Modification to be able to run after packaging.

alliance/src/documentation/alliance-examples/go-all.sh

@@ -1,11 +1,31 @@
 #!/bin/sh
 
-for B in addaccu16 adder4 amd2901 amd2901-vasy digi divcas4 \
-    multi16b-reg multi4b multi8 multi8b pgcd sqrt32 sqrt8 \
-    mipsR3000 
-do
-  if [ -d $B ]
-  then echo "----- BENCH $B ----- "
-       (cd $B && make clean && make ALLIANCE_EXAMPLES=/dsk/l1/alliance/alliance/src/documentation/alliance-examples)
-  fi
-done
+ if [ -z "$ALLIANCE_TOP" ]; then
+   ALLIANCE_TOP="${HOME}/alliance/Linux.slsoc6x/install"
+ fi
+ if [ "$ALLIANCE_TOP" != "/usr/lib/alliance" ]; then
+   ALLIANCE_BIN=${ALLIANCE_TOP}/bin
+      CELLS_TOP=${ALLIANCE_TOP}/cells
+ else
+   ALLIANCE_BIN=/usr/bin
+      CELLS_TOP=/usr/share/alliance/cells
+ fi
+ TARGET_LIB=${CELLS_TOP}/sxlib
+
+ export ALLIANCE_BIN CELLS_TOP TARGET_LIB
+
+ for B in addaccu16 adder4 amd2901 amd2901-vasy digi divcas4 \
+          multi16b-reg multi4b multi8 multi8b pgcd sqrt32 sqrt8 \
+          mipsR3000 
+ do
+   if [ -d $B ]; then
+     echo "----- BENCH $B ----- "
+     (cd $B && \
+      make clean && \
+      make      ALLIANCE_BIN=${ALLIANCE_BIN} \
+                   CELLS_TOP=${CELLS_TOP}    \
+                  TARGET_LIB=${TARGET_LIB}   \
+           ALLIANCE_EXAMPLES=/dsk/l1/alliance/alliance/src/documentation/alliance-examples \
+     )
+   fi
+ done

alliance/src/documentation/alliance-examples/mipsR3000/sce/Makefile

@@ -6,6 +6,7 @@
 
 # Standart Alliance binary access paths.
  ALLIANCE_BIN  = $(ALLIANCE_TOP)/bin
+ CELLS_TOP     = $(ALLIANCE_TOP)/cells
  
 ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
 
@@ -34,12 +35,12 @@ ALLIANCE_EXAMPLES=/usr/share/doc/alliance-doc-5.0/alliance-examples
  EXTRACT_PH   = ap
  GENERAT_SP   = .
  EXTRACT_SP   = .
-    CATA_LIB0 = $(ALLIANCE_TOP)/cells/sxlib
-    CATA_LIB1 = $(ALLIANCE_TOP)/cells/dp_sxlib
-    CATA_LIB2 = $(ALLIANCE_TOP)/cells/padlib
-    CATA_LIB3 = $(ALLIANCE_TOP)/cells/rflib
+    CATA_LIB0 = $(CELLS_TOP)/sxlib
+    CATA_LIB1 = $(CELLS_TOP)/dp_sxlib
+    CATA_LIB2 = $(CELLS_TOP)/padlib
+    CATA_LIB3 = $(CELLS_TOP)/rflib
     CATA_LIB  = .:$(CATA_LIB0):$(CATA_LIB1):$(CATA_LIB2):$(CATA_LIB3)
-   TARGET_LIB = $(ALLIANCE_TOP)/cells/sxlib
+   TARGET_LIB = $(CELLS_TOP)/sxlib
     FPGEN_LIB = $(CATA_LIB0):$(CATA_LIB1)
   TECHNO_NAME = local-cmos
   CARAC_TECHNO_NAME = local-cmos-035