mirror of https://github.com/efabless/caravel.git
842200b7ec
the 26 domain (now dedicated to the housekeeping module), with 2e0... now 261... and 2f0... now 262... Although this is not strictly backwards-compatible, the addresses in defs.h have been modified so that C code remains valid with a recompile. |
||
|---|---|---|
| .. | ||
| README | ||
| memory_map.txt | ||
README
Definitions:
caravel_openframe: Version with one wrapper for user
project only.
caravel_harness: Version with wrappers for user project
area and management core.
caravel_pico: PicoRV32, as a drop-in module for caravel_harness
Harness definition:
Management SoC and User Project are both wrappers for drop-in
modules.
The harness itself contains the clocking module, DLL, user ID,
housekeeping SPI, POR, and GPIO control.
GPIO handling moved out of management SoC and into SPI. SPI
gets a wishbone interface; the management SoC talks to the SPI
through wishbone, not by taking over the 4-pin SPI interface.
(Maybe) New block like the ID has the mode at power-up for
each GPIO. Can be configured with a text file. SPI pins are
fixed for operation on startup.
On power-up, the SPI automatically configures the GPIO. Manual
load is possible from both the SPI and from the wishbone bus.
Openframe definition:
There is only one area which is the User Project, with a wrapper
to take a drop-in module.
The openframe module contains clocking, DLL, user ID, housekeeping
SPI, POR, and GPIO control. Operation is essentially the same as
the above (harness definition).
MPW-one compatibility:
Looks like the harness, but the logic analyzer and management-
protect is part of the harness and the user area wrapper matches
that for MPW-one.
MPW-two compatibility:
Looks like the harness, but the logic analyzer and management-
protect is part of the harness and the user area wrapper matches
that for MPW-two.
Caravel-pico definition:
Caravel-pico is a version of the PicoRV32 Management SoC from
MPW-two, but without the GPIO control, clocking control, DLL,
housekeeping SPI, and logic analyzer. It mainly just exports
the Wishbone bus interface to the user project area.
Pinouts for Caravel (any version)
----------------------------------------------
Power supplies:
vddio, vssio, vdda, vssa, vccd, vssd,
vdda1, vdda2, vssa1, vssa2,
vccd1, vccd2, vssd1, vssd2
Management SoC signals:
debug (or JTAG, management)
gpio
clock
resetb
flash_csb
flash_clk
flash_io0
flash_io1
User area signals:
mprj_io[37:0]
User project area pinout (openframe)
----------------------------------------------
Power supplies:
vddio, vssio, vdda, vssa, vccd, vssd,
vdda1, vdda2, vssa1, vssa2,
vccd1, vccd2, vssd1, vssd2
Wishbone bus (exported to SPI):
wb_clk_i
wb_rst_i
wbs_stb_i
wbs_cyc_i
wbs_we_i
wbs_sel_i[3:0]
wbs_dat_i[31:0]
wbs_adr_i[31:0]
wbs_ack_o
wbs_dat_o[31:0]
GPIO:
io_in[37:0]
io_out[37:0]
io_oeb[37:0]
GPIO (single):
gpio_out
gpio_in
gpio_oeb
gpio_ieb
Flash controller:
flash_clk
flash_clk_oeb
flash_csb
flash_csb_oeb
flash_io0_do
flash_io1_do
flash_io2_do
flash_io3_do
flash_io0_di
flash_io1_di
flash_io2_di
flash_io3_di
flash_io0_oeb
flash_io1_oeb
flash_io2_oeb
flash_io3_oeb
flash_io0_ieb
flash_io1_ieb
flash_io2_ieb
flash_io3_ieb
Essentials:
resetb
core_clk
Miscellaneous:
user_clock2
user_irq[2:0]
User project area pinout (harness)
----------------------------------------------
Power supplies:
vdda1, vdda2, vssa1, vssa2,
vccd1, vccd2, vssd1, vssd2
Wishbone bus:
wb_clk_i
wb_rst_i
wbs_stb_i
wbs_cyc_i
wbs_we_i
wbs_sel_i[3:0]
wbs_dat_i[31:0]
wbs_adr_i[31:0]
wbs_ack_o
wbs_dat_o[31:0]
GPIO:
io_in[37:0]
io_out[37:0]
io_oeb[37:0]
Miscellaneous:
user_clock2
user_irq[2:0]
Management SoC pinout
----------------------------------------------
GPIO:
gpio_out
gpio_in
gpio_oeb
gpio_ieb
Flash controller:
flash_clk
flash_csb
flash_io0_do
flash_io1_do
flash_io2_do
flash_io3_do
flash_io0_di
flash_io1_di
flash_io2_di
flash_io3_di
flash_io0_oeb
flash_io1_oeb
flash_io2_oeb
flash_io3_oeb
Essentials:
resetb
core_clk
Wishbone bus:
mprj_ack_i
mprj_dat_i[31:0]
mprj_dat_o[31:0]
mprj_cyc_o
mprj_stb_o
mprj_we_o
mprj_sel_o[3:0]
mprj_adr_o[31:0]
Interface pinout (standard = pass-through)
----------------------------------------------
Clocking (DLL)
clock
porb
resetb
core_clk
Housekeeping SPI
SCK
CSB
SDI
SDO
sdo_enb
Flash pass-through:
flash_clk_oeb
flash_csb_oeb
flash_io0_ieb
flash_io1_ieb
flash_io2_ieb
flash_io3_ieb
(plus management flash signals in from SoC/out to pads)
Wishbone bus:
mprj_ack_i
mprj_dat_i[31:0]
mprj_dat_o[31:0]
mprj_cyc_o
mprj_stb_o
mprj_we_o
mprj_sel_o[3:0]
mprj_adr_o[31:0]
User ID programming
mask_rev[31:0]
Interface pinout (MPW-one compatibility level)
----------------------------------------------
Clocking (DLL)
clock
porb
resetb
core_clk
GPIO controller
serial_data
serial_clock
serial_reset
Housekeeping SPI
SCK
CSB
SDI
SDO
sdo_enb
Flash pass-through:
flash_clk_oeb
flash_csb_oeb
flash_io0_ieb
flash_io1_ieb
flash_io2_ieb
flash_io3_ieb
(plus management flash signals in from SoC/out to pads)
Wishbone bus:
mprj_ack_i
mprj_dat_i[31:0]
mprj_dat_o[31:0]
mprj_cyc_o
mprj_stb_o
mprj_we_o
mprj_sel_o[3:0]
mprj_adr_o[31:0]
User ID programming
mask_rev[31:0]
Logic Analyzer
la_io[127:0]
la_oenb[127:0]
Interface pinout (MPW-two compatibility level)
----------------------------------------------
Clocking (DLL)
clock
porb
resetb
core_clk
GPIO controller
serial_data
serial_clock
serial_reset
Housekeeping SPI
SCK
CSB
SDI
SDO
sdo_enb
Wishbone bus:
mprj_ack_i
mprj_dat_i[31:0]
mprj_dat_o[31:0]
mprj_cyc_o
mprj_stb_o
mprj_we_o
mprj_sel_o[3:0]
mprj_adr_o[31:0]
User ID programming
mask_rev[31:0]
Logic Analyzer
la_input[127:0]
la_output[127:0]
la_oenb[127:0]
la_iena[127:0]