coriolis/katana/src/TrackSegmentNonPref.cpp

179 lines
5.5 KiB
C++
Raw Normal View History

Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
// -*- C++ -*-
//
// This file is part of the Coriolis Software.
// Copyright (c) Sorbonne Universite 2019-2019, All Rights Reserved
//
// +-----------------------------------------------------------------+
// | C O R I O L I S |
// | K i t e - D e t a i l e d R o u t e r |
// | |
// | Author : Jean-Paul CHAPUT |
// | E-mail : Jean-Paul.Chaput@asim.lip6.fr |
// | =============================================================== |
// | C++ Module : "./TrackSegmentNonPref.cpp" |
// +-----------------------------------------------------------------+
#include <sstream>
#include <limits>
#include "hurricane/DebugSession.h"
#include "hurricane/Bug.h"
#include "hurricane/Warning.h"
#include "hurricane/BasicLayer.h"
#include "hurricane/Net.h"
#include "hurricane/Name.h"
#include "hurricane/RoutingPad.h"
#include "anabatic/AutoContact.h"
#include "anabatic/GCell.h"
#include "crlcore/RoutingGauge.h"
#include "katana/DataNegociate.h"
#include "katana/TrackSegmentNonPref.h"
#include "katana/Track.h"
#include "katana/RoutingPlane.h"
#include "katana/Session.h"
#include "katana/RoutingEvent.h"
#include "katana/NegociateWindow.h"
#include "katana/KatanaEngine.h"
namespace Katana {
using namespace std;
using Hurricane::tab;
using Hurricane::DebugSession;
using Hurricane::Bug;
using Hurricane::Error;
using Hurricane::BasicLayer;
using Hurricane::Net;
using Hurricane::Name;
using Hurricane::RoutingPad;
using Anabatic::AutoSegment;
using Anabatic::perpandicularTo;
// -------------------------------------------------------------------
// Class : "TrackSegmentNonPref".
TrackSegmentNonPref::TrackSegmentNonPref ( AutoSegment* segment )
: Super(segment,NULL)
, _trackSpan (0)
, _trackCount(0)
{
cdebug_log(159,1) << "CTOR TrackSegmentNonPref " << /*(void*)this << ":" <<*/ this << endl;
cdebug_log(159,0) << " over " << /*(void*)segment << ":" <<*/ segment << endl;
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
updateTrackSpan();
cdebug_tabw(159,-1);
}
void TrackSegmentNonPref::_postCreate ()
{
Super::_postCreate();
}
TrackSegmentNonPref::~TrackSegmentNonPref ()
{
}
void TrackSegmentNonPref::_preDestroy ()
{
Super::_preDestroy();
}
bool TrackSegmentNonPref::isNonPref () const { return true; }
size_t TrackSegmentNonPref::getTrackSpan () const { return _trackSpan; }
uint32_t TrackSegmentNonPref::getTrackCount () const { return _trackCount; }
void TrackSegmentNonPref::updateTrackSpan ()
{
DebugSession::open( getNet(), 150, 160 );
cdebug_log(159,1) << "TrackSegmentNonPref::updateTrackspan() " << /*(void*)this << ":" <<*/ this << endl;
Upgrade of Katana detailed router to support Arlet 6502. * Change: In Hurricane::SharedName, replace the incremental Id by a hash key. This is to ensure better deterministic properties. Between use cases, additional strings may have to be allocated, shitfing the ids. Even if hash can be duplicated, we should be able to ensure that the absolute order in map table should be preserved. Supplemental strings are inserted in a way that keep the previous order. * Change: In CRL/etc/symbolic/cmos/kite.conf, add "katabatic.routingGauge" default parameter value ("sxlib"). * Change: In CRL/etc/common/technology.conf, define minimal spacing for symbolic layers too (added for METAL4 only for now). * Change: In CRL::Histogram, extend support to dynamically sized histograms. Add a text pretty print with table and pseudo-curve. * Change: In Cumulus/plugins/ClockTreePlugin, create blockage under the block corona corners so the global router do not draw wire under them. This was creating deadlock for the detailed router. When the abutment has to be computed, directly use Etesian to do it instead of duplicating the computation in the Python plugin. * New: In Etesian, as Coloquinte seems reluctant to evenly spread the standard cells, we trick it by making them bigger during the placement stage. Furthermore, we do not not uniformely increase the size of the cells but create a "bloating profile" based on cell size, cell name or it's density of terminals. Currently only two profiles are defined, "disabled" which does nothing and "nsxlib" targeted on 4 metal layer technologies (aka AMS 350nm, c35b4). * Bug: In Knik::MatrixVertex, load the default routing gauge using the configuration parameter "katabatic.routingGauge" as the default one may not be the first registered one. * New: In AnabaticEngine::setupNetDatas(), build a dynamic historgram of the nets terminal numbers. * Bug: In Anabatic::AutoContact::Invalidate(), always invalidate the contact cache when topology is invalidated. In case of multiple invalidations, if the first did not invalidate the cache, later one that may need it where not allowed to do so. The end result was correct nonetheless, but it did generate annoying error messages. * Bug: In Anabatic::AutoContactTurn::updateTopology(), bad computation of the contact's depth when delta == 2. * Bug: In Anabatic::Gcell::getCapacity(), was always returning the west edge capacity, even for the westermost GCell, should be the east edge in that case. * New: In Anabatic::AutoSegment, introduce a new measure "distance to terminal". This is the minimal number of segments separating the current one from the nearest RoutingPad. This replace the previous "strong terminal" and "weak terminal" flags. This distance is used by Katana to sort the events, we route the segments *from* the RoutingPads *outward*. The idea being that if we cannot event connect to the RoutingPad, there is no points continuing as thoses segments are the more constraineds. This gives an order close to the simple ascending metals but with better results. * New: In Anabatic::AutoSegment, introduce a new flag "Unbreakable", disable dogleg making on those segments. mainly intended for local segments directly connecteds to RoutingPads (distance == 0). * New: In Anabatic::AutoSegment, more aggressive reducing of segments. Now the only case where a segment cannot be reduced is when it is one horizontal branch in a HTee or a vertical on a VTee. Check if, when not accounted the source & target VIAs are still connex, if so, allow reducing. * New: In Anabatic::AutoContact, new state flags CntVDogleg & CntHDogleg mainly to prevent making doglegs twice on a turn contact. This is to limit over-fragmentation. If one dogleg doesn't solve the problem, making a second one will make things worse only... * Bug: In Anabatic::Configuration::selectRpcomponent(), we were choosing the component with the *smallest* span instead of the *bigger* one. * New: In Anabatic::GCell, introduce a new flag "GoStraight" to tell that no turn go be made inside those GCells. Mainly used underneath a block corona. * New: In AnabaticEngine::layerAssign(), new GCellRps & RpsInRow to manage GCells with too many terminals. Slacken at least one RoutingPad access when there is more than 8 RoutingPad in the GCell (slacken or change a vertical METAL2 (non-preferred) into a METAL3). * Change: In Anabatic::NetBuilderHV, allow the use of terminal connection in non-preferred direction. That is, vertical METAL2 directly connected to the RoutingPad (then a horizontal METAL2). This alllows for short dogleg without clutering the METAL3 layer (critical for AMS c35b4). Done in NetBuilderHV::doRp_Access(), with a new UseNonPref flag. Perform some other tweaking on METAL1 access topologies, to also minimize METAL3 use. * New: In AnabaticEngine::computeNetConstraints(), also compute the distance to RoutingPad for segments. Set the Unbreakable flag, based on the distance and segment length (local, short global or long global). New local function "propagateDistanceFromRp()". * Change: In AnabaticEngine.h, the sorting class for NetData, SparsityOrder, is modificated so net with a degree superior to 10 are sorted first, whatever their sparsity. This is to work in tandem with GlobalRouting. * New: In Katana::TrackSegmentNonPref, introduce a class to manage segment in non-preferred routing direction. Mostly intended for small METAL2 vertical directly connected to RoutingPad. Modifications to manage this new variant all through Katana. * Change: In Katana::GlobalRoute, DigitalDistance honor the GoStraight flag of the GCell. Do not make bend inside thoses GCells. * Change: In KatanaEngine::runGlobalRouter(), high degree nets (>= 10) are routed first and whitout the global routing estimation. There should be few of them so they wont create saturations and we want them as straight as possible. Detour are for long be-points. Set the saerch halo to one GCell in the initial routing stage (before ripup). * Bug: In KatanaEngine & NegociateWindow, call _computeCagedconstraints() inside NegociateWindow::run(), as segments are inserted into tracks only at that point so we cannot make the computation earlier. * Change: In Katana::Manipulator::repackPerpandiculars(), add a flag to select whether to replace the perpandiculars *after* or *before* the current segment. * Change: In Katana::NegociateWindow::NegociateOverlapCost(), when the segment is fully enclosed inside a global, the longest overlap cost is set to the shortest global hoverhang (before or after). When the cost is for a global, set an infinite cost if the overlapping segment has a RP distance less or equal to 1 (this is an access segment). * Bug: In Katana::PowerRailsPlane::Rail::doLayout(), correct computation of the segments extension cap. * New: In Katana::QueryPowerRails::addToPowerRail(), add support for Pad. * Change: In Katana/PreProcess::protectCagedTerminals(), apply the contraints to any turn connected to the first segment of the RoutingPad so the perpandicular constraints got propagated to the perpandicular segment... * Change: In RoutingEvent, cache the "distance to RP" value. * Change: In RoutingEvent::Key::compare(), sort *first* on distance to RoutingPad, then layer depth. If both distance to RoutingPad is null, then sort on segment length. * Change: In RoutingEvent::_processRepair(), try a repack perpandicular with perpandiculars first (then with perpandicular last, then give up). * Change: In SegmentFsm::bindToTrack() and moveToTrack(), set an axis hint when creating the insertion event. * Change: In SegmentFsm::_slackenStrap(), add a step through slacken between minimize and maximum slack (wihch directly end up in unimplemented). * Change: In Session::_addInsertEvent(), add an axis parameter needed when the axis of the segment is not the one of the track (case of wide segments or non-preferred direction). * Bug: In Track::_preDestroy(), bad management of the TrackElement reference count. Destroy the segment only when reaching zero... * Bug: In Track::expandFreeIneterval(), forgotten to manage case when there is a set of overlaping segments at the "end" of the track, the EndIsTrackMax was not set. * Change: In TrackCost::Compare, increase the cost when an overlaping segment is at it's ripup limit. We should try *not* to rip it up if we can. Add a dedicated flag "AtRipupLimit". * Change: In TrackElement, add proxies for isUnbreakable(), new function updateTrackSpan(). * New: In TrackFixedSegment CTOR, when a supply wire of METAL2 or above is found, make the underlying GCells "GoStraight". * New: In TrackElement::canDogleg(GCell*), check for already done perpandicular dogleg on source/target (reject if so).
2019-07-28 16:20:00 -05:00
RoutingPlane* plane = Session::getKatanaEngine()->getRoutingPlaneByLayer(_base->getLayer());
Interval newAxisSpan ( _base->getSourcePosition(), _base->getTargetPosition() );
Track* ntrack = plane->getTrackByPosition( newAxisSpan.getVMin(), Constant::Superior );
cdebug_log(159,0) << "new Axis span: " << newAxisSpan << endl;
if (ntrack) {
cdebug_log(159,0) << "+ " << ntrack << endl;
_trackSpan = 0;
for ( ; ntrack and newAxisSpan.contains(ntrack->getAxis())
; ntrack = ntrack->getNextTrack(), _trackSpan++ ) {
cdebug_log(159,0) << "| " << ntrack << endl;
}
}
if (not _trackSpan) _trackSpan = 1;
cdebug_log(159,0) << "_trackSpan: " << _trackSpan << endl;
cdebug_tabw(159,-1);
DebugSession::close();
}
void TrackSegmentNonPref::addTrackCount ( int32_t count )
{
if (count > 0) _trackCount += count;
else {
if (-count > (int32_t)_trackCount) _trackCount = 0;
_trackCount -= -count;
}
}
void TrackSegmentNonPref::addOverlapCost ( TrackCost& cost ) const
{
uint32_t depth = Session::getRoutingGauge()->getLayerDepth(getLayer());
bool inLocalDepth = (depth < 3);
Track* track = cost.getTrack();
if (not track) return;
DbU::Unit axisCandidate = cost.getRefCandidateAxis();
cost.setFlags( (isLocal() and (depth >= 3)) ? TrackCost::LocalAndTopDepth : 0 );
cost.setFlags( (isAnalog()) ? TrackCost::Analog : 0 );
cost.setDistanceToFixed();
cost.incAxisWeight ( getDataNegociate()->getRoutingEvent()->getAxisWeight( axisCandidate ) );
cost.incDeltaPerpand( getDataNegociate()->getWiringDelta( axisCandidate ) );
cdebug_log(155,0) << "incAxisWeight:" << DbU::getValueString(axisCandidate)
<< " of " << DbU::getValueString(getDataNegociate()->getRoutingEvent()->getAxisWeight( axisCandidate ))
<< " (sum:" << DbU::getValueString(cost.getAxisWeight()) << ")"
<< endl;
for ( size_t span=0 ; (span < _trackSpan) and (track != NULL) ; ++span ) {
track->addOverlapCost( cost );
// Todo: have to choose here wether we go *next* or *previous* according
// to the symmetry kind.
track = track->getNextTrack();
cost.selectNextTrack();
}
if (isGlobal()) cost.setForGlobal();
if ( inLocalDepth and (cost.getDataState() == DataNegociate::MaximumSlack) )
cost.setInfinite();
cost.select( 0, TrackCost::NoFlags );
}
void TrackSegmentNonPref::invalidate ()
{
if (isInvalidated()) return;
Super::invalidate();
if (getTrack()) reschedule( 0 );
}
} // Katana namespace.