caravel/verilog/dv/cocotb/tests/gpio/gpio.py

import random
import cocotb
from cocotb.triggers import FallingEdge,RisingEdge,ClockCycles
import cocotb.log
from interfaces.cpu import RiskV
from interfaces.defsParser import Regs
from cocotb.result import TestSuccess
from tests.common_functions.test_functions import *
from tests.bitbang.bitbang_functions import *
from interfaces.caravel import GPIO_MODE
from cocotb.binary import BinaryValue

reg = Regs()

@cocotb.test()
@repot_test
async def gpio_all_o(dut):
    caravelEnv,clock = await test_configure(dut,timeout_cycles=586652)
    cpu = RiskV(dut)
    cpu.cpu_force_reset()
    cpu.cpu_release_reset()
   
    await wait_reg1(cpu,caravelEnv,0xAA)
    await caravelEnv.release_csb()
    cocotb.log.info("[TEST] finish configuring ")
    i= 0x20
    for j in range(5):
        await wait_reg2(cpu,caravelEnv,37-j)
        cocotb.log.info(f'[Test] gpio out = {caravelEnv.monitor_gpio((37,0))} j = {j}')
        if caravelEnv.monitor_gpio((37,0)).integer != i<<32:
            cocotb.log.error(f'[TEST] Wrong gpio high bits output {caravelEnv.monitor_gpio((37,0))} instead of {bin(i<<32)}')
        await wait_reg2(cpu,caravelEnv,0)
        if caravelEnv.monitor_gpio((37,0)).integer != 0:
            cocotb.log.error(f'[TEST] Wrong gpio output {caravelEnv.monitor_gpio((37,0))} instead of {bin(0x00000)}')
        i = i >> 1
        i |= 0x20

    i= 0x80000000
    for j in range(32):
        await wait_reg2(cpu,caravelEnv,32-j)
        cocotb.log.info(f'[Test] gpio out = {caravelEnv.monitor_gpio((37,0))} j = {j}')
        if caravelEnv.monitor_gpio((37,32)).integer != 0x3f:
            cocotb.log.error(f'[TEST] Wrong gpio high bits output {caravelEnv.monitor_gpio((37,32))} instead of {bin(0x3f)} ')
        if caravelEnv.monitor_gpio((31,0)).integer != i :
            cocotb.log.error(f'[TEST] Wrong gpio low bits output {caravelEnv.monitor_gpio((31,0))} instead of {bin(i)}')
        await wait_reg2(cpu,caravelEnv,0)
        if caravelEnv.monitor_gpio((37,0)).integer != 0:
            cocotb.log.error(f'Wrong gpio output {caravelEnv.monitor_gpio((37,0))} instead of {bin(0x00000)}')

        i = i >> 1
        i |= 0x80000000

    await wait_reg1(cpu,caravelEnv,0XBB)
    data_in = 0x8F66FD7B
    cocotb.log.info(f"[TEST] try drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    reg2 =0
    await wait_reg1(cpu,caravelEnv,0XFF)
    try:
        reg2 =cpu.read_debug_reg2()
        if reg2 == data_in:
            cocotb.log.error(f"[TEST] Error: data {hex(data_in)} driven on gpio[31:0]  is seen by firmware while gpios are configured as output")
        else: 
            cocotb.log.info(f"[TEST] driven data {hex(data_in)} sent can't be sent to gpio[31:0] when it configure as output it can see {reg2}")
    except Exception as e:
        cocotb.log.info(f"[TEST] driven data {hex(data_in)} sent can't be sent to gpio[31:0] when it configure as output")
        return
    
   
    await ClockCycles(caravelEnv.clk, 10)



@cocotb.test()
@repot_test
async def gpio_all_i(dut):
    caravelEnv,clock = await test_configure(dut,timeout_cycles=56837)
    cpu = RiskV(dut)
    cpu.cpu_force_reset()
    cpu.cpu_release_reset()
    await wait_reg1(cpu,caravelEnv,0xAA)
    cocotb.log.info(f"[TEST] configuration finished")
    data_in = 0xFFFFFFFF
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    await wait_reg1(cpu,caravelEnv,0xBB)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0xAAAAAAAA
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    await wait_reg1(cpu,caravelEnv,0xCC)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0x55555555
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    await wait_reg1(cpu,caravelEnv,0xDD)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0x0
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    await wait_reg1(cpu,caravelEnv,0xD1)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0x3F
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in)
    await wait_reg1(cpu,caravelEnv,0xD2)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[37:32]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datah has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0x0
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in)
    await wait_reg1(cpu,caravelEnv,0xD3)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[37:32]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datah has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0x15
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in)
    await wait_reg1(cpu,caravelEnv,0xD4)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[37:32]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datah has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0x2A
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in) 
    await wait_reg1(cpu,caravelEnv,0XD5) 
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[37:32]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datah has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    caravelEnv.release_gpio((37,0))
    await wait_reg2(cpu,caravelEnv,0XFF) 
    if caravelEnv.monitor_gpio((37,0)).binstr != "zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz":
        cocotb.log.error(f"[TEST] ERROR: firmware can write to the gpios while they are configured as input_nopull gpio= {caravelEnv.monitor_gpio((37,0))}")
    else:
        cocotb.log.info(f"[TEST] [TEST] PASS: firmware cannot write to the gpios while they are configured as input_nopull gpio= {caravelEnv.monitor_gpio((37,0))}")
    cocotb.log.info(f"[TEST] finish")


@cocotb.test()
@repot_test
async def gpio_all_i_pu(dut):
    caravelEnv,clock = await test_configure(dut,timeout_cycles=58961,num_error=2000)
    cpu = RiskV(dut)
    cpu.cpu_force_reset()
    cpu.cpu_release_reset()
    uut = dut.uut

    await wait_reg1(cpu,caravelEnv,0xAA)
    await caravelEnv.release_csb()
    # monitor the output of padframe module it suppose to be all ones  when no input is applied
    await ClockCycles(caravelEnv.clk,100) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "1":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pullup and float")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive gpios with zero 
    data_in =  0x0
    caravelEnv.drive_gpio_in((37,0),data_in)
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "0":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pullup and drived with 0")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive gpios with ones 
    data_in =  0x3FFFFFFFFF
    caravelEnv.drive_gpio_in((37,0),data_in)
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "1":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pullup and drived with 1")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive odd half gpios with zeros and float other half
    data_in =  0x0
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(0,38,2):
        caravelEnv.release_gpio(i) # release even gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if i%2 ==1: #odd
            if gpio[i]!="1":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pullup and drived with odd half with 0")
        else:
            if gpio[i] != "0":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pullup and drived with odd half with 0")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive even half gpios with zeros and float other half
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(1,38,2):
        caravelEnv.release_gpio(i) # release odd gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if i%2 ==1: #odd
            if gpio[i] != "0":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pullup and drived with even half with 0")
        else:
            if gpio[i]!="1":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pullup and drived with even half with 0")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive odd half gpios with ones and float other half
    data_in =  0x3FFFFFFFFF
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(0,38,2):
        caravelEnv.release_gpio(i) # release even gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i]!="1":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pullup and drived with odd half with 1")
    
    await ClockCycles(caravelEnv.clk,1000) 
    # drive even half gpios with zeros and float other half
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(1,38,2):
        caravelEnv.release_gpio(i) # release odd gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "1":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pullup and drived with even half with 1")
       
    await ClockCycles(caravelEnv.clk,1000) 

    # drive with zeros then release all gpio
    data_in =  0x0
    caravelEnv.drive_gpio_in((37,0),data_in)
    await ClockCycles(caravelEnv.clk,1000) 
    caravelEnv.release_gpio((37,0))
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "1":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pullup and all released")
    await ClockCycles(caravelEnv.clk,1000) 


@cocotb.test()
@repot_test
async def gpio_all_i_pd(dut):
    caravelEnv,clock = await test_configure(dut,timeout_cycles=58961,num_error=2000)
    cpu = RiskV(dut)
    cpu.cpu_force_reset()
    cpu.cpu_release_reset()
    uut = dut.uut
    
    await wait_reg1(cpu,caravelEnv,0xAA)
    await caravelEnv.release_csb()
    # monitor the output of padframe module it suppose to be all ones  when no input is applied
    await ClockCycles(caravelEnv.clk,100) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "0":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pulldown and float")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive gpios with zero 
    data_in =  0x0
    caravelEnv.drive_gpio_in((37,0),data_in)
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "0":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pulldown and drived with 0")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive gpios with ones 
    data_in =  0x3FFFFFFFFF
    caravelEnv.drive_gpio_in((37,0),data_in)
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "1":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pulldown and drived with 1")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive odd half gpios with zeros and float other half
    data_in =  0x0
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(0,38,2):
        caravelEnv.release_gpio(i) # release even gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i]!="0":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pulldown and drived with odd half with 0")
       
    await ClockCycles(caravelEnv.clk,1000) 
    # drive even half gpios with zeros and float other half
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(1,38,2):
        caravelEnv.release_gpio(i) # release odd gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i]!="0":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pulldown and drived with even half with 0")
    await ClockCycles(caravelEnv.clk,1000) 
    # drive odd half gpios with ones and float other half
    data_in =  0x3FFFFFFFFF
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(0,38,2):
        caravelEnv.release_gpio(i) # release even gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if i%2 ==0: #even
            if gpio[i]!="1":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pulldown and drived with odd half with 1")
        else:
            if gpio[i] != "0":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pulldown and drived with odd half with 1")
    
    await ClockCycles(caravelEnv.clk,1000) 
    # drive even half gpios with zeros and float other half
    caravelEnv.drive_gpio_in((37,0),data_in)
    for i in range(1,38,2):
        caravelEnv.release_gpio(i) # release odd gpios
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if i%2 ==1: #odd
            if gpio[i]!="1":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 1 while configured as input pulldown and drived with odd half with 1")
        else:
            if gpio[i] != "0":
                cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pulldown and drived with odd half with 1")

    await ClockCycles(caravelEnv.clk,1000) 

    # drive with ones then release all gpio
    data_in =  0x3FFFFFFFFF
    caravelEnv.drive_gpio_in((37,0),data_in)
    await ClockCycles(caravelEnv.clk,1000) 
    caravelEnv.release_gpio((37,0))
    await ClockCycles(caravelEnv.clk,1000) 
    gpio = dut.uut.padframe.mprj_io_in.value.binstr
    for i in range(38):
        if gpio[i] != "0":
            cocotb.log.error(f"[TEST] gpio[{i}] is having wrong value {gpio[i]} instead of 0 while configured as input pulldown and all released")
    await ClockCycles(caravelEnv.clk,1000) 

@cocotb.test()
@repot_test
async def gpio_all_bidir(dut):
    caravelEnv,clock = await test_configure(dut,timeout_cycles=1144980)
    cpu = RiskV(dut)
    cpu.cpu_force_reset()
    cpu.cpu_release_reset()
    uut = dut.uut
    await wait_reg1(cpu,caravelEnv,0x1A)
    await caravelEnv.release_csb()
    cocotb.log.info("[TEST] finish configuring ")
    i= 0x20
    for j in range(5):
        await wait_reg2(cpu,caravelEnv,37-j)
        cocotb.log.info(f'[Test] gpio out = {caravelEnv.monitor_gpio((37,0))} j = {j}')
        if caravelEnv.monitor_gpio((37,0)).integer != i << 32:
            cocotb.log.error(f'[TEST] Wrong gpio high bits output {caravelEnv.monitor_gpio((37,0))} instead of {bin(i << 32)}')
        await wait_reg2(cpu,caravelEnv,0)
        if caravelEnv.monitor_gpio((37,0)).integer != 0:
            cocotb.log.error(f'[TEST] Wrong gpio output {caravelEnv.monitor_gpio((37,0))} instead of {bin(0x00000)}')
        i = i >> 1
        i |= 0x20

    i= 0x80000000
    for j in range(32):
        await wait_reg2(cpu,caravelEnv,32-j)
        cocotb.log.info(f'[Test] gpio out = {caravelEnv.monitor_gpio((37,0))} j = {j}')
        if caravelEnv.monitor_gpio((37,32)).integer != 0x3f:
            cocotb.log.error(f'[TEST] Wrong gpio high bits output {caravelEnv.monitor_gpio((37,32))} instead of {bin(0x3f)} ')
        if caravelEnv.monitor_gpio((31,0)).integer != i :
            cocotb.log.error(f'[TEST] Wrong gpio low bits output {caravelEnv.monitor_gpio((31,0))} instead of {bin(i)}')
        await wait_reg2(cpu,caravelEnv,0)
        if caravelEnv.monitor_gpio((37,0)).integer != 0:
            cocotb.log.error(f'Wrong gpio output {caravelEnv.monitor_gpio((37,0))} instead of {bin(0x00000)}')

        i = i >> 1
        i |= 0x80000000

    await wait_reg1(cpu,caravelEnv,0x2A)
    cocotb.log.info(f"[TEST] configuration finished")
    data_in = 0x8F66FD7B
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    await wait_reg1(cpu,caravelEnv,0xBB)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0xFFA88C5A
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    await wait_reg1(cpu,caravelEnv,0xCC)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0xC9536346
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[31:0]")
    caravelEnv.drive_gpio_in((31,0),data_in)
    await wait_reg1(cpu,caravelEnv,0xD1)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0xC9536346
    data_in = 0x3F
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in)
    await wait_reg1(cpu,caravelEnv,0xD2)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0xC9536346
    data_in = 0x0
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in)
    await wait_reg1(cpu,caravelEnv,0xD3)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0xC9536346
    data_in = 0x15
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in)
    await wait_reg1(cpu,caravelEnv,0xD4)
    if cpu.read_debug_reg2() == data_in:
        cocotb.log.info(f"[TEST] data {hex(data_in)} sent successfully through gpio[31:0]")
    else: 
        cocotb.log.error(f"[TEST] Error: reg_mprj_datal has recieved wrong data {cpu.read_debug_reg2()} instead of {data_in}")
    data_in = 0xC9536346
    data_in = 0x2A
    cocotb.log.info(f"[TEST] drive {hex(data_in)} to gpio[37:32]")
    caravelEnv.drive_gpio_in((37,32),data_in) 
    await wait_reg2(cpu,caravelEnv,0xFF) 
    cocotb.log.info(f"[TEST] finish")

    await ClockCycles(caravelEnv.clk, 10)