# SPDX-FileCopyrightText: 2020 Efabless Corporation # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # SPDX-License-Identifier: Apache-2.0 set script_dir [file dirname [file normalize [info script]]] set ::env(DESIGN_NAME) gpio_control_block set ::env(VERILOG_FILES) "\ $script_dir/../../verilog/rtl/defines.v\ $script_dir/../../verilog/rtl/gpio_control_block.v" set ::env(CLOCK_PORT) "serial_clock" set ::env(CLOCK_PERIOD) "25" set ::env(VDD_NETS) "vccd vccd1" set ::env(GND_NETS) "vssd vssd1" ## Synthesis set ::env(SYNTH_READ_BLACKBOX_LIB) 1 set ::env(SYNTH_USE_PG_PINS_DEFINES) "USE_POWER_PINS" ## Floorplan set ::env(FP_SIZING) absolute set ::env(DIE_AREA) "0 0 170 70" set ::env(FP_PIN_ORDER_CFG) $script_dir/pin_order.cfg set ::env(FP_IO_VEXTEND) 20 set ::env(FP_IO_HLENGTH) 100 set ::env(RIGHT_MARGIN_MULT) 262 set ::env(LEFT_MARGIN_MULT) 10 set ::env(TOP_MARGIN_MULT) 4 set ::env(BOTTOM_MARGIN_MULT) 4 set ::env(CELL_PAD) 0 ## PDN set ::env(PDN_CFG) $script_dir/pdn.tcl set ::env(FP_PDN_AUTO_ADJUST) 0 set ::env(FP_PDN_CORE_RING) 1 set ::env(FP_PDN_VWIDTH) 1.6 set ::env(FP_PDN_HWIDTH) 1.6 set ::env(FP_HORIZONTAL_HALO) 2 set ::env(FP_VERTICAL_HALO) 2 set ::env(FP_PDN_HOFFSET) 1.5 set ::env(FP_PDN_VOFFSET) 8.5 set ::env(FP_PDN_HPITCH) 15.5 set ::env(FP_PDN_VPITCH) 15.5 set ::env(FP_PDN_VSPACING) 3.4 set ::env(FP_PDN_HSPACING) 3.4 set ::env(FP_PDN_CORE_RING_VOFFSET) 2 set ::env(FP_PDN_CORE_RING_HOFFSET) 2 ## Placement set ::env(PL_TARGET_DENSITY) 0.898 # for some reason resizer is leaving a floating net after running repair_tie_fanout command set ::env(PL_RESZIER_REPIAR_TIE_FANOUT) 0 # mgmt_gpio_in is driven by a tristate cell set ::env(DONT_BUFFER_PORTS) "mgmt_gpio_in" ## Routing set ::env(GLB_RT_MINLAYER) 2 set ::env(GLB_RT_MAXLAYER) 4 set ::env(GLB_RT_ADJUSTMENT) 0.05 # Add obstructions on the areas that will lie underneath the padframe set ::env(GLB_RT_OBS) "\ met5 67 0 170 70, met4 67 0 170 70, met2 120 0 170 70, met1 120 0 170 70" ## Internal macros set ::env(MACRO_PLACEMENT_CFG) $script_dir/macro_placement.cfg set ::env(VERILOG_FILES_BLACKBOX) "\ $script_dir/../../verilog/rtl/gpio_logic_high.v" set ::env(EXTRA_LEFS) "\ $script_dir/../../lef/gpio_logic_high.lef" set ::env(EXTRA_GDS_FILES) "\ $script_dir/../../gds/gpio_logic_high.gds"