diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.area.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.area.rpt new file mode 100644 index 00000000..64497ff6 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.area.rpt @@ -0,0 +1,5 @@ + +=========================================================================== + report_design_area +============================================================================ +Design area 2408 u^2 89% utilization. diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.clock_skew.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.clock_skew.rpt new file mode 100644 index 00000000..15534051 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.clock_skew.rpt @@ -0,0 +1,14 @@ + +=========================================================================== + report_clock_skew +============================================================================ +Clock serial_clock +Latency CRPR Skew +_122_/CLK ^ + 0.85 +_123_/CLK ^ + 0.76 -0.06 0.02 + +Clock serial_load +No launch/capture paths found. + diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.max.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.max.rpt new file mode 100644 index 00000000..a2ba63e7 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.max.rpt @@ -0,0 +1,679 @@ + +=========================================================================== +report_checks -path_delay max (Setup) +============================================================================ +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.73 1.27 11.27 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.73 0.00 11.27 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.27 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 50.82 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.05 50.37 library recovery time + 50.37 data required time +----------------------------------------------------------------------------- + 50.37 data required time + -11.27 data arrival time +----------------------------------------------------------------------------- + 39.11 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 v _079_/B (sky130_fd_sc_hd__nand2b_2) + 0.70 1.22 11.22 ^ _079_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _012_ (net) + 0.70 0.00 11.22 ^ _111_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.22 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.80 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 50.81 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.05 50.36 library recovery time + 50.36 data required time +----------------------------------------------------------------------------- + 50.36 data required time + -11.22 data arrival time +----------------------------------------------------------------------------- + 39.14 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 v _089_/B (sky130_fd_sc_hd__nand2b_2) + 0.68 1.20 11.20 ^ _089_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _022_ (net) + 0.68 0.00 11.20 ^ _116_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.20 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 50.80 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.80 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.05 50.36 library recovery time + 50.36 data required time +----------------------------------------------------------------------------- + 50.36 data required time + -11.20 data arrival time +----------------------------------------------------------------------------- + 39.16 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 v _085_/B (sky130_fd_sc_hd__nand2b_2) + 0.70 1.22 11.22 ^ _085_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _018_ (net) + 0.70 0.00 11.22 ^ _114_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.22 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 50.83 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 50.83 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.43 clock uncertainty + 0.00 50.43 clock reconvergence pessimism + -0.04 50.38 library recovery time + 50.38 data required time +----------------------------------------------------------------------------- + 50.38 data required time + -11.22 data arrival time +----------------------------------------------------------------------------- + 39.16 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 v _077_/B (sky130_fd_sc_hd__nand2b_2) + 0.68 1.20 11.20 ^ _077_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _010_ (net) + 0.68 0.00 11.20 ^ _110_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.20 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.82 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.04 50.38 library recovery time + 50.38 data required time +----------------------------------------------------------------------------- + 50.38 data required time + -11.20 data arrival time +----------------------------------------------------------------------------- + 39.18 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.54 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.22 26.77 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.77 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.07 26.84 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.84 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.10 0.41 27.25 ^ _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.10 0.00 27.25 ^ output21/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 27.54 ^ output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.27 0.01 27.55 ^ serial_data_out (out) + 27.55 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.55 data arrival time +----------------------------------------------------------------------------- + 12.05 slack (MET) + + +Startpoint: serial_load (clock source 'serial_load') +Endpoint: serial_load_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_load (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 25.00 v clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 26.54 v clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.23 26.77 v clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 26.77 v serial_load_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.26 27.03 v serial_load_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_load_out (net) + 0.18 0.03 27.06 v serial_load_out (out) + 27.06 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.06 data arrival time +----------------------------------------------------------------------------- + 12.54 slack (MET) + + +Startpoint: serial_clock (clock source 'serial_clock') +Endpoint: serial_clock_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.54 v clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.22 26.76 v clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 26.76 v serial_clock_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.26 27.03 v serial_clock_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_clock_out (net) + 0.18 0.02 27.04 v serial_clock_out (out) + 27.04 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.04 data arrival time +----------------------------------------------------------------------------- + 12.56 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Path Group: serial_clock +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.34 v _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.06 0.00 1.34 v _132_/D (sky130_fd_sc_hd__dfrtp_2) + 1.34 data arrival time + + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.40 26.40 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.40 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.20 26.60 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.60 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.06 26.66 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.66 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + -0.40 26.26 clock uncertainty + 0.06 26.32 clock reconvergence pessimism + -0.12 26.20 library setup time + 26.20 data required time +----------------------------------------------------------------------------- + 26.20 data required time + -1.34 data arrival time +----------------------------------------------------------------------------- + 24.86 slack (MET) + + +Startpoint: mgmt_gpio_oeb (input port clocked by serial_clock) +Endpoint: pad_gpio_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v mgmt_gpio_oeb (in) + 2 0.01 mgmt_gpio_oeb (net) + 5.00 0.00 10.00 v input1/A (sky130_fd_sc_hd__buf_2) + 0.16 1.31 11.31 v input1/X (sky130_fd_sc_hd__buf_2) + 2 0.01 net1 (net) + 0.16 0.00 11.31 v _063_/C (sky130_fd_sc_hd__and3b_2) + 0.06 0.30 11.62 v _063_/X (sky130_fd_sc_hd__and3b_2) + 2 0.01 _043_ (net) + 0.06 0.00 11.62 v _064_/B (sky130_fd_sc_hd__and2b_2) + 0.05 0.23 11.85 v _064_/X (sky130_fd_sc_hd__and2b_2) + 1 0.01 _044_ (net) + 0.05 0.00 11.85 v _066_/A1 (sky130_fd_sc_hd__o21ai_4) + 0.17 0.20 12.04 ^ _066_/Y (sky130_fd_sc_hd__o21ai_4) + 1 0.02 net16 (net) + 0.17 0.00 12.04 ^ output16/A (sky130_fd_sc_hd__buf_16) + 0.27 0.31 12.35 ^ output16/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_out (net) + 0.27 0.01 12.36 ^ pad_gpio_out (out) + 12.36 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -12.36 data arrival time +----------------------------------------------------------------------------- + 27.24 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.35 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.06 0.00 1.35 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.64 1.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.09 0.00 1.98 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 1.98 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.82 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.25 library setup time + 50.25 data required time +----------------------------------------------------------------------------- + 50.25 data required time + -1.98 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.05 0.00 1.32 v hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.63 1.95 v hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.09 0.00 1.95 v _113_/D (sky130_fd_sc_hd__dfbbn_2) + 1.95 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 50.80 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.18 50.22 library setup time + 50.22 data required time +----------------------------------------------------------------------------- + 50.22 data required time + -1.95 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _112_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.49 1.34 v _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.06 0.00 1.34 v hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.63 1.97 v hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.08 0.00 1.97 v _112_/D (sky130_fd_sc_hd__dfbbn_2) + 1.97 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.03 0.00 50.82 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.24 library setup time + 50.24 data required time +----------------------------------------------------------------------------- + 50.24 data required time + -1.97 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.49 1.34 v _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.06 0.00 1.34 v hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.63 1.96 v hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.08 0.00 1.96 v _110_/D (sky130_fd_sc_hd__dfbbn_2) + 1.96 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.82 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.25 library setup time + 50.25 data required time +----------------------------------------------------------------------------- + 50.25 data required time + -1.96 data arrival time +----------------------------------------------------------------------------- + 48.29 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.05 0.00 1.32 v hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.61 1.94 v hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.08 0.00 1.94 v _116_/D (sky130_fd_sc_hd__dfbbn_2) + 1.94 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 50.80 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.80 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.17 50.23 library setup time + 50.23 data required time +----------------------------------------------------------------------------- + 50.23 data required time + -1.94 data arrival time +----------------------------------------------------------------------------- + 48.30 slack (MET) + + diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.min.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.min.rpt new file mode 100644 index 00000000..b3de4851 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.min.rpt @@ -0,0 +1,714 @@ + +=========================================================================== +report_checks -path_delay min (Hold) +============================================================================ +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 ^ _068_/B (sky130_fd_sc_hd__or2_0) + 0.07 0.29 10.29 ^ _068_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _001_ (net) + 0.07 0.00 10.29 ^ _106_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.29 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.91 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -10.29 data arrival time +----------------------------------------------------------------------------- + 8.91 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 ^ _082_/B (sky130_fd_sc_hd__or2_0) + 0.06 0.28 10.28 ^ _082_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _015_ (net) + 0.06 0.00 10.28 ^ _113_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.28 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.89 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.07 1.36 library removal time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -10.28 data arrival time +----------------------------------------------------------------------------- + 8.92 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 ^ _070_/B (sky130_fd_sc_hd__or2_0) + 0.08 0.30 10.30 ^ _070_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _003_ (net) + 0.08 0.00 10.30 ^ _107_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.30 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.91 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -10.30 data arrival time +----------------------------------------------------------------------------- + 8.92 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 ^ _092_/B (sky130_fd_sc_hd__or2_0) + 0.06 0.28 10.28 ^ _092_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _025_ (net) + 0.06 0.00 10.28 ^ _118_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.28 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.88 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.07 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.28 data arrival time +----------------------------------------------------------------------------- + 8.93 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 ^ _090_/B (sky130_fd_sc_hd__or2_0) + 0.07 0.29 10.29 ^ _090_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _023_ (net) + 0.07 0.00 10.29 ^ _117_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.29 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.88 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.07 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.29 data arrival time +----------------------------------------------------------------------------- + 8.94 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.05 0.00 1.13 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.66 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.08 0.00 1.66 ^ _124_/D (sky130_fd_sc_hd__dfrtp_4) + 1.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.04 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.52 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.05 0.00 1.13 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.53 1.66 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.07 0.00 1.66 ^ _131_/D (sky130_fd_sc_hd__dfrtp_4) + 1.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.24 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.04 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.52 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.14 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.05 0.00 1.14 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.08 0.00 1.67 ^ _128_/D (sky130_fd_sc_hd__dfrtp_4) + 1.67 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.24 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.04 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.53 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.36 1.12 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.04 0.00 1.12 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.55 1.68 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.11 0.00 1.68 ^ _120_/D (sky130_fd_sc_hd__dfrtp_4) + 1.68 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.06 1.19 clock reconvergence pessimism + -0.05 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.54 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.05 0.00 1.13 ^ hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.08 0.00 1.67 ^ _126_/D (sky130_fd_sc_hd__dfrtp_4) + 1.67 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.08 1.17 clock reconvergence pessimism + -0.04 1.13 library hold time + 1.13 data required time +----------------------------------------------------------------------------- + 1.13 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.54 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.05 0.00 1.13 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.53 1.66 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.07 0.00 1.66 ^ _114_/D (sky130_fd_sc_hd__dfbbn_2) + 1.66 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 0.91 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 0.91 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.04 1.36 library hold time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.30 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.39 1.15 ^ _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.06 0.00 1.15 ^ hold3/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.51 1.66 ^ hold3/X (sky130_fd_sc_hd__dlygate4sd3_1) + 1 0.00 net48 (net) + 0.05 0.00 1.66 ^ _115_/D (sky130_fd_sc_hd__dfbbn_2) + 1.66 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 0.91 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.05 1.36 library hold time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.31 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.05 0.00 1.13 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.66 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.08 0.00 1.66 ^ _111_/D (sky130_fd_sc_hd__dfbbn_2) + 1.66 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 0.89 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.04 1.33 library hold time + 1.33 data required time +----------------------------------------------------------------------------- + 1.33 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.33 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.36 1.12 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.04 0.00 1.12 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.55 1.68 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.11 0.00 1.68 ^ _106_/D (sky130_fd_sc_hd__dfbbn_2) + 1.68 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.91 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.03 1.34 library hold time + 1.34 data required time +----------------------------------------------------------------------------- + 1.34 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.33 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.14 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.05 0.00 1.14 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.08 0.00 1.67 ^ _108_/D (sky130_fd_sc_hd__dfbbn_2) + 1.67 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 0.89 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.04 1.33 library hold time + 1.33 data required time +----------------------------------------------------------------------------- + 1.33 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.34 slack (MET) + + diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.power.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.power.rpt new file mode 100644 index 00000000..9ae53496 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.power.rpt @@ -0,0 +1,14 @@ + +=========================================================================== + report_power +============================================================================ +Group Internal Switching Leakage Total + Power Power Power Power (Watts) +---------------------------------------------------------------- +Sequential 2.58e-05 1.05e-06 2.17e-10 2.68e-05 20.0% +Combinational 3.88e-05 6.84e-05 7.83e-10 1.07e-04 80.0% +Macro 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +Pad 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +---------------------------------------------------------------- +Total 6.46e-05 6.95e-05 1.00e-09 1.34e-04 100.0% + 48.2% 51.8% 0.0% diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.rpt new file mode 100644 index 00000000..319108f1 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.rpt @@ -0,0 +1,145 @@ + +=========================================================================== +report_checks -unconstrained +============================================================================ +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.73 1.27 11.27 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.73 0.00 11.27 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.27 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 50.82 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.05 50.37 library recovery time + 50.37 data required time +----------------------------------------------------------------------------- + 50.37 data required time + -11.27 data arrival time +----------------------------------------------------------------------------- + 39.11 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.54 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.22 26.77 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.77 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.07 26.84 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.84 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.10 0.41 27.25 ^ _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.10 0.00 27.25 ^ output21/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 27.54 ^ output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.27 0.01 27.55 ^ serial_data_out (out) + 27.55 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.55 data arrival time +----------------------------------------------------------------------------- + 12.05 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.35 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.06 0.00 1.35 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.64 1.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.09 0.00 1.98 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 1.98 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.82 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.25 library setup time + 50.25 data required time +----------------------------------------------------------------------------- + 50.25 data required time + -1.98 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + + +=========================================================================== +report_checks --slack_max -0.01 +============================================================================ +No paths found. diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.slew.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.slew.rpt new file mode 100644 index 00000000..43cf8e06 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.slew.rpt @@ -0,0 +1,115 @@ + +=========================================================================== + report_check_types -max_slew -max_cap -max_fanout -violators +============================================================================ +max slew + +Pin Limit Slew Slack +------------------------------------------------------------ +ANTENNA__080__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__081__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_081_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__061__A0/DIODE 1.25 5.00 -3.75 (VIOLATED) +_087_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__089__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__088__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__084__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__085__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_089_/B 1.25 5.00 -3.75 (VIOLATED) +_086_/B 1.25 5.00 -3.75 (VIOLATED) +_084_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__087__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_085_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__068__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_061_/A0 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__077__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_069_/B 1.25 5.00 -3.75 (VIOLATED) +_079_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__076__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_074_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__074__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__078__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_076_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__086__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__069__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_075_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__062__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_077_/B 1.25 5.00 -3.75 (VIOLATED) +_078_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__091__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_088_/B 1.25 5.00 -3.75 (VIOLATED) +_091_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__090__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__092__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__082__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_082_/B 1.25 5.00 -3.75 (VIOLATED) +_083_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__072__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_073_/B 1.25 5.00 -3.75 (VIOLATED) +_092_/B 1.25 5.00 -3.75 (VIOLATED) +_080_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__079__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__083__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_093_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__093__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_clock_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_clock/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input2_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_071_/B 1.25 5.00 -3.75 (VIOLATED) +_090_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input3_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__075__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__073__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__070__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_068_/B 1.25 5.00 -3.75 (VIOLATED) +input3/A 1.25 5.00 -3.75 (VIOLATED) +_070_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input5_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +input2/A 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_load/A 1.25 5.00 -3.75 (VIOLATED) +input5/A 1.25 5.00 -3.75 (VIOLATED) +input4/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input4_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_062_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_load_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input1_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__071__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_072_/B 1.25 5.00 -3.75 (VIOLATED) +input1/A 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[0] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[10] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[11] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[12] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[1] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[2] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[3] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[4] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[5] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[6] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[7] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[8] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[9] 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_out 1.25 5.00 -3.75 (VIOLATED) +pad_gpio_in 1.25 5.00 -3.75 (VIOLATED) +resetn 1.25 5.00 -3.75 (VIOLATED) +serial_clock 1.25 5.00 -3.75 (VIOLATED) +serial_data_in 1.25 5.00 -3.75 (VIOLATED) +serial_load 1.25 5.00 -3.75 (VIOLATED) +user_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +user_gpio_out 1.25 5.00 -3.75 (VIOLATED) + +max fanout + +Pin Limit Fanout Slack +--------------------------------------------------------- +clkbuf_1_0__f_serial_clock/X 7 9 -2 (VIOLATED) +clkbuf_1_1__f_serial_load/X 7 8 (VIOLATED) +fanout30/X 7 8 (VIOLATED) + + +=========================================================================== +max slew violation count 92 +max fanout violation count 3 +max cap violation count 0 +============================================================================ diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.tns.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.tns.rpt new file mode 100644 index 00000000..d3d84b63 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.tns.rpt @@ -0,0 +1,5 @@ + +=========================================================================== + report_tns +============================================================================ +tns 0.00 diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.wns.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.wns.rpt new file mode 100644 index 00000000..3b7f8643 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.wns.rpt @@ -0,0 +1,5 @@ + +=========================================================================== + report_wns +============================================================================ +wns 0.00 diff --git a/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.worst_slack.rpt b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.worst_slack.rpt new file mode 100644 index 00000000..59a4c514 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/32-rcx_sta.worst_slack.rpt @@ -0,0 +1,10 @@ + +=========================================================================== + report_worst_slack -max (Setup) +============================================================================ +worst slack 12.05 + +=========================================================================== + report_worst_slack -min (Hold) +============================================================================ +worst slack 0.30 diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.area.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.area.rpt new file mode 100644 index 00000000..64497ff6 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.area.rpt @@ -0,0 +1,5 @@ + +=========================================================================== + report_design_area +============================================================================ +Design area 2408 u^2 89% utilization. diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.clock_skew.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.clock_skew.rpt new file mode 100644 index 00000000..b199ad55 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.clock_skew.rpt @@ -0,0 +1,43 @@ + +=========================================================================== + report_clock_skew +============================================================================ + +======================== Slowest Corner ================================== + +Clock serial_clock +Latency CRPR Skew +_122_/CLK ^ + 1.62 +_123_/CLK ^ + 1.46 -0.12 0.04 + +Clock serial_load +No launch/capture paths found. + + +======================= Typical Corner =================================== + +Clock serial_clock +Latency CRPR Skew +_122_/CLK ^ + 0.85 +_123_/CLK ^ + 0.76 -0.06 0.02 + +Clock serial_load +No launch/capture paths found. + + +======================= Fastest Corner =================================== + +Clock serial_clock +Latency CRPR Skew +_122_/CLK ^ + 0.12 +_123_/CLK ^ + 0.11 -0.00 0.01 + +Clock serial_load +No launch/capture paths found. + diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.max.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.max.rpt new file mode 100644 index 00000000..494ca2a0 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.max.rpt @@ -0,0 +1,9883 @@ + +=========================================================================== +report_checks -path_delay max (Setup) +============================================================================ + +======================= Slowest Corner =================================== + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 ^ _072_/B (sky130_fd_sc_hd__or2_0) + 0.29 1.06 11.06 ^ _072_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _005_ (net) + 0.29 0.00 11.07 ^ _108_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.07 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.55 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 51.55 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.15 clock uncertainty + 0.00 51.15 clock reconvergence pessimism + -0.18 50.96 library recovery time + 50.96 data required time +----------------------------------------------------------------------------- + 50.96 data required time + -11.07 data arrival time +----------------------------------------------------------------------------- + 39.90 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.75 1.22 11.22 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.75 0.00 11.23 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.23 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 51.58 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.04 51.14 library recovery time + 51.14 data required time +----------------------------------------------------------------------------- + 51.14 data required time + -11.23 data arrival time +----------------------------------------------------------------------------- + 39.91 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 ^ _086_/B (sky130_fd_sc_hd__or2_0) + 0.29 1.07 11.07 ^ _086_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _019_ (net) + 0.29 0.00 11.07 ^ _115_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.07 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 51.58 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.18 51.00 library recovery time + 51.00 data required time +----------------------------------------------------------------------------- + 51.00 data required time + -11.07 data arrival time +----------------------------------------------------------------------------- + 39.93 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 v _079_/B (sky130_fd_sc_hd__nand2b_2) + 0.73 1.18 11.18 ^ _079_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _012_ (net) + 0.73 0.00 11.18 ^ _111_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.18 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.55 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 51.55 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.15 clock uncertainty + 0.00 51.15 clock reconvergence pessimism + -0.03 51.11 library recovery time + 51.11 data required time +----------------------------------------------------------------------------- + 51.11 data required time + -11.18 data arrival time +----------------------------------------------------------------------------- + 39.93 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 v _089_/B (sky130_fd_sc_hd__nand2b_2) + 0.72 1.16 11.16 ^ _089_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _022_ (net) + 0.72 0.00 11.16 ^ _116_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.16 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.54 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 51.54 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.03 51.11 library recovery time + 51.11 data required time +----------------------------------------------------------------------------- + 51.11 data required time + -11.16 data arrival time +----------------------------------------------------------------------------- + 39.95 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 ^ _080_/B (sky130_fd_sc_hd__or2_0) + 0.25 1.03 11.03 ^ _080_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _013_ (net) + 0.25 0.00 11.03 ^ _112_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.03 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.57 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.04 0.00 51.57 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.17 clock uncertainty + 0.00 51.17 clock reconvergence pessimism + -0.18 50.99 library recovery time + 50.99 data required time +----------------------------------------------------------------------------- + 50.99 data required time + -11.03 data arrival time +----------------------------------------------------------------------------- + 39.96 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 ^ _076_/B (sky130_fd_sc_hd__or2_0) + 0.26 1.04 11.04 ^ _076_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _009_ (net) + 0.26 0.00 11.04 ^ _110_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.04 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 51.58 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.17 51.00 library recovery time + 51.00 data required time +----------------------------------------------------------------------------- + 51.00 data required time + -11.04 data arrival time +----------------------------------------------------------------------------- + 39.96 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 ^ _088_/B (sky130_fd_sc_hd__or2_0) + 0.23 1.00 11.00 ^ _088_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _021_ (net) + 0.23 0.00 11.00 ^ _116_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.00 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.54 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 51.54 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.17 50.97 library recovery time + 50.97 data required time +----------------------------------------------------------------------------- + 50.97 data required time + -11.00 data arrival time +----------------------------------------------------------------------------- + 39.97 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 v _085_/B (sky130_fd_sc_hd__nand2b_2) + 0.73 1.18 11.18 ^ _085_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _018_ (net) + 0.73 0.00 11.18 ^ _114_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.18 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.09 51.58 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 51.58 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.03 51.15 library recovery time + 51.15 data required time +----------------------------------------------------------------------------- + 51.15 data required time + -11.18 data arrival time +----------------------------------------------------------------------------- + 39.97 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 ^ _078_/B (sky130_fd_sc_hd__or2_0) + 0.23 1.00 11.00 ^ _078_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _011_ (net) + 0.23 0.00 11.00 ^ _111_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.00 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.55 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 51.55 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.15 clock uncertainty + 0.00 51.15 clock reconvergence pessimism + -0.17 50.98 library recovery time + 50.98 data required time +----------------------------------------------------------------------------- + 50.98 data required time + -11.00 data arrival time +----------------------------------------------------------------------------- + 39.97 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 ^ _074_/B (sky130_fd_sc_hd__or2_0) + 0.23 1.00 11.00 ^ _074_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _007_ (net) + 0.23 0.00 11.00 ^ _109_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.00 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.56 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 51.56 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.16 clock uncertainty + 0.00 51.16 clock reconvergence pessimism + -0.17 50.99 library recovery time + 50.99 data required time +----------------------------------------------------------------------------- + 50.99 data required time + -11.00 data arrival time +----------------------------------------------------------------------------- + 39.98 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 ^ _084_/B (sky130_fd_sc_hd__or2_0) + 0.25 1.03 11.03 ^ _084_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _017_ (net) + 0.25 0.00 11.03 ^ _114_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.03 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.09 51.58 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 51.58 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.17 51.01 library recovery time + 51.01 data required time +----------------------------------------------------------------------------- + 51.01 data required time + -11.03 data arrival time +----------------------------------------------------------------------------- + 39.99 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 v _077_/B (sky130_fd_sc_hd__nand2b_2) + 0.72 1.16 11.16 ^ _077_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _010_ (net) + 0.72 0.00 11.16 ^ _110_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.16 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 51.58 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.03 51.15 library recovery time + 51.15 data required time +----------------------------------------------------------------------------- + 51.15 data required time + -11.16 data arrival time +----------------------------------------------------------------------------- + 39.99 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 v _069_/B (sky130_fd_sc_hd__nand2b_2) + 0.72 1.15 11.16 ^ _069_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _002_ (net) + 0.72 0.00 11.16 ^ _106_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.16 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.05 0.00 51.58 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.03 51.15 library recovery time + 51.15 data required time +----------------------------------------------------------------------------- + 51.15 data required time + -11.16 data arrival time +----------------------------------------------------------------------------- + 39.99 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 v _081_/B (sky130_fd_sc_hd__nand2b_2) + 0.70 1.12 11.12 ^ _081_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _014_ (net) + 0.70 0.00 11.12 ^ _112_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.12 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.57 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.04 0.00 51.57 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.17 clock uncertainty + 0.00 51.17 clock reconvergence pessimism + -0.03 51.14 library recovery time + 51.14 data required time +----------------------------------------------------------------------------- + 51.14 data required time + -11.12 data arrival time +----------------------------------------------------------------------------- + 40.01 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 ^ _090_/B (sky130_fd_sc_hd__or2_0) + 0.20 0.96 10.96 ^ _090_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _023_ (net) + 0.20 0.00 10.96 ^ _117_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.96 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 51.54 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 51.54 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.16 50.97 library recovery time + 50.97 data required time +----------------------------------------------------------------------------- + 50.97 data required time + -10.96 data arrival time +----------------------------------------------------------------------------- + 40.01 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 ^ _070_/B (sky130_fd_sc_hd__or2_0) + 0.21 0.98 10.98 ^ _070_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _003_ (net) + 0.21 0.00 10.98 ^ _107_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.98 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 51.58 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.16 51.02 library recovery time + 51.02 data required time +----------------------------------------------------------------------------- + 51.02 data required time + -10.98 data arrival time +----------------------------------------------------------------------------- + 40.04 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 v _073_/B (sky130_fd_sc_hd__nand2b_2) + 0.68 1.07 11.08 ^ _073_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _006_ (net) + 0.68 0.00 11.08 ^ _108_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.08 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.55 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 51.55 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.15 clock uncertainty + 0.00 51.15 clock reconvergence pessimism + -0.02 51.13 library recovery time + 51.13 data required time +----------------------------------------------------------------------------- + 51.13 data required time + -11.08 data arrival time +----------------------------------------------------------------------------- + 40.05 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 ^ _092_/B (sky130_fd_sc_hd__or2_0) + 0.18 0.93 10.93 ^ _092_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _025_ (net) + 0.18 0.00 10.93 ^ _118_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.93 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 51.54 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 51.54 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.16 50.98 library recovery time + 50.98 data required time +----------------------------------------------------------------------------- + 50.98 data required time + -10.93 data arrival time +----------------------------------------------------------------------------- + 40.05 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 v _091_/B (sky130_fd_sc_hd__nand2b_2) + 0.67 1.06 11.06 ^ _091_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _024_ (net) + 0.67 0.00 11.06 ^ _117_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.06 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 51.54 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 51.54 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.02 51.11 library recovery time + 51.11 data required time +----------------------------------------------------------------------------- + 51.11 data required time + -11.06 data arrival time +----------------------------------------------------------------------------- + 40.06 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 ^ _082_/B (sky130_fd_sc_hd__or2_0) + 0.18 0.93 10.93 ^ _082_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _015_ (net) + 0.18 0.00 10.93 ^ _113_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.93 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.54 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 51.54 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.16 50.99 library recovery time + 50.99 data required time +----------------------------------------------------------------------------- + 50.99 data required time + -10.93 data arrival time +----------------------------------------------------------------------------- + 40.06 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 ^ _068_/B (sky130_fd_sc_hd__or2_0) + 0.19 0.96 10.96 ^ _068_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _001_ (net) + 0.19 0.00 10.96 ^ _106_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.96 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.05 0.00 51.58 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.15 51.02 library recovery time + 51.02 data required time +----------------------------------------------------------------------------- + 51.02 data required time + -10.96 data arrival time +----------------------------------------------------------------------------- + 40.07 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 v _093_/B (sky130_fd_sc_hd__nand2b_2) + 0.66 1.03 11.03 ^ _093_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _026_ (net) + 0.66 0.00 11.03 ^ _118_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.03 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 51.54 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 51.54 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.02 51.12 library recovery time + 51.12 data required time +----------------------------------------------------------------------------- + 51.12 data required time + -11.03 data arrival time +----------------------------------------------------------------------------- + 40.08 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 v _075_/B (sky130_fd_sc_hd__nand2b_2) + 0.66 1.03 11.03 ^ _075_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _008_ (net) + 0.66 0.00 11.04 ^ _109_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.04 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.56 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 51.56 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.16 clock uncertainty + 0.00 51.16 clock reconvergence pessimism + -0.02 51.14 library recovery time + 51.14 data required time +----------------------------------------------------------------------------- + 51.14 data required time + -11.04 data arrival time +----------------------------------------------------------------------------- + 40.10 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 v _071_/B (sky130_fd_sc_hd__nand2b_2) + 0.67 1.05 11.05 ^ _071_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _004_ (net) + 0.67 0.00 11.05 ^ _107_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 51.58 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.02 51.16 library recovery time + 51.16 data required time +----------------------------------------------------------------------------- + 51.16 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 40.11 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 v _083_/B (sky130_fd_sc_hd__nand2b_2) + 0.63 0.99 10.99 ^ _083_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _016_ (net) + 0.63 0.00 10.99 ^ _113_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.99 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.54 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 51.54 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.01 51.13 library recovery time + 51.13 data required time +----------------------------------------------------------------------------- + 51.13 data required time + -10.99 data arrival time +----------------------------------------------------------------------------- + 40.14 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 1.68 26.68 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 26.68 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.07 0.34 27.01 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.07 0.00 27.02 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.09 0.11 27.13 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.09 0.00 27.13 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.13 0.93 28.05 v _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.13 0.00 28.05 v output21/A (sky130_fd_sc_hd__buf_16) + 0.22 0.42 28.48 v output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.22 0.01 28.48 v serial_data_out (out) + 28.48 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -28.48 data arrival time +----------------------------------------------------------------------------- + 11.12 slack (MET) + + +Startpoint: serial_load (clock source 'serial_load') +Endpoint: serial_load_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_load (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 25.00 v clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.67 26.67 v clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 26.67 v clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.36 27.03 v clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.09 0.00 27.03 v serial_load_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.28 0.46 27.49 v serial_load_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_load_out (net) + 0.29 0.03 27.53 v serial_load_out (out) + 27.53 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.53 data arrival time +----------------------------------------------------------------------------- + 12.07 slack (MET) + + +Startpoint: serial_clock (clock source 'serial_clock') +Endpoint: serial_clock_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 1.68 26.68 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 26.68 v clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.07 0.33 27.01 v clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.07 0.00 27.01 v serial_clock_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.28 0.46 27.47 v serial_clock_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_clock_out (net) + 0.28 0.02 27.49 v serial_clock_out (out) + 27.49 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.49 data arrival time +----------------------------------------------------------------------------- + 12.11 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.05 2.66 v _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.12 0.00 2.66 v _132_/D (sky130_fd_sc_hd__dfrtp_2) + 2.66 data arrival time + + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 1.52 26.52 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 26.52 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.07 0.30 26.82 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.07 0.00 26.82 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.09 0.10 26.92 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.09 0.00 26.92 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + -0.40 26.52 clock uncertainty + 0.12 26.65 clock reconvergence pessimism + -0.30 26.35 library setup time + 26.35 data required time +----------------------------------------------------------------------------- + 26.35 data required time + -2.66 data arrival time +----------------------------------------------------------------------------- + 23.69 slack (MET) + + +Startpoint: mgmt_gpio_oeb (input port clocked by serial_clock) +Endpoint: pad_gpio_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v mgmt_gpio_oeb (in) + 2 0.01 mgmt_gpio_oeb (net) + 5.00 0.00 10.00 v input1/A (sky130_fd_sc_hd__buf_2) + 0.17 1.54 11.54 v input1/X (sky130_fd_sc_hd__buf_2) + 2 0.01 net1 (net) + 0.17 0.00 11.54 v _063_/C (sky130_fd_sc_hd__and3b_2) + 0.11 0.57 12.10 v _063_/X (sky130_fd_sc_hd__and3b_2) + 2 0.01 _043_ (net) + 0.11 0.00 12.11 v _064_/B (sky130_fd_sc_hd__and2b_2) + 0.10 0.49 12.60 v _064_/X (sky130_fd_sc_hd__and2b_2) + 1 0.01 _044_ (net) + 0.10 0.00 12.60 v _066_/A1 (sky130_fd_sc_hd__o21ai_4) + 0.25 0.33 12.93 ^ _066_/Y (sky130_fd_sc_hd__o21ai_4) + 1 0.01 net16 (net) + 0.25 0.00 12.93 ^ output16/A (sky130_fd_sc_hd__buf_16) + 0.40 0.52 13.44 ^ output16/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_out (net) + 0.40 0.01 13.45 ^ pad_gpio_out (out) + 13.45 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -13.45 data arrival time +----------------------------------------------------------------------------- + 26.15 slack (MET) + + +Startpoint: mgmt_gpio_oeb (input port clocked by serial_clock) +Endpoint: pad_gpio_outenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v mgmt_gpio_oeb (in) + 2 0.01 mgmt_gpio_oeb (net) + 5.00 0.00 10.00 v input1/A (sky130_fd_sc_hd__buf_2) + 0.17 1.54 11.54 v input1/X (sky130_fd_sc_hd__buf_2) + 2 0.01 net1 (net) + 0.17 0.00 11.54 v _060_/B (sky130_fd_sc_hd__and2_0) + 0.08 0.37 11.90 v _060_/X (sky130_fd_sc_hd__and2_0) + 1 0.00 _041_ (net) + 0.08 0.00 11.90 v _061_/A1 (sky130_fd_sc_hd__mux2_4) + 0.20 0.55 12.45 v _061_/X (sky130_fd_sc_hd__mux2_4) + 1 0.01 net17 (net) + 0.20 0.00 12.45 v output17/A (sky130_fd_sc_hd__buf_16) + 0.22 0.45 12.90 v output17/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_outenb (net) + 0.22 0.02 12.92 v pad_gpio_outenb (out) + 12.92 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -12.92 data arrival time +----------------------------------------------------------------------------- + 26.68 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: user_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 v input3/A (sky130_fd_sc_hd__buf_2) + 0.15 1.50 11.50 v input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.15 0.00 11.50 v _067_/B (sky130_fd_sc_hd__and2_2) + 0.17 0.58 12.08 v _067_/X (sky130_fd_sc_hd__and2_2) + 1 0.03 net22 (net) + 0.17 0.00 12.08 v output22/A (sky130_fd_sc_hd__buf_16) + 0.22 0.44 12.52 v output22/X (sky130_fd_sc_hd__buf_16) + 1 0.25 user_gpio_in (net) + 0.22 0.01 12.52 v user_gpio_in (out) + 12.52 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -12.52 data arrival time +----------------------------------------------------------------------------- + 27.08 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: mgmt_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 v input3/A (sky130_fd_sc_hd__buf_2) + 0.15 1.50 11.50 v input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.15 0.00 11.50 v _133_/A (sky130_fd_sc_hd__buf_2) + 0.10 0.34 11.84 v _133_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net6 (net) + 0.10 0.00 11.84 v output6/A (sky130_fd_sc_hd__buf_16) + 0.22 0.40 12.24 v output6/X (sky130_fd_sc_hd__buf_16) + 1 0.25 mgmt_gpio_in (net) + 0.22 0.01 12.25 v mgmt_gpio_in (out) + 12.25 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -12.25 data arrival time +----------------------------------------------------------------------------- + 27.35 slack (MET) + + +Startpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[1] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.10 1.75 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 1.75 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.13 1.35 3.10 v _114_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net11 (net) + 0.13 0.00 3.10 v output11/A (sky130_fd_sc_hd__buf_16) + 0.22 0.42 3.52 v output11/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[1] (net) + 0.22 0.01 3.52 v pad_gpio_dm[1] (out) + 3.52 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.52 data arrival time +----------------------------------------------------------------------------- + 36.08 slack (MET) + + +Startpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[2] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 1.74 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.12 1.34 3.09 v _115_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net12 (net) + 0.12 0.00 3.09 v output12/A (sky130_fd_sc_hd__buf_16) + 0.22 0.41 3.49 v output12/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[2] (net) + 0.22 0.02 3.51 v pad_gpio_dm[2] (out) + 3.51 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.51 data arrival time +----------------------------------------------------------------------------- + 36.09 slack (MET) + + +Startpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_holdover (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 1.74 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 1.34 3.08 v _107_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net13 (net) + 0.11 0.00 3.08 v output13/A (sky130_fd_sc_hd__buf_16) + 0.22 0.40 3.48 v output13/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_holdover (net) + 0.22 0.02 3.50 v pad_gpio_holdover (out) + 3.50 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.50 data arrival time +----------------------------------------------------------------------------- + 36.10 slack (MET) + + +Startpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_inenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 1.74 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 1.34 3.08 v _110_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net15 (net) + 0.11 0.00 3.08 v output15/A (sky130_fd_sc_hd__buf_16) + 0.22 0.41 3.49 v output15/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_inenb (net) + 0.22 0.01 3.50 v pad_gpio_inenb (out) + 3.50 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.50 data arrival time +----------------------------------------------------------------------------- + 36.10 slack (MET) + + +Startpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_vtrip_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.72 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 1.72 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 1.32 3.04 v _109_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net19 (net) + 0.11 0.00 3.04 v output19/A (sky130_fd_sc_hd__buf_16) + 0.22 0.41 3.45 v output19/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_vtrip_sel (net) + 0.22 0.01 3.46 v pad_gpio_vtrip_sel (out) + 3.46 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.46 data arrival time +----------------------------------------------------------------------------- + 36.14 slack (MET) + + +Startpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_en (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 1.71 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 1.32 3.03 v _116_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net7 (net) + 0.11 0.00 3.03 v output7/A (sky130_fd_sc_hd__buf_16) + 0.22 0.40 3.43 v output7/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_en (net) + 0.22 0.02 3.45 v pad_gpio_ana_en (out) + 3.45 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.45 data arrival time +----------------------------------------------------------------------------- + 36.15 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[0] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.70 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 1.70 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 1.33 3.03 v _113_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net10 (net) + 0.11 0.00 3.03 v output10/A (sky130_fd_sc_hd__buf_16) + 0.22 0.41 3.44 v output10/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[0] (net) + 0.22 0.01 3.45 v pad_gpio_dm[0] (out) + 3.45 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.45 data arrival time +----------------------------------------------------------------------------- + 36.15 slack (MET) + + +Startpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_slow_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.09 1.71 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 1.71 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 1.32 3.03 v _108_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net18 (net) + 0.11 0.00 3.03 v output18/A (sky130_fd_sc_hd__buf_16) + 0.22 0.41 3.44 v output18/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_slow_sel (net) + 0.22 0.01 3.45 v pad_gpio_slow_sel (out) + 3.45 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.45 data arrival time +----------------------------------------------------------------------------- + 36.15 slack (MET) + + +Startpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ib_mode_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 1.71 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 1.32 3.03 v _111_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net14 (net) + 0.10 0.00 3.03 v output14/A (sky130_fd_sc_hd__buf_16) + 0.22 0.40 3.43 v output14/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ib_mode_sel (net) + 0.22 0.02 3.45 v pad_gpio_ib_mode_sel (out) + 3.45 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.45 data arrival time +----------------------------------------------------------------------------- + 36.15 slack (MET) + + +Startpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_pol (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 1.70 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 1.31 3.01 v _118_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net8 (net) + 0.10 0.00 3.01 v output8/A (sky130_fd_sc_hd__buf_16) + 0.22 0.41 3.42 v output8/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_pol (net) + 0.22 0.01 3.43 v pad_gpio_ana_pol (out) + 3.43 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.43 data arrival time +----------------------------------------------------------------------------- + 36.17 slack (MET) + + +Startpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 1.70 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 1.31 3.01 v _117_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net9 (net) + 0.10 0.00 3.01 v output9/A (sky130_fd_sc_hd__buf_16) + 0.22 0.40 3.40 v output9/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_sel (net) + 0.22 0.02 3.42 v pad_gpio_ana_sel (out) + 3.42 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.42 data arrival time +----------------------------------------------------------------------------- + 36.18 slack (MET) + + +Startpoint: resetn (input port) +Endpoint: resetn_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 v input external delay + 5.00 0.00 0.00 v resetn (in) + 2 0.01 resetn (net) + 5.00 0.00 0.00 v input4/A (sky130_fd_sc_hd__buf_2) + 0.16 1.52 1.52 v input4/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net4 (net) + 0.16 0.00 1.52 v fanout31/A (sky130_fd_sc_hd__buf_2) + 0.12 0.37 1.88 v fanout31/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net31 (net) + 0.12 0.00 1.88 v fanout30/A (sky130_fd_sc_hd__buf_2) + 0.15 0.37 2.26 v fanout30/X (sky130_fd_sc_hd__buf_2) + 8 0.03 net30 (net) + 0.15 0.00 2.26 v fanout29/A (sky130_fd_sc_hd__buf_2) + 0.11 0.35 2.61 v fanout29/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net29 (net) + 0.11 0.00 2.61 v _134_/A (sky130_fd_sc_hd__buf_2) + 0.10 0.33 2.94 v _134_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net20 (net) + 0.10 0.00 2.94 v output20/A (sky130_fd_sc_hd__buf_16) + 0.22 0.41 3.34 v output20/X (sky130_fd_sc_hd__buf_16) + 1 0.25 resetn_out (net) + 0.22 0.01 3.35 v resetn_out (out) + 3.35 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -3.35 data arrival time +----------------------------------------------------------------------------- + 36.25 slack (MET) + + +Startpoint: serial_data_in (input port clocked by serial_clock) +Endpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v serial_data_in (in) + 2 0.01 serial_data_in (net) + 5.00 0.00 10.00 v input5/A (sky130_fd_sc_hd__buf_2) + 0.19 1.58 11.58 v input5/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net5 (net) + 0.19 0.00 11.58 v _119_/D (sky130_fd_sc_hd__dfrtp_4) + 11.58 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 51.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 51.46 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.06 clock uncertainty + 0.00 51.06 clock reconvergence pessimism + -0.32 50.74 library setup time + 50.74 data required time +----------------------------------------------------------------------------- + 50.74 data required time + -11.58 data arrival time +----------------------------------------------------------------------------- + 39.16 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.05 2.67 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.12 0.00 2.67 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.18 1.31 3.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.18 0.00 3.98 v _122_/D (sky130_fd_sc_hd__dfrtp_4) + 3.98 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.15 51.22 clock reconvergence pessimism + -0.32 50.90 library setup time + 50.90 data required time +----------------------------------------------------------------------------- + 50.90 data required time + -3.98 data arrival time +----------------------------------------------------------------------------- + 46.92 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.04 2.66 v _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.12 0.00 2.66 v hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.16 1.28 3.94 v hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.16 0.00 3.94 v _123_/D (sky130_fd_sc_hd__dfrtp_4) + 3.94 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 51.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 51.46 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.06 clock uncertainty + 0.12 51.18 clock reconvergence pessimism + -0.31 50.87 library setup time + 50.87 data required time +----------------------------------------------------------------------------- + 50.87 data required time + -3.94 data arrival time +----------------------------------------------------------------------------- + 46.93 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 1.01 2.62 v _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.11 0.00 2.62 v hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.19 1.31 3.93 v hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.19 0.00 3.93 v _130_/D (sky130_fd_sc_hd__dfrtp_4) + 3.93 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.12 51.19 clock reconvergence pessimism + -0.32 50.87 library setup time + 50.87 data required time +----------------------------------------------------------------------------- + 50.87 data required time + -3.93 data arrival time +----------------------------------------------------------------------------- + 46.94 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.04 2.66 v _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.12 0.00 2.66 v hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.29 3.96 v hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.17 0.00 3.96 v _121_/D (sky130_fd_sc_hd__dfrtp_4) + 3.96 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.15 51.22 clock reconvergence pessimism + -0.31 50.91 library setup time + 50.91 data required time +----------------------------------------------------------------------------- + 50.91 data required time + -3.96 data arrival time +----------------------------------------------------------------------------- + 46.95 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.00 2.61 v _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.10 0.00 2.61 v hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.16 1.27 3.89 v hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.16 0.00 3.89 v _120_/D (sky130_fd_sc_hd__dfrtp_4) + 3.89 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.12 51.19 clock reconvergence pessimism + -0.31 50.88 library setup time + 50.88 data required time +----------------------------------------------------------------------------- + 50.88 data required time + -3.89 data arrival time +----------------------------------------------------------------------------- + 46.99 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 1.01 2.64 v _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.11 0.00 2.64 v hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.14 1.24 3.88 v hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.14 0.00 3.88 v _128_/D (sky130_fd_sc_hd__dfrtp_4) + 3.88 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 51.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 51.46 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.06 clock uncertainty + 0.12 51.18 clock reconvergence pessimism + -0.30 50.88 library setup time + 50.88 data required time +----------------------------------------------------------------------------- + 50.88 data required time + -3.88 data arrival time +----------------------------------------------------------------------------- + 47.01 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.62 v _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.10 0.00 2.62 v hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.16 1.27 3.89 v hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.16 0.00 3.89 v _129_/D (sky130_fd_sc_hd__dfrtp_4) + 3.89 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 51.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 51.46 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.06 clock uncertainty + 0.15 51.21 clock reconvergence pessimism + -0.31 50.90 library setup time + 50.90 data required time +----------------------------------------------------------------------------- + 50.90 data required time + -3.89 data arrival time +----------------------------------------------------------------------------- + 47.01 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.63 v _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.10 0.00 2.63 v hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.23 3.86 v hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.00 net49 (net) + 0.13 0.00 3.86 v _131_/D (sky130_fd_sc_hd__dfrtp_4) + 3.86 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 51.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 51.46 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.06 clock uncertainty + 0.12 51.18 clock reconvergence pessimism + -0.30 50.89 library setup time + 50.89 data required time +----------------------------------------------------------------------------- + 50.89 data required time + -3.86 data arrival time +----------------------------------------------------------------------------- + 47.03 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.63 v _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.10 0.00 2.63 v hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.15 1.26 3.89 v hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.15 0.00 3.89 v _125_/D (sky130_fd_sc_hd__dfrtp_4) + 3.89 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.15 51.22 clock reconvergence pessimism + -0.30 50.92 library setup time + 50.92 data required time +----------------------------------------------------------------------------- + 50.92 data required time + -3.89 data arrival time +----------------------------------------------------------------------------- + 47.03 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.62 v _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.10 0.00 2.62 v hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.24 3.86 v hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.13 0.00 3.86 v _124_/D (sky130_fd_sc_hd__dfrtp_4) + 3.86 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.12 51.19 clock reconvergence pessimism + -0.30 50.89 library setup time + 50.89 data required time +----------------------------------------------------------------------------- + 50.89 data required time + -3.86 data arrival time +----------------------------------------------------------------------------- + 47.03 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 1.01 2.63 v _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.11 0.00 2.63 v hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.24 3.87 v hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.13 0.00 3.87 v _127_/D (sky130_fd_sc_hd__dfrtp_4) + 3.87 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.15 51.22 clock reconvergence pessimism + -0.30 50.92 library setup time + 50.92 data required time +----------------------------------------------------------------------------- + 50.92 data required time + -3.87 data arrival time +----------------------------------------------------------------------------- + 47.05 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.63 v _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.10 0.00 2.63 v hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.14 1.24 3.87 v hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.14 0.00 3.87 v _126_/D (sky130_fd_sc_hd__dfrtp_4) + 3.87 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 51.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 51.47 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 51.07 clock uncertainty + 0.15 51.22 clock reconvergence pessimism + -0.30 50.92 library setup time + 50.92 data required time +----------------------------------------------------------------------------- + 50.92 data required time + -3.87 data arrival time +----------------------------------------------------------------------------- + 47.05 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.05 2.67 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.12 0.00 2.67 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.18 1.31 3.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.18 0.00 3.98 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 3.98 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 51.58 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.41 50.77 library setup time + 50.77 data required time +----------------------------------------------------------------------------- + 50.77 data required time + -3.98 data arrival time +----------------------------------------------------------------------------- + 46.79 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 1.01 2.62 v _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.11 0.00 2.62 v hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.19 1.31 3.93 v hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.19 0.00 3.93 v _113_/D (sky130_fd_sc_hd__dfbbn_2) + 3.93 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.54 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 51.54 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.41 50.73 library setup time + 50.73 data required time +----------------------------------------------------------------------------- + 50.73 data required time + -3.93 data arrival time +----------------------------------------------------------------------------- + 46.80 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _112_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.04 2.66 v _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.12 0.00 2.66 v hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.29 3.96 v hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.17 0.00 3.96 v _112_/D (sky130_fd_sc_hd__dfbbn_2) + 3.96 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.57 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.04 0.00 51.57 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.17 clock uncertainty + 0.00 51.17 clock reconvergence pessimism + -0.40 50.76 library setup time + 50.76 data required time +----------------------------------------------------------------------------- + 50.76 data required time + -3.96 data arrival time +----------------------------------------------------------------------------- + 46.81 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.04 2.66 v _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.12 0.00 2.66 v hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.16 1.28 3.94 v hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.16 0.00 3.94 v _110_/D (sky130_fd_sc_hd__dfbbn_2) + 3.94 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 51.58 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.40 50.78 library setup time + 50.78 data required time +----------------------------------------------------------------------------- + 50.78 data required time + -3.94 data arrival time +----------------------------------------------------------------------------- + 46.84 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.63 v _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.10 0.00 2.63 v hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.15 1.26 3.89 v hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.15 0.00 3.89 v _116_/D (sky130_fd_sc_hd__dfbbn_2) + 3.89 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.54 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 51.54 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.39 50.75 library setup time + 50.75 data required time +----------------------------------------------------------------------------- + 50.75 data required time + -3.89 data arrival time +----------------------------------------------------------------------------- + 46.86 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.62 v _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.10 0.00 2.62 v hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.16 1.27 3.89 v hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.16 0.00 3.89 v _109_/D (sky130_fd_sc_hd__dfbbn_2) + 3.89 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 51.56 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 51.56 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.16 clock uncertainty + 0.00 51.16 clock reconvergence pessimism + -0.40 50.76 library setup time + 50.76 data required time +----------------------------------------------------------------------------- + 50.76 data required time + -3.89 data arrival time +----------------------------------------------------------------------------- + 46.87 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 1.01 2.63 v _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.11 0.00 2.63 v hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.24 3.87 v hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.13 0.00 3.87 v _118_/D (sky130_fd_sc_hd__dfbbn_2) + 3.87 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 51.54 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 51.54 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.39 50.75 library setup time + 50.75 data required time +----------------------------------------------------------------------------- + 50.75 data required time + -3.87 data arrival time +----------------------------------------------------------------------------- + 46.88 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.63 v _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.10 0.00 2.63 v hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.14 1.24 3.87 v hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.14 0.00 3.87 v _117_/D (sky130_fd_sc_hd__dfbbn_2) + 3.87 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 51.54 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 51.54 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.14 clock uncertainty + 0.00 51.14 clock reconvergence pessimism + -0.39 50.75 library setup time + 50.75 data required time +----------------------------------------------------------------------------- + 50.75 data required time + -3.87 data arrival time +----------------------------------------------------------------------------- + 46.88 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 1.01 2.64 v _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.11 0.00 2.64 v hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.14 1.24 3.88 v hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.14 0.00 3.88 v _108_/D (sky130_fd_sc_hd__dfbbn_2) + 3.88 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.55 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 51.55 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.15 clock uncertainty + 0.00 51.15 clock reconvergence pessimism + -0.39 50.76 library setup time + 50.76 data required time +----------------------------------------------------------------------------- + 50.76 data required time + -3.88 data arrival time +----------------------------------------------------------------------------- + 46.88 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.00 2.61 v _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.10 0.00 2.61 v hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.16 1.27 3.89 v hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.16 0.00 3.89 v _106_/D (sky130_fd_sc_hd__dfbbn_2) + 3.89 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.05 0.00 51.58 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.40 50.78 library setup time + 50.78 data required time +----------------------------------------------------------------------------- + 50.78 data required time + -3.89 data arrival time +----------------------------------------------------------------------------- + 46.89 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.62 v _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.10 0.00 2.62 v hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.24 3.86 v hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.13 0.00 3.86 v _111_/D (sky130_fd_sc_hd__dfbbn_2) + 3.86 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.55 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 51.55 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.15 clock uncertainty + 0.00 51.15 clock reconvergence pessimism + -0.39 50.76 library setup time + 50.76 data required time +----------------------------------------------------------------------------- + 50.76 data required time + -3.86 data arrival time +----------------------------------------------------------------------------- + 46.90 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.05 2.66 v _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.12 0.00 2.66 v hold3/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.10 1.20 3.86 v hold3/X (sky130_fd_sc_hd__dlygate4sd3_1) + 1 0.00 net48 (net) + 0.10 0.00 3.86 v _115_/D (sky130_fd_sc_hd__dfbbn_2) + 3.86 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 51.58 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.37 50.80 library setup time + 50.80 data required time +----------------------------------------------------------------------------- + 50.80 data required time + -3.86 data arrival time +----------------------------------------------------------------------------- + 46.94 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 1.01 2.63 v _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.10 0.00 2.63 v hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.23 3.86 v hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.00 net49 (net) + 0.13 0.00 3.86 v _114_/D (sky130_fd_sc_hd__dfbbn_2) + 3.86 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.09 51.58 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 51.58 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.38 50.80 library setup time + 50.80 data required time +----------------------------------------------------------------------------- + 50.80 data required time + -3.86 data arrival time +----------------------------------------------------------------------------- + 46.94 slack (MET) + + + +======================= Typical Corner =================================== + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.73 1.27 11.27 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.73 0.00 11.27 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.27 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 50.82 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.05 50.37 library recovery time + 50.37 data required time +----------------------------------------------------------------------------- + 50.37 data required time + -11.27 data arrival time +----------------------------------------------------------------------------- + 39.11 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 v _079_/B (sky130_fd_sc_hd__nand2b_2) + 0.70 1.22 11.22 ^ _079_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _012_ (net) + 0.70 0.00 11.22 ^ _111_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.22 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.80 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 50.81 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.05 50.36 library recovery time + 50.36 data required time +----------------------------------------------------------------------------- + 50.36 data required time + -11.22 data arrival time +----------------------------------------------------------------------------- + 39.14 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 v _089_/B (sky130_fd_sc_hd__nand2b_2) + 0.68 1.20 11.20 ^ _089_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _022_ (net) + 0.68 0.00 11.20 ^ _116_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.20 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 50.80 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.80 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.05 50.36 library recovery time + 50.36 data required time +----------------------------------------------------------------------------- + 50.36 data required time + -11.20 data arrival time +----------------------------------------------------------------------------- + 39.16 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 v _085_/B (sky130_fd_sc_hd__nand2b_2) + 0.70 1.22 11.22 ^ _085_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _018_ (net) + 0.70 0.00 11.22 ^ _114_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.22 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 50.83 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 50.83 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.43 clock uncertainty + 0.00 50.43 clock reconvergence pessimism + -0.04 50.38 library recovery time + 50.38 data required time +----------------------------------------------------------------------------- + 50.38 data required time + -11.22 data arrival time +----------------------------------------------------------------------------- + 39.16 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 v _077_/B (sky130_fd_sc_hd__nand2b_2) + 0.68 1.20 11.20 ^ _077_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _010_ (net) + 0.68 0.00 11.20 ^ _110_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.20 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.82 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.04 50.38 library recovery time + 50.38 data required time +----------------------------------------------------------------------------- + 50.38 data required time + -11.20 data arrival time +----------------------------------------------------------------------------- + 39.18 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 v _069_/B (sky130_fd_sc_hd__nand2b_2) + 0.68 1.19 11.19 ^ _069_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _002_ (net) + 0.68 0.00 11.19 ^ _106_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.19 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 50.82 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.04 50.38 library recovery time + 50.38 data required time +----------------------------------------------------------------------------- + 50.38 data required time + -11.19 data arrival time +----------------------------------------------------------------------------- + 39.19 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 v _081_/B (sky130_fd_sc_hd__nand2b_2) + 0.66 1.16 11.16 ^ _081_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _014_ (net) + 0.66 0.00 11.16 ^ _112_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.16 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.03 0.00 50.82 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.04 50.37 library recovery time + 50.37 data required time +----------------------------------------------------------------------------- + 50.37 data required time + -11.16 data arrival time +----------------------------------------------------------------------------- + 39.21 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 v _073_/B (sky130_fd_sc_hd__nand2b_2) + 0.63 1.11 11.11 ^ _073_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _006_ (net) + 0.63 0.00 11.11 ^ _108_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.11 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.81 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 50.81 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.04 50.37 library recovery time + 50.37 data required time +----------------------------------------------------------------------------- + 50.37 data required time + -11.11 data arrival time +----------------------------------------------------------------------------- + 39.25 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 v _091_/B (sky130_fd_sc_hd__nand2b_2) + 0.62 1.10 11.10 ^ _091_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _024_ (net) + 0.62 0.00 11.10 ^ _117_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.10 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 50.80 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.04 50.36 library recovery time + 50.36 data required time +----------------------------------------------------------------------------- + 50.36 data required time + -11.10 data arrival time +----------------------------------------------------------------------------- + 39.26 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 v _093_/B (sky130_fd_sc_hd__nand2b_2) + 0.61 1.08 11.08 ^ _093_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _026_ (net) + 0.61 0.00 11.08 ^ _118_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.08 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 50.80 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.04 50.36 library recovery time + 50.36 data required time +----------------------------------------------------------------------------- + 50.36 data required time + -11.08 data arrival time +----------------------------------------------------------------------------- + 39.28 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 v _075_/B (sky130_fd_sc_hd__nand2b_2) + 0.61 1.08 11.08 ^ _075_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _008_ (net) + 0.61 0.00 11.08 ^ _109_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.08 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.81 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 50.81 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.04 50.37 library recovery time + 50.37 data required time +----------------------------------------------------------------------------- + 50.37 data required time + -11.08 data arrival time +----------------------------------------------------------------------------- + 39.29 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 v _071_/B (sky130_fd_sc_hd__nand2b_2) + 0.63 1.09 11.09 ^ _071_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _004_ (net) + 0.63 0.00 11.09 ^ _107_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.09 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.82 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.04 50.39 library recovery time + 50.39 data required time +----------------------------------------------------------------------------- + 50.39 data required time + -11.09 data arrival time +----------------------------------------------------------------------------- + 39.29 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 v _083_/B (sky130_fd_sc_hd__nand2b_2) + 0.60 1.05 11.05 ^ _083_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _016_ (net) + 0.60 0.00 11.05 ^ _113_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 50.80 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.04 50.36 library recovery time + 50.36 data required time +----------------------------------------------------------------------------- + 50.36 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 39.31 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 ^ _072_/B (sky130_fd_sc_hd__or2_0) + 0.17 0.38 10.38 ^ _072_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _005_ (net) + 0.17 0.00 10.38 ^ _108_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.38 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.81 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 50.81 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.11 50.30 library recovery time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -10.38 data arrival time +----------------------------------------------------------------------------- + 39.92 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 ^ _086_/B (sky130_fd_sc_hd__or2_0) + 0.17 0.38 10.38 ^ _086_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _019_ (net) + 0.17 0.00 10.38 ^ _115_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.38 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 50.82 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.10 50.32 library recovery time + 50.32 data required time +----------------------------------------------------------------------------- + 50.32 data required time + -10.38 data arrival time +----------------------------------------------------------------------------- + 39.94 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 ^ _080_/B (sky130_fd_sc_hd__or2_0) + 0.16 0.36 10.36 ^ _080_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _013_ (net) + 0.16 0.00 10.36 ^ _112_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.36 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.03 0.00 50.82 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.10 50.31 library recovery time + 50.31 data required time +----------------------------------------------------------------------------- + 50.31 data required time + -10.36 data arrival time +----------------------------------------------------------------------------- + 39.95 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 ^ _088_/B (sky130_fd_sc_hd__or2_0) + 0.15 0.35 10.35 ^ _088_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _021_ (net) + 0.15 0.00 10.35 ^ _116_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.35 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 50.80 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.80 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.10 50.30 library recovery time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -10.35 data arrival time +----------------------------------------------------------------------------- + 39.95 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 ^ _076_/B (sky130_fd_sc_hd__or2_0) + 0.16 0.37 10.37 ^ _076_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _009_ (net) + 0.16 0.00 10.37 ^ _110_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.37 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.82 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.10 50.32 library recovery time + 50.32 data required time +----------------------------------------------------------------------------- + 50.32 data required time + -10.37 data arrival time +----------------------------------------------------------------------------- + 39.95 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 ^ _078_/B (sky130_fd_sc_hd__or2_0) + 0.15 0.35 10.35 ^ _078_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _011_ (net) + 0.15 0.00 10.35 ^ _111_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.35 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.80 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 50.81 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.10 50.30 library recovery time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -10.35 data arrival time +----------------------------------------------------------------------------- + 39.95 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 ^ _074_/B (sky130_fd_sc_hd__or2_0) + 0.15 0.35 10.35 ^ _074_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _007_ (net) + 0.15 0.00 10.35 ^ _109_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.35 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.81 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 50.81 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.10 50.31 library recovery time + 50.31 data required time +----------------------------------------------------------------------------- + 50.31 data required time + -10.35 data arrival time +----------------------------------------------------------------------------- + 39.96 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 ^ _084_/B (sky130_fd_sc_hd__or2_0) + 0.16 0.36 10.36 ^ _084_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _017_ (net) + 0.16 0.00 10.36 ^ _114_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.36 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 50.83 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 50.83 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.43 clock uncertainty + 0.00 50.43 clock reconvergence pessimism + -0.10 50.33 library recovery time + 50.33 data required time +----------------------------------------------------------------------------- + 50.33 data required time + -10.36 data arrival time +----------------------------------------------------------------------------- + 39.96 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 ^ _090_/B (sky130_fd_sc_hd__or2_0) + 0.14 0.32 10.32 ^ _090_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _023_ (net) + 0.14 0.00 10.32 ^ _117_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.32 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 50.80 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.10 50.30 library recovery time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -10.32 data arrival time +----------------------------------------------------------------------------- + 39.97 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 ^ _092_/B (sky130_fd_sc_hd__or2_0) + 0.14 0.31 10.31 ^ _092_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _025_ (net) + 0.14 0.00 10.31 ^ _118_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.31 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 50.80 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.10 50.30 library recovery time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -10.31 data arrival time +----------------------------------------------------------------------------- + 39.99 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 ^ _082_/B (sky130_fd_sc_hd__or2_0) + 0.14 0.31 10.31 ^ _082_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _015_ (net) + 0.14 0.00 10.31 ^ _113_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.31 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 50.80 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.10 50.30 library recovery time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -10.31 data arrival time +----------------------------------------------------------------------------- + 39.99 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 ^ _070_/B (sky130_fd_sc_hd__or2_0) + 0.15 0.33 10.33 ^ _070_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _003_ (net) + 0.15 0.00 10.33 ^ _107_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.33 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.82 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.10 50.33 library recovery time + 50.33 data required time +----------------------------------------------------------------------------- + 50.33 data required time + -10.33 data arrival time +----------------------------------------------------------------------------- + 39.99 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 ^ _068_/B (sky130_fd_sc_hd__or2_0) + 0.14 0.32 10.32 ^ _068_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _001_ (net) + 0.14 0.00 10.32 ^ _106_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.32 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 50.82 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.10 50.33 library recovery time + 50.33 data required time +----------------------------------------------------------------------------- + 50.33 data required time + -10.32 data arrival time +----------------------------------------------------------------------------- + 40.01 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.54 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.22 26.77 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.77 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.07 26.84 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.84 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.10 0.41 27.25 ^ _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.10 0.00 27.25 ^ output21/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 27.54 ^ output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.27 0.01 27.55 ^ serial_data_out (out) + 27.55 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.55 data arrival time +----------------------------------------------------------------------------- + 12.05 slack (MET) + + +Startpoint: serial_load (clock source 'serial_load') +Endpoint: serial_load_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_load (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 25.00 v clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 26.54 v clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.23 26.77 v clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 26.77 v serial_load_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.26 27.03 v serial_load_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_load_out (net) + 0.18 0.03 27.06 v serial_load_out (out) + 27.06 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.06 data arrival time +----------------------------------------------------------------------------- + 12.54 slack (MET) + + +Startpoint: serial_clock (clock source 'serial_clock') +Endpoint: serial_clock_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.54 v clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.22 26.76 v clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 26.76 v serial_clock_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.26 27.03 v serial_clock_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_clock_out (net) + 0.18 0.02 27.04 v serial_clock_out (out) + 27.04 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.04 data arrival time +----------------------------------------------------------------------------- + 12.56 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.34 v _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.06 0.00 1.34 v _132_/D (sky130_fd_sc_hd__dfrtp_2) + 1.34 data arrival time + + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.40 26.40 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.40 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.20 26.60 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.60 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.06 26.66 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.66 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + -0.40 26.26 clock uncertainty + 0.06 26.32 clock reconvergence pessimism + -0.12 26.20 library setup time + 26.20 data required time +----------------------------------------------------------------------------- + 26.20 data required time + -1.34 data arrival time +----------------------------------------------------------------------------- + 24.86 slack (MET) + + +Startpoint: mgmt_gpio_oeb (input port clocked by serial_clock) +Endpoint: pad_gpio_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v mgmt_gpio_oeb (in) + 2 0.01 mgmt_gpio_oeb (net) + 5.00 0.00 10.00 v input1/A (sky130_fd_sc_hd__buf_2) + 0.16 1.31 11.31 v input1/X (sky130_fd_sc_hd__buf_2) + 2 0.01 net1 (net) + 0.16 0.00 11.31 v _063_/C (sky130_fd_sc_hd__and3b_2) + 0.06 0.30 11.62 v _063_/X (sky130_fd_sc_hd__and3b_2) + 2 0.01 _043_ (net) + 0.06 0.00 11.62 v _064_/B (sky130_fd_sc_hd__and2b_2) + 0.05 0.23 11.85 v _064_/X (sky130_fd_sc_hd__and2b_2) + 1 0.01 _044_ (net) + 0.05 0.00 11.85 v _066_/A1 (sky130_fd_sc_hd__o21ai_4) + 0.17 0.20 12.04 ^ _066_/Y (sky130_fd_sc_hd__o21ai_4) + 1 0.02 net16 (net) + 0.17 0.00 12.04 ^ output16/A (sky130_fd_sc_hd__buf_16) + 0.27 0.31 12.35 ^ output16/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_out (net) + 0.27 0.01 12.36 ^ pad_gpio_out (out) + 12.36 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -12.36 data arrival time +----------------------------------------------------------------------------- + 27.24 slack (MET) + + +Startpoint: user_gpio_oeb (input port clocked by serial_clock) +Endpoint: pad_gpio_outenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v user_gpio_oeb (in) + 2 0.02 user_gpio_oeb (net) + 5.00 0.00 10.00 v _061_/A0 (sky130_fd_sc_hd__mux2_4) + 0.20 1.93 11.94 v _061_/X (sky130_fd_sc_hd__mux2_4) + 1 0.01 net17 (net) + 0.20 0.00 11.94 v output17/A (sky130_fd_sc_hd__buf_16) + 0.14 0.30 12.23 v output17/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_outenb (net) + 0.15 0.02 12.25 v pad_gpio_outenb (out) + 12.25 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -12.25 data arrival time +----------------------------------------------------------------------------- + 27.35 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: user_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 v input3/A (sky130_fd_sc_hd__buf_2) + 0.15 1.28 11.28 v input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.15 0.00 11.28 v _067_/B (sky130_fd_sc_hd__and2_2) + 0.09 0.31 11.59 v _067_/X (sky130_fd_sc_hd__and2_2) + 1 0.03 net22 (net) + 0.09 0.00 11.59 v output22/A (sky130_fd_sc_hd__buf_16) + 0.14 0.25 11.84 v output22/X (sky130_fd_sc_hd__buf_16) + 1 0.25 user_gpio_in (net) + 0.14 0.01 11.85 v user_gpio_in (out) + 11.85 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -11.85 data arrival time +----------------------------------------------------------------------------- + 27.75 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: mgmt_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 v input3/A (sky130_fd_sc_hd__buf_2) + 0.15 1.28 11.28 v input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.15 0.00 11.28 v _133_/A (sky130_fd_sc_hd__buf_2) + 0.05 0.20 11.48 v _133_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net6 (net) + 0.05 0.00 11.48 v output6/A (sky130_fd_sc_hd__buf_16) + 0.14 0.23 11.71 v output6/X (sky130_fd_sc_hd__buf_16) + 1 0.25 mgmt_gpio_in (net) + 0.14 0.01 11.72 v mgmt_gpio_in (out) + 11.72 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -11.72 data arrival time +----------------------------------------------------------------------------- + 27.88 slack (MET) + + +Startpoint: resetn (input port) +Endpoint: resetn_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 v input external delay + 5.00 0.00 0.00 v resetn (in) + 2 0.01 resetn (net) + 5.00 0.00 0.00 v input4/A (sky130_fd_sc_hd__buf_2) + 0.15 1.29 1.29 v input4/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net4 (net) + 0.15 0.00 1.29 v fanout31/A (sky130_fd_sc_hd__buf_2) + 0.06 0.21 1.50 v fanout31/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net31 (net) + 0.06 0.00 1.51 v fanout30/A (sky130_fd_sc_hd__buf_2) + 0.08 0.19 1.69 v fanout30/X (sky130_fd_sc_hd__buf_2) + 8 0.03 net30 (net) + 0.08 0.00 1.69 v fanout29/A (sky130_fd_sc_hd__buf_2) + 0.06 0.18 1.87 v fanout29/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net29 (net) + 0.06 0.00 1.87 v _134_/A (sky130_fd_sc_hd__buf_2) + 0.06 0.16 2.04 v _134_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net20 (net) + 0.06 0.00 2.04 v output20/A (sky130_fd_sc_hd__buf_16) + 0.14 0.24 2.27 v output20/X (sky130_fd_sc_hd__buf_16) + 1 0.25 resetn_out (net) + 0.14 0.01 2.28 v resetn_out (out) + 2.28 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -2.28 data arrival time +----------------------------------------------------------------------------- + 37.32 slack (MET) + + +Startpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[1] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 0.91 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 0.91 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.13 0.63 1.54 ^ _114_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net11 (net) + 0.13 0.00 1.54 ^ output11/A (sky130_fd_sc_hd__buf_16) + 0.27 0.30 1.84 ^ output11/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[1] (net) + 0.27 0.01 1.85 ^ pad_gpio_dm[1] (out) + 1.85 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.85 data arrival time +----------------------------------------------------------------------------- + 37.75 slack (MET) + + +Startpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[2] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 0.91 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.12 0.62 1.53 ^ _115_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net12 (net) + 0.12 0.00 1.53 ^ output12/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.82 ^ output12/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[2] (net) + 0.27 0.02 1.84 ^ pad_gpio_dm[2] (out) + 1.84 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.84 data arrival time +----------------------------------------------------------------------------- + 37.76 slack (MET) + + +Startpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_holdover (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.91 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 0.61 1.52 ^ _107_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net13 (net) + 0.11 0.00 1.52 ^ output13/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.81 ^ output13/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_holdover (net) + 0.27 0.02 1.83 ^ pad_gpio_holdover (out) + 1.83 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.83 data arrival time +----------------------------------------------------------------------------- + 37.77 slack (MET) + + +Startpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_inenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.91 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 0.61 1.52 ^ _110_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net15 (net) + 0.11 0.00 1.53 ^ output15/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.82 ^ output15/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_inenb (net) + 0.27 0.01 1.83 ^ pad_gpio_inenb (out) + 1.83 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.83 data arrival time +----------------------------------------------------------------------------- + 37.77 slack (MET) + + +Startpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_vtrip_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.90 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.90 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 0.60 1.50 ^ _109_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net19 (net) + 0.10 0.00 1.50 ^ output19/A (sky130_fd_sc_hd__buf_16) + 0.28 0.30 1.80 ^ output19/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_vtrip_sel (net) + 0.28 0.01 1.80 ^ pad_gpio_vtrip_sel (out) + 1.80 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.80 data arrival time +----------------------------------------------------------------------------- + 37.80 slack (MET) + + +Startpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_en (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.89 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 0.60 1.49 ^ _116_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net7 (net) + 0.11 0.00 1.49 ^ output7/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.78 ^ output7/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_en (net) + 0.27 0.02 1.80 ^ pad_gpio_ana_en (out) + 1.80 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.80 data arrival time +----------------------------------------------------------------------------- + 37.80 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[0] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.89 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.11 0.61 1.49 ^ _113_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net10 (net) + 0.11 0.00 1.49 ^ output10/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.79 ^ output10/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[0] (net) + 0.27 0.01 1.79 ^ pad_gpio_dm[0] (out) + 1.79 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.79 data arrival time +----------------------------------------------------------------------------- + 37.81 slack (MET) + + +Startpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_slow_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 0.89 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 0.60 1.49 ^ _108_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net18 (net) + 0.10 0.00 1.49 ^ output18/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.78 ^ output18/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_slow_sel (net) + 0.27 0.01 1.79 ^ pad_gpio_slow_sel (out) + 1.79 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.79 data arrival time +----------------------------------------------------------------------------- + 37.81 slack (MET) + + +Startpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ib_mode_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 0.89 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 0.60 1.49 ^ _111_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net14 (net) + 0.10 0.00 1.49 ^ output14/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.78 ^ output14/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ib_mode_sel (net) + 0.27 0.02 1.79 ^ pad_gpio_ib_mode_sel (out) + 1.79 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.79 data arrival time +----------------------------------------------------------------------------- + 37.81 slack (MET) + + +Startpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_pol (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.88 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 0.60 1.48 ^ _118_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net8 (net) + 0.10 0.00 1.48 ^ output8/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 1.77 ^ output8/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_pol (net) + 0.27 0.01 1.78 ^ pad_gpio_ana_pol (out) + 1.78 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.78 data arrival time +----------------------------------------------------------------------------- + 37.82 slack (MET) + + +Startpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.88 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.09 0.59 1.48 ^ _117_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net9 (net) + 0.09 0.00 1.48 ^ output9/A (sky130_fd_sc_hd__buf_16) + 0.27 0.28 1.76 ^ output9/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_sel (net) + 0.27 0.02 1.78 ^ pad_gpio_ana_sel (out) + 1.78 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.78 data arrival time +----------------------------------------------------------------------------- + 37.82 slack (MET) + + +Startpoint: serial_data_in (input port clocked by serial_clock) +Endpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v serial_data_in (in) + 2 0.01 serial_data_in (net) + 5.00 0.00 10.00 v input5/A (sky130_fd_sc_hd__buf_2) + 0.18 1.36 11.36 v input5/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net5 (net) + 0.18 0.00 11.36 v _119_/D (sky130_fd_sc_hd__dfrtp_4) + 11.36 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 50.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 50.76 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.36 clock uncertainty + 0.00 50.36 clock reconvergence pessimism + -0.17 50.19 library setup time + 50.19 data required time +----------------------------------------------------------------------------- + 50.19 data required time + -11.36 data arrival time +----------------------------------------------------------------------------- + 38.84 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.49 1.34 v _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.06 0.00 1.34 v hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.63 1.96 v hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.08 0.00 1.96 v _123_/D (sky130_fd_sc_hd__dfrtp_4) + 1.96 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 50.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 50.76 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.36 clock uncertainty + 0.06 50.42 clock reconvergence pessimism + -0.13 50.30 library setup time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -1.96 data arrival time +----------------------------------------------------------------------------- + 48.33 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.35 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.06 0.00 1.35 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.64 1.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.09 0.00 1.98 v _122_/D (sky130_fd_sc_hd__dfrtp_4) + 1.98 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.08 50.45 clock reconvergence pessimism + -0.13 50.32 library setup time + 50.32 data required time +----------------------------------------------------------------------------- + 50.32 data required time + -1.98 data arrival time +----------------------------------------------------------------------------- + 48.33 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.05 0.00 1.32 v hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.63 1.95 v hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.09 0.00 1.95 v _130_/D (sky130_fd_sc_hd__dfrtp_4) + 1.95 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.06 50.43 clock reconvergence pessimism + -0.13 50.30 library setup time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -1.95 data arrival time +----------------------------------------------------------------------------- + 48.34 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.49 1.34 v _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.06 0.00 1.34 v hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.63 1.97 v hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.08 0.00 1.97 v _121_/D (sky130_fd_sc_hd__dfrtp_4) + 1.97 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.08 50.45 clock reconvergence pessimism + -0.13 50.32 library setup time + 50.32 data required time +----------------------------------------------------------------------------- + 50.32 data required time + -1.97 data arrival time +----------------------------------------------------------------------------- + 48.35 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.47 1.32 v _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.05 0.00 1.32 v hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.62 1.94 v hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.08 0.00 1.94 v _120_/D (sky130_fd_sc_hd__dfrtp_4) + 1.94 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.06 50.43 clock reconvergence pessimism + -0.13 50.30 library setup time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -1.94 data arrival time +----------------------------------------------------------------------------- + 48.36 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.33 v _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.05 0.00 1.33 v hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.93 v hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.07 0.00 1.93 v _128_/D (sky130_fd_sc_hd__dfrtp_4) + 1.93 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 50.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 50.76 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.36 clock uncertainty + 0.06 50.42 clock reconvergence pessimism + -0.12 50.30 library setup time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -1.93 data arrival time +----------------------------------------------------------------------------- + 48.37 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.05 0.00 1.32 v hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.62 1.94 v hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.08 0.00 1.94 v _129_/D (sky130_fd_sc_hd__dfrtp_4) + 1.94 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 50.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 50.76 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.36 clock uncertainty + 0.08 50.44 clock reconvergence pessimism + -0.13 50.31 library setup time + 50.31 data required time +----------------------------------------------------------------------------- + 50.31 data required time + -1.94 data arrival time +----------------------------------------------------------------------------- + 48.38 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.05 0.00 1.33 v hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.60 1.92 v hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.00 net49 (net) + 0.06 0.00 1.92 v _131_/D (sky130_fd_sc_hd__dfrtp_4) + 1.92 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 50.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 50.76 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.36 clock uncertainty + 0.06 50.42 clock reconvergence pessimism + -0.12 50.30 library setup time + 50.30 data required time +----------------------------------------------------------------------------- + 50.30 data required time + -1.92 data arrival time +----------------------------------------------------------------------------- + 48.38 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.05 0.00 1.32 v hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.61 1.94 v hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.08 0.00 1.94 v _125_/D (sky130_fd_sc_hd__dfrtp_4) + 1.94 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.08 50.45 clock reconvergence pessimism + -0.12 50.32 library setup time + 50.32 data required time +----------------------------------------------------------------------------- + 50.32 data required time + -1.94 data arrival time +----------------------------------------------------------------------------- + 48.39 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.05 0.00 1.32 v hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.92 v hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.07 0.00 1.92 v _124_/D (sky130_fd_sc_hd__dfrtp_4) + 1.92 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.06 50.43 clock reconvergence pessimism + -0.12 50.31 library setup time + 50.31 data required time +----------------------------------------------------------------------------- + 50.31 data required time + -1.92 data arrival time +----------------------------------------------------------------------------- + 48.39 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.33 v _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.05 0.00 1.33 v hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.93 v hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.07 0.00 1.93 v _127_/D (sky130_fd_sc_hd__dfrtp_4) + 1.93 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.08 50.45 clock reconvergence pessimism + -0.12 50.33 library setup time + 50.33 data required time +----------------------------------------------------------------------------- + 50.33 data required time + -1.93 data arrival time +----------------------------------------------------------------------------- + 48.40 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.05 0.00 1.32 v hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.93 v hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.07 0.00 1.93 v _126_/D (sky130_fd_sc_hd__dfrtp_4) + 1.93 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 50.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 50.77 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 50.37 clock uncertainty + 0.08 50.45 clock reconvergence pessimism + -0.12 50.32 library setup time + 50.32 data required time +----------------------------------------------------------------------------- + 50.32 data required time + -1.93 data arrival time +----------------------------------------------------------------------------- + 48.40 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.35 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.06 0.00 1.35 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.64 1.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.09 0.00 1.98 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 1.98 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.82 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.25 library setup time + 50.25 data required time +----------------------------------------------------------------------------- + 50.25 data required time + -1.98 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.05 0.00 1.32 v hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.63 1.95 v hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.09 0.00 1.95 v _113_/D (sky130_fd_sc_hd__dfbbn_2) + 1.95 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 50.80 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.18 50.22 library setup time + 50.22 data required time +----------------------------------------------------------------------------- + 50.22 data required time + -1.95 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _112_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.49 1.34 v _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.06 0.00 1.34 v hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.63 1.97 v hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.08 0.00 1.97 v _112_/D (sky130_fd_sc_hd__dfbbn_2) + 1.97 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.03 0.00 50.82 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.24 library setup time + 50.24 data required time +----------------------------------------------------------------------------- + 50.24 data required time + -1.97 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.49 1.34 v _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.06 0.00 1.34 v hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.63 1.96 v hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.08 0.00 1.96 v _110_/D (sky130_fd_sc_hd__dfbbn_2) + 1.96 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.82 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.25 library setup time + 50.25 data required time +----------------------------------------------------------------------------- + 50.25 data required time + -1.96 data arrival time +----------------------------------------------------------------------------- + 48.29 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.05 0.00 1.32 v hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.61 1.94 v hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.08 0.00 1.94 v _116_/D (sky130_fd_sc_hd__dfbbn_2) + 1.94 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 50.80 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.80 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.17 50.23 library setup time + 50.23 data required time +----------------------------------------------------------------------------- + 50.23 data required time + -1.94 data arrival time +----------------------------------------------------------------------------- + 48.30 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.05 0.00 1.32 v hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.62 1.94 v hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.08 0.00 1.94 v _109_/D (sky130_fd_sc_hd__dfbbn_2) + 1.94 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.81 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 50.81 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.17 50.24 library setup time + 50.24 data required time +----------------------------------------------------------------------------- + 50.24 data required time + -1.94 data arrival time +----------------------------------------------------------------------------- + 48.30 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.33 v _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.05 0.00 1.33 v hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.93 v hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.07 0.00 1.93 v _118_/D (sky130_fd_sc_hd__dfbbn_2) + 1.93 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 50.80 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.17 50.23 library setup time + 50.23 data required time +----------------------------------------------------------------------------- + 50.23 data required time + -1.93 data arrival time +----------------------------------------------------------------------------- + 48.30 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.05 0.00 1.32 v hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.93 v hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.07 0.00 1.93 v _117_/D (sky130_fd_sc_hd__dfbbn_2) + 1.93 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.80 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 50.80 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.40 clock uncertainty + 0.00 50.40 clock reconvergence pessimism + -0.17 50.23 library setup time + 50.23 data required time +----------------------------------------------------------------------------- + 50.23 data required time + -1.93 data arrival time +----------------------------------------------------------------------------- + 48.30 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.33 v _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.05 0.00 1.33 v hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.93 v hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.07 0.00 1.93 v _108_/D (sky130_fd_sc_hd__dfbbn_2) + 1.93 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.81 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 50.81 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.17 50.24 library setup time + 50.24 data required time +----------------------------------------------------------------------------- + 50.24 data required time + -1.93 data arrival time +----------------------------------------------------------------------------- + 48.31 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.47 1.32 v _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.05 0.00 1.32 v hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.62 1.94 v hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.08 0.00 1.94 v _106_/D (sky130_fd_sc_hd__dfbbn_2) + 1.94 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 50.82 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.25 library setup time + 50.25 data required time +----------------------------------------------------------------------------- + 50.25 data required time + -1.94 data arrival time +----------------------------------------------------------------------------- + 48.32 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.05 0.00 1.32 v hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.60 1.92 v hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.07 0.00 1.92 v _111_/D (sky130_fd_sc_hd__dfbbn_2) + 1.92 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 50.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 50.77 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.80 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 50.81 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.41 clock uncertainty + 0.00 50.41 clock reconvergence pessimism + -0.17 50.24 library setup time + 50.24 data required time +----------------------------------------------------------------------------- + 50.24 data required time + -1.92 data arrival time +----------------------------------------------------------------------------- + 48.32 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.34 v _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.06 0.00 1.34 v hold3/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.58 1.92 v hold3/X (sky130_fd_sc_hd__dlygate4sd3_1) + 1 0.00 net48 (net) + 0.05 0.00 1.92 v _115_/D (sky130_fd_sc_hd__dfbbn_2) + 1.92 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 50.82 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.16 50.26 library setup time + 50.26 data required time +----------------------------------------------------------------------------- + 50.26 data required time + -1.92 data arrival time +----------------------------------------------------------------------------- + 48.34 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.48 1.32 v _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.05 0.00 1.33 v hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.60 1.92 v hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.00 net49 (net) + 0.06 0.00 1.92 v _114_/D (sky130_fd_sc_hd__dfbbn_2) + 1.92 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 50.83 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 50.83 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.43 clock uncertainty + 0.00 50.43 clock reconvergence pessimism + -0.16 50.26 library setup time + 50.26 data required time +----------------------------------------------------------------------------- + 50.26 data required time + -1.92 data arrival time +----------------------------------------------------------------------------- + 48.34 slack (MET) + + + +======================= Fastest Corner =================================== + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.56 1.16 11.16 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.56 0.00 11.16 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.16 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.14 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 50.14 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + 0.00 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.16 data arrival time +----------------------------------------------------------------------------- + 38.58 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 v _079_/B (sky130_fd_sc_hd__nand2b_2) + 0.54 1.14 11.14 ^ _079_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _012_ (net) + 0.54 0.00 11.14 ^ _111_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.14 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 50.13 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + 0.00 49.74 library recovery time + 49.74 data required time +----------------------------------------------------------------------------- + 49.74 data required time + -11.14 data arrival time +----------------------------------------------------------------------------- + 38.60 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 v _089_/B (sky130_fd_sc_hd__nand2b_2) + 0.53 1.13 11.13 ^ _089_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _022_ (net) + 0.53 0.00 11.13 ^ _116_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.13 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.13 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + 0.01 49.74 library recovery time + 49.74 data required time +----------------------------------------------------------------------------- + 49.74 data required time + -11.13 data arrival time +----------------------------------------------------------------------------- + 38.61 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 v _085_/B (sky130_fd_sc_hd__nand2b_2) + 0.54 1.14 11.14 ^ _085_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _018_ (net) + 0.54 0.00 11.14 ^ _114_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.14 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.15 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 50.15 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.75 clock uncertainty + 0.00 49.75 clock reconvergence pessimism + 0.01 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.14 data arrival time +----------------------------------------------------------------------------- + 38.62 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 v _077_/B (sky130_fd_sc_hd__nand2b_2) + 0.53 1.13 11.13 ^ _077_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _010_ (net) + 0.53 0.00 11.13 ^ _110_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.13 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.14 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + 0.01 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.13 data arrival time +----------------------------------------------------------------------------- + 38.63 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 v _069_/B (sky130_fd_sc_hd__nand2b_2) + 0.53 1.12 11.12 ^ _069_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _002_ (net) + 0.53 0.00 11.13 ^ _106_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.13 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 50.14 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + 0.01 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.13 data arrival time +----------------------------------------------------------------------------- + 38.63 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 v _081_/B (sky130_fd_sc_hd__nand2b_2) + 0.52 1.11 11.11 ^ _081_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _014_ (net) + 0.52 0.00 11.11 ^ _112_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.11 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.14 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.02 0.00 50.14 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + 0.01 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.11 data arrival time +----------------------------------------------------------------------------- + 38.64 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 v _073_/B (sky130_fd_sc_hd__nand2b_2) + 0.49 1.08 11.08 ^ _073_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _006_ (net) + 0.49 0.00 11.08 ^ _108_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.08 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 50.13 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + 0.01 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.08 data arrival time +----------------------------------------------------------------------------- + 38.67 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 v _091_/B (sky130_fd_sc_hd__nand2b_2) + 0.49 1.07 11.07 ^ _091_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _024_ (net) + 0.49 0.00 11.07 ^ _117_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.07 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 50.13 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + 0.01 49.74 library recovery time + 49.74 data required time +----------------------------------------------------------------------------- + 49.74 data required time + -11.07 data arrival time +----------------------------------------------------------------------------- + 38.67 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 v _093_/B (sky130_fd_sc_hd__nand2b_2) + 0.48 1.06 11.06 ^ _093_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _026_ (net) + 0.48 0.00 11.06 ^ _118_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.06 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 50.13 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + 0.01 49.74 library recovery time + 49.74 data required time +----------------------------------------------------------------------------- + 49.74 data required time + -11.06 data arrival time +----------------------------------------------------------------------------- + 38.68 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 v _075_/B (sky130_fd_sc_hd__nand2b_2) + 0.48 1.06 11.06 ^ _075_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _008_ (net) + 0.48 0.00 11.06 ^ _109_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.06 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.14 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 50.14 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + 0.01 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.06 data arrival time +----------------------------------------------------------------------------- + 38.68 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 v _071_/B (sky130_fd_sc_hd__nand2b_2) + 0.49 1.07 11.07 ^ _071_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _004_ (net) + 0.49 0.00 11.07 ^ _107_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.07 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.14 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + 0.01 49.76 library recovery time + 49.76 data required time +----------------------------------------------------------------------------- + 49.76 data required time + -11.07 data arrival time +----------------------------------------------------------------------------- + 38.69 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 v _083_/B (sky130_fd_sc_hd__nand2b_2) + 0.47 1.05 11.05 ^ _083_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _016_ (net) + 0.47 0.00 11.05 ^ _113_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 50.13 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + 0.01 49.74 library recovery time + 49.74 data required time +----------------------------------------------------------------------------- + 49.74 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 38.70 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 ^ _072_/B (sky130_fd_sc_hd__or2_0) + 0.15 -0.23 9.77 ^ _072_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _005_ (net) + 0.15 0.00 9.77 ^ _108_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.77 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 50.13 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.06 49.67 library recovery time + 49.67 data required time +----------------------------------------------------------------------------- + 49.67 data required time + -9.77 data arrival time +----------------------------------------------------------------------------- + 39.90 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 ^ _086_/B (sky130_fd_sc_hd__or2_0) + 0.15 -0.22 9.78 ^ _086_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _019_ (net) + 0.15 0.00 9.78 ^ _115_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.78 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.14 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 50.14 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.06 49.69 library recovery time + 49.69 data required time +----------------------------------------------------------------------------- + 49.69 data required time + -9.78 data arrival time +----------------------------------------------------------------------------- + 39.91 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 ^ _080_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.24 9.76 ^ _080_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _013_ (net) + 0.14 0.00 9.76 ^ _112_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.76 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.14 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.02 0.00 50.14 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.06 49.68 library recovery time + 49.68 data required time +----------------------------------------------------------------------------- + 49.68 data required time + -9.76 data arrival time +----------------------------------------------------------------------------- + 39.92 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 ^ _076_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.24 9.76 ^ _076_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _009_ (net) + 0.14 0.00 9.76 ^ _110_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.76 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.14 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.06 49.69 library recovery time + 49.69 data required time +----------------------------------------------------------------------------- + 49.69 data required time + -9.76 data arrival time +----------------------------------------------------------------------------- + 39.92 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 ^ _088_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.26 9.74 ^ _088_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _021_ (net) + 0.14 0.00 9.74 ^ _116_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.74 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.13 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.06 49.67 library recovery time + 49.67 data required time +----------------------------------------------------------------------------- + 49.67 data required time + -9.74 data arrival time +----------------------------------------------------------------------------- + 39.93 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 ^ _078_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.26 9.74 ^ _078_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _011_ (net) + 0.14 0.00 9.74 ^ _111_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.74 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 50.13 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.06 49.67 library recovery time + 49.67 data required time +----------------------------------------------------------------------------- + 49.67 data required time + -9.74 data arrival time +----------------------------------------------------------------------------- + 39.93 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 ^ _074_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.26 9.74 ^ _074_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _007_ (net) + 0.14 0.00 9.74 ^ _109_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.74 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.14 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 50.14 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.06 49.68 library recovery time + 49.68 data required time +----------------------------------------------------------------------------- + 49.68 data required time + -9.74 data arrival time +----------------------------------------------------------------------------- + 39.93 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 ^ _084_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.24 9.76 ^ _084_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _017_ (net) + 0.14 0.00 9.76 ^ _114_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.76 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.15 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 50.15 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.75 clock uncertainty + 0.00 49.75 clock reconvergence pessimism + -0.06 49.69 library recovery time + 49.69 data required time +----------------------------------------------------------------------------- + 49.69 data required time + -9.76 data arrival time +----------------------------------------------------------------------------- + 39.93 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 ^ _090_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.28 9.72 ^ _090_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _023_ (net) + 0.14 0.00 9.72 ^ _117_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.72 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 50.13 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.06 49.67 library recovery time + 49.67 data required time +----------------------------------------------------------------------------- + 49.67 data required time + -9.72 data arrival time +----------------------------------------------------------------------------- + 39.95 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 ^ _070_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.27 9.73 ^ _070_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _003_ (net) + 0.14 0.00 9.73 ^ _107_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.73 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.14 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.06 49.69 library recovery time + 49.69 data required time +----------------------------------------------------------------------------- + 49.69 data required time + -9.73 data arrival time +----------------------------------------------------------------------------- + 39.96 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 ^ _092_/B (sky130_fd_sc_hd__or2_0) + 0.13 -0.30 9.70 ^ _092_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _025_ (net) + 0.13 0.00 9.70 ^ _118_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.70 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 50.13 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.06 49.67 library recovery time + 49.67 data required time +----------------------------------------------------------------------------- + 49.67 data required time + -9.70 data arrival time +----------------------------------------------------------------------------- + 39.97 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 ^ _082_/B (sky130_fd_sc_hd__or2_0) + 0.13 -0.30 9.70 ^ _082_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _015_ (net) + 0.13 0.00 9.70 ^ _113_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.70 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 50.13 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.06 49.67 library recovery time + 49.67 data required time +----------------------------------------------------------------------------- + 49.67 data required time + -9.70 data arrival time +----------------------------------------------------------------------------- + 39.97 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 ^ _068_/B (sky130_fd_sc_hd__or2_0) + 0.14 -0.28 9.72 ^ _068_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _001_ (net) + 0.14 0.00 9.72 ^ _106_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.72 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 50.14 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.06 49.69 library recovery time + 49.69 data required time +----------------------------------------------------------------------------- + 49.69 data required time + -9.72 data arrival time +----------------------------------------------------------------------------- + 39.97 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 1.22 26.22 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 26.22 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.03 0.16 26.38 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.03 0.00 26.38 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 26.43 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.04 0.00 26.43 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.07 0.26 26.69 ^ _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.07 0.00 26.69 ^ output21/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 26.90 ^ output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.21 0.01 26.91 ^ serial_data_out (out) + 26.91 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -26.91 data arrival time +----------------------------------------------------------------------------- + 12.69 slack (MET) + + +Startpoint: serial_load (clock source 'serial_load') +Endpoint: serial_load_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_load (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 25.00 v clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 1.22 26.22 v clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 26.22 v clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.16 26.38 v clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.04 0.00 26.38 v serial_load_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 0.17 26.56 v serial_load_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_load_out (net) + 0.14 0.03 26.59 v serial_load_out (out) + 26.59 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -26.59 data arrival time +----------------------------------------------------------------------------- + 13.01 slack (MET) + + +Startpoint: serial_clock (clock source 'serial_clock') +Endpoint: serial_clock_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock (fall edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 1.22 26.22 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 26.22 v clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.03 0.15 26.37 v clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.03 0.00 26.38 v serial_clock_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 0.18 26.56 v serial_clock_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_clock_out (net) + 0.13 0.02 26.58 v serial_clock_out (out) + 26.58 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -26.58 data arrival time +----------------------------------------------------------------------------- + 13.02 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.31 0.43 v _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.05 0.00 0.43 v _132_/D (sky130_fd_sc_hd__dfrtp_2) + 0.43 data arrival time + + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 1.10 26.10 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 26.10 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.03 0.14 26.25 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.03 0.00 26.25 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.04 0.04 26.29 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.04 0.00 26.29 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + -0.40 25.89 clock uncertainty + 0.00 25.89 clock reconvergence pessimism + -0.08 25.82 library setup time + 25.82 data required time +----------------------------------------------------------------------------- + 25.82 data required time + -0.43 data arrival time +----------------------------------------------------------------------------- + 25.39 slack (MET) + + +Startpoint: user_gpio_oeb (input port clocked by serial_clock) +Endpoint: pad_gpio_outenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v user_gpio_oeb (in) + 2 0.02 user_gpio_oeb (net) + 5.00 0.00 10.00 v _061_/A0 (sky130_fd_sc_hd__mux2_4) + 0.16 1.54 11.54 v _061_/X (sky130_fd_sc_hd__mux2_4) + 1 0.01 net17 (net) + 0.16 0.00 11.54 v output17/A (sky130_fd_sc_hd__buf_16) + 0.11 0.21 11.75 v output17/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_outenb (net) + 0.12 0.02 11.77 v pad_gpio_outenb (out) + 11.77 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -11.77 data arrival time +----------------------------------------------------------------------------- + 27.83 slack (MET) + + +Startpoint: mgmt_gpio_oeb (input port clocked by serial_clock) +Endpoint: pad_gpio_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v mgmt_gpio_oeb (in) + 2 0.01 mgmt_gpio_oeb (net) + 5.00 0.00 10.00 v input1/A (sky130_fd_sc_hd__buf_2) + 0.12 0.99 10.99 v input1/X (sky130_fd_sc_hd__buf_2) + 2 0.01 net1 (net) + 0.12 0.00 10.99 v _063_/C (sky130_fd_sc_hd__and3b_2) + 0.05 0.19 11.19 v _063_/X (sky130_fd_sc_hd__and3b_2) + 2 0.01 _043_ (net) + 0.05 0.00 11.19 v _064_/B (sky130_fd_sc_hd__and2b_2) + 0.04 0.14 11.33 v _064_/X (sky130_fd_sc_hd__and2b_2) + 1 0.01 _044_ (net) + 0.04 0.00 11.33 v _066_/A1 (sky130_fd_sc_hd__o21ai_4) + 0.12 0.14 11.47 ^ _066_/Y (sky130_fd_sc_hd__o21ai_4) + 1 0.02 net16 (net) + 0.12 0.00 11.47 ^ output16/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 11.68 ^ output16/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_out (net) + 0.21 0.01 11.69 ^ pad_gpio_out (out) + 11.69 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -11.69 data arrival time +----------------------------------------------------------------------------- + 27.91 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: user_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 v input3/A (sky130_fd_sc_hd__buf_2) + 0.11 0.98 10.98 v input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.11 0.00 10.98 v _067_/B (sky130_fd_sc_hd__and2_2) + 0.06 0.20 11.18 v _067_/X (sky130_fd_sc_hd__and2_2) + 1 0.03 net22 (net) + 0.06 0.00 11.18 v output22/A (sky130_fd_sc_hd__buf_16) + 0.11 0.18 11.35 v output22/X (sky130_fd_sc_hd__buf_16) + 1 0.25 user_gpio_in (net) + 0.11 0.01 11.36 v user_gpio_in (out) + 11.36 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -11.36 data arrival time +----------------------------------------------------------------------------- + 28.24 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: mgmt_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 v input3/A (sky130_fd_sc_hd__buf_2) + 0.11 0.98 10.98 v input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.11 0.00 10.98 v _133_/A (sky130_fd_sc_hd__buf_2) + 0.04 0.13 11.11 v _133_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net6 (net) + 0.04 0.00 11.11 v output6/A (sky130_fd_sc_hd__buf_16) + 0.11 0.16 11.27 v output6/X (sky130_fd_sc_hd__buf_16) + 1 0.25 mgmt_gpio_in (net) + 0.11 0.01 11.28 v mgmt_gpio_in (out) + 11.28 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -11.28 data arrival time +----------------------------------------------------------------------------- + 28.32 slack (MET) + + +Startpoint: resetn (input port) +Endpoint: resetn_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 v input external delay + 5.00 0.00 0.00 v resetn (in) + 2 0.01 resetn (net) + 5.00 0.00 0.00 v input4/A (sky130_fd_sc_hd__buf_2) + 0.11 0.98 0.98 v input4/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net4 (net) + 0.11 0.00 0.98 v fanout31/A (sky130_fd_sc_hd__buf_2) + 0.05 0.14 1.12 v fanout31/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net31 (net) + 0.05 0.00 1.12 v fanout30/A (sky130_fd_sc_hd__buf_2) + 0.06 0.12 1.25 v fanout30/X (sky130_fd_sc_hd__buf_2) + 8 0.03 net30 (net) + 0.06 0.00 1.25 v fanout29/A (sky130_fd_sc_hd__buf_2) + 0.04 0.11 1.36 v fanout29/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net29 (net) + 0.04 0.00 1.36 v _134_/A (sky130_fd_sc_hd__buf_2) + 0.04 0.11 1.47 v _134_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net20 (net) + 0.04 0.00 1.47 v output20/A (sky130_fd_sc_hd__buf_16) + 0.11 0.17 1.64 v output20/X (sky130_fd_sc_hd__buf_16) + 1 0.25 resetn_out (net) + 0.11 0.01 1.64 v resetn_out (out) + 1.64 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -1.64 data arrival time +----------------------------------------------------------------------------- + 37.96 slack (MET) + + +Startpoint: serial_data_in (input port clocked by serial_clock) +Endpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v serial_data_in (in) + 2 0.01 serial_data_in (net) + 5.00 0.00 10.00 v input5/A (sky130_fd_sc_hd__buf_2) + 0.13 1.02 11.02 v input5/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net5 (net) + 0.13 0.00 11.02 v _119_/D (sky130_fd_sc_hd__dfrtp_4) + 11.02 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 50.11 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.00 49.71 clock reconvergence pessimism + -0.11 49.60 library setup time + 49.60 data required time +----------------------------------------------------------------------------- + 49.60 data required time + -11.02 data arrival time +----------------------------------------------------------------------------- + 38.58 slack (MET) + + +Startpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[1] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 0.16 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.10 0.41 0.57 ^ _114_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net11 (net) + 0.10 0.00 0.58 ^ output11/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.79 ^ output11/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[1] (net) + 0.21 0.01 0.80 ^ pad_gpio_dm[1] (out) + 0.80 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.80 data arrival time +----------------------------------------------------------------------------- + 38.80 slack (MET) + + +Startpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[2] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.16 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 0.16 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.09 0.41 0.57 ^ _115_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net12 (net) + 0.09 0.00 0.57 ^ output12/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.77 ^ output12/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[2] (net) + 0.22 0.02 0.79 ^ pad_gpio_dm[2] (out) + 0.79 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.79 data arrival time +----------------------------------------------------------------------------- + 38.81 slack (MET) + + +Startpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_holdover (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.16 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.08 0.40 0.56 ^ _107_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net13 (net) + 0.08 0.00 0.56 ^ output13/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.77 ^ output13/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_holdover (net) + 0.21 0.02 0.78 ^ pad_gpio_holdover (out) + 0.78 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.78 data arrival time +----------------------------------------------------------------------------- + 38.82 slack (MET) + + +Startpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_inenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.16 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.08 0.40 0.56 ^ _110_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net15 (net) + 0.08 0.00 0.56 ^ output15/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.77 ^ output15/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_inenb (net) + 0.21 0.01 0.78 ^ pad_gpio_inenb (out) + 0.78 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.78 data arrival time +----------------------------------------------------------------------------- + 38.82 slack (MET) + + +Startpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_vtrip_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.15 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.15 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.08 0.39 0.54 ^ _109_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net19 (net) + 0.08 0.00 0.55 ^ output19/A (sky130_fd_sc_hd__buf_16) + 0.22 0.21 0.76 ^ output19/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_vtrip_sel (net) + 0.22 0.01 0.77 ^ pad_gpio_vtrip_sel (out) + 0.77 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.77 data arrival time +----------------------------------------------------------------------------- + 38.83 slack (MET) + + +Startpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_en (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.14 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.08 0.40 0.54 ^ _116_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net7 (net) + 0.08 0.00 0.54 ^ output7/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.75 ^ output7/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_en (net) + 0.22 0.02 0.76 ^ pad_gpio_ana_en (out) + 0.76 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.76 data arrival time +----------------------------------------------------------------------------- + 38.84 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[0] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.14 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.08 0.40 0.54 ^ _113_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net10 (net) + 0.08 0.00 0.54 ^ output10/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.75 ^ output10/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[0] (net) + 0.21 0.01 0.76 ^ pad_gpio_dm[0] (out) + 0.76 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.76 data arrival time +----------------------------------------------------------------------------- + 38.84 slack (MET) + + +Startpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ib_mode_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 0.15 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.07 0.39 0.54 ^ _111_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net14 (net) + 0.07 0.00 0.54 ^ output14/A (sky130_fd_sc_hd__buf_16) + 0.21 0.20 0.74 ^ output14/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ib_mode_sel (net) + 0.21 0.02 0.76 ^ pad_gpio_ib_mode_sel (out) + 0.76 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.76 data arrival time +----------------------------------------------------------------------------- + 38.84 slack (MET) + + +Startpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_slow_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 0.15 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.07 0.39 0.54 ^ _108_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net18 (net) + 0.07 0.00 0.54 ^ output18/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.75 ^ output18/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_slow_sel (net) + 0.21 0.01 0.76 ^ pad_gpio_slow_sel (out) + 0.76 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.76 data arrival time +----------------------------------------------------------------------------- + 38.84 slack (MET) + + +Startpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_pol (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.14 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.07 0.39 0.53 ^ _118_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net8 (net) + 0.07 0.00 0.53 ^ output8/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 0.74 ^ output8/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_pol (net) + 0.21 0.01 0.75 ^ pad_gpio_ana_pol (out) + 0.75 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.75 data arrival time +----------------------------------------------------------------------------- + 38.85 slack (MET) + + +Startpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.14 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.07 0.39 0.53 ^ _117_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net9 (net) + 0.07 0.00 0.53 ^ output9/A (sky130_fd_sc_hd__buf_16) + 0.21 0.20 0.73 ^ output9/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_sel (net) + 0.22 0.02 0.75 ^ pad_gpio_ana_sel (out) + 0.75 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -0.75 data arrival time +----------------------------------------------------------------------------- + 38.85 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.31 0.43 v _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.04 0.00 0.43 v hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.41 0.84 v hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.06 0.00 0.84 v _123_/D (sky130_fd_sc_hd__dfrtp_4) + 0.84 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 50.11 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.00 49.71 clock reconvergence pessimism + -0.08 49.62 library setup time + 49.62 data required time +----------------------------------------------------------------------------- + 49.62 data required time + -0.84 data arrival time +----------------------------------------------------------------------------- + 48.78 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.31 0.43 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.05 0.00 0.43 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.42 0.86 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.06 0.00 0.86 v _122_/D (sky130_fd_sc_hd__dfrtp_4) + 0.86 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.01 49.72 clock reconvergence pessimism + -0.08 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.86 data arrival time +----------------------------------------------------------------------------- + 48.78 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.04 0.00 0.42 v hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.42 0.84 v hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.07 0.00 0.84 v _130_/D (sky130_fd_sc_hd__dfrtp_4) + 0.84 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.00 49.71 clock reconvergence pessimism + -0.08 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.84 data arrival time +----------------------------------------------------------------------------- + 48.79 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.31 0.43 v _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.04 0.00 0.43 v hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.42 0.85 v hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.06 0.00 0.85 v _121_/D (sky130_fd_sc_hd__dfrtp_4) + 0.85 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.01 49.72 clock reconvergence pessimism + -0.08 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.85 data arrival time +----------------------------------------------------------------------------- + 48.79 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.41 v _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.04 0.00 0.41 v hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.41 0.82 v hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.06 0.00 0.82 v _120_/D (sky130_fd_sc_hd__dfrtp_4) + 0.82 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.00 49.71 clock reconvergence pessimism + -0.08 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.81 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.04 0.00 0.42 v hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.05 0.00 0.82 v _128_/D (sky130_fd_sc_hd__dfrtp_4) + 0.82 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 50.11 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.00 49.71 clock reconvergence pessimism + -0.08 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.81 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.41 v _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.04 0.00 0.42 v hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.41 0.82 v hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.06 0.00 0.82 v _129_/D (sky130_fd_sc_hd__dfrtp_4) + 0.82 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 50.11 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.01 49.72 clock reconvergence pessimism + -0.08 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.81 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.04 0.00 0.42 v hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.39 0.81 v hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.05 0.00 0.81 v _131_/D (sky130_fd_sc_hd__dfrtp_4) + 0.81 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 50.11 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.00 49.71 clock reconvergence pessimism + -0.08 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.81 data arrival time +----------------------------------------------------------------------------- + 48.82 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.04 0.00 0.42 v hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.05 0.00 0.82 v _125_/D (sky130_fd_sc_hd__dfrtp_4) + 0.82 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.01 49.72 clock reconvergence pessimism + -0.08 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.82 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.04 0.00 0.42 v hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.81 v hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.05 0.00 0.81 v _124_/D (sky130_fd_sc_hd__dfrtp_4) + 0.81 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.00 49.71 clock reconvergence pessimism + -0.08 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.81 data arrival time +----------------------------------------------------------------------------- + 48.82 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.04 0.00 0.42 v hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.05 0.00 0.82 v _126_/D (sky130_fd_sc_hd__dfrtp_4) + 0.82 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.01 49.72 clock reconvergence pessimism + -0.08 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.82 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.04 0.00 0.42 v hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.05 0.00 0.82 v _127_/D (sky130_fd_sc_hd__dfrtp_4) + 0.82 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 50.11 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + -0.40 49.71 clock uncertainty + 0.01 49.72 clock reconvergence pessimism + -0.08 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.82 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.31 0.43 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.05 0.00 0.43 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.42 0.86 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.06 0.00 0.86 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 0.86 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.14 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.10 49.65 library setup time + 49.65 data required time +----------------------------------------------------------------------------- + 49.65 data required time + -0.86 data arrival time +----------------------------------------------------------------------------- + 48.79 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _112_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.31 0.43 v _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.04 0.00 0.43 v hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.42 0.85 v hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.06 0.00 0.85 v _112_/D (sky130_fd_sc_hd__dfbbn_2) + 0.85 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.14 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.02 0.00 50.14 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.10 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.85 data arrival time +----------------------------------------------------------------------------- + 48.79 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.04 0.00 0.42 v hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.42 0.84 v hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.07 0.00 0.84 v _113_/D (sky130_fd_sc_hd__dfbbn_2) + 0.84 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 50.13 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.10 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.84 data arrival time +----------------------------------------------------------------------------- + 48.79 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.31 0.43 v _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.04 0.00 0.43 v hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.41 0.84 v hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.06 0.00 0.84 v _110_/D (sky130_fd_sc_hd__dfbbn_2) + 0.84 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 50.14 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.10 49.65 library setup time + 49.65 data required time +----------------------------------------------------------------------------- + 49.65 data required time + -0.84 data arrival time +----------------------------------------------------------------------------- + 48.81 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.04 0.00 0.42 v hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.05 0.00 0.82 v _116_/D (sky130_fd_sc_hd__dfbbn_2) + 0.82 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 50.13 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.10 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.81 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.41 v _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.04 0.00 0.42 v hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.41 0.82 v hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.06 0.00 0.82 v _109_/D (sky130_fd_sc_hd__dfbbn_2) + 0.82 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.14 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 50.14 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.10 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.81 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.04 0.00 0.42 v hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.05 0.00 0.82 v _117_/D (sky130_fd_sc_hd__dfbbn_2) + 0.82 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 50.13 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.09 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.81 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.04 0.00 0.42 v hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.05 0.00 0.82 v _118_/D (sky130_fd_sc_hd__dfbbn_2) + 0.82 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 50.13 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.09 49.63 library setup time + 49.63 data required time +----------------------------------------------------------------------------- + 49.63 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.82 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.04 0.00 0.42 v hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.82 v hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.05 0.00 0.82 v _108_/D (sky130_fd_sc_hd__dfbbn_2) + 0.82 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 50.13 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.09 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.82 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.41 v _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.04 0.00 0.41 v hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.41 0.82 v hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.06 0.00 0.82 v _106_/D (sky130_fd_sc_hd__dfbbn_2) + 0.82 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 50.14 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.10 49.65 library setup time + 49.65 data required time +----------------------------------------------------------------------------- + 49.65 data required time + -0.82 data arrival time +----------------------------------------------------------------------------- + 48.83 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.04 0.00 0.42 v hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.40 0.81 v hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.05 0.00 0.81 v _111_/D (sky130_fd_sc_hd__dfbbn_2) + 0.81 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 50.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 50.11 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 50.13 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 50.13 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.73 clock uncertainty + 0.00 49.73 clock reconvergence pessimism + -0.09 49.64 library setup time + 49.64 data required time +----------------------------------------------------------------------------- + 49.64 data required time + -0.81 data arrival time +----------------------------------------------------------------------------- + 48.83 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.30 0.42 v _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.04 0.00 0.42 v hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.39 0.81 v hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.05 0.00 0.81 v _114_/D (sky130_fd_sc_hd__dfbbn_2) + 0.81 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.15 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 50.15 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.75 clock uncertainty + 0.00 49.75 clock reconvergence pessimism + -0.09 49.66 library setup time + 49.66 data required time +----------------------------------------------------------------------------- + 49.66 data required time + -0.81 data arrival time +----------------------------------------------------------------------------- + 48.84 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.31 0.43 v _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.05 0.00 0.43 v hold3/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.04 0.38 0.81 v hold3/X (sky130_fd_sc_hd__dlygate4sd3_1) + 1 0.00 net48 (net) + 0.04 0.00 0.81 v _115_/D (sky130_fd_sc_hd__dfbbn_2) + 0.81 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.14 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 50.14 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.09 49.66 library setup time + 49.66 data required time +----------------------------------------------------------------------------- + 49.66 data required time + -0.81 data arrival time +----------------------------------------------------------------------------- + 48.84 slack (MET) + + diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.min.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.min.rpt new file mode 100644 index 00000000..885624d9 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.min.rpt @@ -0,0 +1,9925 @@ + +=========================================================================== +report_checks -path_delay min (Hold) +============================================================================ + +======================= Slowest Corner =================================== + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 ^ _068_/B (sky130_fd_sc_hd__or2_0) + 0.12 0.87 10.87 ^ _068_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _001_ (net) + 0.12 0.00 10.87 ^ _106_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.87 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.05 0.00 1.74 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.17 2.32 library removal time + 2.32 data required time +----------------------------------------------------------------------------- + 2.32 data required time + -10.87 data arrival time +----------------------------------------------------------------------------- + 8.55 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 ^ _082_/B (sky130_fd_sc_hd__or2_0) + 0.10 0.84 10.84 ^ _082_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _015_ (net) + 0.10 0.00 10.84 ^ _113_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.84 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.70 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 1.70 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.17 2.28 library removal time + 2.28 data required time +----------------------------------------------------------------------------- + 2.28 data required time + -10.84 data arrival time +----------------------------------------------------------------------------- + 8.56 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 ^ _092_/B (sky130_fd_sc_hd__or2_0) + 0.10 0.84 10.84 ^ _092_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _025_ (net) + 0.10 0.00 10.84 ^ _118_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.84 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 1.70 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.17 2.27 library removal time + 2.27 data required time +----------------------------------------------------------------------------- + 2.27 data required time + -10.84 data arrival time +----------------------------------------------------------------------------- + 8.57 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 ^ _070_/B (sky130_fd_sc_hd__or2_0) + 0.14 0.88 10.88 ^ _070_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _003_ (net) + 0.14 0.00 10.88 ^ _107_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.88 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 1.74 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.17 2.31 library removal time + 2.31 data required time +----------------------------------------------------------------------------- + 2.31 data required time + -10.88 data arrival time +----------------------------------------------------------------------------- + 8.57 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 ^ _090_/B (sky130_fd_sc_hd__or2_0) + 0.12 0.87 10.87 ^ _090_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _023_ (net) + 0.12 0.00 10.87 ^ _117_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.87 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 1.70 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.17 2.26 library removal time + 2.26 data required time +----------------------------------------------------------------------------- + 2.26 data required time + -10.87 data arrival time +----------------------------------------------------------------------------- + 8.60 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 ^ _084_/B (sky130_fd_sc_hd__or2_0) + 0.20 0.93 10.93 ^ _084_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _017_ (net) + 0.20 0.00 10.93 ^ _114_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.93 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.10 1.75 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 1.75 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.15 clock uncertainty + 0.00 2.15 clock reconvergence pessimism + 0.15 2.30 library removal time + 2.30 data required time +----------------------------------------------------------------------------- + 2.30 data required time + -10.93 data arrival time +----------------------------------------------------------------------------- + 8.63 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 ^ _074_/B (sky130_fd_sc_hd__or2_0) + 0.18 0.91 10.91 ^ _074_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _007_ (net) + 0.18 0.00 10.91 ^ _109_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.91 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.72 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 1.72 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.12 clock uncertainty + 0.00 2.12 clock reconvergence pessimism + 0.15 2.27 library removal time + 2.27 data required time +----------------------------------------------------------------------------- + 2.27 data required time + -10.91 data arrival time +----------------------------------------------------------------------------- + 8.63 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 ^ _078_/B (sky130_fd_sc_hd__or2_0) + 0.18 0.91 10.91 ^ _078_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _011_ (net) + 0.18 0.00 10.91 ^ _111_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.91 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 1.71 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.15 2.27 library removal time + 2.27 data required time +----------------------------------------------------------------------------- + 2.27 data required time + -10.91 data arrival time +----------------------------------------------------------------------------- + 8.64 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 ^ _088_/B (sky130_fd_sc_hd__or2_0) + 0.17 0.91 10.91 ^ _088_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _021_ (net) + 0.17 0.00 10.91 ^ _116_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.91 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 1.71 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.15 2.26 library removal time + 2.26 data required time +----------------------------------------------------------------------------- + 2.26 data required time + -10.91 data arrival time +----------------------------------------------------------------------------- + 8.64 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 ^ _076_/B (sky130_fd_sc_hd__or2_0) + 0.22 0.94 10.94 ^ _076_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _009_ (net) + 0.22 0.00 10.94 ^ _110_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.94 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 1.74 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.15 2.29 library removal time + 2.29 data required time +----------------------------------------------------------------------------- + 2.29 data required time + -10.94 data arrival time +----------------------------------------------------------------------------- + 8.65 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 ^ _080_/B (sky130_fd_sc_hd__or2_0) + 0.20 0.93 10.93 ^ _080_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _013_ (net) + 0.20 0.00 10.93 ^ _112_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.93 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.04 0.09 1.73 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.04 0.00 1.73 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.13 clock uncertainty + 0.00 2.13 clock reconvergence pessimism + 0.15 2.28 library removal time + 2.28 data required time +----------------------------------------------------------------------------- + 2.28 data required time + -10.93 data arrival time +----------------------------------------------------------------------------- + 8.65 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 v _083_/B (sky130_fd_sc_hd__nand2b_2) + 0.06 0.90 10.90 ^ _083_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _016_ (net) + 0.06 0.00 10.90 ^ _113_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.90 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.70 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 1.70 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.14 2.24 library removal time + 2.24 data required time +----------------------------------------------------------------------------- + 2.24 data required time + -10.90 data arrival time +----------------------------------------------------------------------------- + 8.66 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 v _071_/B (sky130_fd_sc_hd__nand2b_2) + 0.07 0.95 10.95 ^ _071_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _004_ (net) + 0.07 0.00 10.95 ^ _107_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.95 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 1.74 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.14 2.29 library removal time + 2.29 data required time +----------------------------------------------------------------------------- + 2.29 data required time + -10.95 data arrival time +----------------------------------------------------------------------------- + 8.67 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 v _075_/B (sky130_fd_sc_hd__nand2b_2) + 0.07 0.94 10.94 ^ _075_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _008_ (net) + 0.07 0.00 10.94 ^ _109_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.94 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.72 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 1.72 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.12 clock uncertainty + 0.00 2.12 clock reconvergence pessimism + 0.14 2.26 library removal time + 2.26 data required time +----------------------------------------------------------------------------- + 2.26 data required time + -10.94 data arrival time +----------------------------------------------------------------------------- + 8.68 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 ^ _086_/B (sky130_fd_sc_hd__or2_0) + 0.25 0.97 10.97 ^ _086_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _019_ (net) + 0.25 0.00 10.97 ^ _115_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.97 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 1.74 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.14 2.28 library removal time + 2.28 data required time +----------------------------------------------------------------------------- + 2.28 data required time + -10.97 data arrival time +----------------------------------------------------------------------------- + 8.69 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 v _093_/B (sky130_fd_sc_hd__nand2b_2) + 0.07 0.94 10.94 ^ _093_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _026_ (net) + 0.07 0.00 10.94 ^ _118_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.94 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 1.70 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.14 2.24 library removal time + 2.24 data required time +----------------------------------------------------------------------------- + 2.24 data required time + -10.94 data arrival time +----------------------------------------------------------------------------- + 8.70 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 ^ _072_/B (sky130_fd_sc_hd__or2_0) + 0.25 0.96 10.96 ^ _072_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _005_ (net) + 0.25 0.00 10.96 ^ _108_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.96 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.09 1.71 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 1.71 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.14 2.25 library removal time + 2.25 data required time +----------------------------------------------------------------------------- + 2.25 data required time + -10.96 data arrival time +----------------------------------------------------------------------------- + 8.72 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 v _091_/B (sky130_fd_sc_hd__nand2b_2) + 0.07 0.96 10.96 ^ _091_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _024_ (net) + 0.07 0.00 10.96 ^ _117_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.96 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 1.70 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.14 2.23 library removal time + 2.23 data required time +----------------------------------------------------------------------------- + 2.23 data required time + -10.96 data arrival time +----------------------------------------------------------------------------- + 8.72 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 v _073_/B (sky130_fd_sc_hd__nand2b_2) + 0.08 0.97 10.97 ^ _073_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _006_ (net) + 0.08 0.00 10.97 ^ _108_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.97 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.09 1.71 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 1.71 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.14 2.25 library removal time + 2.25 data required time +----------------------------------------------------------------------------- + 2.25 data required time + -10.97 data arrival time +----------------------------------------------------------------------------- + 8.72 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 v _081_/B (sky130_fd_sc_hd__nand2b_2) + 0.08 1.02 11.02 ^ _081_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _014_ (net) + 0.08 0.00 11.02 ^ _112_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.02 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.04 0.09 1.73 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.04 0.00 1.73 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.13 clock uncertainty + 0.00 2.13 clock reconvergence pessimism + 0.14 2.27 library removal time + 2.27 data required time +----------------------------------------------------------------------------- + 2.27 data required time + -11.02 data arrival time +----------------------------------------------------------------------------- + 8.75 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 v _069_/B (sky130_fd_sc_hd__nand2b_2) + 0.09 1.04 11.05 ^ _069_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _002_ (net) + 0.09 0.00 11.05 ^ _106_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.05 0.00 1.74 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.14 2.28 library removal time + 2.28 data required time +----------------------------------------------------------------------------- + 2.28 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 8.76 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 v _077_/B (sky130_fd_sc_hd__nand2b_2) + 0.09 1.05 11.05 ^ _077_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _010_ (net) + 0.09 0.00 11.05 ^ _110_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 1.74 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.14 2.28 library removal time + 2.28 data required time +----------------------------------------------------------------------------- + 2.28 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 8.77 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 v _085_/B (sky130_fd_sc_hd__nand2b_2) + 0.10 1.07 11.07 ^ _085_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _018_ (net) + 0.10 0.00 11.07 ^ _114_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.07 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.10 1.75 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 1.75 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.15 clock uncertainty + 0.00 2.15 clock reconvergence pessimism + 0.14 2.29 library removal time + 2.29 data required time +----------------------------------------------------------------------------- + 2.29 data required time + -11.07 data arrival time +----------------------------------------------------------------------------- + 8.78 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 v _089_/B (sky130_fd_sc_hd__nand2b_2) + 0.09 1.05 11.05 ^ _089_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _022_ (net) + 0.09 0.00 11.05 ^ _116_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 1.71 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.13 2.24 library removal time + 2.24 data required time +----------------------------------------------------------------------------- + 2.24 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 8.81 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 v _079_/B (sky130_fd_sc_hd__nand2b_2) + 0.10 1.07 11.07 ^ _079_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _012_ (net) + 0.10 0.00 11.07 ^ _111_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.07 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 1.71 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.13 2.24 library removal time + 2.24 data required time +----------------------------------------------------------------------------- + 2.24 data required time + -11.07 data arrival time +----------------------------------------------------------------------------- + 8.82 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.11 1.11 11.11 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.11 0.00 11.11 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.11 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 1.74 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.14 2.28 library removal time + 2.28 data required time +----------------------------------------------------------------------------- + 2.28 data required time + -11.11 data arrival time +----------------------------------------------------------------------------- + 8.83 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.20 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.09 0.00 2.20 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.03 3.24 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.13 0.00 3.24 ^ _124_/D (sky130_fd_sc_hd__dfrtp_4) + 3.24 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.12 1.90 clock reconvergence pessimism + -0.09 1.81 library hold time + 1.81 data required time +----------------------------------------------------------------------------- + 1.81 data required time + -3.24 data arrival time +----------------------------------------------------------------------------- + 1.43 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.09 0.00 2.21 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.12 1.02 3.24 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.00 net49 (net) + 0.12 0.00 3.24 ^ _131_/D (sky130_fd_sc_hd__dfrtp_4) + 3.24 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.01 clock uncertainty + -0.12 1.89 clock reconvergence pessimism + -0.09 1.80 library hold time + 1.80 data required time +----------------------------------------------------------------------------- + 1.80 data required time + -3.24 data arrival time +----------------------------------------------------------------------------- + 1.44 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.22 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.09 0.00 2.22 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.04 3.25 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.13 0.00 3.25 ^ _128_/D (sky130_fd_sc_hd__dfrtp_4) + 3.25 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.01 clock uncertainty + -0.12 1.89 clock reconvergence pessimism + -0.09 1.80 library hold time + 1.80 data required time +----------------------------------------------------------------------------- + 1.80 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 1.46 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.08 0.74 2.20 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.08 0.00 2.20 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.07 3.27 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.17 0.00 3.27 ^ _120_/D (sky130_fd_sc_hd__dfrtp_4) + 3.27 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.12 1.90 clock reconvergence pessimism + -0.10 1.80 library hold time + 1.80 data required time +----------------------------------------------------------------------------- + 1.80 data required time + -3.27 data arrival time +----------------------------------------------------------------------------- + 1.47 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.09 0.00 2.21 ^ hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.04 3.25 ^ hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.13 0.00 3.25 ^ _126_/D (sky130_fd_sc_hd__dfrtp_4) + 3.25 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.15 1.87 clock reconvergence pessimism + -0.09 1.78 library hold time + 1.78 data required time +----------------------------------------------------------------------------- + 1.78 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 1.47 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.22 ^ _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.09 0.00 2.22 ^ hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.04 3.25 ^ hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.13 0.00 3.25 ^ _127_/D (sky130_fd_sc_hd__dfrtp_4) + 3.25 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.15 1.87 clock reconvergence pessimism + -0.09 1.78 library hold time + 1.78 data required time +----------------------------------------------------------------------------- + 1.78 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 1.47 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.09 0.00 2.21 ^ hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.15 1.05 3.26 ^ hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.15 0.00 3.26 ^ _125_/D (sky130_fd_sc_hd__dfrtp_4) + 3.26 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.15 1.87 clock reconvergence pessimism + -0.09 1.77 library hold time + 1.77 data required time +----------------------------------------------------------------------------- + 1.77 data required time + -3.26 data arrival time +----------------------------------------------------------------------------- + 1.49 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.74 2.20 ^ _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.09 0.00 2.20 ^ hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.06 3.27 ^ hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.17 0.00 3.27 ^ _129_/D (sky130_fd_sc_hd__dfrtp_4) + 3.27 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.01 clock uncertainty + -0.15 1.86 clock reconvergence pessimism + -0.10 1.76 library hold time + 1.76 data required time +----------------------------------------------------------------------------- + 1.76 data required time + -3.27 data arrival time +----------------------------------------------------------------------------- + 1.51 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.09 0.00 2.21 ^ hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.21 1.10 3.30 ^ hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.21 0.00 3.30 ^ _130_/D (sky130_fd_sc_hd__dfrtp_4) + 3.30 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.12 1.90 clock reconvergence pessimism + -0.11 1.79 library hold time + 1.79 data required time +----------------------------------------------------------------------------- + 1.79 data required time + -3.30 data arrival time +----------------------------------------------------------------------------- + 1.51 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 0.77 2.24 ^ _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.10 0.00 2.24 ^ hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.07 3.31 ^ hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.17 0.00 3.31 ^ _123_/D (sky130_fd_sc_hd__dfrtp_4) + 3.31 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.01 clock uncertainty + -0.12 1.89 clock reconvergence pessimism + -0.10 1.79 library hold time + 1.79 data required time +----------------------------------------------------------------------------- + 1.79 data required time + -3.31 data arrival time +----------------------------------------------------------------------------- + 1.53 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 0.78 2.24 ^ _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.11 0.00 2.24 ^ hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.18 1.08 3.33 ^ hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.18 0.00 3.33 ^ _121_/D (sky130_fd_sc_hd__dfrtp_4) + 3.33 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.15 1.87 clock reconvergence pessimism + -0.10 1.77 library hold time + 1.77 data required time +----------------------------------------------------------------------------- + 1.77 data required time + -3.33 data arrival time +----------------------------------------------------------------------------- + 1.56 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 0.78 2.25 ^ _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.11 0.00 2.25 ^ hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.20 1.10 3.35 ^ hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.20 0.00 3.35 ^ _122_/D (sky130_fd_sc_hd__dfrtp_4) + 3.35 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.02 clock uncertainty + -0.15 1.87 clock reconvergence pessimism + -0.11 1.76 library hold time + 1.76 data required time +----------------------------------------------------------------------------- + 1.76 data required time + -3.35 data arrival time +----------------------------------------------------------------------------- + 1.59 slack (MET) + + +Startpoint: serial_data_in (input port clocked by serial_clock) +Endpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ serial_data_in (in) + 2 0.01 serial_data_in (net) + 5.00 0.00 10.00 ^ input5/A (sky130_fd_sc_hd__buf_2) + 0.20 1.15 11.15 ^ input5/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net5 (net) + 0.20 0.00 11.15 ^ _119_/D (sky130_fd_sc_hd__dfrtp_4) + 11.15 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.30 1.61 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.61 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 2.01 clock uncertainty + 0.00 2.01 clock reconvergence pessimism + -0.11 1.90 library hold time + 1.90 data required time +----------------------------------------------------------------------------- + 1.90 data required time + -11.15 data arrival time +----------------------------------------------------------------------------- + 9.25 slack (MET) + + +Startpoint: serial_clock (clock source 'serial_clock') +Endpoint: serial_clock_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ serial_clock_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.41 0.46 1.92 ^ serial_clock_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_clock_out (net) + 0.41 0.01 1.93 ^ serial_clock_out (out) + 1.93 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.93 data arrival time +----------------------------------------------------------------------------- + 11.53 slack (MET) + + +Startpoint: serial_load (clock source 'serial_load') +Endpoint: serial_load_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 1.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.49 ^ serial_load_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.41 0.46 1.95 ^ serial_load_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_load_out (net) + 0.41 0.03 1.98 ^ serial_load_out (out) + 1.98 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.98 data arrival time +----------------------------------------------------------------------------- + 11.58 slack (MET) + + +Startpoint: resetn (input port) +Endpoint: resetn_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 ^ input external delay + 5.00 0.00 0.00 ^ resetn (in) + 2 0.01 resetn (net) + 5.00 0.00 0.00 ^ input4/A (sky130_fd_sc_hd__buf_2) + 0.17 1.09 1.09 ^ input4/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net4 (net) + 0.17 0.00 1.09 ^ fanout31/A (sky130_fd_sc_hd__buf_2) + 0.18 0.31 1.40 ^ fanout31/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net31 (net) + 0.18 0.00 1.40 ^ fanout30/A (sky130_fd_sc_hd__buf_2) + 0.25 0.36 1.76 ^ fanout30/X (sky130_fd_sc_hd__buf_2) + 8 0.03 net30 (net) + 0.25 0.00 1.76 ^ fanout29/A (sky130_fd_sc_hd__buf_2) + 0.16 0.33 2.09 ^ fanout29/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net29 (net) + 0.16 0.00 2.09 ^ _134_/A (sky130_fd_sc_hd__buf_2) + 0.16 0.29 2.39 ^ _134_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net20 (net) + 0.16 0.00 2.39 ^ output20/A (sky130_fd_sc_hd__buf_16) + 0.41 0.44 2.83 ^ output20/X (sky130_fd_sc_hd__buf_16) + 1 0.25 resetn_out (net) + 0.41 0.01 2.84 ^ resetn_out (out) + 2.84 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -2.84 data arrival time +----------------------------------------------------------------------------- + 12.44 slack (MET) + + +Startpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 1.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.47 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.54 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 1.54 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.15 1.01 2.54 ^ _117_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net9 (net) + 0.15 0.00 2.54 ^ output9/A (sky130_fd_sc_hd__buf_16) + 0.40 0.43 2.97 ^ output9/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_sel (net) + 0.40 0.02 2.99 ^ pad_gpio_ana_sel (out) + 2.99 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -2.99 data arrival time +----------------------------------------------------------------------------- + 12.59 slack (MET) + + +Startpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_pol (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 1.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.47 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.54 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 1.54 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.16 1.01 2.55 ^ _118_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net8 (net) + 0.16 0.00 2.55 ^ output8/A (sky130_fd_sc_hd__buf_16) + 0.40 0.44 2.99 ^ output8/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_pol (net) + 0.40 0.01 2.99 ^ pad_gpio_ana_pol (out) + 2.99 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -2.99 data arrival time +----------------------------------------------------------------------------- + 12.59 slack (MET) + + +Startpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ib_mode_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 1.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.47 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.55 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 1.55 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.16 1.02 2.57 ^ _111_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net14 (net) + 0.16 0.00 2.57 ^ output14/A (sky130_fd_sc_hd__buf_16) + 0.40 0.43 3.00 ^ output14/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ib_mode_sel (net) + 0.40 0.01 3.01 ^ pad_gpio_ib_mode_sel (out) + 3.01 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.01 data arrival time +----------------------------------------------------------------------------- + 12.61 slack (MET) + + +Startpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_slow_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 1.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.47 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.55 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 1.55 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.16 1.02 2.57 ^ _108_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net18 (net) + 0.16 0.00 2.57 ^ output18/A (sky130_fd_sc_hd__buf_16) + 0.40 0.44 3.00 ^ output18/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_slow_sel (net) + 0.40 0.01 3.01 ^ pad_gpio_slow_sel (out) + 3.01 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.01 data arrival time +----------------------------------------------------------------------------- + 12.61 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[0] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 1.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.47 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 1.54 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 1.54 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.17 1.03 2.57 ^ _113_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net10 (net) + 0.17 0.00 2.57 ^ output10/A (sky130_fd_sc_hd__buf_16) + 0.40 0.44 3.01 ^ output10/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[0] (net) + 0.40 0.01 3.02 ^ pad_gpio_dm[0] (out) + 3.02 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.02 data arrival time +----------------------------------------------------------------------------- + 12.62 slack (MET) + + +Startpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_en (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 1.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.47 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 1.54 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 1.54 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.17 1.02 2.57 ^ _116_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net7 (net) + 0.17 0.00 2.57 ^ output7/A (sky130_fd_sc_hd__buf_16) + 0.40 0.44 3.00 ^ output7/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_en (net) + 0.40 0.01 3.02 ^ pad_gpio_ana_en (out) + 3.02 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.02 data arrival time +----------------------------------------------------------------------------- + 12.62 slack (MET) + + +Startpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_vtrip_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 1.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.49 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 1.56 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 1.56 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.16 1.02 2.58 ^ _109_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net19 (net) + 0.16 0.00 2.58 ^ output19/A (sky130_fd_sc_hd__buf_16) + 0.41 0.44 3.02 ^ output19/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_vtrip_sel (net) + 0.41 0.01 3.03 ^ pad_gpio_vtrip_sel (out) + 3.03 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.03 data arrival time +----------------------------------------------------------------------------- + 12.63 slack (MET) + + +Startpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_inenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 1.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.49 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 1.58 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 1.58 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.18 1.04 2.62 ^ _110_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net15 (net) + 0.18 0.00 2.62 ^ output15/A (sky130_fd_sc_hd__buf_16) + 0.40 0.44 3.06 ^ output15/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_inenb (net) + 0.40 0.01 3.07 ^ pad_gpio_inenb (out) + 3.07 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.07 data arrival time +----------------------------------------------------------------------------- + 12.67 slack (MET) + + +Startpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_holdover (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 1.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.49 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 1.58 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 1.58 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.18 1.04 2.61 ^ _107_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net13 (net) + 0.18 0.00 2.62 ^ output13/A (sky130_fd_sc_hd__buf_16) + 0.40 0.44 3.05 ^ output13/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_holdover (net) + 0.40 0.02 3.07 ^ pad_gpio_holdover (out) + 3.07 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.07 data arrival time +----------------------------------------------------------------------------- + 12.67 slack (MET) + + +Startpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[2] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 1.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.49 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 1.58 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 1.58 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.19 1.05 2.62 ^ _115_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net12 (net) + 0.19 0.00 2.63 ^ output12/A (sky130_fd_sc_hd__buf_16) + 0.40 0.45 3.07 ^ output12/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[2] (net) + 0.40 0.02 3.09 ^ pad_gpio_dm[2] (out) + 3.09 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.09 data arrival time +----------------------------------------------------------------------------- + 12.69 slack (MET) + + +Startpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[1] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 1.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.49 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.09 1.58 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 1.58 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.20 1.06 2.64 ^ _114_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net11 (net) + 0.20 0.00 2.64 ^ output11/A (sky130_fd_sc_hd__buf_16) + 0.40 0.46 3.10 ^ output11/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[1] (net) + 0.40 0.01 3.10 ^ pad_gpio_dm[1] (out) + 3.10 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.10 data arrival time +----------------------------------------------------------------------------- + 12.70 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 1.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.47 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.07 1.54 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 1.54 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.08 0.74 2.29 v _113_/Q_N (sky130_fd_sc_hd__dfbbn_2) + 1 0.00 _000_ (net) + 0.08 0.00 2.29 v _064_/A_N (sky130_fd_sc_hd__and2b_2) + 0.12 0.45 2.73 ^ _064_/X (sky130_fd_sc_hd__and2b_2) + 1 0.01 _044_ (net) + 0.12 0.00 2.73 ^ _066_/A1 (sky130_fd_sc_hd__o21ai_4) + 0.08 0.15 2.88 v _066_/Y (sky130_fd_sc_hd__o21ai_4) + 1 0.01 net16 (net) + 0.08 0.00 2.88 v output16/A (sky130_fd_sc_hd__buf_16) + 0.22 0.35 3.24 v output16/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_out (net) + 0.22 0.01 3.25 v pad_gpio_out (out) + 3.25 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 12.85 slack (MET) + + +Startpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_outenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 1.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.49 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 1.58 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.05 0.00 1.58 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.15 1.01 2.59 ^ _106_/Q (sky130_fd_sc_hd__dfbbn_2) + 3 0.02 mgmt_ena (net) + 0.15 0.00 2.59 ^ _061_/S (sky130_fd_sc_hd__mux2_4) + 0.11 0.36 2.96 ^ _061_/X (sky130_fd_sc_hd__mux2_4) + 1 0.02 net17 (net) + 0.11 0.00 2.96 ^ output17/A (sky130_fd_sc_hd__buf_16) + 0.40 0.41 3.37 ^ output17/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_outenb (net) + 0.40 0.02 3.39 ^ pad_gpio_outenb (out) + 3.39 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -3.39 data arrival time +----------------------------------------------------------------------------- + 12.99 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: mgmt_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 ^ input3/A (sky130_fd_sc_hd__buf_2) + 0.16 1.07 11.08 ^ input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.16 0.00 11.08 ^ _133_/A (sky130_fd_sc_hd__buf_2) + 0.15 0.28 11.35 ^ _133_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net6 (net) + 0.15 0.00 11.36 ^ output6/A (sky130_fd_sc_hd__buf_16) + 0.40 0.43 11.79 ^ output6/X (sky130_fd_sc_hd__buf_16) + 1 0.25 mgmt_gpio_in (net) + 0.40 0.01 11.80 ^ mgmt_gpio_in (out) + 11.80 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -11.80 data arrival time +----------------------------------------------------------------------------- + 21.40 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: user_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 ^ input3/A (sky130_fd_sc_hd__buf_2) + 0.16 1.07 11.08 ^ input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.16 0.00 11.08 ^ _067_/B (sky130_fd_sc_hd__and2_2) + 0.25 0.43 11.51 ^ _067_/X (sky130_fd_sc_hd__and2_2) + 1 0.03 net22 (net) + 0.25 0.00 11.51 ^ output22/A (sky130_fd_sc_hd__buf_16) + 0.40 0.48 11.99 ^ output22/X (sky130_fd_sc_hd__buf_16) + 1 0.25 user_gpio_in (net) + 0.40 0.01 11.99 ^ user_gpio_in (out) + 11.99 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -11.99 data arrival time +----------------------------------------------------------------------------- + 21.59 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 51.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 51.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 51.46 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 0.78 52.24 ^ _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.11 0.00 52.24 ^ _132_/D (sky130_fd_sc_hd__dfrtp_2) + 52.24 data arrival time + + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 1.68 26.68 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 26.68 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.07 0.34 27.01 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.07 0.00 27.02 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.09 0.11 27.13 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.09 0.00 27.13 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.40 27.53 clock uncertainty + -0.12 27.40 clock reconvergence pessimism + -0.08 27.32 library hold time + 27.32 data required time +----------------------------------------------------------------------------- + 27.32 data required time + -52.24 data arrival time +----------------------------------------------------------------------------- + 24.92 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 1.52 26.52 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 26.52 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.07 0.30 26.82 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.07 0.00 26.82 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.09 0.10 26.92 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.09 0.00 26.92 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.16 0.74 27.67 ^ _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.16 0.00 27.67 ^ output21/A (sky130_fd_sc_hd__buf_16) + 0.40 0.44 28.11 ^ output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.40 0.01 28.11 ^ serial_data_out (out) + 28.11 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -28.11 data arrival time +----------------------------------------------------------------------------- + 37.71 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.09 0.00 2.21 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.12 1.02 3.24 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.00 net49 (net) + 0.12 0.00 3.24 ^ _114_/D (sky130_fd_sc_hd__dfbbn_2) + 3.24 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.06 0.10 1.75 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.06 0.00 1.75 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.15 clock uncertainty + 0.00 2.15 clock reconvergence pessimism + 0.06 2.21 library hold time + 2.21 data required time +----------------------------------------------------------------------------- + 2.21 data required time + -3.24 data arrival time +----------------------------------------------------------------------------- + 1.02 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 0.78 2.24 ^ _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.11 0.00 2.24 ^ hold3/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 1.00 3.25 ^ hold3/X (sky130_fd_sc_hd__dlygate4sd3_1) + 1 0.00 net48 (net) + 0.09 0.00 3.25 ^ _115_/D (sky130_fd_sc_hd__dfbbn_2) + 3.25 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.05 0.00 1.74 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.07 2.21 library hold time + 2.21 data required time +----------------------------------------------------------------------------- + 2.21 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 1.03 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.20 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.09 0.00 2.20 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.03 3.24 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.13 0.00 3.24 ^ _111_/D (sky130_fd_sc_hd__dfbbn_2) + 3.24 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.04 0.00 1.71 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.06 2.17 library hold time + 2.17 data required time +----------------------------------------------------------------------------- + 2.17 data required time + -3.24 data arrival time +----------------------------------------------------------------------------- + 1.07 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.08 0.74 2.20 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.08 0.00 2.20 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.07 3.27 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.17 0.00 3.27 ^ _106_/D (sky130_fd_sc_hd__dfbbn_2) + 3.27 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.05 0.00 1.74 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.05 2.19 library hold time + 2.19 data required time +----------------------------------------------------------------------------- + 2.19 data required time + -3.27 data arrival time +----------------------------------------------------------------------------- + 1.07 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.22 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.09 0.00 2.22 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.04 3.25 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.13 0.00 3.25 ^ _108_/D (sky130_fd_sc_hd__dfbbn_2) + 3.25 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.09 1.71 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 1.71 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.06 2.17 library hold time + 2.17 data required time +----------------------------------------------------------------------------- + 2.17 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 1.09 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.09 0.00 2.21 ^ hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.04 3.25 ^ hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.13 0.00 3.25 ^ _117_/D (sky130_fd_sc_hd__dfbbn_2) + 3.25 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.03 0.00 1.70 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.05 2.15 library hold time + 2.15 data required time +----------------------------------------------------------------------------- + 2.15 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 1.10 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.22 ^ _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.09 0.00 2.22 ^ hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 1.04 3.25 ^ hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.13 0.00 3.25 ^ _118_/D (sky130_fd_sc_hd__dfbbn_2) + 3.25 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.03 0.07 1.70 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.03 0.00 1.70 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.05 2.15 library hold time + 2.15 data required time +----------------------------------------------------------------------------- + 2.15 data required time + -3.25 data arrival time +----------------------------------------------------------------------------- + 1.10 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.74 2.20 ^ _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.09 0.00 2.20 ^ hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.06 3.27 ^ hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.17 0.00 3.27 ^ _109_/D (sky130_fd_sc_hd__dfbbn_2) + 3.27 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.72 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.04 0.00 1.72 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.12 clock uncertainty + 0.00 2.12 clock reconvergence pessimism + 0.05 2.17 library hold time + 2.17 data required time +----------------------------------------------------------------------------- + 2.17 data required time + -3.27 data arrival time +----------------------------------------------------------------------------- + 1.10 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.09 0.00 2.21 ^ hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.15 1.05 3.26 ^ hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.15 0.00 3.26 ^ _116_/D (sky130_fd_sc_hd__dfbbn_2) + 3.26 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.71 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.04 0.00 1.71 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.11 clock uncertainty + 0.00 2.11 clock reconvergence pessimism + 0.05 2.16 library hold time + 2.16 data required time +----------------------------------------------------------------------------- + 2.16 data required time + -3.26 data arrival time +----------------------------------------------------------------------------- + 1.11 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.10 0.77 2.24 ^ _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.10 0.00 2.24 ^ hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.17 1.07 3.31 ^ hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.17 0.00 3.31 ^ _110_/D (sky130_fd_sc_hd__dfbbn_2) + 3.31 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.05 0.00 1.74 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.05 2.19 library hold time + 2.19 data required time +----------------------------------------------------------------------------- + 2.19 data required time + -3.31 data arrival time +----------------------------------------------------------------------------- + 1.12 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _112_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 0.78 2.24 ^ _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.11 0.00 2.24 ^ hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.18 1.08 3.33 ^ hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.18 0.00 3.33 ^ _112_/D (sky130_fd_sc_hd__dfbbn_2) + 3.33 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.04 0.09 1.73 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.04 0.00 1.73 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.13 clock uncertainty + 0.00 2.13 clock reconvergence pessimism + 0.04 2.17 library hold time + 2.17 data required time +----------------------------------------------------------------------------- + 2.17 data required time + -3.33 data arrival time +----------------------------------------------------------------------------- + 1.16 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.27 1.46 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.08 0.00 1.46 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.09 0.75 2.21 ^ _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.09 0.00 2.21 ^ hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.21 1.10 3.30 ^ hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.21 0.00 3.30 ^ _113_/D (sky130_fd_sc_hd__dfbbn_2) + 3.30 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.32 1.62 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 1.63 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 1.70 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.04 0.00 1.70 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.10 clock uncertainty + 0.00 2.10 clock reconvergence pessimism + 0.03 2.14 library hold time + 2.14 data required time +----------------------------------------------------------------------------- + 2.14 data required time + -3.30 data arrival time +----------------------------------------------------------------------------- + 1.16 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 1.18 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.19 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.28 1.46 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.47 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.11 0.78 2.25 ^ _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.11 0.00 2.25 ^ hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.20 1.10 3.35 ^ hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.20 0.00 3.35 ^ _107_/D (sky130_fd_sc_hd__dfbbn_2) + 3.35 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.30 1.30 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 1.30 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.34 1.64 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 1.64 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.10 1.74 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 1.74 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 2.14 clock uncertainty + 0.00 2.14 clock reconvergence pessimism + 0.04 2.19 library hold time + 2.19 data required time +----------------------------------------------------------------------------- + 2.19 data required time + -3.35 data arrival time +----------------------------------------------------------------------------- + 1.17 slack (MET) + + + +======================= Typical Corner =================================== + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 ^ _068_/B (sky130_fd_sc_hd__or2_0) + 0.07 0.29 10.29 ^ _068_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _001_ (net) + 0.07 0.00 10.29 ^ _106_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.29 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.91 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -10.29 data arrival time +----------------------------------------------------------------------------- + 8.91 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 ^ _082_/B (sky130_fd_sc_hd__or2_0) + 0.06 0.28 10.28 ^ _082_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _015_ (net) + 0.06 0.00 10.28 ^ _113_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.28 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.89 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.07 1.36 library removal time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -10.28 data arrival time +----------------------------------------------------------------------------- + 8.92 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 ^ _070_/B (sky130_fd_sc_hd__or2_0) + 0.08 0.30 10.30 ^ _070_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _003_ (net) + 0.08 0.00 10.30 ^ _107_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.30 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.91 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -10.30 data arrival time +----------------------------------------------------------------------------- + 8.92 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 ^ _092_/B (sky130_fd_sc_hd__or2_0) + 0.06 0.28 10.28 ^ _092_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _025_ (net) + 0.06 0.00 10.28 ^ _118_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.28 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.88 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.07 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.28 data arrival time +----------------------------------------------------------------------------- + 8.93 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 ^ _090_/B (sky130_fd_sc_hd__or2_0) + 0.07 0.29 10.29 ^ _090_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _023_ (net) + 0.07 0.00 10.29 ^ _117_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.29 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.88 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.07 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.29 data arrival time +----------------------------------------------------------------------------- + 8.94 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 ^ _084_/B (sky130_fd_sc_hd__or2_0) + 0.12 0.33 10.33 ^ _084_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _017_ (net) + 0.12 0.00 10.33 ^ _114_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.33 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 0.91 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 0.91 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.06 1.37 library removal time + 1.37 data required time +----------------------------------------------------------------------------- + 1.37 data required time + -10.33 data arrival time +----------------------------------------------------------------------------- + 8.96 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 ^ _074_/B (sky130_fd_sc_hd__or2_0) + 0.10 0.32 10.32 ^ _074_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _007_ (net) + 0.10 0.00 10.32 ^ _109_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.32 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.90 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.90 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.30 clock uncertainty + 0.00 1.30 clock reconvergence pessimism + 0.06 1.36 library removal time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -10.32 data arrival time +----------------------------------------------------------------------------- + 8.96 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 ^ _078_/B (sky130_fd_sc_hd__or2_0) + 0.10 0.32 10.32 ^ _078_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _011_ (net) + 0.10 0.00 10.32 ^ _111_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.32 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 0.89 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.06 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.32 data arrival time +----------------------------------------------------------------------------- + 8.97 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 ^ _076_/B (sky130_fd_sc_hd__or2_0) + 0.13 0.33 10.33 ^ _076_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _009_ (net) + 0.13 0.00 10.33 ^ _110_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.33 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.91 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.06 1.37 library removal time + 1.37 data required time +----------------------------------------------------------------------------- + 1.37 data required time + -10.33 data arrival time +----------------------------------------------------------------------------- + 8.97 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 ^ _088_/B (sky130_fd_sc_hd__or2_0) + 0.10 0.31 10.31 ^ _088_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _021_ (net) + 0.10 0.00 10.31 ^ _116_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.31 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.89 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.06 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.31 data arrival time +----------------------------------------------------------------------------- + 8.97 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 ^ _080_/B (sky130_fd_sc_hd__or2_0) + 0.12 0.33 10.33 ^ _080_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _013_ (net) + 0.12 0.00 10.33 ^ _112_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.33 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.90 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.03 0.00 0.90 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.30 clock uncertainty + 0.00 1.30 clock reconvergence pessimism + 0.06 1.36 library removal time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -10.33 data arrival time +----------------------------------------------------------------------------- + 8.97 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 ^ _086_/B (sky130_fd_sc_hd__or2_0) + 0.15 0.35 10.35 ^ _086_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _019_ (net) + 0.15 0.00 10.35 ^ _115_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.35 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 0.91 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.05 1.36 library removal time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -10.35 data arrival time +----------------------------------------------------------------------------- + 8.99 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 ^ _072_/B (sky130_fd_sc_hd__or2_0) + 0.14 0.34 10.34 ^ _072_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _005_ (net) + 0.14 0.00 10.34 ^ _108_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 10.34 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 0.89 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.05 1.34 library removal time + 1.34 data required time +----------------------------------------------------------------------------- + 1.34 data required time + -10.34 data arrival time +----------------------------------------------------------------------------- + 9.00 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 v _083_/B (sky130_fd_sc_hd__nand2b_2) + 0.04 0.95 10.95 ^ _083_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _016_ (net) + 0.04 0.00 10.95 ^ _113_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.95 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.89 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.07 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.95 data arrival time +----------------------------------------------------------------------------- + 9.60 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 v _071_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 0.99 10.99 ^ _071_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _004_ (net) + 0.05 0.00 10.99 ^ _107_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.99 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.91 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -10.99 data arrival time +----------------------------------------------------------------------------- + 9.61 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 v _075_/B (sky130_fd_sc_hd__nand2b_2) + 0.04 0.98 10.98 ^ _075_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _008_ (net) + 0.04 0.00 10.98 ^ _109_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.98 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.90 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.90 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.30 clock uncertainty + 0.00 1.30 clock reconvergence pessimism + 0.07 1.36 library removal time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -10.98 data arrival time +----------------------------------------------------------------------------- + 9.62 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 v _093_/B (sky130_fd_sc_hd__nand2b_2) + 0.04 0.98 10.98 ^ _093_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _026_ (net) + 0.04 0.00 10.98 ^ _118_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.98 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.88 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.07 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.98 data arrival time +----------------------------------------------------------------------------- + 9.63 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 v _091_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 0.99 10.99 ^ _091_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _024_ (net) + 0.05 0.00 10.99 ^ _117_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.99 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.88 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.07 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -10.99 data arrival time +----------------------------------------------------------------------------- + 9.65 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 v _073_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.01 11.01 ^ _073_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _006_ (net) + 0.05 0.00 11.01 ^ _108_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.01 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 0.89 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.07 1.36 library removal time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -11.01 data arrival time +----------------------------------------------------------------------------- + 9.65 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 v _081_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.05 11.05 ^ _081_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _014_ (net) + 0.05 0.00 11.05 ^ _112_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.90 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.03 0.00 0.90 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.30 clock uncertainty + 0.00 1.30 clock reconvergence pessimism + 0.07 1.37 library removal time + 1.37 data required time +----------------------------------------------------------------------------- + 1.37 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 9.68 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 v _069_/B (sky130_fd_sc_hd__nand2b_2) + 0.06 1.08 11.08 ^ _069_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _002_ (net) + 0.06 0.00 11.08 ^ _106_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.08 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.91 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -11.08 data arrival time +----------------------------------------------------------------------------- + 9.70 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 v _077_/B (sky130_fd_sc_hd__nand2b_2) + 0.06 1.08 11.08 ^ _077_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _010_ (net) + 0.06 0.00 11.09 ^ _110_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.09 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.91 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -11.09 data arrival time +----------------------------------------------------------------------------- + 9.71 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 v _085_/B (sky130_fd_sc_hd__nand2b_2) + 0.06 1.10 11.10 ^ _085_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _018_ (net) + 0.06 0.00 11.10 ^ _114_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.10 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 0.91 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 0.91 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.38 library removal time + 1.38 data required time +----------------------------------------------------------------------------- + 1.38 data required time + -11.10 data arrival time +----------------------------------------------------------------------------- + 9.72 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 v _089_/B (sky130_fd_sc_hd__nand2b_2) + 0.06 1.08 11.08 ^ _089_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _022_ (net) + 0.06 0.00 11.08 ^ _116_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.08 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.89 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.06 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -11.08 data arrival time +----------------------------------------------------------------------------- + 9.73 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 v _079_/B (sky130_fd_sc_hd__nand2b_2) + 0.06 1.10 11.10 ^ _079_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _012_ (net) + 0.06 0.00 11.10 ^ _111_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.10 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 0.89 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.06 1.35 library removal time + 1.35 data required time +----------------------------------------------------------------------------- + 1.35 data required time + -11.10 data arrival time +----------------------------------------------------------------------------- + 9.75 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.07 1.14 11.15 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.07 0.00 11.15 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.15 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 0.91 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.07 1.37 library removal time + 1.37 data required time +----------------------------------------------------------------------------- + 1.37 data required time + -11.15 data arrival time +----------------------------------------------------------------------------- + 9.77 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.05 0.00 1.13 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.66 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.08 0.00 1.66 ^ _124_/D (sky130_fd_sc_hd__dfrtp_4) + 1.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.04 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.52 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.05 0.00 1.13 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.53 1.66 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.07 0.00 1.66 ^ _131_/D (sky130_fd_sc_hd__dfrtp_4) + 1.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.24 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.04 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.52 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.14 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.05 0.00 1.14 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.08 0.00 1.67 ^ _128_/D (sky130_fd_sc_hd__dfrtp_4) + 1.67 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.24 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.04 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.53 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.36 1.12 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.04 0.00 1.12 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.55 1.68 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.11 0.00 1.68 ^ _120_/D (sky130_fd_sc_hd__dfrtp_4) + 1.68 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.06 1.19 clock reconvergence pessimism + -0.05 1.14 library hold time + 1.14 data required time +----------------------------------------------------------------------------- + 1.14 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.54 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.05 0.00 1.13 ^ hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.08 0.00 1.67 ^ _126_/D (sky130_fd_sc_hd__dfrtp_4) + 1.67 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.08 1.17 clock reconvergence pessimism + -0.04 1.13 library hold time + 1.13 data required time +----------------------------------------------------------------------------- + 1.13 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.54 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.05 0.00 1.13 ^ hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.08 0.00 1.67 ^ _127_/D (sky130_fd_sc_hd__dfrtp_4) + 1.67 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.08 1.17 clock reconvergence pessimism + -0.04 1.13 library hold time + 1.13 data required time +----------------------------------------------------------------------------- + 1.13 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.54 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.05 0.00 1.13 ^ hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.54 1.68 ^ hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.09 0.00 1.68 ^ _125_/D (sky130_fd_sc_hd__dfrtp_4) + 1.68 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.08 1.17 clock reconvergence pessimism + -0.04 1.12 library hold time + 1.12 data required time +----------------------------------------------------------------------------- + 1.12 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.55 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.05 0.00 1.13 ^ hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.10 0.55 1.68 ^ hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.10 0.00 1.68 ^ _129_/D (sky130_fd_sc_hd__dfrtp_4) + 1.68 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.24 clock uncertainty + -0.08 1.16 clock reconvergence pessimism + -0.05 1.12 library hold time + 1.12 data required time +----------------------------------------------------------------------------- + 1.12 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.56 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.05 0.00 1.13 ^ hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 0.57 1.70 ^ hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.13 0.00 1.70 ^ _130_/D (sky130_fd_sc_hd__dfrtp_4) + 1.70 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.05 1.13 library hold time + 1.13 data required time +----------------------------------------------------------------------------- + 1.13 data required time + -1.70 data arrival time +----------------------------------------------------------------------------- + 0.57 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.38 1.15 ^ _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.06 0.00 1.15 ^ hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.56 1.70 ^ hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.11 0.00 1.70 ^ _123_/D (sky130_fd_sc_hd__dfrtp_4) + 1.70 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.24 clock uncertainty + -0.06 1.18 clock reconvergence pessimism + -0.05 1.13 library hold time + 1.13 data required time +----------------------------------------------------------------------------- + 1.13 data required time + -1.70 data arrival time +----------------------------------------------------------------------------- + 0.57 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.38 1.15 ^ _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.06 0.00 1.15 ^ hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.56 1.71 ^ hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.11 0.00 1.71 ^ _121_/D (sky130_fd_sc_hd__dfrtp_4) + 1.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.08 1.17 clock reconvergence pessimism + -0.05 1.12 library hold time + 1.12 data required time +----------------------------------------------------------------------------- + 1.12 data required time + -1.71 data arrival time +----------------------------------------------------------------------------- + 0.59 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.39 1.15 ^ _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.06 0.00 1.15 ^ hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.12 0.57 1.73 ^ hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.12 0.00 1.73 ^ _122_/D (sky130_fd_sc_hd__dfrtp_4) + 1.73 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.25 clock uncertainty + -0.08 1.17 clock reconvergence pessimism + -0.05 1.12 library hold time + 1.12 data required time +----------------------------------------------------------------------------- + 1.12 data required time + -1.73 data arrival time +----------------------------------------------------------------------------- + 0.61 slack (MET) + + +Startpoint: serial_data_in (input port clocked by serial_clock) +Endpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ serial_data_in (in) + 2 0.01 serial_data_in (net) + 5.00 0.00 10.00 ^ input5/A (sky130_fd_sc_hd__buf_2) + 0.16 0.56 10.57 ^ input5/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net5 (net) + 0.16 0.00 10.57 ^ _119_/D (sky130_fd_sc_hd__dfrtp_4) + 10.57 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.19 0.84 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.84 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 1.24 clock uncertainty + 0.00 1.24 clock reconvergence pessimism + -0.06 1.18 library hold time + 1.18 data required time +----------------------------------------------------------------------------- + 1.18 data required time + -10.57 data arrival time +----------------------------------------------------------------------------- + 9.38 slack (MET) + + +Startpoint: serial_clock (clock source 'serial_clock') +Endpoint: serial_clock_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ serial_clock_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.27 0.28 1.04 ^ serial_clock_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_clock_out (net) + 0.27 0.01 1.05 ^ serial_clock_out (out) + 1.05 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.05 data arrival time +----------------------------------------------------------------------------- + 10.65 slack (MET) + + +Startpoint: serial_load (clock source 'serial_load') +Endpoint: serial_load_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 0.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.78 ^ serial_load_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.27 0.27 1.05 ^ serial_load_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_load_out (net) + 0.28 0.03 1.08 ^ serial_load_out (out) + 1.08 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.08 data arrival time +----------------------------------------------------------------------------- + 10.68 slack (MET) + + +Startpoint: resetn (input port) +Endpoint: resetn_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 ^ input external delay + 5.00 0.00 0.00 ^ resetn (in) + 2 0.01 resetn (net) + 5.00 0.00 0.00 ^ input4/A (sky130_fd_sc_hd__buf_2) + 0.15 0.50 0.50 ^ input4/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net4 (net) + 0.15 0.00 0.50 ^ fanout31/A (sky130_fd_sc_hd__buf_2) + 0.12 0.18 0.69 ^ fanout31/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net31 (net) + 0.12 0.00 0.69 ^ fanout30/A (sky130_fd_sc_hd__buf_2) + 0.15 0.20 0.89 ^ fanout30/X (sky130_fd_sc_hd__buf_2) + 8 0.03 net30 (net) + 0.15 0.00 0.89 ^ fanout29/A (sky130_fd_sc_hd__buf_2) + 0.11 0.18 1.07 ^ fanout29/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net29 (net) + 0.11 0.00 1.07 ^ _134_/A (sky130_fd_sc_hd__buf_2) + 0.10 0.16 1.23 ^ _134_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net20 (net) + 0.10 0.00 1.23 ^ output20/A (sky130_fd_sc_hd__buf_16) + 0.28 0.27 1.50 ^ output20/X (sky130_fd_sc_hd__buf_16) + 1 0.25 resetn_out (net) + 0.28 0.01 1.51 ^ resetn_out (out) + 1.51 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.51 data arrival time +----------------------------------------------------------------------------- + 11.11 slack (MET) + + +Startpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 0.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.77 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.80 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.80 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.05 0.59 1.39 v _117_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net9 (net) + 0.05 0.00 1.39 v output9/A (sky130_fd_sc_hd__buf_16) + 0.14 0.20 1.59 v output9/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_sel (net) + 0.15 0.02 1.61 v pad_gpio_ana_sel (out) + 1.61 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.61 data arrival time +----------------------------------------------------------------------------- + 11.21 slack (MET) + + +Startpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_pol (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 0.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.77 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.80 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.80 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.59 1.39 v _118_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net8 (net) + 0.06 0.00 1.39 v output8/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.60 v output8/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_pol (net) + 0.14 0.01 1.61 v pad_gpio_ana_pol (out) + 1.61 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.61 data arrival time +----------------------------------------------------------------------------- + 11.21 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[0] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 0.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.77 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.80 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.80 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.60 1.40 v _113_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net10 (net) + 0.06 0.00 1.40 v output10/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.61 v output10/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[0] (net) + 0.14 0.01 1.62 v pad_gpio_dm[0] (out) + 1.62 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.62 data arrival time +----------------------------------------------------------------------------- + 11.22 slack (MET) + + +Startpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_slow_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 0.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.77 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.81 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 0.81 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.59 1.40 v _108_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net18 (net) + 0.06 0.00 1.40 v output18/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.61 v output18/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_slow_sel (net) + 0.14 0.01 1.62 v pad_gpio_slow_sel (out) + 1.62 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.62 data arrival time +----------------------------------------------------------------------------- + 11.22 slack (MET) + + +Startpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ib_mode_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 0.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.77 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.80 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 0.81 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.59 1.40 v _111_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net14 (net) + 0.06 0.00 1.40 v output14/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.60 v output14/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ib_mode_sel (net) + 0.14 0.01 1.62 v pad_gpio_ib_mode_sel (out) + 1.62 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.62 data arrival time +----------------------------------------------------------------------------- + 11.22 slack (MET) + + +Startpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_en (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 0.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.77 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.80 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.80 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.59 1.40 v _116_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net7 (net) + 0.06 0.00 1.40 v output7/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.61 v output7/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_en (net) + 0.14 0.01 1.62 v pad_gpio_ana_en (out) + 1.62 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.62 data arrival time +----------------------------------------------------------------------------- + 11.22 slack (MET) + + +Startpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_vtrip_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 0.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.78 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.81 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.81 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.59 1.40 v _109_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net19 (net) + 0.06 0.00 1.41 v output19/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.62 v output19/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_vtrip_sel (net) + 0.14 0.01 1.63 v pad_gpio_vtrip_sel (out) + 1.63 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.63 data arrival time +----------------------------------------------------------------------------- + 11.23 slack (MET) + + +Startpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_inenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 0.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.78 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.82 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.82 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.60 1.42 v _110_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net15 (net) + 0.06 0.00 1.43 v output15/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.64 v output15/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_inenb (net) + 0.14 0.01 1.65 v pad_gpio_inenb (out) + 1.65 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.65 data arrival time +----------------------------------------------------------------------------- + 11.25 slack (MET) + + +Startpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_holdover (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 0.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.78 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.82 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.82 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.06 0.60 1.42 v _107_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net13 (net) + 0.06 0.00 1.42 v output13/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.63 v output13/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_holdover (net) + 0.14 0.01 1.65 v pad_gpio_holdover (out) + 1.65 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.65 data arrival time +----------------------------------------------------------------------------- + 11.25 slack (MET) + + +Startpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[2] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 0.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.78 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.82 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 0.82 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.07 0.60 1.43 v _115_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net12 (net) + 0.07 0.00 1.43 v output12/A (sky130_fd_sc_hd__buf_16) + 0.14 0.21 1.64 v output12/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[2] (net) + 0.14 0.02 1.65 v pad_gpio_dm[2] (out) + 1.65 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.65 data arrival time +----------------------------------------------------------------------------- + 11.25 slack (MET) + + +Startpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[1] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 0.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.78 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 0.83 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 0.83 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.07 0.61 1.43 v _114_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net11 (net) + 0.07 0.00 1.44 v output11/A (sky130_fd_sc_hd__buf_16) + 0.14 0.22 1.65 v output11/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[1] (net) + 0.14 0.01 1.66 v pad_gpio_dm[1] (out) + 1.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 11.26 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.18 0.77 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.77 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.80 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.80 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.05 0.38 1.18 v _113_/Q_N (sky130_fd_sc_hd__dfbbn_2) + 1 0.00 _000_ (net) + 0.05 0.00 1.18 v _064_/A_N (sky130_fd_sc_hd__and2b_2) + 0.07 0.22 1.41 ^ _064_/X (sky130_fd_sc_hd__and2b_2) + 1 0.01 _044_ (net) + 0.07 0.00 1.41 ^ _066_/A1 (sky130_fd_sc_hd__o21ai_4) + 0.05 0.07 1.48 v _066_/Y (sky130_fd_sc_hd__o21ai_4) + 1 0.01 net16 (net) + 0.05 0.00 1.48 v output16/A (sky130_fd_sc_hd__buf_16) + 0.14 0.20 1.68 v output16/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_out (net) + 0.14 0.01 1.69 v pad_gpio_out (out) + 1.69 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.69 data arrival time +----------------------------------------------------------------------------- + 11.29 slack (MET) + + +Startpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_outenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 0.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 0.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.78 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.82 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.82 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.09 0.54 1.36 ^ _106_/Q (sky130_fd_sc_hd__dfbbn_2) + 3 0.02 mgmt_ena (net) + 0.09 0.00 1.36 ^ _061_/S (sky130_fd_sc_hd__mux2_4) + 0.07 0.18 1.54 ^ _061_/X (sky130_fd_sc_hd__mux2_4) + 1 0.02 net17 (net) + 0.07 0.00 1.54 ^ output17/A (sky130_fd_sc_hd__buf_16) + 0.27 0.25 1.79 ^ output17/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_outenb (net) + 0.27 0.02 1.81 ^ pad_gpio_outenb (out) + 1.81 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -1.81 data arrival time +----------------------------------------------------------------------------- + 11.41 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: mgmt_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 ^ input3/A (sky130_fd_sc_hd__buf_2) + 0.15 0.49 10.49 ^ input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.15 0.00 10.49 ^ _133_/A (sky130_fd_sc_hd__buf_2) + 0.09 0.17 10.66 ^ _133_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net6 (net) + 0.09 0.00 10.66 ^ output6/A (sky130_fd_sc_hd__buf_16) + 0.27 0.26 10.93 ^ output6/X (sky130_fd_sc_hd__buf_16) + 1 0.25 mgmt_gpio_in (net) + 0.27 0.01 10.93 ^ mgmt_gpio_in (out) + 10.93 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -10.93 data arrival time +----------------------------------------------------------------------------- + 20.53 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: user_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 ^ input3/A (sky130_fd_sc_hd__buf_2) + 0.15 0.49 10.49 ^ input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.15 0.00 10.49 ^ _067_/B (sky130_fd_sc_hd__and2_2) + 0.16 0.24 10.73 ^ _067_/X (sky130_fd_sc_hd__and2_2) + 1 0.03 net22 (net) + 0.16 0.00 10.74 ^ output22/A (sky130_fd_sc_hd__buf_16) + 0.27 0.28 11.01 ^ output22/X (sky130_fd_sc_hd__buf_16) + 1 0.25 user_gpio_in (net) + 0.27 0.01 11.02 ^ user_gpio_in (out) + 11.02 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -11.02 data arrival time +----------------------------------------------------------------------------- + 20.62 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 50.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 50.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 50.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 50.76 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.39 51.15 ^ _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.06 0.00 51.15 ^ _132_/D (sky130_fd_sc_hd__dfrtp_2) + 51.15 data arrival time + + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.54 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.22 26.77 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.77 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.07 26.84 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.84 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.40 27.24 clock uncertainty + -0.06 27.17 clock reconvergence pessimism + -0.04 27.14 library hold time + 27.14 data required time +----------------------------------------------------------------------------- + 27.14 data required time + -51.15 data arrival time +----------------------------------------------------------------------------- + 24.01 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.40 26.40 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.40 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.20 26.60 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.60 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.06 26.66 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.66 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.07 0.41 27.07 v _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.07 0.00 27.07 v output21/A (sky130_fd_sc_hd__buf_16) + 0.14 0.22 27.28 v output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.14 0.01 27.29 v serial_data_out (out) + 27.29 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -27.29 data arrival time +----------------------------------------------------------------------------- + 36.89 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.05 0.00 1.13 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.53 1.66 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.07 0.00 1.66 ^ _114_/D (sky130_fd_sc_hd__dfbbn_2) + 1.66 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 0.91 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.04 0.00 0.91 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.04 1.36 library hold time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.30 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.39 1.15 ^ _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.06 0.00 1.15 ^ hold3/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.51 1.66 ^ hold3/X (sky130_fd_sc_hd__dlygate4sd3_1) + 1 0.00 net48 (net) + 0.05 0.00 1.66 ^ _115_/D (sky130_fd_sc_hd__dfbbn_2) + 1.66 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 0.91 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.05 1.36 library hold time + 1.36 data required time +----------------------------------------------------------------------------- + 1.36 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.31 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.05 0.00 1.13 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.66 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.08 0.00 1.66 ^ _111_/D (sky130_fd_sc_hd__dfbbn_2) + 1.66 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.03 0.00 0.89 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.04 1.33 library hold time + 1.33 data required time +----------------------------------------------------------------------------- + 1.33 data required time + -1.66 data arrival time +----------------------------------------------------------------------------- + 0.33 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.36 1.12 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.04 0.00 1.12 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.55 1.68 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.11 0.00 1.68 ^ _106_/D (sky130_fd_sc_hd__dfbbn_2) + 1.68 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.91 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.03 1.34 library hold time + 1.34 data required time +----------------------------------------------------------------------------- + 1.34 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.33 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.14 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.05 0.00 1.14 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.08 0.00 1.67 ^ _108_/D (sky130_fd_sc_hd__dfbbn_2) + 1.67 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.89 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.03 0.00 0.89 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.04 1.33 library hold time + 1.33 data required time +----------------------------------------------------------------------------- + 1.33 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.34 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.05 0.00 1.13 ^ hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.08 0.00 1.67 ^ _118_/D (sky130_fd_sc_hd__dfbbn_2) + 1.67 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.88 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.04 1.32 library hold time + 1.32 data required time +----------------------------------------------------------------------------- + 1.32 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.35 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.05 0.00 1.13 ^ hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.53 1.67 ^ hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.08 0.00 1.67 ^ _117_/D (sky130_fd_sc_hd__dfbbn_2) + 1.67 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.88 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.88 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.28 clock uncertainty + 0.00 1.28 clock reconvergence pessimism + 0.03 1.32 library hold time + 1.32 data required time +----------------------------------------------------------------------------- + 1.32 data required time + -1.67 data arrival time +----------------------------------------------------------------------------- + 0.35 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.05 0.00 1.13 ^ hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.10 0.55 1.68 ^ hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.10 0.00 1.68 ^ _109_/D (sky130_fd_sc_hd__dfbbn_2) + 1.68 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.90 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.90 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.30 clock uncertainty + 0.00 1.30 clock reconvergence pessimism + 0.03 1.33 library hold time + 1.33 data required time +----------------------------------------------------------------------------- + 1.33 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.35 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.05 0.00 1.13 ^ hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.54 1.68 ^ hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.09 0.00 1.68 ^ _116_/D (sky130_fd_sc_hd__dfbbn_2) + 1.68 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.89 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.03 1.32 library hold time + 1.32 data required time +----------------------------------------------------------------------------- + 1.32 data required time + -1.68 data arrival time +----------------------------------------------------------------------------- + 0.36 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.38 1.15 ^ _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.06 0.00 1.15 ^ hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.56 1.70 ^ hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.11 0.00 1.70 ^ _110_/D (sky130_fd_sc_hd__dfbbn_2) + 1.70 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.91 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.03 1.34 library hold time + 1.34 data required time +----------------------------------------------------------------------------- + 1.34 data required time + -1.70 data arrival time +----------------------------------------------------------------------------- + 0.36 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _112_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.38 1.15 ^ _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.06 0.00 1.15 ^ hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.11 0.56 1.71 ^ hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.11 0.00 1.71 ^ _112_/D (sky130_fd_sc_hd__dfbbn_2) + 1.71 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 0.90 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.03 0.00 0.90 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.30 clock uncertainty + 0.00 1.30 clock reconvergence pessimism + 0.03 1.33 library hold time + 1.33 data required time +----------------------------------------------------------------------------- + 1.33 data required time + -1.71 data arrival time +----------------------------------------------------------------------------- + 0.38 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.17 0.76 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.77 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.39 1.15 ^ _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.06 0.00 1.15 ^ hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.12 0.57 1.73 ^ hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.12 0.00 1.73 ^ _107_/D (sky130_fd_sc_hd__dfbbn_2) + 1.73 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.21 0.86 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 0.86 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 0.91 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.91 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.31 clock uncertainty + 0.00 1.31 clock reconvergence pessimism + 0.03 1.34 library hold time + 1.34 data required time +----------------------------------------------------------------------------- + 1.34 data required time + -1.73 data arrival time +----------------------------------------------------------------------------- + 0.39 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.59 0.59 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.59 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.17 0.76 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.05 0.00 0.76 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.37 1.13 ^ _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.05 0.00 1.13 ^ hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.13 0.57 1.70 ^ hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.13 0.00 1.70 ^ _113_/D (sky130_fd_sc_hd__dfbbn_2) + 1.70 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.65 0.65 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 0.65 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.20 0.85 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.06 0.00 0.85 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.04 0.89 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.89 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 1.29 clock uncertainty + 0.00 1.29 clock reconvergence pessimism + 0.02 1.31 library hold time + 1.31 data required time +----------------------------------------------------------------------------- + 1.31 data required time + -1.70 data arrival time +----------------------------------------------------------------------------- + 0.39 slack (MET) + + + +======================= Fastest Corner =================================== + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 ^ _068_/B (sky130_fd_sc_hd__or2_0) + 0.05 -0.26 9.75 ^ _068_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _001_ (net) + 0.05 0.00 9.75 ^ _106_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.75 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.16 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.05 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -9.75 data arrival time +----------------------------------------------------------------------------- + 9.14 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 ^ _082_/B (sky130_fd_sc_hd__or2_0) + 0.04 -0.27 9.73 ^ _082_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _015_ (net) + 0.04 0.00 9.73 ^ _113_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.73 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.14 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.05 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -9.73 data arrival time +----------------------------------------------------------------------------- + 9.14 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 ^ _092_/B (sky130_fd_sc_hd__or2_0) + 0.04 -0.27 9.73 ^ _092_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _025_ (net) + 0.04 0.00 9.73 ^ _118_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.73 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.14 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.05 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -9.73 data arrival time +----------------------------------------------------------------------------- + 9.14 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 ^ _070_/B (sky130_fd_sc_hd__or2_0) + 0.06 -0.25 9.75 ^ _070_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _003_ (net) + 0.06 0.00 9.76 ^ _107_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.76 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.16 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.05 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -9.76 data arrival time +----------------------------------------------------------------------------- + 9.15 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 ^ _090_/B (sky130_fd_sc_hd__or2_0) + 0.05 -0.25 9.75 ^ _090_/X (sky130_fd_sc_hd__or2_0) + 1 0.00 _023_ (net) + 0.05 0.00 9.75 ^ _117_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.75 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.14 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -9.75 data arrival time +----------------------------------------------------------------------------- + 9.16 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 ^ _084_/B (sky130_fd_sc_hd__or2_0) + 0.09 -0.22 9.78 ^ _084_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _017_ (net) + 0.09 0.00 9.78 ^ _114_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.78 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 0.16 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.04 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -9.78 data arrival time +----------------------------------------------------------------------------- + 9.17 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 ^ _074_/B (sky130_fd_sc_hd__or2_0) + 0.08 -0.23 9.77 ^ _074_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _007_ (net) + 0.08 0.00 9.77 ^ _109_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.77 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.15 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.15 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -9.77 data arrival time +----------------------------------------------------------------------------- + 9.18 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 ^ _078_/B (sky130_fd_sc_hd__or2_0) + 0.08 -0.23 9.77 ^ _078_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _011_ (net) + 0.08 0.00 9.77 ^ _111_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.77 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 0.15 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -9.77 data arrival time +----------------------------------------------------------------------------- + 9.18 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 ^ _088_/B (sky130_fd_sc_hd__or2_0) + 0.07 -0.23 9.77 ^ _088_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _021_ (net) + 0.07 0.00 9.77 ^ _116_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.77 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.14 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -9.77 data arrival time +----------------------------------------------------------------------------- + 9.18 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 ^ _076_/B (sky130_fd_sc_hd__or2_0) + 0.09 -0.21 9.79 ^ _076_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _009_ (net) + 0.09 0.00 9.79 ^ _110_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.79 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.16 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.04 0.60 library removal time + 0.60 data required time +----------------------------------------------------------------------------- + 0.60 data required time + -9.79 data arrival time +----------------------------------------------------------------------------- + 9.18 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 ^ _080_/B (sky130_fd_sc_hd__or2_0) + 0.09 -0.22 9.78 ^ _080_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _013_ (net) + 0.09 0.00 9.78 ^ _112_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.78 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.15 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.02 0.00 0.15 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.04 0.60 library removal time + 0.60 data required time +----------------------------------------------------------------------------- + 0.60 data required time + -9.78 data arrival time +----------------------------------------------------------------------------- + 9.18 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 ^ _086_/B (sky130_fd_sc_hd__or2_0) + 0.11 -0.20 9.80 ^ _086_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _019_ (net) + 0.11 0.00 9.80 ^ _115_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.80 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.16 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 0.16 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.04 0.60 library removal time + 0.60 data required time +----------------------------------------------------------------------------- + 0.60 data required time + -9.80 data arrival time +----------------------------------------------------------------------------- + 9.20 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 ^ _072_/B (sky130_fd_sc_hd__or2_0) + 0.11 -0.20 9.80 ^ _072_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _005_ (net) + 0.11 0.00 9.80 ^ _108_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 9.80 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 0.15 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -9.80 data arrival time +----------------------------------------------------------------------------- + 9.21 slack (MET) + + +Startpoint: gpio_defaults[10] (input port clocked by serial_clock) +Endpoint: _113_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[10] (in) + 4 0.02 gpio_defaults[10] (net) + 5.00 0.00 10.00 v _083_/B (sky130_fd_sc_hd__nand2b_2) + 0.03 0.95 10.95 ^ _083_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.00 _016_ (net) + 0.03 0.00 10.95 ^ _113_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.95 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.14 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -10.95 data arrival time +----------------------------------------------------------------------------- + 10.36 slack (MET) + + +Startpoint: gpio_defaults[2] (input port clocked by serial_clock) +Endpoint: _107_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[2] (in) + 4 0.02 gpio_defaults[2] (net) + 5.00 0.00 10.00 v _071_/B (sky130_fd_sc_hd__nand2b_2) + 0.04 0.97 10.97 ^ _071_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _004_ (net) + 0.04 0.00 10.97 ^ _107_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.97 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.16 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.05 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -10.97 data arrival time +----------------------------------------------------------------------------- + 10.36 slack (MET) + + +Startpoint: gpio_defaults[9] (input port clocked by serial_clock) +Endpoint: _109_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[9] (in) + 4 0.03 gpio_defaults[9] (net) + 5.00 0.00 10.00 v _075_/B (sky130_fd_sc_hd__nand2b_2) + 0.03 0.96 10.96 ^ _075_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _008_ (net) + 0.03 0.00 10.96 ^ _109_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.96 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.15 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.15 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -10.96 data arrival time +----------------------------------------------------------------------------- + 10.37 slack (MET) + + +Startpoint: gpio_defaults[7] (input port clocked by serial_clock) +Endpoint: _118_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[7] (in) + 4 0.02 gpio_defaults[7] (net) + 5.00 0.00 10.00 v _093_/B (sky130_fd_sc_hd__nand2b_2) + 0.03 0.96 10.96 ^ _093_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _026_ (net) + 0.03 0.00 10.96 ^ _118_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.96 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.14 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -10.96 data arrival time +----------------------------------------------------------------------------- + 10.38 slack (MET) + + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 v _073_/B (sky130_fd_sc_hd__nand2b_2) + 0.04 0.98 10.98 ^ _073_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _006_ (net) + 0.04 0.00 10.98 ^ _108_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.98 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 0.15 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.05 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -10.98 data arrival time +----------------------------------------------------------------------------- + 10.39 slack (MET) + + +Startpoint: gpio_defaults[6] (input port clocked by serial_clock) +Endpoint: _117_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[6] (in) + 4 0.02 gpio_defaults[6] (net) + 5.00 0.00 10.00 v _091_/B (sky130_fd_sc_hd__nand2b_2) + 0.04 0.97 10.97 ^ _091_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _024_ (net) + 0.04 0.00 10.97 ^ _117_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 10.97 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.14 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -10.97 data arrival time +----------------------------------------------------------------------------- + 10.39 slack (MET) + + +Startpoint: gpio_defaults[1] (input port clocked by serial_clock) +Endpoint: _112_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[1] (in) + 4 0.04 gpio_defaults[1] (net) + 5.00 0.00 10.00 v _081_/B (sky130_fd_sc_hd__nand2b_2) + 0.04 1.00 11.00 ^ _081_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _014_ (net) + 0.04 0.00 11.00 ^ _112_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.00 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.15 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.02 0.00 0.15 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.04 0.60 library removal time + 0.60 data required time +----------------------------------------------------------------------------- + 0.60 data required time + -11.00 data arrival time +----------------------------------------------------------------------------- + 10.40 slack (MET) + + +Startpoint: gpio_defaults[0] (input port clocked by serial_clock) +Endpoint: _106_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[0] (in) + 4 0.03 gpio_defaults[0] (net) + 5.00 0.00 10.00 v _069_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.02 11.02 ^ _069_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _002_ (net) + 0.05 0.00 11.02 ^ _106_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.02 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.16 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.05 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -11.02 data arrival time +----------------------------------------------------------------------------- + 10.41 slack (MET) + + +Startpoint: gpio_defaults[3] (input port clocked by serial_clock) +Endpoint: _110_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[3] (in) + 4 0.02 gpio_defaults[3] (net) + 5.00 0.00 10.00 v _077_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.02 11.02 ^ _077_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _010_ (net) + 0.05 0.00 11.02 ^ _110_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.02 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.16 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.05 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -11.02 data arrival time +----------------------------------------------------------------------------- + 10.41 slack (MET) + + +Startpoint: gpio_defaults[11] (input port clocked by serial_clock) +Endpoint: _114_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[11] (in) + 4 0.02 gpio_defaults[11] (net) + 5.00 0.00 10.00 v _085_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.03 11.03 ^ _085_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _018_ (net) + 0.05 0.00 11.03 ^ _114_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.03 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 0.16 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.05 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -11.03 data arrival time +----------------------------------------------------------------------------- + 10.42 slack (MET) + + +Startpoint: gpio_defaults[5] (input port clocked by serial_clock) +Endpoint: _116_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[5] (in) + 4 0.02 gpio_defaults[5] (net) + 5.00 0.00 10.00 v _089_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.02 11.02 ^ _089_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _022_ (net) + 0.05 0.00 11.02 ^ _116_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.02 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.14 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -11.02 data arrival time +----------------------------------------------------------------------------- + 10.43 slack (MET) + + +Startpoint: gpio_defaults[4] (input port clocked by serial_clock) +Endpoint: _111_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[4] (in) + 4 0.03 gpio_defaults[4] (net) + 5.00 0.00 10.00 v _079_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.03 11.03 ^ _079_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _012_ (net) + 0.05 0.00 11.03 ^ _111_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.03 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 0.15 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.04 0.59 library removal time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -11.03 data arrival time +----------------------------------------------------------------------------- + 10.44 slack (MET) + + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (removal check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.05 1.05 11.05 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.05 0.00 11.05 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.05 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.16 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 0.16 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.05 0.61 library removal time + 0.61 data required time +----------------------------------------------------------------------------- + 0.61 data required time + -11.05 data arrival time +----------------------------------------------------------------------------- + 10.45 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.33 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.03 0.00 0.33 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.06 0.00 0.71 ^ _124_/D (sky130_fd_sc_hd__dfrtp_4) + 0.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + 0.00 0.52 clock reconvergence pessimism + -0.02 0.50 library hold time + 0.50 data required time +----------------------------------------------------------------------------- + 0.50 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.21 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.03 0.00 0.34 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.37 0.70 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.05 0.00 0.71 ^ _131_/D (sky130_fd_sc_hd__dfrtp_4) + 0.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + 0.00 0.52 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.21 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.03 0.00 0.34 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.06 0.00 0.71 ^ _128_/D (sky130_fd_sc_hd__dfrtp_4) + 0.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + 0.00 0.52 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.22 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.33 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.03 0.00 0.33 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.39 0.72 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.08 0.00 0.72 ^ _120_/D (sky130_fd_sc_hd__dfrtp_4) + 0.72 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + 0.00 0.52 clock reconvergence pessimism + -0.02 0.50 library hold time + 0.50 data required time +----------------------------------------------------------------------------- + 0.50 data required time + -0.72 data arrival time +----------------------------------------------------------------------------- + 0.22 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.03 0.00 0.34 ^ hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.06 0.00 0.71 ^ _127_/D (sky130_fd_sc_hd__dfrtp_4) + 0.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + -0.01 0.51 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.22 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.03 0.00 0.34 ^ hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.06 0.00 0.71 ^ _126_/D (sky130_fd_sc_hd__dfrtp_4) + 0.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + -0.01 0.51 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.22 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.03 0.00 0.34 ^ hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.38 0.72 ^ hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.07 0.00 0.72 ^ _125_/D (sky130_fd_sc_hd__dfrtp_4) + 0.72 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + -0.01 0.51 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.72 data arrival time +----------------------------------------------------------------------------- + 0.23 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.33 ^ _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.03 0.00 0.33 ^ hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.38 0.72 ^ hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.08 0.00 0.72 ^ _129_/D (sky130_fd_sc_hd__dfrtp_4) + 0.72 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + -0.01 0.51 clock reconvergence pessimism + -0.02 0.48 library hold time + 0.48 data required time +----------------------------------------------------------------------------- + 0.48 data required time + -0.72 data arrival time +----------------------------------------------------------------------------- + 0.24 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.03 0.00 0.34 ^ hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.10 0.40 0.73 ^ hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.10 0.00 0.73 ^ _130_/D (sky130_fd_sc_hd__dfrtp_4) + 0.73 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + 0.00 0.52 clock reconvergence pessimism + -0.02 0.50 library hold time + 0.50 data required time +----------------------------------------------------------------------------- + 0.50 data required time + -0.73 data arrival time +----------------------------------------------------------------------------- + 0.24 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 0.35 ^ _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.04 0.00 0.35 ^ hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.39 0.74 ^ hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.08 0.00 0.74 ^ _123_/D (sky130_fd_sc_hd__dfrtp_4) + 0.74 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + 0.00 0.52 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.74 data arrival time +----------------------------------------------------------------------------- + 0.24 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 0.35 ^ _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.04 0.00 0.35 ^ hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.39 0.74 ^ hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.09 0.00 0.74 ^ _121_/D (sky130_fd_sc_hd__dfrtp_4) + 0.74 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + -0.01 0.51 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.74 data arrival time +----------------------------------------------------------------------------- + 0.26 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 0.35 ^ _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.04 0.00 0.35 ^ hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.40 0.75 ^ hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.09 0.00 0.75 ^ _122_/D (sky130_fd_sc_hd__dfrtp_4) + 0.75 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + -0.01 0.51 clock reconvergence pessimism + -0.02 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -0.75 data arrival time +----------------------------------------------------------------------------- + 0.27 slack (MET) + + +Startpoint: serial_data_in (input port clocked by serial_clock) +Endpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ serial_data_in (in) + 2 0.01 serial_data_in (net) + 5.00 0.00 10.00 ^ input5/A (sky130_fd_sc_hd__buf_2) + 0.14 0.00 10.00 ^ input5/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net5 (net) + 0.14 0.00 10.00 ^ _119_/D (sky130_fd_sc_hd__dfrtp_4) + 10.00 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.12 0.12 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.12 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.40 0.52 clock uncertainty + 0.00 0.52 clock reconvergence pessimism + -0.03 0.49 library hold time + 0.49 data required time +----------------------------------------------------------------------------- + 0.49 data required time + -10.00 data arrival time +----------------------------------------------------------------------------- + 9.51 slack (MET) + + +Startpoint: serial_clock (clock source 'serial_clock') +Endpoint: serial_clock_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ serial_clock_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.21 0.20 0.30 ^ serial_clock_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_clock_out (net) + 0.21 0.01 0.32 ^ serial_clock_out (out) + 0.32 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.32 data arrival time +----------------------------------------------------------------------------- + 9.92 slack (MET) + + +Startpoint: serial_load (clock source 'serial_load') +Endpoint: serial_load_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 0.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.12 ^ serial_load_out_buffer/A (sky130_fd_sc_hd__clkbuf_16) + 0.21 0.19 0.31 ^ serial_load_out_buffer/X (sky130_fd_sc_hd__clkbuf_16) + 1 0.25 serial_load_out (net) + 0.22 0.03 0.34 ^ serial_load_out (out) + 0.34 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.34 data arrival time +----------------------------------------------------------------------------- + 9.94 slack (MET) + + +Startpoint: resetn (input port) +Endpoint: resetn_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 ^ input external delay + 5.00 0.00 0.00 ^ resetn (in) + 2 0.01 resetn (net) + 5.00 0.00 0.00 ^ input4/A (sky130_fd_sc_hd__buf_2) + 0.12 -0.05 -0.05 ^ input4/X (sky130_fd_sc_hd__buf_2) + 1 0.01 net4 (net) + 0.12 0.00 -0.05 ^ fanout31/A (sky130_fd_sc_hd__buf_2) + 0.09 0.12 0.08 ^ fanout31/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net31 (net) + 0.09 0.00 0.08 ^ fanout30/A (sky130_fd_sc_hd__buf_2) + 0.12 0.14 0.21 ^ fanout30/X (sky130_fd_sc_hd__buf_2) + 8 0.03 net30 (net) + 0.12 0.00 0.21 ^ fanout29/A (sky130_fd_sc_hd__buf_2) + 0.08 0.12 0.33 ^ fanout29/X (sky130_fd_sc_hd__buf_2) + 3 0.02 net29 (net) + 0.08 0.00 0.33 ^ _134_/A (sky130_fd_sc_hd__buf_2) + 0.08 0.11 0.44 ^ _134_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net20 (net) + 0.08 0.00 0.44 ^ output20/A (sky130_fd_sc_hd__buf_16) + 0.22 0.19 0.63 ^ output20/X (sky130_fd_sc_hd__buf_16) + 1 0.25 resetn_out (net) + 0.22 0.01 0.64 ^ resetn_out (out) + 0.64 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.64 data arrival time +----------------------------------------------------------------------------- + 10.24 slack (MET) + + +Startpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 0.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.11 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.13 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.13 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.37 0.50 v _117_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net9 (net) + 0.04 0.00 0.50 v output9/A (sky130_fd_sc_hd__buf_16) + 0.11 0.14 0.64 v output9/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_sel (net) + 0.12 0.02 0.66 v pad_gpio_ana_sel (out) + 0.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.66 data arrival time +----------------------------------------------------------------------------- + 10.26 slack (MET) + + +Startpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_pol (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 0.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.11 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.13 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.13 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.37 0.50 v _118_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net8 (net) + 0.04 0.00 0.50 v output8/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.65 v output8/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_pol (net) + 0.11 0.01 0.66 v pad_gpio_ana_pol (out) + 0.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.66 data arrival time +----------------------------------------------------------------------------- + 10.26 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[0] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 0.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.11 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.13 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.13 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.37 0.50 v _113_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net10 (net) + 0.04 0.00 0.51 v output10/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.66 v output10/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[0] (net) + 0.11 0.01 0.66 v pad_gpio_dm[0] (out) + 0.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.66 data arrival time +----------------------------------------------------------------------------- + 10.26 slack (MET) + + +Startpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_slow_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 0.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.11 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.13 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 0.13 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.37 0.51 v _108_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net18 (net) + 0.04 0.00 0.51 v output18/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.65 v output18/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_slow_sel (net) + 0.11 0.01 0.66 v pad_gpio_slow_sel (out) + 0.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.66 data arrival time +----------------------------------------------------------------------------- + 10.26 slack (MET) + + +Startpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ib_mode_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 0.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.11 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.13 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 0.13 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.37 0.50 v _111_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net14 (net) + 0.04 0.00 0.51 v output14/A (sky130_fd_sc_hd__buf_16) + 0.11 0.14 0.65 v output14/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ib_mode_sel (net) + 0.12 0.01 0.66 v pad_gpio_ib_mode_sel (out) + 0.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.66 data arrival time +----------------------------------------------------------------------------- + 10.26 slack (MET) + + +Startpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_ana_en (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 0.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.11 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.13 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.13 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.37 0.50 v _116_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net7 (net) + 0.04 0.00 0.51 v output7/A (sky130_fd_sc_hd__buf_16) + 0.11 0.14 0.65 v output7/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_ana_en (net) + 0.12 0.01 0.66 v pad_gpio_ana_en (out) + 0.66 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.66 data arrival time +----------------------------------------------------------------------------- + 10.26 slack (MET) + + +Startpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_vtrip_sel (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 0.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.12 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.14 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.37 0.51 v _109_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net19 (net) + 0.04 0.00 0.51 v output19/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.66 v output19/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_vtrip_sel (net) + 0.11 0.01 0.67 v pad_gpio_vtrip_sel (out) + 0.67 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.67 data arrival time +----------------------------------------------------------------------------- + 10.27 slack (MET) + + +Startpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_inenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 0.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.12 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.14 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.14 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.38 0.52 v _110_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net15 (net) + 0.04 0.00 0.52 v output15/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.67 v output15/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_inenb (net) + 0.11 0.01 0.68 v pad_gpio_inenb (out) + 0.68 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.68 data arrival time +----------------------------------------------------------------------------- + 10.28 slack (MET) + + +Startpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_holdover (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 0.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.12 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.14 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.14 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.38 0.52 v _107_/Q (sky130_fd_sc_hd__dfbbn_2) + 1 0.02 net13 (net) + 0.04 0.00 0.52 v output13/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.67 v output13/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_holdover (net) + 0.12 0.01 0.68 v pad_gpio_holdover (out) + 0.68 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.68 data arrival time +----------------------------------------------------------------------------- + 10.28 slack (MET) + + +Startpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[2] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 0.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.12 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.14 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 0.14 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.05 0.38 0.52 v _115_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net12 (net) + 0.05 0.00 0.53 v output12/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.67 v output12/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[2] (net) + 0.12 0.02 0.69 v pad_gpio_dm[2] (out) + 0.69 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.69 data arrival time +----------------------------------------------------------------------------- + 10.29 slack (MET) + + +Startpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_dm[1] (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 0.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.12 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.15 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 0.15 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.05 0.38 0.53 v _114_/Q (sky130_fd_sc_hd__dfbbn_2) + 2 0.02 net11 (net) + 0.05 0.00 0.53 v output11/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 0.68 v output11/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_dm[1] (net) + 0.11 0.01 0.69 v pad_gpio_dm[1] (out) + 0.69 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.69 data arrival time +----------------------------------------------------------------------------- + 10.29 slack (MET) + + +Startpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.12 0.11 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.11 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.13 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.13 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.04 0.24 0.37 v _113_/Q_N (sky130_fd_sc_hd__dfbbn_2) + 1 0.00 _000_ (net) + 0.04 0.00 0.37 v _064_/A_N (sky130_fd_sc_hd__and2b_2) + 0.05 0.14 0.51 ^ _064_/X (sky130_fd_sc_hd__and2b_2) + 1 0.01 _044_ (net) + 0.05 0.00 0.51 ^ _066_/A1 (sky130_fd_sc_hd__o21ai_4) + 0.03 0.04 0.56 v _066_/Y (sky130_fd_sc_hd__o21ai_4) + 1 0.01 net16 (net) + 0.03 0.00 0.56 v output16/A (sky130_fd_sc_hd__buf_16) + 0.11 0.14 0.70 v output16/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_out (net) + 0.11 0.01 0.71 v pad_gpio_out (out) + 0.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 10.31 slack (MET) + + +Startpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Endpoint: pad_gpio_outenb (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 0.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.12 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.14 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.14 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.07 0.35 0.50 ^ _106_/Q (sky130_fd_sc_hd__dfbbn_2) + 3 0.02 mgmt_ena (net) + 0.07 0.00 0.50 ^ _061_/S (sky130_fd_sc_hd__mux2_4) + 0.05 0.11 0.61 ^ _061_/X (sky130_fd_sc_hd__mux2_4) + 1 0.02 net17 (net) + 0.05 0.00 0.61 ^ output17/A (sky130_fd_sc_hd__buf_16) + 0.21 0.18 0.79 ^ output17/X (sky130_fd_sc_hd__buf_16) + 1 0.25 pad_gpio_outenb (net) + 0.22 0.02 0.81 ^ pad_gpio_outenb (out) + 0.81 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -0.81 data arrival time +----------------------------------------------------------------------------- + 10.41 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: mgmt_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 ^ input3/A (sky130_fd_sc_hd__buf_2) + 0.11 -0.05 9.95 ^ input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.11 0.00 9.95 ^ _133_/A (sky130_fd_sc_hd__buf_2) + 0.07 0.11 10.06 ^ _133_/X (sky130_fd_sc_hd__buf_2) + 1 0.02 net6 (net) + 0.07 0.00 10.06 ^ output6/A (sky130_fd_sc_hd__buf_16) + 0.21 0.19 10.25 ^ output6/X (sky130_fd_sc_hd__buf_16) + 1 0.25 mgmt_gpio_in (net) + 0.21 0.01 10.25 ^ mgmt_gpio_in (out) + 10.25 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -10.25 data arrival time +----------------------------------------------------------------------------- + 19.85 slack (MET) + + +Startpoint: pad_gpio_in (input port clocked by serial_clock) +Endpoint: user_gpio_in (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ pad_gpio_in (in) + 2 0.01 pad_gpio_in (net) + 5.00 0.00 10.00 ^ input3/A (sky130_fd_sc_hd__buf_2) + 0.11 -0.05 9.95 ^ input3/X (sky130_fd_sc_hd__buf_2) + 2 0.00 net3 (net) + 0.11 0.00 9.95 ^ _067_/B (sky130_fd_sc_hd__and2_2) + 0.12 0.16 10.10 ^ _067_/X (sky130_fd_sc_hd__and2_2) + 1 0.03 net22 (net) + 0.12 0.00 10.11 ^ output22/A (sky130_fd_sc_hd__buf_16) + 0.22 0.20 10.30 ^ output22/X (sky130_fd_sc_hd__buf_16) + 1 0.25 user_gpio_in (net) + 0.22 0.01 10.31 ^ user_gpio_in (out) + 10.31 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -10.31 data arrival time +----------------------------------------------------------------------------- + 19.91 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 50.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 50.11 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 50.35 ^ _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.04 0.00 50.35 ^ _132_/D (sky130_fd_sc_hd__dfrtp_2) + 50.35 data arrival time + + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 1.22 26.22 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 26.22 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.03 0.16 26.38 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.03 0.00 26.38 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 26.43 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.04 0.00 26.43 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.40 26.83 clock uncertainty + 0.00 26.83 clock reconvergence pessimism + -0.02 26.81 library hold time + 26.81 data required time +----------------------------------------------------------------------------- + 26.81 data required time + -50.35 data arrival time +----------------------------------------------------------------------------- + 23.54 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 1.10 26.10 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 26.10 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.03 0.14 26.25 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.03 0.00 26.25 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.04 0.04 26.29 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.04 0.00 26.29 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.05 0.26 26.55 v _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.05 0.00 26.55 v output21/A (sky130_fd_sc_hd__buf_16) + 0.11 0.15 26.70 v output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.11 0.01 26.71 v serial_data_out (out) + 26.71 data arrival time + + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 0.40 0.40 clock uncertainty + 0.00 0.40 clock reconvergence pessimism + -10.00 -9.60 output external delay + -9.60 data required time +----------------------------------------------------------------------------- + -9.60 data required time + -26.71 data arrival time +----------------------------------------------------------------------------- + 36.31 slack (MET) + + +Startpoint: _130_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _114_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _130_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _130_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[11] (net) + 0.03 0.00 0.34 ^ hold4/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.05 0.37 0.70 ^ hold4/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net49 (net) + 0.05 0.00 0.70 ^ _114_/D (sky130_fd_sc_hd__dfbbn_2) + 0.70 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _101__9/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _101__9/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net40 (net) + 0.03 0.00 0.16 v _114_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.03 0.60 library hold time + 0.60 data required time +----------------------------------------------------------------------------- + 0.60 data required time + -0.70 data arrival time +----------------------------------------------------------------------------- + 0.11 slack (MET) + + +Startpoint: _131_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _115_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _131_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 0.35 ^ _131_/Q (sky130_fd_sc_hd__dfrtp_4) + 2 0.01 shift_register[12] (net) + 0.04 0.00 0.35 ^ hold3/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.04 0.35 0.70 ^ hold3/X (sky130_fd_sc_hd__dlygate4sd3_1) + 1 0.00 net48 (net) + 0.04 0.00 0.70 ^ _115_/D (sky130_fd_sc_hd__dfbbn_2) + 0.70 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.16 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 0.16 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.04 0.60 library hold time + 0.60 data required time +----------------------------------------------------------------------------- + 0.60 data required time + -0.70 data arrival time +----------------------------------------------------------------------------- + 0.11 slack (MET) + + +Startpoint: _119_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _106_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _119_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.33 ^ _119_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[0] (net) + 0.03 0.00 0.33 ^ hold1/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.39 0.72 ^ hold1/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net46 (net) + 0.08 0.00 0.72 ^ _106_/D (sky130_fd_sc_hd__dfbbn_2) + 0.72 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _058__1/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _058__1/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net32 (net) + 0.03 0.00 0.16 v _106_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.03 0.59 library hold time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -0.72 data arrival time +----------------------------------------------------------------------------- + 0.13 slack (MET) + + +Startpoint: _123_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _111_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _123_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.33 ^ _123_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[4] (net) + 0.03 0.00 0.33 ^ hold8/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold8/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net53 (net) + 0.06 0.00 0.71 ^ _111_/D (sky130_fd_sc_hd__dfbbn_2) + 0.71 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _098__6/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _098__6/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net37 (net) + 0.02 0.00 0.15 v _111_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.03 0.58 library hold time + 0.58 data required time +----------------------------------------------------------------------------- + 0.58 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.13 slack (MET) + + +Startpoint: _127_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _108_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _127_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _127_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[8] (net) + 0.03 0.00 0.34 ^ hold10/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold10/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net55 (net) + 0.06 0.00 0.71 ^ _108_/D (sky130_fd_sc_hd__dfbbn_2) + 0.71 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 0.15 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.02 0.00 0.15 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.03 0.58 library hold time + 0.58 data required time +----------------------------------------------------------------------------- + 0.58 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.13 slack (MET) + + +Startpoint: _126_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _118_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _126_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _126_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[7] (net) + 0.03 0.00 0.34 ^ hold11/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold11/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net56 (net) + 0.06 0.00 0.71 ^ _118_/D (sky130_fd_sc_hd__dfbbn_2) + 0.71 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _105__13/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _105__13/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net44 (net) + 0.02 0.00 0.14 v _118_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.03 0.57 library hold time + 0.57 data required time +----------------------------------------------------------------------------- + 0.57 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.14 slack (MET) + + +Startpoint: _128_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _109_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _128_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.33 ^ _128_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[9] (net) + 0.03 0.00 0.33 ^ hold2/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.38 0.72 ^ hold2/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net47 (net) + 0.08 0.00 0.72 ^ _109_/D (sky130_fd_sc_hd__dfbbn_2) + 0.72 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _096__4/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.15 v _096__4/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net35 (net) + 0.02 0.00 0.15 v _109_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.03 0.58 library hold time + 0.58 data required time +----------------------------------------------------------------------------- + 0.58 data required time + -0.72 data arrival time +----------------------------------------------------------------------------- + 0.14 slack (MET) + + +Startpoint: _125_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _117_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _125_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _125_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[6] (net) + 0.03 0.00 0.34 ^ hold12/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.37 0.71 ^ hold12/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net57 (net) + 0.06 0.00 0.71 ^ _117_/D (sky130_fd_sc_hd__dfbbn_2) + 0.71 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _104__12/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _104__12/Y (sky130_fd_sc_hd__inv_2) + 1 0.00 net43 (net) + 0.02 0.00 0.14 v _117_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.03 0.57 library hold time + 0.57 data required time +----------------------------------------------------------------------------- + 0.57 data required time + -0.71 data arrival time +----------------------------------------------------------------------------- + 0.14 slack (MET) + + +Startpoint: _124_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _116_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _124_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _124_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[5] (net) + 0.03 0.00 0.34 ^ hold13/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.07 0.38 0.72 ^ hold13/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net58 (net) + 0.07 0.00 0.72 ^ _116_/D (sky130_fd_sc_hd__dfbbn_2) + 0.72 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _103__11/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _103__11/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net42 (net) + 0.02 0.00 0.14 v _116_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.03 0.57 library hold time + 0.57 data required time +----------------------------------------------------------------------------- + 0.57 data required time + -0.72 data arrival time +----------------------------------------------------------------------------- + 0.14 slack (MET) + + +Startpoint: _122_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _110_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _122_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 0.35 ^ _122_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[3] (net) + 0.04 0.00 0.35 ^ hold7/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.08 0.39 0.74 ^ hold7/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net52 (net) + 0.08 0.00 0.74 ^ _110_/D (sky130_fd_sc_hd__dfbbn_2) + 0.74 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _097__5/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _097__5/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net36 (net) + 0.03 0.00 0.16 v _110_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.03 0.59 library hold time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -0.74 data arrival time +----------------------------------------------------------------------------- + 0.14 slack (MET) + + +Startpoint: _120_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _112_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _120_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 0.35 ^ _120_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[1] (net) + 0.04 0.00 0.35 ^ hold6/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.39 0.74 ^ hold6/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net51 (net) + 0.09 0.00 0.74 ^ _112_/D (sky130_fd_sc_hd__dfbbn_2) + 0.74 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _099__7/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.15 v _099__7/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net38 (net) + 0.02 0.00 0.15 v _112_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.55 clock uncertainty + 0.00 0.55 clock reconvergence pessimism + 0.03 0.58 library hold time + 0.58 data required time +----------------------------------------------------------------------------- + 0.58 data required time + -0.74 data arrival time +----------------------------------------------------------------------------- + 0.16 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.11 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.11 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.04 0.24 0.35 ^ _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.04 0.00 0.35 ^ hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.40 0.75 ^ hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.09 0.00 0.75 ^ _107_/D (sky130_fd_sc_hd__dfbbn_2) + 0.75 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.14 0.13 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 0.13 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 0.16 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 0.16 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.56 clock uncertainty + 0.00 0.56 clock reconvergence pessimism + 0.03 0.59 library hold time + 0.59 data required time +----------------------------------------------------------------------------- + 0.59 data required time + -0.75 data arrival time +----------------------------------------------------------------------------- + 0.16 slack (MET) + + +Startpoint: _129_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _113_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: min +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_1__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.11 0.10 ^ clkbuf_1_1__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.03 serial_clock_out_buffered (net) + 0.04 0.00 0.11 ^ _129_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.03 0.23 0.34 ^ _129_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.00 shift_register[10] (net) + 0.03 0.00 0.34 ^ hold9/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.10 0.40 0.73 ^ hold9/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net54 (net) + 0.10 0.00 0.73 ^ _113_/D (sky130_fd_sc_hd__dfbbn_2) + 0.73 data arrival time + + 0.00 0.00 clock serial_load' (fall edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.05 0.13 0.12 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.05 0.00 0.12 ^ _100__8/A (sky130_fd_sc_hd__inv_2) + 0.02 0.02 0.14 v _100__8/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net39 (net) + 0.02 0.00 0.14 v _113_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + 0.40 0.54 clock uncertainty + 0.00 0.54 clock reconvergence pessimism + 0.03 0.57 library hold time + 0.57 data required time +----------------------------------------------------------------------------- + 0.57 data required time + -0.73 data arrival time +----------------------------------------------------------------------------- + 0.16 slack (MET) + + diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.power.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.power.rpt new file mode 100644 index 00000000..f85b98f5 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.power.rpt @@ -0,0 +1,45 @@ + +=========================================================================== + report_power +============================================================================ + + +======================= Slowest Corner ================================= + +Group Internal Switching Leakage Total + Power Power Power Power (Watts) +---------------------------------------------------------------- +Sequential 1.96e-05 8.16e-07 4.03e-07 2.08e-05 19.8% +Combinational 2.99e-05 5.39e-05 9.49e-07 8.47e-05 80.2% +Macro 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +Pad 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +---------------------------------------------------------------- +Total 4.95e-05 5.47e-05 1.35e-06 1.06e-04 100.0% + 46.9% 51.8% 1.3% + +======================= Typical Corner =================================== + +Group Internal Switching Leakage Total + Power Power Power Power (Watts) +---------------------------------------------------------------- +Sequential 2.58e-05 1.05e-06 2.17e-10 2.68e-05 20.0% +Combinational 3.88e-05 6.84e-05 3.83e-09 1.07e-04 80.0% +Macro 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +Pad 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +---------------------------------------------------------------- +Total 6.46e-05 6.95e-05 4.05e-09 1.34e-04 100.0% + 48.2% 51.8% 0.0% + + +======================= Fastest Corner ================================= + +Group Internal Switching Leakage Total + Power Power Power Power (Watts) +---------------------------------------------------------------- +Sequential 2.99e-05 1.25e-06 5.32e-10 3.11e-05 18.8% +Combinational 5.36e-05 8.05e-05 5.86e-09 1.34e-04 81.2% +Macro 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +Pad 0.00e+00 0.00e+00 0.00e+00 0.00e+00 0.0% +---------------------------------------------------------------- +Total 8.35e-05 8.18e-05 6.39e-09 1.65e-04 100.0% + 50.5% 49.5% 0.0% diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.rpt new file mode 100644 index 00000000..98943234 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.rpt @@ -0,0 +1,446 @@ + +=========================================================================== +report_checks -unconstrained +============================================================================ + +======================= Slowest Corner =================================== + +Startpoint: gpio_defaults[8] (input port clocked by serial_clock) +Endpoint: _108_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 ^ input external delay + 5.00 0.00 10.00 ^ gpio_defaults[8] (in) + 4 0.02 gpio_defaults[8] (net) + 5.00 0.00 10.00 ^ _072_/B (sky130_fd_sc_hd__or2_0) + 0.29 1.06 11.06 ^ _072_/X (sky130_fd_sc_hd__or2_0) + 1 0.01 _005_ (net) + 0.29 0.00 11.07 ^ _108_/RESET_B (sky130_fd_sc_hd__dfbbn_2) + 11.07 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_0__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.10 0.29 51.47 ^ clkbuf_1_0__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 6 0.04 clknet_1_0__leaf_serial_load (net) + 0.10 0.00 51.47 ^ _095__3/A (sky130_fd_sc_hd__inv_2) + 0.04 0.08 51.55 v _095__3/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net34 (net) + 0.04 0.00 51.55 v _108_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.15 clock uncertainty + 0.00 51.15 clock reconvergence pessimism + -0.18 50.96 library recovery time + 50.96 data required time +----------------------------------------------------------------------------- + 50.96 data required time + -11.07 data arrival time +----------------------------------------------------------------------------- + 39.90 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 1.68 26.68 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 26.68 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.07 0.34 27.01 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.07 0.00 27.02 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.09 0.11 27.13 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.09 0.00 27.13 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.13 0.93 28.05 v _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.13 0.00 28.05 v output21/A (sky130_fd_sc_hd__buf_16) + 0.22 0.42 28.48 v output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.22 0.01 28.48 v serial_data_out (out) + 28.48 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -28.48 data arrival time +----------------------------------------------------------------------------- + 11.12 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ss + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.31 1.31 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.18 0.00 1.31 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.09 0.31 1.62 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.09 0.00 1.62 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.12 1.05 2.67 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.12 0.00 2.67 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.18 1.31 3.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.18 0.00 3.98 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 3.98 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.18 1.18 51.18 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.18 0.00 51.18 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.12 0.30 51.49 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.12 0.00 51.49 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.05 0.09 51.58 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.05 0.00 51.58 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 51.18 clock uncertainty + 0.00 51.18 clock reconvergence pessimism + -0.41 50.77 library setup time + 50.77 data required time +----------------------------------------------------------------------------- + 50.77 data required time + -3.98 data arrival time +----------------------------------------------------------------------------- + 46.79 slack (MET) + + + +======================= Typical Corner =================================== + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.73 1.27 11.27 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.73 0.00 11.27 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.27 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.03 0.04 50.82 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.03 0.00 50.82 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.05 50.37 library recovery time + 50.37 data required time +----------------------------------------------------------------------------- + 50.37 data required time + -11.27 data arrival time +----------------------------------------------------------------------------- + 39.11 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 1.54 26.54 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.16 0.00 26.54 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.22 26.77 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.03 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 26.77 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.05 0.07 26.84 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.05 0.00 26.84 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.10 0.41 27.25 ^ _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.10 0.00 27.25 ^ output21/A (sky130_fd_sc_hd__buf_16) + 0.27 0.29 27.54 ^ output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.27 0.01 27.55 ^ serial_data_out (out) + 27.55 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -27.55 data arrival time +----------------------------------------------------------------------------- + 12.05 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: tt + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.17 0.65 0.66 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.17 0.00 0.66 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.19 0.85 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.06 0.00 0.85 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.06 0.50 1.35 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.06 0.00 1.35 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.09 0.64 1.98 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.09 0.00 1.98 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 1.98 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.16 0.59 50.59 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.16 0.00 50.59 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.08 0.19 50.78 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.08 0.00 50.78 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.05 50.82 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.82 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 50.42 clock uncertainty + 0.00 50.42 clock reconvergence pessimism + -0.17 50.25 library setup time + 50.25 data required time +----------------------------------------------------------------------------- + 50.25 data required time + -1.98 data arrival time +----------------------------------------------------------------------------- + 48.27 slack (MET) + + + +======================= Fastest Corner =================================== + +Startpoint: gpio_defaults[12] (input port clocked by serial_clock) +Endpoint: _115_ (recovery check against falling-edge clock serial_load') +Path Group: **async_default** +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock network delay (propagated) + 10.00 10.00 v input external delay + 5.00 0.00 10.00 v gpio_defaults[12] (in) + 4 0.02 gpio_defaults[12] (net) + 5.00 0.00 10.00 v _087_/B (sky130_fd_sc_hd__nand2b_2) + 0.56 1.16 11.16 ^ _087_/Y (sky130_fd_sc_hd__nand2b_2) + 1 0.01 _020_ (net) + 0.56 0.00 11.16 ^ _115_/SET_B (sky130_fd_sc_hd__dfbbn_2) + 11.16 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _102__10/A (sky130_fd_sc_hd__inv_2) + 0.02 0.03 50.14 v _102__10/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net41 (net) + 0.02 0.00 50.14 v _115_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + 0.00 49.75 library recovery time + 49.75 data required time +----------------------------------------------------------------------------- + 49.75 data required time + -11.16 data arrival time +----------------------------------------------------------------------------- + 38.58 slack (MET) + + +Startpoint: _132_ (rising edge-triggered flip-flop clocked by serial_clock') +Endpoint: serial_data_out (output port clocked by serial_clock) +Path Group: serial_clock +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 25.00 25.00 clock serial_clock' (rise edge) + 0.00 25.00 clock source latency + 5.00 0.00 25.00 v serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 25.00 v clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 1.22 26.22 v clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 26.22 v clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.03 0.16 26.38 v clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.03 0.00 26.38 v _059__14/A (sky130_fd_sc_hd__inv_2) + 0.04 0.05 26.43 ^ _059__14/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net45 (net) + 0.04 0.00 26.43 ^ _132_/CLK (sky130_fd_sc_hd__dfrtp_2) + 0.07 0.26 26.69 ^ _132_/Q (sky130_fd_sc_hd__dfrtp_2) + 1 0.02 net21 (net) + 0.07 0.00 26.69 ^ output21/A (sky130_fd_sc_hd__buf_16) + 0.21 0.21 26.90 ^ output21/X (sky130_fd_sc_hd__buf_16) + 1 0.25 serial_data_out (net) + 0.21 0.01 26.91 ^ serial_data_out (out) + 26.91 data arrival time + + 50.00 50.00 clock serial_clock (rise edge) + 0.00 50.00 clock network delay (propagated) + -0.40 49.60 clock uncertainty + 0.00 49.60 clock reconvergence pessimism + -10.00 39.60 output external delay + 39.60 data required time +----------------------------------------------------------------------------- + 39.60 data required time + -26.91 data arrival time +----------------------------------------------------------------------------- + 12.69 slack (MET) + + +Startpoint: _121_ (rising edge-triggered flip-flop clocked by serial_clock) +Endpoint: _107_ (falling edge-triggered flip-flop clocked by serial_load') +Path Group: serial_load +Path Type: max +Corner: ff + +Fanout Cap Slew Delay Time Description +----------------------------------------------------------------------------- + 0.00 0.00 clock serial_clock (rise edge) + 0.00 0.00 clock source latency + 5.00 0.00 0.00 ^ serial_clock (in) + 2 0.02 serial_clock (net) + 5.00 0.00 0.00 ^ clkbuf_0_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 -0.01 ^ clkbuf_0_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_clock (net) + 0.13 0.00 -0.01 ^ clkbuf_1_0__f_serial_clock/A (sky130_fd_sc_hd__clkbuf_16) + 0.04 0.13 0.12 ^ clkbuf_1_0__f_serial_clock/X (sky130_fd_sc_hd__clkbuf_16) + 9 0.04 clknet_1_0__leaf_serial_clock (net) + 0.04 0.00 0.12 ^ _121_/CLK (sky130_fd_sc_hd__dfrtp_4) + 0.05 0.31 0.43 v _121_/Q (sky130_fd_sc_hd__dfrtp_4) + 1 0.01 shift_register[2] (net) + 0.05 0.00 0.43 v hold5/A (sky130_fd_sc_hd__dlygate4sd3_1) + 0.06 0.42 0.86 v hold5/X (sky130_fd_sc_hd__dlygate4sd3_1) + 2 0.01 net50 (net) + 0.06 0.00 0.86 v _107_/D (sky130_fd_sc_hd__dfbbn_2) + 0.86 data arrival time + + 50.00 50.00 clock serial_load' (fall edge) + 0.00 50.00 clock source latency + 5.00 0.00 50.00 ^ serial_load (in) + 2 0.02 serial_load (net) + 5.00 0.00 50.00 ^ clkbuf_0_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.13 -0.01 49.99 ^ clkbuf_0_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 2 0.02 clknet_0_serial_load (net) + 0.13 0.00 49.99 ^ clkbuf_1_1__f_serial_load/A (sky130_fd_sc_hd__clkbuf_16) + 0.06 0.13 50.12 ^ clkbuf_1_1__f_serial_load/X (sky130_fd_sc_hd__clkbuf_16) + 8 0.06 serial_load_out_buffered (net) + 0.06 0.00 50.12 ^ _094__2/A (sky130_fd_sc_hd__inv_2) + 0.03 0.03 50.14 v _094__2/Y (sky130_fd_sc_hd__inv_2) + 1 0.01 net33 (net) + 0.03 0.00 50.14 v _107_/CLK_N (sky130_fd_sc_hd__dfbbn_2) + -0.40 49.74 clock uncertainty + 0.00 49.74 clock reconvergence pessimism + -0.10 49.65 library setup time + 49.65 data required time +----------------------------------------------------------------------------- + 49.65 data required time + -0.86 data arrival time +----------------------------------------------------------------------------- + 48.79 slack (MET) + + + +=========================================================================== +report_checks --slack_max -0.01 +============================================================================ + +======================= Slowest Corner =================================== + +No paths found. + +======================= Typical Corner =================================== + +No paths found. + +======================= Fastest Corner =================================== + +No paths found. diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.slew.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.slew.rpt new file mode 100644 index 00000000..a1233fa1 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.slew.rpt @@ -0,0 +1,334 @@ + +=========================================================================== + report_check_types -max_slew -max_cap -max_fanout -violators +============================================================================ + +======================= Slowest Corner =================================== + +max slew + +Pin Limit Slew Slack +------------------------------------------------------------ +ANTENNA__080__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__081__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_081_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__061__A0/DIODE 1.25 5.00 -3.75 (VIOLATED) +_087_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__089__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__088__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__084__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__085__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_089_/B 1.25 5.00 -3.75 (VIOLATED) +_086_/B 1.25 5.00 -3.75 (VIOLATED) +_084_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__087__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_085_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__068__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_061_/A0 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__077__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_069_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__076__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_079_/B 1.25 5.00 -3.75 (VIOLATED) +_074_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__074__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__078__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_076_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__086__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__069__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__062__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_075_/B 1.25 5.00 -3.75 (VIOLATED) +_077_/B 1.25 5.00 -3.75 (VIOLATED) +_078_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__091__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_088_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__090__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_091_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__092__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__082__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_082_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__072__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_083_/B 1.25 5.00 -3.75 (VIOLATED) +_092_/B 1.25 5.00 -3.75 (VIOLATED) +_073_/B 1.25 5.00 -3.75 (VIOLATED) +_080_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__079__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__083__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_093_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_clock_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__093__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_clock/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input2_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_071_/B 1.25 5.00 -3.75 (VIOLATED) +_090_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input3_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__075__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__073__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__070__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_068_/B 1.25 5.00 -3.75 (VIOLATED) +input3/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input5_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_070_/B 1.25 5.00 -3.75 (VIOLATED) +input2/A 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_load/A 1.25 5.00 -3.75 (VIOLATED) +input5/A 1.25 5.00 -3.75 (VIOLATED) +input4/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input4_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_062_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_load_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input1_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__071__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_072_/B 1.25 5.00 -3.75 (VIOLATED) +input1/A 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[0] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[10] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[11] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[12] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[1] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[2] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[3] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[4] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[5] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[6] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[7] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[8] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[9] 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_out 1.25 5.00 -3.75 (VIOLATED) +pad_gpio_in 1.25 5.00 -3.75 (VIOLATED) +resetn 1.25 5.00 -3.75 (VIOLATED) +serial_clock 1.25 5.00 -3.75 (VIOLATED) +serial_data_in 1.25 5.00 -3.75 (VIOLATED) +serial_load 1.25 5.00 -3.75 (VIOLATED) +user_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +user_gpio_out 1.25 5.00 -3.75 (VIOLATED) + +max fanout + +Pin Limit Fanout Slack +--------------------------------------------------------- +clkbuf_1_0__f_serial_clock/X 7 9 -2 (VIOLATED) +clkbuf_1_1__f_serial_load/X 7 8 (VIOLATED) +fanout30/X 7 8 (VIOLATED) + + +======================= Typical Corner =================================== + +max slew + +Pin Limit Slew Slack +------------------------------------------------------------ +ANTENNA__080__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__081__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_081_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__061__A0/DIODE 1.25 5.00 -3.75 (VIOLATED) +_087_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__089__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__088__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__084__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__085__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_089_/B 1.25 5.00 -3.75 (VIOLATED) +_086_/B 1.25 5.00 -3.75 (VIOLATED) +_084_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__087__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_085_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__068__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_061_/A0 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__077__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_069_/B 1.25 5.00 -3.75 (VIOLATED) +_079_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__076__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_074_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__074__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__078__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_076_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__086__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__069__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_075_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__062__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_077_/B 1.25 5.00 -3.75 (VIOLATED) +_078_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__091__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_088_/B 1.25 5.00 -3.75 (VIOLATED) +_091_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__090__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__092__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__082__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_082_/B 1.25 5.00 -3.75 (VIOLATED) +_083_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__072__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_073_/B 1.25 5.00 -3.75 (VIOLATED) +_092_/B 1.25 5.00 -3.75 (VIOLATED) +_080_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__079__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__083__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_093_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__093__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_clock_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_clock/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input2_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_071_/B 1.25 5.00 -3.75 (VIOLATED) +_090_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input3_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__075__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__073__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__070__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_068_/B 1.25 5.00 -3.75 (VIOLATED) +input3/A 1.25 5.00 -3.75 (VIOLATED) +_070_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input5_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +input2/A 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_load/A 1.25 5.00 -3.75 (VIOLATED) +input5/A 1.25 5.00 -3.75 (VIOLATED) +input4/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input4_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_062_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_load_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input1_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__071__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_072_/B 1.25 5.00 -3.75 (VIOLATED) +input1/A 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[0] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[10] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[11] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[12] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[1] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[2] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[3] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[4] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[5] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[6] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[7] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[8] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[9] 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_out 1.25 5.00 -3.75 (VIOLATED) +pad_gpio_in 1.25 5.00 -3.75 (VIOLATED) +resetn 1.25 5.00 -3.75 (VIOLATED) +serial_clock 1.25 5.00 -3.75 (VIOLATED) +serial_data_in 1.25 5.00 -3.75 (VIOLATED) +serial_load 1.25 5.00 -3.75 (VIOLATED) +user_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +user_gpio_out 1.25 5.00 -3.75 (VIOLATED) + +max fanout + +Pin Limit Fanout Slack +--------------------------------------------------------- +clkbuf_1_0__f_serial_clock/X 7 9 -2 (VIOLATED) +clkbuf_1_1__f_serial_load/X 7 8 (VIOLATED) +fanout30/X 7 8 (VIOLATED) + + +======================= Fastest Corner =================================== + +max slew + +Pin Limit Slew Slack +------------------------------------------------------------ +ANTENNA__080__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__081__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_081_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__061__A0/DIODE 1.25 5.00 -3.75 (VIOLATED) +_087_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__089__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__084__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__085__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__088__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_086_/B 1.25 5.00 -3.75 (VIOLATED) +_089_/B 1.25 5.00 -3.75 (VIOLATED) +_084_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__087__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_085_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__068__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_061_/A0 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__077__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_069_/B 1.25 5.00 -3.75 (VIOLATED) +_079_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__076__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_074_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__074__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__078__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_076_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__086__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__069__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_075_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__062__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_077_/B 1.25 5.00 -3.75 (VIOLATED) +_078_/B 1.25 5.00 -3.75 (VIOLATED) +_088_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__091__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_091_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__090__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__092__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__082__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_082_/B 1.25 5.00 -3.75 (VIOLATED) +_083_/B 1.25 5.00 -3.75 (VIOLATED) +_092_/B 1.25 5.00 -3.75 (VIOLATED) +_073_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__072__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_080_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__079__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__083__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_093_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__093__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_clock_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_clock/A 1.25 5.00 -3.75 (VIOLATED) +_071_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input2_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_090_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input3_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__075__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__073__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_068_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__070__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +input3/A 1.25 5.00 -3.75 (VIOLATED) +_070_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input5_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +input2/A 1.25 5.00 -3.75 (VIOLATED) +clkbuf_0_serial_load/A 1.25 5.00 -3.75 (VIOLATED) +input5/A 1.25 5.00 -3.75 (VIOLATED) +input4/A 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input4_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +_062_/B 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_clkbuf_0_serial_load_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA_input1_A/DIODE 1.25 5.00 -3.75 (VIOLATED) +ANTENNA__071__B/DIODE 1.25 5.00 -3.75 (VIOLATED) +_072_/B 1.25 5.00 -3.75 (VIOLATED) +input1/A 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[0] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[10] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[11] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[12] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[1] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[2] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[3] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[4] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[5] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[6] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[7] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[8] 1.25 5.00 -3.75 (VIOLATED) +gpio_defaults[9] 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +mgmt_gpio_out 1.25 5.00 -3.75 (VIOLATED) +pad_gpio_in 1.25 5.00 -3.75 (VIOLATED) +resetn 1.25 5.00 -3.75 (VIOLATED) +serial_clock 1.25 5.00 -3.75 (VIOLATED) +serial_data_in 1.25 5.00 -3.75 (VIOLATED) +serial_load 1.25 5.00 -3.75 (VIOLATED) +user_gpio_oeb 1.25 5.00 -3.75 (VIOLATED) +user_gpio_out 1.25 5.00 -3.75 (VIOLATED) + +max fanout + +Pin Limit Fanout Slack +--------------------------------------------------------- +clkbuf_1_0__f_serial_clock/X 7 9 -2 (VIOLATED) +clkbuf_1_1__f_serial_load/X 7 8 (VIOLATED) +fanout30/X 7 8 (VIOLATED) + + +=========================================================================== +max slew violation count 92 +max fanout violation count 3 +max cap violation count 0 +============================================================================ diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.tns.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.tns.rpt new file mode 100644 index 00000000..d3d84b63 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.tns.rpt @@ -0,0 +1,5 @@ + +=========================================================================== + report_tns +============================================================================ +tns 0.00 diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.wns.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.wns.rpt new file mode 100644 index 00000000..3b7f8643 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.wns.rpt @@ -0,0 +1,5 @@ + +=========================================================================== + report_wns +============================================================================ +wns 0.00 diff --git a/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.worst_slack.rpt b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.worst_slack.rpt new file mode 100644 index 00000000..ac909f86 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/33-rcx_mca_sta.worst_slack.rpt @@ -0,0 +1,10 @@ + +=========================================================================== + report_worst_slack -max (Setup) +============================================================================ +worst slack 11.12 + +=========================================================================== + report_worst_slack -min (Hold) +============================================================================ +worst slack 0.11 diff --git a/signoff/gpio_control_block/openlane-signoff/34-irdrop.rpt b/signoff/gpio_control_block/openlane-signoff/34-irdrop.rpt new file mode 100644 index 00000000..e0215255 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/34-irdrop.rpt @@ -0,0 +1,216 @@ +Instance name, X location, Y location, Voltage +_131_, 38.6, 59.84, 1.8 +_071_, 38.6, 54.4, 1.8 +_115_, 38.6, 54.4, 1.8 +hold3, 38.6, 54.4, 1.8 +_114_, 38.6, 48.96, 1.8 +hold5, 38.6, 48.96, 1.8 +hold6, 38.6, 48.96, 1.8 +hold7, 38.6, 48.96, 1.8 +_100__8, 38.6, 43.52, 1.8 +_109_, 38.6, 43.52, 1.8 +hold10, 38.6, 43.52, 1.8 +hold2, 38.6, 43.52, 1.8 +ANTENNA__070__B, 38.6, 38.08, 1.8 +_108_, 38.6, 38.08, 1.8 +_129_, 38.6, 38.08, 1.8 +hold9, 38.6, 38.08, 1.8 +ANTENNA__093__B, 38.6, 32.64, 1.8 +_061_, 38.6, 32.64, 1.8 +_096__4, 38.6, 32.64, 1.8 +_113_, 38.6, 32.64, 1.8 +ANTENNA__083__B, 38.6, 27.2, 1.8 +_066_, 38.6, 27.2, 1.8 +_082_, 38.6, 27.2, 1.8 +_083_, 38.6, 27.2, 1.8 +output17, 38.6, 27.2, 1.8 +ANTENNA__069__B, 38.6, 21.76, 1.8 +ANTENNA__092__B, 38.6, 21.76, 1.8 +_069_, 38.6, 21.76, 1.8 +_074_, 38.6, 21.76, 1.8 +_085_, 38.6, 21.76, 1.8 +output16, 38.6, 21.76, 1.8 +ANTENNA__074__B, 38.6, 16.32, 1.8 +_058__1, 38.6, 16.32, 1.8 +_067_, 38.6, 16.32, 1.8 +_084_, 38.6, 16.32, 1.8 +_102__10, 38.6, 16.32, 1.8 +output15, 38.6, 16.32, 1.8 +spare_cell, 38.6, 16.32, 1.8 +_133_, 38.6, 10.88, 1.8 +fanout31, 38.6, 10.88, 1.8 +ANTENNA__081__B, 38.6, 5.44, 1.8 +ANTENNA__082__A, 38.6, 5.44, 1.8 +ANTENNA__084__B, 38.6, 5.44, 1.8 +ANTENNA__085__B, 38.6, 5.44, 1.8 +ANTENNA__087__B, 38.6, 5.44, 1.8 +ANTENNA_input5_A, 38.6, 5.44, 1.8 +input1, 38.6, 5.44, 1.8 +output12, 38.6, 5.44, 1.8 +output7, 38.6, 5.44, 1.8 +_072_, 13.6, 54.4, 1.8 +_107_, 13.6, 54.4, 1.8 +_110_, 13.6, 48.96, 1.8 +_119_, 13.6, 48.96, 1.8 +fanout26, 13.6, 48.96, 1.8 +_130_, 13.6, 43.52, 1.8 +hold8, 13.6, 43.52, 1.8 +output20, 13.6, 43.52, 1.8 +_111_, 13.6, 38.08, 1.8 +_123_, 13.6, 38.08, 1.8 +_116_, 13.6, 32.64, 1.8 +hold12, 13.6, 32.64, 1.8 +_126_, 13.6, 27.2, 1.8 +clkbuf_1_1__f_serial_clock, 13.6, 27.2, 1.8 +fanout23, 13.6, 27.2, 1.8 +ANTENNA__077__B, 13.6, 5.44, 1.8 +ANTENNA__078__B, 13.6, 5.44, 1.8 +ANTENNA__080__B, 13.6, 5.44, 1.8 +ANTENNA_fanout27_A, 13.6, 5.44, 1.8 +ANTENNA_input2_A, 13.6, 5.44, 1.8 +PHY_2, 13.6, 5.44, 1.8 +_059__14, 13.6, 5.44, 1.8 +_098__6, 13.6, 5.44, 1.8 +PHY_12, 15.18, 21.76, 1.8 +PHY_14, 15.18, 21.76, 1.8 +PHY_16, 15.18, 21.76, 1.8 +_077_, 15.18, 21.76, 1.8 +_090_, 15.18, 21.76, 1.8 +clkbuf_1_0__f_serial_load, 15.18, 21.76, 1.8 +fanout25, 15.18, 21.76, 1.8 +PHY_13, 51.98, 21.76, 1.8 +PHY_15, 51.98, 21.76, 1.8 +_064_, 51.98, 21.76, 1.8 +input5, 51.98, 21.76, 1.8 +_117_, 26.89, 21.76, 1.8 +_134_, 26.89, 21.76, 1.8 +output18, 26.89, 21.76, 1.8 +ANTENNA_clkbuf_0_serial_clock_A, 15.18, 16.32, 1.8 +PHY_10, 15.18, 16.32, 1.8 +PHY_8, 15.18, 16.32, 1.8 +_091_, 15.18, 16.32, 1.8 +output10, 15.18, 16.32, 1.8 +serial_load_out_buffer, 15.18, 16.32, 1.8 +PHY_11, 51.98, 16.32, 1.8 +PHY_9, 51.98, 16.32, 1.8 +_087_, 51.98, 16.32, 1.8 +_076_, 26.89, 16.32, 1.8 +input4, 26.89, 16.32, 1.8 +output13, 26.89, 16.32, 1.8 +output14, 26.89, 16.32, 1.8 +ANTENNA__090__B, 15.18, 10.88, 1.8 +PHY_4, 15.18, 10.88, 1.8 +PHY_6, 15.18, 10.88, 1.8 +_089_, 15.18, 10.88, 1.8 +_094__2, 15.18, 10.88, 1.8 +_097__5, 15.18, 10.88, 1.8 +fanout28, 15.18, 10.88, 1.8 +serial_clock_out_buffer, 15.18, 10.88, 1.8 +zero_buffer, 15.18, 10.88, 1.8 +PHY_5, 51.98, 10.88, 1.8 +PHY_7, 51.98, 10.88, 1.8 +_086_, 51.98, 10.88, 1.8 +input3, 51.98, 10.88, 1.8 +ANTENNA__061__A0, 26.89, 10.88, 1.8 +ANTENNA__062__B, 26.89, 10.88, 1.8 +ANTENNA__076__B, 26.89, 10.88, 1.8 +ANTENNA__086__B, 26.89, 10.88, 1.8 +ANTENNA_input3_A, 26.89, 10.88, 1.8 +ANTENNA_input4_A, 26.89, 10.88, 1.8 +_103__11, 26.89, 10.88, 1.8 +_104__12, 26.89, 10.88, 1.8 +_105__13, 26.89, 10.88, 1.8 +output11, 26.89, 10.88, 1.8 +output9, 26.89, 10.88, 1.8 +PHY_40, 4.6, 59.84, 1.8 +PHY_41, 51.98, 59.84, 1.8 +_065_, 51.98, 59.84, 1.8 +output21, 26.1, 59.84, 1.8 +PHY_36, 4.6, 54.4, 1.8 +PHY_38, 4.6, 54.4, 1.8 +_099__7, 4.6, 54.4, 1.8 +_132_, 4.6, 54.4, 1.8 +fanout27, 4.6, 54.4, 1.8 +output22, 4.6, 54.4, 1.8 +PHY_37, 51.98, 54.4, 1.8 +PHY_39, 51.98, 54.4, 1.8 +_062_, 51.98, 54.4, 1.8 +fanout24, 26.1, 54.4, 1.8 +hold1, 26.1, 54.4, 1.8 +ANTENNA__071__B, 4.6, 48.96, 1.8 +ANTENNA_clkbuf_0_serial_load_A, 4.6, 48.96, 1.8 +PHY_32, 4.6, 48.96, 1.8 +PHY_34, 4.6, 48.96, 1.8 +_120_, 4.6, 48.96, 1.8 +_122_, 4.6, 48.96, 1.8 +PHY_33, 51.98, 48.96, 1.8 +PHY_35, 51.98, 48.96, 1.8 +_068_, 51.98, 48.96, 1.8 +_081_, 51.98, 48.96, 1.8 +_106_, 26.1, 48.96, 1.8 +_112_, 26.1, 48.96, 1.8 +hold4, 26.1, 48.96, 1.8 +ANTENNA__079__B, 4.6, 43.52, 1.8 +PHY_28, 4.6, 43.52, 1.8 +PHY_30, 4.6, 43.52, 1.8 +_121_, 4.6, 43.52, 1.8 +hold13, 4.6, 43.52, 1.8 +PHY_29, 51.98, 43.52, 1.8 +PHY_31, 51.98, 43.52, 1.8 +_079_, 51.98, 43.52, 1.8 +_070_, 26.1, 43.52, 1.8 +PHY_24, 4.6, 38.08, 1.8 +PHY_26, 4.6, 38.08, 1.8 +_080_, 4.6, 38.08, 1.8 +_095__3, 4.6, 38.08, 1.8 +clkbuf_0_serial_load, 4.6, 38.08, 1.8 +output19, 4.6, 38.08, 1.8 +PHY_25, 51.98, 38.08, 1.8 +PHY_27, 51.98, 38.08, 1.8 +_075_, 51.98, 38.08, 1.8 +_073_, 26.1, 38.08, 1.8 +_093_, 26.1, 38.08, 1.8 +_127_, 26.1, 38.08, 1.8 +_128_, 26.1, 38.08, 1.8 +ANTENNA__073__B, 4.6, 32.64, 1.8 +ANTENNA__075__B, 4.6, 32.64, 1.8 +PHY_20, 4.6, 32.64, 1.8 +PHY_22, 4.6, 32.64, 1.8 +_124_, 4.6, 32.64, 1.8 +_125_, 4.6, 32.64, 1.8 +PHY_21, 51.98, 32.64, 1.8 +PHY_23, 51.98, 32.64, 1.8 +_060_, 51.98, 32.64, 1.8 +hold11, 26.1, 32.64, 1.8 +PHY_18, 4.6, 27.2, 1.8 +_078_, 4.6, 27.2, 1.8 +_088_, 4.6, 27.2, 1.8 +clkbuf_0_serial_clock, 4.6, 27.2, 1.8 +clkbuf_1_1__f_serial_load, 4.6, 27.2, 1.8 +ANTENNA__082__B, 51.98, 27.2, 1.8 +PHY_17, 51.98, 27.2, 1.8 +PHY_19, 51.98, 27.2, 1.8 +_063_, 51.98, 27.2, 1.8 +_092_, 26.1, 27.2, 1.8 +_118_, 26.1, 27.2, 1.8 +PHY_0, 4.6, 5.44, 1.8 +clkbuf_1_0__f_serial_clock, 4.6, 5.44, 1.8 +ANTENNA__068__B, 51.98, 5.44, 1.8 +PHY_1, 51.98, 5.44, 1.8 +PHY_3, 51.98, 5.44, 1.8 +const_source, 51.98, 5.44, 1.8 +fanout29, 51.98, 5.44, 1.8 +fanout30, 51.98, 5.44, 1.8 +input2, 51.98, 5.44, 1.8 +ANTENNA__072__B, 26.1, 5.44, 1.8 +ANTENNA__088__B, 26.1, 5.44, 1.8 +ANTENNA__089__B, 26.1, 5.44, 1.8 +ANTENNA__091__B, 26.1, 5.44, 1.8 +ANTENNA_fanout28_A, 26.1, 5.44, 1.8 +ANTENNA_fanout29_A, 26.1, 5.44, 1.8 +ANTENNA_input1_A, 26.1, 5.44, 1.8 +_101__9, 26.1, 5.44, 1.8 +one_buffer, 26.1, 5.44, 1.8 +output6, 26.1, 5.44, 1.8 +output8, 26.1, 5.44, 1.8 + diff --git a/signoff/gpio_control_block/openlane-signoff/41-antenna_violators.rpt b/signoff/gpio_control_block/openlane-signoff/41-antenna_violators.rpt new file mode 100644 index 00000000..0519ecba --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/41-antenna_violators.rpt @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/signoff/gpio_control_block/openlane-signoff/drc.klayout.xml b/signoff/gpio_control_block/openlane-signoff/drc.klayout.xml new file mode 100644 index 00000000..9f43f69f --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/drc.klayout.xml @@ -0,0 +1,10 @@ + + + + + + gpio_control_block + + + + diff --git a/signoff/gpio_control_block/openlane-signoff/drc.rdb b/signoff/gpio_control_block/openlane-signoff/drc.rdb new file mode 100644 index 00000000..be0f8cfc --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/drc.rdb @@ -0,0 +1 @@ +$gpio_control_block 100 diff --git a/signoff/gpio_control_block/openlane-signoff/drc.rpt b/signoff/gpio_control_block/openlane-signoff/drc.rpt new file mode 100644 index 00000000..17f53754 --- /dev/null +++ b/signoff/gpio_control_block/openlane-signoff/drc.rpt @@ -0,0 +1,5 @@ +gpio_control_block +---------------------------------------- +[INFO]: COUNT: 0 +[INFO]: Should be divided by 3 or 4 + diff --git a/signoff/gpio_control_block/openlane-signoff/drc.tcl b/signoff/gpio_control_block/openlane-signoff/drc.tcl new file mode 100644 index 00000000..e69de29b diff --git a/signoff/gpio_control_block/openlane-signoff/drc.tr b/signoff/gpio_control_block/openlane-signoff/drc.tr new file mode 100644 index 00000000..e69de29b