# SPDX-FileCopyrightText: 2020 Efabless Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# SPDX-License-Identifier: Apache-2.0


set ::env(DESIGN_NAME) gpio_control_block

set ::env(VERILOG_FILES) "\
	$::env(DESIGN_DIR)/../../verilog/rtl/defines.v\
	$::env(DESIGN_DIR)/../../verilog/rtl/gpio_control_block.v"


set ::env(PL_TARGET_DENSITY) 0.9
set ::env(CLOCK_PORT) "serial_clock"

set ::env(FP_DEF_TEMPLATE) "$::env(DESIGN_DIR)/template/gpio_control_block.def"

# This needs to be half the mgmt_core clock frequency
set ::env(CLOCK_PERIOD) "50"

set ::env(VDD_NETS) "vccd vccd1"
set ::env(GND_NETS) "vssd vssd1"

set ::env(BASE_SDC_FILE) $::env(DESIGN_DIR)/base.sdc

## Synthesis
set ::env(SYNTH_READ_BLACKBOX_LIB) 1
set ::env(SYNTH_USE_PG_PINS_DEFINES) "USE_POWER_PINS"
set ::env(SYNTH_STRATEGY) "AREA 0"

## Floorplan
set ::env(FP_SIZING) absolute
set ::env(DIE_AREA) "0 0 170 65"

set ::env(RIGHT_MARGIN_MULT) 256
set ::env(LEFT_MARGIN_MULT) 10
set ::env(TOP_MARGIN_MULT) 1
set ::env(BOTTOM_MARGIN_MULT) 1

set ::env(DPL_CELL_PADDING) 0
set ::env(GPL_CELL_PADDING) 0
set ::env(DIODE_PADDING) 0

## PDN
set ::env(FP_PDN_MACRO_HOOKS) "\
	gpio_logic_high vccd1 vssd1 vccd1 vssd1"

set ::env(PDN_CFG) $::env(DESIGN_DIR)/pdn.tcl
set ::env(FP_PDN_AUTO_ADJUST) 0

set ::env(FP_PDN_VWIDTH) 1.6
set ::env(FP_PDN_HWIDTH) 1.6

set ::env(FP_PDN_HORIZONTAL_HALO) 0
set ::env(FP_PDN_VERTICAL_HALO) 0

set ::env(FP_PDN_CHECK_NODES) 0

# these PDN vars are mostly hard coded in the custom ./pdn.tcl file
# keeping them in case openlane depends on the variable definition
set ::env(FP_PDN_HOFFSET) 1.5
set ::env(FP_PDN_VOFFSET) 9.0

set ::env(FP_PDN_HPITCH) 20
set ::env(FP_PDN_VPITCH) 25

set ::env(FP_PDN_VSPACING) 3.4
set ::env(FP_PDN_HSPACING) 3.4

## Placement 
set ::env(PL_TARGET_DENSITY) 0.95
# for some reason resizer is leaving a floating net after running repair_tie_fanout command
set ::env(PL_RESIZER_REPAIR_TIE_FANOUT) 0

# mgmt_gpio_in is driven by a tristate cell
# set ::env(DONT_BUFFER_PORTS) "mgmt_gpio_in"

## Routing
set ::env(GRT_MINLAYER) 2
set ::env(GRT_MAXLAYER) 4
set ::env(GRT_ADJUSTMENT) 0.05

# Add obstructions on the areas that will lie underneath the padframe 
set ::env(GRT_OBS) "\ 
	li1 0 0 16.79500 30.02500,
	li1 0 29.96500 4.26500 65.07000,
	li1 4.21500 57.40500 49.81500 64.93000,
	li1 16.83000 0 49.41000 5.24000,
	li1 49.000 0 169.81000 64.84500,
	met5 50 0 170 65,
	met4 49 0 170 65,
	met2 120 0 170 65,
	met1 120 0 170 65"

## Diode Insertion
set ::env(DIODE_INSERTION_STRATEGY) 4

set ::env(FP_TAP_HORIZONTAL_HALO) {2}                                                                                                                                                                  
set ::env(FP_TAP_VERTICAL_HALO) {2}

## Internal macros
set ::env(MACRO_PLACEMENT_CFG) $::env(DESIGN_DIR)/macro_placement.cfg

set ::env(VERILOG_FILES_BLACKBOX) "\
	$::env(DESIGN_DIR)/../../verilog/rtl/gpio_logic_high.v"

set ::env(EXTRA_LEFS) "\
	$::env(DESIGN_DIR)/../../lef/gpio_logic_high.lef"

set ::env(EXTRA_GDS_FILES) "\
	$::env(DESIGN_DIR)/../../gds/gpio_logic_high.gds"

set ::env(GLB_RESIZER_TIMING_OPTIMIZATIONS) 1

#Placement
set ::env(PL_RESIZER_DESIGN_OPTIMIZATIONS) 1

#Post cts
set ::env(PL_RESIZER_TIMING_OPTIMIZATIONS) 0

set ::env(PL_RESIZER_BUFFER_INPUT_PORTS) 1
set ::env(PL_RESIZER_BUFFER_OUTPUT_PORTS) 1

set ::env(PL_RESIZER_MAX_SLEW_MARGIN) 1
set ::env(PL_RESIZER_MAX_CAP_MARGIN) 1

set ::env(CLOCK_TREE_SYNTH) 1
set ::env(FP_DEF_TEMPLATE) $::env(DESIGN_DIR)/template/gpio_control_block.def
set ::env(SYNTH_BUFFERING) 0
set ::env(SYNTH_SIZING) 0
# 0.07 ns 70 ps

# set ::env(PL_RESIZER_HOLD_SLACK_MARGIN) 0.07
# set ::env(PL_RESIZER_ALLOW_SETUP_VIOS) 1
# set ::env(PL_RESIZER_HOLD_MAX_BUFFER_PERCENT) 2

set ::env(QUIT_ON_MAGIC_DRC) 1
set ::env(QUIT_ON_LVS_ERROR) 1

set ::env(SYNTH_EXTRA_MAPPING_FILE) $::env(DESIGN_DIR)/yosys_mapping.v

set ::env(DECAP_CELL) {sky130_fd_sc_hd__decap_12 sky130_fd_sc_hd__decap_8 sky130_fd_sc_hd__decap_6 sky130_fd_sc_hd__decap_4 sky130_fd_sc_hd__decap_3}
set ::env(DRC_EXCLUDE_CELL_LIST) $::env(DESIGN_DIR)/drc_exclude_list.txt
set ::env(DRC_EXCLUDE_CELL_LIST_OPT) $::env(DESIGN_DIR)/drc_exclude_list.txt
set ::env(RSZ_DONT_TOUCH) "user_gpio_out user_gpio_oeb serial_clock_out serial_load_out gpio_defaults*"
set ::env(FP_PDN_SKIPTRIM) 1
set ::env(MAGIC_NO_DEF_BLOCKAGES) 1