* Fixed caravan top level power routing and updated views for mag, gds and lef
* caravan(rtl): updates
~ typos fix
- remove unused pin in chip_io_alt
+ add caravan_power_routing verilog
* Apply automatic changes to Manifest and README.rst
* ~ update caravan openlane configs to add extra cell references
~ correct placment and cell names of some macro in caravan interactive script
* reharden: caravan
+ add non functional blocks
+ add an initial iteration of caravan
* Apply automatic changes to Manifest and README.rst
* Revert "Fixed caravan top level power routing and updated views for mag, gds and lef"
This reverts commit 70628f748a.
* fixed caravan top level power routing
* reharden: caravan
based on new power routing
~ guard rtl chip_io power pins in the power macro guard
* Apply automatic changes to Manifest and README.rst
* fixed caravan top level power routing
* rehadren: caravan
+ add caravan signal routing to openlane run
~ change rtl to guard power and analog against routing by
openlane by ifndef TOP_ROUTING
~ add pr bounadry for caravan signal routing to fix origin issues
* Apply automatic changes to Manifest and README.rst
* fix power connection in buffering block and regenerate gl
* Apply automatic changes to Manifest and README.rst
* updated views for caravan
* Added extract unique to lvs-gds-cell target. (#313)
* This fixes errors in the top level RTL of caravan that failed to
hook up the buffers through the SoC correctly.
* Apply automatic changes to Manifest and README.rst
* reharden: caravan
~ rtl updated
* fixed caravan mag top level
* updated views for caravan + signoff
* fixed top level cell name
* fix syntax error related to signal initialization place in caravan (#319)
* fix syntax error related to signal initialization place in caravan- fixed in caravel in another commit
* Apply automatic changes to Manifest and README.rst
Co-authored-by: M0stafaRady <M0stafaRady@users.noreply.github.com>
* Apply automatic changes to Manifest and README.rst
Co-authored-by: Marwan Abbas <marwaneltoukhy@aucegypt.edu>
Co-authored-by: kareem <kareem.farid@efabless.com>
Co-authored-by: kareefardi <kareefardi@users.noreply.github.com>
Co-authored-by: Mitch Bailey <d-m-bailey@users.noreply.github.com>
Co-authored-by: Tim Edwards <tim@opencircuitdesign.com>
Co-authored-by: RTimothyEdwards <RTimothyEdwards@users.noreply.github.com>
Co-authored-by: Marwan Abbas <67271180+marwaneltoukhy@users.noreply.github.com>
Co-authored-by: M0stafaRady <107422726+M0stafaRady@users.noreply.github.com>
Co-authored-by: M0stafaRady <M0stafaRady@users.noreply.github.com>
Co-authored-by: jeffdi <jeffdi@users.noreply.github.com>
includes RTL change inside the padframe definition to remove one
previously unnoticed hard-wired connection between VDDIO and a
3.3V domain digital input pin.
Corrected the pad constant connections to all be in the correct domain
(1.8V or 3.3V). Created a new "constant_block" module that generates
a single constant 1 and 0 value in the 1.8V domain, and used 7 of these
in the chip_io (and chip_io_alt) modules to create the 1.8V domain
constant signals for the seven pads belonging to the management (clock,
reset, flash SPI, and management GPIO).
inputs that are permanently tied low or high come from either
the local "TIE" pad connections (if they are in the 3.3V
domain) or from a constant one wire in the 1.8V domain that
is generated in the gpio_control_block module and exported
to the chip_io (or chip_io_alt) module.
* - update caravan configuration
* change correct gpio_default blocks instance names
* implement powerrouting work around
* place spare logic blocks
* keep the history of runs and sym link last/final one
* - update caravan mag, def and gl views
- add fake power routing cell in the rtl as a placeholder for openlane
to prevent routing on that cell
- fix some syntax errors in chip_io_alt
- match simple_por lef pins with mag by regenerating it
* Apply automatic changes to Manifest and README.rst
* add caravan power routing lef
* - update mag and def view of caravan
- add_macro_placement for fake cell
* Added back the power routing to Caravan, fixed DRC errors, ran LVS,
corrected placement of isolated substrate regions, and replaced the
signal routing for the analog lines. Be aware that merging with
main may cause issues with the mgmt_protect.mag file and its
subcells mprj2_logic_high.mag and mprj_logic_high.mag. It may be
worth cherry-picking the files to merge and exclude those layouts.
Co-authored-by: kareem <kareem.farid@efabless.com>
Co-authored-by: kareefardi <kareefardi@users.noreply.github.com>
Co-authored-by: Jeff DiCorpo <42048757+jeffdi@users.noreply.github.com>
Fixed rstb_h, which was being input to low-voltage blocks. (2)
Fixed flash_csb_ieb_core and flash_clk_ieb_core, which were not
output from housekeeping as they should be; the solution was
to tie the INP_DIS lines low at the pad by connecting them to
the TIE_LO_ESD line. This should probably be addressed in
housekeeping but would change the current pinout.
problems that had been fixed recently in caravel, and which cause
the caravan testbench to break, but which were not noticed; (2)
corrected the count of gpio_control_block modules, which was one
off, with two of them overlapping (not sure how that even passes
simulation, but it did); (3) fixed a power connection in the
caravel chip_io, which should have caused chip_io to fail LVS,
so apparently LVS was not run on chip_io. . .
deleted "resetb_core_h" port label. Corrected the chip_io and chip_io_alt
verilog RTL files to replace the user area power supply clamp cells with
the new clamped3 cell from open_pdks.
around the entire padframe. The vccd1 and vccd2 domains are local
to their respective pads, and any bus routing must be done inside
the padframe. This means that all pads operate on global vddio for
3.3V as before, but also global vccd for 1.8V. The user 1.8V voltage
domain only goes as far as the input to the GPIO control block.
Jeff DiCorpo
Tim Edwards