mirror of https://github.com/efabless/caravel.git
107 lines
2.8 KiB
Tcl
107 lines
2.8 KiB
Tcl
# SPDX-FileCopyrightText: 2020 Efabless Corporation
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
set script_dir [file dirname [file normalize [info script]]]
|
|
|
|
set ::env(DESIGN_NAME) gpio_control_block
|
|
|
|
set ::env(VERILOG_FILES) "\
|
|
$script_dir/../../verilog/rtl/defines.v\
|
|
$script_dir/../../verilog/rtl/gpio_control_block.v"
|
|
|
|
|
|
set ::env(CLOCK_PORT) "serial_clock"
|
|
|
|
# This needs to be half the mgmt_core clock frequency
|
|
set ::env(CLOCK_PERIOD) "50"
|
|
|
|
set ::env(VDD_NETS) "vccd vccd1"
|
|
set ::env(GND_NETS) "vssd vssd1"
|
|
|
|
set ::env(BASE_SDC_FILE) $script_dir/base.sdc
|
|
|
|
## Synthesis
|
|
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
|
|
set ::env(SYNTH_USE_PG_PINS_DEFINES) "USE_POWER_PINS"
|
|
|
|
## Floorplan
|
|
set ::env(FP_SIZING) absolute
|
|
set ::env(DIE_AREA) "0 0 170 65"
|
|
|
|
set ::env(FP_IO_VEXTEND) 0
|
|
set ::env(FP_IO_HEXTEND) 0
|
|
set ::env(FP_IO_HLENGTH) 100
|
|
set ::env(FP_IO_VLENGTH) 4
|
|
|
|
set ::env(RIGHT_MARGIN_MULT) 262
|
|
set ::env(LEFT_MARGIN_MULT) 10
|
|
set ::env(TOP_MARGIN_MULT) 2
|
|
set ::env(BOTTOM_MARGIN_MULT) 2
|
|
|
|
set ::env(CELL_PAD) 0
|
|
|
|
## PDN
|
|
set ::env(PDN_CFG) $script_dir/pdn.tcl
|
|
set ::env(FP_PDN_AUTO_ADJUST) 0
|
|
|
|
set ::env(FP_PDN_VWIDTH) 1.6
|
|
set ::env(FP_PDN_HWIDTH) 1.6
|
|
|
|
set ::env(FP_HORIZONTAL_HALO) 2
|
|
set ::env(FP_VERTICAL_HALO) 2
|
|
|
|
set ::env(FP_PDN_HOFFSET) 1.5
|
|
set ::env(FP_PDN_VOFFSET) 9.0
|
|
|
|
set ::env(FP_PDN_HPITCH) 16.9
|
|
set ::env(FP_PDN_VPITCH) 15.5
|
|
|
|
set ::env(FP_PDN_VSPACING) 3.4
|
|
set ::env(FP_PDN_HSPACING) 3.4
|
|
|
|
## Placement
|
|
set ::env(PL_TARGET_DENSITY) 0.91
|
|
# for some reason resizer is leaving a floating net after running repair_tie_fanout command
|
|
set ::env(PL_RESZIER_REPIAR_TIE_FANOUT) 0
|
|
|
|
# mgmt_gpio_in is driven by a tristate cell
|
|
set ::env(DONT_BUFFER_PORTS) "mgmt_gpio_in"
|
|
|
|
## Routing
|
|
set ::env(GLB_RT_MINLAYER) 2
|
|
set ::env(GLB_RT_MAXLAYER) 4
|
|
set ::env(GLB_RT_ADJUSTMENT) 0.05
|
|
|
|
# Add obstructions on the areas that will lie underneath the padframe
|
|
set ::env(GLB_RT_OBS) "\
|
|
met5 67 0 170 65,
|
|
met4 67 0 170 65,
|
|
met2 120 0 170 65,
|
|
met1 120 0 170 65"
|
|
|
|
## Diode Insertion
|
|
set ::env(DIODE_INSERTION_STRATEGY) "4"
|
|
|
|
## Internal macros
|
|
set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro_placement.cfg
|
|
|
|
set ::env(VERILOG_FILES_BLACKBOX) "\
|
|
$script_dir/../../verilog/rtl/gpio_logic_high.v"
|
|
|
|
set ::env(EXTRA_LEFS) "\
|
|
$script_dir/../../lef/gpio_logic_high.lef"
|
|
|
|
set ::env(EXTRA_GDS_FILES) "\
|
|
$script_dir/../../gds/gpio_logic_high.gds" |