mirror of https://github.com/efabless/caravel.git
91 lines
2.9 KiB
Tcl
91 lines
2.9 KiB
Tcl
# SPDX-FileCopyrightText: 2020 Efabless Corporation
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
## This should be changed to point at Caravel root
|
|
set ::env(CARAVEL_ROOT) $::env(DESIGN_DIR)/../..
|
|
|
|
set ::env(DESIGN_NAME) "housekeeping"
|
|
set ::env(ROUTING_CORES) 12
|
|
set ::env(RUN_KLAYOUT) 0
|
|
set ::env(PDK) "sky130A"
|
|
|
|
set ::env(VERILOG_FILES) "$::env(CARAVEL_ROOT)/verilog/rtl/defines.v \
|
|
$::env(CARAVEL_ROOT)/verilog/rtl/housekeeping.v \
|
|
$::env(CARAVEL_ROOT)/verilog/rtl/housekeeping_spi.v"
|
|
|
|
set ::env(CLOCK_PORT) ""
|
|
set ::env(CLOCK_NET) "wb_clk_i csclk mgmt_gpio_in\[4\]"
|
|
set ::env(CLOCK_TREE_SYNTH) 1
|
|
|
|
|
|
set ::env(BASE_SDC_FILE) [glob $::env(DESIGN_DIR)/base.sdc]
|
|
|
|
## Synthesis
|
|
set ::env(NO_SYNTH_CELL_LIST) [glob $::env(DESIGN_DIR)/no_synth.list]
|
|
# set ::env(DRC_EXCLUDE_CELL_LIST) [glob $::env(DESIGN_DIR)/drc_exclude.list]
|
|
set ::env(SYNTH_STRATEGY) "AREA 0"
|
|
|
|
set ::env(SYNTH_MAX_FANOUT) 20
|
|
# set ::env(SYNTH_CAP_LOAD) "180"
|
|
set ::env(SYNTH_BUFFERING) 0
|
|
|
|
## Floorplan
|
|
set ::env(FP_SIZING) absolute
|
|
set ::env(DIE_AREA) "0 0 370.230 550.950"
|
|
|
|
set ::env(FP_PIN_ORDER_CFG) [glob $::env(DESIGN_DIR)/pin_order.cfg]
|
|
|
|
set ::env(FP_IO_MIN_DISTANCE) 2
|
|
|
|
set ::env(CELL_PAD) 0
|
|
set ::env(FP_PDN_HPITCH) 153.18
|
|
set ::env(FP_PDN_HSPACING) 74.99
|
|
set ::env(FP_PDN_HOFFSET) 16.41
|
|
|
|
## Placement
|
|
set ::env(PL_TARGET_DENSITY) 0.28
|
|
set ::env(PL_TIME_DRIVEN) 1
|
|
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 1
|
|
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 1
|
|
set ::env(PL_RESIZER_MAX_WIRE_LENGTH) 80
|
|
|
|
set ::env(PL_RESIZER_HOLD_SLACK_MARGIN) 0.02
|
|
# set ::env(PL_RESIZER_MAX_SLEW_MARGIN) "30"
|
|
# set ::env(PL_RESIZER_MAX_CAP_MARGIN) "30"
|
|
|
|
# set ::env(PL_RESIZER_HOLD_MAX_BUFFER_PERCENT) 50
|
|
# set ::env(PL_RESIZER_ALLOW_SETUP_VIOS) 1
|
|
set ::env(CLOCK_TREE_SYNTH) 1
|
|
|
|
## Routing
|
|
set ::env(GLB_ADJUSTMENT) 0.2
|
|
set ::env(GLB_OVERFLOW_ITERS) 100
|
|
set ::env(GRT_ALLOW_CONGESTION) 1
|
|
set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) 1
|
|
|
|
set ::env(GLB_RESIZER_HOLD_SLACK_MARGIN) 0.1
|
|
set ::env(GLB_RESIZER_MAX_WIRE_LENGTH) 100
|
|
# set ::env(GLB_RESIZER_MAX_SLEW_MARGIN) "30"
|
|
# set ::env(GLB_RESIZER_MAX_CAP_MARGIN) "30"
|
|
|
|
## Diode Insertion
|
|
set ::env(DIODE_INSERTION_STRATEGY) 3
|
|
set ::env(GRT_ANT_ITERS) 10
|
|
set ::env(GRT_MAX_DIODE_INS_ITERS) 10
|
|
# set ::env(USE_ARC_ANTENNA_CHECK) 0
|
|
|
|
## clock buffering
|
|
# set ::env(CTS_CLK_BUFFER_LIST) {sky130_fd_sc_hd__clkbuf_8 sky130_fd_sc_hd__clkbuf_4}
|
|
# set ::env(CTS_ROOT_BUFFER) {sky130_fd_sc_hd__clkbuf_8} |