* reharden: caravel
~ shift caravel_clocking due to change in size
~ change the pr boundary of caravel_power_routing mag file
~ regenarate lef of caravel_power_routing
* update pdn for `caravel_clocking` & `digital_pll`
* added script to update and generate the power routing views
* ~ run update_power_routing_views from the caravel root with prboundary
* fix output message
* added power routing lef, mag and gds
* fix update_power_routing_views saving wrong cell name
* reharden: caravel
~ incorperate pdn changes
~ re-extract spefs
* fix caravel_power_routing views
* fix abs path in maglef views
* fix abs path in mag views
add substcut layers in gpio_control_block and mgmt_protect
* generate a new chip_io gds
* regenerate gpio_control_block due to mag and gds not in sync
* reharden: caravel
~ change config to pass clean routing
~ use updated views of macros
* lvs clean views
* add caravel top-level generated sdf for all corners
* fix absolute path for mgmt_core_wrapper
Co-authored-by: kareem <kareem.farid@efabless.com>
Co-authored-by: Bassant Hassan <bassant.hassan@efabless.com>
- reimplement using a sparecell
- reimplement using newest open_pdks
!important using openlane pre odb with some local patches which
most if not all are merged in the current head of openlane however
still takes effort to update the interactive script to be latest
openlane compatible
!important override abstract lef generated by openlane. openlane
generates lef and mag that contain def BLOCKAGE layers that cause
congestions during top level routing
- rtl updated
~ add one column to the right to pass placement congestion
~ density adjusted (probably has no effect)
+ manually add isosubstrate layer in mag and gds from older iterations
!important still need to run dynamic simulations
!important depends on some updates to openlane
!important need to be able to recreate using newer openlane versions
- high level changes:
* add larger buffers on output ports
* add buffers on input ports
* adjust sdc file increasing output load and setting a high transition
- detailed changes:
* add interactive script for openlane where the order of events is a bit shuffled
- to add obstruction before pdn
- to manually insert buffers on some ports
- to manually remove buffers inserted by synthesis on for example serial_clock_out
* change openlane config adding extra row and columns to increase the space and fit the
added buffers
* change config to enable buffering
* increase density for better placement?
* change the cell exclude list. some excluded cells didn't make sense
* ef decap cells break dynamic sims?
* add custom pdn script for to duplicate the old pdn
- misc changes:
* fix openlane makefile to properly detect interactive script
!important still need to run dynamic simulations
!important depends on some updates to openlane
update gpio_control_block config for new openlane versions:
- disable `SYNTH_BUFFERING` and `SYNTH_SIZING` to limit the design size
and fit the floorplan
- change `SYNTH_STRATEGY` to `AREA 0` to minimize design cells
- disable `PL_RESIZER_TIMING_OPTIMIZATIONS` and
enable `GLB_RESIZER_TIMING_OPTIMIZATIONS`
- remove `FP_IO_*` and replace them with `FP_DEF_TEMPLATE` for io placement
- set `DECAP_CELL` to not use ef decaps.. i think that was for simulations?
- enable some turned off `QUIT_*` variables
- replace deprecated variables such as `GLB_RT_*`
- customize `pdn.tcl` to force pdn straps to follow the old pattern
- replace `$script_dir` with `$::env(DESIGN_DIR)`
!IMPORTANT - still need to run dynamic simulations
mo-hosni
Marwan Abbas
kareem
Kareem Farid
manarabdelaty