+ add sky130_ef_sc_hd__decap_12 decaps in the rtl of gpio_signal_buffering
+ add sky130_ef_sc_hd__decap_12 stub file for openlane; there is no
yosys-parseable verilog model for sky130_ef_sc_hd__decap_12
~ change config of gpio_signal_buffering* to add sky130_ef_sc_hd__decap_12
~ regenerate the gl netlist based on the above changes
being buffered pass through the buffer macros. Removed the
straight-through signals from the layout, and renumbered the
vectors in the buffer cells, which no longer match the numbering
at the top level (unfortunately).
same file), errors (buffer output pin name, power supplies not
passed at the top level). Corrected a major error that prevented
the use of the buffers in simulation, so this was not previously
verified by simulation. The buffering has now been properly
verified.
gpio_signal_buffering (gpio_signal_buffering_alt in caravan).
Note that this macro requires manual placement and routing, like
the padframe, and the top level will need to route around its own
internal routes.
Kareem Farid
Tim Edwards