~ increase width for more spread decaps
+ add or cells to cell exclude
~ change placement density in accordance to area
~ change padding to allow for space for decaps
~ increase height for more spread decap insertion
+ add or cells to cell exclude
~ adjust pdn to have an offset half to pitch
~ change placement density in accordance to area
~ change padding to allow for space for decap insertion
~ enable synth buffering to fix fanout
~ add *buf_1* to no synth list
~ add attribute (* keep *) to the oscillator as dont
touch for yosys
!need to verify that the oscillator remains untouched
being buffered pass through the buffer macros. Removed the
straight-through signals from the layout, and renumbered the
vectors in the buffer cells, which no longer match the numbering
at the top level (unfortunately).
above housekeeping, because the upper GPIO pins are in the wrong
place relative to the new GPIO signal routing below the SoC.
Added pins for the pass-through connections. Unconnected/
unrouted OEB pins are still not present and probably should be
removed from the RTL.
Corrected one instance where a buffer had incorrectly been replaced
with a decap cell. Moved the left-hand side in by 0.6um to clear
the chip_io connections on the left-hand side. Corrected a small
DRC error in a route position at the bottom.
based on feedback from tim in order to generate a lef view
with a zero origin and avoid any hacks
+ add caravel_power_routing lef
+ sync caravel_power_routing gds and mag
+ add custom interactive script to insert a buffer on user_clk output
and have a large buffer on core_clk
~ change pdn config to match top level
~ change sdc
~ change openlane configuration
establishes all the pin names, positions, classes, and uses. Adds
a script which uses the LEF abstract view to annotate the top level
layouts for caravel and caravan with the chip pins (not yet run---
waiting for a valid top level layout after top-level routing).
Also: Updated the copyright block to increase the chip version
number and update the date.
"-hide" option, but was also missing the metals 2 and 3 over the
substrate contact, allowing routes on those layers to short to
the actual layout. The new LEF properly reflects the current
version of the POR layout.
- reimplement using a sparecell
- reimplement using newest open_pdks
!important using openlane pre odb with some local patches which
most if not all are merged in the current head of openlane however
still takes effort to update the interactive script to be latest
openlane compatible
!important override abstract lef generated by openlane. openlane
generates lef and mag that contain def BLOCKAGE layers that cause
congestions during top level routing
view of constant_block which was recently merged into the repository.
The constant_block instance positions and connections were modified
slightly to avoid routing over obstruction areas.
- rtl updated
~ add one column to the right to pass placement congestion
~ density adjusted (probably has no effect)
+ manually add isosubstrate layer in mag and gds from older iterations
!important still need to run dynamic simulations
!important depends on some updates to openlane
!important need to be able to recreate using newer openlane versions
- high level changes:
* add larger buffers on output ports
* add buffers on input ports
* adjust sdc file increasing output load and setting a high transition
- detailed changes:
* add interactive script for openlane where the order of events is a bit shuffled
- to add obstruction before pdn
- to manually insert buffers on some ports
- to manually remove buffers inserted by synthesis on for example serial_clock_out
* change openlane config adding extra row and columns to increase the space and fit the
added buffers
* change config to enable buffering
* increase density for better placement?
* change the cell exclude list. some excluded cells didn't make sense
* ef decap cells break dynamic sims?
* add custom pdn script for to duplicate the old pdn
- misc changes:
* fix openlane makefile to properly detect interactive script
!important still need to run dynamic simulations
!important depends on some updates to openlane
update gpio_control_block config for new openlane versions:
- disable `SYNTH_BUFFERING` and `SYNTH_SIZING` to limit the design size
and fit the floorplan
- change `SYNTH_STRATEGY` to `AREA 0` to minimize design cells
- disable `PL_RESIZER_TIMING_OPTIMIZATIONS` and
enable `GLB_RESIZER_TIMING_OPTIMIZATIONS`
- remove `FP_IO_*` and replace them with `FP_DEF_TEMPLATE` for io placement
- set `DECAP_CELL` to not use ef decaps.. i think that was for simulations?
- enable some turned off `QUIT_*` variables
- replace deprecated variables such as `GLB_RT_*`
- customize `pdn.tcl` to force pdn straps to follow the old pattern
- replace `$script_dir` with `$::env(DESIGN_DIR)`
!IMPORTANT - still need to run dynamic simulations
* - update caravan configuration
* change correct gpio_default blocks instance names
* implement powerrouting work around
* place spare logic blocks
* keep the history of runs and sym link last/final one
* - update caravan mag, def and gl views
- add fake power routing cell in the rtl as a placeholder for openlane
to prevent routing on that cell
- fix some syntax errors in chip_io_alt
- match simple_por lef pins with mag by regenerating it
* Apply automatic changes to Manifest and README.rst
* add caravan power routing lef
* - update mag and def view of caravan
- add_macro_placement for fake cell
* Added back the power routing to Caravan, fixed DRC errors, ran LVS,
corrected placement of isolated substrate regions, and replaced the
signal routing for the analog lines. Be aware that merging with
main may cause issues with the mgmt_protect.mag file and its
subcells mprj2_logic_high.mag and mprj_logic_high.mag. It may be
worth cherry-picking the files to merge and exclude those layouts.
Co-authored-by: kareem <kareem.farid@efabless.com>
Co-authored-by: kareefardi <kareefardi@users.noreply.github.com>
Co-authored-by: Jeff DiCorpo <42048757+jeffdi@users.noreply.github.com>
* - add openlane patch file to for input buffering workaround
- update configuration of mgmt protect
* mgmt_protect updated
* mgmt_protect updated
* remove some via3 to fix power shorts
Co-authored-by: Marwan Abbas <marwan@ciic.c.catx-ext-efabless.internal>
Marwan Abbas
Marwan Abbas
kareem
mo-hosni
Tim Edwards
Mohamed Shalan
passant5
Mohamed Hosni
Kareem Farid
manarabdelaty
jeffdi