())
congestionCost += _h / (1.0 + std::exp(_k * (congestion - 1.0)));
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Forgot to perform Track re-order after removing zero-length segments. * Change: In Anabatic::Autocontact, replace getMinDepth() and getMaxDepth() by getDepthSpan(). * New: In Anabatic::AutoSegment::canMoveUp(), add an optional check of low up density (Flags::CheckLowUpDensity). Allows to move up a segment if the up density is (very) low, and in this case it's more efficient than breaking it to fit in the lower layer. canMoveUp() is now able to perform the same work as canPivotUp() if *not* supplied the flag Flags::IgnoreContacts. * New: In Katana, in GlobalRouting::DigitalDistance() now take into account the cost of a VIA (currently set to 2.5). Need to known the Net currently routed in the DigitalDistance object itself. * Change: In Katana::Track::Element::canPivotUp(), now also takes a flag parameter. * Change: In Katana::Manipulator, new flag IgnoreContacts to mirror the one of Anabatic. * Change: In Katana::SegmentFsm, allocate once a Manipulator object instead of many times on the fly. In SegmentFsm::_slackenGlobal(), in the slacken state, if the up density is (very) low, bypass to move up instead of slackening. This solve better the routing of the control part of the register file. The register file having a pathological case of terminal placement: many punctual terminals aligneds in METAL2 *and* a grid of METAL2 and METAL3 blockages near below... * Bug: In Katana::Session::_revalidate(), after removing the zero-length segments, forgot to re-order the track, leading to many stranges effects as the indexes where no longer coherent in the Track.
2016-09-20 04:30:45 -05:00
float viaCost = 0.0;
if ( source->getFrom()
and (source->getFrom()->isHorizontal() xor edge->isHorizontal())
and not source->hasGContact(_net) ) {
viaCost += 2.5;
}
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
float edgeDistance = (float)edge->getDistance();
if ( (source->getGCell()->isChannelRow() and target->getGCell()->isStdCellRow())
or (source->getGCell()->isStdCellRow() and target->getGCell()->isChannelRow()) )
edgeDistance *= 10.0;
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
float hvScaling = (edge->isHorizontal()) ? _hScaling : 1.0 ;
float distance
= (float)source->getDistance()
+ (congestionCost + viaCost + edge->getHistoricCost()) * edgeDistance * hvScaling;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
// Edge* sourceFrom = source->getFrom();
// if (sourceFrom) {
// distance += ((sourceFrom->isHorizontal() xor edge->isHorizontal()) ? 3.0 : 0.0) * (float)Edge::unity;
// }
// cdebug_log(112,0) << "cong:" << congestion
// << " ccost:" << congestionCost
// << " digitalDistance:" << DbU::getValueString((DbU::Unit)distance) << endl;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
return (distance >= (float)DbU::Max) ? Vertex::unreachable : (DbU::Unit)distance;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
void computeNextHCost ( Edge* edge, float edgeHInc )
{
float congestion = (float)edge->getRealOccupancy() / (float)edge->getCapacity();
float hCost = edge->getHistoricCost();
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
float alpha = (congestion < 1.0) ? congestion : std::exp( std::log(8)*( congestion - 1 ) );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
edge->setHistoricCost( alpha * (hCost + ((congestion < 1.0) ? 0.0 : edgeHInc) ));
cdebug_log(113,0) << edge << endl;
}
} // Anonymous namespace.
namespace Katana {
using Hurricane::Error;
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
using Hurricane::Warning;
using Hurricane::Breakpoint;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using Hurricane::Timer;
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
using Hurricane::Occurrence;
using Hurricane::Transformation;
using Hurricane::Instance;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
using Anabatic::EngineState;
using Anabatic::Dijkstra;
using Anabatic::NetData;
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
void KatanaEngine::createChannels ()
{
Cell* core = getCell();
if (isChip())
core = getChipTools().getCore()->getMasterCell();
Block* block = new Block( this, core );
block->createChannels();
_resizeMatrix();
}
void KatanaEngine::setupGlobalGraph ( uint32_t mode )
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
{
Cell* cell = getCell();
cell->flattenNets( Cell::Flags::BuildRings|Cell::Flags::WarnOnUnplacedInstances );
cell->createRoutingPadRings( Cell::Flags::BuildRings );
startMeasures();
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (isChannelMode()) createChannels();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
if (getGCells().size() == 1) {
cmess1 << " o Building regular grid..." << endl;
getSouthWestGCell()->doGrid();
} else {
cmess1 << " o Reusing existing grid." << endl;
}
cmess1 << Dots::asInt(" - GCells" ,getGCells().size()) << endl;
stopMeasures();
printMeasures( "Anabatic Grid" );
setupNetDatas();
for ( GCell* gcell : getGCells() ) {
if (not gcell->isMatrix()) continue;
for ( Edge* edge : gcell->getEdges(Flags::EastSide|Flags::NorthSide) ) {
Capacity managment by layer in Edges & GCells (plus fixes). * New: In Anabatic::EdgeCapacity, dedicated object to manage the capacities of an edge by layer. This needed now because with real technologies layers capacities differs (unlike with symbolic technologies). This object is separated to be shared between Edges with identical characteristics (direction+interval). Deletion is automatic and done through refcounting. All the already allocateds EdgeCapacity are kept into a set in the AnabaticEngine (key is (direction,interval)). * New: In Anabatic::Edge, capacities are stored in a shared EdgeCapacity object. The total capacity can be annotated (i.e. decreased). EdgeCapacity attribute is created during the materialize() call. The capacities are computed at this time. The incCapacity() function is renamed in reserveCapacity(). * New: In Anabatic::AnabaticEngine, added attribute _edgeCapacitiesLut to store the shared EdgeCapacity. Lookup/Creation of an EdgeCapacity is done through _createCapacity(). * Change: In Anabatic::Constants, rename Flags::IllimitedCapacity into Flags::InfiniteCapacity. Add Flags::NullCapacity (both for Edges). * Change: In Anabatic::GCell, implement a by depth (for layer) getCapacity(). This modification did expose a bug in the density calculation : per depth density where divided by the complete density instead of the density's depth. This was leading to greatly underestimated densities. Thoses underestimations where preventing Dijkstra and layer assignement to manage congestion correctly (in fact, it was acting as if there never was congestion). Also avoid a divide by zero (thus -NAN showing in densities). * Change: In Anabatic::GCell, rename setEdgeOccupancy() into the more accurate forceEdgesCapacities(). Note for Eric: only the first Edge on each side has it's capacity forced. What if there's more than one Edge ?
2018-02-20 17:16:50 -06:00
if (edge->isHorizontal()) edge->reserveCapacity( getHTracksReservedLocal() );
else edge->reserveCapacity( getVTracksReservedLocal() );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
}
}
void KatanaEngine::runGlobalRouter ()
{
if (getState() >= EngineState::EngineGlobalLoaded)
throw Error ("KatanaEngine::runGlobalRouter(): Global routing already done or loaded.");
openSession();
annotateGlobalGraph();
startMeasures();
cmess1 << " o Running global routing." << endl;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
float edgeHInc = getConfiguration()->getEdgeHInc();
size_t globalIterations = getConfiguration()->getGlobalIterations();;
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
openSession();
Dijkstra* dijkstra = new Dijkstra ( this );
DigitalDistance* distance =
dijkstra->setDistance( DigitalDistance( getConfiguration()->getEdgeCostH()
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
, getConfiguration()->getEdgeCostK()
, getConfiguration()->getEdgeHScaling() ));
const vector<Edge*>& ovEdges = getOvEdges();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (isChannelMode())
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
dijkstra->setSearchAreaHalo( Session::getSliceHeight()*10 );
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
size_t iteration = 0;
size_t netCount = 0;
do {
cmess2 << " [" << setfill(' ') << setw(3) << iteration << "] nets:";
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
netCount = 0;
for ( NetData* netData : getNetOrdering() ) {
if (netData->isGlobalRouted()) continue;
distance->setNet( netData->getNet() );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
dijkstra->load( netData->getNet() );
dijkstra->run();
++netCount;
}
cmess2 << left << setw(6) << netCount;
cmess2 << " ovEdges:" << setw(4) << ovEdges.size();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
for ( Edge* edge : ovEdges ) computeNextHCost( edge, edgeHInc );
Validating channel routing mode (two metals) on SNX. * New: In Hurricane::Entity, add an id counter limit and a memory size limit. The two limits are checked only when a new Entity object is created. This should help avoiding massive memory links. * New: In CRL Core, add a "crlcore.groundName" and a "crlcore.powerName" parameter to specify the name of the ground/power signals to be created if they are missing in a Cell. For Alliance libraries it would be "vss" & "vdd" (default values), but for real technologies, it is often "gnd!" & "vdd!". The Blif parser is modificated to make use of it. * Bug: In AnabaticEngine::unify(), set the resulting unified segment in the center of the GCells common side. Gcells under a segment are found by using the edge that cover the segment axis. When we have a "bend" GCell stack and the axis is wrong, they could be ommited. This was causing deleted segments to be not removed from some Edges, then core dump. * Change: In Anabatic::AutoSegment::create(), smarter choosing of the reference contact, select the fixed or terminal one instead of always the source one. * New: In Anabatic::Edge::isEnding(), new function to check if a segment going through an Edge is starting/ending in either source or target GCell of the edge (active only when running in channel mode). * New: In Anabatic::Edge::add(), a segment takes part in the occupancy only if it is not ending in either source or target (channel mode only). The occupancy due to terminal is pre-computed in Katana. * New: In Anabatic::Edge::ripup(), in channel mode, never ripup a segment which is ending in either source or target (we *have* to access this edge to connect to the terminal). * Bug: In Anabatic::GCell::hcut() and vcut(), force the update of the Edge which is on the side that will get splitted by the cut. It's capacity will be reduced to it must be updated. * Change: In Anabatic::GCell::updateGContacts() add a flag to conditionnally update horizontals or verticals only. We may require only a partial update when resizing the GCell in only one direction. This, again, related to the fact that we compute the GCells under a segment thanks to it's axis position, so we need to be very careful when modificating axis. * Change: In Katana::Block::resizeChannels(), only update GContact vertical position. Do not disturb X positions of segments. * Bug: In Katana::GlobalRoute::DigitalDistance, in channel mode, some Edges can have a zero capacity, but still be reachable if the net has a terminal in either source or target. Look for this case and return a distance of zero instead of "unreachable". This was causing the global routing not to complete in channel mode. For computing the edge distance, makes the vertical edges much more long (10 times) than the horizontal ones as the vertical capacity is very limited. Hard coded for now, should make it a parameter in the future. * Change: In KatanaEngine::annotateGlobalGraph(), decrease the capacity of edges with reserveCapacity for each terminal inside a GCell. Both north and south edges are decreased as we a terminal will block both north and south edges. As a counterpart, the Edge capacity is not decreased when the global router connect to a terminal. * Change: In Katana::RoutingEvent::revalidate(), when in repair stage, do not expand the slack for horizontal segments in channel mode. So they may not overlap the standard cell row. * Bug: In Stratus documentation, do not use the french option in babel, the documentation is in english! * New: In Documentation, added Hurricane/Python tutorial, part for drawing layout.
2018-03-16 10:20:04 -05:00
// Session::close();
// Breakpoint::stop( 1, "Before riping up overflowed edges." );
// openSession();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
netCount = 0;
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
if (iteration < globalIterations - 1) {
size_t iEdge = 0;
while ( iEdge < ovEdges.size() ) {
Edge* edge = ovEdges[iEdge];
netCount += edge->ripup();
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
if (iEdge >= ovEdges.size()) break;
if (ovEdges[iEdge] == edge) {
cerr << Error( "AnabaticEngine::globalRoute(): Unable to ripup enough segments of edge:\n"
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
" %s"
, getString(edge).c_str()
) << endl;
++iEdge;
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
}
dijkstra->setSearchAreaHalo( Session::getSliceHeight()*3 );
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cmess2 << " ripup:" << setw(4) << netCount << right;
suspendMeasures();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
cmess2 << " " << setw(10) << Timer::getStringTime (getTimer().getCombTime())
<< " " << setw( 6) << Timer::getStringMemory(getTimer().getIncrease()) << endl;
resumeMeasures();
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
++iteration;
Corrections in the Dijkstra global routing (ripup) mechanism. * Bug: In Anabatic::Dijkstra, the degree of a vertex (the number of neighbors belonging to the same net) was miscalculated. This was leading, in the materialize step to some feed-through vertexes not being broken. Leading in turn to incomplete transformation of the detailed routing. Also in _trackback(), the degree of the first vertex we were backtracking from was not incremented. * Bug: In Anabatic::Dijkstra::materialize(), systematically use GCell::breakGoThrough() on both source and target. This is needed when we are in the ripup phase as both source and target can be go-through. This was also leading to incomplete detailed routing transformation. * Change: In Anabatic::Edge::ripup(), ripup one third of the segments instead of thoses exeeding the global length threshold. This way we are sure to desaturate an edge. Needs to be further calibrated. * Change: In Aanabatic::GCell::breakGoThrough(), no longer return NULL. Return existing gcontact if any. Break if it is a go-through and create a new gcontact in last resort. Maybe rename this function. * New: In Anabatic::Configuration, new parameters: - anabatic.edgeHScaling, to adjust the length of the horizontal edges relative to the vertical ones (this is a ratio). - anabatic.globalIterations, set the maximum number of ripup passes of the global router. * New: In CRL/etc/*/kite.conf, added new parameters anabatic.edgeHScaling and anabatic.globalIterations. * New: In Katana::GlobalRoute::DigitalDistance, take into account the new edgeHScaling factor. Must be used when the capacity of V-edges differs greatly for H-edges (case of AMS 350nm c35b4 for instance). * Bug: In Katana::GlobalRoute::DigitalDistance, the historic cost is computed for an edge length of "1". Must be multiplicated by the current edge length to have any measurable effect. This bug is finally explaining why the ripup was producing the same solutions over and over, the historical cost was negligible!
2018-04-16 05:10:48 -05:00
} while ( (netCount > 0) and (iteration < globalIterations) );
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
stopMeasures();
printMeasures( "Dijkstra" );
if (not ovEdges.empty()) {
set< const Net*, Net::CompareByName > nets;
cerr << " o Global routing did not complete, overflowed edges:" << endl;
for ( size_t iEdge = 0 ; iEdge<ovEdges.size() ; ++iEdge ) {
cerr << " " << dec << setw(4) << (iEdge+1) << "| " << ovEdges[iEdge] << endl;
for ( Segment* segment : ovEdges[iEdge]->getSegments() )
nets.insert( segment->getNet() );
}
cerr << " o Conflicting nets:" << endl;
size_t count = 0;
for ( const Net* net : nets )
cerr << " " << dec << setw(4) << (++count) << "| " << net->getName() << endl;
}
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (getBlock(0)) {
getBlock(0)->resizeChannels();
_resizeMatrix();
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
delete dijkstra;
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
Session::close();
Added support for 2-Metal block routing in Anabatic & Katana. * New: In AnabaticEngine::invalidateRoutingPads() this method is a temporary workaround for a Hurricane problems. When an instance is moved, the RoutingPads that use it must be moved accordingly, but they are not invalidated so they stay in the wrong QuadTree. New method ::_resizeMatrix() to be called when the associated Cell is resized. * Bug: In AutoHorizontal::getConstraints() and AutoVertical::getConstraints(), the *target* constraints where never merged. * Change: In AutoHorizontal::getCells() and AutoVertical::getGCells(), now return a boolean to tell if it was ok (must not encounter a NULL GCell while progessing from source to target). * New: In Anabatic::Configuration and Anabatic:Session, create new methods: - getDHorizontalLayer() - getDhorizontalDepth() - getDHorizontalWidth() - getDHorizontalPitch() And so on for Vertical and Contact. They supply depth-independant informations about the H/V layers to build the initial detailed routing. The AutoSegment::create() methods have been modificated accordingly. * New: In Anabatic::GCell, add two new types "StdCellRow" and "ChannelRow" for implementing 2-Metal blocks. Rename the GCell::setXY() method in GCell::setSouthWestCorner(), move the contents of GCell::updateContactsPosition() into it and suppress it. WARNING: In case of a GCell shrink this may cause problems. But for now we only expand... New method GCell::getNetCount() to count the number of Net going though the GCell. * Change: In Anabatic::Edge, add specific support for capacity of 2-Metal routing channels. * Change: In Anabatic::Dijsktra various methods, replace the "gcell->isMatrix()" calls by "not gcell->isAnalog()". Add more check so that the methods pertaining to the analog routing (GRData) are not called in digital mode. * New: In Anabatic::Dijkstra::materialize(), add support for 2-Metal specific cases. That is, always break in case of vertical pass-through or U-turn. The global routing must always be broken in H-Channel. * New: In Anabatic::GCell & Anabatic::Edge, make use of the Session mechanism to ensure the revalidation. The "::revalidate()" method is then moved as "::materialize()" (overload of Go) and "::_invalidate()" becomes "::invalidate()" * Change: In LoadGlobalRouting, cosmetic rename of SortHkByX in SortHookByX. * New: In GCellTopology, added support for building 2-Metal topologies. * ForkStack is now an object attribute as many methods do need it. * To push segments/hook on the stack, a new method "push()" is available. Perform NULL and fromHook checking. Can also setup _southWestContact or _northEastContact if it is the "from" edge. * N/S/E/W edges are now vector as in digital channel mode there can be more than one. * Added build topological build methods: - doRp_2m_Access() RoutingPad stem access. - _do_2m_1G_1M1() North or south access. - _do_2m_2G_1M1() North AND south access. - _do_2m_xG() H-Channel routing. * New: In Anabatic::Matrix, new ::resize() function, as Cell can be resizeds. * New: In Anabatic::Vertex, new static method ::getValueString() for a friendly text rendering. * New: In Katana::DigitalDistance, support for channel routing. * Change: In KatanaEngine::digitalSetup() and KatanaEngine::runGlobalrouter(), for channel routing, calls to setupPowerRails() and protectRoutingPads() must be called after the core block has been fully dimensionned. ::runGlobalrouter() contains the code tasked with the grid creation and channel sizing. * New: In KatanaEngine: Added support for core block, for 2-Metal routing. May be expanded for over-the-cell routing in the future. Added methods : - isDigitalMode() - isAnalogMode() - isMixedMode() - isChannelMode() - getBlock() / addBlock() - setupChannelMode() - createChannel() * New: In Katana, new class Block to manage core blocks and perform channel routing. * New: In Katana::Session, new convenience method "isOpen()".
2017-08-18 16:56:23 -05:00
if (isChannelMode()) {
setupRoutingPlanes();
setupPowerRails();
protectRoutingPads();
}
Anabatic transient commit 18. Port of Kite (Katana), Yeah, Baby! Yeah! * Bug: In Hurricane, in StaticObservable::getObserver(), if the slot pointer is NULL, do not try to access the owner. Returns NULL, so the caller can be aware of the situation... * Change: In Hurricane, in BreakpointWidget & ExceptionWidget some cosmetic changes (fonts and window sizes). * Bug: In Anabatic, In AutoHorizontal::getConstraints(), take into account the constraints from the source AutoContact, as it holds the constraints transmitted by the RoutingPads and sets up by propageConstraintsFromRp(). It is likely to be a bug affecting the original Katabatic as well. * Change: In Anabatic, in RawGCellsUnder(), check that the segment is not completly oustside the cell abutment box and truncate the coordinates to the part that is inside. Use the "shrink" if we reach the east/north border. * Change: In Anabatic, in Configuration, no more decorator because we will use a true derived relationship. Katana *derives* from *Anabatic* and do not *decorate* it, so the Configuration can do the same. It also implies that we directly create a Katana engine, not an Anabatic one. * Change: In Anabatic, in Session, do not allow the opening of the Session in a standalone fashion (with a static method). Instead it must be opened using the relevant method of the Anabatic/Katana engine. This ensure we are opening the right Session type. * Change: In Anabatic, in AutoSegment_Aligneds() collection the seed segment is not part of the collection by default, but will be included if the Flags::WithSelf is set. * Change: In Configuration, all the flags value are now defined in two steps. Declared in the header and initialized in the module. This is to prevent the fact that on some cases, in relation with the Python "extern C" part modules, we need a true allocated variable. It was causing weird linking problems. A side effect is that they can no longer be used as entry is switches, have to replace them by if/else. * New: In Anabatic, new GCell::getNeighborAt() utility function. * Bug: In Anabatic, in GCell::doGrid(), tag all the GCells of the grid with the grid type... Back annote all the edges capacity (north & east) with the reserved local capacity. * New: Complete portage of Kite over Anabatic. The new engine is christened "Katana" for Kite-Analogic. When it's capabilities and performances will be on a part with Kite, it is to completly replace it (and take back the "Kite" name). Preliminary tests seems to show that, contrary to intuition (because built on a more complex/slower grid), it is even slightly faster than Kite 8-).
2016-08-15 09:30:13 -05:00
setState( EngineState::EngineGlobalLoaded );
}
} // Katana namespace.