.. raw:: html ====================== Caravel Power control ====================== The user project power control register is a "reserved" register that is intended for future use with on-chip LDOs to power the user project area. In the current version of the Caravel chip, it has no function. In the current version of the Caravel chip, all user area power supplies are provided by voltage regulators on the demonstration/development board. **The usable ranges of these power supplies is**: user1 vccd (VCCD1) = ``1.8V`` user2 vccd (VCCD2) = ``1.8V`` user1 vdda (VDDA1) = ``1.8V`` to ``5.5V`` (nominally ``3.3V``) user2 vdda (VDDA2) = ``1.8V`` to ``5.5V`` (nominally ``3.3V``) It is the responsibility of the user project area designer to ensure that the value of VDDA1 and VDDA2 is compatible with the circuitry connected to it in the user project. -------------------------------------------------------------------------- - Register name = ``reg_mprj_pwr`` - Memory location = ``0x26000004`` - Housekeeping SPI location = ``0x6e`` +------+-------+-------+-------+-------+-------+-------+-------+-------+ | | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +------+-------+-------+-------+-------+-------+-------+-------+-------+ | 0x6e | | | | | user1 | user2 | user1 | user2 | | | | | | | vccd | vccd | vdda | vdda | +------+-------+-------+-------+-------+-------+-------+-------+-------+